Technical data

TECHNICAL DATA

DMS – APELEM
TDA_OPTIMA_01
 TECHNICAL DATA – REMOTE CONTROLLED TABLE

REMOTE CONTROLLED TABLE

MODELS

Optima dRF (digital version)

Optima (conventional version)

MOTORIZED TILTING

Tilting angle +90°/ -30° with self-acting stop at 0°

Tilt speed Factory setting up to 4.5°/sec

X-RAY TUBE

±180°with possibility to operate from control console / table side control keyboard (or touchscreen collimator, IR
Rotation (motorized)
remote control or hands-free positioning pedal in option)
Rotation speed Up to 17°/sec with self-acting a stop at 0°, 90°, -90°, 180°and -180°
Oblique projections ±45°with parallax correction
Parallax correction Automatic
Source to Image
110 – 180 cm, continuously variable (tube detector aligned)
Distance (S.I.D)
S.I.D speed Up to 4 cm/sec
Variable longitudinal
0 – 16 cm/sec independent from the detector carriage
speed

COMPRESSION CONE

Compression cone 0-160 N with a compression indication above 3 kg, easily removable in the event of power failure
Compression type Motorized movement with manual extraction
Range compression
Min. 10 cm – Max. 40 cm / Min. 8 cm – Max 38 cm with longitudinal movement of table top (4 ways)
stroke
Safety on applied
Mechanical & electronic
force

TABLE AND PATIENT TABLE TOP

Type Laminated table top, Carbon fiber (option)

Transversal tabletop
35 cm (+/- 17.5 cm)
movement
Longitudinal tabletop
Factory setting 100 cm (± 50 cm) can be configured up to 150 cm (+/- 75 cm) as option
movement
Table top dimensions 240 X 85 cm
Height of the table
79.9 cm
top
Longitudinal patient 196 cm with 2 way movement of table top
coverage > 280 cm with 4 way movement of table top
Maximum patient 200 kg with no limitations to any of the movements
weight 200 kg load on the footrest

DMS -APELEM PAGE 2 OF 12

TDA_OPTIMA_01
 TECHNICAL DATA – REMOTE CONTROLLED TABLE

DETECTOR CARRIAGE

AEC measuring
Predisposed for 3 fields ionization chamber
chamber
Longitudinal 153 cm with 2 way movement of the table top
movement 134 cm with 4 way movement of the table top
Variable speed Up to 16 cm/sec
Patient-detector
6.8 cm for 2 way table top / 8.8 cm for 4 way table top
distance

TOMOGRAPHY

Focal distance Preset to 115 cm (available to 110 up to 180 on request)

Angles Factory setting: 5 angles (8°, 20°, 30°, 45°, 60°) other angles configurable on request, up to 3 speeds by angle
Exposure time Configurable for each angle / within the range of 1.5 - 4 sec. The minimum and maximum time will depend on the angle
Layer height 0 - 35 cm
Step 1 mm (adjustable)

OTHER FEATURES

All table movements and generator control are possible from the control console
All controls are user friendly and easily accessible.
Simultaneous movements available
Unlimited preset positioning

DMS -APELEM PAGE 3 OF 12

TDA_OPTIMA_01
 TECHNICAL DATA – REMOTE CONTROLLED TABLE

STANDARD ACCESSORIES

Weight 12 kg (standard), 9 kg (“light” carbon model - optional)

Minimum distance to the floor 15 cm (bottom of foot rest to the floor) – 5 cm with 4 way movement option
Footrest
Characteristics 8 notches on both side of the table
Fixation mode Press and release
Compression band (Plastic or cloth)
Mechanical compression with compression cone 200 mm
Handles supports

OPTIONAL ACCESSORIES

Stool that can be fixed to the foot rest

Shoulder supports
Gynecological stirrup
Additional compression cones ( 250mm, 300mm, stomach and lungs)
Lateral cassette holder (35x43 cm)
Pediatric cradle
Accessory support with fixation on rails
RAD/Fluoro pedal
Mattress
Cephalic fixer
Drip holder
Boomerang filter
Spine filter
Lung filter
Pelvis filter
Rectangular cones (open field):150X400, 300X400, 240X300 mm
Lateral Bar
Grid holder fixed to the wall
Double rail adapter 176 mm for the collimator
Cup holder
Step stool
Other accessories available on request as needed

DMS -APELEM PAGE 4 OF 12

TDA_OPTIMA_01
 TECHNICAL DATA – REMOTE CONTROLLED TABLE

SOFTWARE OPTIONS

Peripheral Angiography (DSA), Stitching

COMFORT PACK

Ambient Light
CCD camera integrated into the collimator to supervise patient positioning
Smooth movement of the table for maximum patient comfort and safety

SOUND PACK (OPTIONS)

Speakers
Music Player
Microphone

CONTROL CONSOLE

Large color touch screen 12”

Microphone for communicating with patient
Generator control directly from control console with APR management
Dimensions: 360 (W) x 590 (L) x 130 (H) mm - < 7 kg
Centering buttons
« Move » button
Management of all movements by joysticks

TABLE CONTROL

Remote maintenance via VPN (availability depends on the customer’s network configuration)
Possibility for second console in exam room
Graphic interface on control console available in several languages

OPTIONAL TABLE CONTROL

Hands-free positioning pedal for table’s movements

Touchscreen collimator (table’s movement, generator management & display)
IR remote control

SAFETY

Intelligent 3D anti-collision system included in motor axis controller adaptable to each examination room
“Deadman” functions on josticks
Optic sensors for detection of objects during table tilting (option)
Automatic lock of the table side control keyboard

DMS -APELEM PAGE 5 OF 12

TDA_OPTIMA_01
 TECHNICAL DATA – REMOTE CONTROLLED TABLE

GENERATORS & X-RAY TUBES

OPTIMA

MAGNUM -> See technical data « TDA_RFGENERATORS&TUBESX-RAY»

IMAGE ACQUISITION SYSTEM & COLLIMATORS

OPTIMA DRF

RF4343 & RF4343FL -> See technical data “ TDA_DRFDETECTORS&SOFTWARES”

OPTIMA CONVENTIONAL

TV Chain & FLASH-> See technical data « TDA_CONVENTIONAL_TVCHAIN&FLASH»

FLAT PANEL DETECTOR WIFI (OPTION)

Pixium EZ -> See technical data “TDA_PIXIUM_EZ”

SCREEN SUPPORT

TROLLEY ON WHEELS WITH SINGLE SCREEN

Max dimensions 582 (L) x 440 (l) x 1582 (H) mm

Weight of the supported screen 5.5 kg
Total weight load 11.8 kg
Vertical and horizontal rotation yes
Type attachment VESA

TROLLEY ON WHEELS WITH DOUBLE SCREEN

Max dimensions 520 (L) x 430 (l) x 1702 (H) mm

Weight of the supported screen 12.7 kg for both screens
Total weight load 22 kg
Vertical and horizontal rotation yes
Type attachment VESA

CEILING SUSPENSION FOR SINGLE OR DOUBLE SCREEN (IN OPTION)

DMS -APELEM PAGE 6 OF 12

TDA_OPTIMA_01
 TECHNICAL DATA – REMOTE CONTROLLED TABLE

CEILING SUSPENSION (option)

STANDARD SPECIFICATIONS

Model CS3
175 kg for rails and transversal bridge
Weight
140 kg for stand
Longitudinal rail 440 cm
Transversal rail 300 cm
Vertical movement 150 cm
Rotation of tube around vertical axe +260° -80° or + 140° -200°
Rotation of tube around horizontal axe +120° -210° or +210° -120°

ELECTRICAL REQUIREMENTS

Frequency 50 – 60 Hz
Voltage 230 Vac +/-10%

TECHNICAL DRAWINGS (DIMENSIONS IN MM)

DMS -APELEM PAGE 7 OF 12

TDA_OPTIMA_01
 TECHNICAL DATA – REMOTE CONTROLLED TABLE

VERTICAL BUCKY STAND (OPTION)

VBS NO TILTING

Model VBS 24 TRN430

Distance of bucky top edge from floor 67 cm
Distance center of the Bucky from floor 41.3 cm
Bucky vertical travel 149.2 cm
Distance front panel top / film 4 cm
Absortion front panel in mm of Al equiv. 0.35
Weight (bucky included) 105 kg
Base support dimensions 59 x 72.5 x 5 cm
Grid standardly supplied FFD 150 cm R10:1 40l/cm

VBS TILTING

Model VBS TRTX43

Distance from top of bucky to ground 72.8 cm
Distance from bucky center to ground 43.8 cm
Bucky vertical travel 127 cm
Min. distance receptor horizontal position to
57.4 cm
ground
Distance front panel top / film 3.5 cm
Absortion front panel in mm of Al equiv. 0.35
Weight (bucky included) 200 kg
Base support dimensions 105.5 x 59 x 5 cm
Grid standardly supplied FFD 150 cm R10:1 40l/cm

OPTIONS AND ACCESSORIES AVAILABLE

Arm support
Support base
External cassette holder 35x43 cm - 40x90 cm - 40x120 cm
FFD 130 cm R 12:1 80 l/cm
Fixed and removable grids
FFD 180 cm R 12:1 80 l/cm
Bucky with manual cassette loading
Bucky with manual cassette loading and reading of the cassette size
Bucky with automatic cassette loading and reading of the cassette size
Support for measuring chamber
Device to detect the height position of the bucky
Tilting movement by motor (only for VBS tilting )
Vertical movement by motor (only fo VBS tilting)

DMS -APELEM PAGE 8 OF 12

TDA_OPTIMA_01
 TECHNICAL DATA – REMOTE CONTROLLED TABLE

ENVIRONMENTAL DATA
ELECTRICAL SPECIFICATIONS

Power supply voltage 400 VAC ± 10% (3 phases + ground)

Frequency 50 - 60 Hz
Maximum power 3.5 kW
Absorbed current 5A

ENVIRONMENTAL DATA

Operating temperature 17 to 32°C

Operating humidity 30 to 80 %
Pressure 700 to 1060 hPa
Storage temperature -10 to +50°C
Storage humidity 10 to 90 %
Noise < 55 dB
Generator (operating) 1172 W (4000 btu/h)
Heat dissipation Generator (at rest) 22 W (75 btu/h)
Table 200 W (682 btu/h

PHYSICAL DESCRIPTION
WEIGHT

dRF : 2-way 932 kg ; 4-way 1052 kg

Table
Conventional : 2-way 1000 kg ; 4-way 1120 kg
Control console 7 kg

DIMENSIONS

Table dimensions 2400(L) x 2125(l) x 1900(H) mm

MINIMUM SIZE OF THE ROOM

Height 265 cm
Surface area 440 cm (L) x 320 cm (W)

REGULATORY COMPLIANCE

Class I-applied parts type B, according to IEC 60601-1 3rd edition

Medical device class IIb, according to MDD 93/42/EEC Annex IX, rule 10

DMS -APELEM PAGE 9 OF 12

TDA_OPTIMA_01
 TECHNICAL DATA – REMOTE CONTROLLED TABLE

TECHNICAL DIAGRAMS
Dimensions in mm

DMS -APELEM PAGE 10 OF 12

TDA_OPTIMA_01
TECHNICAL DATA – REMOTE CONTROLLED TABLE

Dimensions in mm

DMS -APELEM PAGE 11 OF 12

TDA_OPTIMA_01
TECHNICAL DATA – REMOTE CONTROLLED TABLE

Dimensions in mm

DMS -APELEM PAGE 12 OF 12

TDA_OPTIMA_01