PD503-005

Surgical
Mobile C-Arm
Imaging System WHA-200 OPESCOPE PLENO

GENERAL
The OPESCOPE PLENO (WHA-200) is an imaging system which main applications are
X-ray fluoroscopy and radiography during surgery.
 WHA-200 OPESCOPE PLENO
FEATURES
1. Low irradiation 4. Compact and light
(1) The system offers genuine pulsed fluoroscopy at The system has been made angle-free and compact.
15 pulses per second as standard. Its light weight and large-diameter double wheel
(2) Three fluoroscopy modes are available: Normal, make it convenient to maneuver.
Low Dose and High Quality mode. The
combination of these modes with pulsed 5. Clean
fluoroscopy provides the flexibility to handle all The cables are incorporated into the C-arm, so they
situations. will not come into contact with the patient or surgical
(3) The system allows the insertion of a Beam instruments, allowing the system to be used safely.
Hardening (BH) filter to cut soft X-rays by up to
50%.
(4) The Virtual rotational function and virtual collimator
CONFIGURATION
function allow you to rotate, and perform virtual
collimator operations on, the last image hold (LIH) ① STANDARD CONSTITUTION
image. C-arm cart 1set
X-ray generator 1set
2. Speedy XTV system 1set
(1) The fully balanced C-arm is manually operated. X-ray tube 1set (including collimator)
The independent electromagnetic lock 23/16cm (9/6inch) I.I. 1set
mechanisms allow individual locking of all Monitor cart 1set (including 18"/2monitor)
movements, which ensures quick and accurate
positioning. ② OPTIONAL ITEM
(2) Pre-programmed anatomical programs can be • Hand switch
preset for each operated region providing optimal This is the hand switch for radiography film.
images by one-touch operation. • Laser pointer
＜APR Parameters＞ Built into the X-ray generator, projection type,
① X-ray conditions cross-shaped
(including fluoroscopy mode and pulse rate) • Cassette holder
② BH filter selection Usable cassettes: 24×30 cm (10"×12"),
③ I.I. field of view max.15mm thick
④ Parallel collimator (angle, aperture) • Sterilized cover
⑤ C-leaf collimator (aperture) There are disposable and washable (cloth) types of
⑥Camera (image) rotation position
sterilized cover.
⑦H/V reverse Either of these can be fitted.
⑧Program sequence • Image display on C-arm main panel
(3) The C-arm lock-free switch on the I.I. grabber This function enables the live monitor image to be
handle allows for rapid single-handed C-arm displayed on the C-arm’s main panel.
positioning. • Touch panel (on 18” LCD display monitor)
When you use a monitor with a touch panel as the
3. High quality imaging reference monitor, you can operate the
(1) The system incorporates a 1-million pixel CCD image-processing unit by used touch operations.
camera and a 100kHU X-ray tube for high- • DICOM STORAGE/ DICOM PRINT
resolution imaging. The images can be sent to DCIOM viewers or laser
(2) The high-speed 7.5 fps real-time DSA imaging imagers.
provides smoother dynamic imaging of blood flow.
(3) The RSM-DSA function generates no artifacts
(mis-registration) in case when the patient moves.

2
 WHA-200 OPESCOPE PLENO
SPECIFICATIONS
① C-arm cart
SID 900mm
Minimum horizontal X-ray level from floor 785mm (With C-arm above bed)
1095mm (With C-arm under bed)
C-arm rotation 120°
C-arm axial rotation 300/-120°
C-arm up/down travel 450mm
C-arm FWD/REV travel 200mm
C-arm swiveling ±12.5°
C-arm free space 700mm

② X-ray control unit

Nominal maximum output 2kW
Short time rating 60kV 200mAs
110kV 100mAs
Long time rating 110kV 3mA
60kV 5mA
110kV 5mA (High quality mode)
60kV 9mA (High quality mode)
Pulse fluoroscopy rating 110kV, 16mA
Digital radiography rating 110kV, 16mA
Radiographic tube current Max. 20mA
Setting range of tube voltage 40 to 110kV
Setting range of mAs 0.5 to 200mAs
Rate of pulse fluoroscopy 0.5, 1, 2, 3.75, 7.5, 15fps

③ X-ray tube
X-ray tube type Fixed anode type
Focal spot size 0.6mm
Anode heat storage capacity 100kHU
Tube assembly heat storage capacity 680kHU(480kJ)
Target (angle and material) 8°, Tungsten

④ Collimator
Octagonal collimator Electrical drive (opening/closing), made of Pb
Parallel collimator Electrical drive (opening/closing and rotation), made of Cu
Compensating filter Electrical drive (filter selection), made of Cu,
0.1,0.2,0.3mm thick

⑤ I.I.
Input field size 230mm/160mm(9/6 inch)
Central limiting resolution 50 lp/mm (9 inch)
60 lp/mm (6 inch)
DQE IEC standard 65%

⑥ Image processing section

Camera type 1 million pixel CCD camera
Image mode Continuous Fluoroscopy, Pulse Fluoroscopy
Spot, Serial, DSA, RSM-DSA, Mapping
Fluoroscopy 1024 ×1024 ×12bit Max. 30fps
Digital radiography 1024 ×1024 ×12bit Max. 7.5fps
Image processing Window/Level, Gamma, Edge Enhancement, Recursive
Filtering, Zooming(×2)& Panning, Multi Imaging Display,
Annotation, Measurement, Subtraction, Remask, Pixel shift,
Landmarking
Image storage Hard disk drive: max. 30,000 images (1024 ×1024,12bit)
CD-RW drive: max. 300 images (1024 ×1024,12bit)
Fluoroscopic loop image storage:
100 images (1024 ×1024,12bit)

⑦ TV monitor
Monitor type 18 inch LCD display monitor
⑧Grid
Grid ratio 10:1
Strips per centimeter 44 lines/cm
Inter space material Fiber

3
 WHA-200 OPESCOPE PLENO
Environmental Conditions and Power Supply
① Use Conditions
Temperature ： 10 to 35℃
Relative Humidity ： 30 to 85% (Free of dew condensation)
Atmospheric pressure ： 700 to 1060 hPa
Atmosphere ： Atmosphere without explosive gases or corrosive gases
② Power supply
System ： Single phase AC
Frequency ： 50 or 60Hz
Capacity ： 3kVA
Voltage and power impedance ： 100, 110, 120 V ±10% less than 0.2Ω
200, 220, 230, 240 ±10% less than 0.8Ω
Grounding ： less than 100Ω
Main breaker ： Inverter-applicable

DIMENSIONS

unit : mm
Weight : C-arm cart 250kg
Monitor cart 145kg

Remarks
* Every value in this Product Data Sheet is a standard value, and it may vary a little from the actual at each site.
* The appearances and specifications are subject to change for reasons of improvement without notice.
* Certain configurations may not be available pending regulatory clearance. Contact your Shimadzu
representative for information on specific configurations.

SHIMADZU CORPORATION. International Marketing Division

3. Kanda-Nishikicho 1-chome, Chiyoda-ku, Tokyo 101-8448, Japan Phone: 81(3)3219-5641 Fax: 81(3)3219-5710 Shimadzu Corporation Medical Systems Group has
Cable Add.: SHIMADZU TOKYO been certified by TUV Rheinland as a manufacturer
of medical equipment and systems in compliance
URL http://www.shimadzu.com with ISO9001: 2000 Quality Management Systems
and EN ISO13485: 2000 Medical Equipment
Quality Management Systems.