Road Safe Cat

BALL JOINT BALL JOINT IDLER TIE ROD END TIE ROD END TIE ROD END TIE
ROD END TIE ROD END RACK SIDE CENTRE DRAG PITMAN SWAY
UPPER LOWER / L/H OUTER R/H OUTER L/H INNER R/H INNER END ROD ROD LINK BAR
KING PIN LINK
SET
YEAR MODEL
ALFA ROMEO
33
1983-on Alfa 33 and Alfa 33 Boxer (5 door) BJ962 TE3620R TE3620R
75
5/85-92 Alfa 75 BJ1158 BJ844 TE1783 TE1783 RE5080 RE5080 - 245mm 14x1.5 (socket) 14x1.5 (tre)
2 bolt mount screw-in (TE3621R) (TE3621R) 14x1.5
90
1984-on Alfa 90 BJ1158 BJ844 TE1783 TE1783 RE5080 RE5080 - 245mm 14x1.5 (socket) 14x1.5 (tre)
2 bolt mount screw-in (TE3621R) (TE3621R) 14x1.5
147
9/01-on Alfa 147 RE6643 Front RE6643 - Built in Damper 220mm Long
STB7021
9/01-on Alfa 147 RE6639 Rear RE6639 - Built in Damper 235mm Long
STB7022
156
1997-on Alfa 156 TE7919 TE7920 RE7923
2/99-4/06 Alfa 156 RE6643 RE6643 - Built in Damper 220mm Long
2/99-4/06 Alfa 156 RE6639 RE6639 - Built in Damper 235mm Long
164
1/87-8/92 Alfa 164 2.0 litre Twin Spark & Twin Spark Super BJ1159 TE2405 TE2405 RE5079 BJ1159 - Ball Stud Diam 13mm
13mm RH Thread RH Thread 14x1.5 NOTE - OEM/TRW previously listed RE1006 to suit
14X1.5 14X1.5 RE5079 application. Check if ordered by part no.
1/87-8/98 Alfa 164 3.0 litre V6 BJ5182 TE2405 TE2405 RE5079 BJ5182 - Ball Stud Diam 15mm
15mm RH Thread RH Thread 14x1.5 NOTE - OEM/TRW previously listed RE1006 to suit
14X1.5 14X1.5 RE5079 application. Check if ordered by part no.
166
8/99-11/08 Alfa 166 TE7919 TE7920 RE6639 Front RE6639 - Built in Damper 235mm Long
STB7023
LH Rear
STB7024
RH Rear
STB7025
ALFA SUD
1974-84 Alfa Sud 1200, 1500 BJ2213 TE3620R TE3620R
Section 2 : Page 1 of 208

BALL JOINT BALL JOINT IDLER TIE ROD END TIE ROD END TIE ROD END TIE ROD END RACK SIDE CENTRE DRAG PITMAN SWAY
KING PIN LINK
SET
YEAR MODEL
ALFETTA, GUILETTA
1974-84 Alfetta, Guiletta 1800, 2000 BJ843 BJ844 TE1783 TE1783
2 bolt mount screw-in (TE3621R) (TE3621R)
1984-87 Alfetta,GTV,Guiletta BJ843 BJ844 TE1783 TE1783 RE879

2 bolt mount screw-in (TE3621R) (TE3621R) GTV V6
BERLINA
1967-on Berlina 1750,2000 BJ159 TE402R TE402R TE402L TE402L RH-TE495R
LH-TE495L
ends only
GUILIA, etc.
1962-78 Guilia,Spider, 1300, 1600 BJ159 TE402R TE402R TE402L TE402L RH-TE495R
LH-TE495L
ends only
1972-76 Montreal, Zagato, Junior BJ159 TE402R TE402R TE402L TE402L RH-TE495R
LH-TE495L
ends only
SPIDER
6/98-on Spider RE6626 RE6626 - 309mm 14x1.5 (socket) 14x1.5 (tre)
p/steer
AMC
1958-61 Ambassador 5880,5980,6080,6180 8cyl SX77 TE423L TE423L
1958-61 Classic, Rebel 58/5920,6020,6120 8cyl SX77 TE423L TE423L
1962-66 Classic 6210,6310,6410, Ambassador, SX77 BJ17 TE423L TE423L TE394R TE394R
Six, Classic Six, Marlin Six 6cyl
1962-66 Ambassador 6280,6380, Ambassador SX77 BJ17 TE423L TE423L TE394R TE394R
Eight, Marlin Eight 8cyl
1964-69 AMX30, Javelin 70, American, Rambler, TE424L TE424L TE424L - 5/8" LH thread USA# ES368L
Rogue 01 (ES368L) (ES368L)
1967-69 Ambassador, Marlin, Rebel SX77 BJ17 TE423L TE423L TE394R TE394R

KING PIN LINK
SET
YEAR MODEL
1970-83 Ambassador 80, AMX30, Gremlin 40, BJ101 BJ102 18741 TE424L TE424L TE424L - 5/8" LH thread USA# ES368L
Hornet (10229) (10228) (ES368L) (ES368L)
1970-78 Matador, Rebel BJ101 BJ102 TE424L TE424L TE424L - 5/8" LH thread USA# ES368L
(10229) (10228) (ES368L) (ES368L)
1970-83 Javelin, Hornet BJ101 BJ102 TE424L TE424L TE424L - 5/8" LH thread USA# ES368L
(10229) (10228) (ES368L) (ES368L)
AUDI
Audi 80
1973-78 1.3, 1.5, 1.6L BJ706 TE1717 TE1717 TE1717 - RHT M14x1.5
BLD-15mm RHT 14x1.5 RHT 14x1.5
1978-81 1.3, 1.5, 1.6L BJ814 TE1717 TE1717

(BJ2023) RHT 14x1.5 RHT 14x1.5
BLD-17mm
7/72-81 80 Fox, GLS BJ814 TE3642R TE3642R BJ2023 - Ball Stud Diam 17mm
(BJ2023)
BLD-17mm
1986-87 1.8lt - to chassis# 81B095000 RH-BJ987 TE1717 TE1717 Front

LH-BJ986 RHT 14x1.5 RHT 14x1.5 STB8094
1986-87 1.8lt - from chassis# 81B095001 RH-BJ987 TE1835 TE1835 Front TE1835 - RHT M14x1.5
1988-91 Quattro 1.8lt - to chassis# 89J351000 RH-BJ987 TE1835 TE1835 Front

1988-91 Quattro 1.8lt - from chassis# 89J351001 RH-BJ1164 TE1835 TE1835 Front BJ1164/BJ1165 - Ball Stud Diam 19mm
1989-on Quattro 2.0lt RH-BJ1164 TE1835 TE1835 Front BJ1164/BJ1165 - Ball Stud Diam 19mm
1993-on Quattro 2.6lt TE1835 TE1835 Front

RHT 14x1.5 RHT 14x1.5 STB8103
Audi 90
1989-91 Quattro 2.3lt RH-BJ1072 TE1835 TE1835 Front

KING PIN LINK
SET
YEAR MODEL
Audi 100
1968-77 LS, GL, 1.6, 1.8, 1.9, 2.0 excl. Coupa BJ721 BJ722 TE1708 TE1708 TE1708 - 1974-77
(1974-77 only) (1974-77 only)
1983-on 2.1, 2.2, 2.3, 2.6, 2.8L TE2065 TE2066
A3
99-04 A3 BJ7151 RE6796 BJ7151 - Control Arm inc. Ball Joint R/L
RE6796 - 337mm 16x1.5 (socket) 14x1.5 (tre)
A4
11/94-11/00 A4 & A4 Avant & A4 Quattro RH-BJ1905R TE9811R TE9811R RE7001 Front RE7001 - 145mm 16x1.5 (socket) F14x1.5 (tre)
LH-BJ1905L RHT 14x1.5 RHT 14x1.5 (RE2821) STB1317
inc. Arm Rear
STB5465
A6
6/94-7/97 A6 & A6 Avant & A6 Quattro RH-BJ1903R TE9813 TE9812
Chassis 4A.S000001 to 4A.V2000000 LH-BJ1903L RHT 16x1.5 RHT 16x1.5
inc. Arm Female Female
8/97-on A6 RH-BJ1903R TE9811R TE9811R RE7001 RE7001 - 145mm 16x1.5 (socket) F14x1.5 (tre)
Chassis 4B.W000001 to 4B.Y20000000 LH-BJ1903L RHT 14x1.5 RHT 14x1.5 (RE2821)
inc. Arm
A8
3/94-on A8 & A8 Quattro BJ1904 TE9811R TE9811R RE7001 Front RE7001 - 145mm 16x1.5 (socket) F14x1.5 (tre)
inc. Arm RHT 14x1.5 RHT 14x1.5 (RE2821) STB7044
Rear
STB7043
S3
9/99-on S3 RE6683
p/steer
TT
3/99-on TT RE6683
p/steer
AUSTIN - see LEYLAND
BEDFORD

KING PIN LINK
SET
YEAR MODEL
CA VAN
1952-54 Bedford CA Van RH-BJ19 KX163 TE106L TE106R TE106R TE106L Lower Outer - SX28
LH-BJ20 Male Male Male Male Upper Inner Control Arm - SX1021A
Lower Inner Control Arm - SX1022A
1955-70 Bedford CA Van (10, 12 Cwt) RH-BJ19 KX163 TE125L TE125R TE125R TE125L Lower Outer - SX28
9600 Series LH-BJ20 Female Female Female Female Upper Inner Control Arm - SX1021A
Lower Inner Control Arm - SX1022A
1957-72 C4,C5,C6 (Petrol) 4-6ton, D5,D6L 5-6ton TE110L TE110R

J4,J5,CD,CF,CJ 5-8ton ex. Factory 10 pieces ea. MOQ
1959-81 Bedford J, TK, E, G Series - inc. J1, J2 & J3 KX196 TE56L TE56R DL370 King pin set .999" x 5.906"
to chassis# IT193139 - 16" WHEELS
1968-76 Bedford COD,COJ,COL (To 4 Ton) KX196 TE56L TE56R DL370 King pin set .999" x 5.906"
1958-77 TJ series,J6,CFQ,CJQ,COQ,7ton,SA,SD,SL,SS KX607 TE342L TE342R King pin set 1.375" x 7.500"
SB,SB3,SB5,NF,NJ, Bus Chassis
1979-on DON,DOQ,DOR,TL1000,TL1020,TL1260 KX250 TE369L TE369R King pin set 1.375" x 7.500"
9.8-16ton
1979-on D & TL series, Fwd.Control, DOA, DOG, KX204 TE368L TE368R King pin set 1.250" x 6.750"
DOL,DOM,TL570,TL750,TL860 5.6-7.37ton
1967-76 MFR,MJR,RF,RJ (M SERIES 4WD) KX607 TE342L TE342R King pin set 1.375" x 7.500"
1971-81 TK & E series, KA,KB,EOF,EOG,EDF,EDG,EHG,EHF KX204 TE368L TE368R King pin set 1.250" x 6.825"
1.5-4ton from chassis# 2T120001
1960-81 EFQ,EJQ,EPQ,EFR,EJR,EPR series 7-8ton KX249 TE369L TE369R King pin set 1.375" x 7.500"
1967-81 EDN,EFN,EJN,EON 6ton to chassis# 1T177868 KX213 TE368L TE368R KX213 = thin bushes .421 thrust brg
KX250 KX250 = wide bushes .625 thrust brg
King pin set 1.375" x 7.500"
1967-81 EDN,EFN,EJN,EON 6ton from chassis# 1T193139 KX213 TE369L TE369R KX213 = thin bushes .421 thrust brg
KX250 KX250 = wide bushes .625 thrust brg
King pin set 1.375" x 7.500"
1968-81 KC,KD,KE,EOL,EOM,EDL,EHC,EDM,EHM,EJM KX204 TE368L TE368R DL258 King pin set 1.250" x 6.825"
3-5ton

KING PIN LINK
SET
YEAR MODEL
CF VAN
1969-87 Bedford CF, 97000 (18-35Cwt) BJ24 BJ268 TE476R TE476R RE5270 BJ268 - To chassis# CY636000
up to chassis# CY636000 41.5mm body
CF Model with Holden Motor diameter
1969-87 Bedford CF, 97000 (18-35Cwt) BJ24 BJ148 TE476R TE476R RE5270 BJ148 - From chassis# DY600001
from chassis# DY600001 43.2mm body
CF Model with Holden Motor diameter
HANDIVAN & BEAGLE

1964-70 Bedford Handi Van, Beagle Estate BJ42 BJ57 TE179R TE179R
BEDFORD - BUSES
1960-76 VAM series bus KX249 TE3406L TE3405R King pin set 1.375" x 7.500"
1960-on BLP series bus KX213 TE3406L TE3405R King pin set 1.375" x 7.500" - .421 thrust brg
1960-on Y series coaches (mid-mount engine) excluding YRQ KX1230 TE6753L TE6752R King pin set 2.000" x 10.000"
1960-on Y series coaches (mid-mount engine) YRQ only KX1230 TE3406L TE3405R King pin set 2.000" x 10.000"
1960-on N series school buses KX250 TE368L TE368R 8848262 King pin set 1.375" x 7.500" - .625 thrust brg
1960-on SB series school buses KX213 TE368L TE369R 8848262 King pin set 1.375" x 7.500" - .421 thrust brg
BMW
Cooper
3/02-on Mini Cooper & "S" R50 RE6632 RE6632 - 200mm 16x1.5 (socket) 14x1.5 (tre)
p/steer
"E" Series
1962-77 E10 - 1500/1502/1600/1602/1660/1800/1802 BJ2213 BJ2212 TE3607R TE3607R TE3606R TE3606R TE3607R - RHT M14x1.5 straight
2000/2002/Ti/Tii 3 bolt mount (TE1161L) (TE1161L) (TE1161R) (TE1161R) TE3606R - LHT M14x1.5 curved
10/68-9/73 E3 - 2500/2800/3.0 TE1786 TE1786 TE1787 TE1787
9/72-5/81 E12 - 5 series RH-BJ4222 TE1786 TE1786 TE1788 TE1788 TR148

LH-BJ4221
6/75-83 E21 - 3 series - Manual Steer RH-BJ845 TE1785 TE1785 RH-RE7002 BJ845/846 - suits 9/75-10/78 only
LH-BJ846 RHT 14x1.5 RHT 14x1.5 LH-RE3045 Rack Ends - Manual Steer
9/75-10/78 m/steer

KING PIN LINK
SET
YEAR MODEL
6/75-83 E21 - 3 series - Power Steer RH-BJ845 TE1785 TE1785 RE4303 BJ845/846 - suits 9/75-10/78 only
LH-BJ846 RHT 14x1.5 RHT 14x1.5 p/steer Rack Ends - Power Steer
9/75-10/78 RE4303 - 250mm 18x1.5 (socket) 14x1.5 (tre)
2/76-5/82 E24 - 6 series TE1786 TE1786 TE1788 TE1788 TR148
5/77-86 E23 - 7 series TE1786 TE1786 TE4204 TE4204 TE7212 TR4205 Rear TE7212 consists of TE1786 x 1 & TE4204 x 1
728/745
STB8148
78-4/89 E24 - 6 series RH-BJ386R TE2234 TE2234 TE2233 TE2233 TR5032 TR4336 Front
LH-BJ385L RH Thread RH Thread LH Thread LH Thread 628/635
inc. Arm Check Threads Prior to Ordering Check Threads Prior to Ordering STB8085
Rear
STB8148
6/81-5/87 E28 - 5 series RH-BJ5004R RH-BJ386R TE2234 TE2234 TE2233 TE2233 TR5032 TR4228 Front TR4228 - 575mm c/c b/w holes
LH-BJ5005L LH-BJ385L RH Thread RH Thread LH Thread LH Thread 518/535
inc. Arm inc. Arm Check Threads Prior to Ordering Check Threads Prior to Ordering STB8085
Rear
STB8148
10/82-5/94 E30 - 3 series BJ997 TE2046 TE2046 RH-RE4305 Front BJ5000R+ARM - Front Lower Arm RH
LH/RH Inner 14x1.5 14x1.5 LH-RE4303 1988-on BJ5001L+ARM - Front Lower Arm LH
BJ998 STB8088 BJ997 - Press In (Long Ball Stud) BLD 14.85
LH/RH Outer (not M3) BJ998 - BLD 14.40
RE4303 & 4305 - interchangeable
10/86-on E32 - 7 series RH-BJ1000R TE2234 TE2234 TE2233 TE2233 TR5032 TR4316 Front BJ1000R+ARM - RH Control Arm
LH-BJ999L RH Thread RH Thread LH Thread LH Thread 1988-on BJ999L+ARM - LH Control Arm
inc. Arm Check Threads Prior to Ordering Check Threads Prior to Ordering STB8088
730/750
STB8085
Rear
STB8148
1988-on E34 - 5 series NOT 518i RH-BJ1098R RH-BJ1184R TE2234 TE2234 TE2233 TE2233 TR5032 TR4336 Front BJ1097/BJ1098 - "front axle upper thrust linkage"
LH-BJ1097L LH-BJ1185L RH Thread RH Thread LH Thread LH Thread not 88-80 BJ1184/BJ1185 - "front axle lower track control
inc. Arm inc. Arm Check Threads Prior to Ordering Check Threads Prior to Ordering 518i STB8088 arm with rubber mounting"
Torque Rods 518/540
STB8085
Rear
STB81120

KING PIN LINK
SET
YEAR MODEL
1988-on E34 - 5 series - 518i ONLY RH-BJ1098R RH-BJ1184R TE2234 TE2234 TE2233 TE2233 TR5032 TR4335 (94mm short) BJ1097/BJ1098 - "front axle upper thrust linkage"
LH-BJ1097L LH-BJ1185L RH Thread RH Thread LH Thread LH Thread inc. STB81121 BJ1184/BJ1185 - "front axle lower track control
inc. Arm inc. Arm Check Threads Prior to Ordering Check Threads Prior to Ordering 518i (132mm long) arm with rubber mounting"
Torque Rods only
1989-on E31 - 8 series TE2234 TE2234 TE2233 TE2233 TR4338 Front

RH Thread RH Thread LH Thread LH Thread STB8085
Check Threads Prior to Ordering Check Threads Prior to Ordering
11/90-on E36 - 3 series RH-BJ1177 TE4341 TE4344 RE4342 Front RE4342 - 230mm 18x1.5 (socket) 14x1.5 (tre)
LH/RH Inner Female 14x1.5 Female 14x1.5 STB8088
long ball stud BLD 12.6mm BLD 12.6mm 1/93-on BJ1177 - BLD 14.85mm
LH-BJ1178 BJ1178 - BLD 14.40mm
LH/RH Outer
short ball stud
or
RH-BJ1177R BJ1177R & BJ1178L do not come with bushings.
LH-BJ1178L If bushings required see W81364
inc. Arm
1994-on E38 - 7 series RH-BJ5022 RH-BJ5020R TE4350 TE4351 Front BJ5020R+ARM - Front Lower Arm RH
LH-BJ5023 LH-BJ5021L (TE2998) (TE2999) STB8086 BJ5021L+ARM - Front Lower Arm LH
inc. Arm inc. Arm Rear
STB8084
1997-01 E39 - 5 series RE7003 Front RE7003 - 195mm 18x1.5 (socket) 16x1.0 (tre)
RH-STB8099
LH-STB8100
Front
STB7049
2/98-on E46 series RE4342 Front RE4342 - 230mm 18x1.5 (socket) 14x1.5 (tre)
316i - 328i STB8145
Rear
STB8146
1/01-on E66 - 7 series TE6369 TE6369 RE6368 Front

Female 16x1.5 RHT Female 16x1.5 RHT RH - STB7839
LH - STB7838
Front
STB7840
"X" Series
5/00-on X5 BJ7997 TE6327 TE6327 RE6602 Front RE6602 - 237mm 18x1.5 (socket) 14x1.5 (tre)

KING PIN LINK
SET
YEAR MODEL
inc. bush & ball joint Female 14x1.5 RHT Female 14x1.5 RHT p/steer RH - STB7836
suit rack 7852-974-878 LH - STB7835
Rear
STB7837
"Z" Series
1989-91 Z1 TE2046 TE2046 Front
STB8088
1/94-on Z3 RH-BJ1177 TE4341 TE4344 RE4342 Front RE4342 - 230mm 18x1.5 (socket) 14x1.5 (tre)
LH/RH Inner Female 14x1.5 Female 14x1.5 STB8088
long ball stud BLD 12.6mm BLD 12.6mm Rear BJ1177 - BLD 14.85mm
LH-BJ1178 STB81120 BJ1178 - BLD 14.40mm
LH/RH Outer
short ball stud
or
RH-BJ1177R BJ1177R & BJ1178L do not come with bushings.
LH-BJ1178L If bushings required see W81364
inc. Arm
2003-on Z4 Track Control Arms TE5957 TE5958 RE6897 Front

RH-BJ8520R+ARM Female 14x1.5 Female 14x1.5 STB8145
LH-BJ8519L+ARM BLD 15.00mm BLD 15.00mm Rear
STB8146
2000-03 Z8 Front
STB8086
Rear
STB8084
BUICK
1938-42 Series 40, 50 18799 TE175L TE175L
1942-49 Series 40, 50 TE52L TE52L
1949-50 Series 40, 50 TE52R TE52R
1938-52 Series 60, 70 TE175L TE175L
1953-56 Series 40, 50, 60, 70 TE52R TE52R
1941-52 Series 90 TE175L TE175L
APOLLO, SKYLARK
1964-72 Skylark, Special BJ54 BJ55 or 18799 TE52R TE52R

KING PIN LINK
SET
YEAR MODEL
BJ55OS (K6187)
oversize
1973-74 Appollo, Skylark (RWD) BJ54 BJ55 or 18718 ES381R ES381R

BJ55OS
oversize
1975-79 Appollo, Skylark (RWD) BJ487 BJ488 ES427R (std) ES427R (std) ES427R - 8.79"
(10268) (10277) or ES441R or ES441R ES441R - 8.12"
(305-153) (rally susp) (rally susp)
ELECTRA,LeSABRE,WILDCAT
1971-76 Electra, LeSabre, Wildcat (RWD) BJ487 10267 18765 ES403R ES403R ES403L ES403L
(10268) (1973-76)
1977-91 Electra, LeSabre Wildcat (RWD) BJ487 BJ488 18799 ES2019R ES2019R ES2020L ES2020L
(10268) (10277)
RIVIERA
1963-70 Riviera 10198
1971-76 Riviera BJ487 10267 ES403R ES403R ES403L ES403L

(10268)
1977-78 Riviera BJ487 BJ488 TE2019R TE2019R TE2020L TE2020L

(10268) (10277) (ES2019R) (ES2019R) (ES2020L) (ES2020L)
(305-153)
CADILLAC
DEVILLE, FLEETWOOD, BROUGHAM
1961-69 Deville, Fleetwood Brougham RH-10211N 10142
LH-10210N
1970-76 Deville, Fleetwood Brougham RH-10211N 10286 18747

LH-10210N

KING PIN LINK
SET
YEAR MODEL
1977-85 Deville, Fleetwood Brougham (RWD) BJ487 BJ488 18799 TE2019R TE2019R TE2020L TE2020L
(10268) (10277) (K6187) (ES2019R) (ES2019R) (ES2020L) (ES2020L)
1986-96 Fleetwood Brougham (RWD) BJ487 BJ488 18799 TE2019R TE2019R TE2020L TE2020L
Not Heavy Duty/Limo/Armoured Body (10268) (10277) (K6187) (ES2019R) (ES2019R) (ES2020L) (ES2020L)
1986-96 Fleetwood Brougham (RWD) BJ487 10267 18799

Heavy Duty/Limo/Armoured Body (10268) (K6187)
SEVILLE
1976-79 Seville BJ487 BJ488 18753 ES427R ES427R
(10268) (10277)
CHEVROLET
1964-72 Beaumont BJ54 BJ55 or
BJ55OS
oversize
BEL AIR, IMPALA, etc.

1955-57 Bel Air, Biscayne, Caprice, Impala BJ70 BJ3 TE57L TE57L ES577 ES577
(10203) buy in (ES234L) (ES234L)
1958-62 Bel Air, Biscayne, Caprice, Impala BJ70 BJ71 18753 310-151 310-151 ES597 ES597
(10203) (10231) (ES312NL) (ES312NL)
1963-64 Bel Air, Biscayne, Caprice, Impala BJ70 BJ71 18753 310-154 310-154 ES597 ES597
(10203) (10231)
1965-66 Bel Air, Biscayne, Caprice, Impala BJ70 BJ71 18672 TE3733 TE3733 TE3725 TE3725
(10203) (10231) (310-171) (310-171) (310-182) (310-182)
1967-68 Bel Air, Biscayne, Caprice, Impala BJ70 BJ71 18703 TE3733 TE3733 TE3725 TE3725
(10203) (10231) (310-171) (310-171) (310-182) (310-182)
1969-70 Bel Air, Biscayne, Caprice, Impala BJ70 BJ71 18703 ES378L ES378L ES378R ES378R
(10203) (10231)
1971-76 Bel Air, Biscayne, Caprice, Impala BJ487 10267 18765 ES403R ES403R ES403L ES403L
(10268) (1973-76)
1977-96 Bel Air, Biscayne, Caprice, Impala BJ487 BJ488 18799 TE2019R TE2019R TE2020L TE2020L
Not Police Car/Wagon (10268) (10277) (K6187) (ES2019R) (ES2019R) (ES2020L) (ES2020L)
1977-96 Bel Air, Biscayne, Caprice, Impala BJ487 10267 18799 TE2019R TE2019R TE2020L TE2020L

KING PIN LINK
SET
YEAR MODEL
Police Car/Wagon (10268) (K6187) (ES2019R) (ES2019R) (ES2020L) (ES2020L)
CAMARO
1967-69 Camaro & Z28 BJ54 BJ55 or 18718 ES381R ES381R 18770 18770 - 5 7/8" stud centre to spline centre
BJ55OS 1968-69 p/steer 18770 - power steer 1968-69; all 1967
oversize 18760 18760 - manual steer excl. 302 engine
m/steer
1970-74 Camaro & Z28 BJ487 BJ488 18753 ES404R ES404R non wear
(10268) (10277)
1975-79 Camaro & Z28 BJ487 BJ488 18753 ES441R ES441R non wear
(10268) (10277)
1980-81 Camaro & Z28 - 6 cylinder BJ487 BJ488 18753 ES427R ES427R ES2001L ES2002L non wear
(10268) (10277)
1980-81 Camaro & Z28 - V8 BJ487 BJ488 18753 ES441R ES441R non wear
(10268) (10277)
1982-92 Camaro & Z28 with BJ488 18832 ES2226R ES2226R ES2227L ES2227L non wear
Mcpherson front strut suspension (10277) NLA NLA
1993-96 Camaro & Z28 with 104233 BJ488 ES3238 ES3238

rack & pinion steering (10277)
CHEVELLE, etc.
1964-72 Chevelle, El Camino, Malibu, & BJ54 BJ55 or
Monte Carlo BJ55OS
oversize
1973-77 Chevelle, El Camino, Malibu, & BJ487 BJ488 ES427R ES427R

Monte Carlo (10268) (10277)
1978-88 Chevelle, El Camino, Malibu, & BJ487 BJ488 18799

Monte Carlo (10268) (10277) (K6187)
CORVETTE
1963-82 Corvette BJ70 BJ71 310-155 310-155 310-154 310-154 Tie rod end orientation might alter depending
(10203) (10231) (ES323R) (ES323R) (ES323L) (ES323L) upon conversion - please check prior to ordering.
1984-85 Corvette 10391 10413
1986-96 Corvette 10391 10413 ES3239 ES3239

KING PIN LINK
SET
YEAR MODEL
NOVA
1968-74 Nova, Chevy II (RWD), Acadian BJ54 BJ55 or 18718 ES381R ES381R 18770
BJ55OS (1968-72
oversize p/steer)
1975-79 Nova, Chevy II (RWD) BJ487 BJ488 18753 ES441R ES441R

(10268) (10277)
CHEVROLET - Commercial
1961-65 R1200 Truck & Bus BJ70 BJ71
(10203) (10231)
C series 2WD inc. BLAZER

1965-70 C10 2WD pickup, Blazer, Suburban 18573 TE3733 TE3733 TE3725 TE3725 18755
(1965-66) (310-171) (310-171) (310-182) (310-182)
1971-72 C10 2WD pickup, Blazer, Suburban 10264 or

with Disc Brakes 104112
(.003" over)
1971-91 C10 2WD pickup, Blazer, Suburban 10269 10264 or 18680 310-212 310-212 310-211 310-211 18755 18680 - both pins same size 17mm BLD
104112 (1973-82) (ES409R) (ES409R) (ES409L) (ES409L) p/steer 18680 - replaces K6096
(.003" over) 18830 18830 - pins different size 17 & 15mm BLD
(1983-91) 18830 - replaces K6247
1960-66 C20 - C30 2WD manual steer 10213 10187 ES358L ES358R ES358R ES358L 18667
1969-70 C20 - C30 2WD power steer 10213 10187 ES358L ES358R ES358R ES358L 18732
1971-91 C20 2WD pickup, Blazer, Suburban - manual steer 305-117 305-114 18680 310-212 310-212 310-211 310-211 315-109 18680 - both pins same size 17mm BLD
(10261) (10258) (1973-82) (ES409R) (ES409R) (ES409L) (ES409L) (18754) 18680 - replaces K6096
18830 18830 - pins different size 17 & 15mm BLD
(1983-91) 18830 - replaces K6247
1971-91 C20 2WD pickup, Blazer, Suburban - power steer 305-117 305-114 18680 310-212 310-212 310-211 310-211 315-110 18680 - both pins same size 17mm BLD
(10261) (10258) (1973-82) (ES409R) (ES409R) (ES409L) (ES409L) (18755) 18680 - replaces K6096
18830 18830 - pins different size 17 & 15mm BLD
(1983-91) 18830 - replaces K6247
1971-91 C30 2WD pickup - manual steer 305-117 305-114 310-212 310-212 310-211 310-211 315-109
(10261) (10258) (ES409R) (ES409R) (ES409L) (ES409L) (18754)

KING PIN LINK
SET
YEAR MODEL
1971-91 C30 2WD pickup - power steer 305-117 305-114 310-212 310-212 310-211 310-211 315-110
(10261) (10258) (ES409R) (ES409R) (ES409L) (ES409L) (18755)
1963-77 C50 - 4ton C60 - 5ton 300-209 310-160 310-161 King pin set 1.179" x 6.360"
5.84" 5.84"
1978-80 C50 - 4ton C60 - 5ton 300-209 310-271 310-272 King pin set 1.179" x 6.360"
4.93" 4.93"
1964-80 C60 7000lb axle 300-173 310-164 310-165 King pin set 1.2495" x 7.880"
(1963-77)
1963-66 C60 9000lb axle 310-115
1988-96 C1500 (1/2 ton) Pickup 2WD BJ497 BJ498 TE3738 TE3738 TE3730 TE3730
1993-96 C2500 (3/4 ton) BJ497 BJ498 190142 TE3738 TE3738 TE3730 TE3730
1989-96 3500 Pickup 104150 190142 - without bracket TE3730 TE3730 190121
190156 - with bracket
K series 4WD inc. BLAZER

1967-91 K20, V20 4WD pickup, Blazer, Suburban BJ490 BJ489 BJ489 - press in Body dia. 44.5mm
(305-112) (10253) BJ490 - press in Body dia. 44.6mm
1967-91 K25, V2500 4WD pickup, Suburban BJ490 BJ489 TE3738 TE3738 BJ489 - press in Body dia. 44.5mm
1970-91 K10, V10 4WD pickup, Blazer, Suburban BJ490 BJ489 BJ489 - press in Body dia. 44.5mm
1970-91 K15, V1500 4WD pickup, Suburban BJ490 BJ489 TE3738 TE3738 BJ489 - press in Body dia. 44.5mm
1982-94 K10 / S10 2WD, Blazer & Pickup BJ487 BJ488 ES2033R ES2033R TE3736 TE3736
(10268) (10277)
LUV
1972-81 Chev Luv KB20, KB25 BJ201 BJ202 TE595L TE595R TR668 BJ201 - please specify if lock nut required
Drag Link Tie Rod Ends TR668 - replacement for inner & outer tie rod ends
BJ202 - 4 bolt mount BLD 17.5mm

KING PIN LINK
SET
YEAR MODEL
1981-85 Chev Luv KB21, KB26, KB27, KB28 BJ203 BJ204 SX7660 TE596R TE596R RE846 TR625 Front track rod - TR625
(BJ805) no thread (SX3251) female end TE596R - 76mm 14x1.5 RHT BLD 14mm
idler pivot TR625 TR625 - 660mm overall length
SILVERADO
Silverado RE6687 RE6687 - 305mm 22x1.5 (socket) 14x1.5 (tre)
305mm long
CHRYSLER (includes - Valiant) (see also Mitsubishi)

300C
11/05-on 300C RE6691 STB8835 RE6691 - 340mm 18x1.5 (socket) 15x1.5 (tre)
CORDOBA
1975-80 Cordoba, LeBaron (USA) BJ8
1958-62 LC1-L,MC1-L,PC1-L,RC1-L,SC1-L, BJ8 SX1103

RC2-M,SC2-M
CENTURA
1975-78 Centura KB, KC (Talbot 160) BJ119 TE474L TE474L TE474L - LHT M12x1
GALANT - see MITSUBISHI
JEEP - see JEEP
NEON
1996-9/02 Neon 104178 TE3173 TE3173 RE7004 Front RE7004 - 308mm F14x1.5 (socket) 14x1.5 (tre)
(BJ921) (RE3174) STB7057
Rear
STB7058
PT CRUISER

KING PIN LINK
SET
YEAR MODEL
7/01-on PT Cruiser BJ4648 TE4648 TE4648 RE7138 Front RE7138 - 310mm 14x1.5 (socket) 14x1.5 (tre)
STB7059
Rear
STB7071
VALIANT Typical Valiant type Front Suspension

1961-62 Valiant RV1 BJ18 BJ14 SX1116 Idler arm ball bearing kit - SX1103A
1962-2/66 Valiant SV1, AP5, AP6 BJ18 RH-BJ35 SX1116 TE173L TE173R TE173R TE173L SX2593 BJ35/36 - 1/2" mount holes
LH-BJ36 Male Male Male Male BJ80/81 - 9/16" mount holes
Idler arm ball bearing kit - SX1103A
2/66-11/67 Valiant AP6 (late), VC BJ18 RH-BJ35 SX1116 TE173L TE173R TE173R TE173L SX2427 BJ35/36 - 1/2" mount holes
no disc brake knuckle shield LH-BJ36 Male Male Male Male 32 splines BJ80/81 - 9/16" mount holes
inc. 4 master SX2427 - hole ID 27.84mm - 26.96mm
4/66-11/67 Valiant VC BJ18 RH-BJ80 SX1116 TE173L TE173R TE173R TE173L SX2427 BJ80/81 - 9/16" mount holes
with disc brake knuckle shield LH-BJ81 Male Male Male Male 32 splines BJ35/36 - 1/2" mount holes
inc. 4 master SX2427 - hole ID 27.84mm - 26.96mm
12/67-12/68 Valiant VE - with disc brake knuckle shield BJ18 RH-BJ80 SX1116 TE173L TE173R TE173R TE173L SX808 BJ80/81 - 9/16" mount holes
Manual steer LH-BJ81 Male Male Male Male (18900) BJ35/36 - 1/2" mount holes
12/67-12/68 Valiant VE - with disc brake knuckle shield BJ18 RH-BJ80 SX1116 TE173L TE173R TE173R TE173L SX808B power steer
Power steer LH-BJ81 Male Male Male Male (18900B) Idler arm ball bearing kit - SX1103A
1968-9/77 Valiant VE,VF,VG,VH,VJ,CH,CJ,VK,CL BJ18 RH-BJ35 SX1116 TE173L TE173R TE173R TE173L SX808 Idler arm ball bearing kit - SX1103A
Manual steer LH-BJ36 (to 2/77) Male Male Male Male (18900)
1968-9/77 Valiant VE,VF,VG,VH,VJ,CH,CJ,VK,CL BJ18 RH-BJ35 SX1116 TE173L TE173R TE173R TE173L SX808B Idler arm ball bearing kit - SX1103A
Power steer LH-BJ36 (to 2/77) Male Male Male Male (18900B)
10/77-1981 Valiant CM - Manual Steer BJ18 RH-BJ35 SX1116CM TE173L TE173R TE173R TE173L SX808 manual steer
LH-BJ36 Male Male Male Male (18900)
10/77-1981 Valiant CM - Power Steer BJ18 RH-BJ35 SX1116CM TE173L TE173R TE173R TE173L SX808B power steer
LH-BJ36 Male Male Male Male (18900B)
VOYAGER

KING PIN LINK
SET
YEAR MODEL
3/97-12/01 Voyager - from USA 104178 TE4651 TE4651 RE7138 Front RE7138 - 310mm 14x1.5 (socket) 14x1.5 (tre)
4G 8G (BJ921) check prior to ordering STB7068
Rear
STB7069
1/02-4/04 Voyager TE4651 TE4651 RE6070 Front RE7138 - 310mm 14x1.5 (socket) 14x1.5 (tre)
8G check prior to ordering STB7068 RE867 - 330mm 14x1.5 (socket) 14x1.5 (tre) 50mm
Rear RE880 - 345mm 14x1.5 (socket) 14x1.5 (tre)
STB7069 RE6070 - 330mm 14x1.5 (socket) 14x1.5 (tre) 100mm
CITROEN
8/99-on Berlingo items 'Genuine Only' this model
7/1978-on CX 2000, 2200, 2400 Normal Track BJ8213
1993-on Xantia BJ8039 TE4180 TE4280 RE6394

(QSJ1184) (QR2401S) (QR2402S) (QR2119S)
1989-94 XM BJ8039 TE7565 TE7465 RE2460

(QSJ1184)
1994-on XM BJ4034 TE1741 TE1742 RE3812
1997-on Xsara - power steer BJ4038 TE8175 TE8175 RE3812 BJ4038 - power steer & turbo diesel
1997-on Xsara - manual steer BJ4039 TE8175 TE8175 RE3812 BJ4039 - manual steer
(QSJ1600)
COBRA REPLICA
1985-on Cobra 5.0 ltr Sports BJ154 BJ155 TE525R TE525R
as manufactured by "The Replica Motor Co." Western Australia
COMMER
1951 "S" series KX41 TE72R TE72L

KING PIN LINK
SET
YEAR MODEL
NLA
1952-55 "T" series KX41 TE72R TE72L

NLA
1956-65 "B" series KX41 TE72R TE72L

NLA
1962-81 1500 van 15cwt / 2500 van 25cwt KX199 TE125R TE125L TE125L TE125R RH-TE125L TE125R front King pin set .812" x 4.750"
Series I,II,IIA,III,IV,PA,PB LH-TE125R TE125L rear Upper inner control arm kit - SX1066A
ends only ends only
1957-63 Cob Series I, 11 8 cwt BJ30 KX185 Upper inner control arm kit - SX1024A
NLA NLA Lower inner control arm kit - SX1078A
1962-65 Cob Series III 8cwt BJ31 BJ32 TE125L TE125L TE125R TE125R
NLA NLA
1970-81 18cwt 2000 series KX199 TE125R TE125L TE125L TE125R RH-TE125L TE125R front King pin set .812" x 4.750"
LH-TE125R TE125L rear TE125L & R - for drag link = ends only
DAEWOO
1994-6/98 1.5i, Cielo BJ800 TE951 TE950 TE4634 TE4633 M16x1.5 Tie Rod Thread
3/95-6/97 Espero JF,JA BJ800 TE951 TE950 TE4634 TE4633 M16x1.5 Tie Rod Thread
4/03-12/04 Kalos T200 RE6656 RE6656 - 216mm 16x1.5 (socket) 12x1.5 (tre)
9/03-12/04 Lacetti J200 RE896L RE896L - 305mm 16x1.5 (socket) 14x1.5 (tre)
6/97-03 Lanos TA.TF TE951 TE950 TE4634 TE4633 M16x1.5 Tie Rod Thread
8/97-05 Leganza VA,VF BJ5809 TE9753 TE9753 RE9344 Front RE898 - 307mm 18x1.5 (socket) 14x1.5 (tre)
or RH-STB7083 M14x1.5 Tie Rod Thread
RE898 LH-STB7082
Rear
STB7084
MUSSO - see SSANYONG
6/97-11/03 Nubira BJ648 TE9753 TE9753 RE9343 Front RE9343 - 355mm

J100 J150 (BJ422) 14x1.5 14x1.5 (RE672) Universal BJ648 needs 2 bolts 12mm x 30mm
requires bolts STB4209 STB4209 - universal fit - trim to suit
2 x 12mmx30mm 260mm

KING PIN LINK
SET
YEAR MODEL
6/97-10/99
Front
STB7084 STB7084 - specific fit
Rear
11/99-12/03
Front
Rear
7/99-9/04 Matiz BJ6654 TE5237 TE5237 RE5237 TE5237 - Female 14x1.5

ML RE5237 - power & manual steer
11/00-12/04 Tacuma Wagon 4 cyl BJ4053 TE4052 TE4051 Front

Z11 STB4209
260mm
DAIHATSU
APPLAUSE
1989-92 Applause A101 - manual steer RH-BJ7102 TE723L TE723R RE966
LH-BJ7104 RHT 12x1.25 RHT 12x1.25
inc. Arm
1989-92 Applause A101 - power steer RH-BJ7102 TE723L TE723R RE967 RE967 - 270mm 12x1.25 (socket) 12x1.25 (tre)
LH-BJ7104 RHT 12x1.25 RHT 12x1.25
inc. Arm
4/92-on Applause B101 - manual steer RH-BJ7102 TE952 TE952 RE966

LH-BJ7104
inc. Arm
4/92-on Applause B101 - power steer RH-BJ7102 TE952 TE952 RE967 RE967 - 270mm 12x1.25 (socket) 12x1.25 (tre)
LH-BJ7104
inc. Arm
CENTRO
3/95-12/97 Centro
L500
CHARADE
1977-10/82 Charade G10 RH-BJ402R TE684 TE684 RE840
LH-BJ403L male end

KING PIN LINK
SET
YEAR MODEL
inc. Arm
1982-86 Charade G11 - ball joint & control arm BJ4208R TE685L TE685R RE841 TE685L & R = right hand thread 12x1.25 Female
inc. Arm RH Thread RH Thread male end BJ4208R+ARM - LH & RH Assembly spigot style
curved 90mm curved 90mm
12x1.25 F 12x1.25 F
1/87-89 Charade G100,G101,G102 - ball RH-BJ4210R TE723L TE723R RE870 TE723L & R = right hand thread
joint & control arm - manual steer LH-BJ4211L RHT 12x1.25 RHT 12x1.25 male end RE870 - 275mm 11x1.5 (socket) 12x1.25 (tre)
inc. Arm (RE7005)
1989-93 Charade G100,G101,G102 - ball RH-BJ4210R TE723L TE723R RE1001 TE723L & R = right hand thread
joint & control arm - power steer LH-BJ4211L RHT 12x1.25 RHT 12x1.25 or RE1001 - 255mm 12x1.25 (socket) 12x1.25 (tre)
inc. Arm RE7014 RE7014 - 265mm 11x1.5 (socket) 12x1.25 (tre)
check prior to ordering
5/93-7/00 Charade G200,G203 - manual steer RH-BJ7710 TE723L TE723R RE1002

LH-BJ7711 RHT 12x1.25 RHT 12x1.25 (RE968)
inc. Arm
5/93-7/00 Charade G200,G203 - power steer RH-BJ7710 TE723L TE723R RE1001 RE1001 - 255mm 12x1.25 (socket) 12x1.25 (tre)
LH-BJ7711 RHT 12x1.25 RHT 12x1.25 or RE7014 - 265mm 11x1.5 (socket) 12x1.25 (tre)
inc. Arm RE7014
check prior to ordering
CUORE
1999-on Cuore BJ7208 TE872 TE873 RE8721 TE872/873 - 12x1.25mm Female Thread
inc. Arm 'straight' - check before ordering Some Models use TE685R & L (curved type)
or or RE8721 - 218mm 11x1.5 (socket) 12x1.25 (tre)
TE685L TE685R
'curved' - check before ordering
MIRA
4/90-on Mira L102, L200, L300 2WD BJ7208 TE872 TE873 RE8721 TE872/873 - 12x1.25mm Female Thread
inc. Arm 'straight' - check before ordering Some Models use TE685R & L (curved type)
or or
TE685L TE685R
'curved' - check before ordering
MOVE
2/97-00 Move L601
PYZAR
2/1997-1/01 Pyzar RH-BJ7710 TE723L TE723R RE7014 RE7014 - 265mm 11x1.5 (socket) 12x1.25 (tre)

KING PIN LINK
SET
YEAR MODEL
G301 LH-BJ7711 RHT 12x1.25 RHT 12x1.25 5dr Wagon

inc. Arm
SIRION
1998-2/05 Sirion RH-BJ7710 TE723L TE723R RE1007 RE1007 - 265mm 14x1.5 (socket) 12x1.25 (tre)
M100, M101 LH-BJ7711 RHT 12x1.25 RHT 12x1.25

inc. Arm
TERIOS
2/97-12/05 Terios RE866 RE866 - 315mm 14x1.5 (socket) 14x1.5 (tre)
J100 (RE3270)
11/05-on Terios
J200, J202, J210, J212
DAIHATSU - Commercial
DELTA
1970-on Delta 1500,2000,DV20L KX704
1973-77 Delta SV17,SV18 KX273 King pin set 25 x 155mm
1973-77 Delta SV23,SV26,DV23,DV26,DV28 KX273 TE599L TE599R King pin set 25 x 155mm
1977-84 Delta V10,V20,V30,V40,V50,V110 (Series) KX274 TE600L TE600R King pin set 28 x 165mm
TE600R - 93mm 20x1.5 RHT BLD 16.45mm
9/84-on Delta V50,V70,V90 (Series) - manual steer TE600L TE600R TR2270 TR7320 manual steer
TE600R - 93mm 20x1.5 RHT BLD 16.45mm
9/84-on Delta V50,V70,V90 (Series) - power steer TE686L TE686R TR2270 TR7320 power steer
TE686R - 103mm 20x1.5 BLD 17.87mm
1985-8/92 Delta (Wide Van Wagon) KB26,YB2#,CB2# BJ173 BJ225 TE3675R TE3675R RE883 TR2270 RE883 - 192mm 14x1.5 (socket) 14x1.5 (tre)
manual BJ225 - 4 bolt mount BLD 16.7mm
TE3675R - 228mm c/e 14x1.5 Female BLD 13.05mm
1985-8/92 Delta (Wide Van Wagon) KB26,YB2#,CB2# BJ173 BJ225 TE3675R TE3675R RE878 TR2270 RE878 - 190mm 14x1.5 (socket) 14x1.5 (tre)
power BJ225 - 4 bolt mount BLD 16.7mm
F series inc. ROCKY

1977-84 F Series & Rocky F20,F25,F50,F60,F65 TE712L TE600R TE712L - 322mm 22x1.5 LHT BLD 16.45mm

KING PIN LINK
SET
YEAR MODEL
1984-87 F Series & Rocky F70,F75,F80,F85 TE712L TE600R TR647 TR647 - consists of TE712L & TE600R
TE712L - 322mm 22x1.5 LHT BLD 16.45mm
TE600R - 93mm 20x1.5 RHT BLD 16.45mm
1987-on F Series & Rocky F70,F73,F75,F77,F78 TE959 TE959
10/88-5/98 Feroza F300 BJ5680 BJ3680 SX7601 TE955 TE954 TE958 TE953 SX7605
I, II, III 4 bolt sml 4 bolt lg LH Thread RH Thread RH Thread LH Thread
HANDI-VAN
HIJET
1968-76 Hijet Van S37,L37,S38,S40 RH-BJ316 RH-BJ254R TE810L TE810R TE810R TE810L
(BJ253R) LH-BJ254L (TE687L) (TE687R) (TE687R) (TE687L)
LH-BJ311
(BJ253L)
1979-1/83 Hijet Van S10. S70 RH-BJ316 RH-BJ256R TE810L TE810R TE810R TE810L
(BJ253R) LH-BJ256L (TE687L) (TE687R) (TE687R) (TE687L)
LH-BJ311
(BJ253L)
1976-4/81 Hijet Van S38,S40,S60 RH-BJ316 RH-BJ312 TE810L TE810R TE810R TE810L
(BJ253R) (BJ255R) (TE687L) (TE687R) (TE687R) (TE687L)
LH-BJ311 LH-BJ313
(BJ253L) (BJ255L)
4/81-86 Hijet Van S65 RH-BJ316 RH-BJ312 TE688L TE688R TE688R TE688L
(BJ253R) (BJ255R)
LH-BJ311 LH-BJ313 Female LHT Female RHT Female RHT Female LHT
(BJ253L) (BJ255L) M14x1.5 M14x1.5 M14x1.5 M14x1.5
4/81-90 Hijet Van S70,S75,S80,S85 TE688L TE688R TE688R TE688L
Female LHT Female RHT Female RHT Female LHT

M14x1.5 M14x1.5 M14x1.5 M14x1.5
TERIOS
1998-on Terios 4WD J100G, J102G RE866 RE866 - 315mm 14x1.5 (socket) 14x1.5 (tre)

KING PIN LINK
SET
YEAR MODEL
(RE3270)
DAIMLER - see JAGUAR
DANA/SPICER AXLES
FRONT AXLE MODEL # IDENTIFICATION

The tag to identify the front non-drive steering axles is located
between the spring pads on the front side of the centre beam section.
I-50 (5,000lbs), I-60 (6,000 lbs), I-75 (7,500lbs) 300-218 310-183 310-184 King pin set with metal bushes
I-80 (8,000lbs) 1.359" x 7.970"
I-90 (9,000lbs) 310-215 310-216 Tie rod end - 9.18" stud centre to end
Tie rod ends for straight I-Beam axle only
I-108 (10,800lbs), I-120 (12,000lbs), I-132 (13,200lbs) 300-249 310-215 310-216 Twin keyway king pin set with
Tie rod ends for straight I-Beam axle only metal bushes - 1.61" x 9.660"
DATSUN - see NISSAN
DE SOTO
1941-52 Custom S8C,S10C,S11C, Deluxe S8S,S10S, KX22 TE49L TE49R TE49R TE49L Upper inner control arm - SX1012A - NLA
S11S (not 7 passenger sedan, limo &
S11S wagon)
1953-57 Diplomat S7U,SP25 series manual steer KX21 TE423L TE423L Upper inner control arm - SX1012A - NLA
(TE114L) (TE114L)
1948-50 SA108, SB108, SA226 3/4-1 ton KX23 TE49L TE49R TE49L & R King pin set - .795" x 5 3/8"
NLA ends only
1948-56 64, 64P4, 65P4, 86P6, 87P6, 88P6, 103, 103P6, KX76 TE72R TE72L TE72L & R
105P6, 106P6, 123, 124, 125, 126, 134, 2-6ton NLA ends only
1950-58 SB226, SC226, 226AS/BS/CS, 233AS, BS, 25-30 cwt KX90 TE49L TE49R TE49L & R King pin set - .8725" x 5 3/8"
SC108, 108AS, 108BS/CS/DS, 15 cwt NLA ends only
1953-58 359AS/BS, 671AS/BS, 865AS/BS, 871AS/BS, 2½-6 ton KX76 TE72R TE72L TE72L & R
203/205/223/225/264, 2-6 ton NLA ends only
DODGE

KING PIN LINK
SET
YEAR MODEL
CHARGER, CORONET
1955-78 Charger, Coronet BJ8 TE173R TE173R TE173L TE173L
CHALLENGER etc.
1962-69 Challenger, Charger, Magnum, Crestwood BJ8
Super Bee, Monaco, Polara etc.
1970-78 Challenger, Charger, Magnum, Crestwood BJ8 RH-BJ493 TE173R TE173R TE173L TE173L
Super Bee, Monaco, Polara etc. LH-BJ494 Male Male Male Male
DART
1960-62 Dart SD1, SD2 BJ8 TE173R TE173R TE173L TE173L
1963-72 Dart - all models BJ18 TE173R TE173R TE173L TE173L

(to 1969) (to 1969) (to 1969) (to 1969)
1973-79 Dart, Aspen, Swinger BJ8
DIPLOMAT, MONACO
1976-89 Diplomat, Monaco, St.Regis (not Royal) BJ8
PHOENIX
1963-65 Phoenix TD2, VD2 BJ8 RH-BJ493 TE173R TE173R TE173L TE173L BJ493 US Alternate 10220
LH-BJ494 check orientation before ordering check orientation before ordering BJ494 US Alternate 10221
1965-73 Phoenix AP2,DB6,DC6,DD6,DE6,DF6,DG6 BJ8 RH-BJ493 TE173L TE173R TE173R TE173L BJ493 US Alternate 10220
LH-BJ494 check orientation before ordering check orientation before ordering BJ494 US Alternate 10221
DODGE - Commercial
DODGE RAM
1994-on Dodge Ram 2500, 3500 4WD Pickup BJ490 BJ489 BJ489 - press in Body dia. 44.5mm
with Dana 44 axle (305-112) (10253)
1994-on Dodge Ram 2500, 3500 4WD Pickup BJ484

with Dana 60 axle (305-126)
DODGE TRUCK
1941-52 D19,D22,D24,D30,D31,D32,D34,D36,D39, TE49L TE49R TE49R TE49L
D40,D42,Way Farer D29,D33,D41
1953-57 Kingsway D43-1,D49-1,D49-2 (Australian TE423L TE423L

Models) Manual Steer Only (TE114L) (TE114L)
1957-58 Utility D49A-2 serial# 436 on (also 347-365 inc.) TE423L TE423L

KING PIN LINK
SET
YEAR MODEL
D49A-3 series# 98 on; series# 28 on (TE114L) (TE114L)
1957-77 C600,D600,L600,S600,C700,CT700,D700, BJ8 300-140 310-142 310-143 Twin keyway king pin set with
DC700,L700,C800,CT800,D800,C850,C900, LH Thread RH Thread metal bushes - 1.234" x 7.440"
VL900,VLT900,LNT900,LV900,C1000 with 7000lb axle
1962-73 AT4-114,129,229,329,353 1-3 ton BJ8 300-112 TE175L TE175R King pin set with metal bushes
male male 0.8605" x 5.440"
1962-73 AT4-460,475,500,560,575,660,675,690 BJ8 300-135 310-282 310-281 King pin set with metal bushes
4, 5, 6 ton with 5000lb axle LH Thread RH Thread 1.124" x 7.250"
1962-73 AT4-660H,660HD,675H,675HD,690H, BJ8 300-140 310-142 310-143 Twin keyway king pin set with
690HD,760,760D,775,775D, 6-7 ton LH Thread RH Thread metal bushes - 1.234" x 7.440"
with 7000lb axle
1973-77 D5N - 200 & 300 series KX840 TE175L TE175R Single keyway king pin set
2160, 2180, 2260, 2280 (ES428L) male 25mm x 138mm
& 3260, 3280, 3560, 3580 male
1973-77 D5N - 400 & 500 series 300-135 TE175L TE175R Twin keyway king pin set with
466, 468, 478, 566, 568, 576, 578 (ES428L) male metal bushes - 1.124" x 7.250"
56D, DF3-650 3-5 ton with 5000lb axle male
6/79-on Dodge 700 series 13,200kg KX244 Stepped King Pin
1966-77 Utility 106C series VE,VF,VJ,VH-E-20,VS,VK BJ18 RH-BJ35 SX1116 TE173L TE173R TE173R TE173L SX808 Idler arm ball bearing kit - SX1103A
LH-BJ36 Male Male Male Male m/steer Pitman - if converted to p/steer - SX808B
1966-68 Utility 106C VE-E-20 (with disc brakes & BJ18 RH-BJ80 SX1116 TE173L TE173R TE173R TE173L Idler arm ball bearing kit - SX1103A
combination of steering knuckle, adaptor LH-BJ81 Male Male Male Male
& shield)
EUNOS - see MAZDA
FIAT
FIAT
7/66 - 1/73 124 series I BJ1765 BJ1766 TE395L TE395L
2/73-2/76 124 series II BJ1765 BJ1766 TE395L TE395L TE1477 TE1477
1961-73 125 BJ72 BJ157 TE400R TE400R TE400L TE400L

KING PIN LINK
SET
YEAR MODEL
1963-67 1300, 1500 BJ72 BJ121 TE400R TE400R
1963-69 500D/E/F chassis # 575440-on; 600E, 770 TE395L TE395L TE399R TE399R TR398 TIE ROD END SELECTION
Inner & Outer Tie Rod End Selection: NOTE - there
1964-72 850 series TE395L TE395L TE397R TE396R TR398 is a threaded connecting tube for inner & outer tie
rod ends - if this is reversed the tie rod end threads
1966-76 124 sedan, Special Coupe, Spyder BJ121 BJ73 TE395L TE395L TE399R TE399R TR398 will appear to be incorrect. Please ensure the
connecting tubes are in the correct orientation
1966-76 Sports BJ121 BJ73 TE395L TE395L TE399R TE399R TR398 prior to selecting tie rod ends.
1973-75 128 TE532R TE532R
1970-76 130 TE400R TE400R
1976-81 131, Mirafiori, Supermirafiori BJ2018 TE3637R TE3637R

inc. Arm
1981-12/86 131 Superbrava BJ2018

inc. Arm
4/72-85 132, Argenta BJ72 BJ157 TE400R TE400R TE400L TE400L
3/02-11/06 Ducato RE6647 RE6647 - 331mm 16x1.5 (socket) 16x1.5 (tre)
4/83-90 Regata 100S (16L) - manual steer BJ440 TE1837 TE1837 RE2027 RE2027 - 275mm
inc. Arm
6/83-90 Regata 100S (16L) - power steer BJ440 TE1837 TE1837 RE4086 RE4086 - 215mm
inc. Arm
FORD
CAPRI
1969-73 Capri - 1.6lt 4cyl & 3.0lt V6 RH-BJ124 TE406R TE406R BJ124/125 - Control Arm & Ball Joint

KING PIN LINK
SET
YEAR MODEL
Deluxe GT, XL, 3000 GT LH-BJ125

2 door coupe one piece lower arm/ball joint inc. Arm
10/89-7/94 Capri SA,SB,SC,SE front wheel drive BJ330 TE3624R TE3624R RE892 TE3624R - 73mm 12x1.25 female BLD 12.55mm
with manual steer (BJ180) (TE885) (TE885) RE892 - 325mm 14x1.5 (socket) 12x1.25 (tre)
10/89-7/94 Capri SA,SB,SC,SE front wheel drive BJ330 TE3624R TE3624R RE894L TE3624R - 73mm 12x1.25 female BLD 12.55mm
with power steer (BJ180) (TE885) (TE885) (RE7006) RE894L - 324mm 17x1 (socket) 12x1.25 (tre)
CONSUL / CORSAIR
1963-70 Consul, Corasir BJ5216RK SX1084 TE171L TE171R TE171R TE171L BJ5216RK repair kit is used to rebuild ball
(repair kit) NLA joint assy's which are equipped with full ball
type ball studs. In cases where assy's are
equipped with ½ ball type ball studs rebuild
is no longer available.
1966-70 Consul BJ142 SX1266 TE403R TE403R TE405L TE404L Lower inner control arm kit - SX1048A - NLA
SX1266RK - idler repair kit
1971-73 Consul, Granada BJ144 BJ143 TE422R TE422R RE902 RE902 - 240mm 20x1.25 (socket) 14x2 (tre)
Female Female BJ143 - 2 bolt mount BLD15.03mm
1986-on Corsair - all models TRW rack BJ286 TE739 TE739 RE1018 RE1018 - 310mm 16x1.5 (socket) 14x1.5 (tre)
14x1.5 Female 14x1.5 Female (P191013) TE739 - 75mm 14x1.5 RHT Female
14mm thread
1986-on Corsair - all models Japanese rack BJ267 TE665 TE665 RE857 RE857 - 280mm 16x1.0 (socket) 12x1.25 (tre)
(BJ555) (TE2225) (TE2225) 12mm thread
12mm thread 12mm thread
CORTINA
1962-67 Cortina MKI 1200,1500 BJ5216RK SX1084 TE171L TE171R TE171R TE171L BJ5216RK repair kit is used to rebuild ball
CB,CE,GT,GT500 (not Lotus Cortina) (repair kit) NLA joint assy's which are equipped with full ball
type ball studs. In cases where assy's are
RH-BJ40 equipped with ½ ball type ball studs BJ40 or
LH-BJ41 BJ41 assy (according to side) must be used,
NLA after which BJ5216RK can be used for future
rebuilding.
RH-BJ5216R
LH-BJ5216L BJ40/41 - ball joint assy's with 3/8"(10mm)
inc. Arm diameter mounting attachment holes

KING PIN LINK
SET
YEAR MODEL
1967-71 Cortina MkII 1300,1500,1600 CD L series BJ142 SX1266 TE403R TE403R TE405L TE404L TE1509RK TE1509RK - repair kit only
one piece lower arm/ball joint SX1266RK - idler repair kit NLA Idler or Pitman Arm Bush Kit - SX1266RK
1971-77 Cortina TC,TD BJ144 BJ143 TE422R TE422R RE902 RE902 - 240mm 20x1.25 (socket) 14x2 (tre)
Female Female BJ143 - 2 bolt mount BLD 15.03mm
1977-82 Cortina TE,TF BJ123 BJ152 TE524R TE524R RE821 RE821 - 290mm F24x1.25 (socket) 14x2 (tre)
(RE903) RE6412 - 296mm F22x1.5 (socket) 14x2 (tre)
m/steer BJ152 - 2 bolt mount BLD 16.25mm
RE6412
p/steer
COUGAR
9/99-12/02 Cougar - SW, SX Front
STB7104
Rear
STB7105
ESCAPE
2001-02 Escape BJ306 TE4170 TE4170 RE4170 Front RE4170 - 351mm 16x1.5 (socket) 14x1.5 (tre)
(BJ4170) (RE2240) STB8820
2002-on Escape BJ306 TE4170 TE4170 RE4170 Front RE4170 - 351mm 16x1.5 (socket) 14x1.5 (tre)
or (RE2240) STB8820
RH-BJ3433R
LH-BJ3433L
inc. Arm
ESCORT
1954-63 Escort - English TE118L TE118R TE118R TE118L SX1086 - idler arm repair kit
(Anglia, Prefect, Squire, Popular)
9/68-3/75 Escort MKI - 1100,1300,1500,1600 RH-BJ124 TE406R TE406R RE710 BJ124/125 - Control Arm & Ball Joint
one piece lower arm/ball joint LH-BJ125 fine RE710 - 240mm F27/32"X20tpi (socket) 1/2"x20tpi (tre)
6/75-7/80 Escort MKII - 1600,1800,2000 RH-BJ124 TE422R TE422R RE904 BJ124/125 - Control Arm & Ball Joint
one piece lower arm/ball joint LH-BJ125 Female Female coarse RE904 - 240mm F20x1.25 (socket) 14x2 (tre)

KING PIN LINK
SET
YEAR MODEL
1980-92 Escort MKIII TE406R TE406R QR2134 QR2134 - suits 90-92 only - special buy-in
1993-on Escort MKIV & V TE2688 TE2687 QR2467 QR2467 - suits 93-95 only - special buy-in
FAIRLANE
1962-65 Fairlane Compact FB,FC,FD BJ34 or
BJ34+ARM
inc. Arm
1966-67 Fairlane ZA BJ34 BJ74 SX1117 TE414R TE414R TE390L TE390L XW3590A Spring saddle (rubber) - XR3388A (single)
Outer tie rod ends longer than inners or 250mm long 250mm long 135mm long 135mm long manual Upper inner control arm kit - SX1118A
BJ34+ARM RH Thread RH Thread (ES359L) (ES359L) steer only Shackle Kit (Rear Hanger) - SK6688
inc. Arm Camber Pin - F66 (12.5mm)
1966-67 Fairlane ZA BJ34 BJ74 SX1117 TE391R TE391R TE415L TE415L XW3590A Spring saddle (rubber) - XR3388A (single)
Outer tie rod ends shorter than inners or 120mm long 120mm long 275mm long 275mm long manual Upper inner control arm kit - SX1118A
BJ34+ARM Ball stud 7/16" dia. thread Ball stud 7/16" dia. thread steer only Shackle Kit (Rear Hanger) - SK6688
1968-69 Fairlane ZB,ZC BJ34 BJ75 SX1117 TE391R TE391R TE415L TE415L XW3590A Spring saddle (rubber) - XR3388A (single)
or 120mm long 120mm long 275mm long 275mm long manual Upper inner control arm kit - SX1118A
BJ34+ARM Ball stud 7/16" dia. thread Ball stud 7/16" dia. thread steer only Shackle Kit (Rear Hanger) - SK6688
1969-72 Fairlane ZC,ZD BJ34 BJ75 SX1117 TE420R TE420R TE421L TE421L XW3590A Spring saddle (rubber) - XR3388A (single)
or Ball stud 1/2" dia. thread Ball stud 1/2" dia. thread manual Upper inner control arm kit - SX1118A
BJ34+ARM steer only Shackle Kit (Rear Hanger) - SK6688
1972-79 Fairlane ZF,ZG,ZH & LTD - manual steer BJ94 BJ75 SX1119 TE420R TE420R TE421L TE421L SX809 Spring saddle (rubber) - XR3388A (single)
ball joint only Ball stud 1/2" dia. thread Ball stud 1/2" dia. thread (18901) Upper inner control arm kit - SX1118A
or SX1119 - rubber bushs' both ends
BJ75-ARM SX1119U - rubber/urethane combination
multi fit Shackle Kit (Rear Hanger) - SK6688
Camber Pin - F66 (12.5mm)
1972-79 Fairlane ZF,ZG,ZH & LTD - power steer BJ94 BJ75 SX1119 TE420R TE420R TE421L TE421L SX809B Spring saddle (rubber) - XR3388A (single)
ball joint only Ball stud 1/2" dia. thread Ball stud 1/2" dia. thread (18902) Upper inner control arm kit - SX1118A
multi fit Shackle Kit (Rear Hanger) - SK6688
Camber Pin - F66 (12.5mm)
1979-2/88 Fairlane ZJ,ZK,ZL,LTD - manual steer BJ94 BJ75 SX1119 TE548R TE548R TE549L TE549L SX809 Spring saddle (rubber) - XR3388A (single)
ball joint only (18901) Upper inner control arm kit - SX1146A

KING PIN LINK
SET
YEAR MODEL

multi fit Camber pin kit - F66 (12.5mm) up to 5/80
Camber pin kit - F67 (14mm) 5/80-on
Control Arm - Front Upper L/R - FFU1
Trailing Arm - Rear Upper (ZK-FE) - FRU1
Note - FRU1 will not suit XR6 or XR8
Trailing Arm - Rear Lower (ZK-FE) - FRL2
1979-2/88 Fairlane ZJ,ZK,ZL,LTD - power steer BJ94 BJ75 SX1119 TE548R TE548R TE549L TE549L SX809B Spring saddle (rubber) - XR3388A (single)
Camber pin kit - F67 (14mm) 5/80-on
Trailing Arm - Rear Upper (ZK-FE) - FRU1
Trailing Arm - Rear Lower (ZK-FE) - FRL2
1973-76 Landau - manual steer BJ94 BJ75 SX1119 TE548R TE548R TE549L TE549L SX809 Spring saddle (rubber) - XR3388A (single)
1973-76 Landau - power steer BJ94 BJ75 SX1119 TE548R TE548R TE549L TE549L SX809B Spring saddle (rubber) - XR3388A (single)
1988-8/89 Fairlane NA,LTD DA BJ317 BJ318 or TE817R TE817R RE817 RE817 - 353mm 14x1.5 (socket) 14x2 (tre)
(BJ296) BJ318OS (TE731) (TE731) (P191010) Spring saddle (rubber) - XR3388A (single)
(oversize) 14mm thread 14mm thread Control Arm - Front Lower R - FFL1
(BJ292) Control Arm - Front Lower L - FFL2
Trailing Arm - Rear Upper - FRU1
Trailing Arm - Rear Lower - FRL2
Stub Axle - Front Right Non ABS - FS1

KING PIN LINK
SET
YEAR MODEL
Stub Axle - Front Left Non ABS- FS2

Stub Axle - Front Right With ABS - FS3
Stub Axle - Front Left With ABS- FS4
8/89-2/95 Fairlane NA,NB,NC,ND,LTD DA,DB,DC,DD BJ317 BJ318 or TE818R TE818R RE818 RE818 - 355mm 14x1.5 (socket) 16x1.5 (tre)
(BJ296) BJ318OS (TE732) (TE732) (P191017) Camber Shims - FS15 = 1.5mm, FS30 = 3.0mm
(oversize) 16mm thread 16mm thread Camber Shims - FS60 = 6mm
(BJ292) Control Arm - Front Lower R - FFL1
Control Arm - Front Lower L - FFL2
Trailing Arm - Rear Lower NA-NC - FRL2
Trailing Arm - Rear Lower NC-ND - FRL3
3/95-on Fairlane NF,NL, LTD DE, DF, DL BJ317 BJ318 or TE818R TE818R RE1041 RE1041 - 350mm 14x1.5 (socket) 16x1.5 (tre)
(BJ296) BJ318OS (TE732) (TE732) (P191041) Camber Shims - FS15 = 1.5mm, FS30 = 3.0mm
(oversize) 16mm thread 16mm thread 5mm shorter Camber Shims - FS60 = 6mm
(BJ292) than RE818 Trailing Arm - Rear Upper NF - FRU4 (350mm)
Trailing Arm - Rear Upper NL - FRU5 (330mm)
Stub Axle - Front Right NF/NL Non ABS - FS6
Stub Axle - Front Left NF/NL Non ABS - FS5
Stub Axle - Front Left NF With ABS - FS7
Stub Axle - Front Right NF With ABS - FS8
9/98-on Fairlane AU, BA BJ425 BJ426 TE3705 TE3705 RE1010 RE1010 - 362mm 16x1.5 (socket) 16x1.5 (tre)
(BJ396) (BJ395) (TE3289) (TE3289) (RE651) Rear IRS Toe Adjuster - TE5503
(BJ397) (BJ398)
or
RH - BJ426R+ARM
LH - BJ426L+ARM
FALCON
1960-61 Falcon XK - to Chassis # 4R1-62-66654 & BJ10 BJ11 TE163L TE163L TE163R TE163R TR304 TR304
4B1-62-34 Male Male Male Male
LH Thread LH Thread RH Thread RH Thread

KING PIN LINK
SET
YEAR MODEL
1961-63 Falcon XK - from Chassis # 4R1-62-6655 BJ10 BJ39 TE163L TE163L TE163R TE163R TR304 TR304 BJ39ARM - 15¾" long
& 4B1-62-34, XL Male Male Male Male
1964-66 Falcon XM,XP BJ34 BJ39 TE184R TE184R TE184L TE184L TR304 TR304 BJ39ARM - 15¾" long
or 5/8" thread 5/8" thread Male Male Spring saddle (rubber) - XR3388A (single)
BJ34ARM imperial imperial
inc. Arm Male Male
1966-67 Falcon XR BJ34 BJ74 SX1117 TE414R TE414R TE390L TE390L XW3590A Camber pin kit - F66 (12.5mm)
Outer tie rod ends longer than inners or (rubber) (ES359R) (ES359R) (ES363L) (ES363L) manual Spring saddle (rubber) - XR3388A (single)
BJ34+ARM 250mm long 250mm long 135mm long 135mm long Typical early Ford type Front Suspension steer only Upper inner control arm kit - SX1118A
inc. Arm RH Thread RH Thread Male Male Shackle Kit (Rear Hanger) - SK6688
Male Male
1966-67 Falcon XR BJ34 BJ74 SX1117 TE391R TE391R TE415L TE415L XW3590A Camber pin kit - F66 (12.5mm)
Outer tie rod ends shorter than inners or (rubber) 120mm long 120mm long 275mm long 275mm long manual Spring saddle (rubber) - XR3388A (single)
BJ34+ARM Ball stud 7/16" dia. thread Ball stud 7/16" dia. thread steer only Upper inner control arm kit - SX1118A
inc. Arm Male Male Male Male Shackle Kit (Rear Hanger) - SK6688
1968-69 Falcon XT,XW BJ34 BJ75 SX1117 TE391R TE391R TE415L TE415L Illustration intended as a guide only. XW3590A Camber pin kit - F66 (12.5mm)
or or (rubber) 120mm long 120mm long 275mm long 275mm long Use catalogue for correct part number reference. manual Spring saddle (rubber) - XR3388A (single)
BJ34+ARM BJ75-ARM Ball stud 7/16" dia. thread Ball stud 7/16" dia. thread steer only Upper inner control arm kit - SX1118A
inc. Arm multi fit Male Male Male Male Shackle Kit (Rear Hanger) - SK6688
1969-72 Falcon XW,XY BJ34 BJ75 SX1117 TE420R TE420R TE421L TE421L XW3590A Camber pin kit - F66 (12.5mm)
or or (rubber) Ball stud 1/2" dia. thread Ball stud 1/2" dia. thread manual Spring saddle (rubber) - XR3388A (single)
BJ34+ARM BJ75-ARM Male Male Male Male steer only Upper inner control arm kit - SX1118A
inc. Arm multi fit Shackle Kit (Rear Hanger) - SK6688
1969-72 Falcon XW,XY - Factory 4x4 only TE189R TE190L TE189R TE190L
1972-79 Falcon XA,XB,XC - manual steer BJ94 BJ75 SX1119 TE420R TE420R TE421L TE421L SX809 Camber pin kit - F66 (12.5mm)
or Ball stud 1/2" dia. thread Ball stud 1/2" dia. thread (18901) Spring saddle (rubber) - XR3388A (single)
BJ75-ARM Male Male Male Male Upper inner control arm kit - SX1118A (not XC)
multi fit SX1119 - rubber bushs' both ends
SX1119U - rubber/urethane combination
Shackle Kit (Rear Hanger) - SK6688

KING PIN LINK
SET
YEAR MODEL
1972-79 Falcon XA,XB,XC - power steer BJ94 BJ75 SX1119 TE420R TE420R TE421L TE421L SX809B Camber pin kit - F66 (12.5mm)
or Ball stud 1/2" dia. thread Ball stud 1/2" dia. thread (18902) Spring saddle (rubber) - XR3388A (single)
BJ75-ARM Male Male Male Male Upper inner control arm kit - SX1118A (not XC)
multi fit SX1119 - rubber bushs' both ends
1979-88 Falcon XD,XE,XF - manual steer BJ94 BJ75 SX1119 TE548R TE548R TE549L TE549L TR3304 SX809 Front BJ75ARM - 18¼" long with 2 strut holes **
ball joint only NLA (18901) STB8827 Camber pin kit - F66 (12.5mm) up to 5/80
or Camber pin kit - F67 (14mm) 5/80-on
BJ75-ARM Spring saddle (rubber) - XR3388A (single)
multi fit Tie rod end sleeve - XD3310A
Upper inner control arm kit - SX1146A
SX1119 - rubber bushs' both ends
Trailing Arm - Rear Upper (XE-XF) - FRU1
Trailing Arm - Rear Lower (XE-XF) - FRL2
1979-88 Falcon XD,XE,XF - power steer BJ94 BJ75 SX1119 TE548R TE548R TE549L TE549L TR3304 SX809B Front BJ75ARM - 18¼" long with 2 strut holes **
ball joint only NLA (18902) STB8827 Camber pin kit - F66 (12.5mm) up to 5/80
or Camber pin kit - F67 (14mm) 5/80-on
BJ75-ARM Spring saddle (rubber) - XR3388A (single)
multi fit Tie rod end sleeve - XD3310A
Upper inner control arm kit - SX1146A
Trailing Arm - Rear Upper (XE-XF) - FRU1

KING PIN LINK
SET
YEAR MODEL

Trailing Arm - Rear Lower (XE-XF) - FRL2
2/88-8/89 Falcon EA BJ317 BJ318 or TE817R TE817R RE817 Front RE817 - 353mm 14x1.5 (socket) 14x2 (tre)
(BJ296) BJ318OS (TE731) (TE731) (P191010) STB8209 Spring saddle (rubber) - XR3388A (single)
(oversize) 14mm thread 14mm thread Control Arm - Front Lower R - FFL1
(BJ292) Control Arm - Front Lower L - FFL2
Control Arm EA early - Front Upper R - FFU3
Control Arm EA early - Front Upper L - FFU2
Control Arm EA late - Front Upper R - FFU4
Control Arm EA late - Front Upper L - FFU5

8/89-9/94 Falcon EA,EB,ED BJ317 BJ318 or TE818R TE818R RE818 Front RE818 - 355mm 14x1.5 (socket) 16x1.5 (tre)
(BJ296) BJ318OS (TE732) (TE732) (P191017) STB8210 Camber Shims - AFS15 = 1.5mm, AFS30 = 3.0mm
(oversize) 16mm thread 16mm thread Camber Shims - AFS60 = 6mm
(BJ292) SRS1 Control Arm - Front Lower R - FFL1
Power Steering Control Arm - Front Lower L - FFL2
Rack Pressure Control Arm - Front Upper R - FFU4
Switch Control Arm - Front Upper L - FFU5

Trailing Arm (EA-EB) - Rear Lower - FRL2
Trailing Arm (ED) - Rear Lower - FRL3
9/94-9/98 Falcon EF, EL BJ317 BJ318 or TE818R TE818R RE1041 Front RE1041 - 350mm 14x1.5 (socket) 16x1.5 (tre)
(BJ296) BJ318OS (TE732) (TE732) (P191041) LPK200 Camber Shims - AFS15 = 1.5mm, AFS30 = 3.0mm
(oversize) 16mm thread 16mm thread 5mm shorter Camber Shims - AFS60 = 6mm
(BJ292) than RE818 Trailing Arm - Rear Upper EF- FRU4 (350mm)
Trailing Arm - Rear Upper EL - FRU5 (330mm)

KING PIN LINK
SET
YEAR MODEL
SRS1 Control Arm - Front Lower R - FFL5

Power Steering Control Arm - Front Lower L - FFL6
Rack Pressure Control Arm - Front Upper R - FFU4
Switch Control Arm - Front Upper L - FFU5
Stub Axle - Front Right EF/EL Non ABS - FS6
Stub Axle - Front Left EF/EL Non ABS - FS5
Stub Axle - Front Right EF With ABS - FS7
Srub Axle - Front Left EF With ABS - FS8
9/98-3/00 Falcon AU 1 BJ425 BJ426 TE3705 TE3705 RE1010 Front RE1010 - 362mm 16x1.5 (socket) 16x1.5 (tre)
(BJ396) (BJ395) (TE3289) (TE3289) (RE651) LPK200 Camber Shims - ASB15 = 1.5mm, ASB30 = 3.0mm
or Camber Shims - ASB60 = 6.0mm
RH - BJ426R+ARM SRS1 Rear IRS Toe Adjuster - TE5503
LH - BJ426L+ARM Power Steering Trailing Arm - Rear Upper (solid axle) - FRU5
or Rack Pressure Trailing Arm - Rear Lower (solid axle) - FRL3
S1938R - lower inner rear bush Switch Control Arm - Front Lower R - BJ426R+ARM
S1937R - lower Inner front bush Control Arm - Front Lower L - BJ426L+ARM
S0398R - shock absorber bush Control Arm - Front Upper R - FFU6
Control Arm - Front Upper L - FFU7
4/00-10/02 Falcon AU2, AU3 BJ425 BJ426 TE3705 TE3705 RE1010 Front RE1010 - 362mm 16x1.5 (socket) 16x1.5 (tre)
(BJ396) (BJ395) (TE3289) (TE3289) (RE651) RH-STB8214 Camber Shims - ASB15 = 1.5mm, ASB30 = 3.0mm
front front LH-STB8213 Camber Shims - ASB60 = 6.0mm

or SRS1 Rear IRS Toe Adjuster - TE5503
RH - BJ426R+ARM Power Steering Trailing Arm - Rear Upper (solid axle) - FRU5
LH - BJ426L+ARM Rack Pressure Trailing Arm - Rear Lower (solid axle) - FRL3
or Switch Control Arm - Front Lower R - BJ426R+ARM
S1938R - lower inner rear bush Control Arm - Front Lower L - BJ426L+ARM
S1937R - lower Inner front bush Control Arm - Front Upper R - FFU6
S0398R - shock absorber bush Control Arm - Front Upper L - FFU7
10/02-08 Falcon BA, BF BJ425 BJ426 TE3705 TE3705 RE1010 Front RE1010 - 362mm 16x1.5 (socket) 16x1.5 (tre)
(BJ396) (BJ395) (TE3289) (TE3289) (RE651) RH-STB8214 RE6422 - 363mm 16x1.5 (socket) 16x1.5 (tre)
front front (TE3706) (TE3706) (RE1015) LH-STB8213 Camber Shims - ASB15 = 1.5mm, ASB30 = 3.0mm
or Camber Shims - ASB60 = 6.0mm
RH - BJ426R+ARM Rear Control Arm - Front Lower R - BJ426R+ARM
LH - BJ426L+ARM STB8826HDP Control Arm - Front Lower L - BJ426L+ARM
Two piece Control Arm - Front Upper R - FFU6

Top urethane Control Arm - Front Upper L - FFU7

KING PIN LINK
SET
YEAR MODEL
bush
CAS5639 - Rear
Upr & Lwr Front
ARM5639U -
Rear Upper Control
(Toe) Control Arm
Arm (boomerang)
Outer Swivel Bush
complete with
(Body OD
bushings
40.00mm) BA-BF
RTV Ute
RE6422
CAS5669 - Rear ARM5639L - 80mm long
Rear Lower Front socket
Lower Rear Control
Control Arm (Blade housing plus
Arm Outer Swivel
Arm / Toe Arm)
Bush (Body OD thread
complete with
46.95mm)
bushings
Control Arm Swivels

Rear Suspension - Rear Arms
see illustrations following
2008-on Falcon FG Series Rear of Front TE3706L TE3707R RE1010 Front RE1010 - 362mm 16x1.5 (socket) 16x1.5 (tre)
CAS5639 - Rear (Lower C/Arm) STB8834 Camber Shims - ASB15= .5mm, ASB30=3.0mm
Upr & Lwr Front RH-BJ3052R Camber Shims - ASB60=6.0mm
(Toe) Control Arm LH-BJ3053L
Outer Swivel Bush
(Body OD
40.00mm)
Front of Front Note - Upper Arm Different L & R - with Spigot Ball
CAS5669 - Rear (Caster Bar) Joint. Plus Upper Inner Void Fillers to stop lateral
Lower Rear Control RH-BJ3526R movemement also available.
Arm Outer Swivel LH-BJ3527L
Bush (Body OD
46.95mm)
Rear
Control Arm Swivels STB8826HD
Rear Suspension - Rear Arms
see illustrations following RE1010 - 362mm 16x1.5 (socket) 16x1.5 (tre)
AU - FG Pictures

KING PIN LINK
SET
YEAR MODEL
AU - FG Pictures - continued
Exchange Arm & Stub Axle Illustrations
FESTIVA
1990-10/94 Festiva WA BJ415 TE3624R TE3624R RE6445 NOTE - in some applications BJ415 can be
(BJ4310) (TE733) (TE733) (RE7009) too short. Check length. If too short use BJ416
inc. Arm 283mm (BJ416 is 10mm longer than BJ415)
335mm RE6445 - 285mm 17x1 (socket) 12x1.25 (tre)
10/94-2/97 Festiva WB BJ416 TE968 TE968 RE9789 RE9789 - 295mm 16x1.5 (socket) 12x1.25 (tre)
(BJ4300) (M16 rack) RE891 - 325mm 14x1.5 (socket) 12x1.25 (tre)
inc. Arm or
345mm RE891
(M14 rack)
1/97-4/01 Festiva WD BJ416 TE968 TE968 RE9789 RE9789 - 295mm 16x1.5 (socket) 12x1.25 (tre)

KING PIN LINK
SET
YEAR MODEL
(BJ4300) (M16 rack) RE891 - 325mm 14x1.5 (socket) 12x1.25 (tre)

inc. Arm or
345mm RE891
(M14 rack)
1/98-4/01 Festiva WF RH-BJ4305 TE3388 TE3388 RE9789 RE9789 - 295mm 16x1.5 (socket) 12x1.25 (tre)
LH-BJ4306 (M16 rack) RE7010 - 295mm 17x1 (socket) 12x1.25 (tre)
inc. Arm or
RE7010
(M17 rack)
FIESTA
2/04-2008 Fiesta 5 WF BJ2250 TE2250 TE2249 RE876 RE876 - 294mm 14x1.5 (socket) 14x1.5 (tre)
WP,WQ
8/08-on Fiesta RE6920 RE6920 - 314mm 14x1.5 (socket) 14x1.5 (tre)
FOCUS
6/02-1/05 Focus 1.8L, 2.0L BJ678 TE1674 TE1675 RE7746 Front RE7746 - 355mm 14x1.5 (socket) 14x2.0 (tre)
LR 75mm long 75mm long STB7101
difference is bend in arm
14x2.0 RH Thread
BLD 13.00mm
1/05-on Focus 2.0L BJ340 TE2005 TE2006 RE4071 RE4071 - 308mm 14x1.5 (socket) 16x1.5 (tre)
LS (BJ2006) 98mm long 98mm long
11/05-on Focus 2.5L BJ340 TE2005 TE2006 RE4071 RE4071 - 308mm 14x1.5 (socket) 16x1.5 (tre)
LS XR5 16mm spigot 98mm long 98mm long BJ340 = 16mm spigot (main demand)
or difference is bend in arm BJ418 = 18mm spigot
BJ418 16x1.5 RH Thread BJ418 - identified to suit for some applications
18mm spigot BLD 12.25mm
GALAXIE
1964-66 Galaxie GE (Single 8 par lower control arm) BJ439 BJ120
(10262) (10209)
1965-68 Galaxie, LTD (except Australian origin) BJ439 BJ120

(10262) (10209)
1967-73 Galaxie, LTD, All models BJ439 BJ120 18724 18729 18724 - suits 1968-79
(10262) (10209) p/steer
KA

KING PIN LINK
SET
YEAR MODEL
11/99-2/04 KA BJ854 TE4417 TE4417 RE7011 Front TE4417 - F 1/2x20 UNF

(BJ213) (TE538) (TE538) (RE4417) STB7101 BJ854 - 3 bolt mount 16.4mm OD
LASER
2/81-85 Laser KA,KB - manual steer BJ180 or TE562L TE562R RE842 RE842 - 305mm 14x1.5 (socket) 12x1.25 (tre)
male end
RH-ARM180R manual
(BJ180ARMRH)
LH-ARM180L
(BJ180ARMLH)
2/81-85 Laser KA,KB - power steer BJ180 or TE562L TE562R RE843 RE843 - 305mm 17x1 (socket) 12x1.25 (tre)
male end
RH-ARM180R power
(BJ180ARMRH)
LH-ARM180L
(BJ180ARMLH)
10/85-90 Laser KC,KE - manual steer BJ330 or TE3624R TE3624R RE892 TE3624R - 73mm 12x1.25 female BLD 12.55mm
(TE733) (TE733) RE892 - 325mm 14x1.5 (socket) 12x1.25 (tre)
Note - KE Wagons ran to '98 RH-BJ465R (TE925) (TE925)
KE Sedans stopped @ '90 LH-BJ466L
inc. Arm
10/85-90 Laser KC,KE - power steer BJ330 or TE3624R TE3624R RE7220 Front TE840 has larger taper than TE3624R
(TE733) (TE733) KC power STB7103 TE3624R - 73mm 12x1.25 female BLD 12.55mm
Note - KE Wagons ran to '98 RH-BJ465R (TE925) (TE925) RE894L RE894L - 324mm 17x1 (socket) 12x1.25 (tre)
KE Sedans stopped @ '90 LH-BJ466L (RE7013) NOTE - RE894L can be used in place of RE7220
inc. Arm KE power only diff. is that RE894L has breather & 7220 no breather
3/90-10/94 Laser KF,KH BJ340 TE840 TE840 RE914 TE840 has larger taper than TE3624R
(BJ2006) (TE969) (TE969) (RE1550) RE914 - 342mm 16x1.5 (socket) 12x1.25 (tre)
16mm spigot (1989-94) RE915R - 340mm 16x1 (socket) 12x1.25 (tre)
BLD 13.2mm BLD 13.2mm m/steer RE916L - 342mm 16x1 (socket) 12x1.25 (tre)
or RH-RE915R RE1005 - 355mm 16x1 (socket) 12x1.25 (tre)
BJ418 (RE1551R) Measure ball joint to determine correct size:
(BJ1572) LH-RE916L BJ340 - dia. of spigot 16mm with 13mm slot
18mm spigot (RE1551L) BJ418 - dia. of spigot 18mm with 14mm slot
(1989-94)
p/steer
RH-BJ469R RE1005
LH-BJ470L (RE1570)
inc. Arm (1994-on)

KING PIN LINK
SET
YEAR MODEL
7/94-6/96 Laser KJ series 1 model 124 BJ418 TE840 TE840 RE1005 Front NOTE - RE1006 was previously listed for Alfa
(BJ1572) (TE969) (TE969) (RE1570) RH-STB8049 application. Check if ordered by part number.
18mm spigot (RE981) LH-STB8051 RE1005 - 355mm 16x1 (socket) 12x1.25 (tre)
BLD 13.2mm BLD 13.2mm (RE1006) Rear
(RE980) STB8052
(BJ1572) (TE969) (TE969) (RE1570) RH-STB8049 application. Check if ordered by part number.
18mm spigot (RE981) LH-STB8051 RE1005 - 355mm 16x1 (socket) 12x1.25 (tre)
BLD 13.2mm BLD 13.2mm (RE1006) Rear
(RE980) STB8052
(BJ1572) (TE969) (TE969) (RE1570) STB8134 application. Check if ordered by part number.
18mm spigot (RE1006) Rear RE1005 - 355mm 16x1 (socket) 12x1.25 (tre)
BLD 13.2mm BLD 13.2mm STB8135
10/94-2/99 Laser KJ series 2, KL BJ418 possibly possibly RE1005 Front RE1005 - 355mm 16x1 (socket) 12x1.25 (tre)
(BJ1572) TE840 TE840 (RE1570) RH-STB8049 Note - tie rod ends to suit change. In some
(BJ345) (TE969) (TE969) LH-STB8051 cases TE840 have been found to suit. Please
18mm spigot BLD 13.2mm BLD 13.2mm Rear check thoroughly prior to ordering.
check before ordering STB8052
3/99-on Laser KN RE1005 Front NOTE - RE1006 was previously listed for Alfa
(RE1570) STB8134 application. Check if ordered by part number.
(RE1006) Rear RE1005 - 355mm 16x1 (socket) 12x1.25 (tre)
STB8135
4/01-9/02 Laser KQ RE7015 RE7015 - 330mm 16x1 (socket) 14x1.5 (tre)
LONGREACH - see FORD COMMERCIAL - UTILITY
MAVERICK 4WD - see FORD COMMERCIAL - MAVERICK
MAVERICK - USA passenger vehicle

1970-74 Maverick - U.S.A. passenger vehicle BJ34 BJ75 TE420R TE420R Upper inner control arm kit - SX1118A
4 bolt mount Ball stud 1/2" dia. thread
BJ94
3 bolt mount
1975 Maverick - U.S.A. passenger vehicle BJ34 Upper inner control arm kit - SX1118A
4 bolt mount
BJ94

KING PIN LINK
SET
YEAR MODEL
3 bolt mount
MARQUIS
1972-79 Marquis Utility Std 500 - manual steer BJ94 BJ75 SX1119 TE420R TE420R TE421L TE421L SX809 Spring saddle (rubber) - XR3388A (single)
Ball stud 1/2" dia. thread Ball stud 1/2" dia. thread (18901) Upper inner control arm kit - SX1118A
1972-79 Marquis Utility Std 500 - power steer BJ94 BJ75 SX1119 TE420R TE420R TE421L TE421L SX809B Spring saddle (rubber) - XR3388A (single)
Ball stud 1/2" dia. thread Ball stud 1/2" dia. thread (18092) Upper inner control arm kit - SX1118A
METEOR
2/81-85 Meteor GA,GB - manual steer BJ180 or TE562L TE562R RE842 RE842 - 305mm 14x1.5 (socket) 12x1.25 (tre)
male end
RH-ARM180R manual
(BJ180ARMRH)
LH-ARM180L
(BJ180ARMLH)
2/81-85 Meteor GA,GB - power steer BJ180 or TE562L TE562R RE843 RE843 - 305mm 17x1 (socket) 12x1.25 (tre)
male end
RH-ARM180R power
(BJ180ARMRH)
LH-ARM180L
(BJ180ARMLH)
10/85-90 Meteor GC - manual steer BJ330 TE3624R TE3624R RE892 RE892 - 325mm 14x1.5 (socket) 12x1.25 (tre)
(TE733) (TE733)
10/85-90 Meteor GC - power steer BJ330 TE3624R TE3624R RH-RE893R RE894L - 324mm 17x1 (socket) 12x1.25 (tre)
(TE733) (TE733) LH-RE894L RE893R - 325mm 17x1.0 (socket) 12x1.25 (tre)
MONDEO
93-6/95 Mondeo HA RH-BJ1125R RE953 Front NOTE: initial replacement of control arms
(BJ1125) (RE7016) STB7104 must be fitted as a matched pair (LH & RH)
LH-BJ1126L Rear Subsequent replacement can be completed
(BJ1126) STB7105 on an individual basis.

KING PIN LINK
SET
YEAR MODEL
7/95-on Mondeo 2.0L HB, HC BJ408 TE946 TE946 RE953 Front NOTE: initial replacement of control arms
(BJ331) or (TE3710) (TE3711) (RE7016) STB7104 must be fitted as a matched pair (LH & RH)
RH-BJ1125R (RE954) Rear Subsequent replacement can be completed
(BJ1125) STB7105 on an individual basis.
LH-BJ1126L
(BJ1126)
2/00-9/00 Mondeo HE Front

STB7104
Rear
STB7107
MUSTANG
1964-66 Mustang - 6 cylinder BJ34 BJ39 18704 TE163L TE163L TE163R TE163R
4 bolt mount m/steer Male Male Male Male
BJ94 LH Thread LH Thread RH Thread RH Thread
3 bolt mount
1964-66 Mustang - V8 manual steer BJ34 BJ39 TE184L TE184L

4 bolt mount
BJ94
3 bolt mount
1964-66 Mustang - V8 power steer BJ34 BJ39 TE184R TE184L

4 bolt mount 4.28"
BJ94 imperial
3 bolt mount
1967 Mustang - all models BJ34 BJ74 18686 TE391R TE391R ES364L ES364L Upper inner control arm kit - SX1118A
4 bolt mount 4 bolt mount p/steer 120mm long 120mm long
BJ94 BJ75 18687 Ball stud 7/16" dia. thread
3 bolt mount 3 bolt mount m/steer
1968-69 Mustang - all models except Boss BJ34 BJ74 18686 TE391R TE391R ES364L ES364L Upper inner control arm kit - SX1118A
4 bolt mount 4 bolt mount p/steer 120mm long 120mm long
BJ94 BJ75 18687 Ball stud 7/16" dia. thread
3 bolt mount 3 bolt mount m/steer
1969 Mustang Boss BJ34 BJ75 18686 TE420R TE420R ES387L ES387L Upper inner control arm kit - SX1118A
4 bolt mount p/steer Ball stud 1/2" dia. thread
BJ94 18687
3 bolt mount m/steer
1970-73 Mustang - all models BJ34 BJ75 18686 TE420R TE420R ES387L ES387L 18801 Upper inner control arm kit - SX1118A
4 bolt mount p/steer Ball stud 1/2" dia. thread (1970 only) (1970 only) p/steer

KING PIN LINK
SET
YEAR MODEL
BJ94 18687
3 bolt mount m/steer
1974-78 Mustang - all models BJ439 10282 310-429 310-429

(10262)
1979-81 Mustang, Mustang II BJ496 ES2128R ES2128R

(10327)
1982-89 Mustang, Mustang II BJ496 ES2150R ES2150R

(10327)
1990-93 Mustang, Mustang II BJ496 ES3091 ES3091

(10327)
1994-98 Mustang, Mustang II 104226 ES3184 ES3184
PROBE
6/94-on Probe ST BJ306 or TE3197 TE3197 RH-RE917R Front Rack Ends - RE917R will do either side
RH-BJ350R (TE970) (TE970) (RE982) STB8049 RE917R - 330mm 18x1.5 (socket) 14x1.5 (tre)
(BJ4152) BLD-12.95mm LH-RE918L Rear RE918L - 330mm 18x1.5 (socket) 14x1.5 (tre)
LH-BJ350L (RE983) STB8051
(BJ4153)
inc. Arm
TAURUS
3/96-4/99 Taurus BJ4217 TE3349 TE3349 RE917R Front Used to list RE3344 as the rack end for this app.
(10427) (ES3349) (ES3349) STB7115 RE3344 - check thoroughly prior to ordering
Rear Much confusion on this RE3344 Rack End
STB7113 RE917R - 330mm 18x1.5 (socket) 14x1.5 (tre)
TELSTAR
1982-87 Telstar AR,AS - manual steer BJ306 or TE809R TE809R RH-RE844R Front RE844R - 275mm 16x1 (socket) 14x1.5 (tre)
RH-BJ467R (TE678) (TE678) LH-RE844L STB8104 RE844L - 300mm 16x1 (socket) 14x1.5 (tre)
LH-BJ468L TE809R - 93mm 14x1.5 female BLD 13.65mm
inc. Arm
1982-87 Telstar AR,AS - power steer BJ306 or TE809R TE809R RH-RE895R Front RE895R - 280mm 16x1.5 (socket) 14x1.5 (tre)
RH-BJ467R (TE678) (TE678) LH-RE896L STB8104 RE896L - 305mm 16x1.5 (socket) 14x1.5 (tre)
LH-BJ468L TE809R - 93mm 14x1.5 female BLD 13.65mm
inc. Arm
1987-92 Telstar AT, AV - manual steer BJ306 or TE809R TE809R RE898 Front TE809R - 93mm 14x1.5 female BLD 13.65mm

KING PIN LINK
SET
YEAR MODEL
RH-BJ467R (TE678) (TE678) STB8104 RE898 - 307mm 18x1.5 (socket) 14x1.5 (tre)
LH-BJ468L
inc. Arm
1987-92 Telstar AT, AV - power steer BJ306 or TE809R TE809R RE898 Front TE809R - 93mm 14x1.5 female BLD 13.65mm
RH-BJ467R (TE678) (TE678) STB8104 RE898 - 307mm 18x1.5 (socket) 14x1.5 (tre)
LH-BJ468L
inc. Arm
1992-on Telstar AX - 2WS BJ306 or TE3197 TE3197 RH-RE917R Front BJ4152/4153 - Control Arm
Telstar AY - 2WS RH-BJ350R (TE970) (TE970) (RE982) RH-STB8049 RE917R - 330mm 18x1.5 (socket) 14x1.5 (tre)
(BJ4152) LH-RE918L LH-STB8051 RE918L - 330mm 18x1.5 (socket) 14x1.5 (tre)

LH-BJ350L (RE983) Rear
(BJ4153) STB8050
inc. Arm
1992-on Telstar AX - 4WS BJ306 or TE3197 TE3197 RH-RE984 Front BJ4152/4153 - Control Arm
Telstar AY - 4WS RH-BJ350R (TE970) (TE970) (RE7018) RH-STB8049 RE984 - 323mm 18x1.5 (socket) 14x1.5 (tre)
(BJ4152) LH-RE985 LH-STB8051 RE985 - 323mm 24x1.5 (socket) 14x1.5 (tre)

LH-BJ350L (RE7017) Rear
(BJ4153) STB8050
inc. Arm
TERRITORY
2004-April 09 Territory RWD & AWD - "Series 1" BJ425 BJ3395 TE3290 TE3290 RE6420 Front Note - Territory includes two front control arms.
(BJ396) front of front STB8821 BJ3395 - press in 45.3mm OD
RH-BJ3396R
LH-BJ3396L
rear of front
CAS5639 - Rear
Upr & Lwr Front
(Toe) Control Arm
Outer Swivel Bush
(Body OD
40.00mm)
CAS5669 - Rear
Lower Rear Control
Arm Outer Swivel
Bush (Body OD
46.95mm)
April 09-on Territory RWD & AWD - "Series 2" BJ425 BJ3395 TE3290 TE3290 RE6420 Front Note - Territory includes two front control arms.
(BJ396) front of front STB8821 BJ3395 - press in 45.3mm OD

KING PIN LINK
SET
YEAR MODEL
CAS5639 - Rear
Upr & Lwr Front
(Toe) Control Arm
Outer Swivel Bush
(Body OD
40.00mm)
CAS5669 - Rear
Lower Rear Control
Arm Outer Swivel
Bush (Body OD
46.95mm)
BA / BF / Territory Rear Suspension Control Arm Swivel Bush
FORD - Commercial
1937-41 01C,09C,022C,1NC,11C,1GC.... - 0.50ton 310-220 310-221 310-220
01D,02D,09D,1GD,1ND,11D,19D... - 0.75ton
01Y,02Y,09Y,1GY,11Y,19Y... - 1.00ton
1936-69 Fordson/Thames Trader, FC/NC, 500 series KX205

& K150,200,300
1961-70 C550,C600,6000lbs. Axle, B600,C600,C700, 300-140 310-142 310-143 King pin set 1.234 x 7.440"
C7000,F600,F700,F850,F950,N600,N850,
N950,N8000,T800,7000lbs. Axle
1970-73 K500 (K0910), K600 (K1010), K700 (K1110/1111) 300-140 King pin set 1.234" x 7.440"
K750 (K1210/1211) 75--lb axle 5-7.5ton
CARGO
COURIER - 2WD
1965-8/80 Courier 1000kg pickup,truck & utility BJ99 BJ100 SX1149 TE192L TE192L TE191R TE191R TR591 SX1149 - 2 bolt mounting
LH Thread LH Thread RH Thread RH Thread NLA

KING PIN LINK
SET
YEAR MODEL
1979-82 Courier 18, 20, 22 (SGC,SGHW) BJ99 BJ100 SX1149 TE192L TE192L TE191R TE191R TR591 SX1149 - 2 bolt mounting
LH Thread LH Thread RH Thread RH Thread NLA
9/80-85 Courier 20, 22 (SGCD,SGHW) BJ194 BJ195 SX1150 TE590L TE590L TE589R TE589R SX5255 SX1150 - 3 bolt mounting
4 bolt mount (TE3601L) (TE3601L) (TE3609R) (TE3609R) BJ195 - 105.7mm b/w bottom bolt holes - no thread
not threaded (TE1521) (TE1521)
1985-87 Courier 20, 22 2WD (SGCH,SGHW) BJ3956 BJ3954 SX4200 TE590L TE590L TE589R TE589R SX5200 SX5200 - 38 splines & 1 master - top spline diam. 24.7mm
PC (BJ2003) (BJ2004) (SX1302) (TE3601L) (TE3601L) (TE3609R) (TE3609R) Check Pitman Arm Diameter & Spline Count b4 ordering
(TE1521) (TE1521) BJ3954 - 65.95mm b/w bottom threaded bolt holes
3 bolt mount 4 bolt mount

threaded threaded
1987-07 Courier 20,22 2WD (SCGE,SGHW) BJ3956 BJ3954 SX4201 TE590L TE590L TE3613R TE3613R SX5202 SX5202 - 38 splines & 1 master - top spline diam. 24.7mm
PC, PD, PE, PG, PH (BJ2003) (BJ2004) (SX1303) (TE3601L) (TE3601L) Check Pitman Arm Diameter & Spline Count b4 ordering
(TE1521) (TE1521) BJ3954 - 65.95mm b/w bottom threaded bolt holes

threaded threaded
COURIER - 4WD
1987-on Courier 26 4WD (SGHC) BJ3956 BJ3955 SX4201 TE3667L TE3667L TE3613R TE3613R SX5202 SX5202 - 38 splines & 1 master - top spline diam. 24.7mm
(BJ2003) (BJ2005) (SX5303) Check Pitman Arm Diameter & Spline Count b4 ordering
LH Thread LH Thread BJ3955 - 94mm b/w bottom bolt holes - no thread

3 bolt mount 4 bolt mount spline ID 24.7mm TE3667L - 85mm 14x1.5 Female BLD 13.95mm
11/89-98 Courier 4WD (UF66M) B2500, B2600 BJ3956 BJ3955 SX4201 TE3667L TE3667L TE3613R TE3613R TR2263 SX5203 SX5203 - 42 splines & 1 master - top spline diam. 26.5mm
PC (BJ2003) (BJ2005) (SX1303) (5/96-1/99) (SX1531) Check Pitman Arm Diameter & Spline Count b4 ordering
13.25mm BLD LH Thread LH Thread spline ID 26.5mm BJ3955 - 94mm b/w bottom bolt holes - no thread
3 bolt mount 4 bolt mount TE3667L - 85mm 14x1.5 Female BLD 13.95mm
NOTE - SX4201 = 13.25mm BLD threaded not threaded
98-1/05 Courier 4WD (UH71, PE-PH) B2600 BJ3956 BJ3955 SX1620 TE3667L TE3667L TE3613R TE3613R TR2261 SX2620 BJ3955 - 94mm b/w bottom bolt holes - no thread
PC, PD, PE, PG, PH (BJ2003) (BJ2005) 14.4mm BLD (2/99-1/05) TE3667L - 85mm 14x1.5 Female BLD 13.95mm
(BJ807) (BJ809) LH Thread LH Thread bend to avoid drag link TR2262 spline ID 30.8mm SX2620 - spline 30.8mm ID BLD 14.3mm
(2/99-02) BLD - 14.3mm NOTE - there are Japanese & Thai built Couriers in the Aust. & NZ
3 bolt mount 4 bolt mount or markets - please ascertain the dmiensions of the components
threaded not threaded SX2621 to ensure you are ordering exactly what is required.
NOTE - SX1620 = 14.4mm BLD (BLD 18.0mm) BLD - 15.5mm

KING PIN LINK
SET
YEAR MODEL
D SERIES
1975-82 D series - up to 5,500lb f/axle 300-155 King pin set 1.2305" x 7.860"
1967-78 D1000, 9500 & 10640lb axles 300-159 TE419L TE419R King pin set 1.433" x 8.500"
(KX238) (ES187L) (ES187R)
1978-81 D1414, 3400, 4830, 7120kg axles - power steer 300-159 TE419L TE419R RH-TE419R King pin set 1.433" x 8.500"
(KX238) (ES187L) (ES187R) LH-TE419L
1971-75 D400(0710/0810) D500(0910.0913) 300-140 King pin set 1.234" x 7.440"

D600(1010/1011/1015) - 7500lb axle 4-6ton
1969-75 D750 series D1210/1211/1213 D850 300-159 TE419L TE419R RH-TE419R King pin set 1.433" x 8.500"
D1211 D850T D1314 - power steer (KX238) (ES187L) (ES187R) LH-TE419L
(except D850 from '73)
1969-75 R series bus KX208 TE419L TE419R King pin set 1.376" x 8.21/32"
(ES187L) (ES187R)
1971-75 D750 series D1210/1211/1213 D800,D850 300-159 TE419L TE419R TE419R King pin set 1.433" x 8.500"
D1211, D850T, D1314 - manual steer (KX238) (ES187L) (ES187R) RH-front
ECONOVAN inc. SPECTRON 2WD

1977-81 Econovan 1.6 (SGMB) - 750 & 1000kg BJ198 BJ199 SX1300 TE592L TE592L TE593R TE593R SX5300
14mm female threads 14mm female threads
Please ensure tie rod
threads are checked
5/81-1/84 Econovan, Spectron 1.6 (SGMB) BJ198 BJ199 SX1300 TE974 TE974 TE973 TE973 prior to ordering.
SA24,SA25,SA32 12mm female threads 12mm female threads
5/1983-90 Econovan, Spectron 1.4, 1.8, 2.0, BJ250 BJ251 TE679 TE679 RE854 BJ250 - 3 bolt mount BLD 17.85mm
2.2 2WD (SGM) male end BJ251 - 3 bolt mount BLD 19.76mm
1986-90 Econovan, Spectron 2.0, 2.2 4WD (SGM) BJ250 BJ251 TE3615 TE3615 RE854 BJ250 - 3 bolt mount BLD 17.85mm
male end BJ251 - 3 bolt mount BLD 19.76mm

KING PIN LINK
SET
YEAR MODEL
1990-03 Econovan BJ250 BJ251 TE679 TE679 RE854 RE854 - 200mm 17x1.0 (socket) 14x1.5 (tre)
1/00-4/06 Econovan 2 & 4WD RE898 RE898 - 307mm 18x1.5 (socket) 14x1.5 (tre)
SPECTRON 4WD
1983-84 Spectron 1.6 4WD BJ198 BJ199 TE679 TE679
5/84-88 Spectron 1.8, 2.0 4WD BJ250 BJ251 TE679 TE679 RE854 BJ250 - 3 bolt mount BLD 17.85mm
male end BJ251 - 3 bolt mount BLD 19.76mm
EXPLORER 4WD
1995-2001 Explorer 4WD - UN, UP, UQ, US LH - BJ8708 104222 TE3302 TE3302 RE7007 Front RE7007 - 277mm 16x1.5 (socket) 14x1.5 (tre)
RH - BJ8710 or STB2751 RE7008 - 300mm 16x1.5 (socket) 14x1.5 (tre)
RE7008 BJ8708 - complete arm - fixed
check prior to ordering BJ8710 - complete arm - adjustable
length difference
2001-2008 Explorer 4WD - UT, UX, UZ BJ8008 Front BJ8008 - press in ball joint - OD 42.95mm
BLD 13.3mm STB2751
F Series Illustrations
F100 Steering Parts Orientation - Australian Vehicles Typical I-Beam Axle type Front Suspension
For the correct selection of Inner and

Outer Tie Rod Ends to suit American F
series vehicles please refer to the
illustration left. Where possible the
thread size and direction have been
included to further assist in correct
selection.
F100/F150 2WD
1948-52 F100/F150 2WD K365N 310-220 310-220 King pin set with metal bushes
0.812" x 5.98"

KING PIN LINK
SET
YEAR MODEL
1953-56 F100/F150 2WD 300-122 310-221 310-220 King pin set with metal bushes
RH Thread LH Thread 0.859" x 5.86"
3.12" stud centre to end
1957-64 F100/F150 2WD 300-131 310-221 310-220 King pin set with metal bushes
RH Thread LH Thread 0.859" x 6.55" - off centre keyway
1965 F100/F150 2WD 300-183 310-179 King pin set with nylon bushes
nylon bush replacement king pin set (ES362R) 0.859" x 6.36"
1965 F100/F150 2WD 300-185 310-179 King pin set with metal bushes
metal bush replacement king pin set (ES362R) 0.859" x 6.36" - centre keyway
1966-71 F100/F150 2WD 300-184 310-179 King pin set with nylon bushes
1966-71 F100/F150 2WD 300-202 310-179 King pin set with metal bushes
metal bush replacement king pin set (ES362R) 0.859" x 6.36"
1971-74 F100/F150 2WD 300-184 310-217 King pin set with nylon bushes
1971-72 F100/F150 2WD 300-202 310-217 King pin set with metal bushes
metal bush replacement king pin set (ES413R) 0.859" x 6.36" - off centre keyway
1973-74 F100/F150 2WD 300-199 346-137 310-217 DS181TP King pin set with metal bushes
metal bush replacement king pin set (DS794) (ES413R) adjustable 0.859" x 6.36"
438mm long
1975-79 F100/F150 2WD 300-197 346-137 310-217 DS181TP King pin set with metal bushes
metal bush replacement king pin set (DS794) (ES413R) adjustable 0.859" x 6.48"
438mm long
1975-79 F100/F150 2WD 300-237 346-137 310-217 DS181TP King pin set with nylon bushes
nylon bush replacement king pin set (also 300-197) (DS794) (ES413R) adjustable 0.859" x 6.48"
438mm long
1980-8/81 F100/F150 2WD - fitted with king pin front 300-228 310-299 310-300 see Drag Link DS1017 DS1018P King pin set with metal bushes
suspension & manual brakes (ES2077R) (ES2078L) 20mm thread (1981-92) 1.054" x 6.96"
(TE2212R) (ES2213L) 430mm long single end
22mm RH Thread 20mm LH Thread 880mm long

KING PIN LINK
SET
YEAR MODEL
1980-8/81 F100/F150 2WD - fitted with king pin front 300-198 310-299 310-300 see Drag Link DS1017 DS1018P King pin set with metal bushes
suspension & power brakes (ES2077R) (ES2078L) 20mm thread (1981-92) 0.859" x 6.48"
8/81-1985 F100/F150 2WD fitted with ball joint susp BJ8412 BJ489 310-299 310-300 see Drag Link DS1017 DS1018P Lower ball joint - 3/4" thread
(305-150) (10253) (ES2077R) (ES2078L) 20mm thread single end
(10379) (K8195) (TE2212R) (ES2213L) 430mm long 880mm long
41.6mm diam 44.6mm diam 22mm RH Thread 20mm LH Thread
8/81-1985 F100/F150 2WD fitted with ball joint susp BJ8412 10380 310-299 310-300 see Drag Link DS1017 DS1018P Lower ball joint - 5/8" thread
GVW 4700lbs with power brakes (305-150) (305-151) (ES2077R) (ES2078L) 20mm thread single end
(10379) 5/8"-18 threads (TE2212R) (ES2213L) 430mm long 880mm long
41.6mm diam 22mm RH Thread 20mm LH Thread
1986 F100/F150 2WD BJ8412 BJ489 310-299 310-300 see Drag Link DS1017 DS1018P
(305-150) (10253) (310-355) (310-354) 20mm thread single end
(10379) (K8195) 22mm thread 20mm thread 430mm long 880mm long
41.6mm diam 44.6mm diam RH Thread LH Thread
1987-96 F100/F150 2WD 104132 104133 310-299 310-300 see Drag Link DS1017 DS1018P
(K8432) (K8431) (310-355) (310-354) 20mm thread (1981-92)
22mm thread 20mm thread 430mm long single end
RH Thread LH Thread 880mm long
1997-on F100/F150 2WD 104222 Front

STB8772
F250 2WD
1953-56 F250 2WD 300-122 310-221 310-220 King pin set with metal bushes
1957-64 F250 2WD 300-131 310-221 310-220 King pin set with metal bushes
1965 F250 2WD 300-183 310-179 King pin set with nylon bushes
1965 F250 2WD 300-185 310-179 King pin set with metal bushes
1966-71 F250 2WD 300-184 310-179 King pin set with nylon bushes

KING PIN LINK
SET
YEAR MODEL
1966-71 F250 2WD 300-202 310-179 King pin set with metal bushes
1971-74 F250 2WD with single piston disc brakes 300-199 346-147 310-217 DS181TP King pin set with metal bushes
(DS806) (ES413R) adjustable 0.859" x 6.36"
17.30" 5.00"
1975-79 F250 2WD with single piston disc brakes 300-197 346-147 310-217 DS181TP King pin set with metal bushes
(DS806) (ES413R) adjustable 0.859" x 6.48"
1971-74 F250 2WD - with dual piston disc brakes 300-184 346-137 310-218 DS181TP King pin set with nylon bushes
6100/6900lb GVW serial# M00,001 to W40,001 (DS794) (ES414R) adjustable 0.859" x 6.36"
nylon bush replacement king pin set 17.25" 4.05"
1971-74 F250 2WD - with dual piston disc brakes 300-202 346-137 310-218 DS181TP King pin set with metal bushes
6100/6900lb GVW serial# M00,001 to W40,001 (DS794) (ES414R) adjustable 0.859" x 6.36"
metal bush replacement king pin set 17.25" 4.05"
1973-79 F250 2WD - with dual piston disc brakes 300-237 346-137 310-218 DS181TP King pin set with nylon bushes
6200/9600lb GVW from serial# W40,001 (DS794) (ES414R) adjustable 0.859" x 6.48"
nylon bush replacement king pin set 17.25" 4.05"
6200/9600lb GVW from serial# W40,001 (DS794) (ES414R) adjustable 0.859" x 6.48"
with 6900 & 460 ci, 7500/8100lb GVW (DS794) (ES414R) adjustable 1.054" X 6.45"
1980-85 F250 2WD 300-228 310-299 310-300 see Drag Link DS1017 DS1018P King pin set with metal bushes
(ES2077R) (ES2078L) 20mm thread (1981-92) 1.053" X 6.96"
1986 F250 2WD 300-228 310-299 310-300 see Drag Link DS1017 DS1018P King pin set with metal bushes
(310-355) (310-354) 20mm thread (1981-92) 1.054" X 6.96"
1987-97 F250 2WD - exc Ambulance & Crew 104132 104138 310-299 310-300 see Drag Link DS1017 DS1018P
Cab - ball joint suspension (310-355) (310-354) 20mm thread (1981-92)

KING PIN LINK
SET
YEAR MODEL
1999-07 F250 2WD 104132 104138 ES417 ES418 see Drag Link DS1439 IC323304A
F350 2WD
1957-66 F350 2WD 300-129 310-113 310-112 King pin set .9215" x 7.00"
RH Thread LH Thread
1967-71 F350 2WD - up to serial# M00,001 300-201 DS041TP King pin set with metal bushes
(262-1502) adjustable 1.054" X 6.45"
1971-79 F350 2WD - from serial# M00,001 300-201 310-218 DS041TP King pin set with metal bushes
(262-1502) RH Thread adjustable 1.054" X 6.45"
1980-85 F350 2WD 300-228 310-299 310-300 see Drag Link DS1017 DS1018P King pin set with metal bushes
(ES2077R) (ES2078L) 20mm thread (1981-92) 1.054" X 6.96"
1986 F350 2WD exc. Crew Cab 300-228 310-299 310-300 see Drag Link DS1017 DS1018P King pin set with metal bushes
(310-355) (310-354) 20mm thread (1981-92) 1.054" X 6.96"
1986 F350 2WD Crew Cab 300-228 310-410 310-300 see Drag Link DS1017 DS1018P King pin set with metal bushes
1" thread (310-354) 20mm thread (1981-92) 1.054" X 6.96"
5.51" 20mm thread 430mm long single end
LH Thread 880mm long
1987-96 F350 2WD 104132 104138 310-299 310-300 see Drag Link DS1017 DS1018P
(310-355) (310-354) 20mm thread (1981-92)
1999-08 F350 2WD 104132 104138

Twin Eye Beam
F100 & F150 4WD inc. BRONCO

1959-65 F100 4WD with manual steer 310-113 310-112
RH Thread LH Thread

KING PIN LINK
SET
YEAR MODEL
1966-75 F100 4WD with ball joint suspension BJ490 BJ489

with manual steer (K8194) (10253)
(10252) (K8195)
(305-112) 44.6mm diam
1973-75 F100 4WD with power steer BJ490 BJ489 310-236 DS69TP DS69TP - replaces original double ended
(K8194) (10253) 4.80" adjustable fixed drag link
(10252) (K8195)
(305-112) 44.6mm diam
1976-77 F100 4WD BJ490 BJ489 310-273 DS69TP DS69TP - replaces original double ended
(10252) (K8195)
(305-112) 44.6mm diam
1978-79 F100 4WD BJ490 BJ489 310-274 DS69TP DS69TP - replaces original double ended
(10252) (K8195)
(305-112) 44.6mm diam
1980-5/85 F100, BRONCO 4WD with ball joint BJ484 BJ489 310-299 310-300 see Drag Link DS1017 DS1018P
suspension (K8388) (10253) (ES2077R) (ES2078L) 20mm thread (1981-92)
(10339) (K8195) (TE2212R) (ES2213L) 430mm long single end
(305-126) 44.6mm diam 22mm RH Thread 20mm LH Thread 880mm long
5/85-1996 F100,F150,BRONCO 4WD BJ484 BJ490 310-299 310-300 see Drag Link DS1017 DS1018P
with ball joint suspension (K8388) (K8194) (310-355) (310-354) 20mm thread (1981-92)
(10339) (10252) 22mm thread 20mm thread 430mm long single end
(305-126) (305-112) RH Thread LH Thread 880mm long
1997-on F150 4WD 104222 ES3366 ES3367 ES3369 ES3370 Front Adjusting Sleeve - ES3368S
STB8772
F250 4WD
1959-66 F250 4WD 310-113 310-112
RH Thread LH Thread
1967-72 F250 4WD 310-192 310-191

RH Thread LH Thread

KING PIN LINK
SET
YEAR MODEL
1973-79 F250 4WD with ball joint suspension BJ490 BJ490** DS69TP ** some F250 had F350 axles & could have 10383 lowers
(K8194) (K8194) adjustable DS69TP - replaces original double ended

(10252) (10252) fixed drag link
(305-112) (305-112)
1980-96 F250 4WD with ball joint suspension BJ484 BJ490** ES2728L ES2727R ** some F250 had F350 axles & could have 10383 lowers
(K8388) (K8194) 22mm thread 22mm thread

(10339) (10252) (1/85-94) (1/85-94)
(305-126) (305-112)
1998-on F250 4WD 10339 104149 TE3423 TE3427 DL28001 - links 2 boxes Front
DL1438 - 24" long STB8662
DL1439 - longer than 24"
F350 4WD
1980-81 F350 4WD BJ484 BJ489 310-311 310-312
(K8388) (10253) (ES2126R) (ES2127L)
(10339) (K8195)
(305-126) 44.6mm diam
1981-85 F350 4WD - 3800 & 3850 axle except 4.10 ratio BJ484 BJ489 310-311 310-312
(K8388) (10253) (ES2126R) (ES2127L)
(10339) (K8195)
(305-126) 44.6mm diam
1981-85 F350 4WD - 4500, 4600 & 4800 with 4.10 ratio BJ484 10383 310-311 310-312
(K8388) (K8433) (ES2126R) (ES2127L)
(10339)
(305-126)
1992-97 F350 4WD - 5000 axle BJ484 104149

(K8388)
(10339)
(305-126)
F500, F600, F700, F750 TRUCK

1957-62 F500 & F5600 with 5000lb axle 300-134 310-113 310-112 King pin set with metal bushes
3.5" stud centre to end 1.1285" x 7.67"

KING PIN LINK
SET
YEAR MODEL
1956-69 F500,F600,F700,F750 with 6000lb axle 300-115 310-281 310-282 Single keyway king pin with metal bushes
1956-69 F500,F600,F700,F750 with 5000lb axle 300-155 310-281 310-282 King pin set with metal bushes
1967-79 F500,F600,F700,F750 with 6000 & 300-180 310-184 310-183 King pin set with metal bushes
7000 (to 1975) lb axle 4.43" stud centre to end & 2 oil rings - 1.2305" x 8.89"
1970-73 F500 with 13500,15000,1950lb axle 300-180 310-184 310-183 King pin set with metal bushes
4.43" stud centre to end & 2 oil rings - 1.2305" x 8.89"
1975-90 F600,F700,F750 with 7000, 8000 & 300-207 310-267 310-266 Twin keyway king pin set with
9000lb axle 6.07" stud centre to end metal bushes - 1.433" x 8.25"
1970-73 F600, F700,F750 with 21000,23000 & 300-180 310-184 310-183 King pin set with metal bushes
24500lb axle 4.43" stud centre to end & 2 oil rings - 1.2305" x 8.89"
LONGREACH - see UTILITY
LOUISVILLE TRUCK
1970-86 LNT900,LT900,LNT8000,LT8000,LNT9000 300-182 310-222 310-223 Twin keyway king pin set with
with 12000lb axle (check king pin length) metal bushes - 1.7935" x 9.12"
1976-85 L900,LN900,LNT900,LT900,LN8000 300-215 310-267 310-266 King pin set 1.607" x 9.08"
LNT8000,LT8000,LT9000 with 9000lb 6.07" stud centre to end
axle with Air Brakes W40001-on
1975-89 LNT900,LT900,LNT8000,LT8000,LNT9000, LT9000 300-217 310-222 310-223 Twin keyway king pin set with
with 10000,11000 & 12000lb axle metal bushes - 1.7935" x 10.070"
(check king pin length)
1980-90 LNT900,LT900,LNT8000,LT8000,LNT9000, LT9000 300-216 310-222 310-223 Twin keyway king pin set with
with 16000, 18000 & 20000 lb axle metal bushes - 1.999" x 11.210"
MAVERICK
3/88-10/91 Maverick GY6, KY6 TE984 TE979 DL700S SX5307 DL700S - Heavy Duty Adjustable
adjustable p/steer Track Rod - runs behind Front Diff - DL704
adjustable Track Rod - runs behind Front Diff - DL704
adjustable Track Rod - runs behind Front Diff - DL704

KING PIN LINK
SET
YEAR MODEL
RAIDER
8/91-10/96 Raider 26L (4WD) BJ3956 BJ3955 SX4201 TE3667L TE3667L possibly - check first SX5202 SX5302 - 24.7-25.7mm tapered spline with
UF (BJ2003) (BJ2005) (SX1304) TE3613R TE3613R (SX5303) 39 splines (38 splines & 1 master spline)
(BJ807) (BJ809) LH Thread LH Thread Some models also have alternate SX1531
bent to avoid drag link check prior to ordering 27-28mm tapered spline with 43 splines
TE3613R fit some - not all models see note Please check prior to ordering
Check prior to ordering. TE3667L - 85mm 14x1.5 Female BLD 13.95mm
RANGER
2006-on Ranger - PJ, PK (2WD)
2006-on Ranger - PJ, PK (4WD) BJ3956 BJ3455 SX1622 TE3667L TE3667L TE3613R TE3613R SX2620 SX1622 - same as SX1620 but with 12mm bolt holes
(BJ2003) (BLD 19.3mm) BLD - 14.3mm
LH Thread LH Thread bent to avoid drag link or

SX2621
BLD - 15.5mm
SPECTRON - see ECONOVAN
TERRITORY - see TERRITORY UNDER FORD HEADER
TRADER
1979-on Trader 0409, 0509, 0711, 0811 KX605 TE606L TE606R
1984-89 Trader 3500, 4100 KX605 TE606L TE606R
1979-98 Trader - check pin size KX605 King pin set 30mm x 175mm
TRANSIT
1965-71 Transit Van 12-35 cwt KX240 TE412L TE412R RH-TE413R (END) Grease nipples at side stub axles
mostly 4cyl 20mm thread 20mm thread LH-TE413L (END) King pin set 0.812" x 6.110"
18mm thread Oil ring grooves top & bottom
4/72-85 Transit Van 12-35 cwt KX257 TE412L TE412R RH-TE413R (END) Grease nipples at top & bottom axles
20mm thread 20mm thread LH-TE413L (END) King pin set 0.860" x 5.755"
18mm thread
9/85-7/91 Transit Van - VE BJ1300 RE2473 BJ1300 - BLD 21.8mm - 3 bolt mount
1991-99 Transit Van BJ1300 TE2705 TE2705 RE3037 BJ1300 - BLD 21.8mm
(BJ1313) (RE7019) BJ1300 - 3 bolt mount
12/00-04 Transit Van - VH BJ3469 BJ3468 TE3755 TE3755 RH-RE6620 Note - other suppliers list BJ3395 for Transit
see note LH-RE6619 Lower. Our BJ3395 suits for Territory Upper.

KING PIN LINK
SET
YEAR MODEL
TRW rack
2004-06 Transit Van - VJ RH-RE6620 RE6620 - 400mm 16x1.5 (socket) 16x1.5 (tre)
LH-RE6619 RE6619 - 400mm 20x1.5 (socket) 16x1.5 (tre)
TRW rack
2006-on Transit Van - VM RH-RE6620 RE6620 - 400mm 16x1.5 (socket) 16x1.5 (tre)
LH-RE6619 RE6619 - 400mm 20x1.5 (socket) 16x1.5 (tre)
TRW rack
UTILITY
1/88-3/96 Longreach Ute XG 4lt manual steer BJ94 BJ75 SX1119 TE548R TE548R TE549L TE549L SX809 SX1119 - rubber bushs' both ends
(18901) SX1119U - rubber/urethane combination
1/88-3/96 Longreach Ute XG power steer BJ94 BJ75 SX1119 TE548R TE548R TE549L TE549L SX809B SX1119 - rubber bushs' both ends
(18902) SX1119U - rubber/urethane combination
3/96-on Longreach Ute XH BJ317 BJ318 or TE818R TE818R RE1041 16mm Tie rod ends/Rack
(BJ296) BJ318OS (TE732) (TE732) (P191041) RE1041 - 349mm 14x1.5 (socket) 16x1.5 (tre)
(oversize) 16mm thread 16mm thread 5mm shorter
(BJ292) than RE818
FUSO - see MITSUBISHI
HILLMAN
1970-81 Avenger TE179R TE179R
1960-67 Hawk, Super Snipe TE125L TE125L TE125R TE125R
1959-62 Minx, Gazelle series III,IIIA,IIIB,IIIC KX185 TE125L TE125L TE125R TE125R
NLA
1962-67 Super Minx MkI,II,III,IV, Deluxe, Gazelle, BJ31 BJ32 TE125L TE125L TE125R TE125R
series V,VA,VI, Husky series III NLA NLA
1966-78 Hunter, Arrow, Royal, Hustler, Safari BJ56 SX1130 TE125L TE125L TE125R TE125R BJ56 - can use BJ119
HINO
1967-on TH80/300/360/400,TC30/300,8-10ton KX312

KING PIN LINK
SET
YEAR MODEL
1967-on TE11/61 6ton KX314
1973-on Harrier KR301 6-6.5ton - King pin long size KX319 King pin set 40 x 227mm
1973-on Harrier KR320/360,BX,KP - King pin short size KX319/1 King pin set 40 x 202mm
1964-on Ranger KM300/320/400 3.5ton KX315
1969-on Ranger KL320/400,HL,RL,KK KX275
1971-on Ranger KQ,FQ300/400/320/340,KM410 KX317
1971-on Ranger KF,ZM,TC,KB,TV,TW,RE 8-11ton KX318
1976-83 Ranger KL300 5ton KX275 TE601L TE601R
1979-83 Ranger KL340 6.5ton KX275 TE601L TE601R
all Ranger KL, KQ, KM TE601L TE601R
1982-on Ranger FD,FF,FT,GD,KD,KG,SD KX321 TE726L TE726R

& Super Hawk FD,FF,GP176
all FF192,FE193,FE197,FE,Raven KX324 King pin set 40 x 227mm

KING PIN LINK
SET
YEAR MODEL
HOLDEN
APOLLO
1973-74 Appollo (U.S.A.) BJ54 BJ55 or
BJ55OS
(oversize)
8/89-4/93 Apollo JK, JL - 2.0 4 cyl - Japanese Steering Rack BJ231 TE648 TE648 RE880 RE880 - 345mm 14x1.5 (socket) 14x1.5 (tre)
(TE9305) (TE9305) TE648 - Female RHT M14 x 1.5
8/89-4/93 Apollo JK, JL - 2.0 4 cyl - TRW Steering Rack BJ231 TE648 TE648 RH-RE1008 (P191008) - 14mm dia. shaft & 16mm thread @ rack shaft end RE1008 - 345mm 16x1.5 (socket) 14x1.5 (tre)
(TE9305) (TE9305) LH-RE1009 (P191009) - has recess for steering damper bracket RE1009 - 348mm 16x1.5 (socket) 14x1.5 (tre)
TE648 - Female RHT M14 x 1.5
4/93-8/97 Apollo JM, JP - 2.2 4 cyl & 3.0 V6 BJ920 TE991T TE991T RE1020 Front RE1020 - 357mm 16x1.5 (socket) 16x1.5 (tre)
(TRW BJ301) (TRW TE751) (TRW TE751) (P191020) STB4208 RE1020 - another alternate RE992
63mm note BJ301 & TE751 were original TRW numbers
Rear BJ301 & TE751 numbers now applicable to Hilux
STB4209
195mm
ASTRA
8/84-4/86 Astra LB, LC (TRW rack) BJ304 TE808R TE808R RE906 RE906 - 281mm 16x1.5 (socket) 12x1.25 (tre)
(BJ242) (TE664) (TE664) (P191001) TE808R - 90mm x 12x1.25
8/84-4/86 Astra LB, LC (imported rack) BJ304 TE808R TE808R RE857 RE857 - 280mm 16x1.0 (socket) 12x1.25 (tre)
(BJ242) (TE664) (TE664) male end TE808R - 90mm x 12x1.25
1986-on Astra LD - manual steer (TRW rack) BJ261 TE739 TE739 RE905 RE905 - 292mm 16x1.5 (socket) 14x1.5 (tre)
38mm press in 14x1.5 Female 14x1.5 Female (P191011) TRW steering rack
TE739 - 75mm 14x1.5 RHT Female
1986-4/88 Astra LD - power steer (imported rack) BJ261 TE713 TE713 RE857 RE857 - 280mm 16x1.0 (socket) 12x1.25 (tre)
(TE926) (TE926) male end TE713 - 95mm 12x1.25 RHT Female
imported BJ261 - push in Body dia. 38mm
4/88-89 Astra LD - power steer (TRW rack) BJ261 TE739 TE739 RE905 RE905 - 292mm 16x1.5 (socket) 14x1.5 (tre)
14x1.5 Female 14x1.5 Female (P191011) TRW steering rack
TRW TE739 - 75mm 14x1.5 RHT Female
BJ261 - push in Body dia. 38mm

KING PIN LINK
SET
YEAR MODEL
9/91-98 Astra TR (Astra 'F') BJ185 TE2383 TE2384 Front

Saginaw or ZF Rack (BJ874) check prior to ordering STB7653
16x2 Female 16x2 Female 6/96-8/98
RH Thread LH Thread
2/98-12/04 Astra TS (Astra 'G') BJ883 TE940 TE940 RE7021 Front TE940 - 'standard' style tie rod end
TRW Rack NLA (TE8128) (TE8128) (RE8128) STB7654 RE7021 - 308mm 18x1.5 (socket) 14x1.5 (tre)
2/98-12/04 Astra TS (Astra 'G') BJ883 Front

Delphi Rack NLA STB7654
04-06 Astra AH TE9345 TE9345 RE9345 TE9345 - 'straight' 14x1.5F (135.5mm long)
Female Female 300mm - 18x1.5mm socket RE9345 - 300mm 18x1.5 (socket) 14x1.5 (tre)
or RE9346 - 295mm 16x1.5 (socket) 14x1.5 (tre)
RE9346
295mm - 16x1.5mm socket
BARINA
2/85-1/89 Barina MB, ML, MF BJ400 TE3628R TE3628R RE1004 RE1004 - 285mm F14x1.5 (socket) 12x1.25 (tre)
inc. Arm 12mm thread 12mm thread (RE990) RE1003 - 268mm F14x1.5 (socket) 12x1.25 (tre)
12x1.25 female 12x1.25 female 285mm
or
RE1003
(RE7022/RE6404)
270mm
1991-94 Barina MH RH-BJ423R TE988 TE988 RE1004 RE1004 - 285mm F14x1.5 (socket) 12x1.25 (tre)
up to Chassis# JSAEAB35S00140001 (BJ4158) (RE990) BJ4158/BJ4159 - inc. arm
LH-BJ424L
(BJ4159)
inc. Arm
1994-97 Barina SB BJ841 TE941 TE941 RE950 RE950 - 290mm 14x1.5 (socket) 12x1.5 (tre)
2 bolt mount Male RE7135 - 326mm F14x1.5 (socket) 12x1.5 (tre)
90.75mm c/b to furthest bolt hole or CHECK RACK ENDS B4 ORDERING
RE7135 BJ841 & BJ941 - different ball stud tapers &
Female body lengths
BJ841 - replaces 90444294 up to V4166924 1.2 & 1.4
1997-00 Barina SB BJ941 TE941 TE941 RE950 RE950 - 290mm 14x1.5 (socket) 12x1.5 (tre)
RE7135 BJ941 - replaces 90542574 from V4166925
Female

KING PIN LINK
SET
YEAR MODEL
2001-10 Barina XC BJ2829 need sample need sample RE6424 Front RE6424 - 315mm F14x1.5 (socket) 12x1.5 (tre)
3 bolt mount STB7655 BJ2829 - replaces 09196394
2005-on Barina TK RE6656 RE6656 - 216mm 16x1.5 (socket) 12x1.5 (tre)

p/steer
CALIBRA
9/91-97 Calibra YE BJ185 TE2383 TE2384 Front Tie Rod Ends - some Calibra have TE940
check prior to ordering STB7653 standard style tie rod ends
16x2 Female 16x2 Female
CAMIRA
8/82-89 Camira JB, JD, JE BJ185 TE555L TE555R both tie rod ends - left hand thread
LH Thread LH Thread
COMMODORE
1978-7/84 Commodore VB, VC, VH, VK - manual steer BJ166 or TE525R TE525R RE821 Adjustable panhard rod - APR000
Gears Stamped 9945911 & 92014737 BJ166OS female end Control Arm - Front Lower R - CFL4R
(oversize) 285mm Control Arm - Front Lower L - CFL5L
Control Arm - Rear Upper - CRU1
Control Arm - Rear Lower - CRL2
Standard Z Bar no offset - ZBAR
1978-7/84 Commodore VB, VC, VH, VK - power steer BJ166 or TE526R TE526R RE819 Adjustable panhard rod - APR000
BJ166OS female end Control Arm - Front Lower R - CFL4R
(oversize) 265mm Control Arm - Front Lower L - CFL5L
7/84-86 Commodore VK - manual steer BJ166 or TE525R TE525R RE822 Front RE822 - 305mm 16x1.5 (socket) 14x2 (tre)
Gears Stamped 92025869 BJ166OS male end STB8211 Adjustable panhard rod - APR000
(oversize) 305mm Control Arm - Front Lower R - CFL4R
Control Arm - Front Lower L - CFL5L

KING PIN LINK
SET
YEAR MODEL
7/84-86 Commodore VH, VK - power steer BJ166 or TE526R TE526R RE820 Front RE820 - 290mm 16x1.5 (socket) 14x2 (tre)
BJ166OS (P191003) STB8211 Adjustable panhard rod - APR000
(oversize) male end Control Arm - Front Lower R - CFL4R
290mm Control Arm - Front Lower L - CFL5L
2/86-10/91 Commodore VL, VN - manual steer BJ166 or TE738 TE738 RE823 Front RE823 - 305mm 14x1.5 (socket) 14x2 (tre)
BJ166OS (P191012) VN Adjustable panhard rod - APR000
(oversize) can use can use 305mm STB8212 Control Arm - Front Lower R - CFL4R
TE526R TE526R (straight) Control Arm - Front Lower L - CFL5L
slight taper slight taper or Control Arm - Rear Upper - CRU1
difference difference STB8212HDP Control Arm - Rear Lower - CRL2
('Z' HD) Standard Z Bar no offset - ZBAR
STB8212HDP - VN-VT Sway Bar Link
2/86-7/93 Commodore VL, VN, VP - power steer BJ166 or TE738 TE738 RE824 Front RE824 - 305mm 14x1.5 (socket) 14x2 (tre)
BJ166OS (P191012) VN-VP Adjustable panhard rod - APR000
(oversize) can use can use 305mm STB8212 Control Arm - Front Lower R - CFL4R
TE526R TE526R (straight) Control Arm - Front Lower L - CFL5L
or Control Arm - Rear Upper - CRU1
STB8212HDP Control Arm - Rear Lower - CRL2
('Z' HD) Standard Z Bar no offset - ZBAR
7/93-9/97 Commodore VR, VS RH-BJ366R TE750 TE750 RE827 Front RE827 - 342mm 14x1.5 (socket) 16x1.5 (tre)
(BJ300R) (TE924) (TE924) (P191031) STB8212 Adjustable panhard rod - APR000
(BJ922) 16mm thread 16mm thread (RE951) (straight) Control Arm - Front Lower R - CFL6R
LH-BJ366L or Control Arm - Front Lower L - CFL7L
(BJ300L) STB8212HDP Control Arm - Rear Upper Non IRS - CRU1
(BJ923) ('Z' HD) Control Arm - Rear Lower Non IRS - CRL2
Exchange Arm Illustrations

KING PIN LINK
SET
YEAR MODEL
9/97-8/99 Commodore VT - to VIN# L492504 BJ450 TE750 TE750 RE1042 Front RE1042 - 330mm 14x1.5 (socket) 16x1.5 (tre)
Series 1 (BJ8035) (TE924) (TE924) (RE960) STB8212 BJ450 - ball joint with spigot
(BJ926) 16mm thread 16mm thread 330mm (straight) Standard Z Bar no offset - ZBAR2
spigot or Control Arm - Front Lower R - CFL10R
STB8212HDP Control Arm - Front Lower L - CFL11L
('Z' HD) STB8212HDP - VN-VT Sway Bar Link
Rear
with IRS
STB8830
8/99-12/02 Commodore VT - from VIN# L492505 BJ8036 TE3049 TE3049 RE3047 Front RE3047 - 330mm 14x1.5 (socket) 16x2 (tre)
Series 2 (BJ927) coarse thread coarse thread (RE961) STB8212 BJ8036 - ball joint with thread
thread 16x2.0 16x2.0 (straight) Standard Z Bar no offset - ZBAR2
or Control Arm - Front Lower R - CFL9R
STB8212HDP Control Arm - Front Lower L - CFL8L
('Z' HD) STB8212HDP - VN-VT Sway Bar Link
Rear
with IRS
STB8830
10/00-8/02 Commodore VX BJ8036 TE3049 TE3049 RE3047 Front RE3047 - 330mm 14x1.5 (socket) 16x2 (tre)
inc. Monaro (BJ927) coarse thread coarse thread (RE961) STB8208 Control Arm - Front Lower R - CFL9R
inc. VU Utility thread 16x2.0 16x2.0 or Control Arm - Front Lower L - CFL8L
STB8208HD VX2-VZ Rear Toe Adjuster - TE9830
(Heavy Duty) Standard Z Bar no offset - ZBAR2
Rear
with IRS
STB8830
9/02-8/04 Commodore VY BJ8036 TE3049 TE3049 RE3047 Front RE3047 - 330mm 14x1.5 (socket) 16x2 (tre)
inc. Monaro (BJ927) coarse thread coarse thread (RE961) STB8208 Control Arm - Front Lower R - CFL9R
thread 16x2.0 16x2.0 or Control Arm - Front Lower L - CFL8L
STB8208HD VX2-VZ Rear Toe Adjuster - TE9830

KING PIN LINK
SET
YEAR MODEL
(Heavy Duty) Standard Z Bar no offset - ZBAR2
Rear VY Crewman - STB8208&HD will not fit

with IRS Use STB4208 & trim as required
STB8830
8/04-06 Commodore VZ BJ8036 TE3049 TE3049 RE3047 Front RE3047 - 330mm 14x1.5 (socket) 16x2 (tre)
suits to Chassis No. 6L838608 (BJ927) coarse thread coarse thread (RE961) RH-STB8207 Control Arm - Front Lower R - CFL9R
not KYB Rack thread 16x2.0 16x2.0 socket 14x1.5 LH-STB8206 Control Arm - Front Lower L - CFL8L
inc. Crewman tre 16x2.0 VX2-VZ Rear Toe Adjuster - TE9830
excl. Monaro Rear Standard Z Bar no offset - ZBAR2
with IRS
STB8830
8/04-06 Commodore VZ BJ8036 TE3051 TE3051 RE3051 Front RE3051 - 315mm 22x1.5 (socket) 14x1.5 (tre)
from Chassis No. 6L838609-on with (BJ927) 14x1.5 14x1.5 socket 22x1.5 RH-STB8207 Control Arm - Front Lower R - CFL9R
KYB Rack thread tre 14x1.5 LH-STB8206 Control Arm - Front Lower L - CFL8L
inc. Crewman VX2-VZ Rear Toe Adjuster - TE9830
excl. Monaro Rear Standard Z Bar no offset - ZBAR2
with IRS
STB8830
8/04-06 Commodore VZ - Monaro Only BJ8036 TE3049 TE3049 RE3047 Front RE3047 - 330mm 14x1.5 (socket) 16x2 (tre)
thread 16x2.0 16x2.0 socket 14x1.5 STB8208
2006-on Commodore VE Rear of Front TE8275L TE8274R RE8273 Front RE8273 - 290mm 18x1.5 (socket) 14x1.5 (tre)
(Lower C/Arm) RH-STB8823 Caster Plates - S2958
RH-BJ3309R LH-STB8822
LH-BJ3310L
Rear
Front of Front STB8829
(Caster Bar)
RH-BJ3311R

KING PIN LINK
SET
YEAR MODEL
LH-BJ3312L
CRUZ
2002-06 Cruz - YG TE4610 TE4610 RE6407 RE6407 - 262mm F14x1.5 (socket) 12x1.25 (tre)
2009-on Cruz - JG
EPICA
1/07-on Epica EP RE6667 RE6667 - 368mm 12x1.0 (socket) F14x1.5 (tre)
GEMINI
1974-79 Gemini TX, TC, TD BJ117 BJ118 TE491R TE491R RE873 Rack End - can use RE845 manual steer
RE873 - 265mm F14x1.5 (socket) 14x1.5 (tre)
1979-85 Gemini TE, TF, TG BJ117 BJ118 TE491R TE491R RE845 RE845 - 263mm F14x1.5 (socket) 14x1.5 (tre)
female end
3/85-88 Gemini RB JT150/600 - manual steer BJ262 TE716R TE716R RE874 RE874 - 317mm 17x1 (socket) 12x1.25 (tre)
3/85-88 Gemini RB JT150/600 - power steer BJ262 TE716R TE716R RE875 RE875 - 317mm 14x1.5 (socket) 12x1.25 (tre)
HOLDEN
1938-52 Series 40,50 (to early 1942) 60,70,90 TE175L TE175L
1942-52 Series 40,50 TE52L TE52L Shackle Kit (Rear Hanger) - SK4856
NLA NLA to suit FJ wide springs
to suit 1948-52 narrow springs
1948-56 Holden 48, 50, FJ, SX17 KX17-010 SX1039 TE189R TE189R Upper Inner Repair Kit - SX1015RK

KING PIN LINK
SET
YEAR MODEL
upper outer king pin set idler support Lower Inner Repair Kit - SX1026RK
pivot pin 10 thou up or Shackle Kit (Rear Hanger) - SK4856
exchange SX1095 to suit FJ wide springs
SX18 inc. stub axle idler set Typical of Early GM type Front Suspension Shackle Kit (Rear Hanger) - SK4852
lower outer RH - KPFJR NLA to suit 1948-52 narrow springs
pivot pin LH - KPFJL idler support - connects idler arm to chassis
(FJ) idler set - connects support to centre rod
1956-59 Holden FE, FC SX17 KX17-010 SX1039 TE189R TE189R Upper inner control arm kit - SX1037A
upper outer king pin set idler support Lower inner control arm kit - SX1038A
pivot pin 10 thou up or Bush to suit SX1037A - 7408965
exchange SX1095 Bush to suit SX1038A - 7408958
SX18 inc. stub axle idler set Shackle Kit (Rear Hanger) - SK5659
lower outer RH - KPFER NLA idler support - connects idler arm to chassis
pivot pin LH - KPFEL idler set - connects support to centre rod
(early FE)
RH - KPEKR
LH - KPEKL
(late FE & FC)
1960-65 Holden FB, EK, EJ, EH all models SX71 KX194 SX1039 TE189R TE189R Upper inner control arm kit - SX1037A
upper outer king pin set idler support Lower inner control arm kit - SX1038A
pivot pin or Bush to suit SX1037A - 7408965
SX18 inc. stub axle idler set Shackle Kit (Rear Hanger) - SK6065
lower outer RH - KPEKR NLA idler support - connects idler arm to chassis
pivot pin LH - KPEKL idler set - connects support to centre rod
(FB & EK)
RH - KPEHR
LH - KPEHL
(EJ, EH & HD)
1964-65 Holden HD with king pin suspension SX71 KX194 SX1039 TE189R TE189R Upper inner control arm kit - SX1089A
EH panel van & utility with 2.25" brake upper outer king pin set idler support Lower inner control arm kit - SX1090A
pivot pin or SX1090A - remove & refit from front of vehicle only
SX18 inc. stub axle idler set Bush to suit SX1090A - 7428002
lower outer RH - KPEHR NLA Shackle Kit (Rear Hanger) - SK6065
pivot pin LH - KPEHL idler support - connects idler arm to chassis
idler set - connects support to centre rod
Exchange Holden King Pin Assembly Illustrations

KING PIN LINK
SET
YEAR MODEL
1965-67 Holden HD,HR with ball joint suspension BJ54 BJ55 or SX1039 TE189R TE189R TE358L TE358L TR838 Upper inner control arm kit - SX1094A
BJ55OS idler support exchange Lower inner control arm kit - SX1090A
(oversize) SX1090A - remove & refit from front of vehicle only
SX1095 Bush to suit SX1094A - 7427788
idler set Bush to suit SX1090A - 7428002
NLA Shackle Kit (Rear Hanger) - SK6065
idler support - connects idler arm to chassis
1968-71 Holden HK, HT & Early HG BJ54 BJ55 or SX1113 TE190L TE189R TE189R TE190L TR438 Upper inner control arm kit - SX1111A
11/16" Male thread tie rod ends BJ55OS idler support 11/16" male thread 11/16" male thread Lower inner control arm kit - SX1114A
(oversize) Bush to suit SX1111A - 7427788
SX1112 Bush to suit SX1114A - 7434230
idler set Shackle Kit (Rear Hanger) - SK6871
NLA idler support - connects idler arm to chassis
Tie Rod End Connecting Rod - TR196
1969-71 Holden Late HG BJ54 BJ55 or SX1113 TE195R TE195L TE195L TE195R TR360 Shackle Kit (Rear Hanger) - SK6871
9/16" Female thread tie rod ends BJ55OS idler support 9/16" female thread 9/16" female thread exchange idler support - connects idler arm to chassis
(oversize) SX1112 idler set - connects support to centre rod
idler set Female thread tie rod ends
NLA Tie Rod End Connecting Rod - TR195
Metal Bush Dimensions Typical Holden Coil Spring Suspension
If the Control Arm replacement kit you require is Kit Bush # per vehicle Correct Selection of Holden Drag Link
no longer manufactured, these metal bushes TR559B has an altered angle and position of one
are available. SX1037A 7408965 4 ball pin when compared to TR559. This is to
SX1038A 7408958 4 allow for radial tuned suspension. To check
SX1089A 7427788 4 which is required, position a straight edge along the
SX1090 7428002 4 centre rod line: if the straight edge is parallel to
SX1094A 7427788 4 the centre rod, it is a TR559; if the straight edge
Please ensure you follow manufacturers guidelines SX1111A 7427788 4 shows an angle, it is a TR559B. Check also for a
when replacing automotive components. SX1114A 7434230 4 casting 'B' on the TR559B for further identification.
1971-80 Holden HQ, HJ, HX sedan, van, utility & BJ54 BJ55 or SX1132 TE195R TE195L TE195L TE195R TR559 see Centre Link SX709 Shackle Kit (Rear Hanger) - SK7181
1ton cab/chassis - manual steer BJ55OS HQ/HJ Only 28.8mm ID to suit HQ-WB Ute/Van/1 Ton

KING PIN LINK
SET
YEAR MODEL
(oversize) Female thread tie rod ends

SX1132ARM - arm that SX1132 fits into SX1132ARM - normally non wear item
1971-80 Holden HQ, HJ, HX sedan, van, utility & BJ54 BJ55 or SX1132 TE195R TE195L TE195L TE195R TR559 see Centre Link SX709B Shackle Kit (Rear Hanger) - SK7181
1ton cab/chassis - power steer BJ55OS HQ/HJ Only 30.0mm ID to suit HQ-WB Ute/Van/1 Ton
1977-81 Holden HZ, WB - with radial tuned BJ54 BJ55 or SX1132 TE195R TE195L TE195L TE195R TR559B see Centre Link SX709 Shackle Kit (Rear Hanger) - SK7181
suspension - manual steer BJ55OS 28.8mm ID to suit HQ-WB Ute/Van/1 Ton
1977-81 Holden HZ, WB - with radial tuned BJ54 BJ55 or SX1132 TE195R TE195L TE195L TE195R TR559B see Centre Link SX709B Shackle Kit (Rear Hanger) - SK7181
suspension - power steer BJ55OS 30.0mm ID to suit HQ-WB Ute/Van/1 Ton
NOVA
1989-94 Nova LE,LF - manual steer RH-BJ270 TE648 TE648 RE1008 Front RE1008 - 345mm 16x1.5 (socket) 14x1.5 (tre)
LH-BJ271 82mm 82mm (P191008) STB4208 TE648 - Female RHT M14 x 1.5
(TE9305) (TE9305) 345mm 70mm
Rear
1989-94 Nova LE,LF - power steer RH-BJ270 TE648 TE648 RE867 STB4209 TE648 - Female RHT M14 x 1.5
LH-BJ271 82mm 82mm 330mm 108mm RE867 - 330mm 14x1.5 (socket) 14x1.5 (tre)
1994-on Nova LG - imported rack BJ550 TE648 TE648 RE1008 Front TE648 - Female RHT M14 x 1.5
82mm 82mm (P191008) STB4208 RE1008 - 345mm 16x1.5 (socket) 14x1.5 (tre)
63mm
1994-on Nova LG - TRW rack BJ550 TE648 TE648 RE1008 Rear TE648 - Female RHT M14 x 1.5
82mm 82mm (P191008) STB4209 RE1008 - 345mm 16x1.5 (socket) 14x1.5 (tre)
(TE9305) (TE9305) 345mm 108mm
PIAZZA
6/81-90 Piazza YB TE6410 TE6410 RE845 RE845 - 263mm F14x1.5 (socket) 14x1.5 (tre)
PONTIAC - see PONTIAC
STATESMAN

KING PIN LINK
SET
YEAR MODEL
1971-78 Statesman HQ, HJ, HX - manual steer BJ54 BJ55 or SX1132 TE195R TE195L TE195L TE195R TR559 see Centre Link SX709 Female thread tie rod ends
BJ55OS 28.8mm ID Tie Rod End Connecting Rod - TR195
(oversize) SX1132ARM - arm that SX1132 fits into
NLA
1971-78 Statesman HQ, HJ, HX - power steer BJ54 BJ55 or SX1132 TE195R TE195L TE195L TE195R TR559 see Centre Link SX709B Female thread tie rod ends
BJ55OS 30.0mm ID Tie Rod End Connecting Rod - TR195
NLA
1978-85 Statesman HZ, WB - manual steer BJ54 BJ55 or SX1132 TE195R TE195L TE195L TE195R TR559B see Centre Link SX709
BJ55OS 28.8mm ID
NLA
1978-85 Statesman HZ, WB - power steer BJ54 BJ55 or SX1132 TE195R TE195L TE195L TE195R TR559B see Centre Link SX709B
BJ55OS 30.0mm ID
NLA
1990-3/94 Statesman VQ BJ166 or TE526R TE526R RE824 RE824 - 305mm 14x1.5 (socket) 14x2 (tre)
BJ166OS (TE738) (TE738) (P191012)
(oversize) 305mm
3/94-6/99 Statesman VR, VS RH-BJ366R TE750 TE750 RE827 Adjustable panhard rod - RSAPR
(BJ300R) 16mm thread 16mm thread (P191031) Standard Z Bar no offset - ZBAR
LH-BJ366L (RE951) RE827 - 342mm 14x1.5 (socket) 16x1.5 (tre)
(BJ300L)
6/99-on Statesman WH - to VIN# L492688 BJ450 TE750 TE750 RE1042 NOTE: VIN change
(BJ8035) 16mm thread 16mm thread 330mm RE1042 - 330mm 14x1.5 (socket) 16x1.5 (tre)
spigot 16 x 1.5 16 x 1.5 16x1.5
6/99-on Statesman WH - from VIN# L492688 BJ8036 TE3049 TE3049 RE3047 NOTE: VIN change
thread 16mm thread 16mm thread 16x2.0 RE3047 - 330mm 14x1.5 (socket) 16x2 (tre)
16 x 2.0 16 x 2.0
TIGRA
10/05-9/07 Tigra XC - Electric Steering/Manual Rack RE6424 Front
STB7655
TORANA (Includes Sunbird)

1967-73 Torana HB, LC, LJ, TA - 4cyl BJ42 BJ57 TE179R TE179R
1/2" female thread

KING PIN LINK
SET
YEAR MODEL
1973-75 Torana TA - 4cyl BJ54 BJ55 or TE195R TE195R

BJ55OS 9/16" female thread
(oversize)
1969-73 Torana LC,LJ - 6cyl BJ54 BJ55 or TE195R TE195R RE826 RE826 - 292mm F7/8"x20tpi (socket) 9/16"x18tpi (tre)
BJ55OS
(oversize)
3/74-80 Torana, Sunbird LH, LX, UC - 4/6/8cyl BJ54 BJ55 or SX1132 TE195R TE195R P104023 SX709B P104023 - suits LX and UC only
BJ55OS LX & UC only power
(oversize) 290mm 30.0mm ID
or
RE7026
275mm
or
RE7025
thread change
1979-80 Torana, Sunbird UC - 4/6/8cyl BJ54 BJ55 or SX1132 TE195R TE195R P104023 SX709B
BJ55OS 290mm power
(oversize) or 30.0mm ID
RE7025
275mm
VECTRA
8/88-7/95 Vectra Sedan and Hatchback BJ185 TE2383 TE2384 Front
(BJ874) RH Thread LH Thread STB7653
threaded
8/95-01 Vectra Sedan and Hatchback BJ883 TE940 TE940 RE6418 Front RE6418 - 361mm 16x1.5 (socket) 14x1.5 (tre)
JR & JS spigot (RE2928) STB8824
NLA
2003-05 Vectra Sedan and Hatchback RE7021 Front RE7021 - 308mm 18x1.5 (socket) 14x1.5 (tre)
ZC TRW Rack STB8825
VIVA
9/05-on Viva JF RE896L RE896L - 305mm 16x1.5 (socket) 14x1.5 (tre)
ZAFIRA
6/01-5/06 Zafira RE7021 Front RE7021 - 308mm 18x1.5 (socket) 14x1.5 (tre)
STB7654

KING PIN LINK
SET
YEAR MODEL
HOLDEN - Commercial
ADVENTURA
2004-on Adventura BJ4193 TE750 TE750 RE818 Front RE818 - 355mm 14x1.5 (socket) 16x1.5 (tre)
OD 45.82 16 x 1.5 16 x 1.5 (P191017) STB4209 Sway Bar Link - VZ Adventra Only
300mm
BARINA COMBO VAN

1/94-97 Combo Van - SB BJ841 TE941 TE941 RE950 RE950 - 290mm 14x1.5 (socket) 12x1.5 (tre)
RE7135 BJ841 - replaces 90444294 up to V3023597
Female
97-00 Combo Van - SB BJ941 TE941 TE941 RE950 RE950 - 290mm 14x1.5 (socket) 12x1.5 (tre)
RE7135 BJ941 - replaces 90542574 from V3023598-on
Female
2000-10 Combo Van - XC BJ2829 BJ2829 - replaces 09196394

3 bolt mount
CAPTIVA
08-on Captive CE BJ6667 TE6667 TE6667 RE6667 RE6667 - 368mm 12x1.0 (socket) F14x1.5 (tre)
3 bolt mount
COLORADO
7/08-on Colorado RE6681 RE6681 - 309mm 18x1.5 (socket) 14x1.5 (tre)
CREWMAN
2003-04 Cross 8 BJ4193 TE750 TE750 RE818 RE818 - 355mm 14x1.5 (socket) 16x1.5 (tre)
OD 45.82 16 x 1.5 16 x 1.5 (P191017)
D-MAX (2WD)
02-07 TFR, TFB, TFS BJ5361 BJ282 TE5361 TE5361 RE6423 RE6423 - 315mm 14x1.5 (socket) 14x1.5 (tre)
4 bolt mount Female 14x1.5 BLD 16.3mm p/steer

KING PIN LINK
SET
YEAR MODEL
06-07 TFR, TFB TE5361 TE5361

for High Ride Suspension
D-MAX (4WD)
02-03 TFR, TFB, TFS BJ5311 BJ282 TE5361 TE5361
3 bolt mount Female 14x1.5 BLD 16.3mm
03-06 TFR, TFB, TFS BJ5311 TE5361 TE5361

for High Ride Suspension 3 bolt mount Female 14x1.5 BLD 16.3mm
03-05 TFR, TFB, TFS P/S TE5361 TE5361

for High Ride Suspension
07-on TFR85 RE6681 RE6681 - 309mm 18x1.5 (socket) 14x1.5 (tre)
DROVER
1985-87 Drover QB 4WD TE692L TE692R TE693 TE693 DL307 DL307 - 740mm c/e BLD 12.53mm
'short' tie rod ends 'long' with two ball studs DL307 - 12.85-12.10 tapered hole
Tie Rod Ends - only one of each per vehicle
FRONTERA
10/95-1/99 Frontera MB BJ203 BJ282 TE210L TE210R RE6425 RE6425 - 330mm 14x1.5 (socket) 14x1.5 (tre)
(BJ805) (BJ806) (TE966) (TE967)
2/99-11/02 Frontera MX BJ282 RE867 Front RE867 - 330mm 14x1.5 (socket) 14x1.5 (tre)
(BJ806) UES STB4209 STB4209 - Universal - Trim to length
150mm
RH-STB8138
LH-STB8139
ISUZU - see ISUZU

KING PIN LINK
SET
YEAR MODEL
JACKAROO
11/81-10/86 Jackaroo UBS13,16,52 4WD & 2WD wagon BJ203 BJ202 SX7660 TE596R TE596R RE847 TR625 BJ202 - 70mm centre to centre between mounting
(SX3251) Female RHT holes closest to ball stud & 30mm centre to centre
idler pivot BLD-14mm BHD-16mm TR625 between mounting holes furthest from ball stud
M14x1.5 M14x1.5 TE596R - 76mm 14x1.5 RHT BLD 13.68mm
TR625 - 660mm overall length
RE847 - 248mm F14x1.5 (socket) 14x1.5 (tre)
11/86-11/91 Jackaroo UBS17,55 4WD & 2WD wagon BJ203 BJ282 SX7660 TE210L TE210R TE210R TE210L BJ282 - 62mm centre to centre between mounting
(BJ806) (SX3251) (TE5281L) (TE5281R) (TE5281R) (TE5281L) holes closest to ball stud & 80mm centre to centre
idler pivot Female LHT Female RHT Female RHT Female LHT between mounting holes furthest from ball stud
BLD-16mm BHD-18mm BLD-16mm BHD-18mm TE210 - 72mm 14x1.5 Female BLD 16mm
Different Tie Rod End configurations identified L vs R BJ282 - 4 bolt mount BLD 20.7mm
Please determine correct orientation prior to ordering.
12/91-97 Jackaroo UBS25,69 4WD BJ428 BJ282 SX7660 TE210L TE210R TE210R TE210L TR890 Front TE210 - 72mm 14x1.5 Female BLD 16mm
(BJ804) (SX3251) (TE5281L) (TE5281R) (TE5281R) (TE5281L) or RH-STB8139 BJ282 - 4 bolt mount BLD 20.7mm
idler pivot (TE966) (TE967) (TE967) (TE966) TR626 LH-STB8138
Female LHT Female RHT Female RHT Female LHT Rear

BLD-16mm BHD-18mm BLD-16mm BHD-18mm STB8140
M14x1.5 M14x1.5 M14x1.5 M14x1.5
Different Tie Rod End configurations identified L vs R
1997-on Jackaroo UBS25 4WD BJ5312 TE210L TE210R TE210R TE210L TR890 Front
(BJ4370) (TE5281L) (TE5281R) (TE5281R) (TE5281L) or RH-STB8139
(TE966) (TE967) (TE967) (TE966) TR626 LH-STB8138
Female LHT Female RHT Female RHT Female LHT Rear

BLD-16mm BHD-18mm BLD-16mm BHD-18mm STB8140
LUV
1972-81 Luv 2WD KB20,25 BJ201 BJ202 TE595L TE595R TR668 BJ202 - 4 bolt mount BLD 20.8mm
BJ201 - please specify if lock nut is required
RODEO (2WD)
1972-81 Rodeo KB20,KB25 2WD BJ201 BJ202 TE595L TE595R TR668 BJ202 - 4 bolt mount BLD 20.8mm
BJ201 - please specify if lock nut is required
6/81-88 Rodeo KB & KBD26,27,28 2WD 1000kg BJ203 BJ204 SX7660 TE596R TE596R RE846 TR625 BJ204 - 42mm centre to centre between mounting
Rodeo KB21,KB22,KB26,KB27 (BJ805) 4 bolt mount (SX3251) Female RHT female end holes. Holes closest to ball stud = no thread.
idler pivot BLD-14mm BHD-16mm TR625 Furthest from ball stud = threaded.

KING PIN LINK
SET
YEAR MODEL
4 bolt mount TE596R - 76mm 14x1.5 RHT BLD 14mm

M14x1.5 M14x1.5 RE846 - 270mm F14x1.5 (socket) 14x1.5 (tre)
5/88-03 Rodeo TFR 2WD BJ203 BJ281 SX7660 TE210L TE210R TE210R TE210L TR890 Front BJ281 - 52mm centre to centre between mounting
(BJ805) 4 bolt mount (SX3251) (TE5281L) (TE5281R) (TE5281R) (TE5281L) (Chassis JAATFR…. Onwards) RH-STB8138 holes. Holes closest to ball stud = no thread.
4 bolt mount idler pivot Female LHT Female RHT Female RHT Female LHT or LH-STB8139 Furthest from ball stud = threaded.
(1991-95) BLD-16mm BHD-18mm BLD-16mm BHD-18mm TR626 TE210 - 72mm 14x1.5 Female BLD 16mm
or M14x1.5 M14x1.5 M14x1.5 M14x1.5 check prior to ordering
BJ5311 Different Tie Rod End configurations identified L vs R
3 bolt mount Please determine correct orientation prior to ordering.
(1996-04)
2/03-11/05 Rodeo TFR, RA 2WD BJ5361 BJ282 TE5361 TE5361 RE6423 Front RE6423 - 315mm 14x1.5 (socket) 14x1.5 (tre)
TFB & D-Max 4 bolt mount Female 14x1.5 BLD 16.3mm (RE5360) RH-STB8138
or LH-STB8139
BJ5311 Rear
3 bolt mount STB7253
12/05-6/08 Rodeo RA 2WD BJ5361 BJ282 TE5361 TE5361 RE6681 RE6681 - 309mm 18x1.5 (socket) 14x1.5 (tre)
4 bolt mount Female 14x1.5 BLD 16.3mm
or
BJ5311
3 bolt mount
BJ201 BJ202 bj203 bj204
RODEO (4WD)
5/79-81 Rodeo KB40,KB41 4WD wagon BJ201 BJ202 SX7660 TE596R TE596R RE847 BJ201 - please specify if lock nut is required
(SX3251) Female RHT BJ202 - 4 bolt mount BLD 20.8mm
press in 4 bolt mount idler pivot BLD-14mm BHD-16mm TR691# TE596R - 76mm 14x1.5 RHT BLD 14mm
(555#) RE847 - 248mm F14x1.5 (socket) 14x1.5 (tre)
M14x1.5 M14x1.5
6/81-4/87 Rodeo KB4 & KBD4 series 4WD wagon BJ203 BJ202 SX7660 TE596R TE596R RE847 TR625 BJ202 - 4 bolt mount BLD 20.8mm
Rodeo KB41,KB42,KB46,KB47 (SX3251) Female RHT TR625 TE596R - 76mm 14x1.5 RHT BLD 14mm

KING PIN LINK
SET
YEAR MODEL
4 bolt mount 4 bolt mount idler pivot BLD-14mm BHD-16mm TR691# TR625 - 660mm overall length
(555#) RE847 - 248mm F14x1.5 (socket) 14x1.5 (tre)
M14x1.5 M14x1.5
5/87-5/89 Rodeo TFS17,54 4WD BJ203 BJ202 SX7660 TE596R TE596R RE847 TR625 SX9710 - same as SX7660 but with bracket
(SX3251) Female RHT TR625 BJ202 - 4 bolt mount BLD 20.8mm
4 bolt mount 4 bolt mount idler pivot BLD-14mm BHD-16mm TR691# TE596R - 76mm 14x1.5 RHT BLD 14mm
or (555#) TR625 - 660mm overall length
SX9710 M14x1.5 M14x1.5 RE847 - 248mm F14x1.5 (socket) 14x1.5 (tre)
idler pivot
with bracket
5/89-03 Rodeo TFR16,17 & TFS55 4WD BJ203 BJ282 SX7660 TE210L TE210R TE210R TE210L TR890 Front TE210 - 72mm 14x1.5 Female BLD 16mm
(BJ805) (SX3251) (TE5281L) (TE5281R) (TE5281R) (TE5281L) RH-STB8138 SX9710 - same as SX7660 but with bracket
4 bolt mount 4 bolt mount idler pivot Female LHT Female RHT Female RHT Female LHT LH-STB8139 BJ282 - 4 bolt mount BLD 20.8mm
(1991-97) or BLD-16mm BHD-18mm BLD-16mm BHD-18mm Rear
or SX9710 M14x1.5 M14x1.5 M14x1.5 M14x1.5 STB7253
BJ5311 idler pivot Different Tie Rod End configurations identified L vs R
3 bolt mount with bracket Please determine correct orientation prior to ordering.
(1998-04)
2/03-11/05 Rodeo TFR16,17 & TFS55, RA 4WD BJ5361 BJ282 TE5361 TE5361 RE6423 RE6423 - 315mm 14x1.5 (socket) 14x1.5 (tre)
with rack & pinion steering 4 bolt mount Female 14x1.5 BLD 16.3mm
or
BJ5311
3 bolt mount
12/05-2009 Rodeo RA 4WD BJ5361 BJ282 TE5361 TE5361 RE6681 RE6681 - 310mm 18x1.5 (socket) 14x1.5 (tre)
with rack & pinion steering 4 bolt mount Female 14x1.5 BLD 16.3mm
or
BJ5311
3 bolt mount
BJ201 BJ202 bj203 bj204

KING PIN LINK
SET
YEAR MODEL
bj281 bj282 sx7660 sx9710
SHUTTLE
1981-on Shuttle Van & Wagon - all models BJ203 BJ252 TE727R TE727R TE728L TE728L
HONDA
ACCORD
76-4/81 Accord SJ,SM,SV BJ4114L TE627R TE627R RE851 Ball joint with arm
(BJ1207) (TE681) (TE681) male end Previous catalogues listed TE627R to suit
inc. Arm Toyota Stout - please specify application
75mm long - straight when ordering TE627R to avoid confusion.
5/81-9/83 Accord SY,SZ RH-BJ4115R TE627R TE627R RE849 Ball joint with arm
(BJ4115) (TE681) (TE681) male end RE849 - 295mm 12x1.25 (socket) 12x1.25 (tre)
LH-BJ4116L 295mm Previous catalogues listed TE627R to suit
(BJ4116) 75mm long - straight Toyota Stout - please specify application
inc. Arm when ordering TE627R to avoid confusion.
6/83-1985 Accord AC,AD RH-BJ4121R TE627R TE627R RE852 Ball joint with arm
LH-BJ4122L Toyota Stout - please specify application
(BJ4122) 75mm long - straight when ordering TE627R to avoid confusion.
inc. Arm
1985-90 Accord CA RH-BJ4130R BJ556 TE627R TE627R RE849 Ball joint with arm
(BJ4130) (BJ279) (TE681) (TE681) male end RE849 suits all with housing tube length 330-390mm
LH-BJ4131L 295mm RE849 - 295mm 12x1.25 (socket) 12x1.25 (tre)
(BJ4131) 75mm long - straight manual & power RE852 suits with housing tube length 414mm
inc. Arm RE852 - 295mm 12x1.25 (socket) 12x1.25 (tre)

RE852 Previous catalogues listed TE627R to suit
BJ481+ARM BJ5114 (RE7028) Toyota Stout - please specify application
REAR REAR power steer when ordering TE627R to avoid confusion.
inc. arm inc. arm housing tube length 414mm
1990-93 Accord CB BJ565 BJ558 TE962 TE961 RE6180 Front RE6180 - 162mm 12x1.25 (socket) 14x1.5 (tre)
or or (RE970) STB8155
RH-BJ429R RH-BJ5125R (RE7029) Rear
(BJ6181R) LH-BJ5125L STB8161
LH-BJ430L inc. arm
(BJ6181L)

KING PIN LINK
SET
YEAR MODEL
inc. Arm
RH-BJ482R RH-BJ5117R
LH-BJ483L LH-BJ5117L
REAR REAR
1994-on Accord CB BJ565 BJ558 TE962 TE961 RE6180 Front RE6180 - 162mm 12x1.25 (socket) 14x1.5 (tre)
or or (RE970) to 1998
RH-BJ7706R RH-BJ5126R (RE7029) STB8155
(BJ5118R) LH-BJ5126L Rear
LH-BJ7706L arm only STB8161
(BJ5118L)
1995-97 Accord CC,CD,CE BJ565 BJ558 TE6211L TE6211R RE6210 Front RE7428 - 172mm 12x1.25 (socket) 14x1.5 (tre)
or (TE5621L) (TE5621R) (RE5621) STB8155
RH-BJ7706R Rear
(BJ5118R) RE7428 STB8156
LH-BJ7706L Accord CD
(BJ5118L)
inc. Arm
1998-02 Accord CG,CH RH - BJ5623R BJ5618 TE5623L TE5623R RE5623 Front

LH - BJ5623L RH-STB8163
inc. Arm LH-STB8162
Rear
RH-STB8165
LH-STB8164
2001-06 Accord CL7 TE6311L TE6311R 6/03-on

Front
RH-STB7168
LH-STB7167
Rear
RH-STB8165
LH-STB8164
2005-on Accord CM RE7427 Front

RH-STB7168
LH-STB7167
Rear
RH-STB8165
LH-STB8164
ACTY - see HONDA COMMERCIAL

KING PIN LINK
SET
YEAR MODEL
CITY - see HONDA COMMERCIAL
CIVIC
1973-75 Civic SB RH-BJ4001R TE627R TE627R RE848 Ball joint with arm and bar
LH-BJ4002L Previous catalogues listed TE627R to suit
1973-79 Civic EB series BJ4111R TE627R TE627R RE848 Ball joint with arm
(BJ1248) Previous catalogues listed TE627R to suit
inc. Arm 75mm long - straight Toyota Stout - please specify application
when ordering TE627R to avoid confusion.
1975-79 Civic SC,SE,SF,SG,SH,SK,SP BJ4111R TE627R TE627R RE848 Ball joint with arm
(BJ1248) Previous catalogues listed TE627R to suit
1979-83 Civic SL,SR,SS,ST,WC,VC,VE BJ4112L TE627R TE627R RE849 Ball joint with arm
(BJ1237) 295mm Previous catalogues listed TE627R to suit
1983-87 Civic AG,AH,AJ,AK,AL,AT,AV,VJ,AR RH-BJ4118R TE627R TE627R RE850 Ball joint with arm
LH-BJ4119L 315mm Previous catalogues listed TE627R to suit
1987-8/91 Civic EF,ED,EY RH-BJ4238R BJ556 TE718L TE718R RE869 Upper arm and ball joint
(BJ4238) (BJ279) (RE7032) RE869 - 180mm 12x1.25 (socket) 14x1.5 (tre)
LH-BJ4239L BLD-12.74mm BLD-12.74mm
(BJ4239) 180mm long - with bend
inc. Arm

KING PIN LINK
SET
YEAR MODEL
8/91-93 Civic EF,ED,EY RH-BJ4238R BJ556 TE718L TE718R RE3010 Upper arm and ball joint
inc. Arm
1993-99 Civic EG,EH,EJ,EK BJ565 BJ556 TE6191L TE6191R RE3010 1996-99 Rear Upper Arm - ARM455R
or (BJ279) (TE3560) (TE3540) Front RE3010 - 190mm 12x1.25 (socket) 14x1.5 (tre)
RH-BJ431R BLD-12.65mm BLD-12.65mm STB8075
(BJ6191R) 177mm long - with bend Rear
LH-BJ432L RH-STB8110
(BJ6191L) LH-STB8111
inc. Arm
1993-97
VTEC
Front
STB8077
Rear
RH-STB8080
LH-STB81122
2000-06 Civic EU & ES BJ6242 TE879 TE879 RE1054 Front

(TE6241) (TE6241) (RE5615) RH-STB8154
(RE7034) LH-STB8153
Rear
RH-STB7152
LH-STB7151
CONCERTO
1987-92 Concerto RH-BJ4238R BJ556 TE718L TE718R RE869 RE869 - 180mm 12x1.25 (socket) 14x1.5 (tre)
(BJ4238) (BJ279) (RE7032)
inc. Arm

KING PIN LINK
SET
YEAR MODEL
CRV
1995-2001 CRV RD1 & RD2 RH-ARM1129R BJ556 TE6191L TE6191R RE6220 1997-01 RE6220 - 223mm 12x1 (socket) 14x1.5 (tre)
(BJ5608R) (TE3560) (TE3540) 223mm Front
LH-ARM1129L or BLD-12.65mm BLD-12.65mm STB-8075
(BJ5608L) RH-ARM1130R 177mm long - with bend Rear
inc. Arm LH-ARM1130L RH-STB8137
inc. Arm LH-STB8141
2001-06 CRV RD4 & RD5 TE6241 TE6241 RE1076 2002-04 RE1076 - 558mm 14x1.25 (socket) 14x1.5 (tre)
558mm Front
RH-STB8154
LH-STB8153
Rear
RH-STB7154
LH-STB7153
2006-on CRV RE3 & RE4 BJ5122 TE5321 TE5321 RE5320
CRX
7/83-10/87 CRX AE, AF, AS RH-BJ4118R TE627R TE627R RE850 Previous catalogues listed TE627R to suit
(BJ1209) (TE681) (TE681) male end Toyota Stout - please specify application
LH-BJ4119L 315mm when ordering TE627R to avoid confusion.
(BJ1210) 75mm long - straight RE850 - 315mm 12x1.25 (socket) 12x1.25 (tre)
inc. Arm
11/87-5/92 CRX EF,ED series 2 door coupe RH-BJ4238R BJ556 TE718L TE718R RE869 Upper arm and ball joint
LH-BJ4239L 180mm long with bend
(BJ4239) BLD-12.74mm BLD-12.74mm
inc. Arm
6/92-97 CRX EG series 2 door coupe RH-BJ431R BJ556 TE6191L TE6191R RE3010 Upper arm and ball joint
(BJ6191R) (BJ279) (TE3560) (TE3540) (RE7033) RE3010 - 190mm 12x1.25 (socket) 14x1.5 (tre)
LH-BJ432L 177mm long with bend
(BJ6191L) BLD-12.65mm BLD-12.65mm
inc. Arm
HORIZON
4/92-on Horizon Front
STB4209
150mm
Rear
STB4209

KING PIN LINK
SET
YEAR MODEL
210mm
HRV
1995-98 HRV RE1076 RE1076 - 223mm 12x1 (socket) 14x1.5 (tre)
(RE6220)
1998-on HRV GH1, GH2 2WD BJ6302 RE6320 Front

STB7162
Rear
STB7163
1999-on HRV GH3, GH4 4WD BJ6302 RE6320 Front

STB7162
Rear
STB7163
INTERGRA
1986-92 Integra DA BJ556 TE627R TE627R RE850 RE850 - 315mm 12x1.25 (socket) 12x1.25 (tre)
315mm Toyota Stout - please specify application
75mm long - straight when ordering TE627R to avoid confusion.
1993-97 Integra DB,DC RH-BJ431R BJ556 TE6191L TE6191R RE3010 RE3010 - 190mm 12x1.25 (socket) 14x1.5 (tre)
(BJ6191R) (BJ279) (TE3560) (TE3540) (RE6400)
LH-BJ432L 180mm long with bend (RE7035)
(BJ6191L) BLD-12.64mm BLD-12.64mm
inc. Arm
JAZZ
2003-on Jazz TE2157 TE2157 RE7036 TE2157 - M12x1.25 female
LEGEND
1986-90 Legend KA RH-BJ5613R BJ351 TE852L TE851R RE5622
LH-BJ5613L (RE901)
inc. Arm
1991-95 Legend RH-BJ453R BJ5613 TE5622L TE5622R RE5622

(BJ5122R) ball joint only (RE7037)
LH-BJ454L (RE901)
(BJ5122L)
inc. Arm
RH-BJ5123R RH-BJ5616R
LH-BJ5123L LH-BJ5616L
(rear) (rear)
inc. Arm inc. Arm

KING PIN LINK
SET
YEAR MODEL
ODYSSEY
1995-98 Odyssey RA1, RA2, RA3, RA4 RH-BJ7706R TE6211L TE6211R RE6210 Front Upper Ball Joint - BJ565
(BJ5118R) (TE5621L) (TE5621R) (RE5621) STB8155
LH-BJ7706L Rear
(BJ5118L) STB8156
inc. Arm
1999-02 Odyssey BJ5624 TE5624 TE5624 RE5620 Front

STB8157
3/04-on Odyssey RE6682 RE6682 - 140mm 18x1.5 (socket) 14x1.5 (tre)
PRELUDE
1979-83 Prelude SN coupe BJ4247R TE627R TE627R RE849 Previous catalogues listed TE627R to suit
(BJ4247) (TE681) (TE681) (RE7030) Toyota Stout - please specify application
inc. Arm male end when ordering TE627R to avoid confusion.
75mm long - straight 295mm RE849 - 295mm 12x1.25 (socket) 12x1.25 (tre)
1983-91 Prelude AB,BA - 4WS (not BA4, BA5 or BA8) BJ280 BJ556 TE627R TE627R RE853 BJ556 - press in Body dia. 40mm
285mm Toyota Stout - please specify application
BLD-12.98mm BLD-12.98mm when ordering TE627R to avoid confusion.
1987-91 Prelude BA4 coupe - four wheel steer BJ412 BJ556 TE850R TE850R RE853 RE853 - 280mm 12x1.25 (socket) 12x1.25 (tre)
(BJ350) (BJ279) male end
(front) BLD-14.05mm BLD-14.05mm 285mm
RH-BJ6165R
LH-BJ6165L
(rear)
1987-91 Prelude BA5 coupe - four wheel steer BJ412 BJ556 TE850R TE850R RE853 RE853 - 280mm 12x1.25 (socket) 12x1.25 (tre)
(BJ350) (BJ279) male end
(front) 285mm
(front)
RH-BJ6165R
LH-BJ6165L BJ6166
(rear) (rear)
1991-on Prelude BA8 coupe - four wheel steer BJ5622 RE5625

(RE7040)
1992-96 Prelude - BA & BB RH-BJ5625R BJ5622 TE878 TE877 RE5625 Front

LH-BJ5625L (TE5625L) (TE5625R) (RE7040) STB8076
inc. Arm

KING PIN LINK
SET
YEAR MODEL
1997-01 Prelude - BB RH-BJ5626R BJ5626 TE878 TE877 RE5625 Front

LH-BJ5626L (TE5625L) (TE5625R) (RE7040) Standard
inc. Arm STB8158
SH model
RH-STB8160
LH-STB8159
SHUTTLE
1/84-10/97 Shuttle AR 4WD RE840
HONDA - Commercial
10/82-86 Acty, TA,TB,VD,TN TE627R TE627R RE849 Previous catalogues listed TE627R to suit
(TE681) (TE681) 295mm Toyota Stout - please specify application
RE850 when ordering TE627R to avoid confusion.
315mm RE849 - 295mm 12x1.25 (socket) 12x1.25 (tre)
11/81-6/86 City, AA,VF,FA,GA - exc. Turbo TE627R TE627R RE849 Previous catalogues listed TE627R to suit
4/84-6/98 City, AA,VF,FA,GA - inc. Turbo TE627R TE627R RE849 Previous catalogues listed TE627R to suit
HYUNDAI

KING PIN LINK
SET
YEAR MODEL
ACCENT
1995-99 Accent BJ925 TE965 TE965 RE973 F&R BJ925 - press in Body dia. 40mm
press in (RE3723) STB7180
2000-4/06 Accent - LC BJ285 TE545R TE545R RE974 Front RE974 - 323mm 16x1.5 (socket) 14x1.5 (tre)
(BJ32270) (RE7042) RH-STB7182
(RE32775) LH-STB7181
Rear
STB7183
5/06-on Accent BJ5176
ELANTRA
10/00-9/02 Elantra BJ285 TE545R TE545R Front
(BJ32270) STB7186
Rear
STB7185
2/03-8/06 Elantra BJ285 TE545R TE545R Front

(BJ32270) STB7186
Rear
STB7187
EXCEL Various Rack Ends identified to suit Excel.

1986-90 Excel X1 RH-BJ169 TE3665R TE3665R Please check measurements b4 ordering.
(BJ1169) (TE552R) (TE552R)
LH-BJ170 74mm 74mm
(BJ1170) M14x1.5 RHT M14x1.5 RHT
1989-94 Excel X2 - power steer BJ409 TE3665R TE3665R

(BJ1409) (TE552R) (TE552R)
2 bolt mount 74mm 74mm
1990-6/96 Excel X2 - manual steer BJ409 TE3665R TE3665R 1992-95

(BJ1409) (TE552R) (TE552R) Front
2 bolt mount 74mm 74mm STB8166
or or
TE730R TE730R

KING PIN LINK
SET
YEAR MODEL
80mm 80mm
12x1.25mm thread 12x1.25mm thread
7/96-00 Excel X3 BJ409 TE3665R TE3665R

(BJ1409) (TE552R) (TE552R)
BJ925 or or
press in TE730R TE730R
80mm 80mm
GETZ
2002-on Getz (Click) - p/steer TE38040 TE38040 RE7426 Rear RE7426 - 337mm 16x1.5 (socket) 14x1.5 (tre)
STB4209 STB4209 Universal Fit - trim to length
GRANDEUR
7/99-1/04 Grandeur XG RE6688 Rear RE6688 - 189mm 16x1.5 (socket) 14x1.5 (tre)
STB4209
180mm
Front
STB7190 Specific Fit
Rear
STB7192 Specific Fit
i30
2007-11 i30 TE2300L TE2300R
LANTRA Various Rack Ends identified to suit

5/91-10/92 Lantra KF BJ409 TE730R TE730R Hyundai Lantra. Please check measurements Front RE972 - overall length 315m
(BJ1409) 80mm 80mm prior to ordering. STB4208 BJ1409 - 2 bolt mount
2 bolt mount 12x1.25mm thread 12x1.25mm thread 60mm STB4208 Universal Fit - trim to length

KING PIN LINK
SET
YEAR MODEL
STB8167 STB8167 Specific Fit

RE972 - 320mm
11/92-8/95 Lantra KF BJ925 TE730R TE730R Front RE973 - overall length 315mm
press in 80mm 80mm STB4208 BJ925 - press in Body dia. 40mm
12x1.25mm thread 12x1.25mm thread RE973 (RE3723) - 325mm 60mm STB4208 Universal Fit - trim to length
5/95-10/00 Lantra J2,J3 inc. Sports Wagon TE545R TE545R Front

re889 STB4208 STB4208 Universal Fit - trim to length
60mm
Rear
STB4209
130mm
S COUPE
6/90-3/96 S Coupe BJ409 TE3665R TE3665R RE889 RE1888 - overall length 300mm
(BJ1409) (TE552R) (TE552R) RE889 - orverall length 320mm
SANTA FE
11/00-6/06 Santa Fe BJ3403 RE7039 Front RE7039 - 343mm 16x1.5 (socket) 14x1.5 (tre)
STB7188
5/06-on Santa Fe - CM BJ3403 RE6694 RE6694 - 213mm 16x1.5 (socket) 16x1.5 (tre)
SONATA
1/89-10/93 Sonata AF BJ925 TE965 TE965 RE974 Front RE974 - 323mm 16x1.5 (socket) 14x1.5 (tre)
press in male end STB7189 BJ925 - press in Body dia. 40mm
10/93-98 Sonata DF BJ294 front TE965 TE965 RE975 1995-98 RE975 - 344mm 16x1.5 (socket) 14x1.5 (tre)
(BJ802) (RE7045) Front BJ294 - Press in Body dia. 43mm
ball joint only STB8044
or Rear
RH-BJ4151 STB8036
LH-BJ4150
inc. Arm
rear of vehicle
BJ803
ball joint only
2 req. each side

KING PIN LINK
SET
YEAR MODEL
1999-02 Sonata EF BJ5438 BJ5138 TE5389L TE5389R RE7034 Rear RE7034 - 190mm 16x1.5 (socket) 14x1.5 (tre)
STB4209 STB4209 Universal Fit - Trim to length
Front
Rear
to 9/01
10/01-on
TERRACAN
7/01-on Terracan
TIBURON
3/02-on Tuburon Coupe RE7046 Front RE7046 - 347mm 16x1.5 (socket) 14x1.5 (tre)
RH-STB7194
LH-STB7193
Rear
STB7192
TRAJET
5/00-06 Trajet F&R
RH-STB7198
LH-STB7197
TUCSON
8/04-11/09 Tucson BJ8042 RE6695 RE6695 - 258mm 16x1.5 (socket) 16x1.5 (tre)
HUMBER
1957-60 New Hawk Series I, New Super Snipe I,II KX73 TE125L TE125L TE125R TE125R
NLA
1960-67 Hawk Series IA,II,III,IV, Super Snipe III,IV,V KX199 TE125L TE125L TE125R TE125R
1962-67 Vogue MkI,II,III,IV, Sceptre MkI,II BJ31 BJ32 TE125L TE125L TE125R TE125R
NLA NLA
HUMMER
8/07-4/10 H3 RE6655 RE6655 - 302mm 16x1.5 (socket) 16x1.5 (tre)
p/steer
INTERNATIONAL 4WD
1974-80 Scout, Traveller BJ490 BJ489 310-270 310-288 310-270 - has hole for steering damper

KING PIN LINK
SET
YEAR MODEL
(305-112) (10253) (ES2052R) (ES2053R) BJ489 - press in Body dia. 44.5mm
INTERNATIONAL TRUCKS
1950-68 190 series with FA80 & FA91 axles 300-110 TE174L TE174R King pin set with metal bushes
1.234" x 7.66"
1950-68 190 series with FA100 axle 9000lb TE419L TE419R
1958-66 170,180,1890 series with FA65 axle 300-110 TE174L TE174R King pin set with metal bushes
1.234" x 7.66"
1961-73 106,110,120,130,700,800,900,1100,1200, 1300, 300-112 TE175L TE175R King pin set with metal bushes
series with FA1 & FA10 axles 0.8605" x 5.44"
1962-68 C150,1500,M1200,1400,1500 series with FA28 & 300-118 310-100 310-101 King pin set with metal bushes
FA48 axles 4700lb 1.1095" x 6.25"
1962-72 CO1600,1700,1750,1800,1850 & F1800,1850, 300-159 TE419L TE419R Twin keyway king pin set with
1900,2000, series with FA105,FA208 & FA209 axles metal bushes - 1.433" x 8.50"
1965-75 500,1200D,1210,1300D,1310,1500,1510 with 300-118 310-195 310-196 King pin set with metal bushes
FA12 & FA28 axles 1.1095" x 6.25"
1965-77 1600,1700,1750,1800,1850 ACCO 1710A, 300-110 TE174L TE174R King pin set with metal bushes
1730A series with FA60 & FA69 axles 1.234" x 7.66"
1965-77 1600,1700,1750,1800,1850 ACCO 1710A, 300-120 TE174L TE174R King pin set with metal bushes
1730A series with FA68 & FA72 5000 & 5500lb axles 1.234" x 6.75"
1966-86 CO1600,1700,1750,1800,1850,F1800, 300-205 310-215 310-216 Twin keyway king pin set with
1850 with FA139,FA309 & FA329 axles metal bushes - 1.609" x 9.66"
1966-86 CO1600,1700,1750,1800,1850,F1800, 300-221 310-215 310-216 Single offset keyway king pin set
1850 with FA139,FA309 & FA329 axles 1.6085" x 9.61"
1966-71 C1820,CD1820,C1840,CD1840 300-110 TE174L TE174R King pin set with metal bushes
1.234" x 7.66"
1966-78 D400,DC400,DF400,D405,DCT405,CO4000, 300-188 310-215 310-216 Twin keyway king pin set with
COF4000,COT4000,CO4070A, Transtar with FA119 axle metal bushes - 1.6085" x 9.610"
1966-12/84 ACCO 1810A,1820,1830, 1830A, 1840,1950, F1910A,F1912A, KX244 ( x 2 = Twin Axle) King pin set with metal bushes
2050A,F2052A,F2152A with FA100 Australian axle ( + 1.732" Stepped Pin)

KING PIN LINK
SET
YEAR MODEL
1971-77 D1810,D1830,D1910,D1950 with FA65 axle 300-110 TE174L TE174R King pin set with metal bushes
1.234" x 7.66"
1972-77 ACCO 1710A,1730A with FA65,FA80,FA91 300-110 TE174L TE174R King pin set with metal bushes
FA98 & FA99 axles 7500lb 1.234" x 7.66"
1972-86 1900,1950,F1950,T1950,2000,D,DC,DCF400, 300-182 TE419L TE419R Twin keyway king pin set with
405,F1800,COF4070A,4200,1700,1750,1850,1900, metal bushes - 1.7935" x 9.12"
1950 with FA125,FA215,FA218,FA219,FD215,
& FD218 axles
1973-80 Scout II 2WD with FA3 axle 310-288 310-270 310-270 - has hole for steering damper
Scout II 4WD 100, 150 4WD 18 TPI thread 12 TPI thread
1973-80 Scout II 2WD with FA3 axle 310-288 310-270 310-270 - has hole for steering damper
Scout II 4WD 18 TPI thread 12 TPI thread
all to suit RABA axle FA339 & FA337 KX743
all to suit FA339 axle where triple keyway pin required KX339
1979-86 'T' line - T2650,T2670,TF2650,TF2670, TK2650, 300-223 310-215 310-216 310-317 King pin set with metal bushes
TK2670 & 'S' line with single keyway king pin one cotter 1.6085" x 9.66"
& Rockwell FF931 axles to chassis# L00672 Also KX663 with 3 cotters
will suit all
1979-86 'T' line - T2650,T2670,TF2650,TF2670, TK2650, 300-205 310-215 310-216 S-Line applications 310-317 Twin keyway king pin set with
TK2670 & 'S' line with double keyway king pin two cotter metal bushes - 1.6085" x 9.66"
from chassis# L00672
ISUZU
NOTE: MODELS KB20,KB25,KB26,KB27,KB38 - see CHEVROLET LUV
1961-84 ELF TL,TK,TL,BL KX220 TE607L TE607R King pin set 25 x 178mm
TE607R - 100mm 18x1.5 BLD 14.65mm
1971-on ELF KA,KUD,TL,TK 1.25-1.75ton KX221 TE607L TE607R King pin set 22 x 152mm
TE607R - 100mm 18x1.5 BLD 14.65mm
1973-on SPZ,TD,TP,DL,VP,SR,TMK 8-11ton KX222 TE607L TE607R King pin set 50 x 250mm
TE607R - 100mm 18x1.5 BLD 14.65mm
1980-on ELF TLD56,KT KX032 TE607L TE607R TE607R - 100mm 18x1.5 BLD 14.65mm

KING PIN LINK
SET
YEAR MODEL
1980-84 ELF TLD44 2500kg KX268 TE607L TE607R King pin set 25 x 178mm
TE607R - 100mm 18x1.5 BLD 14.65mm
1961-84 ELF 350, KS TE607L TE607R TE607R - 100mm 18x1.5 BLD 14.65mm
1994-on ELF NKR / NPR - with IFS BJ5322
1984-on FSR series 5ton KX222 TE608L TE608R King pin set 50 x 250mm
TE608R - 120mm 20x1.5 BLD 18.21mm
1984-on FTR series 7ton KX223 TE7221L TE7221R

(TE722L) (TE722R)
TFS 4WD - see GMH Rodeo 4WD
1978-84 JBR500, JCR500 - 6ton KX271 King pin set 45 x 244.5mm
1978-on FE211, FE334, FE339 KX534 King pin set 28 x 180mm
1977-84 KS21, KT25, KT26 3000kg, KS32 4000kg KX269 TE607L TE607R King pin set 30 x 178mm
TE607R - 100mm 18x1.5 BLD 14.65mm
1989-98 MU BJ203 BJ282 SX7660 TE210L TE210R TE210R TE210L TE210 - 72mm 14x1.5 Female BLD 16mm
(BJ805) (SX3251) (TE5281L) (TE5281R) (TE5281R) (TE5281L) BJ282 - 4 bolt mount BLD 20.7mm
idler pivot Female LHT Female RHT Female RHT Female LHT
BLD-16mm BHD-18mm BLD-16mm BHD-18mm
1984-on NKR, NPR 1.5-4ton KX231 TE683L TE683R
1984-89 NPS300 4x4 KX233 TE683L
1976-84 SBR450,SBR422 Forward Control 4600kg KX270 TE608L TE608R King pin set 35 x 199mm
SCR480 Forward Control 6000kg TE608R - 120mm 20x1.5 BLD 18.21mm
1973-85 SP, VP 8 & 12ton KX272 TE609L TE609R King pin set 50 x 252mm

KING PIN LINK
SET
YEAR MODEL
IVECO
1997-on Iveco RE7047 RE7047 - 347mm 16x1.5 (socket) 16x1.5 (tre)
JAGUAR
1955-69 2.4, 3.4, 3.8 MKII, 240, 340 BJ154 BJ155 RH-DL288R Ball joint repair kit - BJ155RK
LH-DL288L
1964-71 MK10 4.2, 420G BJ154 BJ155 Ball joint repair kit - BJ155RK
DAIMLER
1962-69 2.5ltr V8 BJ154 BJ155 Ball joint repair kit - BJ155RK
1969-79 Sovereign,Double Six (Series I, II) BJ154 BJ155 TE527R TE527R Ball joint repair kit - BJ155RK
1979-on Sovereign,Double Six (Series III - to BJ154 BJ155 TE527R TE527R Ball joint repair kit - BJ155RK
VIN 345389)
E TYPE
1961-71 E Type series I & II - 6cyl BJ154 BJ155 Ball joint repair kit - BJ155RK
1971-76 E Type series III - V12 BJ154 BJ155 TE527R TE527R Ball joint repair kit - BJ155RK
(1969-on) (1969-on)
XJ SERIES
1968-on XJ6, XJ12, XJS - to vin# 107864 BJ154 BJ155 TE527R TE527R RE7048 Ball joint repair kit - BJ155RK
imperial thread not HBE16851 RE7049 suits Rack Cast # HBE16851
1968-on XJ6, XJ12, XJS - from vin# 107865 BJ154 BJ155 TE1840 TE1840 RE7048 Ball joint repair kit - BJ155RK
metric thread not HBE16851 RE7048 - 284mm F21x1.5 (socket) 16x1.5 (tre)
1987-92 XJ40 RE7050 suits rack cast # BE24046, CBC4924

suits rack cast # ZF 7852-974-250
JEEP
CJ SERIES
1957-72 CJ5, CJ6 TE189R TE190L TE189R TE190L
1972-83 CJ5, CJ6, CJ7, CJ8 BJ490 BJ489 TE190L TE189R DS911 TE189R TEJ1 - suits inner/outer this model
(305-112) (10253) 23.94" to pitman arm
1982-86 CJ5, CJ6, CJ7, CJ8 BJ490 BJ489 TE190L TE189R DS1070 TE189R

KING PIN LINK
SET
YEAR MODEL
(305-112) (10253) 24.64" to pitman arm
CHEROKEE/WAGONEER/COMANCHE
1974-90 Cherokee Chief, J10,J20 BJ490 BJ489 Front
(305-112) (10253) Cherokee
1984-92
1974-90 Cherokee, Wagoneer, Comanche (1986-92) BJ490 BJ489 STB8143
(305-112) (10253)
1994-04 Cherokee XJ BJ3134 BJ3137 DL001 TE3094 TE001L TE3095 TR3945 Front APR001 - Adjustable Panhard Rod
(10458) (10459) 770mm 134mm 140mm 134mm 880mm STB8144 TE3194HD - serviceable end of APR001
inc. TE3094 & T3095 ends
9/01-8/04 Cherokee KJ - IFS RE6633 RE6633 - 295mm 24X1.25 (socket) 16x1.5 (tre)
p/steer
9/04-12/07 Cherokee KJ - IFS RE6685 RE6685 - 304mm 18x1.5 (socket) 16x1.5 (tre)
p/steer
2008-on Cherokee KK - IFS RE6655 RE6655 - 302mm 16x1.5 (socket) 16x1.5 (tre)
p/steer
CHEROKEE GRAND
1993-98 Grand Cherokee ZJ / ZG BJ3134 BJ3137 DL001 TE3094 TE001L TE3095 TR3945 Front APR001 - Adjustable Panhard Rod
inc. TE3094 & T3095 ends TE3094/95 - 134mm BLD 14.10mm 11/16"x18tpi
1999-04 Grand Cherokee WJ / WG
5/2005-09 Grand Cherokee WH / WK - IFS TE7801R TE7801L RE7800 Front RE7800 - 300mm 16x1.5 (socket) 16x1.5 (tre)
bends right bends left 300mm 16x1.5 probably won't wear
COMMANDO/JEEPSTER
1962-73 Commando, Jeepster 4WD - with BJ490 BJ489
steering gear in front of axle (305-112) (10253)
WRANGLER
1987-95 Wrangler YJ - not commercially exported to Australia
1996-06 Wrangler TJ BJ3134 BJ3137 DL001 TE3094 TE001L TE3095 TR3945 Front APR001 - Adjustable Panhard Rod
inc. TE3094 & T3095 ends Rear TE3094/95 - 134mm BLD 14.10mm 11/16"x18tpi
STB8832 STB8831/32 - will not suit for lifted vehicle
2007-10 Wrangler - JK APR002 - Adjustable Panhard Rod

(bush both ends)

KING PIN LINK
SET
YEAR MODEL
KENWORTH
1970-85 C500,K100,L700,W900 with FH901 300-210 310-228 310-229 346-265 Twin keyway king pin set with
& FL901 16000 & 18000lb Rockwell axle 27.31" (centre to centre) metal bushes - 1.999" x 11.04"
346-266
26.75" (centre to centre)
1971-80 C500,K100,L700,W900 with FL931 300-216 310-283 310-284 346-265 Twin keyway king pin set with
18000lb Rockwell axle 27.31" (centre to centre) metal bushes - 1.9999" x 11.21"
346-266
26.75" (centre to centre)
1971-80 C500,K100,L700,W900 with FF931 300-232 310-222 310-223 Twin keyway king pin set with
12000lb Rockwell axle metal bushes - 1.7935" x 10.392"
1980-on All models with Rockwell FF931 axle 300-232 Twin keyway king pin set with
(single & duel steer) metal bushes - 1.7935" x 10.392"
KIA
1986-on Besta BJ250 BJ251 TE979 TE979 BJ250 - 3 bolt mount BLD 17.85mm
7/99-12/06 Carnival RE7052 Rear Rack End - if 448mm tube - use RE7053 LHS
or STB7273 RE7052 - 260mm 18x1.5 (socket) 14x1.5 (tre)
RE7053 RE7053 - 325mm 18x1.5 (socket) 14x1.5 (tre)
8/06-on Carnival VQ 2.7L RE6652 RE6652 - 228mm 16x1.5 (socket) 16x1.5 (tre)
p/steer
2007-11 Cee'd TE2300L TE2300R
1990-on Ceres 2WD & 4WD TE6732L TE6732R RE7053 RE7053 - 325mm 18x1.5 (socket) 14x1.5 (tre)
k670, k672, k675, k676 LH Thread RH Thread
1995-on Credos TE888 TE888 RE1057 Front

RH-STB8173
LH-STB8172

KING PIN LINK
SET
YEAR MODEL
Rear
STB8052
1/06-on Grand Carnival VQ 3.8L TE5682L TE5682R RE6649 RE6649 - 228mm 16x1.5 (socket) 16x1.5 (tre)
220mm long - 16x1.5 RHT p/steer TE5682 - 220mm 16x1.5 female 13.95 BLD
6/94-2/98 Mentor FA22, FA24 TE2210 TE2210 RE1057
4/98-01 Mentor Shuma TE5242 TE5242 RE896L Front RE896L - 305mm 16x1.5 (socket) 14x1.5 (tre)
p/steer RH-STB7279
LH-STB7278
Rear
STB2751
8/02-4/06 Pregio RE6674 RE6674 - 290mm 18x1.5 (socket) 14x1.5 (tre)

p/steer
1990-on Pride K124, K125, K126, K127, K128 TE3624R TE3624R
2000-12/04 Rio - BC RE9789 RE9789 - 295mm 16x1.5 (socket) 12x1.25 (tre)

p/steer
8/05-on Rio - JB RE6653 RE6653 - 201mm 16x1.5 (socket) 14x1.5 (tre)

p/steer
1993-97 Sephia BJ340 BJ340 - 16mm spigot

(BJ2006)
1998-01 Sephia
2/03-on Sorrento RE6686 Front RE6686 - 186mm 18x1.5 (socket) 14x1.5 (tre)
p/steer STB7276
Rear
STB7277
2001-04 Spectra RE9789 Front RE9789 - 295mm 16x1.5 (socket) 12x1.25 (tre)
RH-STB7279
RH-STB7278
Rear
STB2751
Sportage - see KIA Commercial

KING PIN LINK
SET
YEAR MODEL
KIA - Commercial
all KIA - Asia Bus KX605
2000-3/04 Sportage - JE BJ700 BJ701 SX5257 TE1921L TE1921R TE1922L TE1922R TR66001 Front
or (SX2320) STB7282
BJ4389 Link Bar Pivot
inc. arm STB7281 Link Bar Pivot has plate end
LADA
1972-on 1200, 1300, 1500, 1600 BJ768 BJ4082 TE1118 TE1118 TE2488L TE2488R TR3011
M16x1 M16x1 (TE3003L) (TE3003R)
1986-on Samara BJ1111 TE2275 TE2274 TE4046 TE4046

2 bolt mount M18x1.5 LHT M18x1.5 LHT
1983-on Niva BJ768 BJ768 TE1118 TE1118 TE2276 TE2276 TR4011

3 bolt mount 'short' tie rod ends 'long' tie rod ends
M16x1 RHT M16x1 RHT M16x1 LHT M16x1 LHT
LANDROVER
LANDROVER CHASSIS IDENTIFICATION

The Landrover Chassis Identification number is located on the
Left, Rear section of the chassis above the shackle plate.
1948-62 Series 1 & 2 (up to Axle Suffix "D") TE79L TE79R TE79R TE79L TE79L front Drag Link ends only
86,88,107,109NC 25/35 cwt. 11/16x16tpi 11/16x16tpi 11/16x16tpi 11/16x16tpi TE79R rear
11/16x16tpi
1962-75 Series 1, 1A, 2, 2A (up to Axle Suffix "D") TE79L TE79R TE79R TE79L TE79L front Drag Link ends only
11/16x16tpi 11/16x16tpi 11/16x16tpi 11/16x16tpi TE79R rear
11/16x16tpi

KING PIN LINK
SET
YEAR MODEL
1975-on Series 3 (Axle Suffix "E") TE1569L TE1569R TE1569R TE1569L TE1569L front Drag Link ends only
TE1569R rear
3/1984-on Series 90, 100, 110 BJ223 BJ223 TE626R TE626R TE626R All tie rod ends are RH thread. Adjustment is
self level unit self level unit 11/16"x16 RHT 11/16"x16 RHT end only achieved through the ADJUSTING SHAFT until
or 1993-on when TE626L is used for adjustment.
BJ224 TE626L Check threads before ordering.
rear lower 11/16"x16 LHT
DEFENDER
1995-on Defender BJ224 TE626R TE626L Note - RH Outer Tie Rod End changes from imperial to
rear lower 11/16"x16 RHT 11/16"x16 LHT metric at some stage during production.
or or Check thread pitch before ordering.
TE6261L
18x1.5 LHT
DISCOVERY
1991-04 Discovery BJ224 TE626R TE626L TE626R TE626R Check Tie Rod End Threads - because
Series 1 & 2 rear lower 11/16"x16 RHT 11/16"x16 LHT 11/16"x16 RHT 11/16"x16 RHT tie rod is reversible.
Front Drag Link Rear Relay Rod
2004-09 Discovery
Series 3 (LR3)
FREELANDER
1998-on Freelander TE5292L TE5293R
RANGE ROVER
12/1970-on Range Rover BJ223 BJ223 TE626R TE626R TE626R SX181K All tie rod ends are RH thread. Adjustment is
self level unit self level unit 11/16"x16 RHT 11/16"x16 RHT end only pitman arm achieved through the ADJUSTING SHAFT until
or repair kit 1993-on when TE626L is used for adjustment.
BJ224 TE626L p/steer only Check threads before ordering.
rear lower 11/16"x16 LHT
SX181A
pitman arm
up to 1992
SX181B
pitman arm
1993-on
LEXUS
4/90-10/94 Lexus LS400 - UFC10 RH - BJ3762R TE3761L TE3761R RH-RE3520 RE3520 - 232mm 14x1.5 (socket) 14x1.5 (tre)
LH - BJ3762L LH-RE7054 RE7054 - 245mm 14x1.5 (socket) 14x1.5 (tre)

KING PIN LINK
SET
YEAR MODEL
4/90-10/94 Lexus LS400 - UFC20 RH-43330-59035 UFC20 ball joint is not as 'sharp' a (drop) bend as
LH-43340-59035 the UFC10 version (BJ3562R & L)
1992-10/96 Lexus ES300 104218 ES3306 ES3306 RE2930 Front RE2930 - 357mm 14x1.5 (socket) 15x1.5 (tre)
STB8006 STB8006 - 10mm studs
Rear
STB8105
10/96-9/01 Lexus ES300 RE2930 Front RE2930 - 357mm 14x1.5 (socket) 15x1.5 (tre)
RH-STB8198
LH-STB8197
Rear
STB8105
2002-02 Lexus ES300 Front

STB8200
Rear
STB8201
2003-on Lexus ES300 (MCV30) TE3753L TE3753R
2001-on Lexus IS300 Front

STB8026
1998-on Lexus LX470 BJ3841 BJ8620 TE3811L TE3811R RE3810 98-04

(UZJ100 Cruiser) or or or Front
TE3813L TE3813R RE3811 STB7856
98 Rear
STB7901
99-04
Rear
STB7857
1999-03 Lexus RX300 BJ2932 TE2931 TE2931 Front

RH-STB8198
LH-STB8197
Rear
STB8105
2004-on Lexus RX330 RH-BJ3752R TE3903 TE3903 RE3901 Front

LH-BJ3752L p/steer STB8200
Rear
STB8201

KING PIN LINK
SET
YEAR MODEL
LEYLAND (inc. Austin, Mini, Morris, M.G.)

AUSTIN
1958-71 Healy Sprite SX47 SX48 TE126R TE126R
NLA NLA 5/8"x18 UNF RHT Female
1962-74 Austin 100,1100S,1300 MkI,II,III TE179R TE179R

1/2"x20 UNF RHT Female
1964-77 Austin 1800, 2200 MkI & Mk11, BJ78 BJ78 TE125R TE125R Knuckle joint (Front & Rear) - BJ79
Kimberly, Tasman X6 NLA NLA 9/16"x18 UNF RHT Female
1962-66 Freeway MKI, MKII SX39 SX19 TE126R TE126R

NLA NLA 5/8"x18 UNF RHT Female
1967-72 3 litre TE125R TE125R
1973-77 Allegro 1100,1300,1500,1750 BJ37 BJ38 TE179R TE179R Knuckle joint (Front & Rear) - BJ82
repair kit repair kit 1/2"x20 UNF RHT Female BJ167K - upper & lower conbined repair kit
U/L RK combined - BJ167K
1959-10/80 Mini Range 850/1100, Minor, Clubman BJ29 BJ29 TE179R TE179R BJ29 - one wheel kit to repair both upper
series, Moke, Cooper & Cooper 'S' 1/2"x20 UNF RHT Female & lower joints
Knuckle Joint (Front & Rear) - BJ33
MINI
1959-10/80 Mini - all models BJ29 BJ29 TE179R TE179R BJ29 - one wheel kit to repair both upper
1/2"x20 UNF RHT Female & lower joints
Knuckle Joint (Front & Rear) - BJ33
MORRIS
1954-59 Oxford, Traveller, Cowley, Isis TE126R TE126R
1958-62 Major 1500 Series I,II TE126R TE126R
1962-64 Major Elite Mk III TE126R TE126R
1959-71 Minor 1000 Series III, chassis# 566384 on (RHD) TE126R TE126R
& chassis# 567389 on (LHD) series V, 1000 5/8"x18 UNF RHT Female
utility van chassis# 65376 on

KING PIN LINK
SET
YEAR MODEL
6/62-4/72 Morris 1100, 1300 BJ37 BJ38 TE179R TE179R Knuckle joint (Front & Rear) - BJ82
repair kit repair kit 1/2"x20 UNF RHT Female BJ167K - upper & lower conbined repair kit
U/L RK combined - BJ167K
1969-77 Morris Nomad, Marina, Maxi 1500,1750 TE179R TE179R

1/2"x20 UNF RHT Female
M.G.
1956-72 Magnette MGA 1500,1600 TE126R TE126R
1957-59 Magnette ZB chassis# 25586 on (RHD) & TE126R TE126R

chassis# 26102 on (LHD) 5/8"x18 UNF RHT Female
1956-62 Midget 948 TE126R TE126R
1962-72 Midget 1098, 1275 KX624 TE126R TE126R
1972-74 Midget 1098, 1275 KX624 TE157L TE157L
1974-on Midget 1098, 1275 TE1572 TE1572
1963-72 MGB, MGB-GT, MGC, MGC-GT KX650 TE126R TE126R

NLA 5/8"x18 UNF RHT Female
1972-80 MGB, MGB-GT, MGC, MGC-GT KX650 TE195R TE195R

NLA 9/16"x18 UNF RHT Female
1997-on MGF
2000-on MG 'TD2000' RE868 RE868 - 158mm 14x1.5 (socket) 14x1.5 (tre)
P76
all Leyland P76 TE4893R TE4893R
LOTUS - see PROTON (Satria)
MACK
1969-91 Value Liner, Super Liner, Cruise Liner, 300-231 310-228 310-229 Tapered king pin set with
DM400,DM600,DM606S,DM607S,MB400,MB600, fine thread fine thread metal bushes - 1.625" x 7.470"
MR400,MR600,R400,R600,R685R,R686ST,R700, 1 1/4" x 12 TPI shank
RD600,RD700,WL700L&S,U600,F700 with FA(W)536

FA(W)537 10000 & 12000lb axles & fine or coarse TE419L TE419R

KING PIN LINK
SET
YEAR MODEL
thread tie rod ends. coarse thread coarse thread
1 1/8" x 12 TPI shank
1975-94 R600L,R600LS,R700L,RWL700S,RWS700S,WL700L, 300-232 310-222 310-223 Twin keyway king pin set with
WL700LS,WS700L,WS700LS with FF931 12000lb axles metal bushes - 1.793" x 10.390"
1975-94 R600L,R600LS,R700L,RWL700S,RWS700S,WL700L, 300-216 310-283 310-284 Twin keyway king pin set with
WL700LS,WS700L,WS700LS with FF931 18000lb axles metal bushes - 1.999" x 11.210"
MAZDA
800/1000
1964-68 800 Familia BS,FS,MS,SS,SSA RH-BJ95 RH-BJ97 TE192L TE192L TE191R TE191R
1000 Familia BPAV,MP,SP LH-BJ96 LH-BJ98
1000 series Ute - see TK series in MAZDA-Commercial
1200/1300
1968-70 1200 Familia STA,SPB,BPBV,BTAV,MOIA BJ83 TE447L TE447L TE448R TE448R
NLA NLA NLA NLA
1970-72 1300 Familia Presto STB,FA3T BJ83 TE479L TE479L TE480R TE480R SX5224 SX5224 - 28 splines and 1 master spline
RH Thread RH Thread TE480R - 108mm 14x1.5 BLD 10.71mm
108mm BLD 10.71mm
1972-10/75 1300 Familia Presto FA3T BJ83 TE479L TE479L TE505R TE505R SX5224 SX5224 - 28 splines and 1 master spline
156mm BLD 10.71mm
10/75-1977 1300 Familia Presto FA3T BJ83 SX1234 TE508L TE508L TE515R TE515R SX5226 SX5226 - 29 splines and 1 master spline
(TE509R) (TE509R) SX5226 - very similar to SX5247
121/121L - 2 door coupe

1975-77 121, 121L - CD2 models 1.8lt BJ2211 SX1233 TE512L TE512L TE513R TE513R SX5243 BJ2211 - 41mm diameter
(BJ247) SX5243 - 38 splines & 2 master splines
1977-81 121,121L - CD3&5 models 1.8/2.0lt BJ305 SX1233 TE512L TE512L TE513R TE513R SX5243 BJ305 - 43mm diameter
(BJ248) SX5243 - 38 splines & 2 master splines
121 - hatch
1987-92 121 hatch DA 1.3lt - manual steer BJ330 TE3624R TE3624R RE6445
(BJ180)
ball joint only

KING PIN LINK
SET
YEAR MODEL
1987-92 121 hatch DA 1.3lt - power steer BJ330 TE3624R TE3624R RH-RE893R RE894L - 324mm 17x1 (socket) 12x1.25 (tre)
(BJ180) LH-RE894L RE893R - 325mm 17x1.0 (socket) 12x1.25 (tre)
ball joint only
1992-12/93 121 DB BJ415 TE7156 TE7156 RE9789 NOTE - in some applications BJ415 can be
(BJ4310) power too short. Check length. If too short use BJ416
inc. Arm or (BJ416 is 10mm longer than BJ415)
manual RE7010 - 295mm 17x1.0 (socket) 12x1.25 (tre)
1/94-1/96 121 DB BJ416 TE7156 TE7156 RE7010 NOTE - in some applications BJ416 can be
(BJ4300) manual too long. Check length. If too long use BJ415
inc. Arm (BJ415 is 10mm shorter than BJ416)
1998-on 121 DW RE9789 RE9789 - 295mm 16x1.5 (socket) 12x1.25 (tre)

power
1500/1800
1966-77 B1500 (BUD) B1600 (BNA,BNB) BJ99 BJ100 TE192L TE192L TE191R TE191R
1965-68 1500 sedan - SUA, Luce BJ99 BJ100 TE192L TE192L TE191R TE191R TR421 Male thread tie rod ends
male male male male
1968-73 1500, 1800 sedan - SUA, SVA, Luce BJ99 BJ100 TE443L TE443L TE445R TE445R TR421 Female thread tie rod ends
female female female female
323 series (inc. Astina)

1977-81 323 FA4, FA5 - rear wheel drive BJ149 SX1235 TE514L TE514L TE515R TE515R SX5229 SX5229 - 29 splines and 1 master spline
TS,TV,US,UV (SX5235)
1980-85 323 BD1031, BD1051, BD1052 - front wheel BJ180 or TE562L TE562R RE842 RE842 - 305mm 17x1 (socket) 12x1.25 (tre)
drive - manual steer male end BJ180 - 12mm ball bolt clip groove
RH-ARM180R manual
(BJ180ARMRH)
LH-ARM180L
(BJ180ARMLH)
inc. Arm
1980-85 323 BD1031, BD1051, BD1052 - front wheel BJ180 or TE562L TE562R RE843 RE842 - 305mm 17x1 (socket) 12x1.25 (tre)
drive - power steer male end BJ180 - 12mm ball bolt clip groove
RH-ARM180R power

KING PIN LINK
SET
YEAR MODEL
(BJ180ARMRH)
LH-ARM180L
(BJ180ARMLH)
inc. Arm
1985-90 323 BF, BW, BV - manual steer BJ330 or TE3624R TE3624R RE892 RE892 - 325mm 14x1.5 (socket) 12x1.25 (tre)
(TE733) (TE733)
RH-BJ465R
LH-BJ466L BLD 12.8mm BLD 12.8mm
inc. Arm
1985-90 323 BF, BW, BV - power steer BJ330 or TE3624R TE3624R RH-RE893R Front RE893R - 325mm 17x1.0 (socket) 12x1.25 (tre)
(TE733) (TE733) LH-RE894L STB7103 RE894L - 324mm 17x1.0 (socket) 12x1.25 (tre)
RH-BJ465R TE840 has larger taper than TE3624R
LH-BJ466L BLD 12.8mm BLD 12.8mm
inc. Arm
1989-94 323 BG inc. Astina BJ340 TE840 TE840 RE1005 RE1005 - 342mm 16x1.0 (socket) 12x1.25 (tre)
(BJ2006) (TE969) (TE969) or RE6914 - 350mm 14x1.5 (socket) 12x1.25 (tre)
(16mm spigot) RE6914 TE840 has larger taper than TE3624R
BLD 13.2mm BLD 13.2mm M14 rack BJ2006 - spigot diam 16mm with 13mm slot
or BJ1572 - spigot diam 18mm with 14mm slot
BJ418
(BJ1572)
(18mm spigot)
1994-99 Astina BA BJ418 TE840 TE840 RE6914 Front RE6914 - 350mm 14x1.5 (socket) 12x1.25 (tre)
(BJ1572) (TE969) (TE969) 14x1.5 socket thread RH-STB8049 RE7027 - 353mm 16x1.0 (socket) 12x1.25 (tre)
(18mm spigot) or LH-STB8051
BLD 13.2mm BLD 13.2mm RE7027 Rear

16x1.0 socket thread STB8052
1994-9/98 Protégé BH BJ418 TE840 TE840 RE1005 Front NOTE - RE1006 was previously listed for Alfa
(BJ1572) (TE969) (TE969) RH-STB8049 application. Check if ordered by part number.
(18mm spigot) LH-STB8051
BLD 13.2mm BLD 13.2mm Rear

STB8052
10/98-6/02 Protégé BJMW RE1005 1999-00 NOTE - RE1006 was previously listed for Alfa
Front application. Check if ordered by part number.
STB8134
Rear
STB8135

KING PIN LINK
SET
YEAR MODEL
2001-03
Front
STB8170
Rear
STB8171
626 series (inc. MX6)

1970-74 626 SU2A, SNA BJ83 TE479L TE479L TE480R TE480R TE480R - 108mm 14x1.5 BLD 10.71mm
RH Thread RH Thread
1974-75 626 SNA, SV2A BJ83 TE510L TE510L TE482R TE482R 10mm bolt thread
95mm BLD 12.85mm 114mm BLD 12.6mm
1975-77 626 SNA BJ99 BJ307 TE511L TE511L TE513R TE513R 12mm bolt thread
(BJ249)
128mm BLD 13.7mm
9/78-1980 626 CB2 - rear wheel drive BJ149 SX1236 TE514L TE514L TE568R TE568R TE568R length 185mm
1980-10/82 626 CB2 - rear wheel drive BJ149 SX1236 TE514L TE514L TE515R TE515R TE515R length 160mm
9/82-2/87 626 GC - front wheel drive - manual steer BJ306 TE809R TE809R RH-RE844R RE844R - 270mm 16x1.0 (socket) 14x1.5 (tre)
NOT four wheel steering ball joint only (TE678) (TE678) LH-RE844L RE844L - 300mm 16x1.0 (socket) 14x1.5 (tre)
RH-BJ467R 93mm BLD 13.65mm TE809R - 93mm 14x1.5 female BLD 13.65mm
LH-BJ468L
inc. Arm
9/82-2/87 626 GC - front wheel drive - power steer BJ306 TE809R TE809R RH-RE895R RE895R - 280mm 16x1.5 (socket) 14x1.5 (tre)
NOT four wheel steering ball joint only (TE678) (TE678) LH-RE896L RE896L - 305mm 16x1.5 (socket) 14x1.5 (tre)
RH-BJ467R 93mm BLD 13.65mm TE809R - 93mm 14x1.5 female BLD 13.65mm
LH-BJ468L
inc. Arm
2/87-12/91 626 GD - front wheel drive - power steer BJ306 TE809R TE809R RE898 Front RE898 - 307mm 18x1.5 (socket) 14x1.5 (tre)
ball joint only (TE678) (TE678) power STB8104 TE809R - 93mm 14x1.5 female BLD 13.65mm
RH-BJ467R 93mm BLD 13.65mm

KING PIN LINK
SET
YEAR MODEL
LH-BJ468L
inc. Arm
2/87-10/91 626 GDEA 2.2lt - four wheel steering BJ306 TE809R TE809R RE898 Front RE898 - 307mm 18x1.5 (socket) 14x1.5 (tre)
ball joint only (TE678) (TE678) STB8104 TE809R - 93mm 14x1.5 female BLD 13.65mm
RH-BJ467R (front) (front)
LH-BJ468L TE717R TE717R
inc. Arm (rear) (rear)
10/91-on 626 GE/EE - two wheel steering RH-BJ350R TE3197 TE3197 RH-RE917R 10/91-95 RE917R - 330mm 18x1.5 (socket) 14x1.5 (tre)
(BJ4152) (TE970) (TE970) (RE982) Front RE918L - 330mm 18x1.5 (socket) 14x1.5 (tre)
LH-BJ350L LH-RE918L RH-STB8049
(BJ4153) (RE983) LH-STB8051
inc. Arm Rear

STB8050
1995-97
RH-STB7416
LH-STB7415
Rear
STB7417
1999-on
Rear
STB8052
all 626 GV,GW,GR,GM,GN RE898 RE898 - 307mm 18x1.5 (socket) 14x1.5 (tre)
808 / SAVANNA
71-10/75 808 STC, SN3A, SNA4A Savanna BJ126 SX1235 TE481L TE481L TE482R TE482R SX5229 ** Tie rod ends with 10mm ball joint
(STC, SU4A, SN3A, SN4A, STCV, SU4AV, SN3AV) inc. VAN press in BJ126 - 41mm diameter
10/75-77 808 STC, SNA Savanna BJ126 SX1235 TE512L TE512L TE513R TE513R ** Check Pitman Arm Measurements SX1290 ** Tie Rod Ends with 12mm ball bolt
(STC, STCV, SN4A, SN3AV) inc. VAN press in prior to ordering BJ126 - 41mm diameter
1977-78 808 STC, SNA Savanna BJ307 SX1235 TE512L TE512L TE513R TE513R SX5229 - 28 splines & 1 master spline SX1290 ** Tie Rod Ends with 12mm ball bolt
(STC, STCV, SN4A, SN3AV) inc. VAN (BJ249) 22-23mm spline diameter BJ249 - 43mm diameter
SX1290 - 36 splines & 1 master spline

78-10/80 Savanna RX7,SA22C (REIZA) Sports Coupe BJ149 TE508L TE508L TE515R TE515R 23-24.3mm spline diameter
929 series
1966-73 929/929L 1500/1800 BJ99 BJ100 TE443L TE443L TE445R TE445R
female female female female
10/72-74 929, 929L LA2VS BJ126 SX1233 TE481L TE481L TE483R TE483R SX5242 Tie rod end bolt 10mm

KING PIN LINK
SET
YEAR MODEL
with 10mm ball pin tie rod press in idler arm (to 10/75) (to 10/75) (to 10/75) (to 10/75) NLA
NLA NLA
1974-77 929, 929L LA2, LA3 BJ126 SX1233 TE512L TE512L TE513R TE513R SX5243 Tie rod end bolt 12mm.
with 12mm ball pin tie rod press in idler arm (10/75-on) (10/75-on) (10/75-on) (10/75-on) BJ126 press in type with 41mm dia.
SX5243 - 38 splines & 2 master splines
1975-77 929, 929L LA2, LA3 BJ2211 SX1233 TE512L TE512L TE513R TE513R SX5243 BJ247 screw in type with 41mm dia.
with 12mm ball pin tie rod (BJ247) idler arm SX5243 - 38 splines & 2 master splines
1977-78 929, 929L LA2, LA3 BJ307 SX1233 TE512L TE512L TE513R TE513R SX5243 BJ249 press in type with 43mm dia.
with 12mm ball pin tie rod (BJ249) idler arm SX5243 - 38 splines & 2 master splines
press in
1977-8/81 929, 929L, LA4, LA5, HBSHE wagon BJ305 SX1233 TE512L TE512L TE513R TE513R BJ248 screw in type with 43mm dia.
with 12mm ball pin tie rod (BJ248) idler arm
LA4MS Sedan & Wagon
8/81-7/86 929, 929L HB - manual steer RH-BJ1105R TE809R TE809R RE899 RE899 - 235mm F14x1.5 (socket) 14x1.5 (tre)
LH-BJ1106L (TE678) (TE678) TE809R - 93mm 14x1.5 female BLD 13.65mm
inc. Arm
8/81-7/86 929, 929L HB - power steer RH-BJ1105R TE809R TE809R RE900 RE900 - 237mm 16x1.5 (socket) 14x1.5 (tre)
LH-BJ1106L (TE678) (TE678) TE809R - 93mm 14x1.5 female BLD 13.65mm
inc. Arm
7/86-91 929, 929L HC - V6 sedan & hardtop RH-BJ4154R TE809R TE809R RH-RE1490 TE809R - 93mm 14x1.5 female BLD 13.65mm
LH-BJ4155L (TE678) (TE678) LH-RE1491
inc. Arm
7/91-3/96 929 HD - 4WS RH-RE7064 Front RE7064 - 215mm 18x1.5 (socket) 14x1.5 (tre)
LH-RE7063 STB8053 RE7063 - 220mm 18x1.5 (socket) 14x1.5 (tre)
or
RE2240
(Rear)
RE1019 - can use RE1019 for REAR RACK if you change tie rod ends with TE438R
ASTINA - see 323 series
BONGO - see MAZDA Commercial - E series and F series

KING PIN LINK
SET
YEAR MODEL
CAPELLA
1970-73 Capella 1600 SNA, SN2A BJ83 TE479L TE479L TE480R TE480R SX5224 TE480R - 108mm 14x1.5 BLD 10.71mm
RH Thread RH Thread SX5224 - 28 splines and 1 master spline
34mm diam 108mm BLD 10.71mm
74-10/75 Capella 1600 SNA, SV2A BJ83 TE510L TE510L TE482R TE482R SX5247 Tie rod ends with 10mm ball bolt
with 10mm ball pin tie rod & top of taper dia. - .502"
95mm BLD 12.85mm 114mm BLD 12.6mm SX5247 - 29 splines and 1 master spline
SX5247 - small kink in arm
10/75-78 Capella 1600 SNA, CB1VS BJ307 TE511L TE511L TE513R TE513R SX5247 Tie rod end bolt dia. - 12mm
with 12mm ball pin tie rod (BJ249) SX5247 - 29 splines and 1 master spline
128mm BLD 13.7mm SX5247 - small kink in arm
1978-80 Capella 626 CB2NS,CB2VS,CB2MS BJ149 TE514L TE514L TE568R TE568R
1980-83 Capella BJ149 TE514L TE514L TE515R TE515R
CX7
2007-on CX7 - ER3P BJ1772 TE1771L TE1771R RE1810
EUNOS
1990-97 Eunos BJ4550 TE3228 TE3228 1992-96
Front
STB8056
or
STB4209
105mm
Rear
STB4209
250mm

KING PIN LINK
SET
YEAR MODEL
Mazda 2
1996-02 Mazda 2 - DW
10/02-5/05 Mazda 2 - DY RE6675 RE6675 - 225mm 16x1.0 (socket) 14x1.5 (tre)

p/steer
2007-on Mazda 2 - DE TE6513L TE6513R RE6513 RE6513 - 230mm 14X1.5 (socket) 14x1.5 (tre)
Mazda 3
1/04-on Mazda 3 - 2.0L BJ1652 TE1651L TE1651R RE6646 Rear RE6646 - 326mm 14X1.5 (socket) 16x2.0 (tre)
p/steer STB8836
1/04-on Mazda 3 - 2.3L BJ1652 TE1651L TE1651R RE6635 Rear RE6635 - 306mm 14X1.5 (socket) 17x1.5 (tre)
p/steer STB8836
Mazda 6
8/02-10/07 Mazda 6 - GG,GY BJ1631 RH-BJ31062 TE2280 TE2290 RE6446 Front RE6446 - 200mm 18X1.5 (socket) 14x1.5 (tre)
LH-BJ31063 (RE1630) RH-STB7420
LH-STB7419
Rear
STB7421
MIATA
1990-97 Miata BJ4550 TE3228 TE3228 Front/Rear
STB8058
1999-02 Miata BJ4550 TE3228 TE3228 Rear

RH-STB8049
LH-STB8051
MX series
11/89-97 MX5 RE7065 F&R
power STB8058
RE7066
manual
11/86-9/87 MX6 GC - manual steer BJ306 TE809R RH-RE844R RE844R - 270mm 16x1.0 (socket) 14x1.5 (tre)
(TE678) LH-RE844L RE844L - 300mm 16x1.0 (socket) 14x1.5 (tre)

KING PIN LINK
SET
YEAR MODEL
11/86-9/87 MX6 GC - power steer BJ306 TE809R RH-RE895R RE895R - 280mm 16x1.5 (socket) 14x1.5 (tre)
(TE678) LH-RE896L RE896L - 305mm 16x1.5 (socket) 14x1.5 (tre)
TE809R - 93mm 14x1.5 female BLD 13.65mm
11/86-10/91 MX6 GC GD 2.2lt Turbo - manual steer BJ306 TE809R TE809R RE898 TE809R - 93mm 14x1.5 female BLD 13.65mm
11/86-10/91 MX6 GC GD 2.2lt Turbo - power steer BJ306 TE809R TE809R RE898 TE809R - 93mm 14x1.5 female BLD 13.65mm
10/87-12/91 MX6 GD - 4WS Turbo BJ306 TE809R TE809R RH-RE898 RE898 - 307mm 18x1.5 (socket) 14x1.5 (tre)
(TE678) (TE678) LH-RE7067 RE7067 - 315mm 18x1.5 (socket) 14x1.5 (tre)
front RE844R - 270mm 16x1.0 (socket) 14x1.5 (tre)
RH-RE844R RE844L - 300mm 16x1.0 (socket) 14x1.5 (tre)
LH-RE844L TE809R - 93mm 14x1.5 female BLD 13.65mm
rear
11/91-on MX6 GE/EE - two wheel steering RH-BJ350R TE3197 TE3197 RH-RE917R 1993-97 RE917R - 330mm 18x1.5 (socket) 14x1.5 (tre)
(BJ4152) (TE970) (TE970) (RE982) Front RE918L - 330mm 18x1.5 (socket) 14x1.5 (tre)
LH-BJ350L LH-RE918L RH-STB8049
(BJ4153) (RE983) LH-STB8051
inc. Arm Rear

STB8050
11/91-on MX6 GE/EE - 4WS RH-BJ350R TE3197 TE3197 RH-RE7018 1993-97

(BJ4152) (TE970) (TE970) (RE984) Front
LH-BJ350L LH-RE7017 RH-STB8049
(BJ4153) LH-STB8051
inc. Arm Rear

STB8050
PERSONA
2/90-on Persona MA8P TE809R TE809R TE809R - 93mm 14x1.5 female BLD 13.65mm
(TE678) (TE678)
2/90-on Persona MAEP TE809R TE809R TE809R - 93mm 14x1.5 female BLD 13.65mm
(TE678) (TE678)
PROTEGE - see 323 series
ROTARY SERIES
6/69-12/71 Rotary R100, RX2 BJ83 TE447L TE447L TE448R TE448R
NLA NLA NLA NLA
1970-74 Rotary RX2 sedan & coupe BJ83 TE479L TE479L TE480R TE480R SX5224 TE480R - 108mm 14x1.5 BLD 10.71mm
RH Thread RH Thread SX5224 - 28 splines and 1 master spline
34mm diam 108mm BLD 10.71mm

KING PIN LINK
SET
YEAR MODEL
1974-75 Rotary RX2 sedan & coupe BJ83 TE510L TE510L TE482R TE482R SX5247 SX5247 - 29 splines and 1 master spline
CB1 - VS,2C,2S SX5247 - small kink in arm
1975-77 Rotary RX2 sedan & coupe BJ307 TE511L TE511L TE513R TE513R SX5247 SX5247 - 29 splines and 1 master spline
CB1 - VS, 2S (BJ249) SX5247 - small kink in arm
1972-6/75 Rotary RX3 sedan & coupe BJ126 SX1235 TE481L TE481L TE482R TE482R SX5229 Tie rod end bolt dia. - 10mm
press in
7/75-77 Rotary RX3 sedan & coupe BJ126 SX1235 TE512L TE512L TE513R TE513R SX5229 Tie rod end bolt dia. - 12mm
press in
10/72-10/75 Rotary RX4 sedan & coupe BJ126 SX1233 TE481L TE481L TE483R TE483R SX5242
press in idler arm NLA NLA NLA
10/75-77 Rotary RX4 sedan & coupe BJ126 SX1233 TE512L TE512L TE513R TE513R SX5243 SX5243 - 38 splines & 2 master splines
press in idler arm
1977-79 Rotary RX4 sedan & coupe BJ307 SX1233 TE512L TE512L TE513R TE513R SX5243 BJ249 press in type with 43mm dia.
(BJ249) idler arm SX5243 - 38 splines & 2 master splines
1975-77 Rotary RX5 sedan & coupe BJ2211 SX1233 TE512L TE512L TE513R TE513R SX5243 BJ247 screw in type with 41mm dia.
1977-79 Rotary RX5 sedan & coupe BJ305 SX1233 TE512L TE512L TE513R TE513R SX5243 BJ248 screw in type with 43mm dia.
3/78-85 Rotary RX7 SA22C series 2 door coupe BJ149 TE508L TE508L TE515R TE515R SX5243 SX5243 - 38 splines & 2 master splines
2/86-3/92 Rotary RX7 Series 4 & 5 (FC1031 & FC1032) BJ485 TE3198 TE3198 RE3011 RE3011 - 285mm 14x1.5 (socket) 12x1.25 (tre)
(TE3666R) (TE3666R) (RE7070)
1993-on Rotary RX7 FD3 series 2 door twin turbo coupe TE840 TE840 RE1011 1993-95
(TE969) (TE969) Front
RH-STB8059
BLD 13.2mm BLD 13.2mm LH-STB8057
MAZDA - Commercial
B Series - 2WD
1966-11/80 B1500, B1600, B1800 Utility BJ99 BJ100 SX1149 TE192L TE192L TE191R TE191R TR591 SX1149 - 2 bolt mounting

KING PIN LINK
SET
YEAR MODEL
BUD61,BNA61,BTA67,PE2N6,PE2V6 LH Thread LH Thread RH Thread RH Thread NLA
11/80-85 B1600, B1800, B2000, B2200 Utility BJ194 BJ195 SX1150 TE590L TE590L TE589R TE589R SX5255 SX1150 - 3 bolt mounting
PE2N7,PE2V7,UDX021,UDY021 4 bolt mount (TE3601L) (TE3601L) (TE3609R) (TE3609R) BJ195 - 105.7mm b/w bottom bolt holes - no thread
1985-87 B2000, B2200 SGH Utility BJ3956 BJ3954 SX4200 TE590L TE590L TE589R TE589R SX5200 SX5200 - 38 splines & 1 master - top spline diam. 24.7mm
(BJ2003) (BJ2004) (TE3601L) (TE3601L) (TE3609R) (TE3609R) Check Pitman Arm Diameter & Spline Count b4 ordering
BJ3954 - 65.95mm b/w bottom threaded bolt holes

threaded threaded
1987-1/99 B2200 2WD Utility BJ3956 BJ3954 SX4201 TE590L TE590L TE3613R TE3613R SX5202 SX5202 - 38 splines & 1 master - top spline diam. 24.7mm
(BJ2003) (BJ2004) (TE3601L) (TE3601L) Check Pitman Arm Diameter & Spline Count b4 ordering
BJ3954 - 65.95mm b/w bottom threaded bolt holes

threaded threaded
2/99-10/02 B2200 (UH71) 2WD BJ3956 BJ3954 SX1620 TE590L TE590L TE3613R TE3613R SX2620
3 bolt mount 4 bolt mount 14.4mm BLD (TE3601L) (TE3601L) 14.3mm BLD
B Series - 4WD
1987-on B2600 4WD Utility (Bravo) SGHC BJ3956 BJ3955 SX4201 TE3667L TE3667L TE3613R TE3613R SX5202 SX5202 - 38 splines & 1 master - top spline diam. 24.7mm
(BJ2003) (BJ2005) Check Pitman Arm Diameter & Spline Count b4 ordering
idler arm LH Thread LH Thread BJ3955 - 94mm b/w bottom bolt holes - no thread
threaded not threaded
11/89-98 B2500, B2600 4WD Utility (UF66M) (Bravo) BJ3956 BJ3955 SX4201 TE3667L TE3667L TE3613R TE3613R TR2263 SX5203 SX5203 - 42 splines & 1 master - top spline diam. 26.5mm
(BJ2003) (BJ2005) (SX1303) (5/96-1/99) (SX1531) Check Pitman Arm Diameter & Spline Count b4 ordering
13.25mm BLD LH Thread LH Thread spline ID 26.5mm BJ3955 - 94mm b/w bottom bolt holes - no thread
NOTE - SX4201 = 13.25mm BLD threaded not threaded
98-11/02 B2600 4WD (UH71) B2600 (Bravo) BJ3956 BJ3955 SX1620 TE3667L TE3667L TE3613R TE3613R TR2261 SX2620 BJ3955 - 94mm b/w bottom bolt holes - no thread
(BJ2003) (BJ2005) 14.4mm BLD (2/99-1/05) TE3667L - 85mm 14x1.5 Female BLD 13.95mm
(BJ807) (BJ809) LH Thread LH Thread bend to avoid drag link TR2262 spline ID 30.8mm SX2620 - spline 30.8mm ID BLD 14.3mm
(2/99-02) BLD - 14.3mm NOTE - there are Japanese & Thai built Couriers in the Aust. & NZ
3 bolt mount 4 bolt mount or markets - please ascertain the dmiensions of the components
threaded not threaded SX2621 to ensure you are ordering exactly what is required.
NOTE - SX1620 = 14.4mm BLD BLD - 15.5mm
11/02-06 B2600 4WD (UH71) B2600 (Bravo) BJ3956 BJ3955 SX1620 TE3667L TE3667L TE3613R TE3613R SX2621 BJ3955 - 94mm b/w bottom bolt holes - no thread
(BJ2003) (BJ2005) TE3667L - 85mm 14x1.5 Female BLD 13.95mm
LH Thread LH Thread SX2621 - 15.5mm BLD

KING PIN LINK
SET
YEAR MODEL
Bongo - see E series and F Series
BT-50
2006-on BT-50 - B2500 & B3000 (2WD) UNY BJ3956 BJ1722 SX1622 TE1721 TE1721 TE3613R TE3613R SX2620
UH71 & UR56 BLD - 14.3mm
bend to avoid drag link or

SX2621
BLD - 15.5mm
2006-on BT-50 - B3000 (4WD) UNY BJ3956 BJ3455 SX1622 TE3667L TE3667L TE3613R TE3613R SX2620 TE3667L - 85mm 14x1.5 Female BLD 13.95mm
UR61 (BJ2003) (BLD 19.3mm) BLD - 14.3mm SX1622 - same as SX1620 but with 12mm bolt holes
4 bolt mount LH Thread LH Thread bend to avoid drag link or

3 bolt mount SX2621
BLD - 15.5mm
E Series (Bongo - also see F series Bongo below)

1968-79 E1300 pickup truck BJ196 BJ197 TE443L TE443L TE445R TE445R
BTA65,FA2T55,BPB65,FA2T65 female female female female
1971-77 E2000, E2500, E2700 EVB,EXB,EXC KX267 TE605L TE605R King pin set - 1.105" x 6.700"
van & truck 2000 & 3000kg LH Thread RH Thread
10/77-81 E2000, E2500, E3000 EVB,EXR,TA3 KX267 TE606L TE606R King pin set - 1.105" x 6.700"
LH Thread RH Thread
1976-on E3700 KX605 King pin set - 30mm x 175mm
1977-7/80 E1300, E1400, E1600 BJ198 BJ199 SX1300 TE592L TE592L TE593R TE593R TE593R SX5300 Ball joints have 4 mounting holes
4 bolt mount 4 bolt mount front
TE592L
rear
7/80-4/83 E1400, E1600, E2200 BJ198 BJ199 SX1300 TE974 TE974 TE973 TE973 Ball joints have 4 mounting holes
1977-7/80 E1600 Bongo Panel Van (1000kg), E1600 BJ198 BJ199 TE592L TE593R Ball joints have 4 mounting holes
Pick Up Truck (1000kg), BA2T8,BA2UB, 4 bolt mount 4 bolt mount

KING PIN LINK
SET
YEAR MODEL
SA2N8/9,BA2T8V,BA2N9V,BA2S8H,
BA2S9H,BA2V9H
8/80-4/83 E1600 Bongo Panel Van (1000kg), E1600 BJ198 BJ199 Ball joints have 4 mounting holes
Pick Up Truck (1000kg), BA2T8,BA2UB, 4 bolt mount 4 bolt mount
SA2N8/9,BA2T8V,BA2N9V,BA2S8H,
BA2S9H,BA2V9H
5/83-92 E1400, E1800, E2000, E2200 BJ250 BJ251 TE679 TE679 RE854 Ball joints have 3 mounting holes
SRSS,SD Bongo Panel Van, SR89V,SREAV 3 bolt mount 3 bolt mount male end BJ250 - 3 bolt mount BLD 17.85mm
SRE9W,SRF9W,SR29V,SR2AV,SS48V,SS88W, BJ251 - 3 bolt mount BLD 19.76mm
SSF8V,SRE9V,SD89T,SD29T,SD2AT,SDEAT RE854 - 200mm 17x1.0 (socket) 14x1.5 (tre)
10/84-9/85 E series SR,SS, 4WD Bongo Panel Van SREAM, BJ250 BJ1462 RE1410 Upper ball joints have 3 mounting holes
SS88M,SS28M,SS28R,SS88R,SSE8R 3 bolt mount
10/85-on E series SR,SS, 4WD Bongo Panel Van SREAM, BJ250 BJ1464 RE1410 Upper ball joints have 3 mounting holes
SS88M,SS28M,SS28R,SS88R,SSE8R 3 bolt mount
F Series (Bongo - also see E series Bongo above)

1966-68 Bongo Van F1000 FSA,FSAV,FSAH 800kg RH-BJ95 RH-BJ97 TE192L TE192L TE191R TE191R Male type tie rod ends
LH-BJ96 LH-BJ98 LHT Male LHT Male RHT Female RHT Female
1968-77 Bongo Van F1000 FPA,FPAH,FPAV 500kg BJ196 BJ197 TE443L TE443L TE445R TE445R Female type tie rod ends
Female Female Female Female
MPV
11/89-98 MPV - 2WD BJ3430 TE1581 TE1581 RE1025 Front 2WD ONLY
inc. arm or STB7401 RE1025 - 342mm long - suits LV10E1 rack
(up to 4/96) RE1580 - 184mm long - suits LV10E1 rack
(12/95-on) RE1581 - 184mm long - suits LV10E2 rack
check dimensions b4 ordering RE1581 - 184mm 18x1.5 (socket) 14x1.5 (tre)
1989-98 MPV - 4WD BJ4162 TE1621 TE1621 RE1025 4WD ONLY

or RE1025 - 342mm long - suits LV10E1 rack
(up to 4/96) RE1580 - 184mm long - suits LV10E1 rack
(12/95-on) RE1581 - 184mm long - suits LV10E2 rack
check dimensions b4 ordering RE1581 - 184mm 18x1.5 (socket) 14x1.5 (tre)
8/99-9/06 MPV - 2WD BJ4164 TE4157 TE4157 RE6796 Front RE6796 - 337mm 16x1.5 (socket) 14x1.5 (tre)
LW STB8170

KING PIN LINK
SET
YEAR MODEL
T Series
1976-80 T2000,T2600,T3000,T3500,T4100,T4600 WE KX605 TE606L TE606R King pin set 30mm x 175mm
1980-on T2000,T2600,T3000,T3500,T4100,T4600 WE KX605 TE606L TE606R King pin set 30mm x 175mm
TITAN - see T Series above
TK Series ute & van

5/68-71 1000, 1200 Ute - TK series BJ196 BJ197 TE680 TE680 SX5232
1971-76 1200, 1300 Ute - TK series Familia Truck BJ196 BJ197 TE479L TE479L TE505R TE505R SX5233 Check tie rod end threads prior to ordering
1976-79 1600 Ute & Van - TK series Familia Truck BJ196 BJ197 TE508L TE508L TE515R TE515R Check tie rod end threads prior to ordering
TRAVELLER
5/83-on E1800, E2000 BJ250 BJ251 TE679 TE679 RE854 BJ250 - 3 bolt mount BLD 17.85mm
3 bolt mount male end BJ251 - 3 bolt mount BLD 19.76mm
TRIBUTE
2001-02 Tribute BJ306 TE4170 TE4170 RE4170 Front RE4170 - 351mm 16x1.5 (socket) 14x1.5 (tre)
(BJ4170) (RE2240) STB8820
2002-05 Tribute BJ306 TE4170 TE4170 RE4170 Front RE4170 - 351mm 16x1.5 (socket) 14x1.5 (tre)
EPFW, EPEW or (RE2240) STB8820
RH-BJ3433R
LH-BJ3433L
inc. Arm
2005-06 Tribute BJ306

EP3W, EPFW or
RH-BJ3433R
LH-BJ3433L
inc. Arm

KING PIN LINK
SET
YEAR MODEL
MERCEDES
180/190 Series
1955-66 180,180A,B,C,DB,DC TE402L TE402L TE402R TE402R Tie rod ends - 14 x 1.5mm threads
14x1.5mm thread 14x1.5mm thread 14x1.5mm thread 14x1.5mm thread
1955-66 190,190B,C,D,DB,DC TE402L TE402L TE402R TE402R Tie rod ends - 14 x 1.5mm threads
"A" Class
10/98-2/05 "A" Class (W168) RE6638 RE6638 - 210mm 14x1.5 (socket) 12x1.5 (tre)
p/steer
"C" Class
11/00-on "C" Class RE6637 RE6637 - 257mm 16x1.5 (socket) 14x1.5 (tre)
p/steer
"E" Class
1/96-on "E" Class RE6665 RE6665 - 261mm 16x1.5 (socket) 14x1.5 (tre)
p/steer
"S" Class
1/96-on "S" Class RE6637 RE6637 - 257mm 16x1.5 (socket) 14x1.5 (tre)
p/steer
MB
11/99-1/05 MB100, MB140 RE6854 RE6854 - 201mm 17x1.0 (socket) 14x1.5 (tre)
p/steer (can use RE854)
"ML" Class
9/98-7/05 "ML" Class - 163 Chassis RE6612 RE6612 - 174mm 16x1.5 (socket) 16x1.5 (tre)
p/steer
8/05-on "ML" Class - 164 Chassis RE6677 RE6677 - 221mm 16x1.5 (socket) 14x1.5 (tre)
p/steer
W107 series
1971-9/85 280, 350, 380, 450, 500SL, SLC BJ187 BJ188 TE402L TE402L TE402R TE402R Tie rod ends - 14 x 1.5mm threads
NLA 14x1.5mm thread 14x1.5mm thread 14x1.5mm thread 14x1.5mm thread
9/85-8/89 280, 350, 380, 450, 500SL, SLC BJ971 TE402L TE402L TE402R TE402R Tie rod ends - 14 x 1.5mm threads
W108, W109 Series

1965-72 250S, SE, 280S, SE, SEL, 35, 300SEL TE402L TE402L TE402R TE402R Tie rod ends - 14 x 1.5mm threads

KING PIN LINK
SET
YEAR MODEL
W110, W111, Series

1961-67 190, 200, 220, 230 TE402L TE402L TE402R TE402R Tie rod ends - 14 x 1.5mm threads
C111 Series
1961-78 250, 280SEC, 35 TE402L TE402L TE402R TE402R Tie rod ends - 14 x 1.5mm threads
W113 Series
1961-78 230, 250, 280SL TE402L TE402L TE402R TE402R Tie rod ends - 14 x 1.5mm threads
W114, W115 Series

1968-77 200, 220, 230, 240D, 250, 280C, E, CE BJ187 BJ188 TE402L TE402L TE402R TE402R TR577 1967-76 Tie rod ends - 14 x 1.5mm threads
"late" taper 14;60 14x1.5mm thread 14x1.5mm thread 14x1.5mm thread 14x1.5mm thread track rod Rear BJ187 - 74mm centre to centre on longest side
BJ1122 STB8089 BJ1122 - 61mm hole
"early" taper 14;50 - not available
W116 Series
9/72-7/80 280S, SE, SEL, 350, 450SE, SEL RH-BJ189 BJ191 TE402L TE582R TE402R TE583L TR578 Tie rod ends - 14 x 1.5mm threads
LH-BJ190 ball joint 14x1.5mm thread 14x1.5mm thread 14x1.5mm thread 14x1.5mm thread track rod
inc. Arm only
press in
5/75-7/80 450SEL, 6.9lt BJ191 TE584R TE584R TE402L TE402L TR579 Tie rod ends - 14 x 1.5mm threads
14x1.5mm thread 14x1.5mm thread 14x1.5mm thread 14x1.5mm thread track rod
W123 Series
1/76-10/84 230E, 240D, 250, 280E, CE, TE, 300D, TD RH-BJ189 BJ191 TE402L TE402L TE3380 TE3380 TR580 Rear Tie rod ends - 14 x 1.5mm threads
LH-BJ190 ball joint to 1977 to 1977 to 1977 to 1977 track rod STB8089
inc. Arm only M14x1.5 LHT M14x1.5 LHT M14x1.5 RHT M14x1.5 RHT
TE9071L TE9071L TE8071R TE8071R Tie rod ends - 16 x 1.5mm threads
1977-8/1982 1977-8/1982 1977-8/1982 1977-8/1982
M16x1.5 LHT M16x1.5 LHT M16x1.5 RHT M16x1.5 RHT
TE402L TE402L TE584R TE584R Tie rod ends - 14 x 1.5mm threads
8/1982-on 8/1982-on 8/1982-on 8/1982-on
W124 Series
12/84-5/97 200-320E, TE CE200D, 300D Turbo, E class BJ186 TE2298 TE2298 TE2299 TE2299 Tie rod ends - 14 x 1.5mm threads
E22 - 320, E200D - E330D Turbo
W126 Series
1/80-8/85 280, 280SE, 280SEL, 380, 380SE, 380SEL RH-BJ438R BJ191 TE583L TE402L TE582R TE402R TR581 Tie rod ends - 14 x 1.5mm threads
500SE & 500SEL (BJ193) ball joint 14x1.5mm thread 14x1.5mm thread 14x1.5mm thread 14x1.5mm thread track rod

KING PIN LINK
SET
YEAR MODEL
LH-BJ437L only
(BJ192)
inc. Arm
W140 Series
1991-99 S class RE6637 Front RE6637 - 257mm 16x1.5 (socket) 14x1.5 (tre)
p/steer RH-STB8091
LH-STB8090
W201 Series
1982-on 190 all models BJ971 TE574R TE572L TE575L TE573R TR571
(BJ186) track rod
W210 Series
1995-03 E class RE6665 Rear RE6665 - 261mm 16x1.5 (socket) 14x1.5 (tre)
p/steer RH-STB8101
LH-STB8102
SPRINTER VAN
2/98-6/06 Sprinter Van BJ227 RE6457 RE6457 - 401mm 16x1.5 (socket) 16x1.5 (tre)
p/steer
7/06-on Sprinter Van RE6458 RE6458 - 420mm 18x1.5 (socket) 16x1.5 (tre)
VITO VAN
2/98-3/04 Vito Van RE7071 RE7071 - 360mm 16x1.5 (socket) 16x1.5 (tre)
p/steer
4/04-on Vito Van RE6655 RE6655 - 302mm 16x1.5 (socket) 16x1.5 (tre)
p/steer
MERCURY
1979-94 Grand Marquis 10327
M.G. - see LEYLAND
MINI - see LEYLAND
MITSUBISHI (VALIANT - see CHRYLSER)

380 - see MAGNA 380
CENTURA - see CHRYSLER

Various Rack Ends identified to suit Colt. Check dimensions b4 ordering.
COLT
1980-3/84 Colt RA, RB GLX sedan & hatch RH-BJ170 TE3665R TE3665R New Zealand - TR671 suits

KING PIN LINK
SET
YEAR MODEL
up to chassis# PK29......... (BJ1170) (TE552R) (TE552R) 83-87 power steer - Rack End
LH-BJ169 74mm 74mm
(BJ1169) M14x1.5 RHT M14x1.5 RHT
3/84-10/86 Colt RC sedan & hatch RH-BJ170 TE729 TE729 New Zealand - TR671 suits
from chassis# PK29......... (BJ1170) (83-85) (83-85) 83-87 power steer - Rack End
LH-BJ169 12x1.5mm thread 12x1.5mm thread RE886
(BJ1169)
10/86-8/88 Colt RD sedan & hatch RH-BJ170 TE730R TE730R

(BJ1170) 80mm 80mm
LH-BJ169 12x1.25mm thread 12x1.25mm thread
(BJ1169)
9/1988-02 Colt RE sedan & hatch RH-BJ170 TE730R TE730R

(BJ1170) 80mm 80mm see rack ends previous page
LH-BJ169 12x1.25mm thread 12x1.25mm thread check dimensions b4 ordering
(BJ1169)
2002-07 Colt TE735 TE735 RE7350 RE7350 - 330mm 16x1 (socket) 12x1.25 (tre)
70mm - 12x1.25 70mm - 12x1.25
CORDIA
1983-85 Cordia AA, AB BJ285 TE3612R TE3612R RE889 RE889 - 320mm 16x1.5 (socket) 14x1.5 (tre)
OD 40.15mm (TE615R) (TE615R)
1985-89 Cordia AC BJ285 TE3612R TE3612R RE890 RE890 - 315mm 16x1.5 (socket) 14x1.5 (tre)
OD 40.15mm (TE615R) (TE615R)
EVO
1992-94 Evo I BJ2852 AWD
Ball Joint Only
1/94-8/95 Evo II BJ2852 AWD

Ball Joint Only
8/95-7/96 Evo III BJ2852 AWD

Ball Joint Only
8/96-1/98 Evo IV AWD
1/98-1/99 Evo V AWD

KING PIN LINK
SET
YEAR MODEL
1/99-3/01 Evo VI AWD
3/01-1/03 Evo VII AWD
1/03-3/05 Evo VIII AWD
3/05-10/07 Evo IX AWD
10/07-on Evo X AWD
GALANT
1970-74 Galant A51, GA, GB BJ116 SX1202 TE463L TE463L TE464R TE464R TR400 TR401 TR401 - 575 mm c/c ball studs & 485mm c/c holes
tie rod ends TR400 - consists of TE463L, TE464R, tube

Male Male Male Male with tube solid
1974-76 Galant GA, GB, GC, GD BJ122 SX1202 TE463L TE463L TE464R TE464R TR400 TR401 TR401 - 575 mm c/c ball studs & 485mm c/c holes
tie rod ends TR400 - consists of TE463L, TE464R, tube

Male Male Male Male with tube solid
1976-86 Galant GC, GD - except A163-8 models BJ122 SX1203 TE463L TE463L TE523R TE522L RH-TR666R SX1207
(SX1147) LH-TR666L (SX1148)
(except GC 1977) Male Male Male
1976-89 Galant GC, GD A163-8 models BJ122 SX1203 TE463L TE463L TE523R TE554L RH-TR666R SX1207
(SX1147) LH-TR666L (SX1148)
1987-93 Galant HG, HH BJ285 TE965 TE965 RE908 Front RE908 - 335mm 16x1.5 (socket) 14x1.5 (tre)
OD 40.15mm STB4208
60mm
1993-98 Galant HJ BJ2602 RH-BJ472R TE3612R TE3612R RE1012 Front RE1012 - 252mm 16x1.5 (socket) 14x1.5 (tre)
LH-BJ473L (TE978) (TE978) (RE986) STB8034
RH-BJ476R straight (TE615R) (TE615R) or
(BJ3775R) RH-BJ474R Universal
LH-BJ477L LH-BJ475L STB4208
(BJ3775L) curved 60mm
inc. Arm inc. Arm Rear
STB8029
1999-02 Galant BJ2602 TE3779 TE3779 RE3779 Front

RH-STB8177

KING PIN LINK
SET
YEAR MODEL
RH-BJ476R LH-STB8176
(BJ3775R)
LH-BJ477L
(BJ3775L)
inc. Arm
LANCER
1974-81 Lancer LA, LB, LC BJ122 SX1204 TE463L TE463L TE464R TE464R TR400 SX1206 SX1206 - 110mm c/c BLD 12.38mm
Male Male SX1206 - 23.66-24.46 tapered spline - 36 splines
Male Male
1979-87 Lancer A171A, A172A, A174A SX2204 SX1206
1988-9/92 Lancer CA, CB RH-BJ169 TE730R TE730R RE888 Front BJ169/170 - 2 bolt mount. Some vehicles this model
(BJ1169) 80mm 80mm male end STB8031 range used BJ925 - press in. Check before ordering.
LH-BJ170 12x1.25mm thread 12x1.25mm thread (RE7043) or Universal RE888 - 315mm 16x1.5 (socket) 12x1.25 (tre)
(BJ1170) Female Female STB4208
77mm
10/92-97 Lancer CC, CD BJ409 TE730R TE730R RE1013 Front RE1013 excl. Hatch. For hatch use RE7073
(BJ1409) (TE977) (TE977) (RE7969) STB8035 RE1013 - 329mm 16x1.5 (socket) 12x1.25 (tre)
80mm 80mm excl. hatch Rear
12x1.25mm thread 12x1.25mm thread STB8030
1997-03 Lancer CE BJ285 TE730R TE730R RE1013 2001-on TE730R - 76mm 12x1.25 female BLD 13.46mm
OD 40.15mm (TE2076R) (TE2076R) (RE7969) Front RE1013 - 329mm 16x1.5 (socket) 12x1.25 (tre)
80mm 80mm STB8178
6/02-11/05 Lancer CG, CH BJ285 TE730R TE730R RE1013 Front

OD 40.15mm (TE2076R) (TE2076R) (RE7969) STB8178
80mm 80mm Rear
12x1.25mm thread 12x1.25mm thread STB8179
2003-on Lancer CS2A BJ285 TE730R TE730R RE1013 TE730R - 76mm 12x1.25 female BLD 13.46mm
OD 40.15mm (TE2076R) (TE2076R) (RE7969) RE1013 - 329mm 16x1.5 (socket) 12x1.25 (tre)
80mm 80mm
8/07-2011 Lancer CJ RE6464 RE6464 - 355mm 14x1.5 (socket) 14x1.5 (tre)

KING PIN LINK
SET
YEAR MODEL
MAGNA (INCLUDES VERADA)

1985-9/87 Magna TM - manual steer BJ285 TE3612R TE3612R RE889 RE889 - 320mm 16x1.5 (socket) 14x1.5 (tre)
(BJ295) (TE615R) (TE615R)
OD 40.15mm
1985-9/87 Magna TM - power steer BJ285 TE3612R TE3612R RE908 RE908 - 335mm 16x1.5 (socket) 14x1.5 (tre)
(BJ295) (TE615R) (TE615R)
OD 40.15mm
9/87-4/91 Magna TM, TN, TP, TR - manual steer BJ285 TE3612R TE3612R RE889 RE889 - 320mm 16x1.5 (socket) 14x1.5 (tre)
(BJ295) (TE615R) (TE615R)
OD 40.15mm
9/87-4/91 Magna TM, TN, TP, TR - power steer BJ285 TE3612R TE3612R RE908 TE615R - BLD 13.40mm
(BJ295) (TE615R) (TE615R) or RE908 - 335mm 16x1.5 (socket) 14x1.5 (tre)
OD 40.15mm RE1830 RE1830 - 344mm 16x1.5 (socket) 14x1.5 (tre)
4/91-4/96 Magna, Verada TR, TS inc. wagon BJ294 TE3612R TE3612R RE908 Front BJ294 - 43mm diameter
(BJ913) (TE615R) (TE615R) or STB8029 RE908 - 335mm 16x1.5 (socket) 14x1.5 (tre)
OD 43.00mm RE1830 Rear RE1830 - 344mm 16x1.5 (socket) 14x1.5 (tre)
STB8046
4/96-on Magna TE, TF - TRW rack BJ294 TE9108R TE9108R RE1008 Front TE9108R - BLD 13.54mm
(BJ913) (RE7077) STB4208 RE1008 - 345mm 16x1.5 (socket) 14x1.5 (tre)
OD 43.00mm (P191043) 60mm
(RE991) Rear
STB8029
3/99-7/03 Magna TH, TJ BJ294 TE9108R TE9108R RE1008 Front RE1008 - 345mm 16x1.5 (socket) 14x1.5 (tre)
(BJ913) (P191043) STB4208
OD 43.00mm 60mm
Rear
STB8029
6/03-10/05 Magna TL, TW Front

STB4208
60mm
Rear
STB4208
60mm
10/05-2/08 Magna 380 RE6634 RE6634 - 346mm 14x1.5 (socket) 14x1.5 (tre)
p/steer
MIRAGE

KING PIN LINK
SET
YEAR MODEL
1996-05 Mirage CE BJ285 TE730R TE730R RE1013 Front RE1013 - 329mm 16x1.5 (socket) 12x1.25 (tre)
(BJ295) 12x1.25mm thread 12x1.25mm thread (RE7969) STB8180
NIMBUS
1983-92 Nimbus UA, UB, UC - manual steer BJ285 TE3612R TE3612R RE856 BJ285 - 40mm diameter
OD 40.15mm (TE615R) (TE615R)
1983-2/91 Nimbus UA, UB, UC - power steer BJ285 TE3612R TE3612R RE889 BJ285 - 40mm diameter
OD 40.15mm (TE615R) (TE615R)
3/91-11/98 Nimbus UF BJ285 TE3612R TE3612R RE1857 BJ285 - 40mm diameter

OD 40.15mm (TE615R) (TE615R) (RE7042)
(RE974)
11/98-5/05 Nimbus UG RE1830 Front BJ285 - 40mm diameter

STB4209
240mm
OUTLANDER
2/03-on Outlander ZE, ZF Front
STB7517
Rear
STB7510
PROTON - see PROTON
SCORPION
1978-81 Scorpion GE, GH BJ122 SX1203 TE463L TE463L TE523R TE522L SX1207
(SX1147) (SX1148)
1980-85 Scorpion GJ, GK, GL BJ172 SX1203 TE463L TE463L TE523R TE554L SX1207
(SX1147) (SX1148)
SIGMA
1977-81 Sigma GE, GH BJ122 SX1203 TE463L TE463L TE523R TE522L SX1207
(SX1147) (SX1148)
1980-87 Sigma GJ, GK, GL, GN BJ172 SX1203 TE463L TE463L TE523R TE554L SX1207
(SX1147) (SX1148)
STARION
1982-87 Starion JA, JB, JD BJ172 TE463L TE463L TE523R TE554L Please check tie rod end dimensions b4 ordering
please check dimensions thoroughly before ordering

KING PIN LINK
SET
YEAR MODEL
VALIANT - see CHRYSLER
VERADA - see MAGNA
MITSUBISHI - Commercial
CANTER
1975-79 Canter T210, T217 series KX258 TE561R TE561L King pin set - 28 x 179.4mm
9mm bearing RH Thread LH Thread Tie Rod Ends - check thread prior to ordering
20x1.5 20x1.5 TE561 - 95mm 20x1.5 BLD 16.7mm
1979-82 Canter FC2, FE2 series KX258 TE561R TE561L KX258 bush length = 49mm
9mm bearing RH Thread LH Thread TE561 - 95mm 20x1.5 BLD 16.7mm
1983-84 Canter FC2, FE2 series KX259 TE561R TE561L KX259 bush length = 44mm
20x1.5 20x1.5 TE561 - 95mm 20x1.5 BLD 16.7mm
10/85-on Canter FB series BJ2303 TE7361R TE7361R

(FB501)
1983-on Canter FE211 - 9mm bearing KX526 TE561R TE561L King pin set - 28 x 180mm
20x1.5 20x1.5 TE561 - 95mm 20x1.5 BLD 16.7mm
1978-on Canter FE211 - 16mm bearing KX534 TE561R TE561L King pin set - 28 x 180mm
to chassis no. C502437/E5138/D530130 16mm bearing RH Thread LH Thread Tie Rod Ends - check thread prior to ordering
1976-on Canter FE444C KX534 TE561R TE561L King pin set - 28 x 180mm
1993-on Canter FA5 BJ2303
1993-on Canter FE5 BJ2303 TE7891L TE7891R

(FE507B)
4/95-on Canter FE6 TE7831L TE7831R
CHALLENGER
1996-on Challenger K96W, K97W, K99W BJ820 RH-BJ823 SX6273 TE976R TE976R TE618R TE618R SX5248 Tie Rod Ends - some models have been
3 bolt mount (BJ6270) (TE6275) (TE6275) (TE6274) (TE6274) known to have TE722 Inner Tie Rod Ends in
LH-BJ822 M16x1.5 RHT M16x1.5 RHT place of the TE618R. Please check prior
(BJ6269) or or to ordering.
4 bolt mount TE722 TE722

KING PIN LINK
SET
YEAR MODEL
DELICA
1/91-99 Delica 4WD (imported) BJ275 RH-BJ823 TE715R TE715R RE911 Front
LH-BJ822 (TE7331) (TE7331) (RE7074) STB8185
Rear
STB8186
FUSO
1965-on Fuso T620, T622, T653, FK115 4ton KX276 TE628L TE628R King pin set - 35 x 194mm
1977-84 Fuso FM215, FM515, FK455, FK457 6ton KX277 King pin set - 45 x 217mm
Fuso FM515 KX531

Fuso FM515,FM555,FK457 KX538
Fuso FM555FS, JS, MS/FM557 KX521/1

1980-on FK/,FK102,FK115 4.25ton KX529
1983-on FK415FR, KR, WR 3.5-4.25ton KX530
FP415,FP418,FS428,FV415,FV458 KX532
1986-on FV418 KX539
1990-on FK330,FK415,FK417 KX540
1988-on FM516 TE7741L TE7741R
L200 (2WD)
1978-8/80 L200 D50, MA BJ212 BJ218 SX1157 TE463L TE463L TE523R TE588L SX1207 Upper inner pivot kit - PIV7251
press in (BJ216) Male Female Upper Inner Pivot Kit (SX1148) BJ218 - 3 bolt mount BLD 20.22mm
Male Male Part No. PIV7251 BJ212 - body dia. 40.04mm BLD 16.25mm
to suit Mitsubishi L200 & Pajero
9/80-86 L200 MB, MC, MD 2WD BJ214 BJ218 SX1158 TE463L TE463L TE523R TE588L 2WD & 4WD 1978-91 SX5228 SX5228 - 42 splines (with timing mark)
press in Male Female SX7251A - two kits required per vehicle (SX1255) Upper inner pivot kit - PIV7251
3 bolt mount Male Male One Pin & Two bushes per kit SX1158 - flat straight mount 67.5mm c/c
1986-96 L200 MB, MC, MD 2WD BJ7155 BJ218 SX4251 TE463L TE463L TE523R TE588L SX5228 SX5228 - 42 splines (with timing mark)
Male Female Male Female (SX1255) Upper inner pivot kit - PIV7251
3 bolt mount BJ218 - 3 bolt mount BLD-20.22mm

KING PIN LINK
SET
YEAR MODEL
1996-on L200 2WD SX1030 TE617R TE617R TE618R TE618R SX1029 Upper inner pivot kit - PIV7251
(SX2410) M16x1.5 RHT M16x1.5 RHT SX1030 - pressed metal bracket
(SX7770i) M16x1.5 LHT M16x1.5 LHT TE618R - 173mm 16x1.5 BLD 13.80mm
L200 (4WD)
9/80-86 L200 MB, MC, MD 4WD BJ214 BJ215 SX1159 TE617R TE617R TE618R TE618R SX1213 SX1213 - 26-27mm tapered spline with 42 splines
press in M16x1.5 RHT M16x1.5 RHT Upper inner pivot kit - PIV7251
4 bolt mount M16x1.5 LHT M16x1.5 LHT TE618R - 173mm c/e 16x1.5 BLD 13.80mm
1986-96 L200 MB, MC, MD 4WD BJ7155 BJ215 SX1159 TE617R TE617R TE618R TE618R SX5251 K34T Upper inner pivot kit - PIV7251
M16x1.5 RHT M16x1.5 RHT (SX7227) 94-on SX5251 - 29.5-31mm tapered with 40 splines
4 bolt mount M16x1.5 LHT M16x1.5 LHT Front SX5251 - 10mm shorter than SX5245
BLD - 13.63mm STB8041 TE618R - 173mm c/e 16x1.5 BLD 13.80mm
1996-on L200 4WD BJ820 RH-BJ823 TE976R TE976R TE618R TE618R K34T TE618R - 173mm c/e 16x1.5 BLD 13.80mm
LH-BJ822 (TE6275) (TE6275) (TE6274) (TE6274) 94-on
Front
STB8041
L300 (2WD)
1968-76 L300 express T100,120,121 BJ245 BJ246 TE551R TE551R BJ245 - 4 bolt mount BLD 16.39mm
4 bolt mount M14x1.5 LHT M14x1.5 LHT
1976-79 L300 express T100,120,121 BJ212 TE551R TE551R

press in M14x1.5 LHT M14x1.5 LHT
1980-82 L300 SA3,SB3 series, express van, wagon BJ212 BJ218 TE551R TE551R BJ218 - 3 bolt mount BLD-20.22mm
3 & 8 seater 1000kg press in (BJ216) M14x1.5 LHT M14x1.5 LHT
L031P,L034P,L031PV,L032PV,L033PW,
L035PW

KING PIN LINK
SET
YEAR MODEL
1980-10/82 L300 SA, SB 2WD BJ212 BJ218 SX1161 TE3665R TE3665R TE551R TE551R DL403 SX1218 SX1218 - suits bell crank application
L031P,L034P,L031PV,L032PV,L033PW, press in (BJ216) (TE552R) (TE552R) M14x1.5 LHT M14x1.5 LHT Bell crank pivot - SX6245
L035PW 4 bolt mount 74mm 74mm steering Bell crank pivot bush - OEM6245
BLD - 13.29mm box to SX1161 - 69.88 c/c between mounting holes
M14x1.5 RHT M14x1.5 RHT bell crank
11/82-83 L300 SA, SB 2WD BJ212 BJ218 SX1161 TE615R TE615R TE616L TE616L DL403 SX1218 SX1218 - suits bell crank application
L036P,L038P,L063P,L068P,L033PV, press in (BJ216) (TE3612R) (TE3612R) (TE616R) (TE616R) Bell crank pivot - SX6245
L036PV,L038PV,L063PV,L068PV,L033PW, 4 bolt mount steering Bell crank pivot bush - OEM6245
L035PW,L038PW,L063PW,068PW BLD - 13.29mm M14x1.5 RHT M14x1.5 RHT box to SX1161 - 69.88 c/c between mounting holes
bell crank
10/83-6/86 L300 SC, SD, SE 2WD BJ214 BJ217 SX1162 TE615R TE615R TE616L TE616L DL404 SX1214 SX1214 - suits bell crank application
L036P,L038P,L063P,L068P,L033PV, press in (BJ810) (TE3612R) (TE3612R) (TE616R) (TE616R) steering Bell crank pivot - SX6245
L036PV,L038PV,L063PV,L068PV,L033PW, 4 bolt mount box to boomerang Bell crank pivot bush - OEM6245
L035PW,L038PW,L063PW,068PW BLD - 13.63mm M14x1.5 RHT M14x1.5 RHT bell crank shape SX1214 - BLD 13.57mm - centre hole 36 splines
SX1214 - end tapered hole 12.61-14.51mm
6/86-92 L300 SF, SG 2WD - manual steer BJ275 BJ276 TE715R TE715R RE909 RE909 - 310mm 17x1 (socket) 14x1.5 (tre)
P01V,P02V,P05V,P12V,P15V,P03W, female end female end BJ275 - 3 bolt mount BLD 17.82mm
P04W,P05W,P15W BJ276 - press in Body dia. 46.43mm BLD 19.44mm
6/86-92 L300 SF, SG 2WD - power steer BJ275 BJ276 TE715R TE715R RE890 RE890 - 315mm 16x1.5 (socket) 14x1.5 (tre)
P01V,P02V,P05V,P12V,P15V,P03W, female end female end BJ275 - 3 bolt mount BLD 17.82mm
P04W,P05W,P15W BJ276 - press in Body dia. 46.43mm BLD 19.44mm
1992-on L300 SH, SJ 2WD (L039P) BJ275 BJ276 TE715R TE715R RE1018 Front RE1018 - 310mm 16x1.5 (socket) 14x1.5 (tre)
for Press In (TE7331) (TE7331) STB8045 BJ275 - 3 bolt mount BLD 17.82mm
If Bolt In - NLA female end female end Rear BJ276 - press in Body dia. 46.43mm BLD 19.44mm
STB8153
L300 (4WD)
10/83-6/86 L300 SC, SD, SE 4WD BJ214 BJ215 SX1163 TE617R TE617R TE618R TE618R TR779 SX5781 1985 bell crank - SX7550 (see diagram below)

KING PIN LINK
SET
YEAR MODEL
L035GV,L037GV,L038GV,L035GW, press in NLA (TE6274) (TE6274) (10/82-90) to bell crank Upper inner pivot kit - PIV7251
L037GW,L038GW 4 bolt mount M16x1.5 LHT M16x1.5 LHT M16x1.5 RHT M16x1.5 RHT 795mm Steering Box to Bell Crank - SX5799
bell crank SX5799 SX5781 - 120mm c/c BLD 13.75mm
to idler steering box SX5781 - 26.27mm tapered spline - 42 splines
to bell crank TE618R - 173mm c/e 16x1.5 BLD 13.67mm
SX7550
bell crank
1985
6/86-on L300 SF, SG, SH, SJ 4WD - manual steer BJ275 RH-BJ277 SX1163 TE715R TE715R RE910 TR779 SX5781
P23V,P25V,P45V,P23W,P24W,P25W, LH-BJ278 NLA female end female end (10/82-90) to bell crank
P35W 795mm
bell crank
to idler
6/86-on L300 SF, SG, SH, SJ 4WD - power steer BJ275 RH-BJ277 SX1163 TE715R TE715R RE911 TR779 SX5781
P23V,P25V,P45V,P23W,P24W,P25W, LH-BJ278 NLA female end female end (RE7074) (10/82-90) to bell crank
P35W 795mm
bell crank
to idler
8/88-on L300 4WD (L039G) BJ215 TE618R TE618R TE618R - 173mm c/e 16x1.5 BLD 13.67mm
(TE6274) (TE6274)
OUTLANDER
2005-10 Outlander - Series II BJ7872
PAJERO (MONTERO)
4/82-10/84 Pajero NA 4WD manual steer BJ214 BJ215 SX4252 TE617R TE617R TE618R TE618R TR3273 SX5244 SX5244 - 26-27mm tapered spline
to chassis# FL042VDY-01374 petrol press in (TE6274) (TE6274) with 42 splines
and up to FL042VDY4-01375 diesel 4 bolt mount M16x1.5 LHT M16x1.5 LHT M16x1.5 RHT M16x1.5 RHT Upper inner pivot kit - PIV7251
7/83-9/89 Pajero NA 4WD manual steer BJ214 BJ215 SX4252 TE617R TE617R TE618R TE618R TR3273 SX5245 SX5245 - 29.5-31mm tapered spline
from chassis# FL042VDY-01374 petrol press in (TE6274) (TE6274) with 40 splines
and FL043VDY4-01375 diesel on 4 bolt mount M16x1.5 LHT M16x1.5 LHT M16x1.5 RHT M16x1.5 RHT Upper inner pivot kit - PIV7251
7/83-9/89 Pajero NA 4WD power steer BJ214 BJ215 SX4252 TE617R TE617R TE618R TE618R TR3273 SX5245 SX5245 - 30-30.5mm tapered spline
NB, NC, ND, NE, NF, NG 4WD press in (TE6274) (TE6274) with 40 splines
from chassis# FL042VDY-01374 petrol 4 bolt mount M16x1.5 LHT M16x1.5 LHT M16x1.5 RHT M16x1.5 RHT Upper inner pivot kit - PIV7251
and FL043VDY4-01375 diesel on TE618R - 173mm c/e 16x1.5 BLD 13.80mm
9/89-5/91 Pajero NG 4WD BJ214 BJ215 SX4252 TE617R TE617R TE618R TE618R TR3273 SX5246 SX5246 - 32-33mm tapered spline
L141G,L144G,L146G,L149G press in (TE6274) (TE6274) (SX7710) with 32 splines

KING PIN LINK
SET
YEAR MODEL
4 bolt mount M16x1.5 LHT M16x1.5 LHT M16x1.5 RHT M16x1.5 RHT TE618R - 173mm c/e 16x1.5 BLD 13.80mm
5/91-10/96 Pajero NH, NJ 4WD - manual steer BJ820 RH-BJ823 SX4280 TE976R TE976R TE722 TE722 TR6732 SX5248 Front NOTE:
V14V,V23C,V23W,V24C,V24V,V24W, 3 bolt mount (BJ6270) (SX1042) (TE7722) (TE7722) RH-STB8182 SX5246 / SX5248 - different
V24WG,V34V,V43W,V44W,V44WG LH-BJ822 (TE7222) (TE7222) 130mm c/c LH-STB8181 angles from spline to Ball Joint
(BJ6269) Rear SX5248- 32mm dia. Spline with
4 bolt mount M16x1.5 RHT M16x1.5 RHT STB8183 32 splines with timing mark
TE722 - 173mm
5/91-9/97 Pajero NH, NJ, NK 4WD - power steer BJ820 RH-BJ823 SX4280 TE976R TE976R TE722 TE722 TR6732 SX5248 Front SX5248- 32mm dia. Spline with
V14V,V23C,V23W,V24C,V24V,V24W, 3 bolt mount (BJ6270) (SX1042) (TE7722) (TE7722) RH-STB8182 32 splines with timing mark
V24WG,V34V,V43W,V44W,V44WG LH-BJ822 (TE7222) (TE7222) 130mm c/c LH-STB8181
(BJ6269) Rear
4 bolt mount M16x1.5 RHT M16x1.5 RHT STB8183
9/97-4/00 Pajero NL 4WD (K96W) BJ820 RH-BJ823 SX4280 TE976R TE976R TE722 TE722 SX7790 Front
3 bolt mount (BJ6270) (SX1042) (TE7722) (TE7722) RH-STB8182
LH-BJ822 (TE7222) (TE7222) LH-STB8181
(BJ6269) Rear
4 bolt mount M16x1.5 RHT M16x1.5 RHT STB8183
5/00-2003 Pajero NM, NP 4WD BJ2600 BJ2601 TE1456 TE1455 RE1073 Front
K65W,V63W,V68W,V73W,V75W,V78W (BJ6792) (BJ6799) (TE3781) (TE3781) (RE7079) STB4210 STB4201 - Universal Fit - Trim to length
80mm or
Rear
STB4210 STB4201 - Universal Fit - Trim to length
115mm or
2006-on Pajero V83W BJ2600 BJ2601 TE4441L TE4441R RE4440 RE4440 - 205mm 16x1.5(socket) 16x1.5 (tre)
(BJ6792) (BJ6799)
3/99-9/03 Pajero iO - QA RE6764
bj215 sx7790

KING PIN LINK
SET
YEAR MODEL
sx5244
ROSA Bus
ROSA Bus BJ2303
STARWAGON (2WD)
6/86-92 Starwagon SF, SG 2WD BJ275 BJ276 TE715R TE715R TE616L TE616L BJ275 - 3 bolt mount BLD 17.82mm
press in female end female end (TE616R) (TE616R) BJ276 - press in Body dia. 46.43mm BLD 19.44mm
1992-on Starwagon SH, WA 2WD BJ275 BJ276 TE715R TE715R RE971 BJ275 - 3 bolt mount BLD 17.82mm
for Press In female end female end RE971 - 320mm 16x1.5 (socket) 14x1.5 (tre)
If Bolt In - NLA
STARWAGON (4WD)
1986-on Starwagon SF, SG, SH, WA 4WD BJ275 RH-BJ277 TE715R TE715R RE910 BJ275 - 3 bolt mount BLD 17.82mm
manual steer LH-BJ278 female end female end RE910 - 282mm 17x1 (socket) 14x1.5 (tre)
1986-on Starwagon SF, SG, SH, WA 4WD BJ275 RH-BJ277 TE715R TE715R RE911 BJ275 - 3 bolt mount BLD 17.82mm
power steer LH-BJ278 female end female end RE911 - 291mm 16x1.5 (socket) 14x1.5 (tre)

KING PIN LINK
SET
YEAR MODEL
TRITON (2WD)
1986-92 Triton ME, MF, MG, MH 2WD BJ214 BJ218 SX4251 TE463L TE463L TE523R TE588L SX5228 some models use SX5245 - check spline
press in (BJ216) Male Male Male Female (SX1255) SX5228 - 42 splines with alignment groove (no master)
slight bend SX5245 - 40 splines (straight arm)
BJ218 - 3 bolt mount BLD-20.22mm
9/92-10/96 Triton MJ 2WD - excluding V6 RH-BJ821 BJ810 SX4251 TE463L TE463L TE523R TE588L SX5228 some models use SX5245 - check spline
LH-BJ811 Male Female (SX1255) SX5228 - 42 splines with alignment groove (no master)
bolt in Male Male slight bend SX5245 - 40 splines (straight arm)
if press in
use
BJ7155
9/92-10/96 Triton MJ 2WD - V6 BJ810 SX1159 SX1159 - fixed stud type
1996-03 Triton MK 2WD - excluding V6 BJ7155 BJ218 SX1030 TE617R TE617R TE7732 TE7732 SX1029 SX1030 - pressed metal bracket
(BJ2427) (SX2410) BJ7155 - please check prior to ordering
OD 40.15 (SX7770i) M16x1.5 LHT M16x1.5 LHT
1996-03 Triton MK 2WD - V6 BJ820 RH-BJ823 SX6273 TE976R TE976R TE618R TE618R SX7790 SX6273 - cast bracket
(BJ6270) (TE6274) (TE6274) TE618R - 173mm c/e 16x1.5 BLD 13.80mm
LH-BJ822 M16x1.5 RHT M16x1.5 RHT check before ordering
(BJ6269)
4 bolt mount check before ordering
2005-on Triton ML 2WD BJ7941 BJ2601 TE7941 TE7941 RE7940

(KA4T)
TRITON (4WD)
1986-3/91 Triton ME, MF, MG, MH 4WD - petrol & diesel BJ214 BJ215 SX1159 TE617R TE617R TE618R TE618R SX5251 SX5251 - 29.5-31mm tapered with 40 splines
press in (TE6274) (TE6274) (SX7227) SX5251 - 10mm shorter than SX5245
M16x1.5 LHT M16x1.5 LHT M16x1.5 RHT M16x1.5 RHT BLD - 13.63mm TE618R - 173mm c/e 16x1.5 BLD 13.80mm
4/91-96 Triton MJ 4WD BJ7155 BJ215 SX1159 TE617R TE617R TE618R TE618R SX5251 SX5251 - 29.5-31mm tapered with 40 splines
(TE6274) (TE6274) (SX7227) SX5251 - 10mm shorter than SX5245
4 bolt mount M16x1.5 LHT M16x1.5 LHT M16x1.5 RHT M16x1.5 RHT BLD - 13.63mm TE618R - 173mm c/e 16x1.5 BLD 13.80mm

KING PIN LINK
SET
YEAR MODEL
10/96-06 Triton MK 4WD BJ820 RH-BJ823 SX6273 TE976R TE976R TE618R TE618R TR3560 SX7790 SX6273 - cast bracket
3 bolt mount (BJ6270) (TE6275) (TE6275) (TE6274) (TE6274) Relay Rod TE618R - 173mm c/e 16x1.5 BLD 13.80mm
LH-BJ822 M16x1.5 RHT M16x1.5 RHT
(BJ6269)
4 bolt mount
6/06-on Triton ML 4WD BJ2600 BJ2601 TE1456 TE1455 RE7950

KB4T, KB8T
MORRIS - see LEYLAND
NISSAN inc. DATSUN

1000
1967-70 Datsun 1000 B10,RB10,VB10,B20 BJ89 BJ91 TE187L TE187R TE183R TE183L Outer tie rod ends - 12mm thread
outer's have 12mm thread 12mm thread 12mm thread
outer's have 14mm thread 14mm thread 14mm thread TE437 - 83mm 14x1.5 female BLD 13.2mm
LH Thread RH Thread
1200
1969-74 Dastun 1200 B110, B120,KB110,VB110 BJ92 SX1135 TE440L TE440R TE519R TE519L RH-TE519L TR409 BJ92 - mounting holes 41mm apart centre to centre
77mm long straight 107mm long with relief bend LH-TE519R TR409 - 542mm c/c ball studs
120Y
1973-76 Datsun 120Y B120,B121,B210, B211 BJ92 SX1136 TE518L TE518R TE519R TE519L RH-TE519L TR412 BJ92 - mounting holes 41mm apart centre to centre
77mm long with bend 107mm long with relief bend LH-TE519R
1975-77 Datsun 120Y B120,B121,B210, B211 BJ176 SX1136 TE518L TE518R TE519R TE519L RH-TE519L TR412 BJ176 - mounting holes 51mm apart centre to centre
1976-79 Datsun 120Y B310 BJ176 SX1136 TE518L TE518R TE519R TE519L RH-TE519L TR412 BJ176 - mounting holes 51mm apart centre to centre
1300/1400/1600
67-9/68 Datsun 1300/1400/1600 sedan BJ146 SX1121 BJ146 - 12mm ball bolt thread
12mm thread idler arm SX1121 - 'straight' arm

KING PIN LINK
SET
YEAR MODEL
10/68-1972 Datsun 1300/1400/1600 sedan & wagon BJ85 SX1121 TE437L TE437R TE438R TE438L RH-TR413R TR415 BJ85 - 14mm ball bolt thread
P510 series 14mm thread idler arm 14mm thread 14mm thread 14mm thread 14mm thread LH-TR413L TR413R - consists of TE437R / TE438L / CR655
LH Thread RH Thread slight bend slight bend Connecting Rod - CR655 (14x1.5) 166mm o/all lgth
1973-77 Datsun 140J,140Y,160B, Violet BJ85 SX1121 TE437L TE437R TE438R TE438L BJ85 - 14mm ball bolt thread
idler arm 14mm thread 14mm thread 14mm thread 14mm thread TE437 - 83mm 14x1.5 female BLD 13.2mm
LH Thread RH Thread TE438 - 116mm 14x1.5 female BLD 13.2mm bend
180B
1972-10/77 Datsun 180B sedan, wagon & SSS coupe BJ85 SX1121 TE437L TE437R TE438R TE438L RH-TR413R TR415 BJ85 - 14mm ball bolt thread
idler arm 14mm thread 14mm thread 14mm thread 14mm thread LH-TR413L TR413R - consists of TE437R / TE438L / CR655
LH Thread RH Thread slight bend slight bend Connecting Rod - CR655 (14x1.5) 166mm o/all lgth
180SX - see GAZELLE
200B
1975-79 Datsun 200B SX,S10,S11 SX1121 TE437L TE437R TE438R TE438L TE437 - 83mm 14x1.5 female BLD 13.2mm
3 Bolt Mount 14mm thread 14mm thread 14mm thread 14mm thread TE438 - 116mm 14x1.5 female BLD 13.2mm bend
idler arm LH Thread RH Thread
10/77-81 Datsun 200B sedan, wagon & SSS coupe BJ151 SX4220 TE520L TE520L TE521R TE521R TR656 TR416 TR656 - consists of TE520L / TE521R / AS656
2 Bolt Mount Adjusting Sleeve - AS656 (18x1.5) 100mm o/all lgth
M18x1.5 LHT M18x1.5 LHT M18x1.5 RHT M18x1.5 RHT TE521R - 255mm 18x1.5 U bend in shank
TE520L - 98mm 18x1.5 straight
200SX
1991-94 200SX RH-BJ506R BJ491 - 39mm press in lower ball joint
LH-BJ507L BJ291 - 41mm press in lower ball joint
inc. Arm
1994-98 200SX - S14 BJ243 TE871 TE871 RE7081 Front RE7081 - 290mm 16x1.0 (socket) 14x1.5 (tre)
4 bolt mount 10/96-on STB8060 BJ243 - tight 4 bolt pattern mounts
240C,260C,280C,300C
1971-74 Datsun 240C - H230 series TE545R TE545R TE546L TE546L TE545R - 81mm 14x1.5 Female BLD 13.48mm

KING PIN LINK
SET
YEAR MODEL
(TE432R) (TE432R)
1975-6/77 Datsun 260C - H330 series RH-BJ206 SX260C TE545R TE545R TE546L TE546L TR408 TE545R - 81mm 14x1.5 Female BLD 13.48mm
LH-BJ207 (TE432R) (TE432R)
7/77-6/79 Datsun 280C - H330 series BJ205 RH-BJ206 SX260C TE545R TE545R TE546L TE546L TR408 TE545R - 81mm 14x1.5 Female BLD 13.48mm
LH-BJ207 (TE432R) (TE432R) BJ205 - 4 bolt mount BLD 16mm
6/79-1984 Datsun 280C - P430 series BJ205 RH-BJ327 SX4253 TE3655L TE3655L TE3657R TE3656R RH-TR439R TR410 TE3655L - 100mm 18x1.5 Male BLD 14.62mm
(BJ2027) LH-TR439L NLA BJ205 - 4 bolt mount BLD 16mm
LH-BJ328
(BJ2028)
1984-87 Datsun 300C - Y30 series BJ554 SX1205 TE234R TE234R TE238R TE239L TR428
VG2#, VG3#, LD28, RD28 p/steer
1984-87 Datsun 300C - Y30 series BJ554 SX1205 TE234R TE234R TE238R TE239L TR428
CA20, L20P p/steer
240K
1973-79 Datsun 240K - C110 series BJ151 TE520L TE520L TE521R TE521R TR656 TR417 TR656 - consists of TE520L / TE521R / AS656
Adjusting Sleeve - AS656 (18x1.5) 100mm o/all lgth
240Z, 260Z, 280ZX, 300ZX

to 6/1970 Datsun 240Z BJ146 12mm ball pin ball joint
12mm thread
7/70-78 Datsun 240Z,260Z,260Z Sports Coupe BJ85 TE860L TE860R RE7082 RE7082 - 133mm 1"x20tpi (socket) 14x1.4 (tre)
14mm thread female female power RE7083 - 150mm 32x1.5 (socket) 14x1.5 (tre)
RH Thread RE7083 14mm ball pin ball joint
manual TE860R - 205mm 14x1.5 Female
8/78-10/81 Datsun 280ZX coupe - manual rack & pinion steering BJ151 TE3644R TE3644R RE859 RE859 - 150mm 16x1 (socket) 14x1.5 (tre)
(TE3644) (TE3644) TE3644R - 227mm 14x1.5 Female
RH Thread RH Thread
8/78-10/81 Datsun 280ZX coupe - with power recirc. ball steering BJ151 SX4254 TE520L TE520L TE521R TE521R TE521R - 255mm 18x1.5 U bend in shank
10/81-10/83 Datsun 280ZX with manual rack & pinion steering BJ151 RE859 RE859 - 150mm 16x1 (socket) 14x1.5 (tre)

KING PIN LINK
SET
YEAR MODEL
male end
10/81-10/83 Datsun 280ZX with power rack & pinion steering BJ151 TE3644R TE3644R RE859 RE859 - 150mm 16x1 (socket) 14x1.5 (tre)
(TE3644) (TE3644) male end
9/83-10/86 300ZX with 3.0lt V6 - Z31# BJ273 TE667 TE667 RE859 TE667R - 210mm Female BLD 13.92mm
(TE667R) (TE667R) male end RE859 - 150mm 16x1 (socket) 14x1.5 (tre)
11/86-89 300ZX inc. turbo - Z31# BJ273 TE666 TE666 RE859 Front RE859 - 150mm 16x1 (socket) 14x1.5 (tre)
(Facelift) (TE666R) (TE666R) male end RH-STB8118
press in RH Thread RH Thread LH-STB8117
Rear
STB7228
7/89-3/92 300ZX inc. turbo - Z32# RH-54500-37P00 TE7125 TE7125 RE4710 - 258mm Front RE858 - Rear Rack End (no boot supplied)
LH-54501-37P00 RE752 - 289mm RH-STB8118 RE858 - 282mm 14x1.5(socket) 12x1.25 (tre)
or front LH-STB8117 RE4710 - 258mm 16x1 (socket) 14x1.5 (tre)

BJ5515 Rear RE752 - 289mm 16x1(socket) 14x1.5(tre)
(55154-39F00) RE858 STB7228 BJ5515 - Hicas Rear Steering Ball Joint
rear rear
3/92-97 300ZX inc. turbo - Z32# BJ5515 RE4710 - 258mm RE858 - Rear Rack End (no boot supplied)
(55154-39F00) RE752 - 289mm RE858 - 282mm 14x1.5(socket) 12x1.25 (tre)
rear front RE4710 - 258mm 16x1 (socket) 14x1.5 (tre)
RE858 RE752 - 289mm 16x1(socket) 14x1.5(tre)
rear BJ5515 - Hicas Rear Steering Ball Joint
350Z
12/02-on 350Z - Z33 RE6670 Front RE6670 - 231mm 16x1.0 (socket) 14x1.5 (tre)
p/steer RH-STB7223
LH-STB7222
Rear
RH-STB7225
LH-STB7224
BLUEBIRD
1963-68 Bluebird P410,P411 BJ58 RH-BJ59 SX1108A TE187L TE187R TE183R TE183L
NLA LH-BJ60 NLA 12mm thread 12mm thread
NLA

KING PIN LINK
SET
YEAR MODEL
67-9/68 Bluebird 510 series (1300,1400,1600) BJ146 SX1121 TE435L TE435R BJ146 - 12mm ball bolt thread
12mm thread NLA NLA
10/68-72 Bluebird 510 series (1300,1400,1600) BJ85 SX1121 TE437L TE437R TE438R TE438L RH-TR655R TR415 BJ85 - 14mm ball bolt thread
14mm thread 14mm thread 14mm thread (TR413R) TR655R - consists of TE437R / TE438L / CR655
LH Thread RH Thread LH-TR655L Connecting Rod - CR655 (14x1.5) 166mm o/all lgth
(TR414L) TE437 - 83mm 14x1.5 female BLD 13.2mm

TE438 - 116mm 14x1.5 female BLD 13.2mm bend
8/71-76 Bluebird 610 series exc. G610 BJ85 SX1121 TE437L TE437R TE438R TE438L RH-TR655R TR415 TR655R - consists of TE437R / TE438L / CR655
14mm thread 14mm thread 14mm thread (TR413R) Connecting Rod - CR655 (14x1.5) 166mm o/all lgth
LH Thread RH Thread LH-TR655L TE437 - 83mm 14x1.5 female BLD 13.2mm

(TR414L) TE438 - 116mm 14x1.5 female BLD 13.2mm bend
1980-86 Bluebird 910 with NO RACK BJ178 TE520L TE520L TE521R TE521R TE521R - 255mm 18x1.5 U bend in shank
1980-86 Bluebird 910 with Japanese steering rack BJ178 TE560L TE560R RE859 Japanese rack
male end RE859 - 150mm 16x1 (socket) 14x1.5 (tre)
fine thread
1980-86 Bluebird 910 with TRW steering rack BJ178 TE560L TE560R RE907TRW TRW rack
(P191006) RE907TRW - 166mm 16x1.5 (socket) 14x1.5(tre)
166mm long male
P189014
135mm long female - NLA
1980-86 Bluebird 910 with captive rack end BJ178 TE560L TE560R P191002 Captive Rack End (no socket on rack end)
coarse thread P191002 - 150mm 16x1.5(socket) 14x1.5 (tre)
1983-87 Bluebird U11 series BJ267 TR683
1987-93 Bluebird U12 series TE4921 TE4921 RE859 RE859 - 150mm 16x1 (socket) 14x1.5 (tre)
male end
10/93-4/95 Bluebird U13 series BJ560 TE981 TE981 RE955 RE955 - 330mm 16x1 (socket) 14x1.5 (tre)
(BJ4016) 14x1.5 RHT 14x1.5 RHT 330mm RE7081 - 290mm 16x1.0 (socket) 14x1.5 (tre)
113mm long 113mm long RE7081
292mm
5/95-6/97 Bluebird U13 series TE4921 TE4921 RE7086 RE7086 - 280mm 16x1.0 (socket) 14x1.5 (tre)

KING PIN LINK
SET
YEAR MODEL
1996-on Bluebird U14 series
CEFIRO
1990-on Cefiro (imported) RE752 1996-on RE752 - 280mm 16x1 (socket) 14x1.5 (tre)
(RE4760) Rear
(RE7087) STB8098
EXA - see PULSAR
GAZELLE / SYLVIA / 180SX

10/75-79 Gazelle S10, S11 BJ85 SX1121 TE437L TE437R TE438R TE438L RH-TR655R TE437 - 83mm 14x1.5 female BLD 13.2mm
14mm thread 14mm thread 14mm thread (TR413R) TE438 - 116mm 14x1.5 female BLD 13.2mm bend
LH Thread RH Thread LH-TR655L
(TR414L)
3/79-4/81 Gazelle S110, S218 BJ163 TE518L TE518R TE519L TE519R

77mm long with bend 107mm long with relief bend
5/81-83 Gazelle S110, S218 BJ4492
8/83-88 Gazelle S12# series BJ178 TE560L TE560R RE859 RE859 - 150mm 16x1 (socket) 14x1.5 (tre)
imported rack RE907TRW - 166mm 16x1.5 (socket) 14x1.5(tre)
5/88-91 Gazelle S13# series TE713 TE713 RE857 TE713 - 95mm 12x1.25 RHT Female
95mm long 95mm long
1/91-93 Gazelle S13# series TE713 TE713 TE713 - 95mm 12x1.25 RHT Female
95mm long 95mm long
1994-98 Gazelle S14# series RH-BJ5612R Front

LH-BJ5612L STB8063
inc. Arm
MAXIMA
10/88-91 Maxima J30 series BJ267 TE4761R TE4761R RE752 Front RE752 - 280mm 16x1 (socket) 14x1.5 (tre)
(BJ555) 14x1.5mm Female (RE4760) STB8060
125mm BLD 12.92mm (RE7087) Rear
RH-STB7619
LH-STB7618
8/91-1/95 Maxima J30 series BJ267 TE4761R TE4761R RE752 Front RE752 - 280mm 16x1 (socket) 14x1.5 (tre)

KING PIN LINK
SET
YEAR MODEL
(BJ555) 14x1.5mm Female (RE4760) STB8060

125mm BLD 12.92mm (RE7087) Rear
RH-STB7619
LH-STB7618
1995-99 Maxima J30 series RH-BJ4618R TE4761R TE4761R Front

LH-BJ4618L 14x1.5mm Female STB8061
inc. Arm 125mm BLD 12.92mm
2/91-7/99 Maxima A32 RH-BJ4618R TE926+14 TE926+14 RE955 1995-99 RE955 - 330mm 16x1 (socket) 14x1.5 (tre)
LH-BJ4618L 100mm long 100mm long Front
inc. Arm STB8061
7/00-1/01 Maxima A33 RE1050 Front RE1050 - 325mm 16x1 (socket) 14x1.5 (tre)
RH-STB8189
LH-STB8188
2002-03 Maxima A34 TE4871 TE4871 RE4960 Front

RH-STB8189
LH-STB8188
2003-on Maxima J31 TE4941L TE4941R Front

RH-STB7611
LH-STB7610
Rear
STB7612
MICRA
7/95-98 Micra LX Hatch - manual steer TE4811 TE4811 RE7089 RE7089 - 288mm 14x1.5 (socket) 12x1.25 (tre)
(93-on) (93-on)
7/95-98 Micra LX Hatch - power steer TE4811 TE4811 RE913 RE913 - 300mm 16x1 (socket) 12x1.25 (tre)
(93-on) (93-on)
NX
10/91-6/95 NX Coupe RH-BJ504R TE713 TE713 RE913 RE913 - 300mm 16x1 (socket) 12x1.25 (tre)
LH-BJ505L (TE926) (TE926) TE713 - 95mm 12x1.25 RHT Female
inc. Arm 95mm long 95mm long
PINTARA
8/85-12/91 Pintara R31 - imported steering rack BJ274 TE714R TE714R RE859 RE859 - 150mm 16x1 (socket) 14x1.5 (tre)
(TE714P) (TE714P) 150mm male TE714R - 235mm 14x1.5 RHT Female
235mm long 235mm long

KING PIN LINK
SET
YEAR MODEL
6/85-on Pintara R31 - TRW steering rack BJ274 TE714T TE714T RE907TRW RE907TRW - 166mm 16x1.5 (socket) 14x1.5(tre)
(TE714) (TE714) (P191006) TE714T - 221mm 14x1.5 RHT Female
221mm long 221mm long 165mm male
8/89-7/92 Pintara U12 front wheel drive - imported steering rack BJ267 TE665 TE665 RE857 12mm
(BJ555) (TE2225) (TE2225) 12mm thread RE857 - 280mm 16x1.0 (socket) 12x1.25 (tre)
8/89-7/92 Pintara U12 front wheel drive - TRW rack BJ286 TE739 TE739 RE1018 RE1018 - 310mm 16x1.5 (socket) 14x1.5 (tre)
14x1.5 Female 14x1.5 Female (P191013) TE739 - 75mm 14x1.5 RHT Female
PRAIRIE
8/82-86 Prairie M10 BJ304 TE713 TE713 RE857 BJ304 - no thread in bolt mount holes
(BJ242) 12mm thread RE857 - 280mm 16x1.0 (socket) 12x1.25 (tre)
95mm long 95mm long TE713 - 95mm 12x1.25 RHT Female
PULSAR (inc. EXA)

5/78-4/82 Pulsar N10,N11 BJ181 TE563R TE563R RE871 BJ181 - threaded bolt mount holes
Note: some late N10 models are fitted with TE3600R threaded 88mm long 88mm long RE871 - 224mm F17x1.25 (socket) 14x1.25 (tre)
4/82-5/86 Pulsar N12 - imported steering rack BJ304 TE808R TE808R RE857 TR654 BJ304 - no thread in bolt mount holes
(BJ242) (TE664) (TE664) 12mm thread TR4480 - consists of TE664 / RE857
90mm long 90mm long TE808R - 90mm x 12x1.25
4/82-5/86 Pulsar N12 - TRW steering rack BJ304 TE808R TE808R RE906 BJ304 - no thread in bolt mount holes
(BJ242) (TE664) (TE664) (P191001) TE808R - 90mm x 12x1.25
90mm long 90mm long 12mm thread RE906 - 280mm 16x1.5 (socket) 12x1.25 (tre)
5/86-10/91 Pulsar N13 & EXA KN13 power steer BJ261 TE713 TE713 RE857 TR684 TE713 - 95mm 12x1.25 RHT Female
push in 95mm long 95mm long 12mm thread p/steer BJ261 - push in Body dia. 38mm
or or RE857 - 280mm 16x1.0 (socket) 12x1.25 (tre)
RH-BJ506R TR665
LH-BJ507L m/steer
inc. Arm

KING PIN LINK
SET
YEAR MODEL
4/88-on Pulsar N13 power/manual steer - TRW rack BJ261 TE739 TE739 RE905 1991-94 TE739 - 75mm 14x1.5 RHT Female
push in 14x1.5 Female 14x1.5 Female (P191011) Front BJ261 - push in Body dia. 38mm
75mm long 75mm long 14mm thread STB8060 RE905 - 292mm 16x1.5 (socket) 14x1.5 (tre)
10/91-5/96 Pulsar N14 - imported rack BJ4190 TE713 TE713 RE988 TR4740 1991-97 BJ4156/4157 - complete arms
(1990-92) (TE926) (TE926) (RE7092) Front ** these are NOT 'Y' shaped arms ***
BJ4195 95mm long 95mm long 290mm male STB8192 BJ4190 & BJ4195 - check prior to ordering
(1992-on) Rear (approx. only change-over year range listed)
ball joint only STB8062 RE988 - 291mm 16x1 (socket) 12x1.25 (tre)
or TE713 - 95mm 12x1.25 RHT Female
RH-BJ4156
LH-BJ4157
inc. Arm
9/91-10/92 Pulsar N14 - TRW rack BJ4190 TE713 TE713 RE1014 1991-97 BJ4156/4157 - complete arms
ball joint only (TE926) (TE926) (P191027) Front ** these are NOT 'Y' shaped arms ***
or 95mm long 95mm long 300mm male STB8192 RE1014 - 302mm 16x1.5 (socket) 12x1.25 (tre)
RH-BJ4156 Rear TE713 - 95mm 12x1.25 RHT Female
LH-BJ4157 STB8062
inc. Arm
5/96-2000 Pulsar N15 - 1.6L RH-BJ5612R TE713 TE713 RE988 RE988 - 293mm 16x1 (socket) 12x1.25 (tre)
LH-BJ5612L (TE926) (TE926) or RE913 - 300mm 16x1 (socket) 12x1.25 (tre)
inc. Arm (TE3701) (TE3701) RE913 TE713 - 95mm 12x1.25 RHT Female
95mm long 95mm long (RE7093)
5/96-2000 Pulsar N15 - 2.0L RH-BJ5612R TE926+14 TE926+14 RE7081 RE7081 - 290mm 16x1.0 (socket) 14x1.5 (tre)
LH-BJ5612L 100mm long 100mm long 14x1.5
inc. Arm
2000-06 Pulsar N16 - 1.6L BJ4191 TE713 TE713 RE913 TE713 - 95mm 12x1.25 RHT Female
or (TE926) (TE926) (RE7093) RE913 - 300mm 16x1 (socket) 12x1.25 (tre)
RH-BJ9067R+ARM (TE4871) (TE4871) BJ4191 - Ball Joint Only - Press In
LH-BJ9068L+ARM 95mm long 95mm long
2000-06 Pulsar N16 - 2.0L BJ4191 TE926+14 TE926+14 RE7423 TE926 - 95mm long
or 100mm long 100mm long 14X1.5 BJ4191 - Ball Joint Only - Press In
RH-BJ9067R+ARM RE7423 - 302mm 16x1.0 (socket) 14x1.5 (tre)
LH-BJ9068L+ARM
SERENA
1991-on Serena AC23 TE980 TE980 RE955 RE955 - 330mm 16x1 (socket) 14x1.5 (tre)
SKYLINE
1977-81 Skyline C210 sedan & coupe BJ151 SX4254 TE520L TE520L TE521R TE521R TR656 TR417 TR656 - consists of TE520L / TE521R / AS656

KING PIN LINK
SET
YEAR MODEL
Adjusting sleeve - AS656 (18x1.5) 100mm o/all lgth

8/81-7/85 Skyline R30 sedan & hatch RH - BJ515 SX1232 TE668 TE668 TE669 TE669 TR426 TE668 - 97mm 14.1.5 BLD 13.82mm
LH - BJ516 NLA
or idler arm LH Thread LH Thread
RH-BJ515R
LH-BJ516L
inc. Arm
1986-8/89 Skyline R31 - imported steering rack BJ274 TE714R TE714R RE859** TR4620 TE714R - 235mm 14x1.5 RHT Female
(40160-41L00) (TE714P) (TE714P) 150mm ** Rack end - For Skyline full import GTS
235mm long 235mm long or use RE955
RE955** RE859 - 150mm 16x1 (socket) 14x1.5 (tre)
330mm RE955 - 330mm 16x1 (socket) 14x1.5 (tre)
1986-8/89 Skyline R31 - TRW steering rack BJ274 TE714T TE714T RE907TRW RE907TRW - 166mm 16x1.5 (socket) 14x1.5(tre)
(40160-41L00) (TE714) (TE714) (P191006) TE714T - 221mm 14x1.5 RHT Female
9/89-93 Skyline R32 2WD LH-SA625L BJ291 TE926+14 TE926+14 RE752 TE926+14 will not suit GTR-ST - taper different
RH-SA625R (BJ6001) (TE7125) (TE7125) (RE4760) BJ291 - will not suit for 4WD (40160-05U00)
(40160-01U01) 100mm long 100mm long (RE7096) RE752 - 280mm 16x1 (socket) 14x1.5 (tre)
41mm OD BJ5515 - GTS only
and BJ5515 - approx 30mm OD body toward top - tapered
BJ5515 RE762 BJ5515 & RE762 - Hicas Rear Steering

(55154-39F00) rear BJ291 - suits front & rear lower control arms
(REAR) BJ5515 - suits for Rear Hicas Ball Joint
1989-92 Skyline R32 4WD LH-SA625L BJ492 TE926+14 TE926+14 RE4710 - 258mm TE926+14 will not suit GTR-ST - taper different
RH-SA625R (TE7125) (TE7125) RE752 - 280mm BJ291 - will not suit for 4WD (40160-05U00)
100mm long 100mm long front RE4710 - 258mm 16x1 (socket) 14x1.5 (tre)
RE858 RE752 - 289mm 16x1(socket) 14x1.5(tre)
rear
8/1993-98 Skyine R33 2WD BJ291 TE926+14 TE926+14 BJ291 - suits front & rear lower control arms
(BJ6001) (TE7125) (TE7125) BJ5515 - approx 30mm OD body toward top - tapered
(40160-01U01) 100mm long 100mm long BJ5515 - suits for Rear Hicas Ball Joint
41mm OD
and
BJ5515
(55154-39F00)
(REAR)

KING PIN LINK
SET
YEAR MODEL
8/1993-98 Skyine R33 4WD BJ492 TE926+14 TE926+14 RE4710 RE4710 - 258mm 16x1.0 (socket) 14x1.5 (tre)
(TE7125) (TE7125)
5/1998-2002 Skyline R34 2WD TE926+14 TE926+14 RE7081 RE7081 - 290mm 16x1.0 (socket) 14x1.5 (tre)
(TE7125) (TE7125)
5/1998-2002 Skyline R34 4WD TE926+14 TE926+14 RE4710 RE4710 - 258mm 16x1.0 (socket) 14x1.5 (tre)
(TE7125) (TE7125)
STANZA
1977-81 Stanza A10 series inc. Violet BJ163 SX1136 TE518L TE518R TE519R TE519L RH-TR634 see TR558 If TRW rack present - no inners etc. required.
77mm long with bend 107mm long with relief bend LH-TR633 Drag Link Instead use rack end P189014
2 bolt mount
6/81-85 Stanza T11 series RH-BJ240R TE518L TE518R TE519R TE519L TR654 TR4480 - consists of TE664 / RE857
LH-BJ240L 77mm long with bend 107mm long with relief bend (TR4480)
10/85-on Stanza T12, T12Y BJ241 TE665 TE665 TR683

90mm long 90mm long
SUNNY
1971-77 Sunny PB110, PB210, GB211 BJ85 SX1121 TE437L TE437R TE438R TE438L RH-TR655R TR413R - consists of TE437R / TE438L / CR655
14mm thread 14mm thread (TE603R) (TE603L) (TR413R) Cpmmecting rod - CR655 (14x1.5) 166mm o/all lgth
LH Thread RH Thread RH Thread LH Thread LH-TR655L TE437 - 83mm 14x1.5 female BLD 13.2mm
83mm long 83mm long 116mm long 116mm long (TR414L) TE438 - 116mm 14x1.5 female BLD 13.2mm bend
1978-82 Sunny B310 1.2lt - models with BJ176 SX1136 TE518L TE518R TE519R TE519L RH-TR634 TR558
12mm ball joint mount bolts (short) 77mm long with bend 107mm long with relief bend LH-TR633
2 bolt mount
1978-82 Sunny B310 1.4lt, 1.5lt - models with BJ163 SX1136 TE518L TE518R TE519R TE519L RH-TR634 TR558
10mm ball joint mount bolts 77mm long with bend 107mm long with relief bend LH-TR633
(long) 2 bolt mount
SYLVIA - see GAZELLE
Tiida
12/05-on Tiida C11 BJ4952 TE4951L TE4951R RE4950
p/steer

KING PIN LINK
SET
YEAR MODEL
Z series - see 240Z,260Z,280ZX,300ZX
NISSAN - Commercial
1000 UTILITY
outer's have 12mm thread 12mm thread 12mm thread
outer's have 14mm thread 14mm thread 14mm thread TE437 - 83mm 14x1.5 female BLD 13.2mm
LH Thread RH Thread
1200 UTILITY
1974-76 Datsun 1200 Ute 120Y, UB210 300kg BJ92 SX1136 TE518L TE518R TE519R TE519L TR412 BJ92 mounting holes 41mm
77mm long with bend 107mm long with relief bend centre-to-centre
1976-78 Datsun 1200 Ute 120Y, UB210 300kg BJ176 SX1136 TE518L TE518R TE519R TE519L RH-TR433 TR412 BJ176 mounting holes 51mm
4 bolt mount 77mm long with bend 107mm long with relief bend LH-TR434 centre-to-centre
1978-on Datsun 1200 Ute TE518L TE518R TE519R TE519L TR409

300C - see NISSAN 240C,260C,280C,300C DATSUN
320, 520, 620, 720, 2WD

1963-72 Datsun 320, 520 & 521 Ute 2WD KX230 SX1151 TE671L TE671R RH-TR433 RH-TE546L Upper inner arm repair kit - SX1120A
LH-TR434 LH-TE545R King pin set - 0.787" x 4.560" (20x116mm)
1972-8/77 Datsun 620 Ute 2WD KX260 SX1151 TE546L TE545R RH-TR433 TE432R&L can be used to
LH-TR434 replace ends on centre rod
9/77-9/79 Datsun 620 Ute 2WD BJ205 RH-BJ206 SX1152 TE546L TE545R RH-TR433 TE432R&L can be used to
LH-BJ207 LH-TR434 replace ends on centre rod
BJ206 - 4 bolt mount
9/79-3/83 Datsun 720 2WD BJ205 RH-BJ206 SX1153 TE6041 TE6041 TE6042 TE6042 TR661 TR614 TE6041 - replaces TE604R(OEM) & TE604L(RSV)
LH-BJ207 'short' with LH Thread 'long' with RH Thread TE6042 - replaces TE604L(OEM) & TE604R(RSV)
M18x1.5 LHT M18x1.5 LHT M18x1.5 RHT M18x1.5 RHT TR614 - 740mm c/c ball studs & 525mm c/c holes
4/83-85 Datsun 720 2WD BJ205 RH-BJ206 SX1223 TE6041 TE6041 TE6042 TE6042 TR661 TR679 TE6041 - replaces TE604R(OEM) & TE604L(RSV)
LH-BJ207 (SX4223R) 'short' with LH Thread 'long' with RH Thread TE6042 - replaces TE604L(OEM) & TE604R(RSV)
ref. 48521-01W00 ref. 48520-01W00 BJ205 - 4 bolt mount BLD 16mm

720 (4WD)
4/80-3/83 Nissan 720 4WD BJ205 RH-BJ206 SX1217 TE6041 TE6041 TE674R** TE674R** TR663 TR681 **Tie rod ends - check dimensions
LH-BJ207 NLA 'short' with LH Thread 18mm thread 18mm thread NLA TE6041 - replaces TE604R(OEM) & TE604L(RSV)

KING PIN LINK
SET
YEAR MODEL
ref. 48521-01W00 TR681 - 734mm c/c ball studs - tapered holes

M18x1.5 LHT M18x1.5 LHT TR681 - 630mm c/c b/w tapered holes
4/83-85 Nissan 720 4WD - manual steer BJ205 BJ2029 SX1224 TE675L TE675R TE676R TE676L RH-TR664R SX1226 SX1224 - 2 bolt mount with ball stud end
(BJ222) (SX1309) LH Thread RH Thread LH-TR664L (SX4560) SX1224 - 108mm c/c b/w mount holes
LH Thread RH Thread BJ205 - 4 bolt mount BLD 16mm
2 bolt mount 110mm 110mm 160mm 160mm
4/83-85 Nissan 720 4WD - power steer BJ205 BJ2029 SX1225 TE675L TE675R TE676R TE676L RH-TR664R SX1227 BJ205 - 4 bolt mount BLD 16mm
(BJ222) (SX1308) LH Thread RH Thread LH-TR664L (SX4561)
LH Thread RH Thread
110mm 110mm 160mm 160mm
C20 - see VANETTE
CABALL
1967-72 Caball C240 2ton KX252 TE984 TE979 King pin set - 25 x 168mm
(TE473L) (TE473R) Tie rod end config. different on some models - check thread
M22x1.5 LHT M22x1.5 RHT
CABSTAR
3/76-4/78 Cabstar F20, F21 BJ138 BJ140 TE502L TE502R RH-TR636 TE502L&R - 211mm M20x1.5 with bend
(BJ183) (BJ184) (TE570L) (TE570R) LH-TR635
4/78-81 Cabstar F21 BJ138 BJ140 TE502L TE502R RH-TR516 TE502L&R - 211mm M20x1.5 with bend
(BJ183) (BJ184) (TE570L) (TE570R) LH-TR517
1982-86 Cabstar PF22, EF22 BJ205 RH-BJ206 RH-TR516 BJ205 - 4 bolt mount BLD 16mm
LH-BJ207 LH-TR517
all Cabster FGH40, KMH40 KX266 King pin set - 25 x 172mm
DX, ST UTILITY (rebadged FALCON)

KING PIN LINK
SET
YEAR MODEL
1988-90 DX Ute - manual steer BJ94 BJ75 SX1119 TE548R TE548R TE549L TE549L SX809 Spring saddle (rubber) - XR3388A (single)
(18901) Camber pin kit - F67
1988-90 ST Ute - power steer BJ94 BJ75 SX1119 TE548R TE548R TE549L TE549L SX809B Spring saddle (rubber) - XR3388A (single)
(18902) Camber pin kit - F67
E20 - see URVAN
ESCARGO
ESCARGO TE808R TE808R TE808R - 90mm x 12x1.25
(TE664) (TE664)
HOMER
1969-76 Homer T20, T640, T641 BJ138 BJ140 TE502L TE502R RH-TR516
(BJ183) (BJ184) (TE570L) (TE570R) LH-TR517
3/76-4/78 Homer F20, F21 BJ138 BJ140 TE502L TE502R RH-TR636

(BJ183) (BJ184) (TE570L) (TE570R) LH-TR635
4/78-1982 Homer F20, F21, F22 BJ205 RH-BJ206 TE502L TE502R RH-TR516 BJ205 - 4 bolt mount BLD 16mm
LH-BJ207 (TE570L) (TE570R) LH-TR517
1982-87 H40 TE984 TE979 Tie rod end config. different on some models - check thread
(TE473L) (TE473R)
MURANO
5/05-on Murano 4WD RE6795 Front RE6795 - 285mm 16x1.0 (socket) 14x1.5 (tre)
RH-STB7621
LH-STB7620
Rear
RH-STB7623
LH-STB7622
NAVARA (2WD)
1/86-3/97 Navara D21 series BJ205 BJ244 SX4219 TE672L TE672L TE673R TE673R TR662 TR680 Front BJ244 - press in Body dia. 52mm BLD 19.65mm
(SX1219) 8/85-90 BJ205 - 4 bolt mount BLD 16mm
STB8068
3 bolt mount 92-on

KING PIN LINK
SET
YEAR MODEL
STB8116
4/97-11/05 Navara D22 series BJ4821 BJ244 SX4219 TE4821 TE4821 TE4822 TE4822 TR4820 Tie Rod Ends - Check Threads - various
press in (SX1219) Male LHT Male LHT RH Thread RH Thread arrangements have been identified.
M18x1.5 M18x1.5 Male Male BJ244 - press in Body dia. 52mm BLD 19.65mm
3 bolt mount
4/97-11/05 Navara D22 Pickup/Utility BJ4821 BJ244 SX4219 TE4831 TE4831 TE4832 TE4832 Tie Rod Ends - Check Threads - various
press in (SX1219) RH Thread RH Thread LH Thread LH Thread arrangements have been identified.
Female Female Female Female BJ244 - press in Body dia. 52mm BLD 19.65mm
3 bolt mount
9/05-09 Navara D40 BJ4981 BJ4982 TE4981L TE4981R RE6671 BJ4982 - small OD (43.25mm) - if larger OD
43.25mm OD p/steer - suit Vin VSK# Built in Spain (16x1.5) required see BJ4992 (45.15mm)
16x1.5 Built in Spain or RE6671 - 218mm 20x1.0 (socket) 16x1.5 (tre)
RE6505 RE6505 - 218mm 16x1.5 (socket) 14x15. (tre)
14x1.5 Built in Thailand - TBA suit Vin MNT# Built in Thailand (5/08-on) (14x1.5)
09-on Navara D40 BJ4982

43.25mm OD
sx4219 bj205 bj4821
te4821 te4822 te4831
NAVARA (4WD)
8/85-90 Navara D21 series BJ205 BJ2029 SX4221 TE703R TE703R TE704L TE704L TR677 TR4680 Front SX4221 - 3 mounting holes
(BJ222) (SX1221) (TE703) (TE703) (TE704) (TE704) (TR678) 8/85-90 TR4680 - 790mm overall length
RH Thread RH Thread LH Thread LH Thread STB8068 BJ205 - 4 bolt mount BLD 16mm
3 bolt mount
1990-8/92 Navara D21 series BJ205 BJ2029 SX4221 TE704L TE703R TE703R TE704L TR677 TR4680 Front Tie Rod Ends - if taper on TE703/TE704

KING PIN LINK
SET
YEAR MODEL
(BJ824) (BJ222) (SX1221) (TE704) (TE703) (TE703) (TE704) (TR678) 8/85-90 is too small - use TE751/TE752
(BJ825) BLD-13.3mm BHD-15mm BLD-13.3mm BHD-15mm TR4680 only suits TE703/TE704 tie rod ends STB8068 BJ2029 - 4 bolt mount BLD 19.64mm
3 bolt mount or or or or or 92-on TE751 - 127mm 16x1.5 BLD 14.5mm
TE752 TE751 TE751 TE752 TR4680N STB8116 TE752 - 127mm 16x1.5 BLD 14.5mm
(TE4752) (TE4751) (TE4751) (TE4752) (TR5625) NOTE - TRW/OEM used to reference
BLD-14.5mm BHD-16mm BLD-14.5mm BHD-16mm TR4680N only suits TE751/TE752 tie rod ends TE751 for Toyota Camry - confirm vehicle
LH Thread RH Thread RH Thread LH Thread application if ordered by part number
9/92-4/97 Navara D21 series BJ205 BJ2029 SX4221 TE752 TE751 TE751 TE752 TR4680N SX8525 Front Tie Rod Ends - Check Threads - various
(BJ824) (BJ222) (SX1221) (TE4752) (TE4751) (TE4751) (TE4752) (TR5625) to 8/93 8/85-90 arrangements have been identified.
(BJ825) BLD-14.5mm BHD-16mm BLD-14.5mm BHD-16mm STB8068 BJ2029 - 4 bolt mount BLD 19.64mm
3 bolt mount LH Thread RH Thread RH Thread LH Thread SX8526 92-on TE751 - 127mm 16x1.5 BLD 14.5mm
9/93-on STB8116 TE752 - 127mm 16x1.5 BLD 14.5mm
4/97-11/05 Navara D22 series BJ4821 BJ4802 SX2625 TE4832 TE4831 TE4831 TE4832 TR2625 Tie Rod Ends - Check Threads - various
(BJ4832) idler arm LH Thread RH Thread RH Thread LH Thread (TR2265) arrangements have been identified.
press in Female 95mm Female 95mm Female 95mm Female 95mm connects steering box to idler BJ4802 - Body OD 43.05mm screw on nut
2006-08 Navara D22 series BJ4821 BJ4802 SX2625 TE4831 TE4831 TE4832 TE4832 TR2625
press in idler arm RH Thread RH Thread LH Thread LH Thread (TR2265)
9/05-on Navara D40 BJ4991 BJ4992 TBA TBA RE6671 RE6671 - 218mm 20x1.0 (socket) 16x1.5 (tre)
(thread) (spigot) p/steer - suit Vin VSK# Built in Spain (16x1.5) RE6505 - 218mm 16x1.5 (socket) 14x15. (tre)
42.10mm OD 45.15mm OD or Coil Strut Spacer 25mm - CSSNAV25
RE6505 Coil Strut Spacer 35mm - CSSNAV35
suit Vin MNT# Built in Thailand (5/08-on) (14x1.5) Recovery Tow Point - RPNAV40
07-on Navara D40T BJ4981 BJ2524 TE2518L TE2518R RE2585
BLD 14.94 (spigot)

43.2mm OD
bj205 bj4821 bj2029 bj4802

KING PIN LINK
SET
YEAR MODEL
NOMAD
6/81-8/85 Nomad WSC22 BJ210 BJ211 SX1156 TE3647R TE3647L TE3649L TE3649R RH-TR446 TR4640 DL302 DL302 - manual steering only
3 bolt mount 85mm long 85mm long 108mm long 108mm long LH-TR447 (TR430) DL302 - overall length 840mm
840mm
9/85-88 Nomad CG22 BJ210 BJ211 SX4263 TE3647R TE3647L TE3649L TE3649R RH-TR446 TR4640 DL302 DL302 - manual steering only
3 bolt mount 85mm long 85mm long 108mm long 108mm long LH-TR447 (TR430) DL302 - overall length 840mm
840mm
12/86-9/99 Nomad C22, C23 Wagon, Seriena, Vanette BJ211
PATHFINDER / TERRANO
8/86-93 Pathfinder WD21, VD21 4WD BJ205 BJ2029 SX4221 TE703R TE703R TE704L TE704L TR677 TR4680 Front BJ205 - 4 bolt mount BLD 16mm
(BJ222) (SX1221) (TE703) (TE703) (TE704) (TE704) (TR678) STB8190
RH Thread RH Thread LH Thread LH Thread Rear
3 bolt mount STB8115
9/92-10/95 Pathfinder HYD21 4WD BJ205 BJ2029 SX4221 TE751 TE751 TE752 TE752 TR4680N Tie Rod Ends - Check Threads - various
(BJ824) (BJ222) (SX1221) (TE4751) (TE4751) (TE4752) (TE4752) (TR5625) arrangements have been identified.
(BJ825) (TE985) (TE985) (TE982) (TE982) BJ2029 - 4 bolt mount BLD 19.64mm
4 bolt mount 3 bolt mount RH Thread RH Thread LH Thread LH Thread TE751 - 127mm 16x1.5 BLD 14.5mm
TE752 - 127mm 16x1.5 BLD 14.5mm
11/95-6/05 Pathfinder R50 4WD not required BJ815 TE4831 TE4831 RE7424 1996-01 Strut Front End - no upper ball joint required
(BJ2483) (TE2480) (TE2480) (RE2483) Front RE7424 - 345mm 20x1.5 (socket) 14x1.5 (tre)
3 bolt mount (TE4352) (TE4352) STB8114
95mm female RHT Rear
STB8115
2002-on
Front
STB8191
Rear

KING PIN LINK
SET
YEAR MODEL
STB8115
7/05-on Pathfinder R51 4WD BJ4981 BJ4992 TE4981L TE4981R RE6671 RE6671 - 218mm 20x1.0 (socket) 16x1.5 (tre)
- not R51M - press in p/steer - suit Vin VSK# Built in Spain (16x1.5) RE6505 - 218mm 16x1.5 (socket) 14x15. (tre)
(spigot) 16x1.5 Built in Spain or
45.15mm OD RE6505
14x1.5 Built in Thailand - TBA suit Vin MNT# Built in Thailand (5/08-on) (14x1.5)
PATROL (Safari)
1965-80 Patrol G60 series 4WD TE984 TE984
LEAF FRONT - LEAF REAR (TE473L) (TE473L)
22mm LH Thread 22mm LH Thread
4/80-10/87 Patrol MQ/MK 4WD - manual steer SX417 TE3664R TE984 TR411 DL300 SX5310 TE3664R - has hole to accept drag link
LEAF FRONT - LEAF REAR steering drag link hole (TE473L) Relay Rod (DL680)
idler kit 22mm LH Thread 322mm 705mm
or has hole
TE1403 (no pin to damper)
12/82-on - 25mm
4/80-10/87 Patrol MQ/MK 4WD - power steer SX417 TE3664R TE984 TR423 DL300 SX5311 TE3664R - has hole to accept drag link
LEAF FRONT - LEAF REAR steering drag link hole (TE473L) (TR560) (DL680)
idler kit 22mm LH Thread Relay Rod 705mm
or 322mm
TE1403 has pin
12/82-on - 25mm
11/87-10/91 Patrol GQ Y60 4WD - UTE / TRAY TE3664R TE1403 TR423 DL300 SX5307 Rear Only TR423 - relay rod 322mm has pin for damper
LEAF FRONT - LEAF REAR drag link hole 25mm LH Thread Relay Rod (DL680) p/steer STB7632 STB7632 - 12mm stud if 10mm stud needed see STB8192
long (228mm) short (170mm) 705mm or (12mm stud) 1/2" Drive Hub Socket GQ 54mm - 4H500
MALE MALE 322mm SX5308 standard Swivel Hub Repair Kit - SHBKT13B
has pin m/steer or Radius Arm to Chassis Rubber Bush - S0500R
STB8828 Radius Arm to Diff Rubber Bush - S0501R
extended to Transmission Spacer Kit - GQTSK
suit 200mm Recovery Tow Point - RPPAT01
lift
Leaf Front has Straight Bolt

KING PIN LINK
SET
YEAR MODEL
11/87-6/92 Patrol GQ Y60 4WD - WAGON TE984 TE979 DL700S SX5306 F&R Adjustable Panhard Rod front - APR004
COIL FRONT - COIL REAR (TE473L) (TE473R) adjustable m/steer STB7632 Adjustable Panhard Rod rear - APR005
22mm LH Thread 22mm RH Thread (12mm stud) Rear Lower Trailing Arm +11mm - NPTA11B
MALE MALE DL700SHD or Rear Lower Trailing Arm +16mm - NPTA16B
34mm OD Rod STB8192 Rear Upper Trailing Arm Adjustable - NPTA43B
Female Ends (10mm stud) Rear Upper T/Arm Long Range Tank & 2" lift - NPTA47B
standard Rear Trailing Arm Rubber Bush - S0498R
DL704 or 1/2" Drive Hub Socket GQ 54mm - 4H500
Track Rod STB8828 Swivel Hub Repair Kit - SHBKT13B
runs behind extended to Radius Arm to Chassis Rubber Bush - S0500R
front diff suit 200mm Radius Arm to Diff Rubber Bush - S0501R
lift Panhard Rod Rubber Bush GQ - Diff End - S0502R
GQ Panhard Rod Rubber Bush - Chassis End - S0503R
Drop Box - LHS - GUDBL

Drop Box - RHS - GUDBR
Transmission Spacer Kit - GQTSK
Recovery Tow Point - RPPAT01
7/92-on Patrol GQ Y60 DX 4WD - WAGON Complete Track Rod to TE135L TE135R DL700S F&R Adjustable Panhard Rod front - APR004
Patrol GQ Y60 4WD - TRAY suit GQ Y60 up to 5/01 female 123mm female 123mm adjustable STB7632 Adjustable Panhard Rod rear - APR005
COIL FRONT - COIL REAR (coil/coil wagon & ute) LH Thread RH Thread (12mm stud) Rear Lower Trailing Arm +11mm - NPTA11B
DL700SHD or
and GU Y61 6/01 to FEMALE FEMALE Rear Lower Trailing Arm +16mm - NPTA16B
34mm OD Rod STB8192 Rear Upper Trailing Arm Adjustable - NPTA43B
current (coil front).
Female Ends (10mm stud) Rear Upper T/Arm Long Range Tank & 2" lift - NPTA47B
standard Rear Trailing Arm Rubber Bush - S0498R
Track Rod (also known DL704 or 1/2" Drive Hub Socket GQ 54mm - 4H500
as Tie Rod) runs Behind Track Rod STB8828 Swivel Hub Repair Kit - SHBKT13B (for 54mm Hub Tool)
the Front Diff & is runs behind extended to Radius Arm to Chassis Rubber Bush - S0500R
supplied complete with front diff suit 200mm Radius Arm to Diff Rubber Bush - S0501R
HD Tie Rod Ends. lift Panhard Rod Rubber Bush GQ - Diff End - S0502R
Part Numbers: Drop Box - LHS - GUDBL

DL704 - GQ
DL706 - GU

KING PIN LINK
SET
YEAR MODEL
8/93-98 Patrol GQ Y60 4WD - WAGON

DL706 - GU TE984 TE979 DL700S SX5309 F&R Tie Rod Ends - Wagon only
COIL FRONT - COIL REAR (TE473L) (TE473R) adjustable STB7632 Adjustable Panhard Rod front - APR004
22mm LH Thread 22mm RH Thread (12mm stud) Adjustable Panhard Rod rear - APR005
MALE MALE DL700SHD or Rear Lower Trailing Arm +11mm - NPTA11B
34mm OD Rod STB8192 Rear Lower Trailing Arm +16mm - NPTA16B
Female Ends (10mm stud) Rear Upper Trailing Arm Adjustable - NPTA43B
standard Rear Upper T/Arm Long Range Tank & 2" lift - NPTA47B
DL704 or Rear Trailing Arm Rubber Bush - S0498R

Track Rod STB8828 1/2" Drive Hub Socket GQ 54mm - 4H500
runs behind extended to 1/2" Drive Hub Socket late GQ Pins - 4H501
front diff suit 200mm Swivel Hub Repair Kit - SHBKT13B (for 54mm Hub Tool)
lift Radius Arm to Chassis Rubber Bush - S0500R
Radius Arm to Diff Rubber Bush - S0501R
Panhard Rod Rubber Bush GQ - Diff End - S0502R
Drop Box - LHS - GUDBL

11/99-on Patrol GQ Y60 4WD - TRAY TE4891L TE4891R DL700S F&R Adjustable Panhard Rod front - APR004
COIL FRONT - LEAF REAR male 20x1.5 male 20x1.5 adjustable STB7632 1/2" Drive Hub Socket GQ 54mm - 4H500
LH Thread RH Thread (12mm stud) 1/2" Drive Hub Socket late GQ Pins - 4H501
MALE MALE DL700SHD or Swivel Hub Repair Kit - SHBKT13B (for 54mm Hub Tool)
34mm OD Rod STB8192 Radius Arm to Chassis Rubber Bush - S0500R

Female Ends (10mm stud) Radius Arm to Diff Rubber Bush - S0501R
standard Panhard Rod Rubber Bush GQ - Diff End - S0502R
DL704 or GQ Panhard Rod Rubber Bush - Chassis End - S0503R
Track Rod STB8828 Drop Box - LHS - GUDBL

runs behind extended to Drop Box - RHS - GUDBR
front diff suit 200mm Transmission Spacer Kit - GQTSK
lift Recovery Tow Point - RPPAT01
10/97-5/01 GU Y61 - series 1 TE4891L TE4891R DL710S SX8524 Front Std. Adjustable Panhard Rod front - APR004
male 20x1.5 male 20x1.5 adjustable STB7632 Adjustable Panhard Rod rear - APR005
LH Thread RH Thread (12mm stud) Rear Lower Trailing Arm +11mm - NPTA11B
MALE MALE Rear Std. Rear Lower Trailing Arm +16mm - NPTA16B
DL706 RH-STB7634 Rear Upper Trailing Arm Adjustable - NPTA43B
Track Rod LH-STB7633 Rear Upper T/Arm Long Range Tank & 2" lift - NPTA47B
runs behind (10mm stud) Rear Trailing Arm Rubber Bush - S0498R
front diff 1/2" Drive Hub Socket late GQ Pins - 4H501
EXTENDED Radius Arm to Chassis Rubber Bush - S0500R
to suit Radius Arm to Diff Rubber Bush - S0501R
200mm lift Panhard Rod Rubber Bush GQ - Diff End - S0502R
Front & GQ Panhard Rod Rubber Bush - Chassis End - S0503R
RH Rear Drop Box - LHS - GUDBL

KING PIN LINK
SET
YEAR MODEL
STB8828 Drop Box - RHS - GUDBR

LH Rear Radius Arm Spacer Washer Kit - RASWNIS
STB8833 Rear Door Wheel Mount Assy Kit - GUWMA
6/01-8/04 GU Y61 - series 2

Complete Track Rod to TE8520L TE8520R DL710S SX8524 Front Std. Adjustable Panhard Rod front - APR028
suit GQ Y60 up to 5/01 female 120mm female 120mm adjustable STB7632 Adjustable Panhard Rod rear - APR029
(coil/coil wagon & ute) LH Thread RH Thread (12mm stud) Rear Lower Trailing Arm +11mm - NPTA11B
and GU Y61 6/01 to FEMALE FEMALE Rear Std. Rear Lower Trailing Arm +16mm - NPTA16B
current (coil front). DL706 RH-STB7634 Rear Upper Trailing Arm Adjustable - NPTA43B
Track Rod (also known runs behind (10mm stud) Rear Trailing Arm Rubber Bush - S0498R
as Tie Rod) runs Behind front diff 1/2" Drive Hub Socket late GQ Pins - 4H501
the Front Diff & is
supplied complete with 200mm lift Drop Box - LHS - GUDBL
HD Tie Rod Ends. Front & Drop Box - RHS - GUDBR
RH Rear Radius Arm Spacer Washer Kit - RASWNIS
Part Numbers: STB8828 Rear Door Wheel Mount Assy Kit - GUWMA
LH Rear Recovery Tow Point - RPPAT01
DL704 - GQ STB8833 NOTE - some GUII cab/chassis has the
Series 1 Chassis - so the correct APR will
DL706 - GU be APR004 & APR005. Check if
Cab/Chassis before ordering.
8/04-06 GU Y61 - series 3 &4 TE8570L TE8570R DL710S SX8524 Front Std. Adjustable Panhard Rod front - APR028
female 135mm female 135mm adjustable STB7632 Adjustable Panhard Rod rear - APR029
LH Thread RH Thread (12mm stud) Rear Lower Trailing Arm +11mm - NPTA11B
FEMALE FEMALE Rear Std. Rear Lower Trailing Arm +16mm - NPTA16B
DL706 RH-STB7634 Rear Upper Trailing Arm Adjustable - NPTA43B
runs behind (10mm stud) Rear Trailing Arm Rubber Bush - S0498R
front diff 1/2" Drive Hub Socket late GQ Pins - 4H501
200mm lift Drop Box - LHS - GUDBL
Front & Drop Box - RHS - GUDBR
RH Rear Radius Arm Spacer Washer Kit - RASWNIS
STB8828 Rear Door Wheel Mount Assy Kit - GUWMA
LH Rear Recovery Tow Point - Series 3 - RPPAT01
STB8833 Recovery Tow Point - Series 4 - RPPAT04

KING PIN LINK
SET
YEAR MODEL
te984 te979
te473l te1403
te4891l te8520l te8570l

te135l
sx5306 sx5307

KING PIN LINK
SET
YEAR MODEL
PULSAR VAN
1982-on Pulsar Van VB11 500kg BJ304 TE808R TE808R TR654 BJ304 - 3 bolt mount
(BJ242) (TE664) (TE664) TE808R - 90mm x 12x1.25
SUNNY
1966-70 Sunny Truck B20 BJ89 BJ91 TE187L TE187R TE183R TE183L
1971-75 Sunny Truck B120 BJ92 SX1135 TE440L TE440R TE4092L TE4092R RH-TR659R TR409
77mm long straight LH-TE659L
10/75-on Sunny Truck B120, B121, B122 BJ176 SX1135 TE518L TE518R TE519R TE519L RH-TR660R TR409
77mm long with bend 107mm long with relief bend LH-TR660L
1978-83 Sunny Van VB310 350kg BJ176 SX1136 TE518L TE518R TE519R TE519L TR558
TERRANO - see PATHFINDER
TRUCK
1971-75 Junior 140,N140 (1600) 30cwt truck BJ138 BJ140
(BJ183) (BJ184)
1972-on Nissan UG780 / TK10 KX123
Nissan UD Truck CMA86 & 87 KX133
1979-on Nissan UD Truck CD50/51, CW50/51, PD, RD TE677L TE677R
Nissan CU40 / CD KX136
1979-84 CWA45, CW40, CK11, GVW 24000kg KX264 King pin set - 47 x 239mm

KING PIN LINK
SET
YEAR MODEL
URVAN
74-11/75 Urvan E20 BJ138 BJ140 TE502L TE502R RH-TR636
(BJ183) (BJ184) (TE570L) (TE570R) (TR636R)
LH-TR635
(TR635L)
11/75-78 Urvan E20, E21, E22, E23 BJ138 BJ140 TE502L TE502R RH-TR636 TR636 - 420mm long
(BJ183) (BJ184) (TE570L) (TE570R) (TR636R) TR635 - 420mm long
LH-TR635
(TR635L)
1978-86 Urvan E20, E21, E22, E23 BJ205 RH-BJ206 TE502L TE502R RH-TR516 TR516 - 390mm long
LH-BJ207 (TE570L) (TE570R) (TR638R) TR517 - 390mm long
LH-TR517 BJ205 - 4 bolt mount BLD 16mm
(TR637L)
1987-93 Urvan E24 2WD BJ205 BJ244 TE859 TE858 TE858 TE859 TR445 TR429 DL301 TE859 - LH thread
NLA NLA NLA TE858 - RH thread
LH Thread RH Thread RH Thread LH Thread BJ244 - press in Body dia. 52mm BLD 19.65mm
BJ205 - 4 bolt mount BLD 16mm
2001-on Urvan E25 BJ4972 TE4971 TE4971 RE4970
VANETTE, C20
1968-76 Vanette C80, SC80 series 3500kg KX251 TE437L TE437R King pin set - 30 x 183mm
LH Thread RH Thread TE437 - 83mm 14x1.5 female BLD 13.2mm
1975-78 Vanette C20, C21 BJ208 BJ209 SX1154 TE187R TE187R TE187L TE187L TR610 DL400 BJ208 - 2 bolt mount
NLA
10/78-6/81 Vanette C120, C121 excl. Z/LD20 BJ208 BJ211 SX1155 TE437R TE437L TE438L TE438R RH-TR612 TR407 DL401 TE437 - 83mm 14x1.5 female BLD 13.2mm
RH Thread LH Thread LH Thread RH Thread LH-TR613 TE438 - 116mm 14x1.5 female BLD 13.2mm bend

KING PIN LINK
SET
YEAR MODEL
6/81-9/85 Vanette C120, C122 incl. Z/LD20 BJ210 BJ211 SX1156 TE437R TE437L TE438L TE438R RH-TR612 TR407 DL401 TE437 - 83mm 14x1.5 female BLD 13.2mm
3 bolt mount RH Thread LH Thread LH Thread RH Thread LH-TR613 TE438 - 116mm 14x1.5 female BLD 13.2mm bend
740mm 400mm
9/85-93 Vanette C22 BJ210 BJ211 SX4263 TE3647R TE3647L TE3649L TE3649R RH-TR446 TR4640 DL302 DL302 - overall length 840mm - m/steer only
3 bolt mount 85mm long 85mm long 108mm long 108mm long LH-TR447 (TR430) m/steer only check tie rod end orientation prior to ordering
length 840mm
1993-on Vanette TE713 TE713 TE713 - 95mm 12x1.25 RHT Female

(TE926) (TE926)
X TRAIL
10/01-06 X Trail - T30 TE4831 TE4831 RE4910 Front
(TE873) (TE873) RH-STB8232
95mm Female RHT LH-STB8231
07-on X Trail - T31, T31N BJ4942 TE8400L TE8400R RE7423 RE7423 - 302mm 16x1.0 (socket) 14x1.5 (tre)
or RE7425 - 246mm 22x1.5 (socket) 14x1.5 (tre)
RE7425 Check Rack End Dimensions Before Ordering
OLDSMOBILE
1941-60 Oldsmobile - all models KX26 TE52R TE52R
1961-72 Cutlass, Cutlass Supreme Classic, BJ54 BJ55 or TE52R TE52R

F85, Vista Cruiser, Calais BJ55OS
(oversize)
1973-74 Omega BJ54 BJ55 or TE52R TE52R

BJ55OS
(oversize)
1973-88 Cutlass, Cutlass Supreme Classic, BJ487 BJ488 18765 TE2019R TE2019R TE2020L TE2020L
F85, Vista Cruiser, Calais (10268) (305-153) (1973-74)
18799
(1978-88)
PEUGEOT
205 series

KING PIN LINK
SET
YEAR MODEL
9/99-on 205 series TE1718 TE1718
206 series
9/99-3/07 206 series TE2220 TE2219 RE9531 RE9531 - For 206 with ZF Pinion
(TE434R) (TE435R) ZF Pinion
306 series
1/94-9/03 306 series - power steer BJ581 TE1741 TE1741 RE2834 RE2834 - 368mm 12x1.0 (socket) F14x1.5 (tre)
(TE3638R) (TE3638R) (RE3437)
307 series
12/01-on 307 series RE9531
405 series
2/89-8/96 405 series RE7089 RE7089 - 288mm 14x1.5 (socket) 12x1.25 (tre)
406 series
1999-on 406 series BJ989 TE534R TE534R RE9233
(RE3540)
504 series
1968-80 504 to chassis# 3221370 BJ894RK TE9918K TE1741 TE9918K - repair kit only
repair kit only repair kit only (TE3638R)
1974-84 504 sedan & wagon - to chassis# 3692053 BJ894RK TE1741 TE1741 BJ894RK - repair kit only up to '82
repair kit only (TE3638R) (TE3638R) BJ894 - complete assembly for '82 on
1974-84 504 sedan & wagon - from chassis# 3692054 BJ894 TE1741 TE1741 BJ894RK - repair kit only up to '82
complete assembly (TE3638R) (TE3638R) BJ894 - complete assembly for '82 on
505 series
1979-93 505 sedan & wagon - to chassis# 1341364 BJ894RK TE1741 TE1741 RE6401 BJ894RK - repair kit only up to '82
repair kit only (TE3638R) (TE3638R) (RE7099) BJ894 - complete assembly for '82 on
1979-93 505 sedan & wagon - from chassis# 1341365 BJ894 TE1741 TE1741 RE6401 BJ894RK - repair kit only up to '82
complete assembly (TE3638R) (TE3638R) (RE7099) BJ894 - complete assembly for '82 on
604 series
1975-84 604 sedan & wagon - to chassis# 6607525 BJ894RK TE1741 TE1741 BJ894RK - repair kit only up to '82
repair kit only (TE3638R) (TE3638R) BJ894 - complete assembly for '82 on
1975-84 604 sedan & wagon - from chassis# 6607526 BJ894 TE1741 TE1741 BJ894RK - repair kit only up to '82
complete assembly (TE3638R) (TE3638R) BJ894 - complete assembly for '82 on

KING PIN LINK
SET
YEAR MODEL
605 series
1999-on 605 series BJ989 TE434R TE435R
PLYMOUTH
1957-74 all models BJ8 SX1103A TE173R TE173R TE173L TE173L
NLA Male Male Male Male
1965-78 Fury BJ8 TE173R TE173R TE173L TE173L
1960-72 Barracuda BJ18
1972-74 Barracuda, Cuda BJ8 TE173R TE173R TE173L TE173L
1970-73 Belvedere, Satellite, Roadrunner BJ8 TE173R TE173R TE173L TE173L
PONTIAC
1941-48 Series 24,25,26,27,28 all models KX26 SX1028 TE52R TE52R
NLA NLA
1949-54 Series 20 & 22 all models KX20 SX1019 TE57R TE57R TE57L TE57L
NLA NLA
1949-52 Chieftain, Streamliner, Silver Streak Series 25,27 KX26 SX1028 TE52R TE52R
NLA NLA
1953-57 Chieftain, Star Chief, Streamliner, Super Chief TE52R TE52R
1955-57 Laurentian, Pathfinder (Canadian origin) BJ70
1958-70 Custom Sport, Fleet, Laurentian, Parisienne, BJ70 BJ71 ES378L ES378L ES378R ES378R
Pathfinder, Safari, Strato Chief, Super Sport
(Canadian origin)
1969-72 Grand Prix BJ54 BJ55 or

BJ55OS
(oversize)
1971-74 Ventura BJ54 BJ55 or

BJ55OS
(oversize)
BONNEVILLE, etc.
1971-76 Bonneville, Catalina, Grandville, Grand Safari BJ487 BJ488 18765 ES403R ES403R
(10268) (305-153) (1973-76)
1977-81 Bonneville, Catalina, Grandville (RWD) BJ487 BJ488 18799 TE2019R TE2019R TE2020L TE2020L

KING PIN LINK
SET
YEAR MODEL
(10268) (305-153) (ES2019R) (ES2019R) (ES2020L) (ES2020L)
1982-86 Bonneville, Catalina, Grandville (RWD) BJ487 BJ488 18799

(10268) (305-153)
FIREBIRD, TRANSAM
1967 Firebird, Transam BJ54 BJ55 or 18718
BJ55OS
(oversize)
1968 Firebird, Transam BJ54 BJ55 or 18718 ES381R ES381R

BJ55OS
(oversize)
1969 Firebird, Transam BJ54 BJ55 or

BJ55OS
(oversize)
1970-75 Firebird, Transam BJ487 BJ488 18753 ES404R ES404R

(10268) (305-153) (1972-75)

(10268) (305-153)

(10268) (305-153)
1993-96 Firebird, Transam BJ488

(305-153)
GTO, LeMANS
1964-72 GTO, LeMans, Grand AM BJ54 BJ55
1973-81 GTO, LeMans, Grand AM BJ487 BJ488 18765

(10268) (305-153) (1973-74)
18799
(1978-88)
PORSCHE
1963-70 Porsche 901, 911 BJ9114 TE9112R TE9112R
M14x1.5 RH Thread
1970-89 Porsche 911, 911 Cabrio, 911 Targa BJ9119 TE9112R TE9112R
or M14x1.5 RH Thread

KING PIN LINK
SET
YEAR MODEL
BJ9117
(2.2T & 2.3T)
1970-89 Porsche 911 Turbo - 3.3 SC BJ9119 TE9302R TE9302R RE9303

M14x1.5 RH Thread M14x1.5 RHT
1989-93 Porsche 911, 911 Cabrio, 911 Targa BJ9644 TE9642R TE9642R
M14x1.5 RH Thread
1993-on Porsche 911, 911 Cabrio BJ9939 TE9133R TE9131R RE9931 Tie Rod Assy inc. TE9131R + RE9931 = TR9334
M14x1.5 RH Thread Tie Rod Assy inc. TE9133R + RE9931 = TR9335
1969-75 Porsche 914 BJ9113 TE9112R TE9112R

M14x1.5 RH Thread
1975-77 Porsche 924, 924 Turbo - power steer BJ3227 TE7111 TE7111 RE7110 BJ3227 - 15mm
female female
1975-77 Porsche 924, 924 Turbo - manual steer BJ3227 TE7118 TE7118 RE7119 BJ3227 - 15mm
male male
1978-85 Porsche 924, 924 Turbo - power steer BJ2022 TE7111 TE7111 RE7110 BJ2022 - 3 bolt mount spigot style 17mm
female female
1978-85 Porsche 924, 924 Turbo - manual steer BJ2022 TE7118 TE7118 RE7119 BJ2022 - 3 bolt mount spigot style 17mm
male male
1977-85 Porsche 928, 928S BJ7112 TE7115 TE7115 RE6624 RE6624 - 270mm 16x1.5 (socket) F14x1.5 (tre)
1985-on Porsche 928 TE7115 TE7115 RE6624 RE6624 - 270mm 16x1.5 (socket) F14x1.5 (tre)
1981-89 Porsche 944 from chassis# DN402645 BJ2022 TE3226 TE3226 RE7120 BJ2022 - 3 bolt mount spigot style 17mm
power steer
1981-89 Porsche 944 from chassis# DN402645 BJ2022 TE7118 TE7118 RE7119 BJ2022 - 3 bolt mount spigot style 17mm
manual steer male male
1999-on Porsche Boxster

KING PIN LINK
SET
YEAR MODEL
PROTON
5/95-2002 Persona, Wira, M21 - sedan & coupe BJ285 TE730R TE730R RE6402 Rear RE6402 - 329mm 14x1.5 (socket) 12x1.25 (tre)
STB7522
2/97-2002 Satria Gti - hatchback BJ285 RE6402 RE6402 - 329mm 14x1.5 (socket) 12x1.25 (tre)
12/01/2002 Waja - sedan
2/2003-on Jumback (C97P) RE6402 RE6402 - 329mm 14x1.5 (socket) 12x1.25 (tre)
RAMBLER - see AMC
RANGE ROVER - see LANDROVER
RELIANT
Scimitar SE4-8
Scimitar SS1
RENAULT
R12, R15, R16, R17
1969-77 Renault R12 BJ105 BJ106 TE1415L TE1415R TE4297 TE4297
1973-77 Renault R15, R17 BJ105 BJ106 TE1415L TE1415R TE4297 TE4297
1968-78 Renault R16 BJ107 BJ108 TE1135L TE1135R TE4297 TE4297
R18, R19, R20, R25

1980-83 R18 GTS BJ105 BJ886 TE1707 TE1707 RE4193
14 x 1.5mm RH Thread
1991-on R19 TXE, RT BJ885 TE2174 TE2173
1976-80 R20TL - to chassis# 160600 BJ332 BJ813 TE1767 TE1767 TE1767 - 14x1.5mm LH Thread
LH Thread LH Thread
1977-83 R20TS - to chassis# 48700 BJ2020 BJ795 TE1768 TE1768 6mm fixing
1977-83 R20TS - from chassis# 48701 BJ2020 BJ830 TE1768 TE1768 7mm fixing
11/83-92 R25 BJ4295 BJ4281 TE1768 TE1768

KING PIN LINK
SET
YEAR MODEL
ESPACE
1984-90 Espace BJ887 BJ886 TE1768 TE1768 RE6302
1991-on Espace BJ4295 BJ4281 TE1768 TE1768 RE6431

FUEGO
1982-86 Fuego BJ887 BJ886 TE1768 TE1768 RE4193
LAGUNA
5/95-7/96 Laguna RE6648 RE6648 - 282mm 12x1.0 (socket) 14x1.5 (tre)
MEGANE
5/01-9/03 Megane RE6689 RE6689 - 230mm 14x1.5 (socket) 14x1.5 (tre)
10/03-on Megane X84 RE6729
RILEY
1957-65 1.5 litre TE126R TE126R
1961-69 Elf BJ29 BJ29 TE179R TE179R BJ29 - Ball joint repair kit
repair kit repair kit
1965-69 Kestrel 1100,1300 BJ37 BJ38 TE179R TE179R BJ37 - Ball joint repair kit
repair kit repair kit BJ38 - Ball joint repair kit
ROCKWELL AXLES
17101,FG931,FG933,FG941,FG943 K582 310-222 310-223 King pin set with metal bushes
14600lb axle - king pin set with metal (5.44") (5.44") - 1.7935" x 10.392"
bush and 5..44" stud centre-to-end or or
tie rod ends or with 5.75" stud 310-229 310-228
centre-to-ends tie rod ends (5.75") (5.75")
17101,FG931,FG933,FG941,FG943 K583 310-222 310-223 King pin set with composite

14600lb axle - king pin set with composite (5.44") (5.44") bushes - 1.7935" x 10.392"
bush and 5.44" stud centre-to-end or or
tie rod ends or with 5.75" stud 310-229 310-228
centre-to-end tie rod ends (5.75") (5.75")
FH901 16000lb & FL901 18000lb axle 300-210 310-229 310-228 Twin keyway king pin set with
metal bushes - 1.9985" x 11.04"

KING PIN LINK
SET
YEAR MODEL
FF931 9000lb & FF931 12000lb axle 300-232 310-222 310-223 Twin keyway king pin set with
metal bushes - 1.793" x 10.39"
FL931 & FL933 - 16000/18000/20000lb 300-216 310-283 310-284 Twin keyway king pin set with
axles with 7.37" stud centre-to-end tie rod ends (7.37") (7.37") metal bushes - 1.999" x 11.21"
or 5.75" stud centre-to end tie rod ends or or
310-229 310-228
(5.75") (5.75")
ROVER
1948-64 Series 60,75,80,90,95,100,105,110 TE79L TE79R RH-TE79L Centre Rod - ends only TE79L & TE79R
LH-TE79L
2000,2000TC,3500,3500S
1963-78 2000, 2000TC, 3500, 3500S BJ109 BJ110 DL1138 Centre Rod - ends only TE449L & TE449R
Coil Spring Suspension
LANDROVER - see LANDROVER
QUINTET
1981-86 Quintet SU series - ball joint & arm BJ4247R TE627R TE627R RE849 RE849 - 295mm 12x1.25 (socket) 12x1.25 (tre)
(BJ4247) (TE681) (TE681) male end
inc. Arm 75mm long - straight
1986-90 Quintet 416i RH-BJ4118R+ARM TE627R TE627R RE850 RE850 - 315mm 12x1.25 (socket) 12x1.25 (tre)
LH-BJ4119L+ARM (TE681) (TE681) male end
RANGE ROVER - see LANDROVER
SD1
1976-87 SD1 (3500,3500SE) 5 door hatchback RH-BJ2016 TE3625R TE3625R control arms
LH-BJ2017 power steer only
NLA NLA NLA
VITESSE
1983-87 Vitesse 416 RH-BJ4118R+ARM TE627R TE627R control arms
LH-BJ4119L+ARM (TE681) (TE681)

KING PIN LINK
SET
YEAR MODEL
SAAB
1967-74 99 series BJ1004 BJ1004 TE1422 TE1422 TE1422 - ½" x 20 UNF RHT female
(BJ658) (BJ658)
1975-87 99 series 1.7 - 2.0L BJ1004 BJ1004 TE1676 TE1676 RE8941 TE1676 - M14 x 1.5 RHT female
(BJ658) (BJ658)
1984-86 90 series 2.0L BJ1004 BJ1004 TE1676 TE1676 RE8941 TE1676 - M14 x 1.5 RHT female
(BJ658) (BJ658)
1979-93 900 series - to chassis# K8993560 BJ1004 BJ1004 TE1676 TE1676 RE7103 TE1676 - M14 x 1.5 RHT female
(BJ658) (BJ658) RE7103 - 275mm F14x1.5 (socket) 14x2.0 (tre)
1979-93 900 series - from chassis# K8993561 BJ1004 BJ1004 TE2768 TE2768 RE7088 TE2768 - M14 x 2 RHT
(BJ658) (BJ658) 11/86-on RE7088 - 273mm F14x1.5 (socket) 14x2 (tre)
1993-98 900 series TE2749R TE2756R Front TE2756R/TE2749R - ends only M16x2 RHT female
STB7702
1985-on 9000 series BJ1328 BJ1328 TE2366 TE2366 RE2250 TE2366 - M14 x 1.5 RHT female
98-9/03 9-3 series TE2749R TE2756R Front TE2756R/TE2749R - ends only M16 x 2 RHT
STB7702 STB7702 - not D7 series convertible
11/06-on 9-3 series - 1.9L turbo Diesel TRW Rack RE6681 RE6681 - 309mm 18x1.5 (socket) 14x1.5 (tre)
11/97-on 9-5 series RE6764
SCANIA
Scania TE1699L TE1699R
BLD 28mm BLD 28mm
SCOUT - see INTERNATIONAL TRUCKS
SEAT
CORDOBA
11/93 - 10/95 Cordoba - manual steer BJ7365 TE9303R TE9812R RE9803
11/93 - 10/95 Cordoba - power steer BJ7365 TE9303R TE9812R RE8803
11/95-12/99 Cordoba SX BJ7365 TE2281 TE2282 RH - RE2804
LH - RE2803
11/95-12/99 Cordoba excl. SX BJ7365 TE2281 TE2282 RH - RE2806

KING PIN LINK
SET
YEAR MODEL
LH - RE2805
IBIZA
to 5/1984 Ibiza TE415R TE415R RE2913 14 X 1.5
6/84-6/86 Ibiza TE2406R TE2406R RE2449 12 X 1.5
7/86-6/93 Ibiza TE2406R TE2406R RE9832
8/93 - 10/95 Ibiza excl. 1.3 - manual steer BJ7365 TE9303R TE9812R RE9803
8/93 - 10/95 Ibiza excl. 1.3 - power steer BJ7365 TE9303R TE9812R RE8803
11/95-on Ibiza GTI BJ7365 TE2281 TE2282 RH - RE2804
LH - RE2803
11/95-on Ibiza excl. GTI BJ7365 TE2281 TE2282 RH - RE2806
LH - RE2805
TOLEDO
3/91-96 Toledo - manual steer BJ7365 TE9303R TE9812R RE9803
3/91-96 Toledo - power steer BJ7365 TE9303R TE9812R RE8803
1/97-on Toledo BJ3485 TE9303R TE9812R RE3532
SINGER
1961-67 Vogue Mk I,II,III,IV (wishbone suspension) BJ31 BJ32 TE125L TE125L TE125R TE125R
NLA NLA
1961-63 Gazelle IIIC BJ30 KX185 TE125L TE125L TE125R TE125R

NLA NLA
1963-67 Gazelle V,VI (wishbone suspension) BJ31 BJ32 TE125L TE125L TE125R TE125R
NLA NLA
1967-70 Gazelle, Vogue (strut suspension) BJ56 SX1130 TE125L TE125L TE125R TE125R SX1130 - Idler arm support assembly
SOARER - see TOYOTA Soarer
SSANGYONG

KING PIN LINK
SET
YEAR MODEL
1993-on Musso BJ3011 RE7104 RE7104 - 290mm 16x1.5 (socket) 14x1.5 (tre)
96-98
7/98-on Korando RE911 RE911 - 291mm 16x1.5 (socket) 14x1.5 (tre)
STUDEBAKER
1951-62 Champion, Commander, Hawk, Lark, President SX76 SX75 310-220 310-221 310-221 310-220
with short outer tie rod ends NLA NLA
1962-63 All models except Avanti SX76 SX75 310-220 310-220

with long outer tie rod ends NLA NLA
SUBARU
1400 series
1971-76 1400 sedan, coupe, wagon BJ308 TE815R TE815R
1600 series
1976-80 1600 sedan, coupe, wagon BJ308 TE815R TE815R
BRUMBY
1978-80 Brumby 1600 Ute 4x4 BJ308 TE815R TE815R RE7012 RE7012 - 300mm F16x1.5 (socket) 14x1.5 (tre)
Female 300mm long
1980-94 Brumby 1800 Ute 4x4 BJ315 TE816L TE816R RE860 RE860 - 250mm F16x1.5 (socket) 14x1.5 (tre)
(BJ257) (TE694L) (TE694R) Female 250mm long
FORESTER
3/97-5/02 Forester 197-L02 BJ4141 TE8665 TE8665 RE1023 1998-02 RE1023 - 310mm 14x1.5 (socket) 14x1.5 (tre)
or can use or can use (RE6405) Front TE8665 - straight
TE2975 TE2974 (RE82975) STB8106 TE2974/75 - bent
Rear
STB8107
5/02-2/08 Forester 102 BJ4141 TE8665 TE8665 RE7105 2003-on RE7105 - 320mm 16x1.5 (socket) 14x1.5 (tre)
SG or can use or can use (RE82995) Front TE8665 - straight
TE2975 TE2974 (RE7412) STB8196 TE2974/75 - bent

KING PIN LINK
SET
YEAR MODEL
3/2008-2011 Forrester
SH
IMPREZA
4/93-9/00 Impreza - GC3, GC8, GF5, GF8 BJ4141 TE8665 TE8665 RE1023 1993-01 RE1023 - 310mm 14x1.5 (socket) 14x1.5 (tre)
(straight) (straight) (RE6405) Sed/Wgn TE8665 - straight
or or (RE3414) Rear TE2974/75 - bent
TE2975 TE2974 (RE82975) STB8106
(curved) (curved) Rear
check prior to ordering STB8107
1998-00 Impreza BJ4141 TE8665 TE8665 RE7106 1993-01 RE7106 - 307mm 14x1.5 (socket) 14x1.5 (tre)
or can use or can use (RE8665) Sed/Wgn TE8665 - straight
TE2975 TE2974 Rear TE2974/75 - bent
STB8106
Rear
STB8107
IMPREZA WRX
2/94-00 Impreza WRX BJ4141 TE8665 TE8665 RE1023 1993-01 RE1023 - 310mm 14x1.5 (socket) 14x1.5 (tre)
(straight) (straight) (RE6405) Sed/Wgn TE8665 - straight
or or (RE3414) Rear TE2974/75 - bent
TE2975 TE2974 (RE82975) STB8106
(curved) (curved) Rear
check prior to ordering STB8107
2001 Impreza WRX TE8665 TE8665 RE6413 RE6413 - 318mm 14x1.5 (socket) 14x1.5 (tre)
TE8665 - straight
12/02-05 Impreza WRX - GDA, GGA BJ4141 TE8665 TE8665 RE1023 RE1023 - 310mm 14x1.5 (socket) 14x1.5 (tre)
(RE82975) TE8665 - straight
10/99-05 Impreza WRX Sti - GDB BJ4141 TE8665 TE8665 RE1023 RE1023 - 310mm 14x1.5 (socket) 14x1.5 (tre)
05-on Impreza WRX - GDE, GGE BJ4141 TE8665 TE8665 RE7105 Front RE7105 - 320mm 16x1.5 (socket) 14x1.5 (tre)
(RE7412) STB8106 TE8665 - straight
(RE82995) Rear
STB7752
10/05-on Impreza WRX Sti - GDF BJ4141 TE8665 TE8665 RE7105 RE7105 - 320mm 16x1.5 (socket) 14x1.5 (tre)

KING PIN LINK
SET
YEAR MODEL

(RE82995)
LEGACY (OUTBACK)
1990-92 Legacy BC2, BC3, BC4, BC5 BJ4141 TE2975 TE2974 RE1023 Front RE1023 - 310mm 14x1.5 (socket) 14x1.5 (tre)
(RE6405) STB8106 TE2974/75 - bent
(RE82975) straight tre's will not suit
1993-94 Legacy BJ4141 TE8665 TE8665 RE1023 Front RE1023 - 310mm 14x1.5 (socket) 14x1.5 (tre)
or can use or can use (RE6405) STB8106 TE8665 - straight
TE2975 TE2974 (RE82975) TE2974/75 - bent
1995-05 Legacy - BG, BH BJ4141 TE8665 TE8665 RE1023 1995-on RE1023 - 310mm 14x1.5 (socket) 14x1.5 (tre)
or can use or can use 310mm Front RE7105 - 320mm 16x1.5 (socket) 14x1.5 (tre)
TE2975 TE2974 or STB8106 TE8665 - straight
RE7105 Rear to 99 TE2974/75 - bent
320mm STB8107
8/00-on
STB7751
05-09 Legacy - BHE BJ4141 TE8665 TE8665 Front

or can use or can use STB8106
TE2975 TE2974 Rear
STB7751
LEONE
6/79-84 1800 sedan 2WD & 4WD, coupe, wagon 4WD BJ315 TE816L TE816R RE860 RE860 - 250mm F16x1.5 (socket) 14x1.5 (tre)
AB2, AB4, AM1, AM2 - 2WD (BJ257) (TE694L) (TE694R) Female 250mm long RE7012 - 300mm F16x1.5 (socket) 14x1.5 (tre)
AB5, AJ5, AM3, AM5 - 4WD or
RE7012
Female 300mm long
6/84-88 1800 sedan 2WD & 4WD, wagon 4WD BJ315 TE701L TE701R RE876 RE876 - manual steer excluding Turbo
AL4, AL5 - manual steer (BJ257) male end RE876 - 295mm 14x1.5 (socket) 14x1.5 (tre)
(not Turbo)
6/84-88 1800 sedan 2WD & 4WD, wagon 4WD BJ315 TE701L TE701R RE877 RE877 - power steer
AL4, AL5 - power steer (BJ257) male end RE877 - 300mm 14x1.5 (socket) 14x1.5 (tre)
1988-94 1800 2WD & 4WD power steer BJ315 TE701L TE701R RE989 RE989 - 296mm 14x1.5 (socket) 14x1.5 (tre)
(BJ257) (TE987) (TE986)

KING PIN LINK
SET
YEAR MODEL
LIBERTY
1989 L series manual steer TE701L TE701R RE5006
female
1990-5/94 Liberty sedan, wagon & turbo BC, BF BJ4141 TE2975 TE2974 RE1023 Front RE1023 - 310mm 14x1.5 (socket) 14x1.5 (tre)
DX, GX, LX 2WD & 4WD (RE6405) STB8106 TE2974/75 - bent
(RE82975) Rear straight tre's will not suit
STB8107
6/94-9/99 Liberty sedan, wagon & turbo BD, BG BJ4141 TE8665 TE8665 RE1023 Front RE1023 - 310mm 14x1.5 (socket) 14x1.5 (tre)
GX, LX, RX 2WD & 4WD or can use or can use (RE6405) STB8106 TE8665 - straight
TE2975 TE2974 (RE82975) Rear TE2974/75 - bent
STB8107
10/00-03 Liberty sedan, wagon & turbo BE, BH BJ4141 TE8665 TE8665 RE1023 Front RE1023 - 310mm 14x1.5 (socket) 14x1.5 (tre)
TE2975 TE2974 (RE82975) 65mm TE2974/75 - bent
9/03-05 Liberty sedan, wagon & turbo BL,BP BJ4141 TE8665 TE8665 RE1023 Front RE1023 - 310mm 14x1.5 (socket) 14x1.5 (tre)
TE2975 TE2974 (RE82975) 60mm TE2974/75 - bent
Rear
STB4208
85mm
05-on Liberty sedan, wagon & turbo BL,BP BJ4141 TE8665 TE8665
or can use or can use
TE2975 TE2974
OUTBACK - see LEGACY
TRIBECA
2007-on Tribeca RE6678 RE6678 - 343mm 16x1.5 (socket) 14x1.5 (tre)
VORTEX
1985-91 Vortex XT turbo coupe - manual steer BJ315 TE701L TE701R RE876 RE876 - 295mm 14x1.5 (socket) 14x1.5 (tre)

KING PIN LINK
SET
YEAR MODEL
(BJ257) male end
1985-91 Vortex XT turbo coupe - power steer BJ315 TE701L TE701R RE877 RE877 - 300mm 14x1.5 (socket) 14x1.5 (tre)
(BJ257) (RE7108)
SUNBEAM
1958-63 Rapier, Alpine Series I,II,III,IIIA BJ30 KX185 TE125L TE125L TE125R TE125R
NLA NLA
1963-67 Rapier, Alpine Series IV,V BJ31 BJ32 TE125L TE125L TE125R TE125R
(wishbone suspension) NLA NLA
1967-76 Rapier, Alpine, Arrow (strut suspension) BJ56 SX1130 TE125L TE125L TE125R TE125R SX1130 - Idler arm support assembly
NLA NLA
SUZUKI
ALTO - see SUZUKI Commercial
BALENO
Baleno RE864 RE864 - 317mm 14x1.5 (socket) 12x1.25 (tre)
IGNIS
7/00-9/03 Ignis
SWIFT
1984-91 Swift SA,SF310,SF413 - one piece lower arm/ball joint BJ400 TE3628R TE3628R RE1003 RE1003 - 268mm F14x1.5 (socket) 12x1.25 (tre)
AA41S, AA41V, AB41S inc. Arm (RE6404)
RH Thread RH Thread
1991-97 Swift SF310, SF413, SF416 RH-BJ423R TE988 TE988 RE1004 1995-01 RE1004 - Female 285mm long 12x1.25 TRE thread
(BJ4158) (RE990) Front/Rear

LH-BJ424L STB8078
(BJ4159)
inc. Arm
SUZUKI - Commercial
ALTO
79-8/84 Alto SS30V,SS40V,SS41V, SS80V - 4WD BJ406 TE813R TE813R RE861 RE861 - 215mm F16x1.5 (socket) F12x1.25 (tre)

KING PIN LINK
SET
YEAR MODEL
inc. Arm (TE689R) (TE689R) female end

RH Thread RH Thread
9/84-88 Alto CA71V, CA72V, CC71V, CC72V - 4WD BJ406 TE724R TE724R RE872 RE872 - 227mm F14x1.5 (socket) F12x1.25 (tre)
(BJ4250)
inc. Arm
1/91-on Alto CL22V, CM22V, CR22S, CS22S TE724R TE724R RE872
CARRY/ST series
1976-79 ST10,ST20 797cc 4cyl. van & truck TE811L TE811R TE811R TE811L
LH Thread RH Thread RH Thread LH Thread
1979-92 ST80,SV90,SK408 797cc 4cyl, van & truck BJ407 TE812L TE812R TE812R TE812L
inc. Arm LH Thread RH Thread RH Thread LH Thread
(1980-85)
1984-3/85 ST308 796cc 3cyl. van & truck TE812L TE812R TE812R TE812L
ESCUDO - see VITARA
HATCH
1979-85 SS30V,SS40V,SS80V van & hatch BJ406 TE813R TE813R RE861 RE861 - 215mm F16x1.5 (socket) F12x1.25 (tre)
JIMNY - see SIERRA
L series
1972-76 L50, L51, L60, L61 van & truck TE811L TE811R TE811R TE811L
LJ series (STOCKMAN 4WD)

1974-78 LJ50, LJ51 - 4x4 TE814L TE814R DL306 DL306 - 585mm overall length
(TE690L) (TE690R) DL306 - ball studs 90deg offset
1978-81 LJ80,LJ81 - 4x4 TE814L TE814R TE691R TE691R DL306 DL306 - 585mm overall length
MIGHTY BOY
1985-88 Mighty Boy SS40T Utility BJ406 TE813R TE813R RE861 RE861 - 215mm F16x1.5 (socket) F12x1.25 (tre)
SIERRA / JIMNY
7/77-82 Sierra SJ10, SJ20 TE814L TE814R TE691R TE691R DL306 DL306 - 585mm overall length

KING PIN LINK
SET
YEAR MODEL
5/81-6/83 Sierra SJ30. SJ31, SJ32 TE692L TE692R TE725 TE725
7/83-on Sierra SJ30, SJ31, SJ32, SJ33 TE692R TE692R TE693 TE693 DL307 DL307 - 'Narrow Track' only
SJ410, SJ411, SJ412, SJ413 'long' with two ball studs (TR307)
SJ50
8/82-on Sierra SJ40, JA51, JA71 TE692R TE692R TE693 TE693 DL307 TE693 - 970mm long
"Narrow Track" 'short' tie rod ends 'long' with two ball studs (TR307) Tie Rod Ends - only one of each per vehicle
DL307 - 'Narrow Track' only
11/89-on Sierra JA11C, JA11V TE692R TE692R TE887 TE887 DL308 TE887 - 1030mm long
"Wide Track" (longer than TE693) Tie Rod Ends - only one of each per vehicle
all Jimny RE6407 RE6407 - 262mm F14x1.5 (socket) 12x1.25 (tre)
SUPER CARRY
1985-89 Super Carry van & truck SK410 & 4WD BJ407 TE812L TE812R TE812R TE812L
inc. Arm LH Thread RH Thread RH Thread LH Thread
VITARA
5/88-95 Vitara BJ7542 TE692R TE692R TE7542 TE7542 Front
M16x1.5 RHT M16x1.5 RHT STB8079
1995-98 Vitara - 3 door BJ7542 TE7571 TE7571 TE7572 TE7572 Front

STB8079
1995-98 Vitara - 5 door BJ7542 TE692R TE692R TE7572 TE7572 Front

STB8079
1999-02 Vitara TE4867L TE4767R RE4867 Front

STB7587
1999-05 Grand Vitara LH-BJ5006 TE1460 TE1459 RE1077 Front RE1077 - 245mm 16x1.0 (socket) 14x1.5 (tre)
RH-BJ5007 (TE4865L) (TE4865R) (RE4865) STB7587

KING PIN LINK
SET
YEAR MODEL
inc Arm
TOYOTA
AVANTI
1985-87 Avanti ST141,ST142 - manual steering BJ145 TE640R TE640R RE878 TE640R - longer than TE641R
1985-87 Avanti ST141,ST142 - power steering BJ145 TE641R TE641R RE878 TE641R - shorter than TE640R
AVALON
1996-00 Avalon - MCX10
7/00-12/03 Avalon - MCX20 BJ2932 TE2931 TE2931 RE2930 Front RE2930 - 357mm 14x1.5 (socket) 15x1.5 (tre)
3 bolt mount RH-STB8198
LH-STB8197
Rear
STB8105
2005-07 Avalon - GSX30 RH- BJ9330 TE3753L TE3753R RE9420

LH- BJ9040
2006-on Avalon - ACV4# RH-BJ9580 TE3753L TE3753R RE9275

LH-BJ9100
AVENSIS
2005-on Avensis RE9055 RE9055 - 315mm 14x1.5 (socket) 15x1.5 (tre)
CAMRY inc. VIENTA

3/82-87 Camry SV11 - 5 door hatch BJ231 TE870 TE870 RE879 RE879 - 244mm 14x1.5 (socket) 14x1.5 (tre)
SV1# & CV1# series 2 bolt mount (TE3687R) (TE3687R) male end TE870 - Female RHT M14x1.5
5/87-2/93 Camry SV20, SV21, SV22 1.8 & 2.0lt 4cyl. BJ231 TE648 TE648 RE880 Front Japanese steering rack
- Japanese steering rack power steer 2 bolt mount (TE9305) (TE9305) STB8008 RE880 - 345mm 14x1.5 (socket) 14x1.5 (tre)
Rear TE648 - Female RHT M14 x 1.5
STB8001
5/87-2/93 Camry SV20, SV21, SV22 1.8 & 2.0lt 4cyl. BJ231 TE648 TE648 RE1008 Front TRW steering rack
- TRW steering rack power steer 2 bolt mount (TE9305) (TE9305) (P191008) STB8008 TE648 - Female RHT M14 x 1.5
(RE991) Rear RE1008 - 345mm 16x1.5 (socket) 14x1.5 (tre)
STB8001

KING PIN LINK
SET
YEAR MODEL
1987-3/90 Camry SV21 - manual steer BJ231 TE648 TE648 RH-RE1008 (P191008) - 14mm dia. shaft & 16mm thread @ rack shaft end Front TE648 - Female RHT M14 x 1.5
2 bolt mount (TE9305) (TE9305) LH-RE1009 (P191009) - has recess for steering damper bracket STB8008 RE1008 - 345mm 16x1.5 (socket) 14x1.5 (tre)
Rear
STB8001
11/92-6/97 Camry SVD10 2.2lt 4cyl. & Vienta VDV10 BJ920 TE991T TE991T RE1020 Front Rear Toe Adjuster - TE5504
3.0lt V6 (TRW BJ301) (TRW TE751) (TRW TE751) (P191020) STB8008 BJ920 - ball joint only
"Wide Body" 3 bolt mount (TE9916) (TE9916) (RE992) Rear ARM4132/4133 - control arm
RH-ARM4132R STB8105 NOTE - Roadsafe now reference TE751 for
LH-ARM4133L Nissan Navara - confirm vehicle application
if ordered by part number
7/97-on Camry SXV20, MCV70 BJ920 TE3591 TE3591 RE2930 Front RE2930 - 357mm 14x1.5 (socket) 15x1.5 (tre)
(TRW BJ301) (RE3590) RH-STB8198 RE1020 - 357mm 16x1.5 (socket) 16x1.5 (tre)
3 bolt mount or LH-STB8197 NOTE - Roadsafe now reference BJ301 for

RE1020 Rear Toyota Hilux - confirm vehicle application
(P191020) STB8105 if ordered by part number
2001-03 Camry ACV3# RH-BJ3752R TE1452 TE1451 RE3750 Front RE3750 - 352mm 14x1.5 (socket) 15x1.5 (tre)
LH-BJ3752L (RE6442) STB8200
(for ACV30) Rear
or STB8201
RE3900
(for ACV35)
2003-04 Camry ACV3# RH-BJ3752R TE3753L TE3753R Front

LH-BJ3752L STB4209
285mm
2006-on Camry ACV4# RH-BJ9580 TE3753L TE3753R RE9275 Rear
LH-BJ9100 STB4209
195mm
CELICA
1971-9/75 Celica TA22, TE23 1.6lt coupe BJ145 SX4239 TE489L TE489L TE490R TE490R TR565 SX5240 TE490R - 183mm long
NLA SX4239 - 105mm b/w mount holes BLD 12.95mm
LH Thread LH Thread
10/75-77 Celica TA23, RA23, RA28 coupe & liftback BJ145 SX4246 TE489L TE489L TE564R TE564R TR556 SX5241 TE564R - 170mm long

KING PIN LINK
SET
YEAR MODEL
NLA NLA SX4239 - 105mm b/w mount holes BLD 12.95mm

LH Thread LH Thread RH Thread RH Thread BLD - 12.5mm
1977-7/81 Celica RA40 coupe & liftback BJ145 SX1141 TE489L TE489L TE564R TE564R TR556 SX5241 TE564R - 170mm long
NLA
LH Thread LH Thread RH Thread RH Thread BLD - 12.5mm
7/81-83 Celica RA60 coupe & liftback - manual steer BJ145 TE640R TE640R RE878 RE878 - 190mm 14x1.5 (socket) 14x1.5 (tre)
male end
7/81-83 Celica RA60 coupe & liftback - power steer BJ145 TE641R TE641R RE878 RE878 - 190mm 14x1.5 (socket) 14x1.5 (tre)
male end
1983-12/85 Celica RA65, SA63 coupe & liftback BJ145 TE640R TE640R RE878 RE878 - 190mm 14x1.5 (socket) 14x1.5 (tre)
- manual steer male end
1983-12/85 Celica RA65, SA63 coupe & liftback BJ145 TE641R TE641R RE878 RE878 - 190mm 14x1.5 (socket) 14x1.5 (tre)
- power steer male end
8/85-8/89 Celica ST162 coupe & liftback BJ260 TE648 TE648 RE880 - 14mm dia. shaft & 14mm thread @ rack shaft end Front TE648 - Female RHT M14 x 1.5
3 bolt mount STB4208 RE880 - 345mm 14x1.5 (socket) 14x1.5 (tre)
70mm BJ260 - 3 bolt mount BLD 15.95mm
Rear
8/89-94 Celica ST184, ST185 coupe & liftback BJ365 TE648 TE648 RE1019 STB4209 BJ365 - 3 bolt mount BLD 17.84mm
(TE9305) (TE9305) (RE2970) - overall length 355mm (10mm longer than RE880) 108mm TE648 - Female RHT M14 x 1.5
3/93-11/99 Celica ST204, ST205 coupe & liftback BJ550 TE648 TE648 RE1019 Front TE648 - Female RHT M14 x 1.5
STB8006
Rear
STB8001
11/99-03 Celica ZZT231 RE7444 Front

STB7802
Rear
STB8014
COROLLA
1967-70 Corolla 1000 KE10,KE15,KE16 BJ111 SX1127 TE426L TE426L TE425R TE425R SX5238 coarse thread tie rod end
Press In idler arm coarse thread coarse thread
1967-70 Corolla 1200 KE11,KE17,KE18 BJ111 SX1127 TE534L TE534L TE535R TE535R SX5238 fine thread tie rod end
Press In idler arm fine thread fine thread
1970-74 Corolla 1200/1400/1600 KE20,KE25,KE26 BJ113 SX1131 TE428L TE428L TE427R TE427R SX5208
ball joint (SX1201)

KING PIN LINK
SET
YEAR MODEL
LH Thread LH Thread
RH-BJ5201R
LH-BJ5201L
inc. Arm
74-9/81 Corolla 1200/1300/1400/1500/1600 KE30, BJ145 SX1139 TE489L TE489L TE490R TE490R TR565 SX5209
KE35,KE36,KE38,KE50,KE55 ball joint
LH Thread LH Thread
RH-BJ5202R
LH-BJ5202L
inc. Arm
8/79-5/83 Corolla T18 (TE72) BJ145 SX1140 TE489L TE489L TE564R TE564R TR566 SX5272
(SX1672)
8/81-12/84 Corolla KE70 VAN - fully imported BJ145 TE489L TE489L RE862 RE862 - 162mm 14x1.5 (socket) 14x1.5 (tre)
ball joint
LH Thread LH Thread
RH-BJ5203R
LH-BJ5203L
8/81-12/84 Corolla AE71,KE70 BJ145 TE803R TE803R RE862 female thread tie rod ends
(TE3676R) (TE3676R) 162mm long RE862 - 162mm 14x1.5 (socket) 14x1.5 (tre)
5/83-5/85 Corolla AE86 - manual steer BJ145 TE803R TE803R RH-TR645R RE863 - suits imported model only
(TE3676R) (TE3676R) LH-TR645L
5/83-5/85 Corolla AE86 - power steer BJ145 TE803R TE803R RE864 RH-TR646R RE864 - suits imported model only
(TE3676R) (TE3676R) imported LH-TR646L RE864 - 317mm 14x1.5 (socket) 12x1.25 (tre)
317mm long
5/83-9/84 Corolla AE80,AE81,AE82 - manual steer RH-ARM457R TE649 TE649 RE863 RE863 - 332mm 14x1.5 (socket) 12x1.25 (tre)
LH-ARM458L
5/83-9/84 Corolla AE80,AE81,AE82 - power steer RH-ARM457R TE649 TE649 RE864 RE864 - 317mm 14x1.5 (socket) 12x1.25 (tre)
LH-ARM458L
9/84-12/88 Corolla AE80,AE82 - manual steer BJ233 TE648 TE648 RE865 TE648 - Female RHT M14 x 1.5
Seca & Sprinter 85mm long 85mm long 328mm long RE865 - 328mm 14x1.5 (socket) 14x1.5 (tre)
RH-ARM457R (TE9305) (TE9305)
LH-ARM458L
9/84-12/88 Corolla AE80,AE82 - power steer BJ233 TE648 TE648 RE866 TE648 - Female RHT M14 x 1.5

KING PIN LINK
SET
YEAR MODEL
Seca & Sprinter 85mm long 85mm long 315mm long RE866 - 315mm 14x1.5 (socket) 14x1.5 (tre)
RH-ARM457R (TE9305) (TE9305)
LH-ARM458L
9/84-12/88 Corolla AE80,AE82 - TRW rack BJ233 TE648 TE648 P191005 TE648 - Female RHT M14 x 1.5
85mm long 85mm long 327mm long P191005 - 327mm 16x1.5 (socket) 14x1.5 (tre)
RH-ARM457R (TE9305) (TE9305)
LH-ARM458L
1989-on Corolla AE90, AE92, AE93 - manual steer RH-BJ270 TE648 TE648 RE1008 1987-90 TE648 - Female RHT M14 x 1.5
TRW rack LH-BJ271 85mm long 85mm long (P191008) Front RE1008 - 345mm 16x1.5 (socket) 14x1.5 (tre)
or (TE9305) (TE9305) STB8008
RH-ARM459R Rear
LH-ARM460L STB8001
1989-9/94 Corolla AE90,AE92 4WD/2WD - power steer RH-BJ270 TE648 TE648 RE867 1987-90 TE648 - Female RHT M14 x 1.5
LH-BJ271 85mm long 85mm long 330mm Front RE867 - 330mm 14x1.5 (socket) 14x1.5 (tre)
or (TE9305) (TE9305) STB8008
RH-ARM459R Rear
LH-ARM460L STB8001
1988-8/94 Corolla AE95 4WD wagon - manual steer RH-BJ270 TE648 TE648 RE706 Front TE648 - Female RHT M14 x 1.5
LH-BJ271 85mm long 85mm long (RE2800) STB8006
or (TE9305) (TE9305) 330mm Rear
RH-ARM459R STB8001
LH-ARM460L
1988-8/94 Corolla AE95 4WD wagon - power steer RH-BJ270 TE648 TE648 RE867 Front TE648 - Female RHT M14 x 1.5
LH-BJ271 85mm long 85mm long 330mm STB8006 RE867 - 330mm 14x1.5 (socket) 14x1.5 (tre)
or (TE9305) (TE9305) Rear
RH-ARM459R STB8001
LH-ARM460L
1992-96 Corolla AE100 BJ550 Front BJ550 - angled bracket from ball stud mounting
or STB8006 BJ550 - 3 bolt mount

RH-ARM461R Rear STB8006 - 10mm studs
LH-ARM462L STB8001
7/94-00 Corolla AE101,AE102 BJ550 TE648 TE648 RE867 Front RE867 - 330mm 14x1.5 (socket) 14x1.5 (tre)
AE10#, CR10#, EE10# series or 85mm long 85mm long (RE2961) STB4208 BJ550 - angled bracket from ball stud mounting
imported rack RH-ARM461R (TE9305) (TE9305) 330mm 63mm BJ550 - 3 bolt mount
LH-ARM462L Rear
STB4209
7/94-00 Corolla AE101,AE102 BJ550 TE648 TE648 RE1008 108mm RE1008 - 345mm 16x1.5 (socket) 14x1.5 (tre)
AE10#, CR10#, EE10# series or 85mm long 85mm long (P191008) BJ550 - angled bracket from ball stud mounting
TRW rack RH-ARM461R (TE9305) (TE9305) 345mm BJ550 - 3 bolt mount

KING PIN LINK
SET
YEAR MODEL
LH-ARM462L
1996-99 Corolla AE110 BJ550 TE648 TE648 RE9365 1998 NOTE - TRW / PAJA used to reference
or 85mm long 85mm long 335mm Front BJ302 for Corolla - confirm vehicle
RH-ARM463R (TE9305) (TE9305) STB8006 application if ordered by part number.
LH-ARM464L Rear BJ550 - angled bracket from ball stud mounting
STB8136 BJ550 - 3 bolt mount
1995-00 Corolla AE111 BJ3642 TE648 TE648 RE9365 TE648 - Female RHT M14 x 1.5
85mm long 85mm long 335mm RE9365 - 335mm 14x1.5 (socket) 14x1.5 (tre)
12/01-on Corolla NZE120,121,CE121,ZZE122,123 BJ3642 TE3641L TE3641R RE7116 Front RE7116 - 285mm 14x1.5 (socket) 14x1.5 (tre)
(RE3640) STB4208
Rear
STB4209
108mm
2003-on Corolla ZZE13# BJ3642 RE7117 RE7117 - 317mm 14x1.5 (socket) 12x1.5 (tre)
317mm
5/07-on Corolla ZRE152 RE3901 RE7117 - 317mm 14x1.5 (socket) 12x1.5 (tre)
p/steer
CORONA
1960-64 Corona RT20,RT20L,RT26 & Tiara BJ66 TE180L TE180L
1964-69 Corona RT40,RT46,RT51,RT56 BJ68 BJ69 SX1138 TE185L TE185L TE186R TE186R SX5210 Upper arm repair kit - SX1097A
from ch# 360001
1971 Corona RT61DK (Mark II) TE3602R TE3602R TE3602R - Male RHT M14x1.5 BLD 13.13mm
TE3602R - U bend in shank 140mm
1968-73 Corona RT72 BJ235 TE185L TE185L TE3602R TE3602R TE3602R - Male RHT M14x1.5 BLD 13.13mm
(BJ2201) (TE3603L) (TE3603L) TE3602R - U bend in shank 140mm
1970-73 Corona RT80,RT81 BJ68 BJ69 SX1138 TE185L TE185L TE3602R TE3602R TR406 SX5211 Upper arm repair kit - SX1097A
TE3602R - Male RHT M14x1.5 BLD 13.13mm
TE3602R - U bend in shank 140mm
1974-8/78 Corona RT104,RT118 BJ128 BJ129 SX1137 TE489L TE489L TE494R TE493R TR646R SX5212
LH Thread LH Thread
8/78-1/82 Corona XT130,XT131,RT132,RT133 BJ145 SX1141 TE489L TE489L TE564R TE564R TR556 SX5241

KING PIN LINK
SET
YEAR MODEL
NLA BLD - 12.5mm
1/82-1987 Corona ST141/2,RT142 - manual steer BJ145 TE640R TE640R RE878 TR640 RE878 - 190mm 14x1.5 (socket) 14x1.5 (tre)
1/82-1987 Corona ST141/2,RT142 - power steer BJ145 TE641R TE641R RE878 TR640 RE878 - 190mm 14x1.5 (socket) 14x1.5 (tre)
1/83-8/84 Corona AT, CT, ST150 BJ233 TE649 TE649 RE863 RE863 - 332mm 14x1.5 (socket) 12x1.25 (tre)
9/84-87 Corona AT, CT, ST150 BJ233 TE648 TE648 TE648 - Female RHT M14 x 1.5
(TE9305) (TE9305)
9/84-87 Corona AT, CT, ST150 BJ260 TE648 TE648 TE648 - Female RHT M14 x 1.5
3 bolt mount
1987-on Corona AT170,ST17,CT170,ET176V,CT176V TE2821L TE2821R RE1032 Front

RH-STB8003
LH-STB8002
Rear
STB8124
1989-on Corona ST18 RE1019
8/88-8/92 Corona AT175 4WD RE704
1992-on Corona ST19, AT19, CT19 TE2991L TE2991R RE1036 Front

RH-STB8004
LH-STB8005
Rear
STB8124
all Corona ST170 RE6426

266mm long
CORONA MKII (MX SERIES)

1972-77 Corona MX10,MX13,MX22,MX23 BJ128 BJ129 SX4213 TE506L TE506L TE506R TE506R SX5214
NLA NLA
CRESSIDA
12/79-80 Cressida MX32,MX36 BJ314 SX2290 TE489L TE489L TE650 TE650 TR642 SX1662 BJ314 - press in Body dia. 44mm
(BJ232) SX2290 - 101mm c/c b/w mount holes BLD 13mm
OD 44.00mm LH Thread LH Thread

KING PIN LINK
SET
YEAR MODEL
9/80-84 Cressida MX62 sedan & wagon - manual steer BJ314 SX2390 TE489L TE489L TE651 TE651 TR643 SX1662 BJ314 - press in Body dia. 44mm
(BJ232)
9/80-84 Cressida MX62 sedan & wagon - power steer BJ314 SX2391 TE489L TE489L TE651 TE651 TR643 SX1662 BJ314 - press in Body dia. 44mm
(BJ232)
8/84-8/88 Cressida MX73 sedan BJ314 TE647 TE647 RH-RE882R BJ314 - press in Body dia. 44mm
And early MX83 (in Australia) (BJ232) LH-RE882L RE882L - has double thread on socket end
8/88-92 Cressida MX83 BJ314 TE647 TE647 RH-RE912R BJ314 - press in Body dia. 44mm
(BJ232) LH-RE912L
OD 44.00mm (RE7121/RE7122)
ball joint
1984-on Cressida MK11, SX7,LX,GX71,MX71 TE647 TE647 RE705
1992-on Cressida MK11,GX90,LX90,SX90,JZJ90 TE3511 TE3511 RE1037

JZX9#
CROWN
1964-8/67 Crown RS40,RS41,MS41,MS45,MS46 BJ66 BJ67 TE180L TE180L
9/67-71 Crown RS50,RS60,MS53,MS57,RS56,MS55 BJ309 BJ115 SX1129 TE180L TE180L TE3605R TE3605R SX9025 SX1129 - slight bend in arm
(BJ114) NLA NLA BJ309 - 4 bolt mount BLD 15.23mm
2/71-12/72 Crown MS65,MS67,MS70,MS75 BJ309 BJ115 SX1129 TE541L TE541L TE9316R TE9316R SX9075 SX1129 - slight bend in arm
1/73-9/74 Crown MS65,MS67,MS70,MS75 BJ309 BJ115 SX1129 TE541L TE541L TE9316R TE9316R SX0995 SX1129 - slight bend in arm
10/74-8/79 Crown MS83,MS85 - manual steer BJ309 BJ162 SX1211 TE541L TE541L TE542R TE542R SX5217 SX1211 - straight arm
(BJ114) SX5217 - 180mm o/all 135mm c/c 41 splines
10/74-8/79 Crown MS83,MS85 - power steer BJ309 BJ162 SX1129 TE541L TE541L TE542R TE542R SX5485 SX1129 - slight bend in arm
(BJ114) NLA BJ309 - 4 bolt mount BLD 15.23mm
9/79-83 Crown MS111,MS112 - manual steer BJ309 BJ162 SX1211 TE541L TE541L TE542R TE542R TR952 SX9175 SX1211 - straight arm

KING PIN LINK
SET
YEAR MODEL
(BJ114) or In some cases SX9175 will not fit MS112 crown

SX1228 Check pitman arms prior to ordering!
9/79-83 Crown MS111,MS112 - power steer BJ309 BJ162 SX1129 TE541L TE541L TE542R TE542R TR952 SX9175 SX1129 - slight bend in arm
(BJ114) NLA or In some cases SX9175 will not fit MS112 crown
SX1228 Check pitman arms prior to ordering!
8/83-8/87 Crown MS123 BJ309 BJ310 SX1230 TE801L TE801L TE802R TE802R TR402 SX1228 BJ309 - 4 bolt mount BLD 15.23mm
(BJ114) (TE642L) (TE642L) (TE711R) (TE711R) NLA
9/87-91 Crown MS13# series BJ309 BJ162 SX1231 TE801L TE801L TE802R TE802R SX2580 BJ309 - 4 bolt mount BLD 15.23mm
(BJ114) (TE642L) (TE642L) (TE711R) (TE711R) (SX1212)
ECHO
2000-02 Echo BJ3602 TE9026L TE9026R RE3600 For Ball Joint inc. arm - use BJ9035L & BJ9035R
(RE6441)
99-02
2003-on Echo BJ3602 TE648 TE648 For Ball Joint inc. arm - use BJ9035L & BJ9035R
iQ
1/09-on iQ
AJ1
LEXCEN
10/88-10/91 Lexcen VN,VP - manual steer BJ166 & TE738 TE738 RE823
BJ166OS or or (P191012)
(oversize) TE526R TE526R
10/88-6/93 Lexcen VN,VP - power steer BJ166 & TE738 TE738 RE824
BJ166OS or or (P191012)
(oversize) TE526R TE526R
7/93-on Lexcen VR,VS RH-BJ366R TE750 TE750 RE827

(BJ300R) (P191031)
LH-BJ366L (RE951)
(BJ300L)
LEXUS - see LEXUS (AS MAKE)
MR2
6/84-89 MR2 AW10 AW11 sports coupe BJ234 - front TE649 TE649 RE2660 Front BJ231 - four wheel steer rear ball joints
BJ231 - rear (TE624R) (TE624R) STB8013

KING PIN LINK
SET
YEAR MODEL
Rear
STB7806
12/89-94 MR2 SW20 sports coupe BJ234 - front TE4547 TE4546 RE1021 Front BJ231 - four wheel steer rear ball joints
BJ231 - rear (TE7133) (TE7130) (RE4553) STB7807
Rear
STB7808
10/00-10/05 MR2 30 series
PASEO
1/91-11/95 Paseo EL44 RH-BJ551R TE572 TE572 RE2740
LH-BJ552L (TE2941) (TE2941) (RE2940)
11/95-00 Paseo EL54 RH-BJ551R TE572 TE572 RH-RE912R Front

LH-BJ552L (TE2941) (TE2941) LH-RE912L STB7809
PRIUS
8/03-on Prius TE4414L TE4414R
RAV4 - see TOYOTA - Commercial
SOARER
2/81-86 GZ1#, MZ1# BJ314 TE640R TE640R RE878 TR640 BJ314 - press in Body dia. 44mm
(BJ232)
1/86-4/91 GZ2#, MZ2# BJ360 RE879 TR3530 BJ360 - 3 bolt bount - bracket approx. 45deg
(BJ435) to ball stud housing
5/91-on JZZ3#, UZZ3# BJ2946 RH-BJ6865 RE3520 Front RE3520 - 232mm 14x1.5 (socket) 14x1.5 (tre)
LH-BJ6965 (RE29295) STB4209
120mm
Rear
STB4208
63mm
SPRINTER COUPE
1983-86 Sprinter Coupe AE86 1.6lt - manual steer BJ145 TE803R TE803R RE862

KING PIN LINK
SET
YEAR MODEL
1983-86 Sprinter Coupe AE86 1.6lt - power steer BJ145 TE803R TE803R RE868
STARLET
1978-80 Starlet KP6
1984-90 Starlet EP70,NP70 (imported) BJ272 RE701
1990-99 Starlet EP80,NP80,EP90,NP90 RH-BJ551R TE572 TE572 RE2940

manual steer LH-BJ552L manual
1990-99 Starlet EP80,NP80,EP90,NP90 RH-BJ551R TE572 TE572 RE3570

power steer LH-BJ552L power
SUPRA
1981-86 Supra MA61,SA63 - manual steer BJ314 TE640R TE640R RE878 BJ314 - press in Body dia. 44mm
(BJ232) RE878 - 190mm 14x1.5 (socket) 14x1.5 (tre)
1981-86 Supra MA61,SA63 - power steer BJ314 TE641R TE641R RE878 BJ314 - press in Body dia. 44mm
(BJ232) RE878 - 190mm 14x1.5 (socket) 14x1.5 (tre)
2/86-4/93 Supra MA70 BJ360 TE3686R TE3686R RE878 Front RE878 - 190mm 14x1.5 (socket) 14x1.5 (tre)
or RE879 STB4209 RE879 - 244mm 14x1.5 (socket) 14x1.5 (tre)
108mm
Rear
2/86-4/93 Supra MA71 BJ360 TE3686R TE3686R RE3520 STB4209 BJ360 - 3 bolt bount - bracket approx. 45deg
(RE29295) 108mm to ball stud housing
1993-98 Supra JZA80 Front

STB8014
Rear
STB4209
75mm
T18 - see COROLLA

KING PIN LINK
SET
YEAR MODEL
TERCEL
5/82-1/88 Tercel Wagon AL20,AL25 - manual steer BJ234 TE3645L TE3645R RE868 RH-TR645R Tie rod ends - same as side rods - 275mm long
LH-TR645L RE868 - 158mm 14x1.5 (socket) 14x1.5 (tre)
5/82-1/88 Tercel Wagon AL20,AL25 - power steer BJ234 TE3646L TE3646R RE868 RH-TR646R Tie rod ends - same as side rods - 265mm long
LH-TR646L RE868 - 158mm 14x1.5 (socket) 14x1.5 (tre)
2/88-90 Tercel BJ2702 TE648 TE648 TE648 - Female RHT M14 x 1.5
1991-99 Tercel RH-BJ2942R TE2942 TE2942

LH-BJ2942L
VIENTA - see CAMRY
YARIS
2003-on Yaris BJ4192 TE2301L TE2301R RE7801 BJ4192 - Ball Joint Only
or BJ9135/9136 - Arms inc. Ball Joint
RH-BJ9135 RE7801 - 252mm 14x1.5 (socket) 14x1.5 (tre)
LH-BJ9136
TOYOTA - Commercial
BLIZZARD
1982-84 Blizzard LD10 TE712L TE600R TE712L - 322mm 22x1.5 LHT BLD 16.45mm
TE600R - 93mm 20x1.5 RHT BLD 16.45mm
1984-on Blizzard LD20, LD21 TE631R TE699R TE700L TR647
BUNDERA - see LANDCRUISER
COASTER
10/69-72 Coaster RU1#, JU1#, BU1#, BB1#, RB1# KX247 TE654L TE654R King pin set - 25mm x 154mm
2/72-79 Coaster RU1#, JU1#, BU1#, BB1#, RB1# KX247 TE598L TE597R King pin set - 25mm x 154mm
TE598L - 100mm 21x1.5 BLD 16.42mm
LH Thread RH Thread TE597R - Male RHT M21x1.5

KING PIN LINK
SET
YEAR MODEL
1979-82 Coaster RU1#, JU1#, BU1#, BB1#, RB1#, BU61 KX261 TE598L TE597R King pin set - 28mm x 159mm
TE598L - 100mm 21x1.5 BLD 16.42mm
5/82-93 Coaster RB2#, BB2#, BB3#, HB3#, BJ263 RH-BJ8068 SX2490 TE655L TE655L TE656 TE656 TR9175 TR9185 TR2490 TE655L - 95.5mm 20x1.5 BLD 20.65mm
HZB3#, HDB20, HDB30# LH-BJ8069 NLA (TE656R) (TE656R) BJ9095 - can use BJ9095 in place of
(without pivot) LH Thread LH Thread BJ263 but not vice versa.
1/93-on Coaster BB4#, HDB5#, HZB4#, HZB5# BJ9095 RH-BJ9015 SX2490 TE3551 TE3551 TE656 TE656 TR3550 TR9215 TR9105 BJ9095 - can use BJ9095 in place of
LH-BJ9018 NLA (TE656R) (TE656R) BJ263 but not vice versa.
(without pivot)
DA SERIES
1962-on DA100, DA115, FA90, FA100 KX415
1969-84 DA115 truck, DR10, DR15bus 6ton KX263 TE389L TE389R King pin set - 40mm x 216mm
DYNA
up to 1969 Dyna RK150, RK106, RK170 series KX246 TE598L TE597R TE598L - 100mm 21x1.5 BLD 16.42mm
TE597R - Male RHT M21x1.5
LH Thread RH Thread
1969-72 Dyna RU10,RU12,RU15 - 2000/2500kg KX247 King pin set - 25mm x 154mm
1972-78 Dyna RU10/12/15/20/30,BU10/20/32/36, KX247 TE598L TE597R King pin set - 25mm x 154mm
HU10/15/30/40/50 TE598L - 100mm 21x1.5 BLD 16.42mm
1978-83 Dyna RU10/12/15/20/30,BU10/20/32/36, KX262 TE598L TE597R King pin set - 28mm x 160mm
HU10/15/30/40/50 TE598L - 100mm 21x1.5 BLD 16.42mm
1984 Dyna BU40, BU50 KX430 King pin set - 35mm x 205.5mm
1984-87 Dyna BU60 KX428 TE655L TE655R King pin set - 28mm x 160mm
TE655L - 95.5mm 20x1.5 BLD 20.65mm
84-8/87 Dyna BU77,BU85,BU88,BU93,BU98 KX428 TE598L TE597R King pin set - 28mm x 160mm with 2 roller bearings
TE598L - 100mm 21x1.5 BLD 16.42mm

84-8/87 Dyna WU90, BU90/95, HU40 KX431 TE655L TE655R Please note: it has been identified that some
male end male end vehicles in this model range were fitted with
or or female tie rod ends. Please check prior to

KING PIN LINK
SET
YEAR MODEL
TE7655L TE7655R ordering.

female end female end TE655L - 95.5mm 20x1.5 BLD 20.65mm
1985-on Dyna YU60/62, BU61/65 KX428 TE655L TE655R Please note: it has been identified that some
male end male end vehicles in this model range were fitted with
or or female tie rod ends. Please check prior to
TE7655L TE7655R ordering.
female end female end TE655L - 95.5mm 20x1.5 BLD 20.65mm
8/85-87 Dyna LY60/61 KX426 TE598L TE597R TE598L - 100mm 21x1.5 BLD 16.42mm
LH Thread RH Thread
1987-on Dyna LY60/61 KX428 TE598L TE597R TE598L - 100mm 21x1.5 BLD 16.42mm
LH Thread RH Thread
8/85-7/89 Dyna YH80,LH80 - truck BJ302 BJ303 SX2790 TE540L TE540L TE643R TE643R TR2481 TR9165 TR9195 BJ303 - 4 bolt mount BLD 18mm
(BJ236) (BJ237) RH Thread RH Thread If taper on BJ303 is too large - use BJ225
LH Thread LH Thread NOTE - TRW / PAJA used to reference
4 bolt mount BJ302 for Corolla - confirm vehicle
application if ordered by part number
8/89-93 Dyna KZH100, 110 - truck BJ837 BJ303 SX2790 TE540L TE540L TE643R TE643R TR2481 TR9165 TR9195 BJ303 - 4 bolt mount BLD 18mm
(BJ237) RH Thread RH Thread If taper on BJ303 is too large - use BJ225
LH Thread LH Thread
99-on Dyna XZU301 TE9256L TE9416R
99-on Dyna XZU334 TE9266L TE9426R
4 RUNNER
1983-88 LN60,YN60 not required not required TE659R TE658L TE442K** ** Drag link repair kit - TE442K suits some models
(TE3674R) (TE658)

KING PIN LINK
SET
YEAR MODEL
8/85-8/88 LN61,LN66,YN63,RN61,RN66,YN63, BJ500 BJ265 SX1215 TE540L TE540L TE702R TE702R SX5720 BJ500 - 4 bolt mount BLD 17.17mm
VZN66,YZN61 (BJ264) (SX1216) BJ265 - 4 bolt mount BLD 18.02mm
SX1215 - 3 bolt mount - 155mm c/c arm
8/88-8/91 RN130,RN135,YN130,YN135,LN130,LN135, VZN130 BJ500 BJ502 SX1215 TE540L TE540L TE702R TE702R SX5720 Front BJ500 - 4 bolt mount BLD 17.17mm
with independent front suspension (inc. Surf) (BJ264) (BJ503) (SX1216) RH-STB8009 BJ502 - 4 bolt mount BLD 18.02mm
inc. SURF 155mm arm LH-STB8010 SX1215 - 3 bolt mount - 155mm c/c arm
8/91-1995 RN130,RN135,YN130,YN135,LN130,LN135, VZN130 BJ500 BJ502 SX9375 TE540L TE540L TE702R TE702R SX5300 Rear BJ500 - 4 bolt mount BLD 17.17mm
with independent front suspension (inc. Surf) (BJ264) (BJ503) 159mm arm (SX5250) STB8125 BJ502 - 4 bolt mount BLD 18.02mm
inc. SURF SX9375 - 3 bolt mount - 159mm c/c arm
1996-02 RZN18#, VZN18# BJ9016 RH-BJ3804R TE3561L TE3561R RE9075 RE9075 - 148mm 18x1.5 (socket) F20x1.5 (tre)
LH-BJ3804L
2003-05 GRN21#, UZN21# BJ3841 BJ3842 TE3841 TE3841 RE3840 RE3840 - 276mm 22x1.5mm (socket) - 15x1.5 (tre)
2005-on KUN51, TGN51 BJ9490 RE3880 RE3880 - 310mm 14x1.5 (socket) 15x1.5 (tre)
(BJ3882)
HIACE - Van, Wagon & Commuter (also see HIACE - Truck)

9/67-1/71 Hiace PH10,RH15 - van, wagon, commuter BJ66 BJ67 TE450L TE450R RH-TR211R DL402 BJ67 - 14mm ball bolt thread - use '555' brand only
12mm x 1.25mm ball bolt thread LH-TR211L some models DL402 - check before ordering
Bolt In
2/71-1/72 Hiace PH1#, RH10, RH11 - van, wagon, commuter BJ66 BJ67 SX4218 TE484L TE484R RH-TR648R DL402 BJ67 - 14mm ball bolt thread - use '555' brand only
bell crank 14mm x 1.25mm ball bolt thread LH-TR648L DL402 - 380mm c/c ball studs offset approx. 45deg
Bolt In SX4218 - boomerang shape
2/72-11/75 Hiace PH1#, RH10, RH16 - van, wagon, commuter BJ66 BJ127 SX1160 TE484L TE484L TE485R TE485R TR649 TR2110 DL402 SX1160 - 2 bolt mount
(16mm) 2 bolt mount RH Thread RH Thread BJ127 - 16mm ball bolt thread
LH Thread LH Thread 350mm long 560mm box to TR2110 - 560mm c/c b/w holes
bell crank DL402 - 380mm c/c ball studs offset approx. 45deg
12/75-1/77 Hiace PH1#, RH10, RH16 - van, wagon, commuter BJ66 BJ127 SX1160 TE484L TE484L TE485R TE485R TR649 TR2111 DL402 SX1160 - 2 bolt mount

KING PIN LINK
SET
YEAR MODEL
2 bolt mount RH Thread RH Thread TR2111 - 615mm c/c b/w holes

LH Thread LH Thread 350mm long box to TR2111 - 'bump' points down with ball stup up
bell crank DL402 - 380mm c/c ball studs offset approx. 45deg
2/77-11/82 Hiace RH11, RH2#, RH3#, RH4# - van, wagon, commu BJ66 BJ127 SX1160 TE484L TE484L TE485R TE485R TR649 TR2180 DL402 SX1160 - 2 bolt mount
Hiace LH11, LH2#, LH3# - van, wagon, commuter 2 bolt mount RH Thread RH Thread bell crank TR2180 - 618mm c/c b/w holes
LH Thread LH Thread 350mm long to idler box to DL402 - 380mm c/c ball studs offset approx. 45deg
616mm bell crank
12/82-8/85 Hiace LH50, LH60, LH70 - van and commuter BJ302 BJ303 SX4260 TE540L TE540L TE643R TE643R TR451 TR500 TR501 SX4260 - 3 bolt mount
Hiace YH5#, YH6#, YH7# - van and commuter (BJ236) (BJ237) 3 bolt mount RH Thread RH Thread TR501 - 450mm 45deg offset ends
Male LHT Male LHT adj to 480mm 665mm c/e 450mm BJ303 - 4 bolt mount BLD 18mm
4 bolt mount 4 bolt mount M17 x 1.5 M17 x 1.5 523mm box to If taper on BJ303 is too large - use BJ225
bell crank TR500 - 665mm c/e ball stud one end only
TR500 - 523mm c/c b/w holes
12/82-8/85 Hiace LH50, LH60, LH70 - wagon BJ302 BJ303 SX4260 TE540L TE540L TE643R TE643R TR451 TR4505 TR501 SX4260 - 3 bolt mount
Hiace YH5#, YH6#, YH7# - wagon (BJ236) (BJ237) 3 bolt mount RH Thread RH Thread wagon TR501 - 450mm 45deg offset ends
Male LHT Male LHT only 450mm BJ303 - 4 bolt mount BLD 18mm
4 bolt mount 4 bolt mount M17 x 1.5 M17 x 1.5 If taper on BJ303 is too large - use BJ225
9/85-7/89 Hiace LH51, LH61, LH71 - van and commuter BJ302 BJ303 SX2790 TE540L TE540L TE643R TE643R TR2481 TR500 TR501 TR501 - 450mm 45deg offset ends
(BJ236) (BJ237) RH Thread RH Thread BJ303 - 4 bolt mount BLD 18mm
or Male LHT Male LHT 665mm 450mm If taper on BJ303 is too large - use BJ225
4 bolt mount 4 bolt mount SX4260 M17 x 1.5 M17 x 1.5
3 bolt mount
9/85-7/89 Hiace LH51, LH61, LH71 - wagon BJ302 BJ303 SX2790 TE540L TE540L TE643R TE643R TR2481 TR4505 TR501 TR501 - 450mm 45deg offset ends
(BJ236) (BJ237) RH Thread RH Thread wagon BJ303 - 4 bolt mount BLD 18mm
or Male LHT Male LHT only 450mm If taper on BJ303 is too large - use BJ225
3 bolt mount
9/85-7/89 Hiace YH5#, YH6#, YH7# - van and commuter BJ302 BJ303 SX2791 TE540L TE540L TE643R TE643R TR2481 TR500 TR501 TR501 - 450mm 45deg offset ends
(BJ236) (BJ237) 2 bolt mount RH Thread RH Thread BJ303 - 4 bolt mount BLD 18mm
or Male LHT Male LHT 450mm If taper on BJ303 is too large - use BJ225
3 bolt mount
9/85-7/89 Hiace YH5#, YH6#, YH7# - wagon BJ302 BJ303 SX2791 TE540L TE540L TE643R TE643R TR2481 TR4505 TR501 SX4260 - 3 bolt mount
(BJ236) (BJ237) 2 bolt mount RH Thread RH Thread wagon TR501 - 450mm 45deg offset ends
or Male LHT Male LHT only 450mm BJ303 - 4 bolt mount BLD 18mm
4 bolt mount 4 bolt mount SX4260 M17 x 1.5 M17 x 1.5 If taper on BJ303 is too large - use BJ225
3 bolt mount

KING PIN LINK
SET
YEAR MODEL
8/89-7/93 Hiace KZH100/110/120 - van, wagon, commuter BJ837 BJ303 TE994 TE994 RE1022 RE1022 - 293mm 14x1.5 (socket) 17x1.5 (tre)
(BJ237) (RE998) TE994 - 127mm 17x1.5 female BLD 14.6mm
4 bolt mount Female RHT Female RHT (RE7123) BJ303 - 4 bolt mount BLD 18mm
8/89-7/93 Hiace LH100/102/103/110/113/115/120/123 BJ837 BJ303 TE994 TE994 RE1022 RE1022 - 293mm 14x1.5 (socket) 17x1.5 (tre)
125/140 - van, wagon, commuter (BJ237) (RE998) TE994 - 127mm 17x1.5 female BLD 14.6mm
4 bolt mount M17 x 1.5 M17 x 1.5 If taper on BJ303 is too large - use BJ225
8/89-7/93 Hiace RZH10#, RZH11#, RZH12# - van, wagon, comm BJ837 BJ303 TE994 TE994 RE1022 RE1022 - 293mm 14x1.5 (socket) 17x1.5 (tre)
8/93-on Hiace KZH100/110/120 - van, wagon, commuter BJ837 BJ303 TE994 TE994 RE1022 RE1022 - 293mm 14x1.5 (socket) 17x1.5 (tre)
8/93-on Hiace LH100/102/103/110/113/115/120/123 BJ837 BJ303 TE994 TE994 RE1022 RE1022 - 293mm 14x1.5 (socket) 17x1.5 (tre)
125/140 - van, wagon, commuter (BJ237) (RE998) TE994 - 127mm 17x1.5 female BLD 14.6mm
8/93-7/95 Hiace RZH10#, RZH11#, RZH12# - van, wagon, comm BJ837 BJ303 TE994 TE994 RE1022 RE1022 - 293mm 14x1.5 (socket) 17x1.5 (tre)
4 bolt mount Female RHT Female RHT (RE7123)
4 bolt mount M17 x 1.5 M17 x 1.5
8/95-on Hiace LH103/113/125, RZH103/113/125 RH-BJ1277R BJ3682 TE9325 TE9325 RE998 Front RE998 - 293mm 14x1.5 (socket) 17x1.5 (tre)
manual steer LH-BJ1278L (RE9505) RH-STB8127 BJ3682 - 4 bolt mount butterfly style
inc. Arm 4 bolt mount manual LH-STB8128
8/95-05 Hiace LH103/113/125, RZH103/113/125 RH-BJ1277R BJ3682 TE9325 TE9325 RE9565 Front BJ3682 - 4 bolt mount butterfly style
Hiace LH110, 11#, 12#, 16#, 17#, 18# (BJ8066) p/steer RH-STB8127
KZH10#, 11#, 126, 13# LH-BJ1278L 4 bolt mount LH-STB8128
RZH10#, 11#, 12#, 133 (BJ8067)

inc. Arm
2005-2008 Hiace KHD200 series - with ABS RH-BJ1279 BJ3972 TE3971 TE3971 RE3970
LH-BJ1280
inc. Arm
2005-2008 Hiace KHD200 series - no ABS RH-BJ1281 BJ3972 TE3971 TE3971 RE3970

KING PIN LINK
SET
YEAR MODEL
LH-BJ1282
inc. Arm
HIACE - Truck
2/77-11/79 Hiace RH11 - truck BJ66 BJ127 SX1160 TE484L TE484L TE485R TE485R TR649 TR2180 DL402 SX4260 - 3 bolt mount
RH Thread RH Thread
12/79-7/85 Hiace RH24, LH24 - truck BJ66 BJ127 SX1160 TE484L TE484L TE485R TE485R TR649 TR2180 DL402 SX4260 - 3 bolt mount
RH Thread RH Thread
8/85-7/89 Hiace YH80, LH80 - truck BJ302 BJ303 SX2790 TE540L TE540L TE800R TE800R TR2481 TR9165 TR9195 NOTE - TRW / PAJA used to reference BJ302
(BJ236) (BJ237) (TE643R) (TE643R) for Corolla - confirm vehicle application
LH Thread LH Thread RH Thread RH Thread if ordered by part number
4 bolt mount
11/87-89 Hiace LH85 - truck - 4WD BJ265 TE994 TE994 RE9145
10/89-on Hiace LH85 - truck - 4WD BJ3682 TE994 TE994 RE2871
1995-on LY10#, LY11#, YY101 TE800R TE800R

(TE643R) (TE643R)
HILUX 2WD
3/68-4/72 Hilux RN1# 2WD BJ309 BJ67 SX1165 TE452L TE451L TE454R TE454R BJ67 - 14mm ball bolt thread - use '555' brand only
(BJ114) 12mm x 1.25mm ball bolt thread BJ309 - 4 bolt mount BLD 15.23mm
Bolt In
5/72-73 Hilux RN2# 2WD BJ309 BJ127 SX2200 TE487L TE486L TE488R TE488R RH-TR650R SX5227 BJ309 - 4 bolt mount BLD 15.23mm
(BJ114) idler arm 14mm x 1.25mm ball bolt thread LH-TR650L
Male LHT Male LHT Male RHT Male RHT
M17 x 1.5 M17 x 1.5 M17 x 1.5 M17 x 1.5
1/73-7/78 Hilux RN2# 2WD BJ309 BJ127 SX1200 TE487L TE486L TE488R TE488R RH-TR650R SX5201 BJ309 - 4 bolt mount BLD 15.23mm
(BJ114) 2 bolt mount Male LHT Male LHT Male RHT Male RHT LH-TR650L
M17 x 1.5 M17 x 1.5 M17 x 1.5 M17 x 1.5
8/78-10/83 Hilux RN3#, RN4# 2WD BJ309 BJ127 SX1145 TE540L TE540L TE569R TE569R TR651 TR2300 TR2300 - 765mm c/c length
Hilux LN3#, LN4# 2WD (BJ114) 3 bolt mount TR2300 - 565mm c/c between holes
Male LHT Male LHT Male RHT Male RHT 765mm c/c BJ309 - 4 bolt mount BLD 15.23mm
M17 x 1.5 M17 x 1.5 M17 x 1.5 M17 x 1.5
11/83-89 Hilux LN5#, YN5# 2WD BJ300 BJ301 SX1220 TE540L TE540L TE569R TE569R TR651 TR2470 NOTE - TRW / PAJA used to reference BJ301

KING PIN LINK
SET
YEAR MODEL
RN5# (BJ238) (BJ239) 3 bolt mount for Toyota Camry - confirm vehicle application
Male LHT Male LHT Male RHT Male RHT 765mm c/c if ordered by part number
M17 x 1.5 M17 x 1.5 M17 x 1.5 M17 x 1.5
9/88-on Hilux YN8#, LN8#, RN8# 2WD BJ300 BJ371 SX2830 TE540L TE540L TE569R TE569R TR651 TR2830 1990-95 Upper Inner Shaft Kit - SK2081
Hilux LN90, RN90, YN92 2WD (BJ238) (BJ832) 3 bolt mount Front TR2830 - 770mm c/c length
4 bolt mount Male LHT Male LHT Male RHT Male RHT 770mm c/c STB8020 TR2830 - 560mm c/c between holes
M17 x 1.5 M17 x 1.5 M17 x 1.5 M17 x 1.5 Rear SX2830 - tapered hole 13.8 - 12.6mm
STB8125 BJ300 - 4 bolt mount BLD 15mm
1989-95 Hilux KZN130, LN13#, VZN130, YN130 Front

STB8020
Rear
STB8125
1995-on Hilux KZN185, RZN18#, VZN18# BJ9016 RH-BJ3562R TE3561L TE3561R RE9075 RE9075 - 148mm 18x1.5 (socket) F20x1.5 (tre)
LH-BJ3562L
10/97-12/03 Hilux LN147, LN145, LN15#, RZN147, BJ9125 BJ371 SX2830 TE540L TE540L TE569R TE569R TR295 Upper Inner Shaft Kit - SK2081
RZN152, RN149, RZN149 4 bolt mount (BJ832) 3 bolt mount
Male LHT Male LHT Male RHT Male RHT 765mm c/c
M17 x 1.5 M17 x 1.5 M17 x 1.5 M17 x 1.5
1/02-on Hilux RZN21#, VZN21#, KDN215, TRN21# (inc. Surf) BJ3841 BJ3842 TE3841 TE3841 RE3840 RE3840 - 276mm 22x1.5mm (socket) - 15x1.5 (tre)
press in Female RHT Female RHT

15x1.5 15x1.5
2005-on Hilux KUN1#, KUN2# 2WD BJ3881 BJ9490 TE9251 TE9251 RE3880 RE3880 - 310mm 14x1.5mm (socket) - 15x1.5 (tre)
press in (BJ3882) Female Female Recovery Tow Point - RPHIL05

47.4mm OD 15x1.5 15x1.5
bj300 bj9125

KING PIN LINK
SET
YEAR MODEL
HILUX 4WD
10/79-9/81 Hilux RN36, RN37, RN47 4WD SX3570 TE3671R TE540L TR2400 TE442K TE442K - Drag link repair kit (2 per drag link)
non IFS Strg Knuckle Arm repair kit BS351 - Steering Knuckle Arm Ball Stud
10/81-10/83 Hilux RN38/39/48, LN36/46 4WD not required not required SX3570 TE3672R TE540L TR2401 TE442K TE442K - Drag link repair kit (2 per drag link)
non IFS Strg Knuckle Arm 17mm thread repair kit BS351 - Steering Arm Ball Stud
Swivel Hub Kit - SHBKT60
11/83-88 Hilux LN60/65, YN60/62/65/67 4WD not required not required SX3570 TE659R TE658L TR652 TR6589 TE442K SX5312 TR652 - consists of TE658/TE659/990mm long tube
non IFS Strg Knuckle Arm (TE3674R) repair kit (can use TE659R - has provision for steering damper
21mm thread or SX5140) TE442K - Drag link repair kit (2 per drag link)
DL070 BS351 - Steering Arm Ball Stud
Drag Link DL070 - 510mm e/e
or Swivel Hub Kit - SHBKT60
DL070E
Z shape to suit 2-5" lift
8/88-3/90 Hilux RN105,LN105/106,YN106 4WD not required not required SX3570 TE659R TE658L TR652 TR6589 TE442K SX5160 TR652 - consists of TE658/TE659/990mm long tube
non IFS Strg Knuckle Arm (TE3674R) repair kit m/steer TE659R - has provision for steering damper
21mm thread or up to 8/90 TE442K - Drag link repair kit (2 per drag link)
DL070 DL070 - 510mm e/e
Drag Link BS351 - Steering Arm Ball Stud
or Swivel Hub Kit - SHBKT60
DL070E
4/90-8/97 Hilux RN105,LN105/106,YN106 4WD not required not required SX3570 TE3721 TE3720 TR2840 TE442K SX5140 1990-95 TE442K - Drag link repair kit (2 per drag link)
non IFS Strg Knuckle Arm (TE2842) (TE2841) repair kit 8/90-on Front DL070 - 510mm e/e
or non IFS STB8020 BS351 - Steering Arm Ball Stud
DL070 Rear Swivel Hub Kit - SHBKT60
Drag Link STB8125
or
DL070E
8/85-88 Hilux YN61/63,LN61/66,RN61/66,YZN61,VZN66 4WD BJ500 BJ265 SX1215 TE540L TE540L TE702R TE702R TR2720 SX5720 BS351 - Steering Arm Ball Stud
8/88-3/89 Hilux RN101/106/110/126/130 4WD (BJ264) (SX1216) SX561 - RH Steering Arm
Hilux LN107/111/130/135 4WD BJ500 - 4 bolt mount BLD 17.17mm
Hilux YN130/135,VZN100/105/110/130/131 4WD BJ265 - 4 bolt mount BLD 18.02mm
with independent front suspension SX1215 - 3 bolt mount - 155mm c/c arm

KING PIN LINK
SET
YEAR MODEL
4/89-7/91 Hilux RN101/106/110/126/130 4WD BJ500 BJ502 SX1215 TE540L TE540L TE702R TE702R TR2720 SX5720 BS351 - Steering Arm Ball Stud
Hilux LN107/111/130/135 4WD (BJ264) (BJ503) (SX1312) (SX1216) SX561 - RH Steering Arm
Hilux YN130/135, VZN100/105/110/130/131 4WD BJ500 - 4 bolt mount BLD 17.17mm
with independent front suspension BJ502 - 4 bolt mount BLD 18.02mm
SX1215 - 3 bolt mount - 155mm c/c arm
8/91-on Hilux RN101/106/110/126/130 4WD BJ500 BJ502 SX9375 TE540L TE540L TE702R TE702R TR2720 SX5300 1990-95 BS351 - Steering Arm Ball Stud
Hilux LN107/111/130/135 4WD (BJ264) (BJ503) (SX5250) Front SX561 - RH Steering Arm
Hilux YN130/135,VZN100/105/110/130/131 4WD (SX2860) STB8020 BJ500 - 4 bolt mount BLD 17.17mm
with independent front suspension Rear BJ502 - 4 bolt mount BLD 18.02mm
STB8125 SX9375 - 3 bolt mount - 159mm c/c arm
1995-00 Hilux RN130,RN135,RZN140,YN130, RH-BJ563 RH-BJ561 TE3561L TE3561R RE9075 RE9075 - 148mm 18x1.5 (socket) F20x1.5 (tre)
YN135,VZN130,VZN150 - with IFS LH-BJ564 LH-BJ562
with independent front suspension
8/97-2/05 Hilux KZN165, LN16#, LN17#, LN19#, BJ500 BJ502 SX9445 TE540L TE540L TE702R TE702R TR2720 Not DL070 SX3630 BS351 - Steering Arm Ball Stud
RZN16#, RZN174, RZN19# (BJ264) (BJ503) (TE3631) (TE3631) (TE3632) (TE3632) with IFS SX561 - RH Steering Arm
VZN167, VZN172 BJ500 - 4 bolt mount BLD 17.17mm
with independent front suspension Male LHT Male LHT Male RHT Male RHT For IFS Drag Link from 98-02/05 - BJ502 - 4 bolt mount BLD 18.02mm
M17x1.5 M17x1.5 M17x1.5 M17x1.5 different from DL070. Later Drag Link
has no obvious wearable parts. Main
wearing items are tie rod ends, idler or
pitman. If Rod is bent - replacement
1995-on Hilux KZN185, RZN18#, VZN18# BJ9016 RH-BJ3562R TE3561L TE3561R RE9075 will need to be sourced from genuine RE9075 - 148mm 18x1.5 (socket) F20x1.5 (tre)
KZJ9#, RZJ9#, VZJ9# (BJ3561) LH-BJ3562L or wrecker.
strut front end with coil over suspension
2005-on Hilux KUN2#, GGN# 4WD BJ3881 BJ9490 TE9881 TE9881 RE3880 RE3880 - 310mm 14x1.5 (socket) 15x1.5 (tre)
Recovery Tow Point - RPHIL05

KING PIN LINK
SET
YEAR MODEL
bj3562l te3561l te540l te702r
KLUGER
00-03 Kluger RH-BJ3752R TE1452 TE1451 RE3900
ACU2#, MCU2# LH-BJ3752L
03-on Kluger TE9435 TE9435 RE3901

ACU2#, MCU2#
08-on Kluger TE4391L TE4391R RE3902

GSU4#

KING PIN LINK
SET
YEAR MODEL
Landcruiser
"REAR" "FRONT"
Track Tie Rod Ends Relay Rod Ends
Left Right Left Right
1959-63 Landcruiser FJ40,FJ45 TE471R TE471R TE471R TE471L TE442K TE442K - Drag Link Repair Kit
6 cylinder petrol Swivel Hub Kit FJ45 - SHBKT60
17x1.5 RHT 17x1.5 RHT 17x1.5 RHT 17x1.5 LHT
Track Rod End Track Rod End Relay Rod End Relay Rod End
2/74-84 Landcruiser BJ4# SX5402 TE470L TE469R TE471L TE471R TR4520 TR4620 TE472L 5 piece repair kit - TE469/5KIT (TE660) - A
1964-81 Landcruiser FJ4# Relay Rod Track Rod end only TE472L - Male LHT M17x1.5
1979-84 Landcruiser HJ45,HJ47 21x1.5 LHT 21x1.5 RHT 17x1.5 LHT 17x1.5 RHT Swivel Hub Kit FJ45,BJ40/42 - SHBKT60
Track Rod End Track Rod End Relay Rod End Relay Rod End Swivel Hub Kit HJ45 - SHBKT60
3/69-7/80 Landcruiser FJ5# SX5402 TE470L TE469R TE471L TE471R TR4531 TR4620 TR9015 4 piece repair kit - TE469/4KIT (TE661K) - B
Relay Rod Track Rod Drag Link Swivel Hub Kit FJ55 - SHBKT60
21x1.5 LHT 21x1.5 RHT 17x1.5 LHT 17x1.5 RHT NLA
60 Series Cruiser - originally came

8/80-90 Landcruiser BJ6# out with short rod & long tie rod TE632L TE631R TE630L TE629L TR4545 TE509K SX6090 4 piece repair kit - TE644/4KIT (TE644) - C
8/80-6/83 Landcruiser FJ6# ends. These were recalled & (TE630R) Relay Rod 11/84-on TE509K - Drag link repair kit 11/84-on
6/83-1/90 Landcruiser FJ6#
replaced with long rod & short tie FJ6# 8/80-6/83 FJ6# 8/80-6/83 Swivel Hub Kit FJ60/62 - SHBKT60
rod ends (the ones we sell). Some
8/80-6/83 Landcruiser HJ6# did not get changed, so there might RHT HJ6# 8/80-6/83 HJ6# 8/80-6/83 Swivel Hub Kit HJ60/61 - SHBKT60
6/83-1/90 Landcruiser HJ6# be occasions where our tie rod Track Rod End Track Rod End Relay Rod End Relay Rod End TR4565 TR4665
ends are advised to be 'too short' - Relay Rod Track Rod
if the short rod is still installed. In FJ6# 6/83-1/90 FJ6# 6/83-1/90
this case we cannot assist with
HJ6# 6/83-1/90 HJ6# 6/83-1/90
ends only, a complete rod
replacement will be necessary or
genuine ends only..
11/84-90 Landcruiser BJ7# TE632L TE631R TE630L TE696L TE509K SX6110 4 piece repair kit - TE695/4KIT (TE695R) - D
11/84-90 Landcruiser FJ7# - not FJ75 (TE630R) TE509K - Drag link repair kit
11/84-90 Landcruiser HJ75 Swivel Hub Kit BJ70/74/78 - SHBKT60
Track Rod End Track Rod End Relay Rod End Relay Rod End Swivel Hub Kit FJ73/75 - SHBKT60

KING PIN LINK
SET
YEAR MODEL
Swivel Hub Kit HJ75 - SHBKT60

Swivel Hub Kit BJ70/73/74 - SHBKT70
Swivel Hub Kit FJ70/73/75 - SHBKT70
11/84-90 Landcruiser RJ70,LJ70,LJ71 TE698 TE631R TE699 TE700 TR4510 TR4690 SX6110 4 piece repair kit - TE697/4KIT (TE697R) - E
(inc. Bundera) (TE698L) (TE699R) (TE700L) Relay Rod Track Rod TE698 - 86mm 23x1.5 LHT BLD 14.76mm
TE700 - 167mm 21x1.5 LHT BLD 14.76mm
LH Thread LH Thread TE700 - tapered mount hole 12-13.5mm
1/90-9/99 Landcruiser FJ75 TE2752 TE997 TE2754 TE2755 TR4560 TR4660 TE509K SX6110 1991-92 4 piece repair kit - TE2750/4KIT (TE2750R)
1/90-9/99 Landcruiser HZJ7# (not including 78), PZJ7# 160mm long 110mm long 134mm long 190mm long Relay Rod Track Rod Front TE509K - Drag link repair kit
1/90-9/99 Landcruiser HJ75, HZJ7#, PZJ7# LHT with hole RH Thread RH Thread LHT with hole (Drag Link) (Toe Adjuster) STB7843 Swivel Hub Kit FJ73/75 - SHBKT60
770mm rod 1070mm rod Rear Swivel Hub Kit FJ70/73/75 - SHBKT70
75 Series Track Rod End Track Rod End Relay Rod End Relay Rod End short long STB7859 Swivel Hub Kit HJ75/HZJ75 - SHBKT70
30mm OD Rod with Swivel Hub Kit PZJ70/73 - SHBKT70
5.7mm wall thickness 1993-95 Recovery Tow Point - RPCRU70
Front
STB7843
1/90-on Landcruiser LJ7#, KZJ7#, RJ79 TE9127 TE997 TE990 TE9097 SX6110 Rear 4 piece repair kit - TE2751/4KIT
(inc. Bundera) STB7580
Track Rod End RH Thread 21x1.5 RHT Relay Rod End
Track Rod End Relay Rod End
1/90-on Landcruiser FJ80, FZJ80, HDJ181, HZJ181 TE995 TE997 TE990 TE989 TR4220 TR4410 see SX6200 1993-95 4 piece repair kit - TE2950/4KIT (TE2950K)
1/90-on Landcruiser HZJ80, HDJ80, HZJ81, HDJ81, HZJ105 Relay Rod Track Rod TR4220 to 1/95 Front Adjustable Panhard Rod front - APR007
1/90-on Landcruiser FZJ105, HZJ105 LH Thread RH Thread 21x1.5 RHT LH Thread (Drag Link) (Toe Adjuster) SX6201 STB7843 Adjustable Panhard Rod rear - APR008
Track Rod End Track Rod End Relay Rod End Relay Rod End 880mm rod 1160mm rod 2/95-on Rear Front Sway Bar Extension 80/100 - STBEXT001
80 Series STB7580 Rear Sway Bar Extension 80/100 - STBEXT002
Rear Sway Bar Extension 105 - STBEXT005
1996-07 Rear Lower Trailing Arm +11mm - LCRTA11B
Front Rear Lower Trailing Arm Rubber Bush - S0508R
STB7843 Rear Upper Trailing Arm Rubber Bush - S0509R
Rear Swivel Hub Kit HDJ80,HZJ80 - SHBKT80
STB7859 Swivel Hub Kit FJ80, FZJ80 - SHBKT80
Swivel Hub Kit H/FZJ105 (non IFS) - SHBKT80
8/99-2011 Landcruiser FZJ71, FZJ74, FZJ78, FZJ79 TE997 TE995 TE2754 TE2755 TR4610 TR4530 TE442K TE442K - Drag Link Repair Kit
8/99-2011 Landcruiser HZJ71, HZJ78, HZJ79 Relay Rod Track Rod 4 piece repair kit - TE2752/4KIT (TE2952XK)
8/99-2011 Landcruiser HDJ7# RH Thread LH Thread RH Thread LH Thread (Drag Link) (Toe Adjuster) Swivel Hub Kit FZJ70/75 - SHBKT70
Track Rod End Track Rod End Relay Rod End Relay Rod End 840mm rod 1020mm rod Swivel Hub Kit H/FZJ78/79 - SHBKT80
78 & 79 Series (6 Cyl) 70 Series Extended Shackle - SK348EXT
Recovery Tow Point - RPCRU70

KING PIN LINK
SET
YEAR MODEL
8/99-2011 Landcruiser FZJ71, FZJ74, FZJ78, FZJ79 TE997 TE995 TE2754 TE2755 TR4554 TR4563 TE442K TE442K - Drag Link Repair Kit
8/99-2011 Landcruiser HZJ71, HZJ78, HZJ79 Relay Rod Track Rod 4 piece repair kit - TE2752/4KIT (TE2952XK)
8/99-2011 Landcruiser HDJ7# RH Thread LH Thread RH Thread LH Thread (Drag Link) (Toe Adjuster) Swivel Hub Kit FZJ70/75 - SHBKT70
Track Rod End Track Rod End Relay Rod End Relay Rod End 920mm rod 1105mm rod Swivel Hub Kit H/FZJ78/79 - SHBKT80
78 & 79 Series (V8) 70 Series Extended Shackle - SK348EXT
Recovery Tow Point - RPCRU70
1/07-7/09 Landcruiser FZJ7# TE997 TE995 TE2754 TE2755 TR4554 TR4563 TE442K TE442K - Drag Link Repair Kit
1/07-2011 Landcruiser HZJ7#, VDJ7# Relay Rod Track Rod 4 piece repair kit - TE2752/4KIT (TE2952XK)
RH Thread LH Thread RH Thread LH Thread (Drag Link) (Toe Adjuster) Swivel Hub Kit FZJ70/75 - SHBKT70
76 Series (V8) Track Rod End Track Rod End Relay Rod End Relay Rod End 920mm rod 1105mm rod 70 Series Extended Shackle - SK348EXT
1996-on Landcruiser KZJ9#, RZJ9#, VZJ9#, BJ9016 RH-BJ3562R TE3561L TE3561R RE9075 RE9075 - 148mm 18x1.5 (socket) F20x1.5 (tre)
Landcruiser FJ80/81,FZJ180,HZJ81, (BJ3561) LH-BJ3562L Front Sway Bar Extension 80/100 - STBEXT001
HDJ81 Rear Sway Bar Extension 80/100 - STBEXT002
strut front end with coil over suspension press in Rear Lower Trailing Arm +11mm - LCRTA11B
Rear Lower Trailing Arm Rubber Bush - S0508R
Rear Upper Trailing Arm Rubber Bush - S0509R
1998-02 Landcruiser UZJ100,HDJ101 BJ3841 BJ8620 TE3811L TE3811R RE3810 98-04 RE3810 - 215mm 18x1.5 (socket) 20x1.5 (tre)
(BJ3812) (RE6438) Front Front Sway Bar Extension 80/100 - STBEXT001
100 Series STB7856 Rear Sway Bar Extension 80/100 - STBEXT002
98 Rear Rear Lower Trailing Arm +11mm - LCRTA11B
STB7901 Rear Lower Trailing Arm Rubber Bush - S0508R
99-04
2003-on Landcruiser UZJ100,HDJ101 BJ3841 BJ8620 TE3813L TE3813R RE3811 Rear RE3811 - 225mm 27x1.5 (socket) 20x1.5 (tre)
Landcruiser 105 series (BJ3812) STB7857 Front Sway Bar Extension 80/100 - STBEXT001
100 Series Diff Drop Kit (100 series with IFS) - LCRDD
Rear Lower Trailing Arm +11mm - LCRTA11B
Rear Lower Trailing Arm Rubber Bush - S0508R
8/02-on Landcruiser RZJ12# BJ3841 BJ3842 TE3841 TE3841 RE3840 RE3840 - 276mm 22x1.5mm (socket) - 15x1.5 (tre)
120 Series
2007-on Landcruiser UZJ200 TE9145L TE9235R RE6003 RE6003 - 255mm 28x1.5mm (socket) 22x1.5mm (tre)
200 Series
2010-on Landcruiser FJ

KING PIN LINK
SET
YEAR MODEL
PRADO - see Prado
Landcruiser Steering Linkage Illustrations
Landcruiser Tie Rod End Illustrations

KING PIN LINK
SET
YEAR MODEL
LEXUS - see LEXUS
LITEACE - 2WD
11/70-9/79 Liteace KM1# BJ68 BJ69 SX1222 TE663L TE663R RH-TR653R TR2240 Upper arm repair kit - SX1097A
LH-TR653L
10/79-9/81 Liteace KM20, TM20 BJ173 BJ129 SX4262 TE428L TE428L TE564R TE564R TR460 TR2380 SX4262 - 2 bolt mount
10/81-9/82 Liteace KM20, TM20 BJ173 BJ129 SX4262 TE428L TE428L TE838R TE838R TR461 TR2380 SX4262 - 2 bolt mount
TE428L = LH Thread
10/82-8/85 Liteace YM20,YM21,CM20 BJ173 BJ225 SX4261 TE489L TE489L TE838R TE838R TR462 TR2381 SX4261 - 3 bolt mount with ball stud end
9/85-7/88 Liteace KM3#, CM3#, YM30 - manual steer BJ173 BJ225 TE3675R TE3675R RE883 TR675 BJ225 - 4 bolt mount BLD 16.7mm
9/85-7/88 Liteace KM3#, CM3#, YM30 - power steer BJ173 BJ225 TE3675R TE3675R RE878 TR675 BJ225 - 4 bolt mount BLD 16.7mm
8/88-92 Liteace KM3#, CM3#, YM3# - manual steer BJ173 BJ225 TE3722 TE3722 RE2920 BJ225 - 4 bolt mount BLD 16.7mm
(TE992) (TE992) (RE996) TE3722 - Female RHT M15 x 1.5
8/88-92 Liteace KM3#, CM3#, YM3# - power steer BJ173 BJ225 TE3722 TE3722 RE9225 BJ225 - 4 bolt mount BLD 16.7mm
1992-on Liteace YR21, KR42 - manual steer BJ173 BJ225 TE3722 TE3722 RE675 manual steer
(TE992) (TE992) BJ225 - 4 bolt mount BLD 16.7mm
1992-on Liteace YR21, KR42 - power steer BJ173 BJ225 TE3722 TE3722 RE9395 power steer
(TE992) (TE992) (RE395) BJ225 - 4 bolt mount BLD 16.7mm
1999-04 Liteace LM7#, KM7# BJ173 BJ225 TE3722 TE3722 RE9395 power steer
(TE992) (TE992) (RE395) BJ225 - 4 bolt mount BLD 16.7mm
LITEACE - 4WD
9/85-7/88 Liteace CM4#, YM40 4WD & 4WD truck BJ433 TE3688 TE3688 RE9085 TR929
TE1454 TE1454

KING PIN LINK
SET
YEAR MODEL
8/88-92 Liteace CM4#, YM40 4WD & 4WD truck BJ433 TE5046 TE5046 RE9235
1999-04 Liteace CM75, KM75, CM8#, KM8# TE9115L TE9355R TE9755
LITEACE - Truck
11/82-9/86 Liteace KM2#, YM2#, CM2#, TM20 - truck BJ173 BJ225 TE189L TE189L TE838R TE838R TR462 TR2381 BJ225 - 4 bolt mount BLD 16.7mm
10/86-6/88 Liteace KM5#, YM55, CM5# - truck - manual steer BJ173 BJ225 TE3675R TE3675R RE883 BJ225 - 4 bolt mount BLD 16.7mm
manual TE3675R - 228mm c/e 14x1.5 Female BLD 13.05mm
10/86-6/88 Liteace KM5#, YM55, CM5# - truck - power steer BJ173 BJ225 TE3675R TE3675R RE878 BJ225 - 4 bolt mount BLD 16.7mm
power TE3675R - 228mm c/e 14x1.5 Female BLD 13.05mm
7/88-on Liteace KM5#, YM55, CM5# - truck - manual steer BJ173 BJ225 TE3722 TE3722 RE2920 BJ225 - 4 bolt mount BLD 16.7mm
manual RE2920 - 323mm 14x1.5 (socket) 14x1.5 (tre)
7/88-on Liteace KM5#, YM55, CM5# - truck - power steer BJ173 BJ225 TE3722 TE3722 RE9225 BJ225 - 4 bolt mount BLD 16.7mm
(TE992) (TE992) power TE3722 - Female RHT M15 x 1.5
PRADO
4/96-1/03 Prado - 95 series BJ9016 RH-BJ3562R TE3561L TE3561R RE9075 Front RE9075 - 148mm 18x1.5 (socket) F20x1.5 (tre)
strut front end with coil over suspension LH-BJ3562L 148mm female STB8129
18x1.5 Rear
95 Series STB8126
2/03-on Prado RZJ12# - 120 series BJ3841 BJ3842 TE3841 TE3841 RE3840 RE3840 - 276mm 22x1.5mm (socket) 15x1.5 (tre)
VZJ12#, KDJ12#, TRJ12# Female RHT Female RHT Recovery Tow Point - RPPRA120
M15x1.5 M15x1.5 278mm male
120 Series 22x1.5
09-on Prado GRJ150, TRJ150 - 150 series BJ4340 TE4540 TE4540 RE4550 RE4550 - 275mm 23x1.5 (socket) 16x1.5 (tre)
Recovery Tow Point - RPPRA150
150 Series
bj3841 te3562l te3841

bj3562l

KING PIN LINK
SET
YEAR MODEL
RAV 4
1994-00 Rav 4 BJ365 TE648 TE648 RE2961 1995-00 RE2961 - 335mm 14x1.5 (socket) 14x1.5 (tre)
(SXA10) (BJ9025) (TE9305) (TE9305) (RE9365) 2WD
ball joint only 14x1.5 stud Front
334mm long STB8006 STB8006 - 10mm studs / 60mm c/c
4WD
STB8018 STB8018 - 12mm studs / 60mm c/c
7/00-10/05 Rav 4 (ACA2#, CLA2#, ZCA2#) BJ550 TE876 TE875 RE9055 Front RE9055 - 315mm 14x1.5 (socket) 15x1.5 (tre)
(BJ9115) (TE9095L) (TE9095R) STB8837
2/06-on Rav 4 (ACA3#) RE6664 RE6664 - 259mm 16x1.5 (socket) 16x1.5 (tre)
electric Rear Toe Adjuster - TE5505
SPACIA
1988-96 Spacia BJ173 BJ225 RE2920 BJ225 - 4 bolt mount BLD 16.7mm
(RE996) RE2920 - 323mm 14x1.5 (socket) 14x1.5 (tre)
STOUT
1965-72 Stout RK43 with Coil Front Suspension BJ67 BJ67 - 14mm ball bolt thread - use '555' brand only
Bolt In
1965-72 Stout RK40,RK41,RK43,RK45,RK27 KX245 TE180L TE180L King pin set - 0.825" x 5.000"
9/67-72 Stout RK101,RK110,RK111 KX245 TE180L TE180L TE442K King pin set - 0.825" x 5.000"
repair kit TE442K - Drag link repair kit
3/72-8/73 Stout RK101,RK110,RK111 KX245 TE484L TE484R TE442K King pin set - 0.825" x 5.000"
(151mm) (151mm) repair kit TE442K - Drag link repair kit
Male LHT Male RHT
M17 x 1.5 M17 x 1.5
9/73-2/79 Stout RK101,RK110,RK111 KX245 TE6271L TE6271R TE442K King pin set - 0.825" x 5.000"
(TE627L) (TE627R) repair kit Note - old number TE627R now used to suit
Honda - please ensure order is accompanied
by specific vehicle application
3/79-86 Stout RK110, YK110, PY20, LY KX426 TE6271L TE6271R TE442K King pin set - 25mm x 153.5mm
(TE627L) (TE627R) repair kit Note - old number TE627R now used to suit
Honda - please ensure order is accompanied
by specific vehicle application

KING PIN LINK
SET
YEAR MODEL
TACOMA
1995-02 Tacoma 2WD RH-BJ4339R RH-BJ4333R TE3541 TE3541 RE3908 Front
LH-BJ4339L LH-BJ4333L m/steer STB8015
RE3541
p/steer
1995-00 Tacoma 4WD BJ3561 RH-BJ1356R TE1356L TE1356R RE3561

press in LH-BJ1356L
2001-02 Tacoma 4WD BJ3561 RH-BJ1366R TE1356L TE1356R RE3561

press in LH-BJ1366L
TARAGO
10/76-10/82 Tarago KR1#, TR1# BJ2281 BJ2282 SX2280 TE489L TE489L TE564R TE564R SX5280
11/82-7/85 Tarago YR2#, CR2# BJ173 BJ225 SX1164 TE489L TE489L TE639R TE639R BJ225 - 4 bolt mount BLD 16.7mm
LH Thread LH Thread
9/85-7/88 Tarago YR2#, CR2# 2WD - manual steer BJ173 BJ225 TE3675R TE3675R RE883 BJ225 - 4 bolt mount BLD 16.7mm
9/85-7/88 Tarago YR2#, CR2# 2WD - power steer BJ173 BJ225 TE3675R TE3675R RE878 BJ225 - 4 bolt mount BLD 16.7mm
8/88-00 Tarago YR2#, CR2# 2WD - manual steer BJ173 BJ225 TE3722 TE3722 RE2920 BJ225 - 4 bolt mount BLD 16.7mm
8/88-00 Tarago YR2#, CR2# 2WD - power steer BJ173 BJ225 TE3722 TE3722 RE9225 BJ225 - 4 bolt mount BLD 16.7mm
1986-9/90 Tarago YR31 2WD BJ7155 TE3723 TE3723 RE997

KING PIN LINK
SET
YEAR MODEL
(TE993) (TE993) (RE2921)
1986-9/90 Tarago YR31 4WD TE3688 TE3688 RE997
8/85-on Tarago TR3#, CR3# 4WD BJ433 RE9085
8/88-on Tarago TR3#, CR3# 4WD BJ433 TE5046 TE5046 RE9235
5/90-6/00 Tarago TCR10 BJ333 TE3521L TE3521R RE3520 Front BJ333 - 2 bolt mount 89.69mm c/c b/w holes
TCR11, TCR20, TCR21 (BJ838) (TE1002) (TE1003) p/steer RH-STB8122 BJ333 - BLD 16.97mm
(RE29295) LH-STB8123 RE3520 - 232mm 14x1.5 (socket) 14x1.5 (tre)
6/00-5/03 Tarago ACR30 RH-BJ3752R RE6443 RE6443 - 255mm

LH-BJ3752L
6/03-12/05 Tarago ACR30 RH-BJ3752R RE6676 RE6676 - 235mm 14x1.5 (socket) 16x1.5 (tre)
LH-BJ3752L p/steer
TOWNACE
1992-on Townace YR39 - manual steer BJ173 BJ225 TE3722 TE3722 RE675 manual steer
1992-on Townace YR39 - power steer BJ173 BJ225 TE3722 TE3722 RE395 power steer
TOWNACE - Truck
8/78-82 Townace RR1#, RR2# - truck BJ2281 BJ2282 TE489L TE489L TE564R TE564R TE489L - LH Thread
TE564R - RH Thread
11/82-9/86 Townace KM2#, YM2#, CM2#, TM20 - truck BJ173 BJ225 TE189L TE189L TE838R TE838R TR462 TR2381 BJ225 - 4 bolt mount BLD 16.7mm
10/86-6/88 Townace KM5#, YM55, CM5# - truck - manual steer BJ173 BJ225 TE3675R TE3675R RE883 BJ225 - 4 bolt mount BLD 16.7mm
10/86-6/88 Townace KM5#, YM55, CM5# - truck - power steer BJ173 BJ225 TE3675R TE3675R RE878 BJ225 - 4 bolt mount BLD 16.7mm
7/88-on Townace KM5#, YM55, CM5# - truck - manual steer BJ173 BJ225 TE3722 TE3722 RE2920 BJ225 - 4 bolt mount BLD 16.7mm

KING PIN LINK
SET
YEAR MODEL
7/88-on Townace KM5#, YM55, CM5# - truck - power steer BJ173 BJ225 TE3722 TE3722 RE9225 BJ225 - 4 bolt mount BLD 16.7mm
TOYO ACE
67-9/71 Toyoace PK32,PK41,PK42 1-1.5ton KX245 TE180L TE180L King pin set - 0.825" x 5.000"
9/71-73 Toyoace PY,RY10,RY12,RY14 KX245 TE484L TE484R King pin set - 0.825" x 5.000"
1974-85 Toyoace RY16,RY31,LY30,LY31 KX247 TE598L TE597R King pin set - 0.825" x 5.000"
TE598L - 100mm 21x1.5 BLD 16.42mm
TRIUMPH
1975-81 TR7 BJ718 TE1556 TE1556
1964-78 2000 Mk I,II 2.5 PI, 2500 TC - manual steer BJ112 TE429R TE429R manual steer
1964-78 2000 Mk I,II 2.5 PI, 2500 TC - power steer BJ112 TE527R TE527R power steer
1971-78 Stag - all models - manual steer BJ112 TE429R TE429R manual steer
1971-78 Stag - all models - power steer BJ112 TE527R TE527R power steer
1971-81 Dolomite, Sprint BJ659 TE1572 TE1572
VALIANT - see CHRYSLER
VAUXHALL
1955-58 Wyvern, Velox BJ24 TE125L TE125R TE125R TE125L
1963-75 Viva HA,HB,HC BJ42 BJ57 TE179R TE179R
1967-72 Victor 1600,2000,FD series BJ42 BJ57 TE179R TE179R
VOLKSWAGEN
BEETLE
1947-4/68 Type I - 1200,1300,1500,1600 KX161 TE132R TE132L TE133L TE133R King pin set - 0.709" x 3.980"

KING PIN LINK
SET
YEAR MODEL
Note: when fitting KX161 the RH Thread LH Thread LH Thread RH Thread Linkpin bush kit - SX051A
Link Pins must be removed. Angled
For replacement Link Pin 10.7 BLD TE133L - with steering damper hole &
Bush Kit - use SX051A 10.7mm top of taper diameter
5/68-77 Type I - 1200,1300,1500,1600 BJ131 BJ132 TE495R TE497L TE496L TE496R TE496R - 12.7mm top of taper diameter
RH Thread LH Thread LH Thread RH Thread TE496L - with steering damper hole &
Angled 12.7mm top of taper diameter
12.7 BLD
TIE ROD END SELECTION
1970-73 Beetle 1600L,1600S,Super Bug BJ133 TE495R TE495R TE497L TE497L Inner & Outer Tie Rod End Selection: NOTE - there
RH Thread RH Thread LH Thread LH Thread is a threaded connecting tube for inner & outer tie
rod ends - if this is reversed the tie rod end threads
1973-on Beetle 1600L,1600S,Super Bug BJ134 TE495R TE495R TE497L TE497L will appear to be incorrect. Please ensure the
RH Thread RH Thread LH Thread LH Thread connecting tubes are in the correct orientation
prior to selecting tie rod ends.
1998-on New Beetle RH-BJ7366R TE2282R TE2281R RE6796 RE6796 - 337mm 16x1.5 (socket) 14x1.5 (tre)
LH-BJ7366L RHT M14x1.5
BORA
1999-on Bora RH-BJ7366R TE2282R TE2281R RE6796 RE6796 - 337mm 16x1.5 (socket) 14x1.5 (tre)
LH-BJ7366L RHT M14x1.5
KOMBI - see VOLKSWAGON Commercial
TYPE 3
1962-64 Type III - Karmann Ghia, 1500, 1500S TE132L TE132R
to chassis# 273513 LH Thread RH Thread
1964-68 Type III - Karmann Ghia, 1500, 1600 BJ44 BJ45 TE132L TE132L TE132R TE132R
from chassis# 273514-on LH Thread LH Thread RH Thread RH Thread
BLD 11mm BLD 11mm BLD 11mm BLD 11mm
1968-74 Type III - Karmann Ghia, 1600 BJ44 BJ45 TE495L TE495L TE495R TE495R
BLD 12.5mm BLD 12.5mm BLD 12.5mm BLD 12.5mm
GOLF
76-10/77 Golf LS hatchback BJ2217 TE1785 TE1785
15mm stud (TE3629R) (TE3629R)
11/77-80 Golf LS, GLS hatchback BJ2022 TE1785 TE1785 BJ2022 - 3 bolt mount spigot style 17mm
17mm stud (TE3629R) (TE3629R)

KING PIN LINK
SET
YEAR MODEL
1998-on Golf - Series IV RH-BJ8303 TE9303R TE8303R RE7127

VR6 LH-BJ9303 (RE3072)
3/94-5/04 Golf - TRW Rack RE6745 RE6745 - 391mm 14x1.5 (socket) 14x1.5 (tre)
3/94-5/04 Golf - ZF Rack RE6796 RE6796 - 337mm 16x1.5 (socket) 14x1.5 (tre)
PASSAT
5/73-8/77 Passat BJ706 BJ706 - spigot style 2 bolt mount
15mm spigot BJ706 - 2mm smaller spigot than BJ814
9/77-82 Passat GLS,LS,GLD to Chassis No. 32B080000 BJ814 BJ814 - spigot style 2 bolt mount
(BJ2023) BJ814 - 2mm larger spigot than BJ706
17mm spigot
82-84 Passat from Chassis No. 32B080001 BJ814 TE1835 TE1835

(BJ2023)
17mm spigot
1985-on Passat Synchro (with Steering Damper) BJ8201 BJ8201 - 17mm not for Variant Engine 1.8-90kw
1988-93 Passat (except VR6) BJ4012 TE9303R TE9812R RE6215 - manual steer to ch# 31NO80000
RE6216 - power steer to ch# 31NO80000
RE6224 - power steer from ch# 31NO80001 - on
1994-on Passat (except 16V - VR6) - to Chassis No. 3AR099264 BJ4012 TE9303R TE9812R RE6216
1994-on Passat (except 16V - VR6) - from Chassis No. 3AR099265 BJ4012 TE2281 TE2282 RE6164
1997-on Passat TE4198R TE4198R RE4228 Front

STB1317
Rear
STB5465
POLO
10/94-9/99 Polo - manual steer RH-BJ8028 TE2908R TE2808R RE6285
LH-BJ9028

KING PIN LINK
SET
YEAR MODEL
10/94-9/99 Polo - power steer RH-BJ8028 TE2908R TE2808R RE6286 Front

LH-BJ9028 STB3060
VENTO
4/95-12/96 Vento RE6745 RE6745 - 391mm 14x1.5 (socket) 14x1.5 (tre)
VOLKSWAGEN - Commercial
Kombi
1955-67 Kombi Van TE132L TE132R Centre pin bush kit - OEM9817A
BLD 11mm BLD 11mm
1967-80 Kombi Van - Torsion Bar Suspension BJ147 BJ147 TE495L TE495R Centre pin bush kit - OEM9817A
BLD 12.5mm BLD 12.5mm
1981-93 Kombi Van - Coil Spring Suspension BJ7361 BJ7187 TE495L TE495R Centre pin bush kit - OEM9817A
press in 3 bolt mount BLD 12.5mm BLD 12.5mm
Transporter
1955-67 Transporter Bus TE132L TE132R Centre pin bush kit - OEM9817A
BLD 11mm BLD 11mm
8/67-5/79 Transporter Type 2 BJ147 BJ147 TE495L TE495L TE495R TE495R Centre pin bush kit - OEM9817A
BLD 12.5mm BLD 12.5mm BLD 12.5mm BLD 12.5mm
5/79-7/92 Transporter Type 2 BJ980 BJ7187

18mm 20mm
Early Transporter - ZF Rack No. 7832-955-122 p/steer RE6666 RE6666 - 401mm 14x1.5 (socket) 14x1.5 (tre)
Transporter T3 - ZF Rack No. 7820-955-108 m/steer
9/90-7/91 Transporter T4 Ch.70M.000001-70M.096448 BJ4187 BJ4361 TE4982L TE4982R

20.5mm 18mm 16 x 1.5 16 x 1.5
8/91-7/94 Transporter T4 Ch.70M.096449-70S.002791 BJ4187 BJ4361 TE4983L TE4983R RE7128 RE7128 - 310mm 14x1.5 (socket) 16x1.5 (tre)
20.5mm 18mm 16 x 1.5 16 x 1.5 11/92-on
8/94-12/95 Transporter T4 Ch.70S.002792-70T.199999 BJ4187 BJ4361 TE4984L TE4984R RE7128 RE7128 - 310mm 14x1.5 (socket) 16x1.5 (tre)
20.5mm 18mm 16 x 1.5 16 x 1.5 11/92-on
1/96-on Transporter T4 Ch. 70T.200001- on BJ4187 BJ4761 TE4985L TE4985R RE7128 RE7128 - 310mm 14x1.5 (socket) 16x1.5 (tre)
20.5mm 2 bolt 16 x 1.5 16 x 1.5 11/92-on
VOLVO
140/160 series

KING PIN LINK
SET
YEAR MODEL
1966-2/69 140,160 series - all models BJ135 BJ136 TE498R TE498R TE498L TE498L BJ136 - body diameter 50mm
3/69-75 140,160 series - all models BJ137 BJ136 TE498R TE498R TE498L TE498L BJ136 - body diameter 50mm
240/260 series
1974-78 240,260 series - manual steer BJ171 TE553R TE553R RE500 RE500 - 285mm F14x1.5 (socket) 14x2 (tre)
3 bolt mount Female 14x2 Female 14x2
1974-78 240,260 series - power steer BJ171 TE553R TE553R RE666 RE666 - 288mm F18x1.5 (socket) 14x2 (tre)
3 bolt mount Female 14x2 Female 14x2
1979-90 240,260 series - all models RH-BJ2025 TE553R TE553R RE501 - power steer up to '89 BJ2025/BJ2026 - offset bolt mounts - if
LH-BJ2026 Female 14x2 Female 14x2 RE502 - 1978-81 Cams Gear Rack straight bolt mounts required - use BJ171
power steer RE504 - power steer '89-on
360 series
3/84-12/87 360 GLT - manual steer BJ789 TE2229 TE2229 RE7131
8/76 to 12/84 8/76 to 12/84 (RE3277)
or or
TE2228 TE2228
1/85 to 7/91 1/85 to 7/91
740/760 series
1983-88 740,760 series - all models BJ1143 TE553R TE553R RE5531 Front RE5531 - 18mm Rack End Thread
Famale 14x2 Famale 14x2 Station Wagon > CH# 176799 STB7956
Hatchback > CH# 294099 Rear
STB8093
1989-on 740,760 series - all models BJ1143 TE553R TE553R RE5539 Front RE5539 - 14mm Rack End Thread
Famale 14x2 Famale 14x2 Station Wagon CH# 176800 > STB7956
Hatchback CH# 294100 > Rear
STB8093
850 series
10/92-3/97 850 series RE7132 Front RE7132 - 190mm 14x1.5 (socket) 14x2 (tre)
STB8092
C70
10/97-on C70 series RE6663 RE6663 - 200mm 16x1.5 (socket) 14x2 (tre)
some - check prior to ordering
S40

KING PIN LINK
SET
YEAR MODEL
3/97-on S40 series RE7133
S70
3/97-on S70 series RE6663 3/97-12/00 RE6663 - 200mm 16x1.5 (socket) 14x2 (tre)
some - check prior to ordering with Turbo
Front
STB8092
3/97-12/05
Front
STB7960
Rear
STB7961
S80
5/98-7/05 S80 series RE6659 Front RE6659 - 145mm 16x1.5 (socket) 14x1.5 (tre)
some - check prior to ordering STB7960
Rear
STB7961
5/98-7/05 S80 series RE6660 Front RE6660 - 155mm 16x1.5 (socket) 14x2 (tre)
some - check prior to ordering STB7960
Rear
STB7961
V40
3/97-on V40 series RE7133
V70
2/97-on V70 series RE6659 RE6659 - 145mm 16x1.5 (socket) 14x1.5 (tre)
2/97-on V70 series RE6660 RE6660 - 155mm 16x1.5 (socket) 14x2 (tre)
VOLVO - Commercial
F Series Cab Over
all all TE1698L TE1698R TE1698 - 30x1.5 male 125mm long BLD 24.00
LH Thread RH Thread TE1699 - 30x1.5 male 125mm long BLD 28.00

KING PIN LINK
SET
YEAR MODEL
N Series Long Nose

all all TE1698L TE1698R TE1698 - 30x1.5 male 125mm long BLD 24.00
LH Thread RH Thread TE1699 - 30x1.5 male 125mm long BLD 28.00
WHITE TRUCKS
ROAD BOSS & COMMANDER
1970-86 Road Boss 2,Road Commander 2,Western 300-235 310-222 310-223 King pin set with metal bushes
Star Conventional 4842 - also with Rockwell single way 1.811" X 10.53"
front axles FF920 & FF931 king pin
RB2-42T,RB62-T,4842,4864,4942,4964,
RC2-42T,RC2-64T,RB2-64T,RBW-42T, RCW-42T,
RBW-64T with F6W-1200 12000lb axle &
1970-86 RB2-42T,RB62-T,4842,4864,4942,4964, 300-232 310-222 310-223 Twin keyway king pin set with
RC2-42T,RC2-64T,RB2-64T,RBW-42T, RCW-42T, metal bushes - 1.793" x 10.39"
RBW-64T with FF933 12000lb axle
1970-86 RB2-42T,RB62-T,4842,4864,4942,4964, 300-216 310-283 310-284 Twin keyway king pin set with
RC2-42T,RC2-64T,RB2-64T,RBW-42T, RCW-42T, metal bushes - 1.999" x 11.21"
RBW-64T with other axle
F120, F3-120, F3W-120, F5-120, F5W-120, F6W-120, 300-142 King pin set - 1.812" x 10.75"
12,000 lb axles abd F5-140, F5W-140 with 14,000lb axle
WOLSELEY
1958-60 1500 TE126R TE126R
1961-70 Hornet Mk I,II,III BJ29 BJ29 TE179R TE179R BJ29 - Ball joint repair kit
1962-67 24-80 Mk I,II KX65 TE126R - Outer R/L

NLA TE126L - Inner R/L
1965-72 1100 Mk I,II, 1300 Mk I,II BJ37 BJ38 TE179R TE179R Front & Rear knuckle joint - BJ82
repair kit repair kit BJ37/38 - Ball joint repair kits
1967-72 18-85 BJ78 BJ78 TE125R TE125R Front & Rear knuckle joint - BJ79 NLA
NLA NLA

Road Safe Cat

Uploaded by

Copyright:

Available Formats

Road Safe Cat

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Road Safe Cat

Uploaded by

Copyright:

Available Formats

BALL JOINT BALL JOINT IDLER TIE ROD END TIE ROD END TIE ROD END TIE

KING PIN LINK

2/99-4/06 Alfa 156 RE6643 RE6643 - Built in Damper 220mm Long

2/99-4/06 Alfa 156 RE6639 RE6639 - Built in Damper 235mm Long

14X1.5 14X1.5 RE5079 application. Check if ordered by part no.

14X1.5 14X1.5 RE5079 application. Check if ordered by part no.

Section 2 : Page 1 of 208

KING PIN LINK

1984-87 Alfetta,GTV,Guiletta BJ843 BJ844 TE1783 TE1783 RE879

1958-61 Classic, Rebel 58/5920,6020,6120 8cyl SX77 TE423L TE423L

Section 2 : Page 2 of 208

KING PIN LINK

1978-81 1.3, 1.5, 1.6L BJ814 TE1717 TE1717

1986-87 1.8lt - to chassis# 81B095000 RH-BJ987 TE1717 TE1717 Front

1988-91 Quattro 1.8lt - to chassis# 89J351000 RH-BJ987 TE1835 TE1835 Front

1993-on Quattro 2.6lt TE1835 TE1835 Front

Section 2 : Page 3 of 208

KING PIN LINK

1983-on 2.1, 2.2, 2.3, 2.6, 2.8L TE2065 TE2066

AUSTIN - see LEYLAND

Section 2 : Page 4 of 208

KING PIN LINK

1957-72 C4,C5,C6 (Petrol) 4-6ton, D5,D6L 5-6ton TE110L TE110R

Section 2 : Page 5 of 208

KING PIN LINK

HANDIVAN & BEAGLE

10/68-9/73 E3 - 2500/2800/3.0 TE1786 TE1786 TE1787 TE1787

9/72-5/81 E12 - 5 series RH-BJ4222 TE1786 TE1786 TE1788 TE1788 TR148

Section 2 : Page 6 of 208

KING PIN LINK

2/76-5/82 E24 - 6 series TE1786 TE1786 TE1788 TE1788 TR148

Section 2 : Page 7 of 208

KING PIN LINK

Torque Rods only

1989-on E31 - 8 series TE2234 TE2234 TE2233 TE2233 TR4338 Front

1/01-on E66 - 7 series TE6369 TE6369 RE6368 Front

Section 2 : Page 8 of 208

KING PIN LINK

suit rack 7852-974-878 LH - STB7835

2003-on Z4 Track Control Arms TE5957 TE5958 RE6897 Front

1942-49 Series 40, 50 TE52L TE52L

1949-50 Series 40, 50 TE52R TE52R

1938-52 Series 60, 70 TE175L TE175L

1953-56 Series 40, 50, 60, 70 TE52R TE52R

1941-52 Series 90 TE175L TE175L

Section 2 : Page 9 of 208

KING PIN LINK

1973-74 Appollo, Skylark (RWD) BJ54 BJ55 or 18718 ES381R ES381R

1971-76 Riviera BJ487 10267 ES403R ES403R ES403L ES403L

1977-78 Riviera BJ487 BJ488 TE2019R TE2019R TE2020L TE2020L

1970-76 Deville, Fleetwood Brougham RH-10211N 10286 18747

Section 2 : Page 10 of 208

KING PIN LINK

1986-96 Fleetwood Brougham (RWD) BJ487 10267 18799

BEL AIR, IMPALA, etc.

Section 2 : Page 11 of 208

KING PIN LINK

Police Car/Wagon (10268) (K6187) (ES2019R) (ES2019R) (ES2020L) (ES2020L)

1993-96 Camaro & Z28 with 104233 BJ488 ES3238 ES3238

1973-77 Chevelle, El Camino, Malibu, & BJ487 BJ488 ES427R ES427R