Profile

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

 

Coordonnées
12 BD DES FAR HAY AL AMAL
Mohamed Amine ZOUHRI
BERRECHID xHEV Powertrain engineer
0620437109 (Home) Casablanca et périphérie
[email protected]

www.linkedin.com/in/mohamed- Résumé
amine-zouhri-07602b161
(LinkedIn) C'est bien de dire toujours "pourquoi" pour bien comprendre la
source des choses,mais aussi c'est très bien de dire "pourquoi pas"
Principales compétences après avoir comprendre le pourquoi des choses.
Ingénierie J'adore trop découvrir, améliorer et inventer de nouvelles choses qui
Électronique n'ont jamais existé.
Systèmes embarqués

Certifications Expérience
Certificate of Achievement " Active
Energy Efficiency Using Speed SHERPA ENGINEERING
Control " xHEV Powertrain engineer
Introduction to Programming with novembre 2021 - Present (9 mois)
MATLAB Casablanca et périphérie
Introduction to Power Electronics
Data Center Efficiency: Reducing
Electrical Power Consumption ALTEN
MATLAB Onramp Electronic Development Manager
septembre 2021 - novembre 2021 (3 mois)
Rabat, Rabat-Salé-Kénitra, Maroc

Ensure the process of formalising the objects describing the client's entire
telematics computer for the Electronic domain, i.e. the software, the calibration,
the hardware, the data.
- Consolidate the inputs necessary for the officialization with the development
and project managers of the telematics computer.
- Verification of the conformity of the data.
- Ensure the data input process in the PLM in compliance with the
manufacturer's constraints and standards.
- Ensuring the timing / planning of the officializations in compliance with the
planning constraints

Raynov
Final Project Study
mars 2021 - juillet 2021 (5 mois)
Rabat, Rabat-Salé-Kénitra, Maroc

Study, design and realization of a Battery Management System (BMS) for


electric vehicles
  Page 1 of 3
   

ENSAM Rabat
Modeling and Design for a wind turbine generator using matlab-simulink
janvier 2021 - février 2021 (2 mois)
Rabat

In one for the finest project what i was developed in my career like an electrical
engineer ; Wind energy utilization for power generation purpose is becoming
high interest in electrical power production as a result of easy access to the
wind and not be affected by any environment that is clean and sustainable
source of energy.
i was modeling equation for Power coefficient CP , Mechanical power in the
moving air P.

Indépendant
Analysis and Design of an Electronic Card for an Electric Vehicle
Charging Station
juillet 2020 - septembre 2020 (3 mois)
Berrechid, Casablanca-Settat, Maroc

The project is based on the technology of recharging By sockets for electric


vehicles, in this project I studied the function of the J1772 Plug,
The J1772 give 3 level socket from Pilot Pin signals in forme PWM advance
control, each level has a designation:

1-Level 1 (NOT connected): output voltage of Pilot Pin 12 v (red led)


2-Level 2 (ready to charge): output voltage of Pilot Pin 9 v (yellow led)
3-Level 3 ( charging ) : output voltage of Pilot Pin 9 v6 v (Led vert )

For the design of the card I used several compasses but for the most important
components:
• Optocoupler 4N35: for isolation of the processing unit (3v) and the card (12 v)
• LM358 Dual Operational Amplifier (Opamp): for the comparison of the output
voltage of the Pilot Pin with fixes voltage set by a potentiometer

Note 1: I do not have a J1772 plug, I replaced it with a petentiometer


Note 2: I have not tested the card on a 22kw electric vehicle

ENSAM Rabat
End Of Year Project : Realization of a prototype of a "Connected
House" (IOt)
février 2020 - juin 2020 (5 mois)
Rabat, Rabat-Salé-Kénitra, Maroc

  Page 2 of 3
   

- Electrical installation of the sensors and development code using arduino


ATMEGA328p.
- Design of an interface on RASPBERRY PI 4 for the supervision.
- Implementation of a wireless link (WIFI).

QSA Aeronautical Engineering Services


Stagiaire
juillet 2019 - septembre 2019 (3 mois)
MARRAKECH

I was participating in the maintenance at aircraft with staff technique of


QSA , and i was designed a report to description the electricity power and
component of aircraft

Formation
ENSAM RABAT
Engineer's degree , Electrical and Electronics Engineering, Génie
électrique · (2018 - 2021)

CPGE - Classes préparatoires aux grandes écoles


 · (2015 - 2018)

ENSAM Rabat
Electrical engineering  

  Page 3 of 3

You might also like