Scribd
Upload
297 views1 page

Rotating Mandrel Casing Hanger

Rotating casing hanger

Uploaded by

Jonatan Stoppo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
297 views1 page

Rotating Mandrel Casing Hanger

Rotating casing hanger

Uploaded by

Jonatan Stoppo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Rotating Mandrel Casing Hanger

Improve cement job integrity and wellbore stability during drilling


APPLICATIONS The rotating mandrel casing hanger is designed
■■ Highly deviated wells to improve cement job integrity and wellbore
■■ Vertical drilling stability for vertical and horizontal oil and gas
wells. The hanger’s unique features and running
■■ Horizontal drilling
tool enable the operator to rotate the production
BENEFITS casing during installation as well as during
■■ Improve bond integrity of cement job cementing operations. This optimizes installation
■■ Optimize installation of production casing of the production casing during installation
through restrictions in highly deviated wells and
FEATURES improves the bond integrity of the cement job.
■■ Hanger with effective dynamic rotation by The hanger can be installed in a 135/8-in MN-DS*
the operator promotes better displacement mutibowl nested-diverter snap ring wellhead
efficiencies, effective zonal isolation, system and is rated up to 10,000-psi working
and less eccentricity in the pipe during pressure and 15,000-psi frac working pressure.
cement jobs
■■ Milled flats and four spring loaded
torque dogs in running tool to
ensure fast, simple makeup/breakup
(RH Rotation/LH disengagement)
■■ Fluted mandrel hanger allows for taking
returns during the cementing process
■■ Hanger can be internally locked down
by a packoff rated to 10,000 psi, with an
integral snap ring
Rotating mandrel casing hanger
■■ Hanger can be run as a standard hanger RP-003069 rev 03
by removing the torque dogs
■■ Designed to withstand 20,000 ft-lbf of
rotational torque
■■ Right hand running threads
■■ The hanger can be isolated by installing a
BPV in the BPV threads
■■ The DSTA cap can be installed with double
“P” seals to fit mandrel or slip hangers for
inventory and standardization purposes

*­ Mark of Schlumberger
Other company, product, and service names
are the properties of their respective owners.
Copyright © 2016 Schlumberger. All rights reserved. SUR-1031 slb.com/rotatinghanger

You might also like