Scribd
Upload
67 views2 pages

Mineral Tanks: Features

Clack Mineral Tanks are made from a high density polyethylene inner liner with a fiberglass outer winding and come in sizes from 8 to 30 inches in diameter. They are suitable for water softening and filtration applications with storage capacities ranging from 6.7 to 189.1 gallons. The tanks have a 10 year warranty for sizes 8 to 13 inches and 5 year warranty for larger sizes, exceed NSF/ANSI standards, and are made in the USA.

Uploaded by

Karina Vitola
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
67 views2 pages

Mineral Tanks: Features

Clack Mineral Tanks are made from a high density polyethylene inner liner with a fiberglass outer winding and come in sizes from 8 to 30 inches in diameter. They are suitable for water softening and filtration applications with storage capacities ranging from 6.7 to 189.1 gallons. The tanks have a 10 year warranty for sizes 8 to 13 inches and 5 year warranty for larger sizes, exceed NSF/ANSI standards, and are made in the USA.

Uploaded by

Karina Vitola
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Mineral Tanks

Clack Mineral Tanks are made of


high density polyethylene (HDPE)
plastic liner with composite fiberglass
filament winding over the liner.
Clack's design provides a continuous
seamless inner liner with a glass filled
polypropylene inlet for higher strength
and pressure capabilities. Residential
and commercial pressure tanks are
available from 8" to 30" diameters.
FEATURES:
• For water softener and filtration
applications
• Capacities from 6.7 to 189.1 gallons
• 10 year warranty for 8" - 13" vessels
• 5 year warranty for 14" - 30" vessels

MATERIAL OF CONSTRUCTION:
• Inner liner high density polyethylene
• Threaded inlet glass filled polypropylene

OPERATING PARAMETERS:
• Maximum operating pressure: 150 psi
• Maximum operating temperature: 120oF

EXCEEDS NSF/ANSI 44 MINIMUM


PERFORMANCE REQUIREMENTS:
• Safety factor: 4:1
• Minimum burst at 600 psi
• Tested to 100,000 cycles/0-150 psi

This product is Tested and Certified by


COLORS AVAILABLE: NSF International against NSF/ANSI 44 for
ALMOND
material and structural integrity requirements
BLACK and NSF/ANSI/CAN Standard 61 for material
BLUE requirements. Certified to NSF/ANSI/CAN 372.
GREY
NATURAL

MADE IN THE USA


MINERAL TANK SPECIFICATIONS:
Tank Opening Height Capacity Capacity Capacity Empty Tank Weight Quantity per
Size Diameter with Base Gallons Liters Cubic Feet With Base Bulk Pack/
(Inches) (Inch/mm) (Inch/mm) (Lbs/Kg) Carton
8x35* 2.5/63.5 34.9/886 6.7 25.5 0.90 8.1/3.7 18
8x44 2.5/63.5 44.2/1123 8.6 32.5 1.15 9.8/4.4 18
9x18* 2.5/63.5 18.4/467 3.9 14.8 .52 5.1/2.3 9
9x35* 2.5/63.5 34.8/884 8.2 31.0 1.09 9.5/4.3 16
9x48 2.5/63.5 48.3/1227 11.5 43.7 1.54 12.5/5.7 16
10x18* 2.5/63.5 18.4/468 4.75 18.0 .64 6.3/2.9 8
10x35* 2.5/63.5 35.0/889 10.2 38.8 1.37 10.4/4.7 16
10x40 2.5/63.5 40.6/1031 12.0 45.5 1.61 11.7/5.3 16
10x44 2.5/63.5 44.3/1125 13.2 50.1 1.77 12.4/5.6 16
10x47 2.5/63.5 47.2/1199 14.2 53.8 1.90 13.1/5.9 16
10x54 2.5/63.5 54.4/1382 16.0 60.6 2.14 15.0/6.8 16
12x35* 2.5/63.5 35.4/900 14.60 55.3 1.95 15.4/7.0 9
12x52 2.5/63.5 52.8/1341 23 86.6 3.1 19.7/8.9 9
13x54 2.5/63.5 55/1397 28 105.4 3.7 22.5/10.2 9
14x65 2.5/63.5 65.6/1666 39.4 149.2 5.27 37.5/17 1
14x65 4/101.6 65.6/1666 39.4 149.2 5.27 37.5/17 1
16x53 2.5/63.5 54/1371 41.0 155.2 5.48 41/18.6 1
16x65 4/101.6 65.6/1666 51.2 193.8 6.85 42.75/19.4 1
18x65 4/101.6 67.7/1720 73.5 278.1 9.83 52.5/23.8 1
21x62 4/101.6 67.8/1722 89.6 339.1 11.98 75.75/34.4 1
24x72 4/101.6 73.6/1869 120 464.1 16.39 98.25/44.6 1
30x72 4/101.6 72.2/1884 189.1 715.8 25.28 116/52.6 1
*Available with or without base.
Note: All data is for reference only and is subject to change without notice.

4462 DURAFORM LANE • WINDSOR, WISCONSIN 53598-9716 USA


www.clackcorp.com phone(608) 846-3010 fax (608) 846-2586 sales /customer service fax (800) 755-3010 Form No. 2902 • 8/26/2021

You might also like