SD 6-16-107 Rev 0 Traffic Signal Layout Plan Example
SD 6-16-107 Rev 0 Traffic Signal Layout Plan Example
SD 6-16-107 Rev 0 Traffic Signal Layout Plan Example
A A
KEY PLAN
NOTES:
1. EXACT LOCATION OF TRAFFIC SIGNAL EQUIPMENT TO BE
B B
DETERMINED ON SITE BY THE CONTRACTOR. ALL LOCATIONS
WILL NEED TO BE APPROVED BY THE ROAD SAFETY DIVISION
ALONG WITH THE SUPERVISING ENGINEER.
2. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE
STATED eg 24 METERS.
3. THE TRAFFIC SIGNAL CONTROLLER'S POWER SUPPLY WILL BE
SUPPLIED FROM TWO DIFFERENT SUBSTATIONS.
4. ALL TYPE 1 DUCTS TO BE INSTALLED AT 90 DEGREES TO THE
KERB OR DIRECTION OF VEHICULAR TRAVEL
5. ALL TYPE 1 & TYPE 3 DUCTS RUNS TO CONTAIN AT LEAST TWO
DUCTS (2W). SINGLE DUCT RUNS SHALL ONLY BE PERMITTED
FOR SHORT SECTIONS OF TYPE 2 DUCTS BETWEEN CHAMBERS
AND POLES OTHERWISE TWO TYPE 2 DUCTS SHALL BE PROVIDED.
6. ALL DUCTS SHALL BE INSTALLED WITH A DRAW CORD FOR THE
INSTALLATION OF CABLES.
7. TRAFFIC SIGN AND ROAD MARKING DETAILS ARE CONTAINED ON
C A SEPARATE DRAWING. C
8. NO DUCTS SHALL BE LOCATED UNDER PEDESTRIAN CROSSING
AREAS.
LEGEND:
D D
F F
Project Name:
TRAFFIC SIGNAL
LAYOUT PLANS
G G
Project Code:
Status:
EXAMPLE DRAWING
Drawing Title:
TRAFFIC SIGNAL
LAYOUT PLAN
EXAMPLE
H Drawn:
A.VICENTE
Checked:
A.MICHIELSEN H
Designed: Approved:
C.BANFIELD M.GATE
Date: Scale:
MARCH 2016 1:200 AT A3
Drawing Number: Revision:
SD 6-16-107 0
1 2 3 4 5 6 7 8 9 10 11 12