Advanced search reference - JQL fields

JQL lets you search for a value in a specific field. Each field in Jira has a corresponding
JQL name. If you’ve made a custom field, you’ll be asked to name the field.

In a clause, a field is followed by an operator, which in turn is followed by one or more

values (or functions). The operator compares the value of the field with one or more
values or functions on the right, such that only true results are retrieved by the clause.
It's not possible to compare two fields in JQL.

Affected version
Search for issues that are assigned to a particular affects version(s). You can search by
version name or version ID (i.e. the number that Jira automatically allocates to a
version).Note, it is better to search by version ID than by version name. Different
projects may have versions with the same name. It is also possible for your Jira
administrator to change the name of a version, which could break any saved filters that
rely on that name. Version IDs, however, are unique and cannot be changed.

Syntax
affectedVersion

Field Type VERSION

Auto-complete Yes
= , != , > , >= , < , <=
Supported IS, IS NOT, IN, NOT IN Note that the comparison operators (e.g.
operators ">") use the version order that has been set up by your project
administrator, not a numeric or alphabetic order.
Unsupported ~ , !~
operators WAS, WAS IN, WAS NOT, WAS NOT IN, CHANGED
When used with the = and != operators, this field supports:

 latestReleasedVersion()
 earliestUnreleasedVersion()
Supported
functions When used with the IN and NOT IN operators, this field supports:

 releasedVersions()
 unreleasedVersions()

Examples  Find issues with an AffectedVersion of 3.14:

affectedVersion = "3.14"
Note that full-stops are reserved characters and need to be surrounded by quote-marks.
 Find issues with an AffectedVersion of "Big Ted":
affectedVersion = "Big Ted"
 Find issues with an AffectedVersion ID of 10350:
 affectedVersion = 10350

Approvals
Used in Jira Service Management  only.

Search for requests that have been approved or require approval. This can be further
refined by user.

Syntax
approvals

Field Type USER

Auto-complete No
Supported
=
operators
~ , != , !~ , > , >= , < , <=
Unsupported
IS , IS NOT , IN , NOT IN , WAS, WAS IN, WAS NOT, WAS
operators
NOT IN , CHANGED
 approved()
 approver()
 myApproval()
Supported  myPending()
functions  myPendingApproval()
 pending()
 pendingBy()

 Find requests that require or required approval by John

Smith:
approval = approver(jsmith)
 Find requests that require approval by John Smith:
approval = pendingBy(jsmith)
Examples  Find requests that require or have required approval by the
current user:
approval = myPending()
 Find all requests that require approval:
approval = pending()

Assignee
Search for issues that are assigned to a particular user. You can search by the user's full
name, ID, or email address.

Syntax
assignee

Field Type USER

Auto-complete Yes
= , !=
IS, IS NOT, IN, NOT IN, WAS, WAS IN, WAS NOT, WAS NOT
IN, CHANGED
Supported
operators
Note that the comparison operators (e.g. ">") use the version order
that has been set up by your project administrator, not a numeric or
alphabetic order.
Unsupported
~ , !~ , > , >= , < , <=
operators
When used with the IN and NOT IN operators, this field supports:

 membersOf()
Supported
When used with the EQUALS and NOT EQUALS operators, this
functions
field supports:

 currentUser()

 Find issues that are assigned to John Smith:

assignee = "John Smith"or
assignee = jsmith
 Find issues that are currently assigned, or were previously
assigned, to John Smith:
assignee WAS jsmith
Examples
 Find issues that are assigned by the user with email address
[email protected]:
o assignee = "[email protected]"

Note that full-stops and "@" symbols are reserved characters and need to be surrounded by
quote-marks.

Attachments
Search for issues that have or do not have attachments. 

Syntax
attachments

Field Type ATTACHMENT

Auto-complete Yes
Supported
IS, IS NOT
operators
Unsupported =, != , ~ , !~ , > , >= , < , <= IN, NOT IN, WAS, WAS IN, WAS
operators NOT, WAS NOT IN, CHANGED
 Supported
None
functions
 Search for issues that have attachments:
attachments IS NOT EMPTY  
Examples  Search for issues that do not have attachments:
attachments IS EMPTY 

Category
Search for issues that belong to projects in a particular category.

Syntax
category

Field Type CATEGORY

Auto-complete Yes
=, !=
Supported operators
IS, IS NOT, IN, NOT IN
Unsupported ~ , !~ , > , >= , < , <= WAS, WAS IN, WAS NOT, WAS NOT
operators IN, CHANGED
Supported functions None
 Find issues that belong to projects in the "Alphabet
Projects" Category:
Examples
category = "Alphabet Projects"

Change gating type
Used in Jira Service Management  only.

Search for types of change gating that are used in change requests. "Tracked-only"
requests are produced by integrations that stand separately from a change management
process. These tools don't respect approval or change gating strategies. Change requests
that are "tracked-only" are just for record-keeping purposes.

Syntax
change-gating-type

Field Type TEXT

Auto-complete Yes
= , !=
Supported operators
IS, IS NOT, IN, NOT IN
Unsupported ~ , !~ , > , >= , < , <= WAS, WAS IN, WAS NOT, WAS NOT
operators  IN, CHANGED
Supported functions None
  Find requests where the gating type is empty:
change-gating-type is EMPTY
Examples  Find requests where the gating type is tracked-only:
change-gating-type = "tracked-only"

Comment
Search for issues that have a comment that contains particular text using Jira text-search
syntax. Learn more about searching syntax for text fields.

Syntax
comment

Field Type TEXT

Auto-complete No
Supported operators ~ , !~
= , != , > , >= , < , <=
Unsupported
IS, IS NOT, IN, NOT IN, WAS, WAS IN, WAS NOT, WAS
operators
NOT IN, CHANGED
Supported functions None
 Find issues where a comment contains the words "My PC
is quite old":
Examples
comment ~ "\"My PC is quite old"

Component
Search for issues that belong to a particular component(s) of a project. You can search
by component name or component ID (i.e. the number that Jira automatically allocates
to a component).

Note, it is safer to search by component ID than by component name. Different projects

may have components with the same name, so searching by component name may
return issues from multiple projects. It is also possible for your Jira administrator to
change the name of a component, which could break any saved filters that rely on that
name. Component IDs, however, are unique and cannot be changed.

Syntax
component

Field Type COMPONENT

Auto-complete Yes
Supported = , !=
operators IS , IS NOT , IN , NOT IN
Unsupported ~ , !~ , > , >= , < , <= WAS, WAS IN, WAS NOT, WAS NOT
operators IN, CHANGED
 When used with the IN and NOT IN operators, component
supports:
Supported functions
 componentsLeadByUser()

 Find issues in the "Comp1" or "Comp2" component:

component in (Comp1, Comp2)
 Find issues in the "Comp1" and"Comp2" components:
component in (Comp1) and component in (Comp2)
Examples or
component = Comp1 and component = Comp2 
 Find issues in the component with ID 20500:
component = 20500 

Created
Search for issues that were created on, before, or after a particular date (or date range).
Note that if a time-component is not specified, midnight will be assumed. Please note
that the search results will be relative to your configured time zone (which is by default
the Jira server's time zone).

Use one of the following formats:

"yyyy/MM/dd HH:mm"
"yyyy-MM-dd HH:mm"
"yyyy/MM/dd"
"yyyy-MM-dd"

Or use "w" (weeks), "d" (days), "h" (hours) or "m" (minutes) to specify a date relative to

the current time. The default is "m" (minutes). Be sure to use quote-marks ("); if you
omit the quote-marks, the number you supply will be interpreted as milliseconds after
epoch (1970-1-1).

Syntax
created

Alias
createdDate

Field Type DATE

Auto-complete No
Supported
= , != , > , >= , < , <= IS , IS NOT , IN , NOT IN
operators
Unsupported
~ , !~ WAS, WAS IN, WAS NOT, WAS NOT IN, CHANGED
operators
Supported When used with the EQUALS, NOT EQUALS, GREATER
functions THAN, GREATER THAN EQUALS, LESS THAN or LESS
 THAN EQUALS operators, this field supports:

 currentLogin()
 lastLogin()
 now()
 startOfDay()
 startOfWeek()
 startOfMonth()
 startOfYear()
 endOfDay()
 endOfWeek()
 endOfMonth()
 endOfYear()

 Find all issues created before 12th December 2010:

created < "2010/12/12"
 Find all issues created on or before 12th December 2010:
created <= "2010/12/13"
 Find all issues created on 12th December 2010 before 2:00pm:
created > "2010/12/12" and created < "2010/12/12 14:00" 
Examples  Find issues created less than one day ago:
created > "-1d"
 Find issues created in January 2011:
created > "2011/01/01" and created < "2011/02/01"
 Find issues created on 15 January 2011:created
> "2011/01/15" and created < "2011/01/16"

Creator
Search for issues that were created by a particular user. You can search by the user's full
name, ID, or email address. Note that an issue's creator does not change, so you cannot
search for past creators (e.g. WAS). See Reporter for more options. 

Syntax
creator

Field Type USER

Auto-complete Yes
Supported = , !=
operators IS , IS NOT , IN , NOT IN
Unsupported ~ , !~ , > , >= , < , <= CHANGED, WAS, WAS IN, WAS NOT,
operators WAS NOT IN
Supported When used with the IN and NOT IN operators, this field supports:
functions
 membersOf()

When used with the EQUALS and NOT EQUALS operators, this

 field supports:

 currentUser()

 Search for issues that were created by Jill Jones:

creator = "Jill Jones"
or
creator = "jjones"
 Search for issues that were created by the user with email
Examples address :
creator = "[email protected]"
(Note that full-stops and "@" symbols are
reserved characters, so the email address needs to be
surrounded by quote-marks.) 

Custom field
Only applicable if your Jira administrator has created one or more custom fields.

Search for issues where a particular custom field has a particular value. You can search
by custom field name or custom field ID (i.e. the number that Jira automatically
allocates to an custom field).

Note, it is safer to search by custom field ID than by custom field name. It is possible

for a custom field to have the same name as a built-in Jira system field; in which case,
Jira will search for the system field (not your custom field). It is also possible for your
Jira administrator to change the name of a custom field, which could break any saved
filters that rely on that name. Custom field IDs, however, are unique and cannot be
changed.

Syntax
CustomFieldName

Alias
cf[CustomFieldID]

Depends on the custom field's configuration

Field Type
Jira text-search syntax can be used with custom fields of type
'Text'. Learn more about searching syntax for text fields.
Yes, for custom fields of type picker, group picker, select,
Auto-complete
checkbox and radio button fields
Supported operators Different types of custom field support different operators.
Supported operators:
= , != , > , >= , < , <=
number and date IS , IS NOT , IN , NOT IN
fields 
 Unsupported
operators:
~ , !~ WAS, WAS IN, WAS NOT, WAS NOT IN, CHANGED
number and date
fields
Supported operators:

picker, select, = , !=
checkbox IS , IS NOT , IN , NOT IN
and radio button
fields
Unsupported
operators:
picker, select, ~ , !~ , > , >= , < , <= WAS, WAS IN, WAS NOT, WAS NOT
checkbox IN, CHANGED
and radio button
fields
Supported operators:
~ , !~
IS , IS NOT
text fields 
Unsupported
= , != , > , >= , < , <= IN , NOT IN , WAS, WAS IN, WAS
operators:
NOT, WAS NOT IN, CHANGED
text fields 
Supported operators:
= , !=
IS , IS NOT , IN , NOT IN
URL fields 
Unsupported
~ , !~ , > , >= , < , <= WAS, WAS IN, WAS NOT, WAS NOT
operators:
IN, CHANGED
URL fields
Supported functions Different types of custom fields support different functions.
When used with the EQUALS, NOT EQUALS, GREATER
THAN, GREATER THAN EQUALS, 
LESS THAN or LESS THAN EQUALS operators, this field
supports:

 currentLogin()
 lastLogin()
 now()
Supported functions:
 startOfDay()
date/time fields 
 startOfWeek()
 startOfMonth()
 startOfYear()
 endOfDay()
 endOfWeek()
 endOfMonth()
 endOfYear()

Supported functions:  Version picker fields: When used with the IN and NOT

version picker fields  IN operators, this field supports:
  releasedVersions()
 latestReleasedVersion()
 unreleasedVersions()
 earliestUnreleasedVersion()

 Find issues where the value of the "Location" custom

field is "New York":
location = "New York"
 Find issues where the value of the custom field with ID
10003 is "New York":
cf[10003] = "New York"
Examples  Find issues where the value of the "Location" custom
field is "London" or "Milan" or "Paris":
cf[10003] in ("London", "Milan", "Paris")
 Find issues where the "Location" custom field has no
value:
location != empty

Customer Request Type

Used in Jira Service Management  only.

Search for requests of a certain request type. You can search by request type name or
request type description as configured in the Request Type configuration screen. 

Syntax
"Customer Request Type"

Field Type Custom field

Auto-complete Yes
Supported operators
= , !=

IN , NOT IN
~ , !~ , > , >= , < , <= IS , IS NOT, WAS, WAS IN, WAS NOT, WAS
NOT IN , CHANGED

Unsupported Note that the Lucene value for Customer Request Type,
operators is portal-key/request-type-key. While the portal key cannot be changed
after a service project portal is created, the project key can be changed.
The Request Type key cannot be changed once the Request Type is
created.
Supported
None
functions
Examples  Find issues where Customer Request Type is Request a new
account in projects that the user has access to:
 "Customer Request Type" = "Request a new account"
 Find issues where the Customer Request Type is Request a
new account in SimpleDesk project, where the right operand
is a selected Lucene value from the auto-complete suggestion
list.
"Customer Request Type" = "sd/system-access"
 Find issues where Customer Request Type is either Request a
new account or Get IT Help.
"Customer Request Type" IN ("Request a new account", "Get
IT Help")

Description
Search for issues where the description contains particular text using Jira text-search
syntax. Learn more about searching syntax for text fields.

Syntax
description

Field Type TEXT

Auto-complete No
Supported ~ , !~
operators IS , IS NOT
Unsupported = , != , > , >= , < , <= IN , NOT IN, WAS, WAS IN, WAS NOT,
operators WAS NOT IN , CHANGED
Supported
None
functions
 Find issues where the description contains the words
"Please see screenshot":
Examples
description ~ "Please see screenshot"

Due
Search for issues that were due on, before, or after a particular date (or date range). Note
that the due date relates to the date only (not to the time).

Use one of the following formats:

"yyyy/MM/dd"
"yyyy-MM-dd"

Or use "w" (weeks) or "d" (days) to specify a date relative to the current date. Be sure to

use quote-marks (").

Syntax
due

Alias
dueDate

Field Type DATE

Auto-complete No
Supported = , != , > , >= , < , <=
operators IS , IS NOT , IN , NOT IN
Unsupported
~ , !~ WAS, WAS IN, WAS NOT, WAS NOT IN , CHANGED
operators
When used with the EQUALS, NOT EQUALS, GREATER
THAN, GREATER THAN EQUALS, 
LESS THAN or LESS THAN EQUALS operators, this field
supports:

 currentLogin()
 lastLogin()
 now()
Supported
 startOfDay()
functions
 startOfWeek()
 startOfMonth()
 startOfYear()
 endOfDay()
 endOfWeek()
 endOfMonth()
 endOfYear()

 Find all issues due before 31st December 2010:

due < "2010/12/31"
 Find all issues due on or before 31st December 2010:
due <= "2011/01/01"
 Find all issues due tomorrow:
Examples due = "1d"
 Find all issues due in January 2011:
due >= "2011/01/01" and due <= "2011/01/31"
 Find all issues due on 15 January 2011:
due = "2011/01/15"

Environment
Search for issues where the environment contains particular text using Jira text-search
syntax. Learn more about searching syntax for text fields.

Syntax
environment
 Field Type TEXT
Auto-complete No
Supported ~ , !~
operators IS , IS NOT
Unsupported = , != , > , >= , < , <= IN , NOT IN, WAS, WAS IN, WAS NOT,
operators WAS NOT IN , CHANGED
Supported
None
functions
 Find issues where the environment contains the words
"Third floor":
Examples
environment ~ "Third floor"

Epic link
Search for issues that belong to a particular epic in company-managed projects. The
search is based on either the epic's name, issue key, or issue ID (i.e. the number that Jira
automatically allocates to an issue).

To search for issues that belong to a particular epic in team-managed projects, use
parent.

Syntax
"epic link"

Field Type Epic Link Relationship

Auto-complete No
Supported = , !=
operators IS , IS NOT, IN , NOT IN
Unsupported ~ , !~ , > , >= , < , <= WAS, WAS IN, WAS NOT, WAS NOT
operators IN , CHANGED
When used with the IN or NOT IN operators, epic link supports:

 issueHistory()
Supported
 linkedIssues()
functions
 votedIssues()
 watchedIssues()

 Find issues that belong to epic "Jupiter", where "Jupiter

has the issue key ANERDS-31:
"epic link" = ANERDS-31
Examples
or
"epic link" = Jupiter

Filter
You can use a saved filter to narrow your search. You can search by filter name or filter
ID (i.e. the number that Jira automatically allocates to a saved filter).

Note:

 It is safer to search by filter ID than by filter name. It is possible for a filter name
to be changed, which could break a saved filter that invokes another filter by
name. Filter IDs, however, are unique and cannot be changed.
 An unnamed link statement in your typed query will override an ORDER BY
statement in the saved filter.
 You cannot run or save a filter that would cause an infinite loop (i.e. you cannot
reference a saved filter if it eventually references your current filter).

Syntax
filter

Aliases
request ,
savedFilter ,
searchRequest
Field Type Filter
Auto-complete Yes
= , !=
Supported operators
IN , NOT IN
~ , !~ , > , >= , < , <= IS , IS NOT, WAS, WAS IN, WAS
Unsupported operators
NOT, WAS NOT IN , CHANGED
Supported functions None
 Search the results of the filter "My Saved Filter"
(which has an ID of 12000) for issues assigned to
the user jsmith:
Examples filter = "My Saved Filter" and assignee = jsmith
or
filter = 12000 and assignee = jsmith

Fix version
Search for issues that are assigned to a particular fix version. You can search by version
name or version ID (i.e. the number that Jira automatically allocates to a version).

It’s safer to search by version ID than by version name. Different projects may have
versions with the same name, so searching by version name may return issues from
multiple projects. It is also possible for your Jira administrator to change the name of a
version, which could break any saved filters that rely on that name. Version IDs,
however, are unique and cannot be changed.

Syntax
fixVersion

Field Type VERSION

Auto-complete Yes
= , != , > , >= , < , <=
IS , IS NOT, IN , NOT IN, WAS, WAS IN, WAS NOT, WAS
NOT IN , CHANGED 
Supported
operators Note that the comparison operators (e.g. ">") use the version
order  that has
been set up by your project administrator, not a numeric or
alphabetic order.
Unsupported
~ , !~
operators
When used with the = and != operators, this field supports:

 latestReleasedVersion()
 earliestUnreleasedVersion()
Supported
functions When used with the IN and NOT IN operators, this field supports:

 releasedVersions()
 unreleasedVersions()

 Find issues with a Fix Version of 3.14 or 4.2:

fixVersion in ("3.14", "4.2")
(Note that full-stops are reserved characters, so they need to
be surrounded by quote-marks.)
Examples  Find issues with a Fix Version of "Little Ted":
fixVersion = "Little Ted"
 Find issues with a Fix Version ID of 10001:
fixVersion = 10001

Hierarchy level
This feature is rolling out to customers. You might not see it on your site just yet.

Filter issues according to their hierarchy level using a JQL filter. This field uses
numbers that correlate to hierarchy levels. Use:

 1 to filter by parent level task, such as epics. This level is defined by your Jira
administrator.
 0 to filter by standard level issues, such as stories or tasks
 -1 to filter by subtasks

Currently, this field doesn’t support custom hierarchy levels made in Advanced
Roadmaps.
 Syntax
hierarchyLevel

Field Type Number

Auto-complete Yes
Supported operators
= , != , > , >= , < , <= ,
IN , NOT IN
~ , !~ , IS, IS NOT, WAS, WAS IN, WAS NOT,
Unsupported operators
WAS NOT IN , CHANGED
 None
Supported functions
 Find issues at the story level: hierarchyLevel =
"0"
Examples  Find issues higher than the subtask level:
hierarchyLevel > -1

Issue key
Search for issues with a particular issue key or issue ID (i.e. the number that Jira
automatically allocates to an issue).

Syntax
issueKey

Aliases
id , issue , key

Field Type ISSUE

Auto-complete No
= , != , > , >= , < , <=
Supported operators
IN, NOT IN
Unsupported ~ , !~
operators IS, IS NOT, WAS NOT, WAS NOT IN, CHANGED 
When used with the IN or NOT
IN operators, issueKey supports:

 issueHistory()
Supported functions
 linkedIssues()
 votedIssues()
 watchedIssues()

 Find the issue with key "ABC-123":

Examples issueKey = ABC-123
Issue link
Searches for issues linked or not linked to an issue. You can restrict the search to links
of a particular type.

issueLink, issueLink["link type"], or issueLinkType, where link type

Syntax or LinkType is a variable you replace with the issue link type (blocks,
duplicates, or is blocked by, for example).
Auto-complete Yes
= , !=
Supported
operators
IN , NOT IN
~ , !~ , > , >= , < , <=
Unsupported
operators WAS , WAS IN , WAS NOT , WAS NOT IN , CHANGED , IS , IS
NOT
Supported
None
functions
Find issues:

 with a link of any type to the issue ABC-123: issueLink =

ABC-123
 with linked issues but not linked to a specific issue:
issueLink != ABC-123
 linked to at least one of a list of issues: issueLink in (ABC-
123, ABC-456)
Examples
 with linked issues but not linked to any of the issues you
specify: issueLink not in (ABC-123, ABC-456)
 that block the issue ABC-123 (link type is "blocks"):
issueBlocks = ABC-123 or issueLink["blocks"] = ABC-123
 that are blocked by the issue ABC-123 (link type is "is
blocked by"): issueIsBlockedBy = ABC-123 or issueLink["is
blocked by"] = ABC-123

Issue link type

Search for issues that have a particular link type, like blocks or is duplicated by. You
can only find issues from the Jira instance you're searching on; remote links to issues on
other Jira instances won’t be included.

Use this JQL query to add colors to your issue cards! For example, add a red stripe to
issues that have some blockers, and keep all other issues green. This will help you bring
the right information to your team’s attention, at a glance. For more info, see
Customizing cards.

Syntax
issueLinkType

Auto-complete Yes
Supported = , !=
operators IN , NOT IN
~ , !~ , > , >= , < , <=
Unsupported
operators WAS , WAS IN , WAS NOT , WAS NOT IN , CHANGED , IS ,
IS NOT
Supported functions None
Find issues:

 with a link type of "causes": issueLinkType = causes

 with a link type of "duplicates" or "clones":
issueLinkType in (duplicates,clones)
 with link types other than “clones”: issueLinkType !=
Examples
clones
 that are blocked by other issues, or that don't have any
blockers:
o issueLinkType = "is blocked by"
o issueLinkType != "is blocked by"

Jira issue link types have the following properties:

 Name: The title for the link type

 Outward description: The description of how an issue affects other issues
 Inward description: The description of how an issue is affected by other issues

For example, a link type could have the following properties:

 Name: Problem/Incident
 Outward description: causes
 Inward description: is caused by

When searching issueLinkType, Jira searches all three properties. This can mean you're
unable to isolate issues with a specific inward or outward description if the link type's
name and either of the descriptions are the same. This is the case for the default
"Blocks" link type, where the name and outward description are "blocks".

If you need to be able to search specifically for issues with an outward description of
"blocks", for example, a Jira administrator must change the name of the link type to
something else. If you're a Jira admin, take a look at Configuring issue linking for more
info.

Labels
Search for issues tagged with a label or list of labels. You can also search for issues
without any labels to easily identify which issues need to be tagged so they show up in
the relevant sprints, queues or reports. 

Syntax
labels

Field Type LABEL

Auto-complete Yes
= , !=, IS, IS NOT, IN, NOT IN
Supported
operators We recommend using IS or IS NOT to search for a single label,
and IN or NOT IN to search for a list of labels.
Unsupported ~ , !~ , , > , >= , < , <=
operators WAS, WAS IN, WAS NOT, WAS NOT IN, CHANGED
Supported
None
functions
 Find issues with an existing label:
labels = "x"
 Find issues without a specified label, including issues
Examples
without a label:
labels not in ("x") or labels is EMPTY

Last viewed
Search for issues that were last viewed on, before, or after a particular date (or date
range). Note that if a time-component is not specified, midnight will be assumed. Please
note that the search results will be relative to your configured time zone (which is by
default the Jira server's time zone).

Use one of the following formats:

"yyyy/MM/dd HH:mm"
"yyyy-MM-dd HH:mm"
"yyyy/MM/dd"
"yyyy-MM-dd"

Or use "w" (weeks), "d" (days), "h" (hours) or "m" (minutes) to specify a date relative to

the current time. The default is "m" (minutes). Be sure to use quote-marks ("); if you
omit the quote-marks, the number you supply will be interpreted as milliseconds after
epoch (1970-1-1).

Syntax
lastViewed

Field Type DATE

Auto-complete No
 Supported = , != , > , >= , < , <=
operators IS , IS NOT, IN , NOT IN
Unsupported ~ , !~
operators WAS, WAS IN, WAS NOT, WAS NOT IN , CHANGED 
When used with the EQUALS, NOT EQUALS, GREATER
THAN, GREATER THAN EQUALS, LESS THAN or LESS
THAN EQUALS operators, this field supports:

 currentLogin()
 lastLogin()
 now()
Supported  startOfDay()
functions  startOfWeek()
 startOfMonth()
 startOfYear()
 endOfDay()
 endOfWeek()
 endOfMonth()
 endOfYear()

 Find all issues last viewed before 12th December 2010:

lastViewed < "2010/12/12"
 Find all issues last viewed on or before 12th December 2010:
lastViewed <= "2010/12/13"
 Find all issues last viewed on 12th December 2010 before
2:00pm:
lastViewed > "2010/12/12" and created < "2010/12/12 14:00"
Examples
 Find issues last viewed less than one day ago:
lastViewed > "-1d"
 Find issues last viewed in January 2011:
lastViewed > "2011/01/01" and created < "2011/02/01"
 Find issues last viewed on 15 January 2011:
lastViewed > "2011/01/15" and created < "2011/01/16"

Level
Only available if issue level security has been enabled by your Jira administrator.

Search for issues with a particular security level. You can search by issue level
security name or issue level security ID (i.e. the number that Jira automatically allocates
to an issue level security).

Note, it is safer to search by security level ID than by security level name. It is possible
for your Jira administrator to change the name of a security level, which could break
any saved filter that rely on that name. Security level IDs, however, are unique and
cannot be changed.
 Syntax
level

Field Type SECURITY LEVEL

Auto-complete Yes
= , !=
Supported operators
IS , IS NOT, IN , NOT IN
Unsupported > , >= , < , <= , ~ , !~
operators WAS, WAS IN, WAS NOT, WAS NOT IN , CHANGED 
Supported functions None
 Search for issues with a security level of "Really High"
or "level1":
level in ("Really High", level1)
Examples
 Search for issues with a security level ID of 123:
level = 123

Organization
Used in Jira Service Management  only.

Search for all requests shared with an organization. Requests that were kept private
won't be returned.

Syntax
organizations

Field Type USER

Auto-complete Yes
= , !=
Supported operators
IN, NOT IN
Examples Search for all requests shared with the organization Atlassian:
organizations = "Atlassian"

Original estimate
Only available if time-tracking has been enabled by your Jira administrator.

Search for issues where the original estimate is set to a particular value (i.e. a number,
not a date or date range). Use "w", "d", "h" and "m" to specify weeks, days, hours, or
minutes.

Syntax
originalEstimate

Alias
timeOriginalEstimate

Field Type DURATION

Auto-complete No
= , != , > , >= , < , <=
Supported operators
IS , IS NOT, IN , NOT IN
~ , !~
Unsupported operators
WAS, WAS IN, WAS NOT, WAS NOT IN , CHANGED 
Supported functions None
 Find issues with an original estimate of 1 hour:
originalEstimate = 1h
 Find issues with an original estimate of more than 2
Examples
days:
originalEstimate > 2d

Parent
Search for all subtasks of a particular issue in company-managed projects or subtasks of
a particular epic in team-managed projects. You can search by issue key or by issue ID
(i.e. the number that Jira automatically allocates to an Issue).

Syntax
parent

Field Type ISSUE

Auto-complete No
= , !=
Supported operators
IN , NOT IN
> , >= , < , <= , ~ , !~
Unsupported
IS , IS NOT, WAS, WAS IN, WAS NOT, WAS NOT IN ,
operators
CHANGED 
Supported functions None
 Find issues that are sub-tasks of issue TEST-1234:
Examples parent = TEST-1234

Priority
Search for issues with a particular priority. You can search by priority name or
priority ID (i.e. the number that Jira automatically allocates to a priority).

Note, it is safer to search by priority ID than by priority name. It is possible for your Jira
administrator to change the name of a priority, which could break any saved filter that
rely on that name. Priority IDs, however, are unique and cannot be changed.

Syntax
priority

Field Type PRIORITY

Auto-complete Yes
Supported = , != , > , >= , < , <= IS , IS NOT, IN , NOT IN , WAS, WAS IN,
operators WAS NOT, WAS NOT IN , CHANGED 
Unsupported
~ , !~
operators
Supported
None
functions
 Find issues with a priority of "High":
priority = High
Examples  Find issues with a priority ID of 10000:
priority = 10000

Project
Search for issues that belong to a particular project. You can search by project name, by
project key or by project ID (i.e. the number that Jira automatically allocates to a
project). In the rare case where there is a project whose project key is the same as
another project's name, then the project key takes preference and hides results from the
second project.

Syntax
project

Field Type PROJECT

Auto-complete Yes
Supported = , !=
operators IS , IS NOT, IN , NOT IN
Unsupported > , >= , < , <= , ~ , !~
operators WAS, WAS IN, WAS NOT, WAS NOT IN , CHANGED 
When used with the IN and NOT IN operators, project supports:

Supported  projectsLeadByUser()
functions  projectsWhereUserHasPermission()
 projectsWhereUserHasRole()

Examples  Find issues that belong to the Project that has the name
"ABC Project":
project = "ABC Project"
 Find issues that belong to the project that has the key
"ABC":
project = "ABC"
 Find issues that belong to the project that has the ID
"1234":
 project = 1234

Project type
Search for issues that belong to a particular type of project, either:

 “business” which finds issues created in Jira Work Management projects

 “software” which finds issues created in Jira Software projects
 “service_desk” which finds issues created in Jira Service Management projects

Results depend on your permission level. You will only see results for products you
have access to. Learn more about product access.

Syntax projectType
Auto-complete Yes
=, !=
Supported operators
IN, NOT IN
>, >=, <, <=, ~, !~
Unsupported operators
IS, IS NOT, WAS, WAS NOT, WAS NOT IN, CHANGED
Supported functions None
Find all issues in a software project:

projectType = ”software”

Find all issues in either a software project or a service project:

Examples
projectType = ”software” OR projectType = ”service_desk”

Find all issues that aren’t in a software project:

projectType != ”software”

Remaining estimate
Only available if time-tracking has been enabled by your Jira administrator.

Search for issues where the remaining estimate is set to a particular value (i.e. a number,
not a date or date range). Use "w", "d", "h" and "m" to specify weeks, days, hours, or
minutes.

Syntax
remainingEstimate

Alias
timeEstimate

Field Type DURATION

Auto-complete No
= , != , > , >= , < , <=
Supported operators
IS , IS NOT, IN , NOT IN
Unsupported ~ , !~
operators WAS, WAS IN, WAS NOT, WAS NOT IN , CHANGED 
Supported functions None
 Find issues with a remaining estimate of more than 4
hours:
Examples
remainingEstimate > 4h

Reporter
Search for issues that were reported by a particular user. This may be the same as the
creator, but can be distinct. You can search by the user's full name, ID, or email address.

Syntax
reporter

Field Type USER

Auto-complete Yes
= , !=
Supported
IS , IS NOT, IN , NOT IN , WAS, WAS IN, WAS NOT, WAS
operators
NOT IN , CHANGED
Unsupported
~ , !~ , > , >= , < , <=
operators
When used with the IN and NOT IN operators, this field supports:

 membersOf()
Supported
When used with the EQUALS and NOT EQUALS operators, this
functions
field supports:

 currentUser()

 Search for issues that were reported by Jill Jones:

reporter = "Jill Jones"orreporter = jjones
 Search for issues that were reported by the user with email
address [email protected]:
Examples
o reporter = "[email protected]"
(Note that full-stops and "@" symbols are reserved  characters, so the email address needs
to be surrounded by quote-marks.)
Request channel type
Used in Jira Service Management  only.

Search for requests by the channel that they were created by. For example, you could
search for all requests that were emailed to the service project, or all requests that were
sent from a customer portal.

Syntax
request-channel-
type
Field Type TEXT
Auto-complete Yes
= , !=
Supported
operators
IS, IS NOT, IN, NOT IN
Unsupported ~ , !~ , > , >= , < , <= WAS, WAS IN, WAS NOT, WAS NOT IN,
operators  CHANGED
When used with the IN and NOT IN operators, this field supports:

 email: requests sent by email

 jira: issues created in Jira (by clicking the blue Create
Supported button)
functions  portal: requests sent from a service project portal
 anonymous portal: requests sent from the customer portal
by a customer who was not logged in
 api: requests sent by REST API

 Find requests where the request channel was email:

request-channel-type = email
 Find requests where the request channel was something
other than a service project portal:
Examples request-channel-type != portal
 Find requests where the request channel was sent by a
CI/CD deployment tool:
request-channel-type = deployment

Request last activity time

Used in Jira Service Management  only.

Search for requests that were created on, before, or after a particular date (or date
range). Note that if a time-component is not specified, midnight will be assumed. Search
results are relative to your configured time zone (which is by default the Jira server's
time zone).

Use one of the following formats:

"yyyy/MM/dd HH:mm"
"yyyy-MM-dd HH:mm"
"yyyy/MM/dd"
"yyyy-MM-dd"

Or use "w" (weeks), "d" (days), "h" (hours) or "m" (minutes) to specify a date relative to

the current time. The default is "m" (minutes). Be sure to use quote-marks ("); if you
omit the quote-marks, the number you supply will be interpreted as milliseconds after
epoch (1970-1-1).

Syntax
request-last-
activity-time
Field Type DATE
Auto-complete Yes
= , != , > , >= , < , <=
Supported
operators
IS, IS NOT, IN, NOT IN
Unsupported
~ , !~WAS, WAS IN, WAS NOT, WAS NOT IN, CHANGED
operators 
When used with the EQUALS, NOT EQUALS, GREATER
THAN, GREATER THAN EQUALS, 
LESS THAN or LESS THAN EQUALS operators, this field
supports:

 currentLogin()
 lastLogin()
 now()
Supported
 startOfDay()
functions
 startOfWeek()
 startOfMonth()
 startOfYear()
 endOfDay()
 endOfWeek()
 endOfMonth()
 endOfYear()

Examples  Find all issues last acted on before 23rd May 2016:
request-last-activity-time < "2016/05/23"
o Find all issues last acted on or before 23rd May
2016:
request-last-activity-time <= "2016/05/23"
o Find all issues created on 23rd May 2016 and last
acted on before 2:00pm that day:
created > "2016/05/23" AND request-last-activity-
time < "2016/05/23 14:00" 
o Find issues last acted on less than one day ago:
request-last-activity-time > "-1d"
 o Find issues last acted on in January 2016:
request-last-activity-time > "2016/01/01" and
request-last-activity-time < "2016/02/01"

Resolution
The resolution field doesn't exist in Jira Service Management team-managed projects.
This means you can't search for issues in Jira Service Management team-managed
projects with the resolution field. Instead, you can use the statusCategory field (an issue
is resolved when statusCategory = Done).

Search for issues that have a particular resolution. You can search by resolution name or
resolution ID (i.e. the number that Jira automatically allocates to a resolution).

Note, it is safer to search by resolution ID than by resolution name. It is possible for

your Jira administrator to change the name of a resolution, which could break any saved
filter that rely on that name. Resolution IDs, however, are unique and cannot be
changed.

Syntax
resolution

Field Type RESOLUTION

Auto-complete Yes
= , != , > , >= , < , <=
Supported
IS , IS NOT, IN , NOT IN , WAS, WAS IN, WAS NOT, WAS
operators
NOT IN , CHANGED
Unsupported
~ , !~
operators
Supported functions None
 Find issues with a resolution of "Cannot Reproduce" or
"Won't Fix":
resolution in ("Cannot Reproduce", "Won't Fix")
 Find issues with a resolution ID of 5:
Examples
resolution = 5
 Find issues that do not have a resolution:
resolution = unresolved

Resolved
Search for issues that were resolved on, before, or after a particular date (or date range).
Note that if a time-component is not specified, midnight will be assumed. Please note
that the search results will be relative to your configured time zone (which is by default
the Jira server's time zone).

Use one of the following formats:

"yyyy/MM/dd HH:mm"
"yyyy-MM-dd HH:mm"
"yyyy/MM/dd"
"yyyy-MM-dd"

Or use "w" (weeks), "d" (days), "h" (hours) or "m" (minutes) to specify a date relative to

the current time. The default is "m" (minutes). Be sure to use quote-marks ("); if you
omit the quote-marks, the number you supply will be interpreted as milliseconds after
epoch (1970-1-1).

Syntax
resolved

Alias
resolutionDate

Field Type DATE

Auto-complete No
Supported = , != , > , >= , < , <=
operators IS , IS NOT, IN , NOT IN
Unsupported
~ , !~ WAS, WAS IN, WAS NOT, WAS NOT IN , CHANGED
operators
When used with the EQUALS, NOT EQUALS, GREATER
THAN, GREATER THAN EQUALS, LESS THAN or LESS
THAN EQUALS operators, this field supports:

 currentLogin()
 lastLogin()
 now()
Supported  startOfDay()
functions  startOfWeek()
 startOfMonth()
 startOfYear()
 endOfDay()
 endOfWeek()
 endOfMonth()
 endOfYear()

Examples  Find all issues that were resolved before 31st December
2010:
resolved < "2010/12/31"
 Find all issues that were resolved before 2.00pm on 31st
December 2010:
resolved < "2010/12/31 14:00"
 Find all issues that were resolved on or before 31st
December 2010:
resolved <= "2011/01/01"
 Find issues that were resolved in January 2011:
resolved > "2011/01/01" and resolved < "2011/02/01"
  Find issues that were resolved on 15 January 2011:
resolved > "2011/01/15" and resolved < "2011/01/16"
 Find issues that were resolved in the last hour:
resolved > -1h

SLA
Used in Jira Service Management  only.

Search and sort through your requests to ensure that you're hitting your SLA goals. You
can search for requests whose SLAs are in a certain state of completion, or that have a
certain amount of time on their SLA clock. 

Syntax
Time to
resolution

Time to first
response

<your custom SLA

name>
Field Type SLA
Auto-complete No
Supported
= , !=, > , >= , < , <=
operators
~ , !~
Unsupported
IS , IS NOT , IN , NOT IN , WAS, WAS IN, WAS NOT, WAS
operators
NOT IN , CHANGED
 breached()
 completed()
 elapsed()
 everBreached()
Supported
 paused()
functions
 remaining()
 running()
 withinCalendarHours()

Examples  Find issues where Time to First Response was breached:

"Time to First Response" = everBreached()
 Find issues where the SLA for Time to Resolution is
paused due to a condition:
"Time to Resolution" = paused()
 Find issues where the SLA for Time to Resolution is
paused due to the SLA calendar:
"Time to Resolution" = withinCalendarHours()
 Find issues that have been waiting for a response for more
 than 1 hour:
"Time to First Response" > elapsed("1h")
 Find issues that that will breach Time to First Response in
the next two hours:
"Time to First Response" < remaining("2h")

Sprint
Search for issues that are assigned to a particular sprint. This works for active sprints
and future sprints. The search is based on either the sprint name or the sprint ID (i.e. the
number that Jira automatically allocates to a sprint).

If you have multiple sprints with similar (or identical) names, you can simply search by
using the sprint name — or even just part of it. The possible matches will be shown in
the autocomplete drop-down, with the sprint dates shown to help you distinguish
between them. (The sprint ID will also be shown, in brackets).

Syntax
sprint

Field Type NUMBER

Auto-complete Yes
Supported = , !=
operators IS , IS NOT, IN , NOT IN
Unsupported ~ , !~ , > , >= , < , <= WAS, WAS IN, WAS NOT, WAS NOT
operators IN , CHANGED
 openSprints()
Supported functions  closedSprints()

 Find issues that belong to sprint 999:

sprint = 999
 Find issues that belong to sprint "February 1":
sprint = "February 1"
 Find issues that belong to either "February 1", "February
Examples
2" or "February 3":
sprint in ("February 1","February 2","February 3")
 Find issues that are assigned to a sprint:
sprint is not empty

Status
Search for issues that have a particular status. You can search by status name or
status ID (i.e. the number that Jira automatically allocates to a status).
It’s safer to search by status ID than status name since it’s possible for your Jira
administrator to change the name of a status, which would break any saved filter that
relies on that name. Status IDs, however, are unique and cannot be changed.

The WAS, WAS NOT, WAS IN and WAS NOT IN operators can only be used with the
name, not the ID.

Syntax
status

Field Type STATUS

Auto-complete Yes
= , !=
Supported
IS , IS NOT, IN , NOT IN , WAS, WAS IN, WAS NOT, WAS
operators
NOT IN , CHANGED
Unsupported
~ , !~ , > , >= , < , <=
operators
Supported functions None
 Find issues with a status of "Open":
status = Open
 Find issues with a status ID of 1:
status = 1
Examples
 Find issues that currently have, or previously had, a status
of "Open":
status WAS Open

Summary
Search for issues where the summary contains specific text using Jira text-search
syntax. Learn more about searching syntax for text fields.

Syntax
summary

Field Type TEXT

Auto-complete No
~ , !~
Supported operators
IS , IS NOT
= , != , > , >= , < , <=
Unsupported
IN , NOT IN , WAS, WAS IN, WAS NOT, WAS NOT IN ,
operators
CHANGED
Supported functions None
 Find issues where the summary contains the words
"Error saving file":
Examples
summary ~ "Error saving file"
Text
This is a master-field that allows you to search all text fields for issues, such as:

 Summary
 Description
 Environment
 Comments
 custom fields that use the "free text searcher"; this includes custom fields of the
following built-in custom field types:
o Free text field (unlimited text)
o Text field (< 255 characters)
o Read-only text field

Search for issues that have certain text present using Jira text-search syntax. Learn more
about searching syntax for text fields.

The text master-field can only be used with the CONTAINS operator ("~").

Syntax
text

Field Type TEXT

Auto-complete No
Supported
~
operators
!~, = , != , > , >= , < , <=
Unsupported
IS , IS NOT , IN , NOT IN , WAS, WAS IN, WAS NOT, WAS
operators
NOT IN , CHANGED
Supported functions None
 Find issues where a text field contains the word "Fred":
text ~ "Fred"
or
text ~ Fred
Examples
 Find all issues where a text field contains the words "full
screen":
text ~ "full screen"

Time spent
Only available if time-tracking has been enabled by your Jira administrator.

Search for issues where the time spent is set to a particular value (i.e. a number, not a
date or date range). Use "w", "d", "h" and "m" to specify weeks, days, hours, or
minutes.
 Syntax
timeSpent

Field Type DURATION

Auto-complete No
= , != , > , >= , < , <=
Supported operators
IS , IS NOT , IN , NOT IN
~ , !~ 
Unsupported operators
WAS, WAS IN, WAS NOT, WAS NOT IN , CHANGED
Supported functions None
 Find issues where the time spent is more than 5 days:
Examples timeSpent > 5d

Type
Search for issues that have a particular issue type. You can search by issue type name or
issue type ID (i.e. the number that Jira automatically allocates to an issue type).

Note, it is safer to search by type ID than type name. It is possible for your Jira

administrator to change the name of a type, which could break any saved filter that rely
on that name. Type IDs, however, are unique and cannot be changed.

Syntax
type

Alias
issueType

Field Type ISSUE_TYPE

Auto-complete Yes
= , !=
Supported operators
IS , IS NOT , IN , NOT IN
Unsupported ~ , !~  , > , >= , < , <=
operators WAS, WAS IN, WAS NOT, WAS NOT IN , CHANGED
Supported functions None
 Find issues with an issue type of "Bug":
type = Bug
 Find issues with an issue typeof "Bug" or
"Improvement":
Examples
issueType in (Bug,Improvement)
 Find issues with an issue type ID of 2:
issueType = 2

Updated
Search for issues that were last updated on, before, or after a particular date (or date
range). Note that if a time-component is not specified, midnight will be assumed. Please
note that the search results will be relative to your configured time zone (which is by
default the Jira server's time zone).

Use one of the following formats:

"yyyy/MM/dd HH:mm"
"yyyy-MM-dd HH:mm"
"yyyy/MM/dd"
"yyyy-MM-dd"

Or use "w" (weeks), "d" (days), "h" (hours) or "m" (minutes) to specify a date relative to

the current time. The default is "m" (minutes). Be sure to use quote-marks ("); if you
omit the quote-marks, the number you supply will be interpreted as milliseconds after
epoch (1970-1-1).

Syntax
updated

Alias
updatedDate

Field Type DATE

Auto-complete No
Supported = , != , > , >= , < , <=
operators IS , IS NOT , IN , NOT IN
Unsupported ~ , !~ 
operators WAS, WAS IN, WAS NOT, WAS NOT IN , CHANGED
When used with the EQUALS, NOT EQUALS, GREATER
THAN, GREATER THAN EQUALS,
LESS THAN or LESS THAN EQUALS operators, this field
supports:

 currentLogin()
 lastLogin()
 now()
Supported
 startOfDay()
functions
 startOfWeek()
 startOfMonth()
 startOfYear()
 endOfDay()
 endOfWeek()
 endOfMonth()
 endOfYear()

Examples  Find issues that were last updated before 12th December
2010:
updated < "2010/12/12"
  Find issues that were last updated on or before 12th
December 2010:
updated < "2010/12/13"
 Find all issues that were last updated before 2.00pm on 31st
December 2010:
updated < "2010/12/31 14:00"
 Find issues that were last updated more than two weeks
ago:
updated < "-2w"
 Find issues that were last updated on 15 January 2011:
updated > "2011/01/15" and updated < "2011/01/16"
 Find issues that were last updated in January 2011:
updated > "20011/01/01" and updated < "2011/02/01"

Voter
Search for issues for which a particular user has voted. You can search by the user's full
name, ID, or email address. Note that you can only find issues for which you have the
"View Voters and Watchers" permission, unless you are searching for your own votes. 

Syntax
voter

Field Type USER

Auto-complete Yes
Supported = , !=
operators IS , IS NOT , IN , NOT IN
Unsupported ~ , !~ , > , >= , < , <=
operators WAS, WAS IN, WAS NOT, WAS NOT IN , CHANGED
When used with the IN and NOT IN operators, this field
supports:

 membersOf()
Supported
functions When used with the EQUALS and NOT EQUALS operators,
this field supports:

 currentUser()

 Search for issues that you have voted for:

voter = currentUser()
 Search for issues that the user "jsmith" has voted for:
voter = "jsmith"
Examples
 Search for issues for which a member of the group "jira-
administrators" has voted:
voter in membersOf("jira-administrators")
Votes
Search for issues with a specified number of votes.

Syntax
votes

Field Type NUMBER

Auto-complete No
= , != , > , >= , < , <=
Supported operators
IN , NOT IN
~ , !~ 
Unsupported
IS , IS NOT , WAS, WAS IN, WAS NOT, WAS NOT IN ,
operators
CHANGED
Supported functions None
 Find all issues that have 12 or more votes:
Examples votes >= 12

Watcher
Search for issues that a particular user is watching. You can search by the user's full
name, ID, or email address. Note that you can only find issues for which you have the
"View Voters and Watchers" permission, unless you are searching for issues where you
are the watcher. See also watchedIssues.

Syntax
watcher

Field Type USER

Auto-complete Yes
Supported = , !=
operators IS , IS NOT , IN , NOT IN
Unsupported ~ , !~ , > , >= , < , <=
operators WAS, WAS IN, WAS NOT, WAS NOT IN , CHANGED
When used with the IN and NOT IN operators, this field supports:

 membersOf()
Supported
When used with the EQUALS and NOT EQUALS operators, this
functions
field supports:

 currentUser()

Examples  Search for issues that you are watching:

watcher = currentUser()
 Search for issues that the user "jsmith" is watching:
 watcher = "jsmith"
 Search for issues that are being watched by a member of
the group "jira-administrators":
watcher in membersOf("jira-administrators")

Watchers
Search for issues with a specified number of watchers.

Syntax
watchers

Field Type NUMBER

Auto-complete No
= , != , > , >= , < , <=
Supported operators
IN , NOT IN
~ , !~ 
Unsupported
IS , IS NOT , WAS, WAS IN, WAS NOT, WAS NOT IN ,
operators
CHANGED
Supported functions None
 Find all issues that are being watched by more than 3
people:
Examples
watchers > 3

Worklog comment
This field is only available if time tracking has been enabled by your Jira administrator,
and can only support the CONTAINS operator ("~").

Search for issues that have certain text present in worklog comments using Jira text-
search syntax. Learn more about searching syntax for text fields.

Syntax
worklogComment

Field Type TEXT

Auto-complete No
Supported operators ~
!~, = , != , > , >= , < , <=
Unsupported
IS , IS NOT , IN , NOT IN , WAS, WAS IN, WAS NOT, WAS
operators
NOT IN , CHANGED
Supported functions None
Examples  Find issues where a worklog comment contains the word
"Fred":
worklogComment ~ "Fred"
  Find all issues where a worklog comment contains the
words "full screen":
worklogComment ~ "full screen"

Worklog date
Only available if time-tracking has been enabled by your Jira administrator.

Search for issues with work logged on a specific date

Syntax
worklogDate

Field Type DATE

Auto-complete No
Supported = , != , > , >= , < , <=
operators IS , IS NOT , IN , NOT IN
Unsupported ~ , !~ 
operators WAS, WAS IN, WAS NOT, WAS NOT IN , CHANGED
When used with the EQUALS, NOT EQUALS, GREATER
THAN, GREATER THAN EQUALS,
LESS THAN or LESS THAN EQUALS operators, this field
supports:

 currentLogin()
 lastLogin()
 now()
Supported
 startOfDay()
functions
 startOfWeek()
 startOfMonth()
 startOfYear()
 endOfDay()
 endOfWeek()
 endOfMonth()
 endOfYear()

 Find issues where someone logged work on 12th December

2010:
worklogDate = "2010/12/12"
Examples  Find the issues where someone has logged work in the past
week:
worklogDate > startOfWeek()

Work ratio
Only available if time-tracking has been enabled by your Jira administrator.
Search for issues where the work ratio has a particular value. Work ratio is calculated as
follows: workRatio = timeSpent / originalEstimate) x 100

Syntax
workRatio

Field Type NUMBER

Auto-complete No
= , != , > , >= , < , <=
Supported operators
IS , IS NOT , IN , NOT IN
Unsupported ~ , !~ 
operators WAS, WAS IN, WAS NOT, WAS NOT IN , CHANGED
Supported functions None
 Find issues on which more than 75% of the original
estimate has been spent:
Examples
workRatio > 75