Pump Control Model
Pump Control Model
==================
1. After opening the file, note how the pump station is modelled
with a storage node and a Type4 pump. Bring up the Controls
Editor to view the rules that control the on/off status of the
pump.
2. Also view the hourly DWF time patterns that are assigned to
each node that receives DWF. The base-line DWF was set to 1.0
for these nodes, so the pattern multipliers are the actual flows
in this example.
4. Create a time series plot of water depth at the storage node and
flow in the pump on the same graph. See if the plot reflects the
desired control rules.