WiFi-over-Coax Entender - Better Coverage and Connection!

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

7-7-2014 WiFi-over-Coax Entender - Better Coverage and Connection!

Home Services Products Where to Buy About

Dualcomm WiFi-over-Coax Entender Kit


Model No. DWOC-5141

Highlights:
DWOC-5141
• A cost-effective Distributed Antenna System (DAS) for delivering WiFi
DANT-01 x 4 signal over shared in-building CATV coax cabling
• Increase of in-building WiFi coverage range by avoiding typical issues
of wireless transmission such as mutli-path interference and loss of
signal strengths blocked by walls and other objects. At leas 25dB less
attenuation than in-air transmissions.
• Improvement of WiFi connection quality to achieve higher data rates
DDUP-01 x 4
• Purely passive. No power is needed
• Lower RF radiations to human bodies and environment

DCBL-01
DMUX-01

[Description]

Dualcomm WiFi-over-Coax (WoC) Extender Kit (Model No. DWOC-5141) enables a Distributed Antenna System (DAS) for delivering WiFi RF signals
over shared CATV coaxial cables inside buildings such as large homes, hotels and apartment complexes. Transmission of WiFi RF signals over a
coax cable offers the benefits of lower signal attenuations (25dB lower) and avoiding multi-path interference and loss of signal strength caused by
walls and other in-building objects, and therefore provides much better WiFi signal coverage range and higher connection speeds with lower RF
radiations to human bodies and the surrounding environment.

[Components]

The DWOC-5141 WiFi-over-Coax Extender Kit includes the following components:

1) 1-to-4 WiFi and CATV Signal Combiner/Splitter (Model No. DMUX-01). Quantity = 1

The WoC Extender Kit includes one unit of 1-to-4 WiFi and CATV Signal Combiner/Splitter (DMUX-01). DMUX-01 receives and combines WiFi input
signal from a WiFi router or access point (AP) and CATV RF signal input, and splits/outputs the combined RF signals 4 ways, each of which is
connectable to a coax cable for transmission of the combined RF signals to the other end of the coax cable.

2) Remote Duplexer (Model No. DDUP-01). Quantity = 4

The WoC Extender Kit includes four units of Remote Duplexers (DDUP-01). DDUP-01 is used to terminate at the other end of the coax cable which is
connected to DMUX-01. DDUP-01 has a SMA-type connector for attaching a detachable WiFi antenna and a F-type connector for connecting to a
television. This unit is designed to be added onto an existing CATV wall plate for easy installation.

3) WiFi Antenna (Model No. DANT-01). Quantity = 4

The WiFi antenna is attachable with an remote Duplexer DDUP-01 to enable wireless connections with the nearby WiFi terminal devices.

4) SMA Jumper Cable (Model No. DCBL-01). Quantity = 1

The SMA jumper cable is needed to connect the DMUX-01 and an WiFi router/AP for receiving the WiFi signals from the WiFi router/AP. As such, The
WiFi router/AP which can be used with the WoC extender Kit DWOC-5141 must have an external WiF antenna connector.

[Application Diagram]

See below.

[Availability and Pricing]

Please email or call for availability and pricing information of this product.

http://www.dual-comm.com/wifi-over-coax-extender.htm 1/2
7-7-2014 WiFi-over-Coax Entender - Better Coverage and Connection!

CATV
Coax Cables

WiFi Router/AP

Distributing and Extending WiFI signals over Coaxial Cables inside a building

Copyright © 2005~2014 DualComm Technology, Inc. All Rights Reserved.

http://www.dual-comm.com/wifi-over-coax-extender.htm 2/2

You might also like