Dutchclamp SE

Dutchclamp®
Cable clamps - Cable blocks
Torque
5 Nm SE TYPES
SE Type 15 - 26
Dutchclamp® SE cable clamps are specially designed for short-circuit resistant fastening
of single or multicore medium and high voltage cables. SE types are available in 7 models
5 Nm and suitable for cables with a diameter from 15 mm to 170 mm.
SE Type 26 - 38
Dutchclamp® SE cable clamps are unique in their kind. The surfaces wherein the cables
come to lie ensure perfect pressure distribution and maximum grip on the cables without
5 Nm sharp edges. In this way, there is no point load on the cables and the cables are not
damaged. Dutchclamp SE cable clamps are manufactured from the highest quality, glass
SE Type 36 - 52
fibre reinforced polyamide and are therefore ideally suited for installations where very high
short circuit forces may occur.
5 Nm
SE Type 50 - 75
The unique raw material used in manufacturing these cable clamps, makes them resistant
to corrosion, ozone, frost, heat, oil, acids, salts, aggressive chemicals, UV and nuclear
radiation. There is no reduction in force within temperatures from -40° C to + 125˚C. (225˚C
5 Nm
momentarily).
SE Type 75 - 100
Dutchclamp® SE cable clamps have been tested by, among others, UL (The
Underwriters Laboratories U.S.A), the Prof. Ir. Damstra laboratory (Eaton) Voltalab
8 Nm
Grenoble (Schneider) and SGS Brussels in accordance with the IEC 61914 international
SE Type 100 - 135 standard. All test reports are available upon request.
Dutchclamp® SE cable clamps are used worldwide and are therefore available from
8 Nm
stock. They can also be supplied with appropriate fastening material.
SE Type 135 - 170
Dutchclamp b.v. | Egstraat 1 | 3319 LA Dordrecht | The Netherlands | t +31 78 - 6 211 212 | f +31 78 - 6 211 226 | [email protected] | www.dutchclamp.com
Dutchclamp®
Cable clamps - Cable blocks
Certified in accordance with the IEC 61914

international safety standard
Dutchclamp has been developing and producing
innovative cable clamps and cable blocks for
installation of low, medium and high voltage cables
since 1982. The clamps have been designed in close
collaboration with major energy companies.
Dutchclamp is globally renowned for its quality, service
and reliability. The Dutchclamp cable clamps and cable
blocks are now being successfully used in more than 50
countries around the world. Dimensions in mm N*
Typ cable-ø A B C D E F G H
SE 15 - 26 15 - 26 77 45 50 10 26 - 42 4 17 8 8000
The design
SE 26 - 38 26 - 38 92 60 60 12 33 - 49 7 18 7 12000
By way of the specific unique model, each type of cable SE 36 - 52 36 - 52 105 60 75 12 39 - 55 15 23 8 12000
clamp provides an exact fit for the required short-circuit SE 50 - 75 50 - 75 126 60 95 12 46 - 71 22 30 9 12000
SE 75 - 100 75 - 100 200 80 150 15 70 - 95 32 45 10 20000
resistant installation.
SE 100 - 135 100 - 135 225 85 175 15 85 - 120 43 58 10 20000
SE 135 - 170 135 - 170 260 90 210 15 133 - 169 62 90 28 20000
The raw material *Mechanical resistance to short-circuits in Newton
Dutchclamp cable clamps are produced from high-quality

virgin raw materials, with glass fibre reinforced polyamide ADVANTAGES
as the main ingredient. The Dutchclamp cable clamps are
self extinguishing and halogen free. • Resistant to short-circuit currents • Custom mounting available.
up to 202 kA. • Fastening materials can be
Robustness • Resistant to oils, fats, aggressive supplied to size.
Owing to the unique design combined with the specific chemicals, frost, heat, UV, ozone, • No oxidation / corrosion.
composition of the raw materials, these plastic cable salt, moisture, acids, and nuclear • No sharp angles.
clamps are among the strongest in the world. They are radiation. • Recyclable.
specially designed to withstand the enormous forces • Self-extinguishing UL94, • Lifetime warranty.
that occur during short circuiting and have been tested by Halogen free. • Very simple installation.
various laboratories. • Temperature range from -40 °C to • Available worldwide.
125°C. (225°C momentarily). • Certified in accordance with
Tests • Coloured black. IEC 61914.
The cable clamps have been tested by, among others, UL • No magnetism / conductivity.
(The Underwriters Laboratories U.S.A), Prof. Ir. Damstra
Laboratory (Eaton), Volta laboratory in Grenoble
(Schneider), KEMA and SGS Brussels, in accordance with
the IEC 61914 international standard.

Dutchclamp SE

Uploaded by

Copyright:

Available Formats

Dutchclamp SE

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dutchclamp SE

Uploaded by

Copyright:

Available Formats

Dutchclamp®

Cable clamps - Cable blocks

SE Type 135 - 170

Certified in accordance with the IEC 61914

Dutchclamp cable clamps are produced from high-quality

You might also like