DSR 2017-18-1

Report Name: e DSR
Date Of Printing: 05-05-2017
Chapter Item Reference Description of the item Additional Unit State DSR State DSR
No. No. Specification (Completed (Labour Rate In
Rate In Rs. per Rs. per unit)
Road Survey 1.01 MORTH Fixing chainage Stone/B.M. Stone/Center Stone/Apex Stone in As directed by Number 112 112
and DPR earth and all sorts of soil and soft murum including conveying Engineer in charge
excavation fixing stone including paintaining lettering numbers
and back filling etc. complete.
Road Survey 1.02 MORTH Taking the trial pit for roads, alignment, C.D. Works in earth soil As directed by Cubic 245 245
and DPR of all sorts, sands gravel, or soft murum, including stacking the Engineer in charge Meter
excavated material including all lifts and necessary back filling
upto depth 1.5 meters
Road Survey 1.03 MORTH Taking the trial pit for roads, alignment, C.D. Works in earth soil As directed by Cubic 300 300
and DPR of all sorts, sands gravel, or soft murum, including stacking the Engineer in charge Meter
excavated material including all lifts and necessary back filling
upto depth 3.0 meters
Road Survey 1.04 MORTH Taking the trial pit for roads, alignment, C.D. Works in Hard As directed by Cubic 370 370
and DPR murum, including stacking the excavated material including all Engineer in charge Meter
lifts and necessary back filling upto depth 1.5 meters
and DPR murum, including stacking the excavated material including all Engineer in charge Meter
lifts and necessary back filling upto depth 3.0 meters
and DPR murum, and Boulders including stacking the excavated material Engineer in charge Meter
including all lifts and necessary back filling upto depth 1.5 meters
and DPR murum, and Boulders including stacking the excavated material Engineer in charge Meter
including all lifts and necessary back filling upto depth 3.0 meters
Road Survey 1.08 MORTH Fixing survey pegs in earth and all sorts Soil, Sand, Gravel, Soft As directed by Number 1049 5
and DPR Murum, etc. including conveying, fixing etc. complete. Engineer in charge
Road Survey 1.09 MORTH Reconnaisance Survey of Road alignment in plain country As directed by Kilometer 1235 1135
and DPR including taking three dimensions of apexes verification of type Engineer in charge
of land etc. alongwith the alignment etc. complete (Without
Chaining).
Road Survey 1.1 MORTH Reconnaisance Survey of Road alignment in plain country As directed by Kilometer 627 627
and DPR including taking three dimensions of apexes verification of type Engineer in charge
of land etc. alongwith the alignment etc. complete (With
Chaining).
Road Survey 1.11 MORTH Reconnaissance Survey of a road alignment for new hilly road As directed by Kilometer 3290 3060
and DPR utilising exsisting forest cart tracks with use of ghat tracer (if Engineer in charge
found necessary), taking three dimensions of apexes including
verification of type of land etc. complete. (Without Chaining)
Road Survey 1.12 MORTH Reconnaissance Survey of road alignment for new hilly road As directed by Kilometer 759 759
and DPR utilising exsisting forest cart tracks with use of ghat tracer (if Engineer in charge
found necessary), taking three dimensions of apexes including
verification of type of land etc. complete. (With Chaining)
Road Survey 1.13 MORTH Reconnaissance Survey of road alignment in hilly road utilising As directed by Kilometer 1780 1500
and DPR exsisting forest cart tracks with use of ghat tracer (if found Engineer in charge
necessary), taking three dimensions of apexes including
verification of type of land etc. complete. (Without Chaining) .
Road Survey 1.14 MORTH Reconnaissance Survey of road alignment in hilly road utilising As directed by Kilometer 3910 3070
and DPR existing forest cart 1.5 kms with use of ghat tracer (if found Engineer in charge
necessary), taking three dimensions of apexes including
verification of type of land etc. complete. (With Chaining) .
Road Survey 1.15 MORTH Detailed survey of road in plain country including chaining and As directed by Kilometer 1012 1012
and DPR levelling with cross sections at every two chains inclusive of Engineer in charge
closing of survey each day.
Road Survey 1.16 MORTH Detailed survey of road length where earthwork is partly done As directed by Kilometer 380 380
and DPR including chaining and levelling with cross sections at every two Engineer in charge
inclusive of closing survey each day.
Road Survey 1.17 MORTH Detailed survey of road through hilly country taking cross As directed by Kilometer 7120 2625
and DPR section at every chains or as required including chaining , Engineer in charge
levelling and closing survey each day.
Road Survey 1.18 MORTH Detailed survey of road through hilly country taking cross section As directed by Kilometer 5240 2425
and DPR at every chains as per desired including chaining ,levelling and Engineer in charge
closing survey each day utilising existing cart track.
Road Survey 1.19 MORTH Providing and Fixing Wooden survey pegs including White As directed by Number 25 10
and DPR washing etc. complete. Engineer in charge
Road Survey 1.2 MORTH Carrying out catchment area traverse survey of minor stream ( As directed by Kilometer 253 253
and DPR not traceable in toposheet ) below 100 acres Engineer in charge
Road Survey 1.21 MORTH Cutting down branches of trees , bushes etc. stacking the As directed by Kilometer 5340 5340
and DPR material neatly as directed ( For Motarable Road) Engineer in charge
Road Survey 1.22 MORTH Providing detailed layout plan of area in scale 1:500 including As directed by Acre 6220 5037
and DPR carrying out contour survey & detailed Engineering plane table Engineer in charge
Survey with the help of 20''. The dolomite area measurement of
the plot and structures, trees, over head line and under ground
service amenities within the area, with triagular method and
giving detailes of the structures, such as total area, type of
building & distance from all corners taking trial pit 0.5x0.5x2.00
m.-2Nos. per acre and collection of record from city survey /
D.I.L.R. authorities and authentication. The plan shall be traced
on 75 micron polyster film and shall be submitted along with
three Amonia prints. The contour levels shall be marked at 0.5.
Meter intervals. Note:- The items includes- 1)Traversing work
with theodolite and steel tape. 2) Levelling Grid Work of the
terrain. 3)Detailed Engineering Survey and contouring work of
the terrain. 4)Plotting work. 5)Collection of Record. a) up to 1
Acre
Road Survey 1.23 MORTH Providing detailed layout plan of area in scale 1:500 including As directed by Acre 6820 5640
and DPR carrying out contour survey & detailed Engineering plane table Engineer in charge
Survey with the help of 20''. The dolomite area measurement of
the plot and structures, trees, over head line and under ground
service amenities within the area, with triagular method and
giving detailes of the structures, such as total area, type of
building & distance from all corners taking trial pit 0.5x0.5x2.00
m.-2Nos. per acre and collection of record from city survey /
D.I.L.R. authorities and authentication. The plan shall be traced
on 75 micron polyster film and shall be submitted along with
three Amonia prints. The contour levels shall be marked at 0.5.
Meter intervals. Note:- The items includes- 1)Traversing work
with theodolite and steel tape. 2) Levelling Grid Work of the
terrain. 3)Detailed Engineering Survey and contouring work of
the terrain. 4)Plotting work. 5)Collection of Record. b) Above
Acre
Road Survey 1.24 MORTH Reconnaisance survey including study of sheets,maps etc. for As directed by Kilometer 5148 1620
and DPR alignment including 3 dimension of appexes, fixing pegs,chain Engineer in charge
and compass or cross staff survey with L-Section and cross
section of alignment at every 30 m or at every change of
indiviation which ever is less including fly levels at close of
days,fixing apex and B.M. stones of size 0.20*0.20*0.75 m in
1:2:4 C.C. at every 200 m and preparation of alignment plans and
all type of compliance if required from department.
Road Survey 1.25 MORTH Preparation of detailed Plans and Estimates Of road including As directed by Kilometer 10470 2460
and DPR typing in 5 copies, ammonia prints, with colouring of plans, Engineer in charge
proper filing, indexing and paging etc. complete and all types of
compliance, if required from Department.
Road Survey 1.26 MORTH Survey of C.D. works including taking L-section of Road, As directed by Number 7250 1050
and DPR catchment area plan by Traverse method and taking and trial pits Engineer in charge
of size 1.00 Mx1.00Mx1.50M including preparation of detailed
Plans and Estimates in 5 copies and all types of compliance if
required from the Department.
Road Survey 1.27 MORTH Survey of Minor bridge including taking L section of existing road As directed by Number 25070 21067
and DPR two defined cross sections one of U/s and one of D/s one vergin Engineer in charge
cross section on allernate proposed cross section and stream
upto sufficient long with chain and compass taking three trial pits
of size 1.00 x 1.00x3.0 m collecting samples of bed materials at
size for ascertaining the silt factor unit test specific gravity from
Govt. approved labouratories and preparation of detailed survey
data submission of the porject duly typed colouring of the
ammonia prints site pland and other drawing etc. complete if
required form the Dpartment.
Road Survey 1.28 MORTH Survey of major bridge including taking L-section of existing road As directed by Running 1343 846
and DPR two defined (one at U/S and one at D/s)one alternate proposed Engineer in charge Meter
cross section stream upto sufficient length with chain and
compass taking 5 trial pits three in bed two on banks of size
2.00x2.00x3.00m.for collecting samples at site for ascertaining
the laboratories ( testing charges to be borne by the agency) and
preparation of detailed survey data,submission of the project
duly typed colouring of ammonia prints,site plan and other
drawings etc.complete and all types of compliance if required
from Department (Excluding taking trial bores and contouring)
Road Survey 1.29 MORTH Contour Survey of stream U/S and D/S of proposed bridge site As directed by Sq.Km. 76770 48005
and DPR including levelling at every 30 X 30 m preparing contour map Engineer in charge
with Autocad prints etc.complete in 5 sets.
Road Survey 1.3 MORTH Survey of raised Causeway including reconnaissance taking L As directed by Number 35480 16158
and DPR section of existing road one defined one vergin one alternate Engineer in charge
proposed cross section and stream upto sufficient lengths with
chain and compass taking two trial pits of size
2.00x2.00x3.00m.collecting samples at site ascertaining silt factor
and preparation of detailed survey data,submission of the project
duly typed colouring of the ammonia prints,site plan and other
drawing etc.complete if required from Deparetment.
Road Survey 1.31 MORTH Preparation of detailed plans and estimates of Raise Causewayon As directed by Number 7760 2800
and DPR the basis of the approved detailed survey data by competent Engineer in charge
authority including typing in 5 copies ammonia prints site plan
other drawings with colouring of plans proper filling indexing and
paging etc.complete and all types of compliance if required from
Department.
Road Survey 1.32 MORTH Complete survey of stream having catchment area upto 1 sq. As directed by Number 506 506
and DPR mile including catchment survey taking necessary L.S./C.S. and Engineer in charge
other details etc. complete.
Road Survey 1.33 MORTH Complete survey of stream having catchment area above 1 sq. As directed by Number 2222 2222
and DPR Mile and upto 5 sq. Miles including taking necessary L.S./C.S. and Engineer in charge
other details etc. complete.
Road Survey 1.34 MORTH Reconnaissance survey of alignment in plain country for As directed by Kilometer 1188 1188
and DPR approaches to the bridge including taking three dimensions of Engineer in charge
apexes. ( Without chaining )
Road Survey 1.35 MORTH Fly levelling for carrying out bench mark. As directed by Kilometer 680 244
and DPR Engineer in charge
Road Survey 1.36 MORTH Detailed survey of approaches including Chain and Compass As directed by Kilometer 2430 2100
and DPR survey along bridge alignment and approaches including closing Engineer in charge
each day work.
Road Survey 1.37 MORTH Taking longitudinal section of streams extending upstream and As directed by Kilometer 3000 2600
and DPR downstream side of the bridge site, requisite number of cross Engineer in charge
section of the stream on either sides block contouring and other
details etc. complete. ( Length of L.S. and C.S. for contouring to
be worked out )
Road Survey 1.38 MORTH Demarcation of right of way (ROW) as per design using total As directed by Kilometer 7200 3750
and DPR station including calculation of co-ordinates of 30 Meter interval Engineer in charge
on both sides of road.
Road Survey 1.39 MORTH Preparation of Land Acquisition proposal including collection of As directed by Kilometer 8800 5533
and DPR 7/12 and 8/A documents marking alignment and village maps , Engineer in charge
area calculation, preparation of proposal, printing,binding, etc.
complete and submission of 5 sets more ever liasoning and
coordination with revenue authorities with compliance if any
until finalisation of award including Joint measurement of the
alignment. For new alignment.
Road Survey 1.04 MORTH Preparation of Land Acquisition proposal including collection of As directed by Kilometer 16258 7126
and DPR 7/12 and 8/A documents marking alignment and village maps , Engineer in charge
area calculation, preparation of proposal, printing,bindind, etc.
complete and submission of 5 sets more ever liasoning and
coordination with revenue authorities with compliance if any
until finalisation of award including Joint measurement of the
alignment. For existing alignment.
Road Survey 1.41 MORTH Carrying of detailed topographic survey by using total station As directed by Kilometer 16000 12870
and DPR along the existing or new road including taking L-section and Engineer in charge
cross section at every 30 meter Row ,taking at least 10 spot levels
per cross section, picking up all existing details inside the Row
like electric telephone line , encroachments, structures etc.
connecting all the primary total station control points by
G.I.S.Bench marks level or whichever available with department
using auto level and preparing Auto CAD plan by using above
data taking out 1 set of black and white printout on 50 micron
polyster film sheet A2 size and 2 sets of coloured printout on A2
size submitting soft copy all data on CD. Plain Terrain New
Alignment
Road Survey 1.42 MORTH Carrying of detailed topographic survey by using total station As directed by Kilometer 17130 14275
size submitting soft copy all data on CD. Plain Terrain Existing
Alignment.
Road Survey 1.43 MORTH cCarrying of detailed topographic survey by using total station As directed by Kilometer 21490 19775
size submitting soft copy all data on CD. Hilly Terrain New
Alignment
Road Survey 1.44 MORTH Demarcation of Road boundry (ROW) including fixing the As directed by Kilometer 35695 10680
and DPR boundry stones at standard size and shape including fixing in Engineer in charge
block of standard size of C.C. of 1:4:8 white washing at 30 M
interval on both sides
Road Survey 1.45 MORTH Taking trial bores 75 to 100 mm for 53.0 to 88.9 mm core dia As directed by Running 1450 225
and DPR over burden ( by diamond drilling machine ) such as soil of all Engineer in charge Meter
sorts, soft murum,hard murum and boulders and in soft rock
including all materials such as casing pipes and accessories oil,
grease, steel, rods, and such other materials as required
(including conveying the material to site of work) . Preserving the
loose sample in glass jar and core sample serially on site of work
and conveying the same to HQ of concernring office as directed.
R.A.for 10.00 Rmt a) over burden 0 to 50 meter.
Road Survey 1.46 MORTH Taking trial bores 75 to 100 mm for 53.0 to 88.9 mm core dia in As directed by Running 2904 270
and DPR rocks as specified below including all necessary materials such as Engineer in charge Meter
oil,grease,steel boostan and such other materials as required
(including conveying the material to site of work) and Preserving
the core sample core sample serially on site of work and
conveying the same to HQ of concernring office as directed.
Quartzite with diamond drill with Nx Bit 0 to 50 metre
Quartzite with diamond drill with Ax Bit 0 to 50 metre
Other Rock with diamond drill. 0 to 50 metre
Road Survey 1.49 MORTH Providing tun tappa core boxes of jungle wood of size1.25mx As directed by Number 1980 410
and DPR 0.35x 0.15m for preserving core sample with all fixtures and Engineer in charge
fastening handles including locking arrangment etc . complete.
Road Survey 1.5 MORTH Providing and maintaining temparory platform of bore location in As directed by Number 10320 1743
and DPR river bed in upto 1M of standing water of size 3.50 x 4.00 M by Engineer in charge
using sand bags in layer for platform including all required
materials labours etc. complete.
Road Survey 1.51 MORTH Providing and maintaining temporary platform for erecting As directed by Number 15150 4720
and DPR boring machined in river bed to the depth of standing water 1M Engineer in charge
to 2M of size 3.50 x 4.00 M by using 20 Nos. of M.S. empty
barrels in M.S. frame made upto M.S. angle size 50 x 50 x 5 mm
with fabrication and over it a jungle wood planks platform of size
3.50 x 4.00 x 0.03 M size including supplying of nylon rope 24 mm
size for anchoring platform include passage platform and
enganging a labour etc. complete. 1 M to 2 M.
Road Survey 1.52 MORTH Providing and maintaining temparory platform for erecting As directed by Number 16280 4720
and DPR boring machined in river bed to the depth of standing water 1M Engineer in charge
to 2M of size 3.50 x 4.00 M by using 20 Nos. of M.S. empty
barrels in M.S. frame made upto M.S. angle size 50 x 50 x 5 mm
with fabrication and over it a jungle wood planks platform of size
3.50 x 4.00 x 0.03 M size including supplying of nylon rope 24 mm
size for anchoring platform include passage platform and
enganging a labour etc. complete. 2 M and Above.
Road Survey 1.53 MORTH Providing and maintaining temparory platform for inspection As directed by Number 13835 6735
and DPR from one bank to another bank of bore location in river bed in all Engineer in charge
depth of standing water of size 1.30 x 2.00 M by using 4 Nos. of
M.S. empty barrels in M.S. frame made up of M.S. angle size 50 x
50 x 5 mm with fabrication and over it a jungle wood planks
platform of size 1.30 x 2.00 x 0.03 M size including supplying of
nylon rope 24 mm size and 300 M length of movement of
platform enganging a labour on inspection days etc. complete.
Road Survey 1.54 MORTH Conveying the boring machine and engine and all its accessories As directed by Kilometer 67 10
and DPR etc. to the site of the work and back including loading unloading Engineer in charge
etc. complete. Rate mechanical ( Note - Distance to be measured
from the station of boring machine engine etc. of district head
quarters to site of the work by short route ).
Road Survey 1.55 MORTH Shifting boring plant with all its components and reinstalling the As directed by Shift 2354 1980
and DPR same at the directed place including all its charges etc. complete. Engineer in charge
Road Survey 1.56 MORTH Providing detailed reports of the inspection logging of drilled hole As directed by Number 6900 NA
and DPR by observing visual description of data as per depth, thickness of Engineer in charge
layer, type of sample, wash sample, bore recovery type of drill
etc. complete.
Road Survey 1.57 MORTH Providing detailed geological reports of proposed site by As directed by Report 950 NA
and DPR maintaining geotechnical investigation of structure stratification Engineer in charge
collecting soil, rock and ground water samples for laboratory
tests to arrive the foundation design parameters . Rock
properties such as type of rock, jointing fractures, etc. complete
with suggestion about the site foundation and remedies.
Road Survey 1.58 MORTH Preparing land plans and land schedule including carrying out As directed by Kilometer 31590 10480
and DPR plane table survey for Private / Forest land on both side of road in Engineer in charge
Rural and Urban areas. The work of plotting and certificate from
T.I.L.R. or other authorities shall be obtained from correctness of
prepared plans. Tracing ang taking out prints and preparing the
requisite booklets duly bounds and printing with all materials etc.
Three land plan booklets along with original tracing shall be
supplied including procurement of village maps / forest land
plans from concern authorities.Note : The item plane table
includes following points 1 ) Carrying out plane table survey. 2)
Plotting of duly surveyed area . 3) Collection of data from
D.I.L.R. authorities and verification of survey maps by D.I.L.R.
authorities . 4) Preparing three booklets of survey maps including
taking out prints of survey maps, binding etc. 5) Carrying out
plane table survey of the Private / Forest land along the road
upto 30 meters on either side from the road centre.
Road Survey 1.59 MORTH Geometrical design of road horizontal and vertical curves at As directed by Kilometer 9980 3760
and DPR design speed specified by IRC including carrying out trail for Engineer in charge
optimising of civil cost minimising land acquisition and maximum
use of existing facility and preparation of widening arrangement
drawing for insisting structures stake out date for horizontal
alignment and working levels including super elevation effect etc.
complete.
Road Survey 1.6 MORTH Transfering and taking out design on coordinates of baseline on As directed by Kilometer 10420 4810
and DPR ground using nails for exsisting road surfaces and survey pegs for Engineer in charge
new alignments including taking out coordinates for horizontal
curves at required interval of 50 meters etc. complete. ( Extra
line such as right of way median edges to toe line not included).
Road Survey 1.61 MORTH Preparation of roadway, drawing (Plan And Profile ) on As directed by Kilometer 6060 4960
and DPR computerising Autocad at required scale showing all topo feature Engineer in charge
and proposed construction details such as carriage way , median
service road, toe line, retaining walls, cross drainage works,
major structures, etc. complete. Including indexing, level tables,
legend, basic information of project and design details etc.
Road Survey 1.62 MORTH Preparation of Engineering drawing as strip plan, widening As directed by Kilometer 6830 5700
and DPR scheme, index / key map, typical cross section, retaining walls, Engineer in charge
road furniture, general arrangement drawings for bus bays /
truck lay-bays / rest areas / toll plaza / booths / and type drawing
of pipe/ slab drains etc. on computer using Auto CAD.
Road Survey 1.63 MORTH Survey of C.D. works including taking L-Section of road, As directed by Number 6060 3840
and DPR catchment area plan by Traverse method and taking trial pits of Engineer in charge
size 1.50M x 1.50M x 1.50M including preparation of detailed
plans and estimates in 5 copies and all types of compliance if
required from the department.
Road Survey 1.64 MORTH Design of junctions including detail layout of traffic signs, As directed by Kilometer 21590 15090
and DPR informatory boards traffic islands. Breaks in median verge Engineer in charge
including working levels at junctions as per IRC standards etc.
complete. a) Major Junction
Road Survey 1.65 MORTH Design of junctions including detail layout of traffic signs, As directed by Kilometer 10790 7540
and DPR informatory boards traffic islands. Breaks in median verge Engineer in charge
including working levels at junctions as per IRC standards etc.
complete. b) Minor Junction
Road Survey 1.66 MORTH Preparaion of initial design of flyovers with preparing General As directed by Kilometer 640 104
and DPR Arrangement drawing with dimensions etc. complete and Engineer in charge
preparation of rough estimate for all components of bridge.
Including supplying four copies of coloured drawings and copy of
drawing on C.D. ( excluding geotechnical and structural design
part.)
Road Survey 1.67 MORTH Preparation of draft / Final Report comprising of technical, As directed by Kilometer 227800 157440
and DPR financial economic feasibility and environmental aspects of the Engineer in charge
project including executive summary and detailed chapters on
necessity and introduction of project existing and future traffic,
design philosophy scope of work, summary of available cost
estimates justification for rates adopted, key points of execution,
salient features of the project, location of toll plaza, toll rate /
policy to be adopted and specification of major construction
items etc. in 8 copies having attractive cover and binding s
directed by engineer in charge etc. complete.
Road Survey 1.68 MORTH Preparation of Autocad drawing with colour print for Building / As directed by Number 1650 NA
and DPR Bridge / Road/ CD Works in required size etc. complete. - A-0 Size Engineer in charge
and DPR Bridge / Road/ CD Works in required size etc. complete. A-1 Size Engineer in charge
and DPR Bridge / Road/ CD Works in required size etc. complete. A-2 Size Engineer in charge
Road Survey 1.71 MORTH Autocad drawing with colour print out for Building / Bridge / As directed by Number 150 NA
and DPR Road/ CD Works in required size etc. complete. A-0 Size Engineer in charge
Road Survey 1.76 MORTH Deploying Automated Traffic Count & classification system on As directed by Day 28560 6435
and DPR Road ( Two Lane) in both direction at designated traffic count Engineer in charge
post by using High Definition Cameras..Collecting the Non
Editable Data In DVR System with necessary electronic and
electrical arrangements or inventor of required capacity
Classification of data as per vehicle category as required with the
help of software and submitting the the reports to the concerned
department in hard copies as well as in soft copy, including using
necessary technical manpower etc. complete. A) Up to 7 Days
(Two Lane)
Road Survey 1.77 MORTH Deploying Automated Traffic Count & classification system on As directed by Day 8612 687
and DPR Road ( One Lane) in both direction at designated traffic count Engineer in charge
post by using High Definition Cameras..Collecting the Non
Editable Data In DVR System with necessary electronic and
electrical arrangements or inventor of required capacity
Classification of data as per vehicle category as required with the
help of software and submitting the the reports to the concerned
department in hard copies as well as in soft copy, including using
necessary technical manpower etc. complete. B) Extra charges
for every additional lane (If required)
Report Name: e DSR
No. No. Specification (Completed Rate (Labour Rate In
In Rs. per unit) Rs. per unit)
Road Sub 2.01 MORTH Cutting down trees including trunks and branches with girths above MORTH 201 Number 141 100
grade 201 30cm to 60cm and stacking the materials neatly with all lifts and lead of
1000m. as directed and earth filling in the depression/pit if any.
grade 201 180cm to 270cm and stacking the materials neatly with all lifts and lead
of 1000m. as directed and earth filling in the depression/pit if any.
Road Sub 2.05 MORTH Cutting down trees including trunks and branches with girths above MORTH 201 Number NA NA
grade 201 270cm to 450cm and stacking the materials neatly with all lifts and lead
of 1000m. as directed and earth filling in the depression/pit if any.
Road Sub 2.06 MORTH Cutting down trees including trunks and branches with girths above MORTH 201 Number NA NA
grade 201 450cm and stacking the materials neatly with all lifts and lead of 1000m.
as directed and earth filling in the depression/pit if any.
Road Sub 2.07 MORTH Clearing grass and removal of rubbish up to a distance of 50 metres MORTH 201 Square 4 4
grade 201 outside the periphery of the area . Meter
Road Sub 2.08 MORTH Clearing and grubbing road land including uprooting rank vegetation, MORTH 201 Square NA NA
grade 201 grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of Meter
stumps of trees cut earlier and disposal of unserviceable materials and
stacking of serviceable material to be used or auctioned up to a lead of
1000 metres including removal and disposal of top organic soil not
exceeding 150 mm in thickness. BY Manual Means
Road Sub 2.09 MORTH Clearing and grubbing road land including uprooting rank vegetation, MORTH 201 Square NA NA
grade 201 grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of Meter
stumps of trees cut earlier and disposal of unserviceable materials and
stacking of serviceable material to be used or auctioned up to a lead of
1000 metres including removal and disposal of top organic soil not
exceeding 150 mm in thickness. By Mechanical Means
Road Sub 2.1 MORTH Excavation for roadway in earth, soil of all sorts, sand, gravel or soft MORTH 301 Cubic 83 83
grade 301 murum including dressing section to the required grade, camber and side Meter
slopes and conveying the excavated materials with all lifts upto a lead of
50m. and spreading for embankment or stacking as directed. By Manual
Means
Road Sub 2.11 MORTH Excavation for roadway in earth, soil of all sorts, sand, gravel or soft MORTH 301 Cubic 51 5
grade 301 murum including dressing section to the required grade, camber and side Meter
50m. and spreading for embankment or stacking as directed. By
Mechanical Means.
Road Sub 2.12 MORTH Excavation for roadway in hard murum including dressing section to the MORTH 301 Cubic 93 93
grade 301 required grade, camber and side slopes and conveying the excavated Meter
materials with all lifts upto a lead of 50m.and spreading for embankment
or stacking as directed. By Manual Means
Road Sub 2.13 MORTH Excavation for roadway in hard murum including dressing section to the MORTH 301 Cubic 63 6
materials with all lifts upto a lead of 50m.and spreading for embankment
or stacking as directed. By Mechanical Means.
Road Sub 2.14 MORTH Excavation for roadway in soft rock, including dressing section to the MORTH 301 Cubic 160 160
materials with all lifts upto a lead of 50m. and spreading or stacking as
directed. By mechanical means
Road Sub 2.15 MORTH Excavation for roadway in hard rock by controlled blasting including MORTH 301 Cubic 330 122
grade 301 dressing section to the required grade, camber and side slopes and Meter
conveying the excavated materials with all lifts upto a lead of 50m. and
spreading for embankment or stocking as directed.
Road Sub 2.16 MORTH Excavation for roadway in hard rock by wedging & chiselling or line MORTH 301 Cubic 360 316
grade 301 drilling including dressing section to the required grade, camber and side Meter
50m. and spreading for embankment or stacking as directed.
Road Sub 2.17 MORTH Excavation for catch / side water gutter in all sorts of soils to the MORTH 309 Cubic 90 90
grade 309 specified section including stacking the excavated stuff in a regular bund Meter
and disposing of unsuitable or excess stuff as directed By Manual Means.
Road Sub 2.18 MORTH Excavation for catch / side water gutter in all sorts of soils to the MORTH 309 Cubic 63 7
and disposing of unsuitable or excess stuff as directed all sorts of soils. By
Mechanical Means
Road Sub 2.19 MORTH Excavation for catch / side water gutter in Hard murum strata to the MORTH 309 Cubic 100 100
and disposing of unsuitable or excess stuff as directed. By Manual
Means.
Road Sub 2.2 MORTH Excavation for catch / side water gutter in Hard murum strata to the MORTH 309 Cubic 74 13
and disposing of unsuitable or excess stuff as directed.By Mechanical
Means
Road Sub 2.21 MORTH Excavation for catch / side water gutter in Soft rock strata to the MORTH 309 Cubic 187 165
and disposing of unsuitable or excess stuff as directed. by Mechanical
Means
Road Sub 2.22 MORTH Excavation for catch / side water gutters in Hard rock strata to the MORTH 309 Cubic 453 377
by chiselling and wedging and disposing of unsuitable or excess stuff as
directed.
Road Sub 2.23 MORTH Watering & compacting of embankment formed of materials obtained MORTH 305 Cubic 42 11
grade 305 from the road cutting within a lead of 50 m, not less than 97 % of Meter
standard Proctor density after laying them in layers of 20 cm. to 30 cm.
with vibratory roller.
Road Sub 2.24 MORTH Watering & compacting of embankment formed of materials obtained MORTH 305 Cubic 70 25
grade 305 from the road cutting within a lead of 50 m, not less than 97% of Meter
standard Proctor density after laying them in layers of 20 cm. to 30 cm.
with Power roller.
Road Sub 2.25 MORTH Conveying materials obtained from road cutting including all lifts, laying MORTH 305 Cubic 77 5
grade 305 in layers of 20cm to 30cm. breaking clods, dressing to the required lines, Meter
curves, grades and section, watering and compacting to not less than
97% of standard Proctor density for a lead of over 50m. to 300m.
inclusive from the site of excavation to the site of deposition as directed.
Road Sub 2.26 MORTH Conveying materials obtained from road cutting including all lifts, laying MORTH 305 Cubic 225 28
grade 305 in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, Meter
curves, grades and section, watering and compacting to not less than
97% of standard proctor density for a lead of 300m. to 500m. inclusive,
from the site of excavation to the site of deposition as directed.
Road Sub 2.27 MORTH Providing earth work in embankment with approved materials obtained MORTH 305 Cubic 67 14
grade 305 from departmental land or other sources upto lead of 50m. including all Meter
lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing
to the required lines, curves, grades & section, watering and compaction
with Power roller to achieve not less than 97 % of standard proctor
density etc. complete
Road Sub 2.28 MORTH Providing earth work in embankment with approved materials obtained MORTH 305 Cubic 350 130
grade 305 from departmental land or other sources upto lead of 50m. including all Meter
lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing
to the required lines, curves, grades & section, watering and compaction
with vibratory roller with V-Sat attachment to achieve not less than 97 %
of standard proctor density etc. complete
Road Sub 2.29 MORTH Supplying hard murum/ kankar at the road site, including conveying and MORTH 408 Cubic 91 60
grade 408 stacking complete. Meter
Road Sub 2.3 MORTH Spreading hard murum for side width etc. complete MORTH 408 Cubic 21 21
grade 408 Meter
Road Sub 2.31 MORTH Compacting the hard murum side widths including laying in layers on MORTH 408 Square 4 2
grade 408 each side with power roller including artificial watering etc. complete. Meter
Road Sub 2.32 MORTH Picking the road surface including sectioning etc. complete (WBM MORTH 404 Square 1 1
grade 404 surface.) Meter
Road Sub 2.33 MORTH Picking the road surface including sectioning etc. complete (BT surface.) MORTH 501 Square 14 13
grade 501 Meter
Road Sub 2.34 MORTH Providing dry rubble stone pitching 23 cm (about 9 ) thick including all MORTH 2504 Cubic 114 83
grade 2504 material, quarry spalls, labour etc. complete.( lead to be considered Meter
seperately )"
Road Sub 2.35 MORTH Providing, laying and spreading soil on a prepared sub grade, pulverizing, MORTH 402 Cubic 552 11
grade 402 mixing the spread soil in place with rotavator with 3 per cent slaked lime Meter
with minimum content of 70 per cent of CaO, grading with motor grader
and compacting with the road roller at OMC to achieve at least 98 per
cent of the max dry density to form a layer of sub base.
Road Sub 2.36 MORTH Providing, laying and spreading soil on a prepared sub grade, pulverizing, MORTH 402 Cubic 695 14
grade 402 adding the designed quantity of cement to the spread soil, mixing in Meter
place with rotavator, grading with the motor grader and compacting with
the road roller at OMC to achieve the desired unconfined compressive
strength and to form a layer of sub-base/base.
Road Sub 2.37 MORTH Laying and spreading available soil in the sub-grade on a prepared MORTH 402 Cubic NA NA
grade 402 surface, pulverizing, mixing the spread soil in place with rotavator with 3 Meter
per cent slaked lime having minimum content of 70 per cent of CaO,
grading with motor grader and compacting with the road roller at OMC
to the desired density to form a layer of improved sub grade -- By
Mechanical Means
Road Sub 2.38 MORTH Laying and spreading available soil in the sub-grade on a prepared MORTH 402 Cubic 539 14
grade 402 surface, pulverizing, mixing the spread soil in place with rotavator with 3 Meter
per cent slaked lime having minimum content of 70 per cent of CaO,
grading with motor grader and compacting with the road roller at OMC
to the desired density to form a layer of improved sub grade -- By Manual
Means
Road Sub 2.39 MORTH Construction of embankment with Flyash conforming to table 1 of IRC: MORTH 403 Cubic NA NA
grade 403 SP: 58 - 2001 obtained from coal or lignite burning thermal power Meter
stations as waste material, spread and compacted in layer of 200mm
thickness each at OMC, all as specified in IRC: SP: 58-2001 and as per
approved plans.
Road Sub 2.01 MORTH Construction of granular sub-base by providing close graded Material, MORTH 401 Cubic 975 13
grade 401 mixing in a mechanical mix plant at OMC, carriage of mixed Material to Meter
work site, spreading in uniform layers with motor grader on prepared
surface and compacting with vibratory power roller to achieve the
desired density, complete as per clause 401 -- Plant Mix Method and
Grading - I Material
desired density, complete as per clause 401 -- Plant Mix Method and
Grading - II Material
desired density, complete as per clause 401-- Plant Mix Method and
Grading - III Material
Road Sub 2.04 MORTH Construction of granular sub-base by providing close graded material, MORTH 401 Cubic 734 13
grade 401 spreading in uniform layers with motor grader on prepared surface, Meter
mixing by mix in place method with rotavator at OMC, and compacting
with vibratory roller to achieve the desired density, complete as per
clause 401 -- By Mix in Place Method and Grading - I Material
clause 401 -- By Mix in Place Method and Grading - II Material
clause 401 -- By Mix in Place Method and Grading - III Material
Road Sub 2.07 MORTH Lime, Fly ash Stabilized Soil Sub-Base -- Construction of Sub-base using MORTH 403 Cubic 648 6
grade 403 lime - Fly ash admixture with granular soil, free from organic matter/ Meter
deleterious material or clayey silts and low plasticity clays having PI
between 5 and 20 and liquid limit less than 25 and commercial dry lime,
slaked at site or pre-slaked with CaO content not less than 50 per cent,
Fly ash to conform to gradation as per clause 4.3 of IRC: 88-1984, lime +
Fly ash content ranging between 10 to 30 per cent, the minimum un-
confined compressive strength and CBR value after 28 days curing and 4
days soaking to be 7.5kg/sq, cm and 25 per cent respectively, all as
specified in IRC: 88-1984.
Road Sub 2.08 MORTH Cement Treated Crushed Rock or combination as per clause 403.2 and MORTH 403 Cubic 1378 15
grade 403 table 400.4 in Sub base/ Base --Providing, laying and spreading Material Meter
on a prepared sub grade, adding the designed quantity of cement to the
spread Material, mixing in place with rotavator, grading with the motor
grader and compacting with the road roller at OMC to achieve the
desired unconfined compressive strength and to form a layer of sub-
base/base course
Road Sub 2.09 MORTH Scarifying the existing granular road surface to a depth of 50 mm by MORTH Square 25 15
grade 501.8.2.1 manual means and disposal of scarified material within all lifts and leads 501.8.2.1 Meter
upto 1000 metres.
Road Sub 2.1 MORTH Dismantling of flexible pavements and disposal of dismantled materials MORTH 202 Cubic 491 318
grade 202 up to a lead of 1000 metres, stacking serviceable and unserviceable Meter
materials separately. By Mechanical Means etc. complete.
Road Sub 2.11 MORTH Dismantling of cement concrete pavement by mechanical means using MORTH 202 Cubic 1691 400
grade 202 pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume Meter
and stock piling at designated locations and disposal of dismantled
materials up to a lead of 1000 metres, stacking serviceable and
unserviceable materials separately etc. complete.
Road Sub 2.12 MORTH Making 50 mm x 25 mm furrows, 45 degree to the center line of the road MORTH Running 9 6
grade 309.3.7 and at one metre interval in the existing thin bituminous wearing coarse 309.3.7 Meter
including sweeping and disposal of excavated material within 1000
metres lead
Road Sub 2.13 MORTH Making 50 mm x 50 mm furrows, 45 degree to the center line of the road MORTH Running NA NA
grade 309.3.7 and at one metre interval in the existing thin bituminous wearing coarse 309.3.7 Meter
including sweeping and disposal of excavated material within 1000
metres lead
Road Sub 2.14 MORTH Brooming the W.B.M. surface by wire Brushes, coir brushers, dusting, MORTH 404 Square 8 8
grade 404 cleaning etc. for receiving the bituminous treatment complete. Brooming Meter
the water Bound Macadam surface by wire.
Road Sub 2.15 MORTH Providing, laying, spreading and compacting stone aggregates of specific MORTH 404 Cubic 1100 221
grade 404 sizes to water bound macadam specification including spreading in Meter
uniform thickness, hand packing, to proper grade and camber, applying
and brooming requisite type of screening/ binding Materials to fill up the
interstices of coarse aggregate, watering and compacting with Intelligent
Compactor with compaction analyzer and V-Sat attachment. to the
required density. By Manual Means - Grading I (Using Screening Type A
(13.2 mm) Aggregate)
uniform thickness, hand packing to proper grade and camber, applying
required density. By Manual Means -Grading I (Using Screening Type B
Compactor with compaction analyzer and V-Sat attachment.to the
required density. By Manual Means - Grading II (Using Screening Type B
required density. By Mechanical Means - Grading I (Using Screening
Type A (13.2) mm Aggregate)
interstices of coarse aggregate, watering and compacting ?with
Intelligent Compactor with compaction analyzer and V-Sat attachment.to
the required density. By Mechanical Means -Grading I (Using Screening
Type B (11.2 mm) Aggregate)
required density. By Mechanical Means - Grading II (Using Screening
Type B (11.2 mm) Aggregate)
Road Sub 2.21 MORTH Crushed Cement Concrete Sub-base / Base - Breaking and crushing of MORTH 405 Cubic 240 88
grade 405 material obtained by breaking damaged cement concrete slabs to size Meter
range not exceeding 75 mm as specified in table 400.7 transporting the
aggregates obtained from breaking of cement concrete slabs at a lead of
1 km., laying and compacting the same as sub base/ base course,
constructed as WBM to clause 404 except the use of screening or binding
material.
Road Sub 2.22 MORTH Penetration Coat Over Top Layer of Crushed Cement Concrete Base -- MORTH 502 Square 11 1
grade 502 Spraying of bitumen over cleaned dry surface of crushed cement Meter
concrete base at the rate of 25 kg per 10 sqm by a bitumen pressure
distributor, spreading of key aggregates at the rate of 0.13 cum per 10
sqm by a mechanical gritter and rolling the surface as per clause 506.3.8
Road Sub 2.23 MORTH Wet Mix Macadam -- Providing, laying, spreading and compacting graded MORTH 406 Cubic 997 20
grade 406 stone aggregate to wet mix macadam specification including premixing Meter
the Material with water at OMC in mechanical mix plant carriage of
mixed Material by tipper to site, laying in uniform layers with paver in
sub- base / base course on well prepared surface and compacting with
vibratory roller to achieve the desired density.
Road Sub 2.24 MORTH Crusher Run Macadam Base -- Providing crushed stone aggregate, MORTH 407 Cubic 736 11
grade 407 depositing on a prepared surface by hauling vehicles, spreading and Meter
mixing with a motor grader, watering and compacting with a vibratory
roller to clause 410 to form a layer of sub-base/Base -- By Mix in Place
Method for 53 mm maximum size
roller to clause 410 to form a layer of sub-base/Base -- By Mix in Place
roller to clause 410 to form a layer of sub-base/Base -- By Mixing Plant
roller to clause 410 to form a layer of sub-base/Base -- By Mixing Plant
Road Sub 2.28 MORTH Dismantling of existing B.T. Surface (flexible Pavement) to a depth of 50 MORTH 202 Square 6 1
grade 202 mm.by cold milling with Writgen or similar type machine including Meter
loading of dismantled material by automatic conveyor belt to transport
vehicle at site excluding lead charges
Road Sub 2.29 MORTH Prime coat - Providing and applying primer coat with bitumen emulsion MORTH 502 Square 21 0.2
grade 502 on prepared surface of granular Base including cleaning of road surface Meter
and spraying, primer at the rate of 0.60 kg/sqm using mechanical means.
Road Sub 2.3 MORTH Providing and applying tack coat on the prepared surface heating by MORTH 503 Square 12.5 0.3
grade 503 fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. Meter
surface 2.5 kg/10 sqm.VG-30 bulk bitumen
Road Sub 2.31 MORTH Providing and applying tack coat on the prepared surface heating by MORTH 503 Square 15 0.2
grade 503 fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. Meter
surface 3 kg/10 sqm. VG-30 bulk bitumen
Road Sub 2.32 MORTH Providing and applying tack coat on the prepared surface heating by MORTH 503 Square NA NA
grade 503 flames in Boiler and spraying bitumen with sprayer on Granular surface Meter
treated with primer @ 2.75 kg/10 sqm with VG-30 bulk Bitumen
Road Sub 2.33 MORTH Providing and applying tack coat on the prepared surface heating by MORTH 503 Square NA NA
grade 503 flames in Boiler and spraying bitumen with sprayer on Concrete surface Meter
treated with primer @ 3.25 kg/10 sqm with VG-30 bulk Bitumen
Road Sub 2.34 MORTH Providing and applying tack coat with bitumen emulsion (RS1) using MORTH 503 Square 9 0.2
grade 503 emulsion pressure distributer at the rate of 0.20 kg per Sq.M. on the Meter
prepared bituminous cleaned with mechanical broom
Road Sub 2.35 MORTH Providing and constructing 75 mm. thick Modified Penetration Macadam MORTH Square NA NA
grade (MPM) road surface including all materials, preparing the existing road Meter
surface, spreading 40 mm. stone metal layers 30% crusher broken metal
+ 70% Hand broken (by breaking rubble obtained by blasting) heating
and spraying the bitumen of VG-30 grade @ 2 Kg/sqm, spreading 12
mm.size chips compacting with three wheel static roller having weight 8
to 10 MT. to achive the desired degree of compaction as per Technical
Specification Clause 506 etc. complete. Including picking of existing
WBM surface.
Road Sub 2.36 MORTH Providing and constructing 75 mm. thick Modified Penetraction MORTH Square NA NA
grade Macadam (MPM) road surface including all materials, preparing the Meter
existing road surface, spreading 40 mm. stone layers metal 30% crusher
broken metal + 70% Hand broken metal (By breaking Rubble obtained by
blasting) , heating and spraying the bitumen of VG-30 grade @ 2 kg /
sqm , spreading 12mm.size chips compacting with three wheel static
roller having weight 8 to 10 MT. to achive the desired degree of
compaction as per Technical Specification Clause 506 etc.complete,
including applying tack coat of VG 10 grade bitumen at the rate of 0.30
Kg./ Sqm. on existing bitumen surface.
Road Sub 2.37 MORTH Providing and constructing 50 mm. thick Modified Penetration Macadam MORTH Square NA NA
grade (MPM) road surface including all mataerials, preparing the existing road Meter
surface, spreading 40mm. stone metal layers 30% crusher broken metal +
70% Hand broken (by breaking rubble obtained by blasting) heating and
spraying the bitumen of VG-30 grade @ 1.75 kg/sqm, spreading
12mm.size chips compacting with static roller having weight 8 to 10 MT.
to achive the desired degree of compaction as per Technical Specification
Clause 506 etc. complete. Including picking of existing WBM surface.
Road Sub 2.38 MORTH Providing and constructing 50 mm. thick Modified Penetration MORTH Square NA NA
grade Macadam (MPM) road surface including all materials, preparing the Meter
existing road surface, spreading 40mm. stone layers metal 30% crusher
broken metal + 70% Hand broken metal (By breaking Rubble obtained by
blasting) , heating and spraying the bitumen of VG-30 @ 1.75 kg / sqm,
spreading 12mm.size chips compacting with Static roller having weight 8
to 10 MT. to achive the desired degree of compaction as per Technical
Specification Clause 506 etc.complete, including applying tack coat at the
rate of 0.30 Kg./ Sqm.(on existing bitumen surface.)
Road Sub 2.39 MORTH Providing, laying and compacting of built-up-spray grout layer 75 mm MORTH Square NA NA
grade thick over prepared base consisting of two layers composite Meter
construction of compacted crushed coarse aggregates with application of
bituminous binder of VG-30 Grade @ 1.520 Kg/ Sqm after each layer, (
i.e 1.520x2=3.04 say 3.00 Kg/Sqm) and with key aggregates placed on top
of the second layer and compacting with static roller 8 to 10 MT.
Excluding cost of tack coat and scarifying etc. Complete.
Road Sub 2.4 MORTH BITUMINOUS MACADAM: Proving and laying bituminous macadam using MORTH 504 Cubic 5070 45
grade 504 crushed aggregates of Grading 1, premixed with bituminous binder, Meter
transported to site with VTS , laid over a previously prepared surface,
finished to the required grade, level, alignment, and rolling to achieve the
desired compaction for 80/100 mm compacted thickness with 3.3 % VG-
30 Bitumen. -- USING 80 TPH Batch mix type hot mix plant with SCADA,
Sensor Paver, Intelligent Compactor with compaction analyzer and V-Sat
attachment.
Road Sub 2.41 MORTH BITUMINOUS MACADAM: Proving and laying bituminous macadam using MORTH 504 Cubic 5160 33
grade 504 crushed aggregates of Grading 2, premixed with bituminous binder, Meter
transported to site with VTS , laid over a previously prepared surface,
finished to the required grade, level, alignment, and rolling to achieve the
desired compaction for 50/75 mm compacted thickness with 3.4 % VG-
30 Bitumen. -- USING 80 TPH Batch mix type hot mix plant with SCADA,
Sensor Paver, Intelligent Compactor with compaction analyzer and V-Sat
attachment.
Road Sub 2.42 MORTH BITUMINOUS MACADAM:--Providing and laying bituminous macadam MORTH 504 Cubic 5070 39
grade 504 using crushed aggregate of Grading 1, premixed with bituminous binder, Meter
transported at site with VTS, laid over a previously prepared surface ,
finished to the required grade ,level, alignment,and rolling to achieve the
desired density for 80/100 mm compacted thickness with drum mix type
hot mix plant with SCADA having complying essential features of Hot mix
plant as per IRC-27 2009 specified conditions and attachments such as
electronic load sensor based belt conveyers,automatic synchronization of
bitumen and aggregate fedder,built in dust controller system and PLC for
Drum Mix plant ,Sensor paver,and Vibratory roller excluding prime/Tack
coat etc. complete --Bitumen VG-30 grade 3.30%
Road Sub 2.43 MORTH BITUMINOUS MACADAM:--Providing and laying bituminous macadam MORTH 504 Cubic 5180 39
grade 504 using crushed aggregate of Grading 2, premixed with bituminous binder, Meter
transported at site with VTS, laid over a previously prepared surface
,finished to the required grade ,level, alignment, and rolling to achieve
the desired density for 50/75 mm compacted thickness with -- Using
drum mix type hot mix plant with SCADA having complying essential
features of Hot mix plant as per IRC-27-2009 specified conditions and
attachments such as electronic load sensor based belt conveyers,
automatic synchronization of bitumen and aggregate fedder, built in dust
controller system and PLC for Drum Mix plant, Sensor paver and
Vibratory roller excluding prime/Tack coat etc.complete --Bitumen VG-30
grade 3.40%
Road Sub 2.44 MORTH DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous MORTH 505 Cubic 6960 41
grade 505 macadam using crushed aggregates of Grading 1, premixed with Meter
bituminous binder VG-30 Bitumen @ 4.50 per cent by weight of total mix
and filler, transported to site with VTS , laid over a previously prepared
surface, finished to the required grade, level, alignment, and rolling to
achieve the desired density for 76-100 mm compacted thickness .USING
80 TPH Batch mix type hot mix plant with SCADA, Sensor Paver,
Intelligent Compactor with compaction analyzer and V-Sat attachment
with Stone Dust filler.
Road Sub 2.45 MORTH DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous MORTH 505 Cubic NA NA
grade 505 macadam using crushed aggregates of grading 2, premixed with Meter
bituminous binder VG-30 Bitumen @ 4.50 per cent by weight of total mix
and filler, transported to site with VTS , laid over a previously prepared
surface, finished to the required grade, level, alignment, and rolling to
achieve the desired density for 50/75 mm compacted thickness .USING
80 TPH Batch mix type hot mix plant with SCADA, Sensor Paver,
Intelligent Compactor with compaction analyzer and V-Sat attachment
with Stone Dust filler.
Road Sub 2.46 MORTH DENSE BITUMINOUS MACADAM:--Providing and laying dense bituminous MORTH 505 Cubic NA NA
grade 505 macadam using crushed aggregate of grading 1, premixed with Meter
bituminous binder Bitumen VG-30 grade,@ 4.50 % by weight of total mix
and filler, transported at site with VTS, laid over a previously prepared
surface , finished to the required grade ,level, alignment,and rolling to
achieve the desired density for 76/100 mm compacted thickness with
drum mix type hot mix plant with SCADA having complying essential
features of Hot mix plant as per IRC-27-2009 specified conditions and
attachments such as electronic load sensor based belt conveyers,
automatic synchronization of bitumen and aggregate fedder,built in dust
controller system and PLC for Drum Mix plant ,Sensor paver, and
Vibratory roller excluding prime/Tack coat etc. complete --Bitumen VG-
30 grade with stone dust filler
Road Sub 2.47 MORTH DENSE BITUMINOUS MACADAM:--Providing and laying dense bituminous MORTH 505 Cubic NA NA
grade 505 macadam using crushed aggregate of grading 2, premixed with Meter
bituminous binder,@ 4.50 % by weight of total mix and filler, transported
at site with VTS, laid over a previously prepared surface , finished to the
required grade ,level, alignment,and rolling to achieve the desired
density for 50/75 mm compacted thickness with drum mix type hot mix
plant with SCADA having complying essential features of Hot mix plant as
per IRC-27-2009 specified conditions and attachments such as electronic
load sensor based belt conveyers, automatic synchronization of bitumen
and aggregate fedder,built in dust controller system and PLC for Drum
Mix plant ,Sensor paver, and Vibratory roller excluding prime/Tack coat
etc. complete --Bitumen VG-30 grade with stone dust filler
Road Sub 2.48 MORTH BITUMINOUS CONCRETE:- Providing and laying bituminous concrete MORTH 507 Cubic NA NA
grade 507 using crushed aggregates of grading 1, premixed with bituminous binder Meter
@ 5.20 per cent by weight of total mix and filler, transported to site with
VTS , laid over a previously prepared surface, finished to the required
grade, level, alignment, and rolling to achieve the desired compaction
for 50 mm compacted thickness with VG-30 Bitumen,Excluding prime /
tack coat. For Bitumen VG-30 bulk -- USING 80 TPH Batch mix type hot
mix plant with SCADA, Sensor Paver, Intelligent Compactor with
compaction analyzer and V-Sat attachment with Stone Dust filler
Road Sub 2.49 MORTH BITUMINOUS CONCRETE:- Providing and laying bituminous concrete MORTH 507 Cubic 7395 43
grade 507 using crushed aggregates of grading 2, premixed with bituminous binder Meter
@ 5.40 per cent by weight of total mix and filler, transported to site with
VTS , laid over a previously prepared surface, finished to the required
grade, level, alignment, and rolling to achieve the desired compaction
for 30/40 mm compacted thickness with VG-30 Bitumen,Excluding prime
/ tack coat. For Bitumen VG-30 bulk -- USING 80 TPH Batch mix type hot
mix plant with SCADA, Sensor Paver, Intelligent Compactor with
compaction analyzer and V-Sat attachment with Stone Dust filler
Road Sub 2.5 MORTH BITUMINOUS CONCRETE:--Providing and laying bituminous concrete MORTH 507 Cubic NA NA
grade 507 using crushed aggregate of grading 1, premixed with bituminous binder Meter
@5.2% by weight of total mix and filler, transported at site with VTS, laid
over a previously prepared surface, finished to the required grade ,level,
alignment, and rolling to achieve the desired density for 50mm
compacted thickness with drum mix plant with SCADA, Sensor paver and
Road Sub 2.51 MORTH BITUMINOUS CONCRETE:--Providing and laying bituminous concrete MORTH 507 Cubic 7395 43
grade 507 using crushed aggregate of grading 2, premixed with bituminous binder Meter
@5.4% by weight of total mix and filler, transported at site with VTS, laid
over a previously prepared surface, finished to the required grade ,level,
alignment, and rolling to achieve the desired density for 30/40 mm
compacted thickness with drum mix plant with SCADA, Sensor paver and
Report Name: e DSR
No. No. Specification (Completed Rate (Labour Rate
In Rs. per unit) In Rs. per unit)
Road Sub Base 3.01 MORTH 511 Providing bituminous Type A liquid seal coat on bituminous MORTH 511 Square 52 7
and Base surface including supplying all materials & bitumen of VG-30 Meter
Course grade preparing existing road surface, heating and applying
bitumen @ 0.98 Kg./Sqm. by mechanical means, spreading chips
and rolling, by static roller having weight 8 to 10 MT. etc.
complete.
Road Sub Base 3.02 MORTH 511 Providing and laying of Type - B premix seal coat with HMP of MORTH 511 Square NA NA
and Base approprate capacity not less than 75 tonne / hour using crushed Meter
Course stone chipping 6.70 mm size and penetration bitumen of VG-30
grade @ 0.68 Kg / Sqm. , preparing existing road surface
including mixing in suitable drum mix plant and rolling by static
roller having weight 8 to 10 MT. etc. complete.
Road Sub Base 3.03 MORTH 511 Providing and laying of Type - B premix seal coat with HMP of MORTH 511 Square 37 6
and Base approprate crushed stone chipping 6.70 mm size and Meter
Course penetration bitumen of VG-30 grade @ 0.68 Kg / Sqm. ,
preparing existing road surface including mixing in suitable
Batch Mix plant and rolling by static roller having weight 8 to
10 MT. etc. complete.
Road Sub Base 3.04 MORTH 509 Surface Dressing -- Providing and laying surface dressing as MORTH 509 Square 69 1
and Base wearing course in single coat using crushed stone aggregates of Meter
Course specified size on a layer of bituminous binder laid on prepared
surface and rolling with 8-10 tonne smooth wheeled steel roller. -
- a) 19 mm nominal chippling size (bitumen 12.00 kg/10 Sq.M.) --
Bitumen VG-30 bulk bitumen
- b) 13 mm nominal chippling size (bitumen 10.00 kg/10 Sq.M --
- c) 10 mm nominal chippling size (bitumen 9.0 kg/10 Sq.M --
Road Sub Base 3.07 MORTH 509 Surface Dressing -- Providing and laying surface dressing as MORTH 509 Square NA NA
-d) 6 mm nominal chippling size (bitumen 7.50 kg/10 Sq.M --
Road Sub Base 3.08 MORTH 510 Open Graded Premix Surfacing- Providing and Laying OGC 20 MORTH 510 Square 101 14
and Base mm thickness composed of 13.2 mm to 5.6 mm aggregates Meter
Course premixed with bituminous binder transported to site with VTS ,
laid over a previously prepared surface, finished to the required
grade, level, alignment, and rolling to achieve the desired
compaction VG-30 Bitumen, including providing and laying seal
coat sealing voids in a bituminious surface laid to the specified
level and cross fall using Type A seal coat but excluding prime /
tack coat. For Bitumen VG-30 bulk--USING drum mix type hot
mix plant with SCADA, Paver and Vibratory roller
Road Sub Base 3.09 MORTH 510 Open Graded Premix Surfacing- Providing and Laying OGC 20 MORTH 510 Square 158 11
Course premixed with bituminous binder transported to site with VTS ,
laid over a previously prepared surface, finished to the required
grade, level, alignment, and rolling to achieve the desired
compaction VG-30 Bitumen, including providing and laying seal
coat sealing voids in a bituminious surface laid to the specified
level and cross fall using Type A seal coat but excluding prime /
tack coat. For Bitumen VG-30 bulk -- USING 80 TPH Batch mix
type hot mix plant with SCADA, Paver and Vibratory roller
In Rs. per unit) In Rs. per unit)
Road Sub Base 3.1 MORTH 510 Open Graded Premix Surfacing- Providing and Laying OGC 20 MORTH 510 Square NA NA
Course premixed with bituminous binder VG 30 Grade transported to
site with VTS , laid over a previously prepared surface, finished
to the required grade, level, alignment, and rolling to achieve
the desired compaction , including providing and laying seal coat
sealing voids in a bituminious surface laid to the specified level
and cross fall using Type A seal coat but excluding prime / tack
coat. For Bitumen VG-30 bulk -- USING 80 TPH Batch mix type
hot mix plant with SCADA, Sensor Paver, Intelligent Compactor
with compaction analyzer and V-Sat attachment.
Report Name: e DSR
In Rs. per unit) In Rs. per
unit)
Road 4.01 MORTH Providing and laying in-situ M30 Grade unreinforced plain cement MORTH 602 Cubic NA NA
Surfacing 602 concrete pavement over a prepared sub base with 43 grade cement , Meter
Course coarse and fine aggregate conforming to IS 383, using fine & coarse
aggregates combined gradation as per Table 600-3 of MORTH
Specification 2013, mixed in a batching and mixing plant/ non tilting
mixer and Weigh batcher as per approved mix design, admixtures,
transporting to site, spreading, laying with approved make
paver,compacted and finished in a continuous operation, finishing to
lines and grades as directed by Engineer-in-charge and curing by
curing compound /by providing cement vata in cement Mortar 1:8
@0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40
mm at top with depth of 75mm and maintaining the same throughout
curing period./ by any other method approved by Engineer-in-charge (
initial lead of 5.00 Km for raw materials up to plant site) Spec. No.
M.O.R.T.& H 2013. Cl-602 P.N.263
M.O.R.T.& H 2013. Cl-602 P.N.263
M.O.R.T.& H 2013. Cl-602 P.N.263
transporting to site, spreading, laying compacting and finished in a
continuous operation, finishing to lines and grades as directed by
Engineer-in-charge and curing by curing compound /by providing
cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre,
admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm
and maintaining the same throughout curing period./ by any other
method approved by Engineer-in-charge ( initial lead of 5.00 Km for raw
materials up to plant site) Spec. No. M.O.R.T.& H 2013. Cl-602
P.N.263
unit)
P.N.263
P.N.263
Surfacing 602 concrete pavement with max 20% fly Ash ( Fly-ash upto 20% by weight Meter
Course of Cement) over a prepared sub base with 43 grade cement , coarse
and fine aggregate conforming to IS 383, using fine & coarse aggregates
combined gradation as per Table 600-3 of MORTH Specification 2013,
mixed in a batching and mixing plant/ non tilting mixer and Weigh
batcher as per approved mix design, admixtures, transporting to site,
spreading, laying with approved make paver,compacted and finished in
a continuous operation, finishing to lines and grades as directed by
P.N.263
P.N.263
unit)
P.N.263
Course of Cement)over a prepared sub base with 43 grade cement , coarse and
fine aggregate conforming to IS 383, using fine & coarse aggregates
spreading, laying compacting and finished in a continuous operation,
finishing to lines and grades as directed by Engineer-in-charge and
curing by curing compound /by providing cement vata in cement
Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at
bottom and 40 mm at top with depth of 75mm and maintaining the
same throughout curing period./ by any other method approved by
Engineer-in-charge ( initial lead of 5.00 Km for raw materials up to plant
site) Spec. No. M.O.R.T.& H 2013. Cl-602 P.N.263
Road 4.13 MORTH Construction of dry lean cement concrete Sub- base over a prepared MORTH 601 Cubic NA NA
Surfacing 601 sub-grade with coarse and fine aggregate conforming to IS: 383, the Meter
Course size of coarse aggregate not exceeding 25 mm, , cement content not to
be less than 150 kg/ cum, optimum moisture content to be determined
during trial length construction, concrete strength not to be less than
10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer,
transported to site with all leads and lifts, laid with a paver with
electronic sensor /by suitable means as approved by Engineer-in-
charge , compacting with vibratory roller, finishing, curing and
including preparation of sub-grade surface if required etc. complete.
unit)
Road 4.14 MORTH Providing and fixing in position mild steel 32 mm dia dowel bars MORTH Number NA NA
Surfacing 602.2.8 precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long 602.2.8
Course and at 30.00 cm. C/C & wherever directed including handling,
straightening, necessary cutting supported by HYSD chairs with proper
alignment by using properly designed assembly of Bulkheads lubricating
half length with bituminous paint as directed etc. complete.
Road 4.15 MORTH Providing and fixing in position mild steel 25mm dia dowel bars MORTH Number NA NA
Surfacing 602.2.8 precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long 602.2.8
Course and at 30.00 cm. C/C & wherever directed including handling,
straightening, necessary cutting supported by HYSD chairs with proper
alignment by using properly designed assembly of Bulkheads lubricating
half length with bituminous paint as directed etc. complete.
Road 4.16 MORTH Providing and fixing in position HYSD tie bars precoated with MORTH Number NA NA
Surfacing 602.2.8 anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. 602.2.8
Course C/C & wherever directed including handling, straightening wrapping
with paper of approved quality for half length, necessary cutting,
handling, straightening , supported by assembly of HYSD chairs with
proper alignment etc. complete.
Road 4.17 MORTH Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. MORTH 602.6 Running NA NA
Surfacing 602.6 .in concrete slab using concrete cutting machine with diamond studded Meter
Course saw within 48 hours of casting of bay / slab etc. complete including
subsequent widening of the groove 8 to 10 mm. wide at top having
depth of 15 mm. as directed by Engineer incharge.
Road 4.18 MORTH Providing to contraction joints polysuphide sealent (Pouring grade) MORTH Running NA NA
Surfacing 602.10.3 confirming to BS : 5212 - 1989 into sawed groove widened at top for 602.10.3 Meter
Course sealent reservoir of specified size and shape as per detailed drawing
including fixing Polyethylene foam backer rod of required diameter
(appraox. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with
bond breaking tape as per detailed drawing. Item includes cleaning the
joints with water jet / air compressor & allowing joint to become
thoroughly dry before sealent is applied and applying primer.
(A) Contraction & longitudinal joints (15 mm. deep x 8 mm.wide)
Road 4.19 MORTH Providing and laying 125 micron Low Density Polyethylene ( LDPE) MORTH 605 Square NA NA
Surfacing 605 sheet confirming to IS 3395 : 1997 below concrete pavement including Meter
Course all materials and labour complete.
Road 4.2 MORTH Providing and fixing factory made Hydraulically pressed Mechanically MORTH Square NA NA
Surfacing 410.3.6 vibrated and compacted precast inter locking cement concrete paving 410.3.6 Meter
Course blocks 80MM thick in M-40 grade of approved size and shape for City
streets, small /medium market roads,low volume roads, utility cuts on
arterial roads etc. as specified and as per IS 15658:2006 including cost
of all materials, manufacturing, curing, transportation of blocks to work
site including loading, unloading and stacking as directed, laying paving
blocks in position over prepared bed of natural sand / crushed sand of
50 mm thickness including necessary excavation in all stratas, spreading
blindge of fine sand over the prepared bed, compacting blocks by plate
vibrator etc. complete.
Road 4.21 MORTH Providing and fixing factory made Hydraulically pressed Mechanically MORTH Square NA NA
Surfacing 410.3.6 vibrated and compacted precast inter locking cement concrete paving 410.3.6 Meter
Course blocks 100MM thick in M-40 grade of approved size and shape for City
streets and roads with high volume/ heavy traffice as specified and as
per IS 15658:2006 including cost of all materials, manufacturing, curing,
transportation of blocks to work site including loading, unloading and
stacking as directed, laying paving blocks in position over prepared bed
of natural sand / crushed sand of 50 mm thickness including necessary
excavation in all stratas, spreading blindge of fine sand over the
prepared bed, compacting blocks by plate vibrator etc. complete.
Road 4.22 MORTH Providing and laying in situ cement concrete M -30 with tremix MORTH Cubic 6362 454
Surfacing treatment for 200 mm thickness for Concrete Road is including laying Meter
Course plastic sheet for 125 micron thickness with groove cutting of 4 mm
wide and 20 mm deep with necessary refilling with bitumen ( excluding
reinforcement) with Natural sand etc. complete
Report Name: e DSR
No. No. Specification (Completed (Labour Rate
Rate In Rs. per In Rs. per
unit) unit)
Rigid 5.01 MORTH 807 Providing and fixing trap/ granite/ quartzite/ gneiss guard stone/ MORTH 807 Number 294 116
Pavement indicator stones/ boundary stones of standard size and shape
including fixing in block of standard size of cement concrete 1:4:8
white washing etc.complete
Rigid 5.02 MORTH 807 Providing and fixing trap /granite/ quartzite/ gneiss/ guard stone/ MORTH 807 Number 132 86
Pavement indicator stones/ boundry stones of standard size & shape
including fixing In ground and white washing etc. complete
Rigid 5.03 MORTH 807 Providing and fixing M-15 R.C.C. guard stone/ indicator stones/ MORTH 807 Number 347 94
Pavement boundary stones of standard size and shape including fixing in C.C.
1:4:8 and white washing etc. complete.
Rigid 5.04 MORTH 805 Providing and fixing R.C.C. 200 metre stones as per I.R.C. standard MORTH 805 Number 400 83
Pavement including fixing in standard size C.C.1:4:8 block including?curing,
painting lettering etc. complete.
Rigid 5.05 MORTH 805 Providing & fixing R.C.C. 1:2:4 ordinary km. stones including MORTH 805 Number 2175 265
Pavement painting numbering etc. complete for N.H./ S.H./ M.D.R. etc. as
per IRC design for highway km stone and fixing in standard size
C.C. 1:4:8 block etc. complete.
Rigid 5.06 MORTH 805 Providing and fixing R.C.C. 5th Km. stones, on N.H./ S.H./ M.D.R. MORTH 805 Number 2468 302
Pavement etc. including painting, numbering etc complete as per IRC design
for highway km. stones and fixing in standard size c.c. 1:4:8 block
complete.
Rigid 5.07 MORTH 202 Dismantling of 5th KM Stone including cutting of earth, foundation MORTH 202 Number 357 270
Pavement and disposal of dismantled material with all lifts and lead upto
1000 m and back filling of pit.
Rigid 5.08 MORTH 202 Dismantling of Ordinary KM Stone including cutting of earth, MORTH 202 Number 215 159
Pavement foundation and disposal of dismantled material with all lifts and
lead upto 1000 m and back filling of pit.
Rigid 5.09 MORTH 202 Dismantling of Hectometer Stone including cutting of earth, MORTH 202 Number 44 33
Pavement foundation and disposal of dismantled material with all lifts and
lead upto 1000 m and back filling of pit.
Rigid 5.1 MORTH 805.1 Painting with approved enamel paint in two coats including MORTH 805.1 Number 40 16
Pavement cleaning surface and lettering for two hundred metre stone etc.
complete.
Pavement cleaning surface and lettering for ordinary kilometre stone etc.
complete.
Pavement cleaning surface and lettering for fifth k.m. stone etc. complete.
Pavement cleaning surface and lettering for boundary stones etc. complete.
Rigid 5.14 MORTH 801 Painting with approved enamel paint in two coats including MORTH 801 Number 61 31
Pavement cleaning surface and lettering for cautionary/ mandatory sign
boards and village name boards etc. complete.
Pavement cleaning surface and lettering for informatory sign boards etc.
complete.
Pavement cleaning surface and lettering on masonry works with nalla flow
direction, span number and location etc. complete.
Rigid 5.17 MORTH 801 Painting letters upto 20 cm height complete brushes, coir MORTH 801 Number 7 4
Pavement brushers, dusting, cleaning, including cost of paint etc. complete.
Rigid 5.18 MORTH 801 Painting and numbering trees with white background and black MORTH 801 Number 11 4
Pavement lettering etc. complete.
Rigid 5.19 MORTH 801 Providing white & colour washing to road side trees in 2 coats in 2 MORTH 801 Number 11 8
Pavement bands of white and one red band at centre of 30 cm height each
including preparing the surface, cost of material, conveying etc.
complete.
Rigid 5.2 MORTH 801 Painting Line, Dashes, Arrows etc on Roads in two coats on new MORTH 801 Square 112 68
Pavement work with ready mixed road marking paint confirming to I.S. 164 Meter
on Bituminous surface including cleaning the surface of all dirt,
dust and other foreign matter, demarcation at site and traffic
control (Over 10cm wide) (MORTH-803) -- New Surface
control (Upto 10cm wide) (MORTH-803) -- New Surface
unit) unit)
control (Over 10cm wide) (MORTH-803) -- Old Surface
control (Upto 10cm wide) (MORTH-803) -- Old Surface
Rigid 5.24 MORTH 806 Supplying & Fixing of Molded Shank Raised Pavement Markers / MORTH 806 Number 1720 333
Pavement Cat's Eye made of polycarbonate and ABS moulded body and
reflective panels with micro prismatic lens capable of providing
total internal reflection of the light entering the lens face and shall
support a load of 16000 kg tested in accordance to ASTM D 4280
Type H and complying to Specifications of Category A of MORTH
Circular No RW/NH/33023/10-97 ? DO III Dt 11.06. 1997. The
height, width and length shall not exceed 50 mm, 100 mm and 102
+/- 2 mm and with minimum reflective area of 13 Sqcm on each
side and the slope to the base shall be 35 +/- 5 degree. The
strength of detachment of the integrated cylindrical shanks, (of
diameter not less than 19 +/- 2 mm and height not less than 30+/-
2 mm) from the body is to be a minimum value of 500 Kgf. Fixing
will be by drilling holes on the road for the shanks to go inside,
without nails and using epoxy resin based adhesive as per
manufacturer?s recommendation and complete as directed by the
engineer.
Rigid 5.25 MORTH 806 Providing and Fixing of Median Marker that are made of tough, MORTH 806 Number 575 25
Pavement high impact resistant, injection-molded, thermoplastic body with
an isosceles trapezoidal structure of length, width and height not
less than 15cm, 10cm and 10cm respectively and thickness not
less than 1.8mm, the body structure shall be rounded at its acute
angle, all the corners and edges. The plastic used for molding the
Median Marker shall have a minimum Notched Izod Impact
strength value of 600 J/m at room temperature, when tested in
accordance with ASTM D256 and shall retain at least 70% of this
value when subjected to accelerated weathering for 1000hrs as
per ASTM G155 or UL746C. The logo of the manufacturer shall be
embossed on either side of the body in the injection molding
process. The Median Marker shall have rectangular-shaped,
fluorescent yellow color retro-reflective sheeting of size not less
than 8.5cm*8.5cm and with fully reflective micro prismatic cube
corners as its retro-reflective elements as per IRC 67 2010 and
ASTM D4956 type XI specifications reflectivity values. The retro-
reflective sheeting shall be one or both sides of the Median
Marker and shall be edge protected with no exposed edges which
will prevent edge lifting, vandalism, sheeting damage, etc. The
Median Marker shall be fixed by a combination of epoxy adhesive
and grouting.
Rigid 5.26 MORTH 806 The Aluminum-backed flexible prismatic (AFP) sheeting shall MORTH 806 Square 6839 321
Pavement consist of Yellow colored flexible prismatic sheeting with non- Meter
metallic prismatic lens as Retroreflective elements and conforming
to ASTM D 4956-09 Type VI specification for rebound able
Retroreflective sheeting. This flexible prismatic sheeting shall be of
1ft width and laminated at the back with a 50 micron Aluminum
(Al) foil with pressure sensitive adhesive and liner. Further, this
flexible prismatic sheeting shall have screen printed arrow/slant
line pattern in black color in a continuous roll format. Neither AFP
sheeting nor the flexible prismatic sheeting used in it shall crack
when slowly bent in 1 second time around a 1/8th inch mandrel
after being conditioned for 24hrs at 0?C and tested as per section
S2.2.2. of ASTM D 4956-09. The AFP sheeting, with the liner
removed, shall be applied with a neoprene contact adhesive with a
Polychloroprene as base, viscosity of 200-450 cps and solid
content of 20-30%. Once applied, the edges of the product shall be
sealed all around with a two-part epoxy based structural adhesive
and shall be extremely resistant to peel-off. A test report from
institutes like ARAI/CRRI confirming to above mentioned flexibility
and ASTM-D4956-09 Type-VI retro reflectivity performance of the
flexible prismatic sheeting used in AFP shall be submitted by the
tenderer during prequalification and supply of material.
unit) unit)
Rigid 5.27 MORTH 806 Providing Vertical Delineator having wide angle cube corner micro MORTH 806 Number 1350 168
Pavement prismatic non metallic reflective sheeting confirming to Type XI of
ASTM D4956 -09 with White Color and Red Color combination
and having minimum of retro reflective exposed area of 125 Sq
CM on top slots & 35 Sq CM on bottom slots and no edges shall be
exposed for tampering. This tubular delineator shall have a core
and shell construction, shell shall be made of tough, high impact
resistant, injection-molded, thermoplastic outer body & the inner
core shall consist of powder coated or painted Mild steel of
minimum thickness 1.0mm.& core-shell structure shall be of
height not less than 800 mm above the ground and width not less
than 80 mm. The metallic core of the delineator shall extend
300mm beyond the shell length from bottom for installing in the
ground. The extended portion shall have slots to insert anchoring
rods for enhancing the concrete grip. The logo of the
manufacturer shall be embossed on either side of the body in the
injection molding process. The engineering thermoplastic used for
making the delineator body shall have minimum initial mechanical
properties of 600J/m tested in accordance with ASTM D256 and
shall retain at least 70% of these minimum initial values when
subjected to accelerated weathering for 1000hrs as per ASTM
G155 or UL 746C and as per IRC 79 specifications and including
fixing the unit in M20 Grade Cement Concrete of Size 30x30x40 cm
including excavation for pit.
Rigid 5.28 MORTH 804 Supplying of Solar Raised Pavement Markers made of MORTH 804 Number 3330 60
Pavement polycarbonate molded body with circular shape, solar powered,
LED self illumination in active mode, 360 degree illumination and
reflective panels with micro prismatic lens capable of providing
total internal reflection of the light entering the lens face in
passive mode. The marker shall support a load of 20000 kg tested
in accordance to ASTM D 4280. The marker should be resistant to
dust and water ingress according to IP 65 standards and should
withstand temperatures in the range of 0 C to 70 C. Color of
lighting could be provided in red or yellow (amber) as per
requirement and typical frequency of blinking is 1 Hz. There
should be current losses of less than 20 micro-amperes at 2.4 V in
sleep-charging mode to enhance the life of the marker and a full
charge should provide for a minimum autonomy of 50 hours. The
height, width and length of the marker shall not be less than 10
mm x 100 mm x 100 mm. Also, the surface diameter of the marker
shall not be less than 100 mm respectively. The weight of the
marker shall not exceed 0.5 Kilograms. Fixing will be by drilling
holes on the road for the shanks to go inside, without nails and
using epoxy resin based adhesive and complete as directed by the
engineer.
Rigid 5.29 MORTH 801 Fixing in position Cautionary/ Mandatory sign boards in ground MORTH 801 Number 564 125
Pavement with C C 1:4:8 block of 60cm x 60cm x 75cm size etc. complete as
directed including all leads.
Rigid 5.3 MORTH 801 Fixing in position Road Junction/ Informatory Sign Board in ground MORTH 801 Number 860 151
Pavement with C.C.1:4:8 block of 60cm x 60cm x 75cm size including all leads
complete.
Rigid 5.31 MORTH 806 Supplying precast conventional reflective delinators on four sides MORTH 806 Number 246 84
Pavement for road signs
Rigid 5.32 MORTH 806 Providing and fixing including conveyance charges upto a distance MORTH 806 Number 324 86
Pavement of 200 Km. precast concrete post delinators, post of size 130 x 90 x
1300 milimetre consisting of 4 B.T. wires with 14,000 Kg/cm2 C.C.
M-20 grade 16mm dia. hold fast, including excavation & C.C. 1:4:8
foundation block, oil painting post with 3 coats and Red
fluorescent tape 75 x 75mm and white floursent border 20mm
wide around the red tape on all the four sides with necessary
adhesive and lamination etc. complete.
Rigid 5.33 MORTH 806 Road Delineators supplying and installation of delineators MORTH 806 Number 955 13
Pavement (Roadway Indicators, Hazard markers, Object markers) 80 to 100
cm high above ground level, painted black and white in 15 cm
wide strips, fitted with 80x100mm rectangular or 75mm dia.
Circular reflectorised panels at the top, buried or pressed into the
ground and confirming to I.R.C. 79 and the drawings
Rigid 5.34 MORTH 804 Providing and fixing reflective fluorescent tape on old road sign MORTH 804 Square 5770 0.25
Pavement board including cleaning / scraping and painting existing board Meter
etc. complete
unit) unit)
Rigid 5.35 MORTH 803.4 Road Marking with Hot Applied Thermoplastic Compound with MORTH 803.4 Square 500 14
Pavement Reflectorizing Glass Beads on Bituminous Surface- Providing and Meter
laying of hot applied thermoplastic compound 2.5 mm thick
including reflectorizing glass beads @ 250 gms per sqm area,
thickness of 2.5 mm is exclusive of surface applied glass beads as
per IRC:35 .The finished surface to be level, uniform and free from
streaks and holes.complete.
Rigid 5.36 MORTH 801 Supplying rolled steel channel post of 100 x 50 mm (ISMC) drilled MORTH 801 Number NA NA
Pavement on top and painted with one coat of epoxy primer and two coats
of epoxy finish paint having black and white bands of 25 cm last
part of the post 0.75 m below ground level is painted with three
coats of red lead paint with 2 nos. of high tensile G.I. bolt and nut
of size 10 mm Dia. of 25 mm long including transportation etc.
complete. Spec. No. : As per IRC-67, & M.O.R.T. & H. Circular No.
RW/NH-33023/31/88 D.O.III Dated 2-5-1994
Rigid 5.37 MORTH 801 Supplying M.S. Angle iron post of size 65 mm x 65 mm x 6 mm MORTH 801 Number NA NA
Pavement drilled on top and painted with one coat of epoxy primer and two
coats of epoxy finish paint having black and white bands of 25 cm,
last part of the post 0.75 m below ground level is painted with
three coats of red lead paint with 2 nos. of high tensile G.I. bolt
and nut of size 10 mm dia. of 25 mm long including transportation
etc. complete. Spec. No. : As per IRC-67, & M.O.R.T. & H. Circular
No. RW/NH-33023/31/88 D.O.III Dated 2-5-1994
Rigid 5.38 MORTH 801 Supplying M.S. Angle iron post of size 65 mm x 65 mm x 6 mm duly MORTH 801 Number NA NA
Pavement painted with one coat of red oxide paint and two coats of
synthetic enamel finish paint having black and white bands of 25
cm width including 2 nos of G.I. bolt and nut of size 10 mm dia.
And 20 mm long including transportation etc. complete. Spec. No.
: As per IRC-67, & M.O.R.T. & H. Circular No. RW/NH-33023/31/88
D.O.III Dated 2-5-1994
Rigid 5.39 MORTH 801 Supplying M.S. Angle iron post of size 50 mm x 50 mm x 5 mm duly MORTH 801 Number NA NA
Pavement painted with one coat of red oxide paint and two coats of
synthetic enamel finish paint having black and white bands of 25
cm width including 2 nos of G.I. bolt and nut of size 10 mm dia.
and 20 mm long including transportation etc. complete. Spec. No.
: As per IRC-67, & M.O.R.T. & H. Circular No. RW/NH-33023/31/88
D.O.III Dated 2-5-1994
Rigid 5.4 MORTH 801 Supplying M.S. Angle iron frame for informatory sign boards of MORTH 801 Number NA NA
Pavement size 35 mm x 35 mm x 3 mm welded and making neccesary holes
required for fixing and painted with one coat of epoxy primer and
two coats epoxy finish paint etc. complete.Spec. No. : As per IRC-
67, & M.O.R.T. & H. Circular No. RW/NH-33023/31/88 D.O.III
Dated 2-5-1994
Rigid 5.41 MORTH 805 Providing and constructing Information Pillar of Brick Masonry in MORTH 805 Number NA NA
Pavement C.M. 1:6 of size 2.0 m x 0.23m x 1.0 m with base pedestal of size
2.3 m x 0.35 m x 0.45 m (0.3 m above ground), excavtion in ground
upto 0.4 m, laying 0.15 m thick 80 mm soling,0.10 m thick c.c.
1:3:6, finishing the pedestal and pillar in cement plaster 12 mm
thick in C.M. 1:5 and finishing the pillar with neat cement finish
,applying flat oil paint of approved colour in two coats, including
curing, finishing etc complete.(In Strata other than B.C. Soil) Spec.
No. :As directed by Engineer-in-charge.
Rigid 5.42 MORTH 805 Providing and constructing Information Pillar of Brick Masonry in MORTH 805 Number NA NA
Pavement C.M. 1:6 of size 2.0 m x 0.23 m x 1.0 m with base pedestal of size
2.3 m x 0.35 m x 0.45 m (0.3 m above ground), excavtion in ground
upto 0.52 m, laying 0.15 m thick 80 mm soling, 0.10 m thick c.c.
1:3:6, finishing the pedestal and pillar in cement plaster 12 mm
thick in C.M. 1:5 and finishing the pillar with neat cement finish,
applying flat oil paint of approved colour in two coats, including
curing, finishing etc complete.(In B.C. Soil with 12 mm thick R.C.C.
raft in M-15, including reinforcement) Spec. No. :As directed by
Engineer-in-charge.
Rigid 5.43 MORTH 806 Providing and fixing steel pipe delineators of 10 cm. in diameter MORTH 806 Number NA NA
Pavement and total height of 130 cm, provided with 2 strips of white
retroreflective sheeting of size 5 cm. x 32.5 cm. each fixed
horizontally and 2 strips of red retroreflective sheeting each
having size 5 cm. x 32.5 cm. fixed horizontally at top, with M.S.
round cap having diameter 11 cm. and wire mesh at top (10 guage
thick) and height of wire mesh 15 cm, M.S. hold fast 6 mm thick
with 35 cm. in length, fixing the delineators in C.C. 1:4:8 concrete
block of size 25 cm. x 25 cm. x 45 cm. with necessary excavation
etc. complete.
unit) unit)
Rigid 5.44 MORTH 801 Providing and fixing Mandatory/Cautionary sign boards in MORTH 801 Square NA NA
Pavement circular/Triangular/ Octagonal shape having maximum size Meter
dimension not more than 600mm made out of 1.5mm aluminum
sheet bonded with white retro reflective sheeting of Class A (
Engineering Grade sheeting) having pressure sensitive/heat
activated adhesive retoreflective specified back ground, border
and back side retoreflctive symbols, letters, numerals, arrow as
per IRC:67-2012 Table No 8.3, supported on one no. of M. S.
angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
painted with with flat oil paint having alternate black and white
bands of 25 cm width including G.I. fixtures etc; fixing the boards
in M25 grade concrete block of size 60cm X 60cm X 75cm
including transportation etc; complete. Class A ( Engineering
Grade sheeting) shall have 5 years written warranty from the
manufacturer & authorised distributor/convertor issued for field
performance including the screen printed areas and cut-out
sheeting and cut-out durable transparent overlay film and this
warranty certificate in original should be submitted to the
dimension not more than 600mm made out of 1.5mm aluminum
sheet bonded with white retro reflective sheeting of Class B ( Type
IV High intensity micro-prismatic grade sheeting-HIP) having
pressure sensitive/heat activated adhesive retoreflective specified
back ground, border and back side retoreflctive symbols, letters,
numerals, arrow as per IRC:67-2012 Table No 8.3 supported on
one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm,
3.45 m long, duly painted with with flat oil paint having alternate
black and white bands of 25 cm width including G.I. fixtures etc;
fixing the boards in M25 grade concrete block of size 60cm X 60cm
X 75cm including transportation etc; complete. Class B ( Type IV
High intensity micro-prismatic grade sheeting-HIP) shall have 7
years written warranty from the manufacturer & authorised
distributor/convertor issued for field performance including the
screen printed areas and cut-out sheeting and cut-out durable
transparent overlay film and this warranty certificate in original
should be submitted to the Engineer in charge by the
contractor/supplier.
dimension not more than 600mm and required area less than 0.90
sqm made out of 1.5mm aluminum sheet bonded with white retro
reflective sheeting of Class C ( Type XI Micro prismatic grade
sheeting) having pressure sensitive/heat activated adhesive
retoreflective specified back ground, border and back side
retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012
Table No 8.3 supported on one no. of M. S. angle iron post of size
65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat
oil paint having alternate black and white bands of 25 cm width
including G.I. fixtures etc; fixing the boards in M25 grade concrete
block of size 60cm X 60cm X 75cm including transportation etc;
complete. Class C ( Type XI Micro prismatic grade sheeting)
sheeting shall have 10 years written warranty from the
Engineer in charge by the contractor/supplier.
unit) unit)
dimension not more than 600mm made out of 3mm aluminum
composite material ( ACM) sheet bonded with white retro
reflective sheeting of Class A ( Engineering Grade sheeting) having
X 75cm including transportation etc; complete. Class A (
Engineering Grade sheeting) shall have 5 years written warranty
from the manufacturer & authorised distributor/convertor issued
for field performance including the screen printed areas and cut-
out sheeting and cut-out durable transparent overlay film and this
reflective sheeting of Class B ( Type IV High intensity micro-
prismatic grade sheeting-HIP) having pressure sensitive/heat
per IRC:67-2012 Table No 8.3 supported on one no. of M. S. angle
iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly
including transportation etc; complete. Class B ( Type IV High
intensity micro-prismatic grade sheeting-HIP) shall have 7 years
written warranty from the manufacturer & authorised
Rigid 5.49 MORTH 801 contractor/supplier.
Providing and fixing Mandatory/Cautionary sign boards in MORTH 801 Square NA NA
unit) unit)
dimension more than 600mm made out of 2mm aluminum sheet
bonded with white retro reflective sheeting of Class A (
including transportation etc; complete. Class A ( Engineering
dimension more than 600mm and made out of 2mm aluminum
X 75cm including transportation etc; complete. Class B ( Type IV
High intensity micro-prismatic grade sheeting-HIP) shall have 7
Rigid 5.52 MORTH 801 contractor/supplier.
Providing and fixing Mandatory/Cautionary sign boards in MORTH 801 Square NA NA
dimension more than 600mm and made out of 2mm aluminum
sheet bonded with white retro reflective sheeting of Class C ( Type
XI Micro prismatic grade sheeting) having pressure sensitive/heat
including transportation etc; complete. Class C ( Type XI Micro
prismatic grade sheeting) sheeting shall have 10 years written
warranty from the manufacturer & authorised
unit) unit)
dimension more than 600mm made out of 4mm aluminum
X 75cm including transportation etc; complete. Class A (
Engineering Grade sheeting) shall have 5 years written warranty
from the manufacturer & authorised distributor/convertor issued
for field performance including the screen printed areas and cut-
out sheeting and cut-out durable transparent overlay film and this
including transportation etc; complete. Class B ( Type IV High
intensity micro-prismatic grade sheeting-HIP) shall have 7 years
unit) unit)
Rigid 5.56 MORTH 801 Providing and fixing of retro- reflectorised cautionary, mandatory MORTH 801 Square NA NA
Pavement and informatory sign board rectangular/Square in shape having Meter
area less than 0.9 square meter made out of 2mm aluminum
per IRC:67-2012 Table No 8.3, supported with back support
frame 25mm x 25mm x 3mm, duly painted on back side with two
coats of grey stove enamel paint & supported on one no. mild
steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly
fixed to the ground by means of properly designed foundation
with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm
below ground level as per approved drawing The angle iron post
shall be duly painted with one coat of epoxy primer and two coats
of epoxy finish paints having alternate black and white bands of 25
cm width including GI fixures and transportation etc.complete.The
nut bolts of board with angle iron post/supporting structure after
numerals, arrow as per IRC:67-2012 Table No 8.3, supported with
back support frame 25mm x 25mm x 3mm, duly painted on back
side with two coats of grey stove enamel paint & supported on
one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt
long firmly fixed to the ground by means of properly designed
foundation with M25 grade cement concrete 45 cm x 45 cm x 60
cm, 60 cm below ground level as per approved drawing The angle
iron post shall be duly painted with one coat of epoxy primer and
two coats of epoxy finish paints having alternate black and white
bands of 25 cm width including GI fixures and transportation
etc.complete.The nut bolts of board with angle iron
post/supporting structure after fixing at site has to be electrically
welded. Class B ( Type IV High intensity micro-prismatic grade
sheeting-HIP) sheeting shall have 7 years written warranty from
the manufacturer & authorised distributor/convertor issued for
field performance including the screen printed areas and cut-out
fixing at site has to be electrically welded. Class C ( Type XI Micro
unit) unit)
one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt
welded. Class A ( Engineering Grade sheeting) shall have 5 years
fixing at site has to be electrically welded. Class B ( Type IV High
intensity micro-prismatic grade sheeting-HIP) sheeting shall have
7 years written warranty from the manufacturer & authorised
unit) unit)
Table No 8.3, supported with back support frame 25mm x 25mm
x 3mm, duly painted on back side with two coats of grey stove
enamel paint & supported on one no. mild steel angle iron post 75
mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by
means of properly designed foundation with M25 grade cement
concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per
approved drawing The angle iron post shall be duly painted with
one coat of epoxy primer and two coats of epoxy finish paints
having alternate black and white bands of 25 cm width including
GI fixures and transportation etc.complete.The nut bolts of board
with angle iron post/supporting structure after fixing at site has to
be electrically welded. Class C ( Type XI Micro prismatic grade
sheeting) sheeting shall have 10 years written warranty from the
area more than 0.9 square meter made out of 2mm aluminum
coats of grey stove enamel paint & supported on two no. mild
fixing at site has to be electrically welded. Class A ( Engineering
unit) unit)
area greater than 0.9 square meter made out of 2mm aluminum
two no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt
fixing at site has to be electrically welded. Class C ( Type XI Micro
unit) unit)
two no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt
welded. Class A ( Engineering Grade sheeting) shall have 5 years
fixing at site has to be electrically welded. Class B ( Type IV High
intensity micro-prismatic grade sheeting-HIP) sheeting shall have
7 years written warranty from the manufacturer & authorised
unit) unit)
Table No 8.3, supported with back support frame 25mm x 25mm
x 3mm, duly painted on back side with two coats of grey stove
enamel paint & supported on two no. mild steel angle iron post 75
mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by
means of properly designed foundation with M25 grade cement
concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per
approved drawing The angle iron post shall be duly painted with
one coat of epoxy primer and two coats of epoxy finish paints
having alternate black and white bands of 25 cm width including
GI fixures and transportation etc.complete.The nut bolts of board
Rigid 5.68 MORTH 801 Providing and erecting Overhead signs made out of 2mm MORTH 801 Square NA NA
Pavement aluminum sheet bonded with white retro reflective sheeting of Meter
Class A ( Engineering Grade sheeting) having pressure
sensitive/heat activated adhesive retoreflective specified back
ground, border and back side retoreflctive symbols, letters,
numerals, arrow as per IRC:67-2012, with designed back support
frame of mild steel angle with vertical and lateral clearance given
in clause 801 & 802, duly painted on back side with two coats of
grey stove enamel paint and installed as per clause 802.6 over a
designed support system of structural steel work trestles and
trusses of sections and type as per structural design requirements
and approved plans including painting with one coat of epoxy
primer and two coats of epoxy finish paint.The nut bolts of board
be electrically welded. Class A ( Engineering Grade sheeting) shall
have 5 years written warranty from the manufacturer &
authorised distributor/convertor issued for field performance
including the screen printed areas and cut-out sheeting and cut-
out durable transparent overlay film and this warranty certificate
in original should be submitted to the Engineer in charge by the
contractor/supplier.This item does not include the cost of
structural steel work required for support system.
Class B ( Type IV High intensity micro-prismatic grade sheeting-
HIP) having pressure sensitive/heat activated adhesive
retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012,
with designed back support frame of mild steel angle with vertical
and lateral clearance given in clause 801 & 802, duly painted on
back side with two coats of grey stove enamel paint and installed
as per clause 802.6 over a designed support system of structural
steel work trestles and trusses of sections and type as per
structural design requirements and approved plans including
painting with one coat of epoxy primer and two coats of epoxy
finish paint.The nut bolts of board with angle iron post/supporting
structure after fixing at site has to be electrically welded. Class B (
Type IV High intensity micro-prismatic grade sheeting-HIP)
Engineer in charge by the contractor/supplier.This item does not
include the cost of structural steel work required for support
system.
unit) unit)
Class C ( Type XI Micro prismatic grade sheeting) having pressure
sensitive/heat activated adhesive retoreflective specified back
ground, border and back side retoreflctive symbols, letters,
numerals, arrow as per IRC:67-2012, with designed back support
frame of mild steel angle with vertical and lateral clearance given
in clause 801 & 802, duly painted on back side with two coats of
grey stove enamel paint and installed as per clause 802.6 over
designed support system of structural steel work trestles and
trusses of sections and type as per structural design requirements
and approved plans including painting with one coat of epoxy
primer and two coats of epoxy finish paint.The nut bolts of board
Rigid 5.71 MORTH 801 system.
Providing and erecting Overhead signs made out of 4mm MORTH 801 Square NA NA
Pavement aluminum composite material ( ACM) sheet bonded with white Meter
retro reflective sheeting of Class A ( Engineering Grade sheeting)
having pressure sensitive/heat activated adhesive retoreflective
specified back ground, border and back side retoreflctive symbols,
letters, numerals, arrow as per IRC:67-2012, with designed back
support frame of mild steel angle with vertical and lateral
clearance given in clause 801 & 802, duly painted on back side
with two coats of grey stove enamel paint and installed as per
clause 802.6 over a designed support system of structural steel
work trestles and trusses of sections and type as per structural
design requirements and approved plans including painting with
one coat of epoxy primer and two coats of epoxy finish paint.The
fixing at site has to be electrically welded. Class A ( Engineering
Rigid 5.72 MORTH 801 system.
Providing and erecting Overhead signs made out of 4mm MORTH 801 Square NA NA
retro reflective sheeting of Class B ( Type IV High intensity micro-
per IRC:67-2012, with designed back support frame of mild steel
angle with vertical and lateral clearance given in clause 801 & 802,
duly painted on back side with two coats of grey stove enamel
paint and installed as per clause 802.6 over a designed support
system of structural steel work trestles and trusses of sections and
type as per structural design requirements and approved plans
including painting with one coat of epoxy primer and two coats of
epoxy finish paint.The nut bolts of board with angle iron
system.
unit) unit)
retro reflective sheeting of Class C ( Type XI Micro prismatic grade
retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012,
with designed back support frame of mild steel angle with vertical
and lateral clearance given in clause 801 & 802, duly painted on
back side with two coats of grey stove enamel paint and installed
as per clause 802.6 over a designed support system of structural
steel work trestles and trusses of sections and type as per
structural design requirements and approved plans including
painting with one coat of epoxy primer and two coats of epoxy
finish paint.The nut bolts of board with angle iron post/supporting
structure after fixing at site has to be electrically welded. Class C (
Type XI Micro prismatic grade sheeting) sheeting shall have 10
contractor/supplier.This item does not include the cost of
structural steel work required for support system.
Rigid 5.74 MORTH 801 Providing and fixing board displaying information, such as Name of MORTH 801 Number NA NA
Pavement work, Tender cost, Name of Contractor, Work completion and
liability period etc", having rectangular shape of 1.20m x 0.90m
size made out 18 gauge (1.25mm) thick mild steel sheet painted
with one coat of Zinc chromate stoving primer and two coats of
enamel paint on front side and grey stove enamel on back side and
border / messages / symbols etc. with approved colour shade
paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with
properly cross braced M.S. angles of size 35mmx35mmx3mm duly
painted including Two M.S. angle iron posts of size 65 mm x 65
mm x 6 mm, 3.65 m long painted with alternate black and white
bands of 25 cm width including all fixtures etc.and fixing the
boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm
including, excavation, refilling, transportation, and labour etc
complete. Spec. No. As directed by Engineer in Charge "
Rigid 5.75 MORTH 805 Providing and fixing R.C.C. precast cement concrete M-15 MORTH 805 Number NA NA
Pavement pedestal OF SIZE 0.75 X 0.75 X 0.20 m including cost of steel
reinforcement for Km. stone as per detailed drawing and
specification including transportation of pedestal Block, all lifts etc.
complete. Spec. No. : As directed by Engineer-in-charge.
Report Name: e DSR
unit) unit)
Road 6.01 MORTH 409 Providing and casting in situ or precast tapering R.C.C. M-20 Barrier MORTH 409 Running NA NA
Furniture type Kerb without gutter ( as per IRC 86 1983) embedded 125mm Meter
below ground level over M-10 PCC finished neatly with C.M. 1:2,
setting the same in C.M. 1:2, including the required excavation in any
strata and removing the excavated stuff any where in city and redoing
the surface as specified and directed by Engineering In-charge.
Using Concrete Batching and Mixing Plant
Road 6.02 MORTH 409 Providing and casting in situ or precast tapering R.C.C. M-20 Semi MORTH 409 Running NA NA
Furniture Barrier type Kerb without gutter ( as per IRC 86 1983) embedded Meter
125mm below ground level over M-10 PCC finished neatly with C.M.
1:2, setting the same in C.M. 1:2, including the required excavation in
any strata and removing the excavated stuff any where in city and
redoing the surface as specified and directed by Engineering In-
charge. Using Concrete Batching
and Mixing Plant
Road 6.03 MORTH 409 Providing and casting in situ or precast tapering R.C.C. M-20 MORTH 409 Running NA NA
Furniture Mountable type Kerb without gutter ( as per IRC 86 1983) embedded Meter
charge. Using Concrete Batching
and Mixing Plant
Road 6.04 MORTH 409 Providing and casting in situ or precast tapering R.C.C. M-20 Barrier MORTH 409 Running NA NA
Furniture type Kerb with gutter ( as per IRC 86 1983) embedded 125mm below Meter
ground level over M-10 PCC finished neatly with C.M. 1:2, setting the
same in C.M. 1:2, including the required excavation in any strata and
removing the excavated stuff any where in city and redoing the
surface as specified and directed by Engineering In-charge.
Road 6.05 MORTH 409 Providing and casting in situ or precast tapering R.C.C. M-20 Semi MORTH 409 Running NA NA
Furniture Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125mm Meter
below ground level over M-10 PCC finished neatly with C.M. 1:2,
setting the same in C.M. 1:2, including the required excavation in any
strata and removing the excavated stuff any where in city and redoing
the surface as specified and directed by Engineering In-charge.
Road 6.06 MORTH 409 Providing and casting in situ or precast tapering R.C.C. M-20 MORTH 409 Running NA NA
Furniture Mountable type Kerb with gutter ( as per IRC 86 1983) embedded Meter
charge. Using Concrete Batching and
Mixing Plant
Road 6.07 MORTH Providing and fixing in position Guard Railing as per Drg. No. 15 Type C MORTH 2703 Running 1799 177
Furniture 2703 dt. 20-4-79, with 3 rows of 50mm dia. G.I. pipe 30cm a part and fixed Meter
in M.S. channels of section 125 x 65 x 6 mm spaced 2.5 C/c 1:2:4 c.c.
bedding of size 45 x 30cm. as per detailed drawing, with 3 coats of
approved yellow and black paint including necessary excavation in any
strata.
Road 6.08 MORTH Providing and fixing in position Guard Railing as per Drg. No. 15 Type C MORTH 2703 Running 1726 227
Furniture 2703 dt. 20-4-79, with 3 rows of 40mm dia. G.I. pipe 30cm a part and fixed Meter
in M.S. channels of section 100 x 50 x 6 mm spaced 2.5 C/c 1:2:4 c.c.
bedding of size 45 x 30 x 30cm. as per detailed drawing, with 3 coats
of approved of yellow and black paint including necessary excavation
in any strata.
Road 6.09 MORTH Providing and fixing Guard Railing of 1000mm height as per Type D MORTH 2703 Running 1678 189
Furniture 2703 Drg. No. 15 dt. 20-4-79, and fixed in 40 x 40 x 6mm iron, angle Meter
embedded in 1:2:4 cement concrete bedding patti as per detailed
drawing, with 3 coats of approved of yellow and black paint.
Road 6.1 MORTH Providing and fixing Guard Railing of 1000 mm height in 25mm M.S. MORTH 2703 Running 1657 235
Furniture 2703 square bars 100 mm C/c. as per Type drawing No. 6 dt. 20-8- 85 and Meter
fixed in 50mm x 50mm x 6mm iron angle embedded in 1:2:4 C.C.
bedding 55 x 45 cm and 50 x 6 iron patti as per detailed drawing with
3 coats of approved yellow and black paint.
Road 6.11 MORTH Design of overlay for existing B.T. surface with carrying out testing by MORTH Kilometer 7135 500
Furniture Benkelman Beam method as per guide lines in IRC 81:1997 including
design & testing at site. The charges for transportation of Benkelman
Beam, loaded truck, labour for testing and traffic control are not
included. Rate as per Highway Research Division No. 1 M.E.R.I., Nashik
-4
unit) unit)
Road 6.12 MORTH Carrying out roughness index / road unevenness test with car MORTH Kilometer 640 NA
Furniture mounted / jeep towed ARUR machine (Automatic road unevenness
Recorder) Calibrated from C.R.R.I. New Delhi (Central Road Research
Institute) or any other equivalent authority including taking
observations, feeding data and giving computerized test result
including hire charges of all machinery and labour completed. i) Road
surface single lane (B.T./W,B.M.) 3.75 m Wirdth. Rate as per Highway
Research Division No. 1 M.E.R.I., Nashik -4
Road 6.13 MORTH Carrying out roughness index / road unevenness test with car MORTH Kilometer 1280 NA
surface single lane (B.T./W,B.M.) 5.5 m to 7.00 m. Wirdth. Rate as
per Highway Research Division No. 1 M.E.R.I., Nashik -4
Road 6.14 MORTH Carrying out roughness index / road unevenness test with car MORTH Kilometer 640 48
surface single lane (B.T./W,B.M.) Each additional lane Width. Rate as
per Highway Research Division No. 1 M.E.R.I., Nashik -4
Road 6.15 MORTH Dead Journey charges for Transportation of machine/ vehical for MORTH Kilometer 15 1
Furniture Carrying out roughness index / road unevenness test with car
mounted / jeep towed ARUR machine (Automatic road unevenness
including hire charges of all machinery and labour completed. Spec.
No. : As directed by Engineer in charge.
Road 6.16 MORTH 701 Providing and laying a woven Polypropylene Geotextile of Type-I MORTH 701 Square 131 26
Furniture manufactured from black UV stabilised Polypropylene Tape yarn on Meter
the prepared subgrade as the separator cum reinforcement with
necessary overlap as per drawing
Road 6.17 MORTH 701 Providing and laying a woven Polypropylene Geotextile of Type-II MORTH 701 Square 120 24
Road 6.18 MORTH 701 Providing and laying a woven Polypropylene Geotextile of Type-III MORTH 701 Square 109 22
Road 6.19 MORTH 701 Providing and laying a fibre glass geogrid of Tensile strength 50 kN/m MORTH 701 Square 132 27
Furniture manufactured from high quality glass fibre strands and coated with a Meter
polymer modified bitumen as reinforcement to Asphalt overlay
flexible pavements and Asphalt over distressed rigid P.C.C.
Road 6.2 MORTH 701 Providing and laying a fibre glass geogrid of Tensile strength 100 kN/m MORTH 701 Square 214 48
Furniture manufactured from high quality glass fibre strands and coated with a Meter
polymer modified bitumen as reinforcement to Asphalt overlay
flexible pavements and Asphalt over distressed rigid P.C.C.
Road 6.21 MORTH Providing and Constructing gabion structure 1 Meter high or required MORTH 2503 Cubic 970 130
Furniture 2503 section made up of soft mechanically woven hexagonal shaped G.I. Meter
wire confirming to IS 16014:2012 having zinc plus PVC coating of
overall diameter of 3.7 mm and tying lacing wire of 3.2 mm with edge
wire confirming to overall diameter 4.4 mm edges being mechanically
selvedge including placing in position, fitting neatly with trap stone
rubble (15 to 23 cm) all loose ends to be securely tied (Excluding
transportation) etc. complete. ( In Dry condition and for under water
installation extra cost to be considered)
Road 6.22 MORTH Providing and Constructing gabion structure 0.50 Meter high or MORTH 2503 Cubic 2630 450
Furniture 2503 required section made up of soft mechanically woven hexagonal Meter
shaped G.I. wire confirming to IS 16014:2012 having zinc plus PVC
coating of overall diameter of 3.7 mm and tying lacing wire of 3.2 mm
with edge wire confirming to overall diameter 4.4 mm edges being
mechanically selvedge including placing in position, fitting neatly with
trap stone rubble (15 to 23 cm) all loose ends to be securely tied
(Excluding transportation) etc. complete.( In Dry condition and for
under water installation extra cost to be considered)
unit) unit)
Road 6.23 MORTH 701 Providing and laying Needle Punched and mechanically bonded non MORTH 701 Square 123 39
Furniture woven Geotextile of Type III indigenously manufactured from high Meter
quality Propylene staple fibers (continuous filament will not be
accepted) on the prepared subgrade for Seperation.
Road 6.24 MORTH 701 Providing and laying Needle Punched and mechanically bonded non MORTH 701 Square 130 35
Furniture woven Geotextile of Type II indigenously manufactured from high Meter
quality Propylene staple fibers (continuous filament will not be
accepted) on the prepared subgrade for Seperation.
Road 6.25 MORTH 202 Removal of telephone / Electric poles including excavation and MORTH 202 Number 159 128
Furniture dismantling of foundation concrete and lines under the supervision of
concerned department, disposal with all lifts and up to a lead of 1000
metres and stacking the serviceable and unserviceable material
separately
Road 6.26 MORTH 303 Carrying out excavation in hard rock up to depth 200mm. to achieve a MORTH 303 Square 116 15
Furniture specified slope of the rock face by controlled use of explosives and Meter
blasting accessories in properly aligned and spaced drill holes,
collection of the excavated rock by a 80 HP dozer, loading in tipper by
a front end loader and disposing of the material with all lifts and lead
upto 1000 m, all as specified in clause No. 303
Road 6.27 MORTH 408 Construction of Median and Island with Soil Taken from Roadway MORTH 408 Cubic 209 87
Furniture Cutting -- Construction of Median and Island above road level with Meter
approved material deposited at site from roadway cutting and
excavation for drain and foundation of other structures, spread,
graded and compacted as per clause 407
Road 6.28 MORTH 408 Construction of Median and Island with Soil Taken from Borrow Areas - MORTH 408 Cubic 237 62
Furniture - Construction of median and Island above road level with approved Meter
material brought from borrow pits, spread, sloped and compacted as
per clause 407
Road 6.29 MORTH 410 Footpaths and Separators -- Construction of footpath/separator by MORTH 410 Cubic 577 36
Furniture providing a 150 mm compacted granular sub base as per clause 401 Meter
and 25 mm thick cement concrete grade M15, over laid with pre-cast
concrete tiles in cement mortar 1:3 including provision of all drainage
arrangements but excluding kerb channel.
Road 6.3 MORTH 811 Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier MORTH 811 Running 2600 113
Furniture (Providing and erecting a W "metal beam crash barrier comprising of 3 Meter
mm thick corrugated sheet metal beam rail, 70 cm above road/ground
level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm
spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road
level, all steel parts and fitments to be galvanised by hot dip process,
all fittings to conform to IS:1367 and IS:1364, metal beam rail to be
fixed on the vertical post with a spacer of channel section 150 x 75 x 5
mm, 330 mm long complete as per clause 810)"
Road 6.31 MORTH 811 Metal Beam Crash Barrier -- Type - B, THRIE : Metal Beam Crash MORTH 811 Running 3881 140
Furniture Barrier (Providing and erecting a Thrie " metal beam crash barrier Meter
comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm
above road/ground level, fixed on ISMC series channel vertical post,
150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m
below ground level, all steel parts and fitments to be galvanised by hot
dip process, all fittings to conform to IS:1367 and IS:1364, metal beam
rail to be fixed on the vertical post with a space of channel section 150
x 75 x 5 mm, 546 mm long complete as per clause 810)"
Road 6.32 MORTH 811 Flexible Crash Barrier, Wire Rope Safety Barrier (Providing and MORTH 811 Running 1940 84
Furniture erecting a wire rope safety barrier with vertical posts of medium Meter
weight RS Joist (ISMB series) 100 mm x 75 mm (11.50 kg/m), 1.50 m
long 0.85 m above ground and 0.65 m below ground level, split at the
bottom for better grip, embedded in M 15 grade cement concrete 450
x 450 x 450 mm, 1.50 m center to center and with 4 horizontal steel
wire rope 40 mm dia and anchored at terminal posts 15 m apart.
Terminal post to be embedded in M 15 grade cement concrete
foundation 2400 x 450 x 900 mm (depth), strengthened by a strut of
RS joist 100 x 75 mm, 2 m long at 450 inclination and a tie 100 x 8 mm,
1.50 m long at the bottom, all embedded in foundation concrete as
per approved design and drawing, rate excluding excavation and
cement concrete.)
Road 6.33 MORTH 801 Anti - Glare Screen with 25 mm steel pipe framework fixed with MORTH 801 Running 3025 45
Furniture circular and rectangular vans (Providing and erecting an anti - glare Meter
screen with 25 mm dia vertical pipes fabricated and framed in the
form of panels of one metre length and 1.75 mtr height fixed with
circular vane 250 mm dia at top and rectangular vane 600 x 300 mm at
the middle, made out of steel sheet of 3 mm thickness, end vertical
pipes of the panel made larger for embedding in foundation concrete,
applying 2 coats of paint on all exposed surfaces, all as per approved
design and drawings.)
unit) unit)
Road 6.34 MORTH 801 Anti - Glare Screen with Rectangular Vane of MS sheet (Providing and MORTH 801 Running 775 27
Furniture erecting anti - glare screen with rectangular vanes of size 750 x 500 Meter
mm made from MS sheet, 3 mm thick and fixed on MS angle 50 x 50 x
6 mm at an angle of 450 to the direction of flow of traffic, 1.5 m
center to center, top edge of the screen 1.75 m above ground level,
vertical post firmly embedded in cement concrete foundation 0.60 m
below ground level, applying 2 coats of paint on exposed faces, all
complete as per approved design and drawings)
Road 6.35 MORTH Providing Reinforced cement concrete crash barrier at the edges of MORTH Running NA NA
Furniture 2703/811 the road, approaches to bridge structures and medians, constructed 2703/811 Meter
with R.C.C. M 20 Grade concrete with HYSD reinforcement
conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at
expansion joints filled with pre-moulded asphalt filler board, keyed to
the structure on which it is built and installed as per design given in
the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated
24 June 1994 as per dimensions in the approved drawing and at
locations directed by the Engineer, all as specified etc. complete. Spec:
MORT & H 2013 Cl 811 Page No 360
Report Name: e DSR
Date Of Printing: 05-05-
Chapter Item Reference No. Description of the item Additional Unit State DSR State DSR
No. Specification (Completed (Labour Rate
unit) unit)
Road Miscellaneous 7.01 MORTH 3004 Labour for filling pot holes with premix asphalt chips, cleaning MORTH 3004 Square 48 48
items the road surface with wire brushes & gunny bags, applying tack Meter
coat, spreading mixture hand ramming or light compaction with
power roller conveying material to the site of work (excluding
cost and of material fuel & heating asphalt) etc complete.
Road Miscellaneous 7.02 MORTH 3004 Labour for metal patch repairs including preparing surface, MORTH 3004 Square 35 35
items adding required quantity of metal, murum, watering, ramming Meter
etc complete. Spec.No.: As directed by Engineer- in-charge.
(excluding cost and of material )
Road Miscellaneous 7.03 MORTH 3002 Restoration of rain cuts with soil, murum gravel or a mixture of MORTH 3002 Cubic 450 108
items these, clearing the loose soil, benching for 300mm width laying Meter
fresh material in layers not exceeding 250 mm and compaction
with plate compactor or power rammer to restore the original
alignment, level and slopes as per drawings and MORTH
specification clause 3002
Road Miscellaneous 7.04 MORTH 3003 Making up loss of material/irregularities on shoulders to the MORTH 3003 Square 103 24
items design level by adding fresh approved selected soil and Meter
compacting it with appropriate equipment at OMC as per
MORTH specification clause 3003
Road Miscellaneous 7.05 MORTH 3003 Stripping excess soil from the shoulder surface to achieve the MORTH 3003 Square 23 13
items approved level and compacting with plate compactor at OMC as Meter
per drawings as per MORTH specification clause 3003
Road Miscellaneous 7.06 MORTH 3004 Repair to pot holes by removal of failed material, trimming the MORTH 3004 Cubic 7009 1150
items sides to vertical and levelling the bottom, cleaning the same with Meter
compressed air or any appropriate method filled with 75mm
B.M, applying bitumen tack coat at the bottom and vertical sides
as per as per MORTH specification clause 3004.1 & 3004.2
Road Miscellaneous 7.07 MORTH 3004 Patch repair on already filled pot holes with 20 mm premix MORTH 3004 Square 216 42
items carpet and seal coat as per MORTH specification clause 3004.1 Meter
& 3004.2
Road Miscellaneous 7.08 MORTH 3004 Repair to pot holes and removal of loose material, trimming of MORTH 3004 Square 241 54
items sides, cleaning of surface by providing tack coat, 20 mm thick pre- Meter
mix carpet and seal coat as per MORTH specification clause
3004.1 & 3004.2
Road Miscellaneous 7.09 MORTH 3004 Maintenance of gravel road including making up the loss of MORTH 3004 Square 105 1.5
items profile, rectifying corrugated surface, filling up of depressions, Meter
pot holes and erosion gullies by adding fresh material and
compacting it with appropriate equipment or to strip excess of
material from the road surface as per drawings etc complete
Road Miscellaneous 7.1 RD Providing pick and roll surface by picking the old WBM surface As Directed by Square NA NA
items to the required standard, adding 30% of 40mm size metal and Engineer In Charge Meter
required quantity of murum including laying sectioning,
watering, compacting with static roller with thin layer of murum
blindage on carrageway, watering and compacting by static
roller, including cost of all materials, loading, unloading, stacking
and labour etc. complete. Spec.No. : As directed by Engineer- in-
charge.
Road Miscellaneous 7.11 RD Maintenance of WBM road including filling up of pot holes, ruts As Directed by Square 135 2.5
items and rectifying corrugated surface, damaged edges and ravelling Engineer In Charge Meter
etc. complete
Road Miscellaneous 7.12 RD The maintenance of drains include erosion, repair, clearing, As Directed by Running 4 4
items cleaning, reshaping, regrading, deepening of side drains as well Engineer In Charge Meter
as catch water drains etc. complete
Road Miscellaneous 7.13 RD Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, As Directed by Number 1820 728
items Erosion repair, repairs to cracks, parapet wall and protection Engineer In Charge
work as per drawing etc. complete
Road Miscellaneous 7.14 RD Maintenance of road signs by way of cleaning and repainting of As Directed by Kilomet 1675 793
items mandatory / requlatory / cautionary / informatory and place Engineer In Charge er
identifications sign board as per drawings etc. complete
Road Miscellaneous 7.15 RD Maintenance of Kilometer stones, & 200 metre by way of refiting As Directed by Kilomet 200 NA
items of tilted stones repairing with cement mortar, cleaning, repairing Engineer In Charge er
and lettering on 200 metre km stone and 5th km stone etc.
complete
Road Miscellaneous 7.16 RD Cutting of branches of trees and shrubs from the road way or As Directed by Number 165 165
items with in R.O.W including disposal of wood and leaves to suitable Engineer In Charge
location etc. complete
Road Miscellaneous 7.17 RD Trimming of grass, shurbs and weeds from the shoulders/berms As Directed by Square 3.5 3.5
items and disposing off the same to suitable locations etc. complete Engineer In Charge Meter
Chapter Item Reference No. Description of the item Additional Unit State DSR State DSR
unit) unit)
Road Miscellaneous 7.18 RD Maintenance of guard stones/ boundry stones/ indicator stones As Directed by Kilomet 510 265
items by way of refiting of tilted stones repairing with cement mortar, Engineer In Charge er
cleaning, repairing and white washing etc. complete
Road Miscellaneous 7.19 RD Repair of steel railing to bring it to original shape cleaning and As Directed by Running 269 33
items repainting as per drawing etc. complete Engineer In Charge Meter
Road Miscellaneous 7.2 RD Repair of RCC railing to bring it to the original shape, cleaning As Directed by Running 185 16
items and repainting as per drawings etc. complete Engineer In Charge Meter
Road Miscellaneous 7.21 RD Removal of steel railing and refixing of railing to submersible As Directed by Running 235 155
items bridges including cleaning and repainting etc complete Engineer In Charge Meter
Road Miscellaneous 7.22 RD White washing two coats on parapet walls and white washing As Directed by Square 16 10
items and geru lime painting to tree trunks including preparation of Engineer In Charge Meter
surface by cleaning scraping etc. complete
Road Miscellaneous 7.23 RD Dressing of side shoulder / Scrapping the road side shoulder by As Directed by Square NA NA
items Mechanical means ( By JCB /DOUZER) including excavation of Engineer In Charge Meter
raised side shoulders upto 15cm depth including remooving
/cutting bushes,grass and dressing shoulder to desired camber
and disposing of excavated stuff up to road boundary etc
complete. as directed by Engineer In Charge.
Road Miscellaneous 7.24 MORTH Providing and Laying Pressure Sensitive Technology ( PST ) based As Directed by Square NA NA
items Insstapattch ready mix compound for repair potholes, Engineer In Charge Meter
manufactured from aggregates of 4-12 mm, treated with special
grade bitumen, Pressure Sensitive Polymer( PSP) and Cross
Linking Chemical (CLC) agents etc, technically evaluated for
repairs on bitumenous/concrete surfaces, confirming to CRRI &
IRC accreduted norms for pressure sensitive polymer products
for repairs of Potholes on road/ Pavements, havinfg upto 25mm
thick insstapattch layer on base of compacted aggregates (
Crusher Brocken ) of 50mm thickness including labours, material,
tools and tampering etc complete.
Road Miscellaneous 7.25 MORTH 514 Providing, laying and rolling Micro seal surfacing ( 10 mm thick ) MORTH 514 Square NA NA
items for preventive maintainance including supplying all materials , Meter
preparing the existing road surface , heating bitumen ,
aggregates , lime in hot mix plant , laying the mix seal surfacing
by paver finisher and compaction by power roller etc complete.(
Using 60/70 bulk bitumen for mixing and tack coat over black
topped surface by using 0.14 Cum per 10 Sqm. of crusher
aggregate passing 100 % through 6.30 mm sieve and
retained100 % on 0.075 mm size sieve 0.2 Kg / Sqm lime and
11.00 kg / 10 Sqm bulk bitumen for fixing and 0.50 kg / Sqm for
tack coat ) Spec: As directed by Engineer In Charge and IRC SP 78
- 2008
Road Miscellaneous 7.26 MORTH 514 Providing, laying and rolling Micro seal surfacing ( 10 mm thick ) MORTH 514 Square NA NA
items for preventive maintainance including supplying all materials , Meter
preparing the existing road surface , heating bitumen ,
aggregates , lime in hot mix plant , laying the mix seal surfacing
by paver finisher and compaction by power roller etc complete.(
Using 60/70 bulk bitumen for mixing and tack coat over black
topped surface by using 0.14 Cum per 10 Sqm. of crusher
aggregate passing 100 % through 9.50 mm sieve and
retained100 % on 0.075 mm size sieve 0.2 Kg / Sqm lime and
9.50 kg / 10 Sqm bulk bitumen for fixing and 0.50 kg / Sqm for
tack coat ) Spec: As directed by Engineer In Charge & IRC SP 78 -
2008
Road Miscellaneous 7.27 MORTH 408 Providing and laying shoulder drain of trap rubble of 0.45 x 0.45 MORTH 408 Running NA NA
items meter section at 45 degree angle to the road edge including Meter
hand packing, filling voids with sand/shingle of approved quality
and ramming etc. complete as desired.
Report Name: e DSR
Chapter Item No. Reference Description of the item Additional Unit State DSR State DSR
Rate In Rs. per In Rs. per unit)
unit)
Cross Drainage 11.01 CD 1 Providing rubble filling of trap/ granite/ quartzite gneiss stones for CD.1 Page.No. Cumt 489 72
Works foundations including hand packing filling gravel / sand in the voids 159
etc. complete.
Cross Drainage 11.02 CD 3A Providing and laying in situ cement concrete of M10 proportion CD.-3 Page.No. Cumt 3590 866
Works with trap/ granite/ quartzite/ gneiss metal in foundation including 160
necessary form work, compacting and curing etc. complete. (with
reversible drum rtype mixer with SCADA with natural sand)
Cross Drainage 11.03 CD 3A Providing and laying in situ cement concrete of M10 proportion CD.-3 Page.No. Cumt 3451 866
reversible drum rtype mixer with SCADA with crushed sand)
Cross Drainage 11.04 CD 3B Providing and laying in situ cement concrete of 1:4:8 proportion CD.3 Page.No. Cumt 3380 1034
reversible drum rtype mixer with SCADA with natural sand)
Cross Drainage 11.05 CD 3B Providing and laying in situ cement concrete of 1:4:8 proportion CD.3 Page.No. Cumt 3230 1034
reversible drum rtype mixer with SCADA with crushed sand)
Cross Drainage 11.06 CD 4 Providing rubble stone paving 15cm thick in 1:3 cement mortar CD.4 Page.No. Cumt 746 211
Works over a bedding of 15cm thick cement concrete of 1:4:8 proportion 160
with trap /granite /quartzite /gneiss metal including striking joints
and watering etc. complete.
Cross Drainage 11.07 CD 6 Providing uncoursed rubble trap /quartzite /gneiss stone CD.6 Page.No. Cumt 1804 450
Works masonary in cement mortar 1:5 for piers, abutments, wings, 162
returns, head-walls, parapet etc. including bailing out of water,
striking joints of the non exposed faces, pointing the exposed faces
with cement mortar 1:3, scaffolding, watering to masonary and
etc. complete.
Cross Drainage 11.08 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-2 CD.7 Page.No. Cumt 33 NA
Works class of 450mm diameter in proper line, level and slope including 162
providing and fixing collars in cement mortar 1:2 and curing etc.
complete.
Cross Drainage 11.09 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-2 CD.7 Page.No. Cumt 409 265
complete.
complete.
complete.
complete.
complete.
complete.
complete.
complete.
complete.
complete.
unit)
Cross Drainage 11.19 CD 7 Providing and laying cement concrete pipe of IS 458:2003 NP-4 CD 7 Page 167 Cumt 697 217
Works class of 900mm diameter in proper line, level and slope including
complete.
complete.
complete.
Cross Drainage 11.22 CD 8 Providing cast in situ block of M10 cement concrete with circular CD.8 Page.No. Cumt 4745 1911
Works or other shaped opening for waterway including necessary 163
formwork, compaction, finishing and curing etc. complete. (with
reversible drum type mixer with SCADA with natural sand, cement
4.05 bags/cumt)
Cross Drainage 11.23 CD 8 Providing cast in situ block of M10 cement concrete with circular CD.8 Page.No. Cumt 4606 1911
Works or other shaped opening for waterway including necessary 163
formwork, compaction, finishing and curing etc. complete. (with
reversible drum type mixer with SCADA with crushed sand, cement
4.05 bags/cumt)
Cross Drainage 11.24 CD 27 Providing selected hard murum filling including laying in layers of CD.14 Page.No. Cumt 165 58
Works 15 to 20cmwith watering and compacting etc. complete. 167
Cross Drainage 11.25 CD Providing and laying in situ M15 cement concrete of trap /granite CD.15 Page.No. Cumt 4082 1026
Works /quartzite /gneiss metal for approach slab including compacting, 168 and B.7.
finishing, curing etc. complete. (excluding reinforcement) (with Page No. 38
reversible drum type mixer with SCADA with natural sand, cement
5.90 bags/cumt)
Cross Drainage 11.26 CD Providing and laying in situ M15 cement concrete of trap /granite CD.15 Page.No. Cumt 4470 1026
Works /quartzite /gneiss metal for approach slab including compacting, 168 and B.7.
finishing, curing etc. complete. (excluding reinforcement) (with Page No. 38
reversible drum type mixer with SCADA with crushed sand, cement
5.90 bags/cumt)
Cross Drainage 11.27 CD 27 Providing and fixing stream lined M15 grade RCC guard stone CD.20 Page.No. Cumt 330 75
Works including mild steel bar reinforcement etc. complete. 169
Cross Drainage 11.28 CD Providing cast in situ M10 grade cement concrete for head walls of CD 8 Page 163 Cumt 3570 429
Works CD work / retaining walls etc. including necessary form work,
compaction, finishing and curing etc. complete. (with reversible
drum type mixer with SCADA with natural sand, cement 4.05
bags/cumt)
Cross Drainage 11.29 CD Providing cast in situ M10 grade cement concrete for head walls of CD 8 Page 163 Cumt 4146 1095
Works CD work / retaining walls etc. including necessary form work,
compaction, finishing and curing etc. complete. (with reversible
drum type mixer with SCADA with crushed sand, cement 4.05
bags/cumt)
Cross Drainage 11.3 CD Providing and casting in situ PCC M15 grade of trap metal for Bd-E-7 Cumt 4106 689
Works coping to head walls / parapet including centering, form work,
compaction and curing etc. complete. (with reversible drum type
mixer with SCADA with natural sand)
Cross Drainage 11.31 CD Providing and casting in situ PCC M15 grade of trap metal for Bd-E-7 Cumt 4823 986
Works coping to head walls / parapet including centering, form work,
compaction and curing etc. complete. (with reversible drum type
mixer with SCADA with crushed sand)
Report Name: e DSR
unit) unit)
Bridge 12.01 BR 3A Excavation for foundation by manual means in earth, soils of all types, BR.3 Page No. Cubic 121 105
Foundation sand, gravel, soft murum including shoring and strutting as necessary 102 Meter
and disposing off excavated stuff as directed etc. complete.
Bridge 12.02 BR 3A Excavation for foundation by mechanical means in earth, soils of all BR.3 Page No. Cubic 103 58
Foundation types, sand, gravel, soft murum including shoring and strutting as 102 Meter
necessary and disposing off excavated stuff as directed etc.
complete.
Bridge 12.03 BR 3B Excavation for foundation by manual means in hard murum including BR.3 Page No. Cubic 148 144
Foundation shoring and strutting as necessary and disposing off excavated stuff 102 Meter
as directed etc. complete.
Bridge 12.04 BR 3B Excavation for foundation by mechanical means in hard murum BR.3 Page No. Cubic 118 63
Foundation including shoring and strutting as necessary and disposing off 102 Meter
excavated stuff as directed etc. complete.
Bridge 12.05 BR 3C Excavation for foundation by manual means in hard murum and BR.3 Page No. Cubic 177 172
Foundation boulders including shoring and strutting as necessary and disposing 102 Meter
off excavated stuff as directed etc. complete.
Bridge 12.06 BR 3C Excavation for foundation by mechanical means in hard murum and BR.3 Page No. Cubic 132 81
Foundation boulders including shoring and strutting as necessary and disposing 102 Meter
off excavated stuff as directed etc. complete.
Bridge 12.07 BR 3D Excavation for foundation by manual means in soft rock including BR.3 Page No. Cubic 324 291
Bridge 12.08 BR 3D Excavation for foundation by mechanical means in soft rock including BR.3 Page No. Cubic 274 100
Bridge 12.09 BR 3E Excavation for foundation in hard rock by blasting including shoring BR.3 Page No. Cubic 525 403
Foundation and strutting as necessary and disposing off excavated stuff as 102 Meter
directed etc. complete.
Bridge 12.1 BR 3E Excavation for foundation in hard rock by controlled blasting BR.3 Page No. Cubic 520 450
Foundation including shoring and strutting as necessary and disposing off 102 Meter
Bridge 12.11 BR 3F Excavation for foundation in hard rock by chiselling and wedging or BR-3 Page No. Cubic 650 563
Foundation line drilling including shoring and strutting as necessary and disposing 102 Meter
off excavated stuff as directed etc. complete. (excluding dewatering)
Bridge 12.12 BR 3G Excavation for foundation in laterite rock including shoring and BR.3 Page No. Cubic 330 296
Foundation strutting as necessary and disposing off excavated stuff as directed 102 Meter
etc. complete.
Bridge 12.13 BR 3G Providing and fixing 25mm diameter steel anchor dowel in hard rock As directed by Number 88 50
Foundation including drilling hole of 32 mm diameter up to 0.75 mtrs depth, Engineer in
placing the dowel in position and effectively grouting the hole with charge.
CM 1:1 proportion etc. complete.
Bridge 12.14 BR 4 A Dewatering for abutments including diversion of stream, providing Br. 4 Page No. Cubic 78 60
Foundation cofferdams, bunds etc. as may be necessary for foundation and other 103 Meter
parts of the work including bailing and pumping out water during and
after excavation as may be necessary etc. complete. (excavation,
bedding, soling, PCC and concreting in all sorts of soil after post
monsoon flow)
Bridge 12.15 BR 4 A Dewatering for piers including diversion of stream, providing Br. 4 Page No. Cubic 110 78
monsoon flow)
Bridge 12.16 BR 4 A Dewatering for returns including diversion of stream, providing Br. 4 Page No. Cubic 60 59
monsoon flow)
Bridge 12.17 BR 4 A Dewatering for rafts and cut off walls including diversion of stream, Br. 4 Page No. Cubic 130 78
Foundation providing cofferdams, bunds etc. as may be necessary for foundation 103 Meter
and other parts of the work including bailing and pumping out water
during and after excavation as may be necessary etc. complete.
(excavation, bedding, soling, PCC and concreting in all sorts of soil
after post monsoon flow)
Bridge 12.18 BR 4 A Dewatering for abutments including diversion of stream, providing Br. 4 Page No. Cubic 561 190
bedding, soling, PCC and concreting in all sorts of soil in perinnial
river)
unit) unit)
Bridge 12.19 BR 4 A Dewatering for piers including diversion of stream, providing Br. 4 Page No. Cubic 855 697
river)
Bridge 12.2 BR 4 A Dewatering for returns including diversion of stream, providing Br. 4 Page No. Cubic 258 110
river)
Bridge 12.21 BR 4 A Dewatering for rafts and cut off walls including diversion of stream, Br. 4 Page No. Cubic 330 690
Foundation providing cofferdams, bunds etc. as may be necessary for foundation 103 Meter
and other parts of the work including bailing and pumping out water
(excavation, bedding, soling, PCC and concreting in all sorts of soil in
perinnial river)
Bridge 12.22 BR 4 B Dewatering on BHP basis by using water pump including diversion of BR 4 Page No Hour 103 94
Foundation stream, providing cofferdams, earthern bunds etc. as may be 104.105
necessary for foundation and other parts of the the works and
pumping out water during and after excavation as may be required by
using 3.0 BHP pump etc. complete. (prior approval of Superintending
Engineer will be necessary)
using 5.0 to 9.0 BHP pump etc. complete. (prior approval of
Superintending Engineer will be necessary)
using 10.0 to 19.0 BHP pump etc. complete. (prior approval of
Bridge 12.25 BR 5A Providing and laying in situ M10 cement concrete of trap/ granite/ BR.5 Page No. Cubic 2926 418
Foundation quartzite/ gneiss metal in foundation including necessary centering, 105 and B.7, Meter
formwork, bailing out water, compacting and curing etc. complete. Page No. 38
(with fully automatic micro processor based PLC with SCADA enabled
with reversible drum type mixer with natural sand)
Bridge 12.26 BR 5A Providing and laying in situ M10 cement concrete of trap/ granite/ BR.5 Page No. Cubic 3502 1000
Foundation quartzite/ gneiss metal in foundation including necessary centering, 105 & B 7 / Meter
formwork, bailing out water, compacting and curing etc. complete. Page No. 38
(with fully automatic micro processor based PLC with SCADA enabled
with reversible drum type mixer with crushed sand)
Bridge 12.27 BR 6 Providing uncoursed rubble stone masonry of trap/ granite/ BR.6 Page No. Cubic 1884 637
Foundation quartzite/ gneiss metal in CM 1:5 for foundation of piers, abutments, 105 Meter
wings etc. including bailing out of water, striking joints, scaffolding
and watering etc. complete.
Bridge 12.28 BR 8 Providing, fabricating, launching, floating and grounding in position BR.8 Page No. Metric 60623 10000
Foundation steel curbs for wells with necessary steel bracings and steel cutting 108 Tonne
edges as shown in the detailed drawings and technical specifications
etc. complete.
Bridge 12.29 BR 9A Providing and laying in situ CC M10 of trap/ granite/ quartzite/ gneiss BR.9 Page No. Cubic 3903 950
Foundation metal in the hollow of the steel curbs including compacting by 109 and B.7, Meter
vibrating and curing etc. complete. (with fully automatic micro Page No.38
processor based PLC with SCADA enabled with reversible drum type
mixer with natural sand)
Bridge 12.3 BR 9A Providing and laying in situ CC M10 of trap/ granite/ quartzite/ gneiss BR.9 Page No. Cubic 3603 950
Foundation metal in the hollow of the steel curbs including compacting by 109 & B 7 / Meter
vibrating and curing etc. complete. (with fully automatic micro Page No. 38
mixer with crushed sand)
Bridge 12.31 BR 10 Providing, fabricating and setting out MS cutting edge for RCC well BR.10 Page Metric 53424 5000
Foundation curbs as per detailed drawings and technical specifications etc. No. 110 Tonne
complete.
Bridge 12.32 BR 13A Providing and laying in situ M20 RCC work with trap/ granite/ BR.13 Page Cubic 4740 477
Foundation quartzite/ gneiss metal in well steining including shuttering, No. 112 and B. Meter
compacting by vibrating, finishing and curing etc. complete. (fully 7, Page No.38
automatic micro processor based PLC with SCADA enabled with
reversible drum type mixer with natural sand, excluding
reinforcement)
Bridge 12.33 BR 13A Providing and laying in situ M20 RCC work with trap/ granite/ BR - 13 Page Cubic 4591 780
Foundation quartzite/ gneiss metal in well steining including shuttering, No. 112 & B Meter
compacting by vibrating, finishing and curing etc. complete. (fully 7/ page no. 38
reversible drum type mixer with crushed sand, excluding
reinforcement)
unit) unit)
Bridge 12.34 BR 13A Providing and laying in situ M25 RCC work with trap/ granite/ BR.13 Page Cubic 5160 780
reinforcement)
Bridge 12.35 BR 13A Providing and laying in situ M25 RCC work with trap/ granite/ BR - 13 Page Cubic 5108 780
Foundation quartzite/ gneiss metal in well steining including shuttering, No. 112 & B Meter
compacting by vibrating, finishing and curing etc. complete. (fully 7/ page no. 38
reinforcement)
Bridge 12.36 BR Providing and laying in situ M20 RCC work with trap/ granite/ BR.13 Page Cubic 5338 780
automatic micro processor based PLC with SCADA enabled concrete
batch mix plant / pan mixer with natural sand, excluding
reinforcement)
Bridge 12.37 BR Providing and laying in situ M20 RCC work with trap/ granite/ BR.5 Page No. Cubic 5150 780
Foundation quartzite/ gneiss metal in well steining including shuttering, 105 Meter
compacting by vibrating, finishing and curing etc. complete. (fully
batch mix plant / pan mixer with crushed sand, excluding
reinforcement)
Bridge 12.38 BR Providing and laying in situ M25 RCC work with trap/ granite/ BR.13 Page Cubic 584400 780
batch mix plant / pan mixer with natural sand, excluding
reinforcement)
Bridge 12.39 BR Providing and laying in situ M25 RCC work with trap/ granite/ BR.9 Page No. Cubic 5160 755
Foundation quartzite/ gneiss metal in well steining including shuttering, 109 Meter
batch mix plant / pan mixer with crushed sand, excluding
reinforcement)
Bridge 12.4 BR 14 Sinking of wells upto 5.0 metres diameter for foundation through all BR.14 Page Running 49665 29309
Foundation strata (except rock) to be removed by grabbing and chiselling soft No. 113 Meter
disintegrated rock including blasting, large scale dewatering, heavy
chiselling, cutting by pneumatic tools, all materials available to sink
through such strata including removal of obstacle and use of
necessary plant and machinery, divers etc. and proper seating of the
wells etc. complete. (depth 0 to 5 metre)
i) Add 30% extra for depth 5 to 10 m
ii) Add 40% extra for depth 10 to 15 m
iii) Add 60% extra for depth 15 to 20 m
iv) Add 100% extra for depth above 20 m
Bridge 12.41 BR 14 Sinking of wells above 5.0 metres and upto 6.0 metres diameter for BR.14 Page Running 71228 56610
Foundation foundation through all strata (except rock) to be removed by No. 113 Meter
grabbing and chiselling soft disintegrated rock including blasting,
large scale dewatering, heavy chiselling, cutting by pneumatic tools,
all materials available to sink through such strata including removal of
obstacle and use of necessary plant and machinery, divers etc. and
proper seating of the wells etc. complete. (depth 0 to 5 metre)
unit) unit)
Bridge 12.44 BR 14 Sinking of wells above 8.0 metres and upto 9.0 metres diameter for BR.14 Page Running NA NA
Bridge 12.45 BR 14 Sinking of wells above 9.0 metres and upto 10.0 metres diameter for BR.14 Page Running NA NA
Bridge 12.46 BR 14 Extra charges for sinking of various diameter of well foundation in BR. 14A Page Cubic 1185 1290
Foundation hard rock encountered during sinking by chiselling in water etc. No. 113 Meter
complete.
Bridge 12.47 BR 16 Providing steel anchor dowel bars of 32 mm diameter and 4 m length BR.16 Page Number 3809 915
Foundation at the base of the well including drilling holes of 60 mm diameter up No. 120
to 2.5 m depth in rock, placing the dowels in position and effectively
grouting the holes with CM 1:1 etc. complete.
Bridge 12.48 BR 16A Providing steel anchor dowel bars of 32 mm diameter and 4 m length BR. 16 Page Number 5450 882
Foundation through steining of the wells including provision of necessary ducts No. 120
through staining, drilling holes of 60 mm diameter up to 2.5 m depth
in rock, placing the dowels in position and effectively grouting the
holes with CM 1:1 etc. complete.
Bridge 12.49 BR 17A Providing and laying in situ M15 CC of trap/ granite /quartzite /gneiss BR.17 Page Cubic 4743 1091
Foundation metal for the bottom plugs of wells in the dry condition including No. 120 and B. Meter
compaction and curing wherever necessary etc. complete. (with fully 7, Page No.38
reversible drum type mixer with natural sand)
Bridge 12.5 BR 17A Providing and laying in situ M15 CC of trap/ granite /quartzite /gneiss BR.17 Page Cubic 4403 1091
reversible drum type mixer with crushed sand)
Bridge 12.51 BR 17B Providing and laying in situ M15 CC of trap/ granite /quartzite /gneiss BR.17 Page Cubic 5009 1091
Foundation metal for the bottom plugs of wells under water including No. 120 and B. Meter
Bridge 12.52 BR 17B Providing and laying in situ M15 CC of trap/ granite /quartzite /gneiss BR.17 Page Cubic 4883 1091
Foundation metal for the bottom plugs of wells under water including No. 120 and B. Meter
unit) unit)
Bridge 12.53 BR Providing and laying in situ M15 CC of trap/ granite /quartzite /gneiss BR.17 Page Cubic 5258 1091
batch mix plant / drum mixer with natural sand)
Bridge 12.54 BR Providing and laying in situ M15 CC of trap/ granite /quartzite /gneiss BR.17 Page Cubic 5073 1091
batch mix plant / drum mixer with crushed sand)
Bridge 12.55 BR 59 a Providing and laying in situ controlled grade of M15 of trap /granite As directed by Cubic 4684 960
Foundation /quartzite /gneiss metal for RCC works in cut off walls / curtain walls Engineer in Meter
including necessary scaffolding, centering, compacting by vibrator, charge.
finishing and curing etc. complete. (with fully automatic micro
mixer with natural sand, excluding reinforcement)
mixer with crushed sand, excluding reinforcement)
Bridge 12.61 BR Providing and laying in situ controlled grade of M15 of trap /granite As directed by Cubic 5173 910
processor based PLC with SCADA enabled concrete batch mix plant /
pan mixer with natural sand, excluding reinforcement)
pan mixer with crushed sand, excluding reinforcement)
unit) unit)
Bridge 12.67 BR Providing islands of earth or approved material for laying steel curb or BR.7. P.No. Number 65041 6215
Foundation cutting edge of well for two lane bridge, depth upto 3 metre in 107
standing water and necessary caging for protection etc. complete.
Bridge 12.68 BR Providing islands of earth or approved material for laying steel curb or BR.7. P.No. Number 100800 29836
Foundation cutting edge of well for single lane bridge, depth upto 3 metre in 107
standing water and necessary caging for protection etc. complete.
Report Name: e DSR
Rate In Rs. In Rs. per unit)
per unit)
Bridge sub 13.01 BR 3A Excavation for foundation by manual means in earth, soils of all BR.3 Page No. Cubic 121 105
structure types, sand, gravel, soft murum including shoring and strutting as 102 Meter
necessary and disposing off excavated stuff as directed etc.
complete.
Bridge sub 13.02 BR 3A Excavation for foundation by mechanical means in earth, soils of BR.3 Page No. Cubic 103 58
structure all types, sand, gravel, soft murum including shoring and strutting 102 Meter
as necessary and disposing off excavated stuff as directed etc.
complete.
Bridge sub 13.03 BR 3B Excavation for foundation by manual means in hard murum BR.3 Page No. Cubic 148 144
structure including shoring and strutting as necessary and disposing off 102 Meter
Bridge sub 13.04 BR 3B Excavation for foundation by mechanical means in hard murum BR.3 Page No. Cubic 118 63
Bridge sub 13.05 BR 3C Excavation for foundation by manual means in hard murum and BR.3 Page No. Cubic 177 172
structure boulders including shoring and strutting as necessary and 102 Meter
disposing off excavated stuff as directed etc. complete.
Bridge sub 13.06 BR 3C Excavation for foundation by mechanical means in hard murum BR.3 Page No. Cubic 132 81
structure and boulders including shoring and strutting as necessary and 102 Meter
disposing off excavated stuff as directed etc. complete.
Bridge sub 13.07 BR 3D Excavation for foundation by manual means in soft rock including BR.3 Page No. Cubic 324 291
structure shoring and strutting as necessary and disposing off excavated 102 Meter
stuff as directed etc. complete.
Bridge sub 13.08 BR 3D Excavation for foundation by mechanical means in soft rock BR.3 Page No. Cubic 274 100
Bridge sub 13.09 BR 3E Excavation for foundation in hard rock by blasting including BR.3 Page No. Cubic 525 403
structure shoring and strutting as necessary and disposing off excavated 102 Meter
stuff as directed etc. complete.
Bridge sub 13.1 BR 3E Excavation for foundation in hard rock by controlled blasting BR.3 Page No. Cubic 520 450
Bridge sub 13.11 BR 3F Excavation for foundation in hard rock by chiselling and wedging BR-3 Page No. Cubic 650 563
structure or line drilling including shoring and strutting as necessary and 102 Meter
disposing off excavated stuff as directed etc. complete. (excluding
dewatering)
Bridge sub 13.12 BR 3G Excavation for foundation in laterite rock including shoring and BR.3 Page No. Cubic 330 296
structure strutting as necessary and disposing off excavated stuff as 102 Meter
directed etc. complete.
Bridge sub 13.13 BR 3G Providing and fixing 25mm diameter steel anchor dowel in hard As directed by Number 88 50
structure rock including drilling hole of 32 mm diameter up to 0.75 mtrs Engineer in
depth, placing the dowel in position and effectively grouting the charge.
hole with CM 1:1 proportion etc. complete.
Bridge sub 13.14 BR 4 A Dewatering for abutments including diversion of stream, Br. 4 Page No. Cubic 78 60
structure providing cofferdams, bunds etc. as may be necessary for 103 Meter
foundation and other parts of the work including bailing and
pumping out water during and after excavation as may be
necessary etc. complete. (excavation, bedding, soling, PCC and
concreting in all sorts of soil after post monsoon flow)
Bridge sub 13.15 BR 4 A Dewatering for piers including diversion of stream, providing Br. 4 Page No. Cubic 110 78
structure cofferdams, bunds etc. as may be necessary for foundation and 103 Meter
other parts of the work including bailing and pumping out water
Bridge sub 13.16 BR 4 A Dewatering for returns including diversion of stream, providing Br. 4 Page No. Cubic 60 59
Bridge sub 13.17 BR 4 A Dewatering for rafts and cut off walls including diversion of Br. 4 Page No. Cubic 130 78
structure stream, providing cofferdams, bunds etc. as may be necessary for 103 Meter
concreting in all sorts of soil after post monsoon flow)
per unit)
Bridge sub 13.18 BR 4 A Dewatering for abutments including diversion of stream, Br. 4 Page No. Cubic 561 190
structure providing cofferdams, bunds etc. as may be necessary for 103 Meter
concreting in all sorts of soil in perinnial river)
Bridge sub 13.19 BR 4 A Dewatering for piers including diversion of stream, providing Br. 4 Page No. Cubic 855 697
in perinnial river)
Bridge sub 13.2 BR 4 A Dewatering for returns including diversion of stream, providing Br. 4 Page No. Cubic 110 78
in perinnial river)
Bridge sub 13.21 BR 4 A Dewatering for rafts and cut off walls including diversion of Br. 4 Page No. Cubic 690 330
structure stream, providing cofferdams, bunds etc. as may be necessary for 103 Meter
concreting in all sorts of soil in perinnial river)
Bridge sub 13.22 BR 4 B Dewatering on BHP basis by using water pump including diversion BR 4 Page No Hour 103 94
structure of stream, providing cofferdams, earthern bunds etc. as may be 104.105
required by using 3.0 BHP pump etc. complete. (prior approval of
required by using 5.0 to 9.0 BHP pump etc. complete. (prior
approval of Superintending Engineer will be necessary)
required by using 10.0 to 19.0 BHP pump etc. complete. (prior
approval of Superintending Engineer will be necessary)
Bridge sub 13.25 BR 5A Providing and laying in situ M10 cement concrete of trap/ BR.5 Page No. Cubic 2926 418
structure granite/ quartzite/ gneiss metal in foundation including necessary 105 and B.7, Meter
centering, formwork, bailing out water, compacting and curing Page No. 38
etc. complete. (with fully automatic micro processor based PLC
with SCADA enabled with reversible drum type mixer with natural
sand)
Bridge sub 13.26 BR 5A Providing and laying in situ M10 cement concrete of trap/ BR.5 Page No. Cubic 3502 1000
structure granite/ quartzite/ gneiss metal in foundation including necessary 105 & B 7 / Page Meter
centering, formwork, bailing out water, compacting and curing No. 38
with SCADA enabled with reversible drum type mixer with
crushed sand)
Bridge sub 13.27 BR 6 Providing uncoursed rubble stone masonry of trap/ granite/ BR.6 Page No. Cubic 1884 637
structure quartzite/ gneiss metal in CM 1:5 for foundation of piers, 105 Meter
abutments, wings etc. including bailing out of water, striking
joints, scaffolding and watering etc. complete.
Bridge sub 13.28 BR 8 Providing, fabricating, launching, floating and grounding in BR.8 Page No. Metric 60623 10000
structure position steel curbs for wells with necessary steel bracings and 108 Tonne
steel cutting edges as shown in the detailed drawings and
technical specifications etc. complete.
Bridge sub 13.29 BR 9A Providing and laying in situ CC M10 of trap/ granite/ quartzite/ BR.9 Page No. Cubic 3903 950
structure gneiss metal in the hollow of the steel curbs including compacting 109 and B.7, Meter
by vibrating and curing etc. complete. (with fully automatic micro Page No.38
processor based PLC with SCADA enabled with reversible drum
type mixer with natural sand)
Bridge sub 13.3 BR 9A Providing and laying in situ CC M10 of trap/ granite/ quartzite/ BR.9 Page No. Cubic 3603 950
structure gneiss metal in the hollow of the steel curbs including compacting 109 & B 7 / Page Meter
by vibrating and curing etc. complete. (with fully automatic micro No. 38
type mixer with crushed sand)
Bridge sub 13.31 BR 10 Providing, fabricating and setting out MS cutting edge for RCC BR.10 Page No. Metric 53424 5000
structure well curbs as per detailed drawings and technical specifications 110 Tonne
etc. complete.
per unit)
Bridge sub 13.32 BR 13A Providing and laying in situ M20 RCC work with trap/ granite/ BR.13 Page No. Cubic 4740 477
structure quartzite/ gneiss metal in well steining including shuttering, 112 and B. 7, Meter
compacting by vibrating, finishing and curing etc. complete. (fully Page No.38
reinforcement)
Bridge sub 13.33 BR 13A Providing and laying in situ M20 RCC work with trap/ granite/ BR - 13 Page No. Cubic 4591 780
structure quartzite/ gneiss metal in well steining including shuttering, 112 & B 7/ page Meter
compacting by vibrating, finishing and curing etc. complete. (fully no. 38
reinforcement)
Bridge sub 13.34 BR 13A Providing and laying in situ M25 RCC work with trap/ granite/ BR.13 Page No. Cubic 5160 780
reinforcement)
Bridge sub 13.35 BR 13A Providing and laying in situ M25 RCC work with trap/ granite/ BR - 13 Page No. Cubic 5108 780
structure quartzite/ gneiss metal in well steining including shuttering, 112 & B 7/ page Meter
compacting by vibrating, finishing and curing etc. complete. (fully no. 38
reinforcement)
Bridge sub 13.36 BR Providing and laying in situ M20 RCC work with trap/ granite/ BR.13 Page No. Cubic 5338 780
automatic micro processor based PLC with SCADA enabled
concrete batch mix plant / pan mixer with natural sand, excluding
reinforcement)
structure quartzite/ gneiss metal in well steining including shuttering, 105 Meter
concrete batch mix plant / pan mixer with crushed sand,
excluding reinforcement)
reinforcement)
structure quartzite/ gneiss metal in well steining including shuttering, 109 Meter
Bridge sub 13.4 BR 14 Sinking of wells upto 5.0 metres diameter for foundation through BR.14 Page No. Running 49665 29309
structure all strata (except rock) to be removed by grabbing and chiselling 113 Meter
soft disintegrated rock including blasting, large scale dewatering,
heavy chiselling, cutting by pneumatic tools, all materials
available to sink through such strata including removal of obstacle
and use of necessary plant and machinery, divers etc. and proper
seating of the wells etc. complete. (depth 0 to 5 metre)
Bridge sub 13.41 BR 14 Sinking of wells above 5.0 metres and upto 6.0 metres diameter BR.14 Page No. Running 71228 56610
structure for foundation through all strata (except rock) to be removed by 113 Meter
large scale dewatering, heavy chiselling, cutting by pneumatic
tools, all materials available to sink through such strata including
removal of obstacle and use of necessary plant and machinery,
divers etc. and proper seating of the wells etc. complete. (depth 0
to 5 metre)
per unit)
to 5 metre)
to 5 metre)
Bridge sub 13.44 BR 14 Sinking of wells above 8.0 metres and upto 9.0 metres diameter BR.14 Page No. Running NA NA
to 5 metre)
Bridge sub 13.45 BR 14 Sinking of wells above 9.0 metres and upto 10.0 metres diameter BR.14 Page No. Running NA NA
to 5 metre)
Bridge sub 13.46 BR 14 Extra charges for sinking of various diameter of well foundation in BR. 14A Page Cubic 1185 1290
structure hard rock encountered during sinking by chiselling in water etc. No. 113 Meter
complete.
Bridge sub 13.47 BR 16 Providing steel anchor dowel bars of 32 mm diameter and 4 m BR.16 Page No. Number 3809 915
structure length at the base of the well including drilling holes of 60 mm 120
diameter up to 2.5 m depth in rock, placing the dowels in position
and effectively grouting the holes with CM 1:1 etc. complete.
Bridge sub 13.48 BR 16A Providing steel anchor dowel bars of 32 mm diameter and 4 m BR. 16 Page No. Number 5450 882
structure length through steining of the wells including provision of 120
necessary ducts through staining, drilling holes of 60 mm
diameter up to 2.5 m depth in rock, placing the dowels in position
and effectively grouting the holes with CM 1:1 etc. complete.
Bridge sub 13.49 BR 17A Providing and laying in situ M15 CC of trap/ granite /quartzite BR.17 Page No. Cubic 4743 1091
structure /gneiss metal for the bottom plugs of wells in the dry condition 120 and B. 7, Meter
including compaction and curing wherever necessary etc. Page No.38
complete. (with fully automatic micro processor based PLC with
SCADA enabled with reversible drum type mixer with natural
sand)
per unit)
Bridge sub 13.5 BR 17A Providing and laying in situ M15 CC of trap/ granite /quartzite BR.17 Page No. Cubic 4403 1091
SCADA enabled with reversible drum type mixer with crushed
sand)
Bridge sub 13.51 BR 17B Providing and laying in situ M15 CC of trap/ granite /quartzite BR.17 Page No. Cubic 5009 1091
structure /gneiss metal for the bottom plugs of wells under water including 120 and B. 7, Meter
compaction and curing wherever necessary etc. complete. (with Page No.38
fully automatic micro processor based PLC with SCADA enabled
with reversible drum type mixer with natural sand)
Bridge sub 13.52 BR 17B Providing and laying in situ M15 CC of trap/ granite /quartzite BR.17 Page No. Cubic 4883 1091
structure /gneiss metal for the bottom plugs of wells under water including 120 and B. 7, Meter
compaction and curing wherever necessary etc. complete. (with Page No.38
with reversible drum type mixer with crushed sand)
Bridge sub 13.53 BR Providing and laying in situ M15 CC of trap/ granite /quartzite BR.17 Page No. Cubic 5258 1091
SCADA enabled concrete batch mix plant / drum mixer with
natural sand)
Bridge sub 13.54 BR Providing and laying in situ M15 CC of trap/ granite /quartzite BR.17 Page No. Cubic 5073 1091
SCADA enabled concrete batch mix plant / drum mixer with
crushed sand)
Bridge sub 13.55 BR 59 a Providing and laying in situ controlled grade of M15 of trap As directed by Cubic 4684 960
structure /granite /quartzite /gneiss metal for RCC works in cut off walls / Engineer in Meter
curtain walls including necessary scaffolding, centering, charge.
compacting by vibrator, finishing and curing etc. complete. (with
with reversible drum type mixer with natural sand, excluding
reinforcement)
with reversible drum type mixer with crushed sand, excluding
reinforcement)
reinforcement)
reinforcement)
reinforcement)
reinforcement)
Bridge sub 13.61 BR Providing and laying in situ controlled grade of M15 of trap As directed by Cubic 5173 910
reinforcement)
per unit)
reinforcement)
reinforcement)
Bridge sub 13.67 BR Providing islands of earth or approved material for laying steel BR.7. P.No. 107 Number 65041 6215
structure curb or cutting edge of well for two lane bridge, depth upto 3
metre in standing water and necessary caging for protection etc.
complete.
Bridge sub 13.68 BR Providing islands of earth or approved material for laying steel BR.7. P.No. 107 Number 100800 29836
structure curb or cutting edge of well for single lane bridge, depth upto 3
metre in standing water and necessary caging for protection etc.
complete.
Report Name: e DSR
unit)
Bridge 14.01 BR 34A Providing and fixing neoprene bearing as per detailed As directed by Cubic 1.73 0.25
Bearings drawings etc. complete. Engineer in charge. Centimeter
Bridge 14.02 BR Providing tar paper bearing including laying in proper As directed by Square Meter 18 3
Bearings position etc. complete. Engineer in charge
Bridge 14.03 BR 62 Providing and laying 0.90 meter thick metal mat As directed by Square Meter 785 31
Bearings consisting of rubble, oversize metal and normal size Engineer in charge
metal in specified thickness as per detailed drawing
Report Name: e DSR
unit)
Bridge Super 15.01 BR 35A Providing, cutting, bending, hooking, tying and laying in position BR.35 Page No. Metric 470000 7000
Structure TMT FE 500 steel bars for reinforcement for all RCC works as per 134 Tonne
detailed drawings etc. complete.
Bridge Super 15.02 BR 35B a Providing and joining 25 mm diameter MS / TMT FE 500 steel As directed by Number 605 482
Structure reinforcement bars by bottle nuts including supplying and fitting Engineer in
them in position etc. complete. charge
Bridge Super 15.03 BR 35B b Providing and joining 32 mm diameter MS /TMT FE 500 steel As directed by Number 795 460
Structure reinforcement bars by bottle nuts including supplying and fitting Engineer in
them in position etc. complete. charge.
Bridge Super 15.04 BR 36A Providing welded joints for 25 mm and below diameter bars for BR.36 Page No. Number 160 35
Structure steel reinforcement etc. complete. 134
Bridge Super 15.05 BR 36B Providing welded joints for 32 mm and below diameter bars for BR.36 Page No. Number 175 35
Structure steel reinforcement etc. complete. 134
Bridge Super 15.06 BR Providing and fixing in position to the exact profile and As directed by Metric 177072 6250
Structure prestressing the high tensile strands to specified ultimate Engineer in Tonne
strength, standard end anchorages, cable ducts, grouting ducts charge.
after prestressing and bearing plates with wedges as per detailed
drawings including necessary plant and machinery for
prestressing etc. complete.
Bridge Super 15.07 BR 38A Providing and laying in situ M20 controlled cement concrete of BR.38(a) Page Cubic 5718 1885
Structure trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck No. 135 and B. Meter
slab etc. including ramming, vibrating, curing, formwork, 7, Page No.38
centering and finishing in cement plaster excluding reinforcement
etc. complete. (height up to 4 meter with fully automatic micro
processor based PLC with SCADA enabled reversible drum type
mixer and natural sand)
Bridge Super 15.09 BR 38A Providing and laying in situ M25 controlled cement concrete of BR.38(b & c) Cubic 6185 1962
Structure trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck Page No. 135 Meter
slab etc. including ramming, vibrating, curing, formwork, and B. 7, Page
centering and finishing in cement plaster excluding reinforcement No.38
mixer and natural sand)
Bridge Super 15.13 BR Providing and laying in situ M20 controlled cement concrete of BR.38(a) Page Cubic 5862 1962
processor based PLC with SCADA enabled concrete batch mix
plant / pan mixer with crushed sand)
unit)
plant i pan mixer and crushed sand)
Bridge Super 15.15 BR Providing and laying in situ M25 controlled cement concrete of BR.38(b & c) Cubic 6368 1962
plant / pan mixer with natural sand)
with SCADA enabled concrete batch mix plant / pan mixer and
natural sand) i) height up to
3 m, normal rate. ii) Depth 5 to 10 m, add 30 percent extra.
iii) Depth 10 to 15 m, add 40 percent extra. iv) Depth 15 to 20 m,
add 60 percent extra. v) Depth 20 m and above, add 100 percent
extra.
with SCADA enabled concrete batch mix plant / pan mixer with
crushed sand)
i) height up to 3 m, normal rate. ii) Depth 5 to 10 m, add 30
percent extra.
add 60 percent extra.
Bridge Super 15.19 BR 38A v) Depth 20
Providing m and
and above,
laying addM20
in situ 100 controlled
percent extra.
cement concrete of BR.38(b & c) Cubic 6381 1885
Structure trap/ granite/ quartzite/ gneiss metal for RCC work in main/ cross Page No. 135 Meter
girders, diaphrams etc. including ramming, vibrating, curing, and B. 7, Page
formwork, centering and finishing in cement plaster excluding No.38
reinforcement etc. complete. (height up to 6 meter with fully
reversible drum type mixer and natural sand)
reversible drum type mixer and crushed sand)
unit)
reversible drum type mixer and natural sand)
concrete batch mix plant / pan mixer with natural sand)
concrete batch mix plant / pan mixer with crushed sand)
concrete batch mix plant / pan mixer with natural sand)
concrete batch mix plant / pan mixer with crushed sand)
reinforcement etc. complete. (with fully automatic micro
plant / pan mixer with natural sand)
i) height up to 5 m, normal rate. ii) Depth 5 to 10 m, add 30
percent extra.
add 60 percent extra. v) Depth 20 m and above, add 100 percent
extra.
reinforcement etc. complete. (with fully automatic micro
i) height up to 5 m, normal rate.
ii) Depth 5 to 10 m, add 30 percent extra. iii)
Depth 10 to 15 m, add 40 percent extra. iv) Depth
15 to 20 m, add 60 percent extra. v) Depth 20 m
and above, add 100 percent extra.
unit)
Bridge Super 15.31 MORTH C1- Providing and laying buried type expansion joint (expansion gap BR.43 Page No. Cubic 684 135
Structure 2604 being 20mm) covered with 12mm thick 200 mm wide galvinised 138 Meter
weldable structural steel plate as per IS 2062 placed symmetrically
to the centre line of the joint, resting freely over the top surface of
the deck concrete, welding of 8mm diameter 100mm long
galvanised nails spaced 300mm intervals along the centre line of
the plate, all as specified in MoRTH clause 2604 etc. complete.
Bridge Super 15.32 BR 43A Providing copper plate expansion joints as per detailed drawing BR.43 Page No. Running 3291 135
Structure No. 4/D-1 of 1972 D type etc. complete. 138 Meter
Bridge Super 15.33 BR 43B Providing expansion joints with 25mm thick bituminous pad as per BR.43 Page No. Square 800 750
Structure detailed drawings etc. complete. 138 Meter
Bridge Super 15.34 BR 45 Providing and laying in situ 1:4:8 cement concrete of trap /granite B R.45 Page No. Cubic 3190 675
Structure /quartzite /gneiss metal for haunch filling including compacting, 139 Meter
curing, mixing etc. complete. (with fully automatic micro
type mixer with natural sand)
Bridge Super 15.35 BR 45 Providing and laying in situ 1:4:8 cement concrete of trap /granite B R.45 Page No. Cubic 3090 675
Structure /quartzite /gneiss metal for haunch filling including compacting, 139 Meter
curing, mixing etc. complete. (with fully automatic micro
type mixer with crushed sand)
Bridge Super 15.36 BR 46 Providing trap/ granite/ quartzite/ gneiss rubble filling over BR.46 Page No. Cubic 460 130
Structure haunches and arches including hand packing etc. complete. 140 Meter
Bridge Super 15.37 BR 47 Providing and laying in situ M20 CC of trap/ granite/ quartzite/ BR.47(a) Page Cubic 940 410
Structure gneiss metal for wearing course of 8cm thick including No. 140 and B. Meter
compacting, finishing, curing and filling in joints with bitumen etc. 7, Page No.38
SCADA enabled with reversible drum type mixer with natural
sand)
Bridge Super 15.38 BR 47 Providing and laying in situ M20 CC of trap/ granite/ quartzite/ BR.47(a) Page Cubic 4815 940
Structure gneiss metal for wearing course of 8cm thick including No. 140 and B. Meter
compacting, finishing, curing and filling in joints with bitumen etc. 7, Page No.38
SCADA enabled with reversible drum type mixer with crushed
sand)
Bridge Super 15.39 BR Providing and laying in situ M20 CC of trap/ granite/ quartzite/ BR.47(a) Page Cubic 5450 960
Structure gneiss metal for wearing course 8cm thick including compacting, No. 140 and B. Meter
finishing, curing and filling in joints with bitumen etc. complete. 7, Page No.38
(with fully automatic micro processor based PLC with SCADA
enabled concrete batch mix plant / pan mixer with natural sand)
Bridge Super 15.4 BR Providing and laying in situ M20 CC of trap/ granite/ quartzite/ BR.47(a) Page Cubic 960 383
Structure gneiss metal for wearing course 8cm thick including compacting, No. 140 and B. Meter
finishing, curing and filling in joints with bitumen etc. complete. 7, Page No.38
(with fully automatic micro processor based PLC with SCADA
enabled concrete batch mix plant / pan mixer with crushed sand)
Bridge Super 15.41 BR 48 Providing vent holes 100mm diameter GI pipe in the slab and BR.48 Page No. Number 380 40
Structure wearing course with iron grill at the top and GI pipe at bottom as 142
per drawing etc. complete.
Bridge Super 15.42 BR 50 Providing and laying in situ M20 RCC of trap/ granite/ quartzite/ BR.50 Page No. Cubic 5760 1980
Structure gneiss metal for RCC work of ballast walls, kerbs and box returns 143 and B. 7, Meter
including scaffolding, compaction, formwork finishing and curing Page No.38
etc. complete. (excluding reinforcement, with fully automatic
micro processor based PLC with SCADA enabled with reversible
drum type mixer with natural sand)
Bridge Super 15.43 BR 50 Providing and laying in situ M20 RCC of trap/ granite/ quartzite/ BR.50 Page No. Cubic 5670 1980
drum type mixer with crushed sand)
Bridge Super 15.44 BR Providing and laying in situ M20 RCC of trap/ granite/ quartzite/ BR.50 Page No. Cubic 6150 1980
micro processor based PLC with SCADA enabled concrete batch
mix plant / pan mixer with natural sand)
unit)
Bridge Super 15.45 BR Providing and laying in situ M20 RCC of trap/ granite/ quartzite/ BR.50 Page No. Cubic 5584 1980
micro processor based PLC with SCADA enabled concrete batch
mix plant / pan mixer with crushed sand)
Bridge Super 15.46 BR 51 Providing RCC parapet with CC M20 of trap/ granite/ quartzite/ BR.51 (a) Page Running 1243 551
Structure gneiss metal with cast in situ/precast panels as per the detailed No. 144 and B. Meter
drawing including reinforcement, scaffolding, centering, 7, Page No.38
formwork, compacting, finishing and curing etc. complete. (with
with reversible drum type mixer)
Bridge Super 15.47 BR Providing RCC parapet with CC M20 of trap/ granite/ quartzite/ BR.51 (a) Page Cubic 1294 557
Structure gneiss metal with cast in situ/precast panels as per the detailed No. 144 and B. Meter
drawing including reinforcement, scaffolding, centering, 7, Page No.38
formwork, compacting, finishing and curing etc. complete. (with
concrete batch mix plant / pan mixer)
Bridge Super 15.48 BR 51B Providing railing of mild steel angle post 2.0m center to center of B.R.51(b) Page Running 2000 300
Structure section 75mm x 75mm x 10mm or equivalent I/C section of height No. 145 Meter
1.05 above bridge surface with minimum anchor length of 30cm
including hold fast of 25mm diameter MS bar welded at the
bottom and concreting of 1:3:6 of size 30cm x 30cm x 30cm with
three rows of 40mm B class GI pipe provided at 30cm on center to
center including scaffolding and one coat of anticorrosive paint
with two coats of oil painting, curing of concrete etc. complete.
Bridge Super 15.49 BR 51C Providing RCC railing of cast in situ RCC posts with M20 CC of BR.51(c) Page Running 1966 180
Structure trap/ granite/ quartzite/ gneiss metal for horizontal and vertical No. 145 and B. Meter
members as per detailed drawings including reinforcement, 7, Page No.38
scaffolding, centering, formwork, compaction, finishing and curing
with watering chemical compound etc. complete. (fully automatic
drum type mixer)
Bridge Super 15.5 BR 55 Providing 100mm diameter GI water spouts as per detailed BR.55 Page No. Number 550 150
Structure drawings in RCC slab and wearing surface / kerb etc. complete. 150
Bridge Super 15.51 BR 59 a Providing and casting special grade in M35 controlled cement BR-38 Page Cubic 7382 1392
Structure concrete for prestressed concrete work for main girder including No.135 and B. Meter
slab, cross girder etc. including centering and scaffolding or 7, Page No.38
launching including necessary plant and machinery for the job
shuttering, vibrating, curing, finishing etc. complete. (fully
Bridge Super 15.52 BR 59 a Providing and casting special grade in M35 controlled cement BR-38 Page Cubic 7160 1392
Bridge Super 15.53 BR Providing and casting special grade in M35 controlled cement BR-38 Page Cubic 8160 815
concrete batch mix plant or pan mixer with natural sand)
Bridge Super 15.54 BR Providing and casting special grade in M35 controlled cement BR-38 Page Cubic 7692 815
concrete batch mix plant or pan mixer with crushed sand)
Report Name: e DSR
unit) unit)
Bridge : 16.01 MORTH Excavation for foundation of structure as per drawing and technical M.O.R.T & H - Cubic 538 510
Bored Pile specifications including setting out, construction of shoring , brushing, 304 Meter
removal of stumps and other deleterious matter, dressing of side and
bottom and back filling with approved material etc. complete. (in
marshy soil up to 3.00 meter depth by manual means)
Bridge : 16.02 BR Providing M30 RCC cast in situ 450mm diameter bored piles each of BR-21 Page 124, Running 2133 588
Bored Pile load capacity as per design and of specified diameter of as directed, MORTH - 1100 Meter
placed through steel shell sunk to the required depth through all and 1700
strata except rock, excluding provision of reinforcement including
placing concrete by tremie arrangement, compaction of concrete and
withdrawal of steel shell with fully automatic micro processor based
PLC with SCADA enabled with reversible drum type mixer etc.
complete.
Bridge : 16.03 MORTH Excavation for foundation of structure as per drawing and technical M.O.R.T & H - Cubic 149 42
Bored Pile specifications including setting out, construction of shoring , brushing, 304 Meter
bottom and back filling with approved material etc. complete. (in
marshy soil up to 3.00 meter depth by mechanical means)
complete.
Bridge : 16.05 MORTH Providing and filling annular space around footing in rock by using M.O.R.T & H - Cubic 3818 505
Bored Pile concrete of M15 grade etc. complete. 2100 Meter
complete.
Bridge : 16.07 MORTH Providing and filling sand in foundation trenches as per drawing and M.O.R.T & H - Cubic 1274 120
Bored Pile technical specifications etc. complete. 300,2100 Meter
complete.
Bridge : 16.09 MORTH Providing stone masonry work in cement mortar 1:3 in foundation M.O.R.T & H - Cubic 3570 1300
Bored Pile with watering complete as per drawings and technical specifications 1400 Meter
etc. complete. (coursed rubble masonry, first sort)
complete.
Bridge : 16.11 MORTH Providing stone masonry work in cement mortar 1:3 in foundation M.O.R.T & H - Cubic 3500 1310
Bored Pile with watering complete as per drawings and technical specifications 1400 Meter
etc. complete. (random rubble masonry)
complete.
Bridge : 16.13 MORTH Providing and laying PCC in M15 grade levelling course of 100 mm M.O.R.T & H - Cubic 3997 525
Bored Pile thick below pile cap with fully automatic micro processor PLC with 1100, 1700 Meter
SCADA enabled reversible drum type mixer etc. complete.
unit) unit)
complete.
Bridge : 16.15 MORTH Providing Ist class brick masonry work in 1:3 in sub structure MORT & H ? Cubic 5599 1350
Bored Pile complete with watering as per drawings and technical specifications 1300, 2200 Meter
etc. complete. (excluding pointing and plastering)
complete.
Bridge : 16.17 MORTH Providing stone masonry work in cement mortar 1:3 with watering for MORT & H ? Cubic 3510 1280
Bored Pile substructure complete as per drawings and technical specifications 1400, 2200 Meter
etc. complete. (random rubble masonry)
complete.
etc. complete. (course rubble masonry, first sort)
complete.
etc. complete. (ashler masonry, first sort)
complete.
Bridge : 16.23 MORTH Providing weep holes in brick masonry /plain /reinforced concrete MORT & H -2700 Running 129 13
Bored Pile abutment, wing wall / return wall with 100mm diameter AC pipe & 2200 Meter
extending through the full width of the structure with slope of 1V:
20H towards drawing face as per drawings and technical
specifications etc. complete.
complete.
Bridge : 16.25 MORTH Back filling behind abutment, wing wall and return wall as per MORT & H 2200 Cubic 502 315
Bored Pile drawings and technical specifications etc. complete. (by granular &-710.1.4 of iRC Meter
material) 78
complete.
unit) unit)
Bridge : 16.27 MORTH Back filling behind abutment, wing wall and return wall as per MORT & H 2200 Cubic 857 315
Bored Pile drawings and technical specifications etc. complete. (by sandy &-710.1.4 of iRC Meter
material) 78
complete.
Bridge : 16.29 MORTH Providing and laying of filter media with granular materials/ stone MORT & H 2200 Cubic 778 270
Bored Pile crushed aggregates satisfying the requirements laid down in clause &-710.1.4 of iRC Meter
2504.2.2 of MoRTH specifications to a thickness of not less than 600 78
mm with smaller size towards the soil and bigger size towards the
wall and provided over the entire surface behind abutment, wing wall
and return wall to the full height compacted to a firm condition as per
drawing and technical specifications etc. complete.
complete.
Bridge : 16.31 MORTH Supplying, fitting and fixing in position true to line and level cast steel MORT & H - Metric 291 68
Bored Pile rocker bearing conforming to IRC:83 (Pt-1) section IX and clause 2003 2000,1000,2200 Tonne
of MoRTH specifications including all accessories as per drawings and &f IRC 83-1982
complete.
Bridge : 16.33 MORTH Supplying, fitting and fixing in position true to line and level forged MORT & H ? Metric 583 68
Bored Pile steel rocker bearing including all accessories as per drawings and 2000 & 2200 Tonne
technical specifications conforming to IRC:83 (Pt-1) section IX and
clause 2003 of MoRTH specifications etc. complete.
complete.
Bridge : 16.35 MORTH Supplying, fitting and fixing in position true to line and level sliding MORT & H ? Metric 234 33
Bored Pile plate bearing with PTFE surface sliding on stainless steel including all 2000 & 2200 Tonne
accessories as per drawings and technical specifications and BS:5400,
section 9.1 and 9.2 and clause 2004 of MoRTH specifications etc.
complete.
complete.
Bridge : 16.37 MORTH Supplying, fitting and fixing in position true to line and level MORT & H ? Cubic 1.4 0.1
Bored Pile elastomeric bearing including all accessories as per drawing and 2000 & 2200 Centimeter
technical specifications and IRC:83 (Pt-II) section IX and clause 2005 of
MoRTH specifications etc. complete.
placing concrete by tremie arrangement compaction of concrete and
PLC with SCADA enabled concrete batch mix plant / pan mixer etc.
complete.
unit) unit)
Bridge : 16.39 MORTH Supplying, fitting and fixing in position true to line and level sliding MORT & H ? Metric 228 13
Bored Pile plate bearing with stainless steel plate sliding on stainless steel plate 2000 & 2200 Tonne
with mild steel matrix including all accessories as per drawings and
complete.
Bridge : 16.41 MORTH Supplying, fitting and fixing in position true to line and level POT- PTFE MORT & H ? Metric 218 13
Bored Pile bearing consisting of a metal piston supported by a disc or 2000 & 2200 Tonne
unreinforced elastomer confined within a metal cylinder, sealing
rings, dust seals, PTFE surface sliding against stainless steel mating
surface, complete assembly to be of cast steel / fabricated structural
steel, metal and elastomer elements to be as per IRC: 83 part I and II
respectively and other parts conforming to BS:5400, section 9.1 and
9.2 and clause 2006 of MoRTH specifications as per drawing and
approved technical specifications etc. complete.
complete.
Bridge : 16.43 MORTH Providing and laying cement concrete wearing coat M30 grade MORT & H ? Cubic 8800 1100
Bored Pile including reinforcement as per drawings and technical specifications 2700 Meter
etc. complete.
complete.
Bridge : 16.45 MORTH Providing and laying 12mm thick mastic asphalt wearing course on MORT & H ? 500, Square 350 70
Bored Pile top of deck slab excluding prime coat with paving grade bitumen 2700 Meter
meeting the requirements given in table 500-29, prepared by using
mastic cooker and laid to required level and slope after cleaning the
surface including providing antiskid surface with bitumen precoated
fine grained hard stone chipping of 9.5 mm nominal size at the rate of
0.005 cum per 10 Sqm and at an approximate spacing of 10 cm center
to center in both directions, pressed into surface when the
temperature of surfaces not less than 100 deg C, protruding 1 mm to
4mm over mastic surface as per clause 515 etc. complete.
complete.
Bridge : 16.47 MORTH Construction of precast RCC railing of M30 Grade, aggregate size not MORT & H ? Running 1430 150
Bored Pile exceeding 12 mm, true to line and grade, tolerance of vertical RCC 2700, 1500, 1600 Meter
post not to exceed 1 in 500, centre to centre spacing between vertical & 1700
post not to exceed 2000 mm, leaving adequate space between
vertical post for expansion as per approved drawings and technical
complete.
unit) unit)
Bridge : 16.49 MORTH Construction of RCC railing of M30 Grade in situ with 20 mm nominal MORT & H ? Running 1435 150
Bored Pile size aggregate true to line and grade, tolerance of vertical RCC post 2700, 1500, 1600 Meter
not to exceed 1 in 500, center to center spacing between vertical post & 1700
not to exceed 2000 mm, leaving adequate space between vertical
post for expansion, complete with fully automatic micro processor
PLC with SCADA enabled reversible drum type mixer as per approved
drawings and technical specifications etc. complete.
complete.
Bridge : 16.51 MORTH Providing and laying in PCC M15 grade leveling course below MORT & H ? Cubic 4300 600
Bored Pile approach slab complete with fully automatic micro processor PLC 1700 & 2700 Meter
with SCADA enabled reversible drum type mixer as per drawings and
Technical specifications etc. complete.
complete.
Bridge : 16.53 MORTH Providing and laying of RCC in M30 grade approach slab including MORT & H ? Cubic 7850 600
Bored Pile reinforcement and formwork complete with fully automatic micro 1500, 1600, 1700 Meter
processor PLC with SCADA enabled reversible drum type mixer as per & 2700
drawings and technical specifications etc. complete.
complete.
Bridge : 16.55 MORTH Providing, transporting and placing in position precast pretensioned MORT & H 1800, Cubic 20500 3200
Bored Pile concrete girders as per drawings and technical specifications etc. 2300 Meter
complete.
complete.
Bridge : 16.57 MORTH Providing and applying two coat of water based cement paint to un MORT & H 2800, Square 124 20
Bored Pile plastered concrete surface after cleaning the surface of dirt, dust, oil, Meter
grease, efflorescence etc. complete. (applying 1 litre paint on 2 sqmt)
complete.
Bridge : 16.59 MORTH Providing and laying a burried expansion joint, expansion gap being MORT & H 2600 Running 1200 7
Bored Pile 20 mm, covered with 12 mm thick, 200 mm wide galvanized weldable Meter
structural steel plate as per IS: 2062, placed symmetrical to center
line of the joint, resting freely over the top surface of the deck
concrete, welding of 8 mm diameter 100 mm long galvanised nails
spaced 300 mm c/c along the center line of the plate, all as specified
in clause 2604 etc. complete.
unit) unit)
complete.
Bridge : 16.61 MORTH Providing and filling 20 mm thick compressible fibre board in MORT & H ? Running 440 7
Bored Pile expansion joint complete as per drawings and technical specifications 2600 Meter
etc. complete.
complete.
Bridge : 16.63 MORTH Providing and filling joint sealing compound with coarse sand and 6% MORT & H ? Running 24 7
Bored Pile bitumen by weight as per drawings and technical specifications etc. 2600 Meter
complete.
complete.
Bridge : 16.65 MORTH Providing and laying of asphaltic plug joint to provide for horizontal MORT & H ? Running 1045 47
Bored Pile movement of 25 mm and vertical movement of 2 mm, depth of joint 2600 Meter
varying from 75 mm to 100 mm, width varying from 500 mm to 750
mm in traffic direction covered with a closure plate of 200 mm X 6
mm of weldable structural steel conforming to IS:2062, asphaltic plug
to consist of polymer modified bitumen binder, carefully selected
single size aggregate to 12.5mm nominal size and a heat resistant
foam caulking /backer rod all as per approved drawings and
complete.
Bridge : 16.67 MORTH Providing and laying of an elastomeric slab steel expansion joint, MORT & H ? Running 23816 55
Bored Pile catering to right or skew in less than 20 degree, moderately curved 2600 Meter
with maximum horizontal movement upto 50 mm to be installed by
the manufacture / supplier or their authorized representative
ensuring compliance to the manufactures instructions for installation
for road and bridge works as per approved drawings and standard
complete.
Bridge : 16.69 MORTH Providing and laying of compression seal joint consisting of steel MORT & H ? Running 3241 32
Bored Pile armoured nosing at two edges of the joint gap suitably anchored to 2600 Meter
the deck concrete and a preformed chloroprene elastomer or closed
cell foam joint sealer compressed and fixed into the joint gap with
special adhesive binder to cater for a horizontal movement upto 40
mm and vertical movement of 3 mm etc. complete.
unit) unit)
complete.
Bridge : 16.71 MORTH Providing and laying of a strip seal expansion joint catering to MORT & H ? Running 10503 34
Bored Pile maximum horizontal movement upto 70 mm to be installed by the 2600 Meter
manufacturer / supplier to their authorized representative ensuring
compliance to the manufacturers instruction for installation as per
approved drawings and standard specifications etc. complete.
complete.
Bridge : 16.73 MORTH Providing and laying boulders apron on river bed for protection MORT & H-2500 Cubic 847 260
Bored Pile against scour with stone boulders weighing not less than 40 kg each Meter
complete as per drawings and Technical specifications etc. complete.
(boulder laid without wire crates)
Bored Pile load capacity as per design and of specified diameter of as directed, MORTH - 1100, Meter
placed through steel shell sunk to the required depth through all 1600 and 1700
complete.
Bridge : 16.75 MORTH Providing and laying of boulder apron laid in wire crates made with 4 MORT & H-2500 Cubic 1579 330
Bored Pile mm dia GI wire conforming to IS:2801 and IS:4828 in 100 mm X 100 Meter
mm mesh weaved diagonally including 10% extra for laps and joints
laid with stone boulder weighing not less than 40 kg each etc.
complete.
complete.
Bridge : 16.77 MORTH Providing and laying of apron with cement concrete blocks of size MORT & H-2500 Cubic 4300 730
Bored Pile 0.50X0.50X0.50m cast in situ and made with nominal mix of M15 Meter
grade cement concrete with a minimum cement content of
250kg/cum with fully automatic micro processor PLC with SCADA
enabled reversible drum type mixer as per IRC:21-2000 etc. complete.
complete.
Bridge : 16.79 MORTH Providing and laying pitching on slopes laid over prepared filter media MORT & H-2500 Cubic 743 335
Bored Pile including boulder apron laid dry in front of toe of embankment Meter
complete as per drawing and technical specifications etc. complete.
(by stone/boulder)
complete.
Bridge : 16.81 MORTH Providing and laying pitching on slopes laid over prepared filter media MORT & H-2500 Cubic 4208 650
Bored Pile including boulder apron laid dry in front of toe of embankment Meter
complete with fully automatic micro processor PLC with SCADA
enabled reversible drum type mixer as per drawings and technical
specifications etc. complete. (concrete blocks of size 0.30x
0.30x0.30m in CC M15 grade)
unit) unit)
complete.
Bridge : 16.83 MORTH Providing and laying filter material underneath pitching in slopes as MORT & H-2500 Cubic 1030 NA
Bored Pile per drawings and technical specifications etc. complete. Meter
complete.
Bridge : 16.85 MORTH Laying of a geotextile filter between pitching and embankment slopes MORT & H ? 700 Square 840 135
Bored Pile on which pitching is laid to prevent escape of the embankment & 1500 Meter
material through the voids of the stone pitching / cement concrete
blocks as well as to allow free movement of water without creating
any uplift head on the pitching etc. complete.
complete.
Bridge : 16.87 MORTH Providing and laying rubble stone flooring laid in cement mortar 1:3 MORT & H ?2500 Cubic 4045 1250
Bored Pile as per drawings and technical specifications etc. complete. Meter
complete.
Bridge : 16.89 MORTH Providing and laying cement concrete blocks of M15 grade flooring MORT & H ?2500 Cubic 5637 935
Bored Pile laid in cement mortar 1:3 as per drawings and technical specifications Meter
etc. complete.
complete.
Bridge : 16.91 MORTH Construction of dry rubble flooring at cross drainage works etc. MORT & H ? Cubic 1558 1052
Bored Pile complete. 2500 Meter
complete.
Bridge : 16.93 MORTH Construction of stone masonry curtain wall in cement mortar 1:3 as MORT & H ? Cubic 3400 1035
Bored Pile per drawings and technical specifications etc. complete. 2500 Meter
complete.
Bridge : 16.95 MORTH Providing M15 CC work for cast in situ curtain wall as per drawing and MORT & H ? Cubic 4200 660
Bored Pile technical specifications etc. complete. 2500 Meter
unit) unit)
Bridge : 16.96 BR Providing M35 RCC cast in situ 900mm diameter bored piles each of BR-21 Page 124, Running 6077 NA
complete.
Bridge : 16.97 MORTH Providing flexible apron of 100 cm thick comprising of loose stone MORT & H ? Cubic 950 525
Bored Pile boulders weighing not less than 40 kg beyond curtain wall etc. 2500 Meter
complete.
complete.
Bridge : 16.99 MORTH Providing and construction of a gabian structure for retaining earth MORT & H-2500 Cubic 1582 112
Bored Pile with segments of wire crates of size 7.0 x 3.0 x 0.6m each divided into Meter
1.5 m compartments by cross netting, made form 4 mm galvansed
steel wire @ 32kg per 10 sqm having minimum tensile strength of
300Mpa conforming to IS:280 and galvanizing coating conforming to
IS:4826 woven into mesh with double twist, mesh size not exceeding
100x100mm, filled with boulders with least dimension of 200mm, all
loose ends to be tied with 4mm galvanized steel wire etc. complete.
complete.
Bridge : 16.101 MORTH Providing and constructing gabain structures for erosion control, river MORT & H-2500 Cubic 3100 410
Bored Pile training works and protection works with wire crates of size 2.0m x Meter
1.0m x 0.30m each divided into 1 m compartments by-cross netting,
made from 4 mm galvanized steel wire @ 32 kg per 10sqm having
minimum tensile strength of 300Mpa conforming to IS:280 and
galvanizing coating conforming to IS 4826, wovan into mesh with
double twist, mesh size not exceeding 100 x 100mm, filled with
boulders with least dimension of 200mm, all loose ends to be securely
tied with 4mm galvanized steel wire etc. complete.
complete.
Bridge : 16.103 MORTH Removal of existing 75mm thick cement concrete wearing coat MORT & H-2800 Square 150 48
Bored Pile including its disposal complete as per technical specification without Meter
causing any detrimental effect to any part of the bridge structure and
removal of dismantled material with all lifts and lead up to 1000m etc.
complete.
complete.
Bridge : 16.105 MORTH Removal of existing asphaltic wearing coat comprising of 50mm thick MORT & H-2800 Square 112 35
Bored Pile asphaltic concrete laid over 12 mm thick mastic asphalt including Meter
disposal with all lift and lead upto 100m etc. complete.
complete.
unit) unit)
Bridge : 16.107 MORTH Providing and laying cement concrete wearing coat M30 grade with MORT & H ? Cubic 10590 1245
Bored Pile batch mix type concrete mixer with SCADA including reinforcement as 2700 Meter
per drawings and technical specifications etc. complete.
complete.
Bridge : 16.109 MORTH Providing and laying of reinforced cement concrete in M30 grade MORT & H ? Cubic 9805 1015
Bored Pile approach slab including reinforcement and formwork complete with 1500, 1600, 1700 Meter
batch mix type concrete mixer with SCADA as per drawings and & 2700
complete.
complete.
complete.
complete.
complete.
complete.
complete.
unit) unit)
complete.
complete.
complete.
complete.
complete.
complete.
complete.
complete.
complete.
unit) unit)
complete.
complete.
Bridge : 16.128 BR Providing, placing and driving in position 6mm thick permanent MS MORTH 4th Metric 61015 10180
Bored Pile liner up to required depth with 12 mm thick MS cutting edge of 0.50 Revision No.1204 Tonne
meter length of bottom including fabricating, cutting the MS sheet to and 1904
required diameter and shape, welding the joints and driving with the
help of required machineries, all materials, labour and lift etc.
complete.
Report Name: e DSR
unit)
Bridge 17.01 BR Providing and injecting epoxy grout including structuring of crack in As directed by Kilogram 780 115
maintenance the body of slab girder by sand blasting, fixing inlet tube Engineer in
arrangement including cost of materials, machinery required for charge.
the work and labour charges etc. complete.
Bridge 17.02 BR Repairing of honey combed or spilling area by chipping out the As directed by Square 395 40
maintenance damaged spalled or honey combed portion of concrete up to Engineer in Meter
rusted rebars, cleaning of all rust, scale and loose materials, charge.
scaffolding, compressed air machinery etc. complete. (item
includes use of air compressor, chipping machine and scaffolding
for height 8 to 10 meter)
Bridge 17.03 BR Providing and applying well mixed polymer cement slurry in ratio As directed by Square 493 40
maintenance 1:2 over well soaked but surface dry concrete and steel rebar for Engineer in Meter
adhesion of fresh cement and sand mortar as per specification as charge.
directed etc. complete. (item includes use of polymers like sikalatex
or similar materials of relevant specification and scaffolding for
height 8 to 10 meter)
Bridge 17.04 BR Repairs of expansion joints by removing rich mix cement concrete As directed by Square 2196 215
maintenance including stacking the spoil as directed with all leads, lifts etc. Engineer in Meter
complete. (use of equipments like air compressor is considered in charge.
the item)
Bridge 17.05 BR Providing and laying M35 grade RCC jacketing work around the As directed by Cubic 5449 1710
maintenance existing piers of bridges etc. complete. (with fully automatic micro Engineer in Meter
processor based PLC with SCADA enabled with reversible drum charge.
type mixer with natural sand, height of 8 to 10 meter)
processor based PLC with SCADA enabled with reversible drum charge.
type mixer with crushed sand, height of 8 to 10 meter)
processor based PLC with SCADA enabled concrete batch mix plant charge.
/ pan mixer with natural sand, height of 8 to 10 meter)
processor based PLC with SCADA enabled concrete batch mix plant charge.
/ pan mixer with crushed sand, height of 8 to 10 meter)
Bridge 17.09 BR Providing and injecting epoxy grout including structuring of cracks As directed by Number 1288 167
maintenance in the body of slab girder, fixing inlet tube arrangement including Engineer in
cost of materials, machinery required for the work labour charges charge.
etc. (2kg of grout is considered per hole)
Bridge 17.1 Road Main. Maintenance of bridge/slab type culverts by way of clearing, As directed by Number 286 115
maintenance cleaning, erosion repair, repairs to cracks, parapet walls and Engineer in
protection works including painting of parapets / kerbs as per charge.
drawing etc. complete.
Bridge 17.11 Road Main. Maintenance of causeway by way of minor surface repairs, As directed by Running 121 71
maintenance replacing guide posts, repair of flood gauges, removal of debris, Engineer in Meter
providing boulders and protection work and painting etc. complete. charge.
Report Name: e DSR
No. Specification (Completed (Labour
Rate In Rs. Rate In Rs.
per unit) per unit)
Excavation 31.010 BDA 1 Excavation for foundation in earth, soil of all types, sand, gravel and Bd.A.1 Page Cubic Meter 139.00 125.00
soft murum, including removing the excavated material up to a distance No. 259
of 50 m. beyond the building area & stacking and spreading as directed,
dewatering, preparing the bed for the foundation and necessary back
filling, ramming, watering including shoring and strutting etc.
complete. (Lift upto 1.5 m.)
By Manual Means
Excavation 31.020 BDA 1 Excavation for foundation in earth, soil of all types, sand, gravel and Bd.A.1 Page Cubic Meter 112.00 11.00
soft murum, including removing the excavated material up to a distance No. 259
of 50 m. beyond the building area & stacking and spreading as directed,
dewatering, preparing the bed for the foundation and necessary back
filling, ramming, watering including shoring and strutting etc.
complete. (Lift upto 1.5 m.)
By Mechanical Means
Excavation 31.030 BDA 1 Excavation for foundation in earth, soils of all types, sand,gravel and Bd.A.1 Page Cubic Meter NA NA
soft murum, including removing the excavated material upto a distance No. 259
of 50 meters beyond the building area and stacking and spreading as
directed, dewatering, preparing the bed for the foundation and
necessary back filling, ramming, watering including shoring and
strutting etc. complete. (Lift from 1.5m to 3.0m)
By Manual Means
Excavation 31.040 BDA 1 Excavation for foundation in earth, soils of all types, sand,gravel and Bd.A.1 Page Cubic Meter 117.00 12.00
soft murum, including removing the excavated material upto a distance No. 259
of 50 metres beyond the building area and stacking and spreading as
directed, dewatering, preparing the bed for the foundation and
necessary back filling, ramming, watering including shoring and
strutting etc. complete. (Lift from 1.5m to 3.0m)
By Mechanical Means
Excavation 31.050 BDA 2 Excavation for foundation in hard murum including removing the Bd.A.2 Page Cubic Meter NA NA
excavated material upto distance of 50 metres beyond the building area No. 259
and stacking and spreading as directed, dewatering, preparing the bed
for the foundation and necessary back filling, ramming, watering
including shoring and strutting etc. complete. (Lift upto 1.50 m)
By Manual Means
Excavation 31.060 BDA 2 Excavation for foundation in hard murum including removing the Bd.A.2 Page Cubic Meter 118.00 13.00
excavated material upto distance of 50 metres beyond the building area No. 259
and stacking and spreading as directed, dewatering, preparing the bed
for the foundation and necessary back filling, ramming, watering
including shoring and strutting etc. complete. (Lift upto 1.50 m)
By Mechanical Means
Excavation 31.070 BDA 2 Excavation for foundation in hard murum including removing the Bd.A.2 Page Cubic Meter NA NA
excavated material upto a distance of 50 metres beyond the building No. 259
area and stacking and spreading as directed, dewatering, preparing the
bed for the foundation and necessary back filling, ramming, watering
including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m)
By Manual Means
Excavation 31.080 BDA 2 Excavation for foundation in Hard murum including removing the Bd.A.2 Page Cubic Meter 131.00 13.00
excavated material upto a distance of 50 metres beyond the building No. 259
area and stacking and spreading as directed, dewatering, preparing the
bed for the foundation and necessary back filling, ramming, watering
including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.)
By Mechanical Means
Excavation 31.090 BDA 3 Excavation for foundation in hard murum and boulders including Bd.A.3 Page Cubic Meter NA NA
removing the excavated material up to a distance 50 metres, beyond the No. 259
building area and stacking and spreading as directed, dewatering,
preparing the bed for the foundation and necessary back filling,
ramming, watering including shoring and strutting etc. complete. (Lift
upto 1.5m.)
By Manual Means
Excavation 31.100 BDA 3 Excavation for foundation in hard murum and boulders including Bd.A.3 Page Cubic Meter 131.00 13.00
removing the excavated material up to a distance 50 metres, beyond the No. 259
building area and stacking and spreading as directed, dewatering,
upto 1.5m.)
By Mechanical Means
per unit) per unit)
Excavation 31.110 BDA 3 Excavation for foundation in hard murum and boulders including Bd.A.3 Page Cubic Meter NA NA
removing the excavated material upto a distance of 50 metres, beyond No. 259
the building area and stacking and spreading as directed, dewatering,
from 1.5 m to 3.0 m.)
By Manual Means
Excavation 31.120 BDA 3 Excavation for foundation in Hard murum and boulders including Bd.A.3 Page Cubic Meter 143.00 17.00
removing the excavated material upto a distance of 50 metres, beyond No. 259
the building area and stacking and spreading as directed, dewatering,
from 1.5 m to 3.0 m.)
By Mechanical Means
Excavation 31.130 BDA 4 Excavation for foundation in Soft rock and old cement or lime masonry Bd.A.4 Page Cubic Meter NA NA
foundations including removing the excavated material upto a distance No. 259
of 50 metres beyond the building area and stacking as directed,
including dewatering, preparing the bed for the foundation and
necessary back filling with available earth /murum, ramming, watering
including shoring and strutting etc. complete (lift upto 1.5m)
By Manual Means
Excavation 31.140 BDA 4 Excavation for foundation in Soft rock and old cement or lime masonry Bd.A.4 Page Cubic Meter 248.00 25.00
necessary back filling with available earth /murum, ramming, watering
including shoring and strutting etc. complete (lift upto 1.5m)
By Mechanical Means
Excavation 31.150 BDA 4 Excavation for foundation in Soft rock and old cement or lime masonry Bd.A.4 Page Cubic Meter NA NA
of 50 meters beyond the building area and stacking as directed,
necessary back filling with available earth/murum, ramming ,watering
including shoring and strutting etc. complete. (Lift from 1.5m To 3.0
m.)
By Manual Means
Excavation 31.160 BDA 4 Excavation for foundation in Soft rock and old cement or lime masonry Bd.A.4 Page Cubic Meter 270.00 28.00
necessary back filling with available earth/murum, ramming ,watering
including shoring and strutting etc. complete. (Lift from 1.5m To 3.0
m.)
By Mechanical Means
Excavation 31.170 BDA 5 Excavation for foundation in Hard rock by blasting including trimming Bd.A.5 Page Cubic Meter 600.00 430.00
and leveling the bed by chiseling where necessary and removing the No. 259
excavated material and stacking it in measurable heaps within a
distance of 50 metres from the building area including dewatering and
back filling with available earth/murum, watering, ramming, etc.
complete. (Lift upto 1.5m)
Excavation 31.180 BDA 5 Excavation for foundation in Hard-rock by blasting including trimming Bd.A.5 Page Cubic Meter 625.00 430.00
and leveling the bed by chiselling where necessary and removing the No. 259
excavated material and stacking it in measurable heaps within a
distance of 50 metres from the building area including dewatering and
back filling with available earth/murum watering, ramming etc.
complete. (Lift from 1.5m To 3.0 m)
Excavation 31.190 BDA 5 B1 Excavation for foundation in Hard-rock by controlled blasting including Bd.A.5 Page Cubic Meter 785.00 524.00
trimming and leveling the bed by chiselling where necessary and No. 259
removing the excavated material and stacking it in measurable heaps
within a distance of 50 metres. from the building area including
dewatering and back filling with available earth soil /murum watering,
ramming etc. complete. (Lift upto 1.5m)
Excavation 31.200 BDA 6 Excavation for foundation in Hard rock by chiselling, wedging, line Bd.A.6 Page Cubic Meter 660.00 570.00
drilling, etc. including trimming and levelling the bed, removing the No. 260
excavated material upto a distance of 50 metres beyond the building
area stacking as directed, dewatering and back filling with available
earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m).
Excavation 31.210 BDA 7 Excavation for foundation in laterite rock (soft or hard) including Bd.A.7, Page Cubic Meter NA NA
trimming and levelling the bed for the foundation, removing the No. 260
excavated material up to a distance of 50 metres beyond the building
area, stacking as directed, dewatering and back filling with available
murum, watering, ramming etc. complete. (Lift upto 1.5 m.)
per unit) per unit)
Excavation 31.220 BDW Providing preconstructional antitermite treatment as per I.S. 6313 (Part- As directed by Square 50.00 5.00
II) by treating the bottom surface and sides of excavation at the rate of 5 Engineer in Meter
litres of emulsion concentrate of 0.5 percent of clorophyrifos per square charge.
meter of surface area covering 10 years guarantee on bond paper. ( AS
per Item no. 22.41 of schedule of rates of NBO )
II) treatment by treating the backfill in immediate contact with Engineer in Meter
foundation at the rate of 5 litres of emulsion concentrate of 0.5 percent charge.
of clorophyrifos per square metre of vertical surface area covering 10
years guarantee on bond paper. ( AS per Item no. 22.42 of schedule of
rates of NBO )
II) by treating the top surface of plinth filling at the rate of 5 litres of Engineer in Meter
emulsion concentrate at 0.5 percent of clorophyrifos per square metre charge.
of surface area covering ten years guarantee on bond paper. ( AS per
Item no. 22.43 of schedule of rates of NBO )
I) to the soil along the external face of building by punching holes of Engineer in Meter
1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to charge.
the wall as possible & to inject 0.5 percent of aldrin or clorophyrifos at
the rate of 7.5 litres per hole and sealing the same with proper filling &
covering 10 years guarantee on bond paper. ( AS per Item no. 22.44 of
schedule of rates of NBO )
Excavation 31.260 BDW Providing antitermite treatment to the wooden frames of As directed by Number 28.00 9.00
doors/windows of the existing building as per I.S. 6313 (Part-III) by Engineer in
drilling 6mm dia. holes at four corners on one side and four corners on charge.
other side at a downward angle of about 45 degree at the junction of
wood work and masonary and injecting 150 ml. of chlorodane 5%
W.C. and sealing by filling putty etc. complete covering 2 years
guarantee on bond paper.
Excavation 31.270 BDW Providing antitermite treatment to the joints of wooden beams/joist As directed by Number 17.00 5.00
used for the roof work of the existing building as per I.S. 6313 (Part-III) Engineer in
by drilling 6mm dia. holes at a downward angle of about 45 degree at charge.
the junction of wood work and masonary and injecting 80 ml. of
chlorodane 5% W.C. and sealing by filling putty etc. complete covering
2 years guarantee on bond paper.
Excavation 31.280 BDW Providing antitermite treatment to the sides of flooring of the existing As directed by Number 8.00 3.00
building as per I.S. 6313 (Part-III) by punching holes 6mm dia. drilled Engineer in
at a distance of 30cm. centre to centre and injecting one percent of charge.
chlorodane emulsion concentrate at the rate of 50 ml per hole and
sealing by filling putty etc. complete covering 2 years guarantee on
bond paper.
Excavation 31.290 BDW Providing antitermite treatment around the periphery of the existing As directed by Running 22.00 8.00
building as per I.S. 6313 (Part-III) by excavating trenches of 20cm Engineer in Meter
width and exposing the sides of columns and plinth beams upto a depth charge.
of 300mm and injecting one percent of chlorodane emulsion
concentrate at the rate of 2.25 litres per Rmt and refilling the trenches
etc. complete covering 2 years guarantee on bond paper.
Excavation 31.300 BDW Providing general pest control services to the building to control the As directed by Square 13.00 8.50
nuisance of cockroaches, lizards, pin bores and other insects etc. with 4 Engineer in Meter
operations in a year and monthly check up. charge.
Excavation 31.310 BDW Providing general pest control services to small size of inspection As directed by Number 58.00 17.00
chamber to control the nuisance of cockroaches during the year with Engineer in
monthly check up. charge.
Excavation 31.320 BDW Providing general pest control services to big size of inspection As directed by Number 106.00 18.00
chamber to control the nuisance of cockroaches during the year with Engineer in
monthly check up. charge.
Excavation 31.330 BDW Labour charges for removing grass, thorney shrubs, Jungli shrub, As directed by Square 10.00 10.00
Kubabul and alike grass along roadside making the ground clean by Engineer in Meter
showel and phavaras etc. complete. charge.
Excavation 31.340 BDW Removing grass, gazer grass and disposing off out of building premises As directed by Square 4.00 4.00
including making clean the ground by shovel and phavaras etc. Engineer in Meter
complete. charge.
Excavation 31.350 0 Excavation for foundation of structure as per drawing and technical 0 Cubic Meter NA NA
specification including setting out, construction of shoring , brushing,
bottom and back filling with approved material. Marshy Soil
Spec. No.: M.O.R.T & H - 304
Excavation 31.360 BDA 10 Filling in plinth and floors with approved excavated material in 15cm. Bd.A.10 Page Cubic Meter 55.00 44.00
to 20cm. layers including watering and compacting etc. complete. No. 262
Spec. No. : Bd.A. 11/Page No. 262
per unit) per unit)
Excavation 31.370 BDA 11 Filling in plinth and floors with contractors material/brought from Bd.A.11 Page Cubic Meter 265.00 63.00
outside and approved by Engineer incharge in layers of 15cm. to 20cm. No. 263
including watering and compaction etc. complete.
Spec. No. : Bd.A. 11/Page No. 263
Excavation 31.380 BDA 12 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm Bd.A. 12 Page Cubic Meter 405.00 58.00
to 20 cm thick including hand packing and compacting etc. complete. No. 264
Excavation 31.390 BDA 13 Providing and filling in the foundation with sand of approved quality Bd.A.13 Page Cubic Meter 451.00 46.00
including watering, compacting etc. complete. No. 264
Excavation 31.400 BDA Providing soling using 80 mm size trap metal in 15 cm. layer including As directed by Cubic Meter 550.00 44.00
filling voids with Crushed sand/grit, ramming, watering etc. complete. Engineer in
charge.
Report Name: e DSR
per unit) per unit)
Pile 32.01 Bd-B Providing M-20 RCC cast in situ single rim bored pile of As directed by Running NA NA
Foundation 225 mm dia. each of load capacity as per design and of Engineer in Meter
: Building specified diameter of pile and bulb as directed, sunk to the charge
required depth through all strata except rock, excluding
provision of reinforcement including placing reversible
drum type concrete mixer concrete by tremie arrangement,
compaction of concrete including chipping and dressing
including chipping and dressing if required etc. complete.
drum type concrete mixer concrete by tremie arrangement
etc. complete.
etc. complete.
etc. complete.
etc. complete.
etc. complete.
?etc. complete.
per unit) per unit)
required depth through all strata except rock,excluding
etc. complete.
Pile 32.09 Bd-B Providing M-25 RCC cast insitu single rim bored pile of As directed by Running NA NA
etc. complete.
etc. complete.
Pile 32.11 Bd-B Providing M-20 RCC cast in situ double rim bored pile of As directed by Running NA NA
etc. complete.
Pile 32.12 Bd-B Providing M-20 RCC cast insitu double rim bored pile of As directed by Running NA NA
etc. complete.
etc. complete.
etc. complete.
per unit) per unit)
provision of reinforcement including placing concrete
prepared in reversible drum type concrete mixer by tremie
arrangement, compaction of concrete including chipping
and dressing etc. complete.
Spec. No. : I.S. 2911 ? Part I 1964 Clause No. 6.1.5.
Spec. No. : I.S. 2911 ? Part I 1964 Clause
No. 6.1.5.
per unit) per unit)
Pile 32.21 Bd/B-4 Providing M-30 R.C.C. cast in situ bored piles each of load As directed by Running NA NA
Foundation P-270 capacity and as per design and of 325 mm diameter or as Engineer in Meter
: Building directed placed through steel shells sunk to the required charge
depth through all strata except rock excluding provision of
reinforcement as per detailed drawings and design
approved by the Engineer-incharge including placing
concrete by tremie arrangements, compaction of concrete
including chipping and dressing and withdrawal of shell
etc. complete.
.
Foundation P-270 capacity and as per design and of 350mm diameter or as Engineer in Meter
etc. complete.
Foundation P-270 capacity and as per design and of 400 mm diameter.or as Engineer in Meter
etc. complete.
etc. complete.
etc. complete.
per unit) per unit)
etc. complete.
etc. complete.
etc. complete.
etc. complete.
etc. complete.
per unit) per unit)
etc. complete.
etc. complete.
Foundation P-270 capacity and as per design and of 800 mm diameter. or as Engineer in Meter
etc. complete.
etc. complete.
etc. complete.
per unit) per unit)
etc. complete.
etc. complete.
etc. complete.
Pile 32.39 Bd/B-2 Chiseling through pile shells in hard strata like boulders, As directed by Rig Hour NA NA
Foundation P-269 soft and hard rocks Upto and inclusive of 550 mm diameter Engineer in
: Building including removing and stacking the loose materials etc. charge
complete
and disposing of the unserviceable materials outside
complete.
.
Foundation P-269 soft and hard rocks Beyond 550 mm and upto and Engineer in
: Building inclusive of 750 mm dia. including removing and stacking charge
the loose materials etc. complete
and disposing of the unserviceable materials outside
complete.
: Building inclusive of 900 mm dia including removing and stacking charge
the loose materials etc. complete and disposing of the
unserviceable materials outside complete.
: Building inclusive of 1050 mm dia. including removing and charge
stacking the loose materials etc. complete and disposing of
the unserviceable materials outside complete.
per unit) per unit)
Pile 32.43 Bd/B-8 Carrying out load test for 1.5 times the proposed safe As directed by No. NA NA
Foundation P-271 working load on the pile in driven position upto 400 mm Engineer in
: Building diameter including construction of test cap, use of charge
accessories and instruments including providing graphs as
per I.S. code or Std.Specifications and dismantling the test
cap after testing and cleaning the site complete.
Foundation P-271 working load on the pile in driven position above 400 mm Engineer in
: Building and upto to 550 mm diameter including construction of test charge
cap, use of accessories and instruments including providing
graphs as per I.S. code or Std.Specifications and
dismantling the test cap after testing and cleaning the site
complete.
: Building and upto 650 mm diameter including construction of test charge
complete.
complete.
complete.
complete.
: Building diameter including construction of test cap, use of charge
accessories and instruments including providing graphs as
per I.S. code or Std.Specifications and dismantling the test
cap after testing and cleaning the site complete.
Pile 32.50 Empty boring for 325 to 400 mm dia bored R.C.C. cast in As directed by Running NA NA
Foundation situ piles including withdrawal of shell, removal of earth to Engineer in Meter
: Building a distance of 50 metres etc. complete. charge
Spec :(As directed by Engineer in Charge)
per unit) per unit)
Pile 32.51 Empty boring for 425 to 500 mm dia. bored R.C.C. cast in As directed by Running NA NA
Foundation situ piles including withdrawal Engineer in Meter
: Building of shell, removal of earth to a distance of 50 metres etc. charge
complete.
Pile 32.55 Chipping and dressing of the R.C.C. piles upto 0.60 As directed by Nos. NA NA
Foundation meterincluding cleaning reinforcement and removal of Engineer in
: Building dismantled materials upto a distance of 50 meter beyond charge
the building area etc. for providing pile caps.
Spec :(As directed by Engineer in Charge
Pile 32.56 Providing bentonite slurry process for various diameter of As directed by Running NA NA
Foundation piles vide Item Nos 1 (i to xxiv) above. Engineer in Meter
: Building Spec : (As directed by Engineer in Charge) charge
Pile 32.57 Providing placing and Driving in position 6 millimeter mild As directed by MT NA NA
Foundation steel liner for R.C.C. Piles upto required depth with 12mm Engineer in
: Building thick mild steel cutting edge of 0.50m length at bottom charge
including fabricating cutting the mild steel sheet to required
diameter and shape ,welding the joints and driving with the
help of required machineries including all materials labours
and lifts etc. complete as directed by the Engineer in
charge.
Upto 3.00 meter deep liner
Pile 32.58 Providing placing and Driving in position 6 millimeter mild As directed by MT NA NA
Foundation steel liner for R.C.C. Piles upto required depth with 12mm Engineer in
: Building thick mild steel cutting edge of 0.50m length at bottom charge
including fabricating cutting the mild steel sheet to required
diameter and shape ,welding the joints and driving with the
help of required machineries including all materials labours
and lifts etc. complete as directed by the Engineer in
charge.
Spec :(As directed by Engineer in Charge
From 3.00 to 9.50 meter deep liner
Pile 32.59 Providing and casting in situ cement concrete M-20 of trap As directed by Cum NA NA
Foundation metal for R.C.C. pile caps as per detailed designs and Engineer in
: Building drawings, including bailing out water manually, centering, charge
formwork, compacting, finishing and curing etc. complete.
(Excluding steel reinforcement)
Spec. No.: BdF-1 Page No. 297
per unit) per unit)
Pile 32.62 Providing and casting in situ cement concrete M20 of trap/ As directed by Cum NA NA
Foundation granite/ quartzite/ gneiss metal for reinforced cement Engineer in
: Building concrete pile caps as per detailed design and drawing charge
including bailing out water manually , form work,
compacting, finishing and curing with fully automatic
microprocessor based PLC with SCADA enabled
reversible drum type Mixer etc. complete. (excluding steel
reinforcement)
Spec. No. Bd.F 1 Page No.297
Pile 32.63 Providing and casting in situ cement concrete M20 of trap/ As directed by Cum NA NA
Foundation granite/ quartzite/ gneiss metal for reinforced cement Engineer in
: Building concrete pile caps as per detailed design and drawing charge
including bailing out water manually , form work,
compacting, finishing and curing with fully automatic
microprocessor based PLC with SCADA enabled concrete
Batch mix plant (Pan mixer) etc complete (excluding steel
reinforcement)
Spec. No. Bd.F 1 Page No.297
Report Name: e DSR
No. Specificatio (Completed (Labour Rate
n Rate In Rs. In Rs. per
per unit) unit)
Structural 33.01 BDC 2 Providing and fabricating structural steel work Bd.C.2 Page Metric 56400.00 7144.00
Steel in rolled sections like joists, channels, angles, No. 275 Tonne
Work tees etc. as per detailed design and drawings or
as directed including cutting, fabricating,
hoisting, erecting, fixing in position making
riveted / bolted /welded connections without
connecting plates, braces etc. and including
one coat of anticorrosive paint and over it two
coats of oil painting of approved quality and
shade etc. complete.
Structural 33.02 BDC 3 Providing and fabricating structural steel work Bd.C.3 Page Metric 50800.00 5544.00
Steel in rolled sections, fixed with connecting plates No. 275 Tonne
Work or angle cleats in main and cross beams, hip
and jack rafters, purlins connecting to truss
members and the like, as per detailed designs
and drawing or as directed including cutting,
fabricating, hoisting, erecting, fixing in
position, making riveted/ bolted/ welded
connections and one coat of anticorrosive
paint and over it two coats of oil painting of
approved quality and shade etc. complete.
Structural 33.03 BDC 6 Providing structural steel work in single Bd.C.6 Page Metric 51250.00 6086.00
Steel stanchions composed of R.S.J. Channel etc. No. 277 Tonne
Work with caps, bases, mild steel plated, angle
brackets, cleats, gusset plates, anchor bolts etc.
as per detailed designs and drawings or as
directed including cutting, fabrication,
hoisting, erecting fixing in position, making
riveted/ bolted/ welded connection and one
coat of anticorrosive paint and over it two.
coats of oil painting approved quality and
shade etc. complete.
Structural 33.04 BDC 8 Providing structural steel work in trusses, Bd.C.8 Page Metric 63800.00 7950.00
Steel other similar trussed purlins and members with No. 278 Tonne
Work all bracing, gusset plates etc. as per detailed
designs and drawings or as directed including
cutting, fabricating, hoisting, erecting fixing in
position, Making riveted/ bolted/ welded
connection and one coat of anticorrosive paint
and over it 2 coats of oil painting approved
quality and shade etc. complete.
Structural 33.05 BDC Providing and fixing 50 mm. dia. medium As directed Square NA NA
Steel class G.I.pipe gate with wicket gate of by Engineer Meter
Work approved drawing with all fixtures & fittings in charge.
in two leaves with strong hold fast embedded
in c.c. block at top & bottom with locking
arrangement including cutting, bending,
making holes and with one coat of primer etc.
complete.
per unit) unit)
Structural 33.06 BDC Providing and erecting structural steel for As directed Metric 74000.00 11280.00
Steel sakav with all bracing gusset plates etc. as per by Engineer Tonne
Work detailed design and drawing or as directed in charge.
including cutting, fabricating, hoisting,
erecting, fixing in position, making riveted/
bolted/welded connection and oil painting with
2 coats of approved quality and shade etc.
complete. complete.
Structural 33.07 BDC Providing, fabricating and erecting at site of B-18 Page Metric 74000.00 9873.00
Steel work the tubular steel structure (shed) as per No. 78 Tonne
Work standard design and specifications having
various spans in between trusses and in
multiples of standard length of bays as
specified as per standard specifications,
inclusive of cost of steel tubular trusses,
tubular columns purlins, tie runners,
foundation bolts, base plates, nuts and bolts,
welding wherever required etc. as per detailed
drawing inclusive of one coat of anticorrosive
paint and two coats of oil painting of approved
quality and shade etc. complete.
Spec. No. : As directed by Engineer-in-charge.
Structural 33.08 BDC Providing Gas or Electrical welding for B.18, Page Centimete 5.00 2.00
Steel structural steel section, plates as per detailed No 78 r
Work drawing. For less than 10 mm thick section.
Structural 33.09 BDW Providing and fixing mild steel grill gate as per Spec. No. Square NA NA
Steel 6A the detailed drawing including hinges, locking As directed Metre
Work arrangements and painting in three coats of oil byEngineer
paint of approved colour and shade etc. in Charge.
complete.(weight 18 kg. to 20 kg. Per Sq.m.)
Spec.No.: As directed by Engineer- in-charge.
Structural 33.10 BDW Providing and fixing mild steel grill gate with Spec.No.: Square 1789.00 200.00
Steel 6 angle iron frame 65 mm x 65 mm x 10 mm Bd.W.6/Pag Metre
Work with iron bars at 150 mm C/C and diagonal e No.585
flats as per the detailed drawing including
hinges, pivot blocks locking arrangement
welding, revetting with oil painting in three
coats of approved colour shade. (Weight of
gate 35 kg/Sq.m.)
Structural 33.11 Providing structural steel work of rectangular Spec. No. M.T. NA NA
Steel hollow steel section for steel trusses, other As directed
Work similar trussed items like purlin and members byEngineer
with all bracing, gusset plates etc. as per in Charge.
detailed designs and drawings or as directed
including cutting, fabricating, hoisting,
erecting, fixing in position making
riveted/bolted/ welded connections and one
coat of anticorrosive paint and over it two
coats of oil painting of approved quality and
shade complete. Spec. No. : As directed by
Engineer-in-charge.
per unit) unit)
Structural 33.12 Providing structural steel work in hollow Spec. No. M.T. NA NA
Steel section of various thickness and sizes in As directed
Work square, rectanular and round shape from byEngineer
25mm to 450mm section as per IS 4923 YST in Charge.
310 Grade produced from iron ore and blast
furnace route etc. as per detailed designs and
drawing or as directed including cutting,
fabricating, hoisting, erecting, fixing in
position, making riveted/bolted/ welded
connections and painting complete.
Report Name: e DSR
Rate In Rs. In Rs. per
per unit) unit)
Plain 34.01 BDE 1 Providing and laying in situ, cement concrete in M- Bd. E. 1 Page Cubic NA NA
Cement 10 of trap/ granite/ quartzite/ gneiss metal for No. 287 Meter
Concrete foundation and bedding including bailing out
water, formwork, compacting and curing complete,
with fully automatic micro processor based PLC
with SCADA enabled reversible Drum Type
mixer, With natural sand.
Plain 34.02 BDE 1 Providing and laying in situ, cement concrete in M- Bd. E. 1 Page Cubic NA NA
Cement 10 of trap/ granite/ quartzite/ gneiss metal for No. 287 Meter
Concrete foundation and bedding including bailing out
water, formwork, compacting and curing complete
with fully automatic micro processor based PLC
with SCADA enabled reversible Drum Type mixer
. With crushed sand.
Plain 34.03 0 Providing and laying in situ cement concrete M 10 Spec. No. 0 NA NA
Cement of trap / granite / quartzite / gneiss metal for Bd.E. 1 Page
Concrete foundation and bedding including dewatering, No. 287
form work, compacting, roughening them if special
finish is to be provided, finishing if required and
curing with fully automatic microprocessor based
PLC with SCADA enabled concrete Batch mix
plant (Pan mixer)
etc. complete.
Plain 34.04 BDE 2 Providing and casting in situ cement concrete in Bd.E.2 Page Cubic 4248 480
Cement M15 of trap/ granite/quartzite/gneiss metal for No. 288 and Meter
Concrete steps including steel centering, plywood/steel B.7 Page No
formwork, compacting, roughening them if special 38
finish is to be provided, finishing uneven and
honeycombed surface and curing etc. complete.
The Cement Mortar 1:3 plaster is considered for
rendering uneven and honeycombed surface, only.
Newly laid concrete shall be covered by gunny
bag, plastic, tarpaulin etc. (Wooden centering will
not be allowed.),with fully automatic micro
processor based PLC with SCADA enabled
reversible Drum Type mixer ... With natural sand.
not be allowed.), with fully automatic micro
reversible Drum Type mixer .. With Crushed sand.
per unit) unit)
Cement M20of trap/ granite/quartzite/gneiss metal for steps No. 288 and Meter
Concrete including steel centering, plywood/steel formwork, B.7 Page No
compacting, roughening them if special 38
reversible Drum Type mixer .. With Natural sand.
reversible Drum Type mixer .. With Crushed sand.
Cement M15 of trap/ granite/quartzite/gneiss metal for bed No. 289 and B- Meter
Concrete blocks, foundation blocks and such other items 7, Page No.38
including bailing out water, plywood/steel
formwork, compacting, roughening them if special
rendering uneven and honeycombed surface only.
bag, plastic,
tarpaulin etc. (Wooden centering will not be
allowed.), with fully automatic micro processor
based PLC with SCADA enabled reversible Drum
Type mixer . . With natural sand.
per unit) unit)
bag, plastic,
Type mixer . . With crushed sand.
bag, plastic,
Type mixer . . With Natural sand.
bag, plastic,
Type mixer . . With crushed sand.
Plain 34.12 BDE 7 Providing and casting in situ cement concrete in M- Bd.E.7 Page Cubic 10680 885
Cement 20 of trap / granite /quartzite/ gneiss metal for No 291 and B- Meter
Concrete arches including skew backs as per detailed 7 Page No .38
drawing or as directed in superstructure including
centering, form work, compacting, finishing with
minimum thickness of 1:3 cement plaster to give a
smooth and even surface or roughening them if
special finish is to be provided and curing and
finishing if required complete, with fully automatic
micro processor based PLC with SCADA enabled
reversible Drum Type mixer . complete, . With
natural sand.
per unit) unit)
Plain 34.13 BDE 7 Providing and casting in situ cement concrete in M- Bd.E.7 Page Cubic 10580 885
Cement 20 of trap / granite /quartzite/ gneiss metal for No 291 and B- Meter
Concrete arches including skew backs as per detailed 7 Page No .38
drawing or as directed in superstructure including
centering, form work, compacting, finishing with
minimum thickness of 1:3 cement plaster to give a
smooth and even surface or roughening them if
special finish is to be provided and curing and
finishing if required complete, with fully automatic
micro processor based PLC with SCADA enabled
reversible Drum Type mixer etc. complete, With
Crushed Sand.
Plain 34.14 BDE Providing and casting in situ cement concrete in Bd.E. 5/Page Cubic NA NA
Cement 5 M15 of trap/ granite/quartzite/gneiss metal for No. 290/I.S. Meter
Concrete plain or molded sills, cornice, jambs, block in 456 (2000)
course, or architraves of required size and shapes
including steel centering, plywood/steel formwork,
compacting, roughening them if special finish is to
be provided,finishing uneven and honeycombed
surface and curing etc. complete. The Cement
Mortar 1:3 plaster is considered for rendering
uneven and honeycombed surface only. Newly laid
concrete shall be covered by gunny bag, plastic,
allowed.) with fully automatic micro processor
Type mixer etc. complete, With Natural Sand.
Plain 34.15 BDE Providing and casting in situ cement concrete in Bd.E. 5/Page Cubic NA NA
Cement 5 M20 of trap/ granite/quartzite/gneiss metal for No. 290/I.S. Meter
Concrete plain or molded sills, cornice, jambs, block in 456 (2000)
course, or architraves of required size and shapes
including steel centering, plywood/steel formwork,
compacting, roughening them if special finish is to
be provided,finishing uneven and honeycombed
surface and curing etc. complete. The Cement
Mortar 1:3 plaster is considered for rendering
allowed.) with fully automatic micro processor
Type mixer etc. complete, With Natural Sand.
Plain 34.16 BDE Providing and casting in situ cement concrete M- Bd.E. 3/Page Cubic NA NA
Cement 3 15 of trap/ granite/quartzite/gneiss metal for coping No. 288/I.S. Meter
Concrete to plinth or parapet, moulded or chamfered as per 456 (2000)
drawing or as directed including steel centering,
plywood/steel formwork compacting, roughening
them if special finish is to be provided, finishing
uneven and honeycombed surface and curing etc.
complete. The Cement Mortar 1:3 plaster is
considered for rendering
allowed.)
per unit) unit)
Plain 34.17 BDE 7 Providing and casting in situ cement concrete as Spec No. : As Cubic NA NA
Cement per IS 2185-1967 hollow block 200mm x 200mm directed by Meter
Concrete x 400mm in cement mortar 1:6 for superstructure Engineer in
including curing, scaffolding and cement pointing charge.
from outside etc. complete.
Plain 34.18 BDE 8 Providing and reconstructing 1:5:10 cement Spec No. : As Cubic NA NA
Cement concrete solid block 300mm x 200mm x 150mm in directed by Meter
Concrete cement mortar 1:6 for external block masonry with Engineer in
scaffolding, curing etc. complete. charge.
Plain 34.19 BDF Providing and laying 50 mm thick layer in cement Spec.No.: As Cubic NA NA
Cement 27 mortar 1:8 below plinth beam including floating, directed by Meter
Concrete watering, curing and leveling and ramming the bed Engineer- in-
if necessary before laying the layer etc. complete. charge.
Report Name: e DSR
per unit) unit)
Reinforced 35.01 BDF 3 Providing and laying in situ cement concrete M-20 of trap / Bd.F.3 Page Cubic 4969.00 1060.00
Cement granite /quartzite/ gneiss metal for R.C.C. work in foundations No. 298 and Meter
Concrete like raft, strip foundations, grillage and footings of R.C.C. B.7, Page
columns and steel stanchions etc. including bailing out water, No.38
formwork, cover blocks compaction and curing roughening the
surface if special finish is to be provided (Excluding
reinforcement and structural steel) etc. etc. complete, With fully
reversible drum type concrete mixer . With natural sand.
reinforcement and structural steel ) etc. etc. complete, With fully
reversible drum type concrete mixer. . With Crushed sand.
formwork ,cover blocks compaction and curing roughening the
reversible drum type concrete mixer.. With natural sand.
reversible drum type concrete mixer...With Crushed sand.
reversible drum type concrete mixer. With natural sand.
Cement granite /quartzite/ gneiss ?metal for R.C.C. work in foundations No. 298 and Meter
reversible drum type concrete mixer. With Crushed sand.
per unit) unit)
reversible drum type concrete mixer. With natural sand.
reversible drum type concrete mixer.. With Crushed sand.
reinforcement and structural steel) etc. complete With fully
reversible drum type concrete mixer. With Natural sand.
reinforcement and structural steel) etc. complete With fully
reversible drum type concrete mixer...With Crushed sand.
reinforcement and structural steel) etc. etc. complete, with fully
concrete batch mix plant With Natural Sand
reinforcement and structural steel) etc. complete, with fully
concrete batch mix plant (pan mixer).. . With Crushed sand.. .
per unit) unit)
formwork ,cover blocks compaction and curing roughening the
reinforcement and structural steel) etc. complete, with fully
concrete batch mix plant (pan mixer).... With natural sand.
Reinforced 35.14 BDF 3 Providing and casting in situ cement concrete M-25 of trap / Bd.F.3 Page Cubic 5865.00 1060.00
columns and steel stanchions etc. columns as per detailed No.38
designs and drawings or as directed including centering,
formwork, cover blocks compacting and roughening if special
finish is to be provided and curing etc. complete. (Excluding
reinforcement and structural steel).with fully automatic micro
plant (pan mixer).... With Crushed sand.
designs and drawing or as directed including centering,
formwork, cover blocks compaction finishing the formed
surfaces with cement mortar 1:3 of sufficient minimum
thickness to give a smooth and even surface or roughening if
special finish is to be provided and curing etc. complete.
(Excluding reinforcement and structural steel ).with fully
special finish is to be provided and curing etc.
complete,(Excluding reinforcement and structural steel).with
fully automatic micro processor based PLC with SCADA
enabled concrete batch mix plant (pan mixer).... With Crushed
sand.
enabled concrete batch mix plant (pan mixer).... With natural
sand.
per unit) unit)
(Excluding reinforcement and structural steel).with fully
concrete batch mix plant (pan mixer).... With Crushed sand.
(Excluding reinforcement and structural steel). with fully
Cement granite /quartzite/ gneiss metal for R.C.C. columns as per No. 300 and Meter
Concrete detailed designs and drawing or as directed including centering, B.7, Page.No.
formwork, cover blocks compaction finishing the formed 38
(Excluding reinforcement and structural steel).With fully
reversible drum type concrete mixer With Natural sand.
complete,(Excluding reinforcement and structural steel).With
enabled reversible drum type concrete mixer With Crushed sand.
per unit) unit)
Cement granite /quartzite/ gneiss metal for R.C.C. columns as per No. 300 and B- Meter
Concrete detailed designs and drawings or as directed including centering, 7,Page No 38.
reinforcement).With fully automatic micro processor based PLC
with SCADA enabled reversible drum type concrete mixer With
natural sand.
einforcement and structural steel).With fully automatic micro
concrete mixer With Crushed sand.
reinforcement and structural steel). With fully automatic micro
concrete mixer With natural sand.
concrete mixer With Crushed sand.
enabled reversible drum type concrete mixer With Natural sand
formwork, ?cover blocks compaction finishing the formed 38
enabled reversible drum type concrete mixer With Crushed sand
per unit) unit)
enabled reversible drum type concrete mixer With natural sand.
complete,(Excluding reinforcement and structural steel). With
sand.
sand.
plant (pan mixer).... With natural sand.
plant (pan mixer).... With Crushed sand.
per unit) unit)
formwork,cover blocks compaction finishing the formed 38
sand.
complete,(Excluding reinforcementand structural steel).with
sand.
sand.
sand.
sand.
formwork,cover blocks compaction finishing the formed 38
complete,(Excluding reinforcement and structural steel). with
sand.
per unit) unit)
Reinforced 35.41 BDF 6 Providing & casting in situ cement concrete M-20 of trap / Bd.F.6 Page Cubic 7495.00 1505.00
Cement granite /quartzite/ gneiss metal for R.C.C. beams and lintels as No. 300 and Meter
Concrete per detailed designs & drawings or as directed including B.7, Page
centering, formwork, cover blocks compaction & roughening the No.38
surface if special finish is to be provided & curing etc. complete.
(Excluding reinforcement and structural steel). With fully
reversible drum type concrete mixer With Crushed sand.
Reinforced 35.42 BDF 6 Providing and casting in situ cement concrete in M-25 of trap/ Bd.F.6 Page Cubic 8265.00 1505.00
Cement granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as No. 300 and Meter
Concrete per detailed designs and drawings or as directed including B.7, Page
centering, formwork, cover blocks compaction and roughening No.38
the surface if special finish is to be provided and curing etc.
complete. (Excluding reinforcement and structural steel).With
complete. (Excluding reinforcement and structural steel). With
(Excluding reinforce-mentand structural steel).With fully
reversible drum type concrete mixer With natural sand.
(Excluding .reinforcement and structural steel).With fully
per unit) unit)
(Excluding reinforcement and structural steel). With fully
concrete batch mix plant (pan mixer).... With Crushed sand..
complete. (Excluding reinforcement and structural steel).with
sand.
complete. (Excluding reinforcement and structural steel). with
sand.
concrete batch mix plant (pan mixer).... ?With natural sand.
per unit) unit)
concrete batch mix plant (pan mixer).... With natural sand
concrete batch mix plant (pan mixer)....With natural sand
Reinforced 35.60 BDF 8 Providing and casting in situ cement concrete M-20 of trap/ Bd.F.8 Page Cubic 8305.00 1505.00
Cement granite / quartzite/ gneiss metal for R.C.C. slabs and landings No. 302 and Meter
Concrete canopy as per detailed designs and drawings including B.7, Page
centering, formwork, cover blocks compaction finishing the No.38
formed surfaces with cement mortar 1:3 of sufficient minimum
Cement granite/ quartzite/ gneiss metal for R.C.C. slabs and landings No. 302 and Meter
per unit) unit)
Concrete canopy, waist slab with steps as per detailed designs and B.7, Page
drawings including centering, formwork, cover blocks No.38
compaction finishing the formed surfaces with cement mortar
1:3 of sufficient minimum thickness to give a smooth and even
surface or roughening if special finish is to be provided and
curing etc. complete,(Excluding reinforcement and structural
steel). With fully automatic micro processor based PLC with
SCADA enabled reversible drum type concrete mixer With
Crushed sand
centering, formwork,cover blocks compaction finishing the No.38
enabled reversible drum type concrete mixer With Crushed sand
centering, formwork,cover blocks compaction finishing the No.38
per unit) unit)
sand.
sand.
sand.
sand.
per unit) unit)
sand.
sand.
sand.
sand.
sand
sand.
Report Name: e DSR
per unit) unit)
Reinforced 36.01 BDF 9 Providing & casting in situ cement concrete M-20 of trap/ Bd.F.9 Page Cubic 8700.00 1505.00
Cement granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed No. 303 and Meter
Concrete design & drawings including centering, formwork, cover B.7, Page
blocks compacting , curing , finishing & roughening the No.38
surface if special finish is to be provided & curing complete.
reversible drum type concrete mixer
With natural sand.
With Crushed sand.
With natural sand.
With Crushed sand.
concrete batch mix plant (pan mixer)....
With natural sand.
blocks compacting , curing , finishing & rougheningthe surface No.38
if special finish is to be provided & curing complete.
Concrete design & drawings including centering, formwork, ?cover B.7, Page
blocks compacting & roughening the surface if special finish is No.38
to be provided & curing complete. (Excluding reinforcement
and structural steel).with fully automatic micro processor based
PLC with SCADA enabled concrete batch mix plant (pan
mixer).... With natural sand.
per unit) unit)
Reinforced 36.08 BDF9 Providing & casting in situ cement concrete M-25 of trap/ Bd.F.9 Page Cubic 9790.00 1505.00
concrete batch mix plant (pan mixer)....
With Crushed sand.
Reinforced 36.09 BDF10 Providing and casting in situ cement concrete M-20 of trap / 0 0 NA NA
Cement granite / quartzite / gneiss metal for R.C.C. canopy as per
Concrete detailed designs and drawings including centering, formwork,
compacting and roughening the surface if special finish is to be
provided and curing etc. complete (excluding reinforcement).
With natural sand
Cement granite / quartzite / gneiss metalfor R.C.C. canopy as per
provided and curing etc. complete (excluding
reinforcement).With crushed sand
reinforcement).With natural sand
reinforcement).With crushed sand
Cement granite/ quartzite/ gneiss metal for R.C.C. pardi of required No. 304 and Meter
Concrete thickness including centering, formwork, cover blocks B.7, Page No.
compacting , curing , finishing & roughening them if special 38
finish is to be provided and curing complete. (Excluding
processor based PLC with SCADA enabled reversible drum
type concrete mixer. with reversible Drum Type mixer with
SCADA With natural sand.
Reinforced 36.14 BDF 11 Providing and casting in situ cement concrete in M-20 of Bd.F.11 Page Cubic 9070.00 1505.00
Cement trap/granite/quartzite/gneiss metal for R.C.C. pardi of required No. 304 and Meter
reinforcement and structural steel).With fully automatic micro
type concrete mixer With Crushed Sand.
Concrete thickness including centering, formwork, cover B.7, Page No.
blockscompacting , curing , finishing & roughening them if 38
special finish is to be provided and curing complete.
reversible drum type concrete mixer.With natural sand.
type concrete mixer With Crushed Sand.
per unit) unit)
compacting , curing , finishing & rougheningthem if special 38
finish is to be provided and curing complete.(Excluding
plant (pan mixer).... With natural sand.
compacting and roughening them if special finish is to be 38
provided and curing complete. (Excluding reinforcement and
structural steel).with fully automatic micro processor based
mixer).... With Crushed Sand.
provided and curing complete.(Excluding reinforcement and
structural steel).with fully automatic micro processor based
mixer).... With natural sand.
provided and curing complete. (Excluding reinforcement and
structural steel). with fully automatic micro processor based
mixer).... With Crushed Sand.
Reinforced 36.21 BDF 12 Providing and casting in situ cement concrete in M-20 of trap/ Bd. F. 12 Page Cubic 5920.00 1515.00
Cement granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or No. 304 & B- Meter
Concrete parapet and sill of doors and windows moulded as per detailed 7, Pg 38
drawings or chamfered as approved by the Engineer including
centering, formwork, cover blocks compacting , curing ,
finishing & roughening them if special finish is to be provided
and curing complete. (Excluding reinforcement and structural
steel).With fully automatic micro processor based PLC with
natural sand.
Crushed Sand.
steel).with fully automatic micro processor based PLC with
SCADA enabled concrete batch mix plant (pan mixer).... With
natural sand.
per unit) unit)
Crushed Sand.
Reinforced 36.25 BDF 13A Providing and casting in situ cement concrete in M-20 of trap / Bd. F. 13 Page Cubic NA NA
Cement quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps No. 305 /I.S. Meter
Concrete of staircases as per detailed design and drawings or as directed 456 (2000
including steel centering, plywood/ steel formwork, steel props,
compaction, finishing uneven and honeycombed surface with
C.M. 1:3 of sufficient minimum thickness to give a smooth and
even surface or roughening the surface if special finish is to be
provided and curing etc. complete. (Excluding einforcement,
including cover block).(Newly laid concrete shall be covered by
gunny bag, plastic, tarpaulin etc.) (Wooden centering will not
be allowed)
Cement quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps No. 305 /I.S. Meter
Concrete of staircases as per detailed design and drawings or as directed 456 (2000
including steel centering, plywood/ steel formwork, steel props,
provided and curing etc. complete. (Excluding einforcement,
including cover block).(Newly laid concrete shall be covered by
gunny bag, plastic, tarpaulin etc.) (Wooden centering will not
be allowed)
Cement quartzite /granite /gneiss metal for R.C.C.newel posts of No. 305 /I.S. Meter
Concrete staircase as per detailed design and drawings including steel 456 (2001
centering, plywood / steel formwork, steel props, compaction,
finishing uneven and honeycombed surface with C.M.1:3 of
sufficient minimum thickness to give a smooth and even
surface or roughening the surface if special finish is to be
provided and curing etc. complete. (Excluding reinforcement,
including cover block). (Newly laid concrete shall be covered
by gunny bag, plastic, tarpaulin etc.) (Wooden centering will
not be allowed)
Cement quartzite /granite /gneiss metal for R.C.C.newel posts of No. 305 /I.S. Meter
Concrete staircase as per detailed design and drawings including steel 456 (2002
centering, plywood / steel formwork, steel props, compaction,
finishing uneven and honeycombed surface with C.M.1:3 of
sufficient minimum thickness to give a smooth and even
surface or roughening the surface if special finish is to be
including cover block). (Newly laid concrete shall be covered
by gunny bag, plastic, tarpaulin etc.) (Wooden centering will
not be allowed)
Reinforced 36.29 BDF 15A Providing and casting in situ cement concrete in M-20 of trap Bd. F. 15 Page Cubic NA NA
Cement /granite / gneiss/ quartzite metal for R.C.C. arches with skew No. 306 /I.S. Meter
Concrete backs as per detailed design and drawings or as directed 456 (2003
including steel centering, plywood/steel formwork, steel props,
including cover block). Newly laid concrete shall be covered by
gunny bag, plastic, tarpaulin etc. (Wooden centering will not be
allowed)
per unit) unit)
Reinforced 36.30 BDF 15A Providing and casting in situ cement concrete in M-25 of trap Bd. F. 15 Page Cubic NA NA
Cement /granite / gneiss/ quartzite metal for R.C.C. arches with skew No. 306 /I.S. Meter
Concrete backs as per detailed design and drawings or as directed 456 (2003
including steel centering, plywood/steel formwork, steel props,
including cover block). Newly laid concrete shall be covered by
gunny bag, plastic, tarpaulin etc. (Wooden centering will not be
allowed)
Reinforced 36.31 BDF 16 Providing and casting in situ cement concrete in M-20 of trap / Bd. F. 16 Page Cubic NA NA
Cement granite /gneiss / quartzite metal for R.C.C. fins of required No. 306 /I.S. Meter
Concrete thickness in position as shown on the drawings or as directed 456 (2004
by Engineer-in-charge including steel centering, plywood / steel
formwork, steel props, compaction, finishing uneven and
honeycombed surface with C.M. 1:3 of sufficient minimum
thickness to give a smooth and even surface or roughening the
surface if special finish is to be provided and curing etc.
complete. (Excluding reinforcement, including cover block)
Newly laid concrete shall be covered by gunny bag, plastic,
tarpaulin etc. (Wooden centering will not be allowed)
Reinforced 36.32 BDF 16 Providing and casting in situ cement concrete in M-25 of trap / Bd. F. 16 Page Cubic NA NA
Cement granite /gneiss / quartzite metal for R.C.C. fins of required No. 306 /I.S. Meter
Concrete thickness in position as shown on the drawings or as directed 456 (2004
by Engineer-in-charge including steel centering, plywood / steel
formwork, steel props, compaction, finishing uneven and
honeycombed surface with C.M. 1:3 of sufficient minimum
thickness to give a smooth and even surface or roughening the
surface if special finish is to be provided and curing etc.
complete. (Excluding reinforcement, including cover block)
Newly laid concrete shall be covered by gunny bag, plastic,
tarpaulin etc. (Wooden centering will not be allowed)
Reinforced 36.33 BDF 17 Providing and fixing in position TMT - FE - 500 bar Bd.F.17, Page Metric 50660.00 7000.00
Cement reinforcement of various diameters for R.C.C. pile caps, No. 306 Tonne
Concrete footings, foundations, slabs, beams columns, canopies,
staircase, newels, chajjas, lintels pardis, copings, fins, arches
etc. as per detailed designs, drawings and schedules. including
cutting, bending, hooking the bars, binding with wires or tack
welding and supporting as required complete.
a) For TMT Fe 415 steel bars
( If Mild Steel/HYSD steel is to be used prior permission from
S.E. should be taken )
Reinforced 36.34 BDF 17 Providing and fixing in position Mild steel reinforcement of Bd.F.17, Page Metric NA NA
Cement various diameters for R.C.C. pile caps, footings, foundations, No. 306 Tonne
Concrete slabs, beams and columns, canopies, staircases, newels, chajjas,
lintels, pardies, coping, fins, arches etc. as per detailed design
and drawings and schedules including cutting, bending,
hooking the bars, binding with wires or tack welding and
supporting as required completed.
Reinforced 36.35 BDF 17 Providing and fixing in position TMT / HYSD steel bars Bd.F.17, Page Metric 50660.00 7000.00
Cement reinforcement of various diameters for R.C.C. pile caps, No. 306 Tonne
Concrete footings, foundations, slabs, beams and columns, canopies,
staircases, newels, chajjas, lintels, pardies, coping, fins, arches
etc. as per detailed design and drawings and schedules
including cutting, bending, hooking the bars, binding with
wires or tack welding and supporting as required completed.
Reinforced 36.36 0 Providing and applying Anti corrosive treatment to Mild steel, (As directed by Square NA NA
Cement Tor steel bar reinforcement as per cement polymer composite Engineer in Meter
Concrete coating (C.P.C.C.) method developed by C.E.C.R.I. including Charge)
cleaning the bar by means of any established mechanical or
manual method for removing rust and deleterious material,
applying rapid setting primer and cement polymer sealing coat
of approved and licensed by CECRI including redoing the
process if damage occurs during handling, stacking etc.
complete. (With prior approval of SEMC) Item shall be used
for old structures.
per unit) unit)
Reinforced 36.37 MORT & H Providing Fusion Bonded Epoxy Coating (FBEC) to reinforced 0 Metric NA NA
Cement 1600 Edition bars of 8mm diameter as per IS: 13620-1993 specifications for Tonne
Concrete 2001. a thickness of 175micron Permissible variation of 50 micron
including testing of coating at plant extra cost for careful
handling using PVC coating, binding wires instead of G. I.
wires to and from Plant) touching up the material supplied
repair work etc complete as per detailed specifications. (Lead
200km from plant) etc complete. (Item shall be used for new
structures.)
Note : The item should be executed with prior approval of
Superintending Engineer.
FREQUENCY OF TEST OF FUSION BONDED EPOXY
COAT
a) Coating thickness shall be tested at a frequency of not less
than one full length bar every twenty bars for each size
b) continuity of coating shall be determined by testing one full
length bar in every twenty bars for each size
c) Coating thickness over the whole of the coated bar section
shall be determined by sectioning and examining one bar in
every twenty tonnes for each size.
d) For testing adhesion of coating, samples shall be selected
from each size according to the frequency given below:
Nominal Size of Bar, MM No. of Samples
For all types of bar Minimum 1 for
every diameter or
as directed by
engineer in charge
Cement 1600 Edition bars of 10mm diameter as per IS: 13620-1993 specifications Tonne
Concrete 2001. for a thickness of 175micron Permissible variation of 50
micron including testing of coating at plant extra cost for
careful handling using PVC coating, binding wires instead of
G. I. wires to and from Plant) touching up the material supplied
structures.)
COAT
every diameter or
as directed by
engineer in charge
per unit) unit)
structures.)
COAT
every diameter or
as directed by
engineer in charge
structures.)
COAT
every diameter or
as directed by
engineer in charge
per unit) unit)
structures.)
COAT
every diameter or
as directed by
engineer in charge
structures.)
COAT
every diameter or
as directed by
engineer in charge
per unit) unit)
structures.)
COAT
every diameter or
as directed by
engineer in charge
structures.)
COAT
every diameter or
as directed by
engineer in charge
Reinforced 36.45 BDF 19 Item of red book is to be taken 0 0 NA NA

Cement
Concrete
Reinforced 36.46 BDF 20 Providing and fixing in position after hoisting, precast 1:2 Bd. F. 20 Page Square NA NA
Cement cement mortar reinforced jali 50 mm thick with 3 mm diameter No. 307 Meter
Concrete mild steel bar reinforcement, of approved design on both side,
fixing in cement mortar 1:3 and curing complete.
Reinforced 36.47 BDF 20 Providing and fixing in position after hoisting, precast 1:2 Bd. F. 20 Page Square 540.00 83.00
Cement cement mortar reinforced jali 80 mm thick with 3 mm diameter No. 308 Meter
Concrete mild steel bar reinforcement, of approved design on both sides,
fixing in cement mortar 1:3 and curing complete.
per unit) unit)
Reinforced 36.48 BDF 41 Providing and casting in situ c.c. M-20 of trap metal for RCC Bd.F.6, Page Cubic 8120.00 1505.00
Cement rectangular grid beam with slab as per detailed design and No.300 / Meter
Concrete drawing or as directed including dewatering if necessary, Bd.F.8, Page
centering, formwork, cover blocks compacting , curing , No.302 and
finishing & roughening them to form surface with C.M. 1:3 of B.7 Page No.
sufficient minimum thickness to give smooth and even surface 38.
or roughening them if special finish is to be provided and
curing complete (Excluding reinforcement and structural steel).
With fully automatic micro processor based PLC with SCADA
Reinforced 36.49 BDF 41 Providing and casting in situ c.c. M-20 of trap metal for RCC As directed by Cubic 8835.00 1505.00
Cement rectangular grid beam with slab as per detailed design and Engineer in Meter
Concrete drawing or as directed including dewatering if necessary, charge.
finishing & roughening them to form surface with C.M. 1:3 of
sufficient minimum thickness to give smooth and even surface
curing complete(Excluding reinforcement and structural
Crushed sand.
Reinforced 36.51 BDF 41 Providing and casting in situ c.c. M-25 of trap metal for RCC As directed by Cubic 9350.00 1505.00
Cement rectangular grid beam with slab as per detailed design and Engineer in Meter
Concrete drawing or as directed including dewatering if necessary, charge.
enabled reversible drum type concrete mixer With Crushed
sand.
curing complete (Excluding reinforcement and structural
natural sand.
centering, formwork, cover blocks compacting, finishing the No.302 and
form surface with C.M. 1:3 of sufficient minimum thickness to B.7 Page No.
give smooth and even surface or roughening them if special 38.
finish is to be provided and curing complete (Excluding
type concrete mixer With Crushed sand.
per unit) unit)
centering, formwork, ?cover blocks compacting, finishing the No.302 and
type concrete mixer With natural sand.
Crushed sand
centering, formwork, cover blocks compacting, finishing the No.302 and
type concrete mixer ?With natural sand.
Crushed sand.
with fully automatic micro processor based PLC with SCADA
sand.
Crushed sand.
per unit) unit)
reinforcement and structural steel). with fully automatic micro
plant (pan mixer)... With natural sand.
plant (pan mixer)?With Crushed sand.
centering, formwork, cover blockscompacting , curing , No.302 and
enabled concrete batch mix plant (pan mixer)... With Natural
sand.
Reinforced 36.63 BDF Providing and casting in situ c.c. M-30 of trap metal for RCC Bd.F.6, Page Cubic 9985.00 1505.00
plant (pan mixer)... With Crushed sand.
Reinforced 36.64 BDF Providing and casting in situ c.c. M-35 of trap metal for RCC Bd.E.2 Page Cubic 10685.00 1505.00
Cement rectangular grid beam with slab as per detailed design and No. 288 and Meter
Concrete drawing or as directed including dewatering if necessary, B.7 Page No
centering, formwork, cover blocks compacting, finishing the 38
form surface with C.M. 1:3 of sufficient minimum thickness to
give smooth and even surface or roughening them if special
Reinforced 36.65 BDF Providing and casting in situ c.c. M-35 of trap metal for RCC Bd.E.2 Page Cubic 10580.00 1505.00
Cement rectangular grid beam with slab as per detailed design and No. 288 and Meter
Concrete drawing or as directed including dewatering if necessary, B.7 Page No
centering, formwork, cover blocks compacting , curing , 38
enabled concrete batch mix plant (pan mixer)... With Crushed
sand.
per unit) unit)
Reinforced 36.66 BDF 41 Providing and casting in situ c.c. M-40 of trap metal for RCC Bd.E.4 Page Cubic 10740.00 1505.00
Cement rectangular grid beam with slab as per detailed design and No. 289 and B- Meter
Concrete drawing or as directed including dewatering if necessary, 7, Page No.38
centering, formwork, ?cover blocks compacting, finishing the
form surface with C.M. 1:3 of sufficient minimum thickness to
give smooth and even surface or roughening them if special
Reinforced 36.67 BDF 41 Providing and casting in situ c.c. M-40 of trap metal for RCC Bd.E.4 Page Cubic 10635.00 1505.00
Cement rectangular grid beam with slab as per detailed design and No. 289 and B- Meter
Concrete drawing or as directed including dewatering if necessary, 7, Page No.38
enabled concrete batch mix plant (pan mixer)...With Crushed
sand.
Reinforced 36.68 BDF Providing and fixing during laying in RCC Slab rectangular 2 As directed by Number 236.00 15.00
Cement mm thick M.S. sheet fan hook box of size 180x100 mm with Engineer in
Concrete required depth with holes or notches as required, bottom and charge
top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round
headed screws together with 12 mm dia. M.S. bar bent to shape
with hooked ends for fan hook and painting to exposed surface
Reinforced 36.69 BDF 3a,b Providing and laying in situ cement concrete M - 25 Ready mix Bd. F 3 page Cubic 5895.00 851.00
Cement of trap /granite /quartzite /gneiss metal, Natural Sand for No. 298 and B- Meter
Concrete R.C.C.work in foundations like raft, strip, foundations, grillage 7, Page No. 38
and footings of R.C.C. columns and steel stanchions etc.
including bailing out water, formwork, cover blocks,
compacting , curing , finishing & roughening the surface if
special finish is to be provided ( Excluding reinforcement &
structural steel ) complete With Natural Sand ---( Item to be
used with prior permission of Superintending Engineer )
Reinforced 36.70 0 Providing and casting in situ Ready Mix Cement M-15 of trap / As directed by Cubic NA NA
Cement granite / quartzite /gneiss metal, for R.C.C. work for Engineer in Meter
Concrete Building,Bridges or other works as per drawing or as directed, charge
including, centering, formwork, compacting, covering newly
laid concrete by gunny bags, plastic or tarpaulin, finishing the
surface or roughening if special finish is to be provided, curing
etc. complete.With pressure pump.
etc. complete.without pressure pump.
etc. complete.With pressure pump.
etc. complete. Without pressure pump.
per unit) unit)
etc. complete. With pressure pump.
Reinforced 36.76 0 Providing and casting in situ Ready Mix Cement M30 of trap / As directed by Cubic NA NA
etc. complete. With pressure pump.
Reinforced 36.78 BDF 3a,b Providing and laying in situ cement concrete M - 25 Ready mix Bd. F 3 page Cubic NA NA
Cement of trap /granite /quartzite /gneiss metal, Crushed Sand for No. 298 and B- Meter
compaction, curing, finishing and roughening the surface if
structural steel ) complete.With Crushed Sand ---( Item to be
compaction,curing, finishing and roughening the surface if
structural steel ) complete. With Natural Sand ---( Item to be
structural steel ) complete With Crushed Sand ---( Item to be
per unit) unit)
structural steel ) complete ?With Natural Sand ---( Item to be
structural steel ) complete ?With Crushed Sand ---( Item to be
Reinforced 36.84 BDF 3a,b Providing and laying in situ cement concrete M - 40 Ready Bd. F 3 page Cubic NA NA
Cement mixof trap /granite /quartzite /gneiss metal, Crushed Sand for No. 298 and B- Meter
and footings of R.C.C. columns and steel stanchions
etc.including bailing out water, formwork, cover blocks,
structural steel ) complete. With Crushed Sand ---( Item to be
Reinforced 36.85 BDF 5 Providing and laying in situ cement concrete M - 25 Ready mix Bd. F 5 page Cubic NA NA
Concrete R.C.C.columns as per detailed designs & drawing or as 7, Page No. 38
directed including centering, formwork, cover blocks,
directed including centering, formwork, cover
blocks,compaction, curing, finishing and roughening the
surface if special finish is to be provided ( Excluding
reinforcement & structural steel ) complete With Crushed Sand -
--( Item to be used with prior permission of Superintending
Engineer )
per unit) unit)
Reinforced 36.90 BDF 5 Providing and laying in situ cement concreteM - 35 Ready mix Bd. F 5 page Cubic NA NA
Concrete R.C.C. beams and lintels as per detailed designs & drawing or 7, Page No. 38
as directed including centering, formwork, cover blocks,
Concrete R.C.C.beams and lintels as per detailed designs & drawing or 7, Page No. 38
per unit) unit)
Reinforced 36.96 BDF 6 Providing and laying in situ cement concreteM - 30 Ready mix Bd. F 6 page Cubic NA NA
structural steel ) complete With Crushed Sand---( Item to be
Cement of trap /granite /quartzite /gneiss metal, Natural Sand for No.302 and B- Meter
Concrete R.C.C. Slabs and Landings as per detailed designs & drawing 7, Page No. 38
or as directed including centering, formwork, cover blocks,
Cement of trap /granite /quartzite /gneiss metal, Crushed Sand for No.302 and B- Meter
structural steel ) complete . With Crushed Sand ---( Item to be
structural steel ) complete.With Natural Sand ---( Item to be
per unit) unit)
Cement ?of trap /granite /quartzite /gneiss metal, Crushed Sand for No.302 and B- Meter
Concrete R.C.C. Rectangular grid beam with slab as per detailed designs 7, Page No. 38
& drawing or as directed including centering, formwork, cover and Bd. F 8
blocks, compaction, curing, finishing and roughening the Page No. 302
reinforcement & structural steel ) complete. With Natural Sand -
Engineer )
reinforcement & structural steel ) complete. With Crushed Sand
---( Item to be used with prior permission of Superintending
Engineer )
reinforcement & structural steel ) complete. ?With Natural
Sand ---( Item to be used with prior permission of
Superintending Engineer )
per unit) unit)
blocks, compaction, curing and roughening the surface if Page No. 302
structural steel ) complete. With Crushed Sand---( Item to be
blocks, compaction, curing, finishingand roughening the Page No. 302
Engineer )
Engineer )
Engineer )
Engineer )
Report Name: e DSR
per unit) unit)
Brick 37.01 BDG 1 Providing second class Burnt Brick masonry with conventional/ Bd.G. 1 Page Cubic 4930.00 886.00
Masonry I.S. type bricks in cement mortar 1:6 in foundations and plinth of No. 313 Meter
inner walls/ in plinth external walls including bailing out water
manually , striking joints on unexposed faces, raking out joints
on exposed faces and watering etc. Complete.
Brick 37.02 BDG 2 Providing first class Burnt Brick masonry with conventional/ Bd.G.2 Page Cubic 5130.00 886.00
Masonry I.S. type bricks in cement mortar 1:6 in plinth including bailing No. 313 Meter
out water manually, striking joints on unexposed faces, pointing
with cement mortar 1:3 on exposed face and watering etc.
Complete.
Brick 37.03 BDG 3 Providing second class Burnt Brick masonry with conventional/ Bd.G.3 Page Cubic 4800.00 750.00
Masonry I.S. type bricks in cement mortar 1:6 in plinth as backing in No. 314 Meter
composite masonry including bailing out water manually,
striking joints, raking out joints and watering etc Complete.
Brick 37.04 BDG 4 Providing First class Burnt Brick masonry with conventional/ 0 0 NA NA
Masonry I.S. type bricks in cement mortar 1:6 in superstructure including
striking joints, raking out joints, watering and scaffolding etc.
Complete
Brick 37.05 BDG 5 Providing second class Burnt Brick masonry with conventional/ Bd.G.5 Page Cubic 4950.00 886.00
Masonry I.S. type bricks in cement mortar 1:6 in superstructure including No. 315 Meter
striking joints, raking out joints, watering and scaffolding etc.
Complete
Brick 37.06 BDG 7 Providing second class Burnt Brick masonry with conventional/ Bd.G.7 Page Square 660.00 110.00
Masonry I.S. type bricks in cement mortar 1:4 in half brick thick wall No. 316 Meter
including mild steel longitudinal reinforcement of 2 bars of 6
mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at
every third course, properly bent and bonded at ends
scaffolding, racking out joints and watering etc. complete.
Brick 37.07 BDG 8 Providing Burnt Brick-on-edge masonry with second class Bd.G.8 Page Square 625.00 110.00
Masonry bricks of conventional type bricks in cement mortar 1:3 No. 317 Meter
including mild steel longitudinal reinforcement of 2 bars of 6mm
diameter / one strips of hoop iron 25 mm X 1.6 mm placed at
every third course, properly bent and bonded at ends,
scaffolding, raking out joints and watering etc .complete.
Brick 37.08 BDG 9 Providing first class Burnt Brick masonry with conventional / Bd.G.9 (a) Cubic 5400.00 1450.00
Masonry I.S. type bricks in cement mortar 1:4 including scaffolding, Page No. 317 Meter
racking out joints pointing in C.M. 1:3 and watering in pillars of
rectangular or square shape as shown on the drawing or as
directed etc.complete.
Brick 37.09 BDG 9 Providing first class Brick masonry with conventional / IS. type Bd.G.9 (b) Cubic 5500.00 1450.00
Masonry bricks in cement mortar 1:4 including scaffolding, racking out Page No. 317 Meter
joints pointing in C.M 1:3 and watering etc. in pillars of curved
shapes, as shown on the drawing or as directed etc. complete.
Brick 37.01 BDG 10 Providing second class Burnt Brick masonry with conventional / Bd.G.10 (a) Cubic 5000.00 1050.00
racking out joints and watering etc. in pillar of rectangular
shapes as shown in the drawings or as directed complete.
Brick 37.11 BDG 10 Providing second class Burnt Brick masonry with conventional / Bd.G.10 (b) Cubic 5200.00 1050.00
racking out joints and watering etc.in pillar of curved shapes as
shown in the drawing or as directed complete.
Brick 37.12 BDG Providing fly ash brick masonry with conventional / I.S. type fly As director by Cubic 4680.00 900.00
Masonry ash bricks in C.M. 1:6 in foundation and plinth including engineer Meter
bailing out water manually striking joints, racking out joints incharge and
watering and scaffolding etc. complete. BDG- 2 & 5
per unit) unit)
Brick 37.13 BDG Providing fly ash brick masonry with conventional/ I.S. type As director by Cubic 4700.00 900.00
Masonry bricks in cement mortar 1:6 in superstructure including striking engineer Meter
joints, raking out joints, watering and scaffolding etc. Complete incharge and
BDG- 2 & 5
Brick 37.14 BDG Providing Second class fly ash brick masonry with conventional Bd. G. 7 Page Square 675.00 110.00
Masonry / I.S. type bricks in cement mortar 1:4 in half brick thick wall 316 Meter
including mild steel longitudinal reinforcement of two bars of 6
mm diameter / two hoop iron strips 25 mm x 1.60 mm at every
third course, properly bent and bounded at ends scaffolding
raking out joints and watering etc. complete.
Brick 37.15 BDG Providing Autoclaved Aerated Concrete Block masonary of As directed by Cubic 7050.00 960.00
Masonry Ecolite or equivalent make conforming to IS:2185 (Part 3) - engineer in Meter
1984 in extra fine jointing mortar of fixoblock of UltraTech or charge
equivalent in superstructure including striking joints, raking out
joints and scaffolding etc. Complete. (The test shall be carried
out conforming to IS:6441 (Part I) - 1972)
Brick 37.16 BDG Providing Autoclaved Aerated Concrete Block masonary of As directed by Square 820.00 115.00
Masonry Ecolite or equivalent make conforming to IS:2185 (Part 3) - engineer in Meter
1984 in extra fine jointing mortar of fixoblock of UltraTech or charge
equivalent in Half brick thick wall including striking joints,
raking out joints and scaffolding etc. Complete. (The test shall
be carried out conforming to IS:6441 (Part I) - 1972)
Report Name: e DSR
per unit) unit)
Stone 38.01 BDH 1 Providing uncoursed rubble masonry of trap / granite / quartzite Bd.H.1 Page Cubic 2850.00 1058.00
Masonry / gneiss stones in cement mortar 1:6 in foundation and plinth of No. 329 Meter
inner walls / in plinth of external walls including bailing out
water manually , striking joints on un exposed faces and
watering etc.complete.
Masonry / gneiss stones in cement mortar 1:5 in basements including No. 329 Meter
scaffolding, bailing out water manually, racking out joints when
plastering is to be done striking joints where no pointing or
plastering is to be done and watering etc.complete.
Masonry / gneiss stone in cement mortar 1:3 in basement with patent No. 331 Meter
water proofing compound added to it at rate of 1 kg per bag of
cement including bailing out water manually, scaffolding
racking out joints when plastering is to be done and watering
etc. complete.
Masonry / gneiss stones in cement mortar 1:6 in superstructure including No. 331 Meter
racking out joints when plastering is to be done / striking joints
when no plastering is to be done on inside watering and
scaffolding etc.complete.
Stone 38.05 BDH 5 Providing random rubble masonry second sort of trap / granite / Bd.H.5 Page Cubic 3150.00 1600.00
Masonry quartzite / gneiss stones in cement mortar 1:6 in plinth including No. 331 Meter
bailing out water manually , striking joints on unexposed faces.
(Excluding pointing) etc.complete.
Stone 38.06 BDH 6 Providing random rubble masonry second sort of trap / granite / Bd.H.6 Page Cubic 3225.00 1650.00
Masonry quartzite / gneiss stones in cement mortar 1:6 in superstructure No. 332 Meter
racking out joints when plastering is to be done / striking joints
when no pointing or plastering is to be done on the inside
watering and scaffolding etc.complete.
Stone 38.07 BDH 7 Providing random rubble masonry first sort of trap / granite / Bd.H.7 Page Cubic 3170.00 1650.00
Masonry quartzite / gneiss stones in cement mortar 1:6 in external walls of No. 332 Meter
plinth including bailing out water manually , racking out joints
when pointing is to be done and striking joints from inside
including watering etc.complete.
Stone 38.08 BDH 8 Providing random rubble masonry first sort of trap /granite / Bd.H.8 Page Cubic 3450.00 1700.00
including bailing out water manually ,raking out joints from
outside and striking joints when no pointing or plastering is to
be done from inside watering and scaffolding etc.complete.
Stone 38.09 BDH 11 Providing coursed rubble masonry second sort of trap / granite / Bd. H.11 Page Cubic 6500.00 1650.00
Masonry quartzite / gneiss stones in cement mortar 1:6 in external walls of No. 333 Meter
plinth including bailing out water manually , striking joints
inside and raking out joints from outside and watering
etc.complete
Stone 38.01 BDH 12 Providing coursed rubble masonry second sort of trap / granite / Bd.H.12 Page Cubic 6700.00 1700.00
including raking out joints when plastering is to be done and
striking joints when no plastering is to be done on the inside,
watering scaffolding etc.complete.
Stone 38.11 BDH 13 Providing coursed rubble masonry first sort of trap / granite / Bd.H.13 Page Cubic 6600.00 1650.00
Masonry quartzite / gneiss stones in cement mortar 1:6 in external work of No. 333 Meter
plinth including bailing out water manually, striking joints inside
and watering etc.complete.
Stone 38.12 BDH 14 Providing coursed rubble masonry first sort of trap / granite / Bd.H.14 Page Cubic 7100.00 2130.00
including racking out joints on the inside when plastering is to
be done, watering and scaffolding etc. complete.
per unit) unit)
Stone 38.13 BDH 40 Providing coursed rubble masonry first sort for pillars of trap / Bd.H.40 Page Cubic 6995.00 2200.00
Masonry granite / quartzite / gneiss stones in cement mortar 1:6 including No. 345 Meter
pointing with cement mortar 1:3 scaffolding and watering
etc.complete.
Stone 38.14 BDH 15 Providing coursed rubble masonry 2nd sort using all stones of Bd.H.15 Page Cubic NA NA
Masonry full height in each course of trap/ granite/quartzite/gneiss stones No.334. Meter
in cement mortar 1:6 in external walls of plinth including bailing
out water manually, striking joints and raking out joints and
watering.
Report Name: e DSR
per unit) unit)
Concrete 39.01 BDI 1 Providing and laying masonry of I.S. Standard C.C. hollow Bd.I.1 Page Square 540.00 310.00
Block block 100 x 200 x 400 mm with 100mm thick in cement mortar No. 349 Meter
Masonry 1:6 proportion for superstructure including curing, scaffolding
etc. complete.
Concrete 39.02 BDI 1 Providing and laying masonry of I.S. Standard C.C. hollow Bd.I.1 Page Square 460.00 152.00
Block block 200 x 200 x 400 with 200mm thick mm in cement mortar No. 349 Meter
Masonry 1:6 proportion for superstructure including curing, scaffolding
etc. complete.
Concrete 39.03 BDI Providing and constructing masonry in precast solid Concrete As directed by Cubic 3950.00 523.00
Block Block (Grade D-50 As per I.S. 2185, Part-I, 1974, Reframed Engineer in Meter
Masonry 1987) having compressive strength 5-00 N/mm2) of size (300 Charge.
mm x 200 mm x 150mm) in cement mortar 1:6 for
superstructure including striking joints on unexposed faces,
racking out joints on exposed faces, watering, curing and
scaffolding etc. complete.
Concrete 39.04 BDI Providing Autoclaved areated concrete block masonry of As directed by Cubic NA NA
Block approved manufacturer confirming to IS 2185 Part III 1984 of Engineer in Meter
Masonry size 600 mm x 200mm having thickness 100,150,200 or 250 Charge.
mm in cement mortar 1:6 in foundations and plinth of inner
walls / external walls including bailing out water, striking joints
on unexposed faces, racking out joints on exposed faces and
watering complete.
Concrete 39.05 BDI Providing Autoclaved areated concrete block masonry of As directed by Cubic NA NA
Block approved manufacturer confirming to IS 2185 Part III 1984 of Engineer in Meter
Masonry size 600 mm x 200mm having thickness 100,150,200 or 250 Charge.
mm in cement mortar 1:6 in super structure including striking
joints, racking out joints watering and scaffolding complete. (
Note - R.C.C. design shall be modified accordingly, where this
item is cosidered for masonary )
Concrete 39.06 BDI Providing Areated Autoclaved Cellular Blocks in Cement mortar As directed by Square NA NA
Block 1:6 using Fly Ash (AAC Blocks 75 X 250 X 625 mm size) with Engineer in Meter
Masonry cement mortar 1:6 (Billtech or any other approved make) 75 mm Charge.
thick wall masonary in superstructure or add on floors including
fitting, scaffolding and finishing etc complete as directed by
Engineer in charge
Block 1:6 using Fly Ash (AAC Blocks 100 X 250 X 625 mm size) Engineer in Meter
Masonry with cement mortar 1:6 (Billtech or any other approved make) Charge.
100 mm thick wall masonary in superstructure or add on floors
including fitting, scaffolding and finishing etc complete as
directed by Engineer in charge
per unit) unit)
Concrete 39.11 BDI Providing Green Build Product (GBP) Build Fast Plus masonry (As directed Square NA NA
Block ecofriendly wet mix /Blocks laying Adhesive is a pre- by Engineer in Meter
Masonry polymerized, wet mix jointing adhesive which is suitable for Charge)
Building masonry walls with all kind of blocks with thickness of
thin layer of 2mm to 4mm between masonry units. There is no
need to pre-wet the Blocks nor to post cure the wall with
water.Confirming to IS 2185 of size 75 x 240x 650 mm in
superstructure including striking joints, racking outjoints faces
and scaffolding etc. complete.
Concrete 39.12 BDI Providing Green Build Product (GBP) Build Fast Plus masonry As directed by Square NA NA
Block ecofriendly wet mix /Blocks of size 100 X 240 x 650 mm laying Engineer in Meter
Masonry Adhesive is a pre-polymerized, wet mix jointing adhesive which Charge.
is suitable for Building masonry walls with all kind of blocks
with thickness of thin layer of 2mm to 4mm between masonry
units. There is no need to pre-wet the Blocks nor to post cure
the wall with water.Confirming to S 2185 of size in
superstructure including striking joints, racking out joints faces
Concrete 39.13 BDI Providing Green Build Product (GBP) Build Fast Plus masonry As directed by Square NA NA
Block ecofriendly wet mix /Blocks of size 200 X 240 x 650 mm laying Engineer in Meter
Masonry Adhesive is a pre-polymerized, wet mix jointing adhesive which Charge.
is suitable for Building masonry walls with all kind of blocks
with thickness of thin layer of 2mm to 4mm between masonry
units. There is no need to pre-wet the Blocks nor to post cure
the wall with water.Confirming to S 2185 of size in
superstructure including striking joints, racking out joints faces
Report Name: e DSR
per unit) unit)
Expansion 40.01 BDK 1 Providing expansion joints in R.C.C. framed structure (interior Bd.K.1 Page Square 3090.00 525.00
Joint column) with plain premoulded filler 25 mm thick including No. 359 Meter
fixing T.W. battens on both faces and finishing as directed etc.
Complete.
Expansion 40.02 BDK 1 Providing expansion joints in R.C.C. framed structure (exterior Bd.K.1 Page Square 3385.00 210.00
Joint Columns) with plain premoulded filler 25 mm thick and 3 mm No. 359 Meter
thick alluminium plate, hold fast, fixing T.W. battens on internal
face, finishing etc. complete as directed.
Expansion 40.03 BDK 1 Providing expansion joints in R.C.C. framed structure (at floor Bd.K.1 Page Square 3825.00 385.00
Joint level) with premoulded filler 25 mm thick and 3 mm thick No. 359 Meter
aluminium plate as required, bitumen poured filler and fixing
T.W. battens on rear faces etc. complete as directed.
Expansion 40.04 BDK 1 Providing expansion joints in R.C.C. framed structure (at terrace Bd.K.1 Page Square 4509.00 580.00
Joint level) with premoulded filler 25 mm thick and 3 mm thick No. 359 Meter
aluminium plate as required, bituminous poured filler, fixing
lead, flashing on upper side and T.W. battens on inner face
finishing etc. Complete as directed.
Expansion 40.05 BDK 1A Providing expansion joints in reinforced cement concrete framed Bd K 1 A Square 4518.00 960.00
Joint structure (interior columns) with plain premoulded filler with Meter
confirming to IS 1838,1961, 25 mm thick with 40 mm wide and
1 mm thick stainless steel plate, hold fast, fixing T.W. battens on
internal face finishing etc. complete as directed
Expansion 40.06 BDK 1B Providing expansion joints in R.C.C. framed structure (exterior Bd.K.1 B Square 5015.00 960.00
Joint column) with plain premoulded filler 25 mm thick with 40 mm Meter
wide and 1 mm thick stainless steel plate, hold fast, fixing T.W.
battens on internal face and finishing etc. complete.
Expansion 40.07 BDK 1C Providing expansion joints in R.C.C. framed structure (at floor Bd.K.1 C Square 4495.00 900.00
Joint level) with plain premoulded filler 25 mm thick with 40 mm Meter
wide and 1 mm thick stainless steel plate, hold fast, fixing T.W.
battens on internal face and finishing etc. complete.
Expansion 40.08 BDK 1D Providing expansion joints in R.C.C. framed structure (at Bd.K.1 D Square 4575.00 900.00
Joint Terrace level) with premoulded filler 25 mm thick with 40 mm Meter
wide and 1 mm thick stainless steel plate as required, bitumen
poured filler and fixing T.W. battens on inner faces finishing
etc. complete as directed.
Expansion 40.09 BDK Providing and fixing of BITUFLEX CLOSE CELL FOAM of As directed by Running 1750.00 120.00
Joint size 30 mm x 30 mm in double layer in the expansion joints in Engineer in Meter
R.C.C framed structure (at floor level / at terrace level / interior charge
columns) for overlapping of closed cell foam joints, applying TP-
40 PRIMER on both the sides of concrete surface, filling the 25
mm x 25 mm gap with the POLYDEE-41 highly flexible sealant
and covering the joint with Polydee-LM, 150 mm width in 2
coats etc. complete.
Expansion 40.01 BDK Providing and fixing of BITUFLEX CLOSE CELL FOAM of As directed by Running 1575.00 120.00
Joint size 30 mm x 30 mm in double layer in the expansion joints in Engineer in Meter
R.C.C. framed structure (Exterior column) with closed cell foam charge
, applying TP-40 PRIMER on both the sides of concrete surface,
filling the 25 mm x 25 mm gap with the POLYSEAL, highly
flexible sealant and covering the joint with Polydee- LM, 150
mm width in 2 coats and fixing the aluminium plate of 100 mm
wide and 3 mm thick on external face of column etc.
complete.Note- for item no. 9 & 10 Prior approval of
Superintending Engineer is Necessary before execution of work.
Expansion 40.11 Providing and fixing bituminous pad 25mm thick for expansion As directed by Square NA NA
Joint joints in retaining wall, compound wall etc. complete. Engineer in Meter
charge
Report Name: e DSR
per unit) unit)
Water 41.01 BDJ 2 Providing and laying damp proof course 50 mm thick in M20 Bd.J.2 Page Square 275.00 50.00
Proofing cement concrete layer and bitumen / using cement with No. 355 Meter
waterproofing compound curing, formwork etc. complete.
Water 41.02 BDJ 3 Providing and applying Bitumen VG30/VG40 layer at 2 kg. per Bd.J.3 Page Square 130.00 19.00
Proofing square meter over the terrace, structural slab including cleaning No. 356 Meter
the surface for waterproofing as directed complete
Water 41.03 BDJ Providing leak proof treatment by Injection grouting method to As directed by Litre 21.00 12.00
Proofing old floor without removing tiles of W.C., bath, with cement sand Engineer in
proportion of 1:1.5 and waterproofing compound at 2 kg/bag of charge.
cement mixed in 35 liters of water including drilling holes in
required position grouting with above mixed solution and ceiling
etc. complete.
Water 41.04 BDJ Providing cement based water proofing treatment to terraces As directed by Square 575.00 125.00
Proofing (Indian water proofing or alike) with brick bats laid in required Engineer in Meter
slope to drain the water for any span after cleaning the base charge.
surface. Applying a coat of cement slurry admixed with
approved water proofing compound and laying the brick bats on
bottom layer in C.M.1:5 admixed with approved water proofing
compound filling up to half depth of brick bats, curing this layer
for 3 days, applying cement slurry over this layer joints of brick
bats with C.M.1:3 admixed with approved water proofing
compound and finally top finishing with average 20 mm. thick
layers of same mortar added with jute fiber at 1 Kg per bag
including finishing the surface smooth with cement slurry
admixed with approved water proofing compound. Marking
finished surface with false squares of 300mm x 300 mm.
making the junctions at the parapet rounded and tapered top for
required height, with drip mould at the junction of plaster and
parapet and curing and covering 10 years Guarantee against
leakproofness on Court fee stamp paper of Rs. 500/- including
ponding test etc. complete.
Water 41.05 BDJ Providing water proof bedding for flooring of Bath and WC 25 As directed by Square 310.00 80.00
Proofing mm thick in C.M. 1:3 including using approved water proofing Engineer in Meter
compound in charge.
specified proportion as per manufacturers specifications for per
bag of cement including leveling, curing and covering 10 years
guarantee on
court fee stamp paper of Rs.500/- including ponding test etc.
complete.
Water 41.06 BDJ Providing waterproof plaster in W.C. and bath 12 mm thick for As directed by Square NA NA
Proofing dado in cement mortar 1:3 with neat finishing, floating using Engineer in Meter
waterproofing compound at the rate of 1 kg. per bag of cement charge.
of approved make and manufacturer and curing etc. complete.
(Excluding Tiles)
(As directed by Engineer in Charge)
Water 41.07 BDJ Providing waterproof plaster in W.C. and bath 20 mm thick for As directed by Square NA NA
Proofing dado in cement mortar 1:3 with neat finishing, floating using Engineer in Meter
waterproofing compound at the rate of 1 kg. per bag of cement charge.
of approved make and manufacturer and curing (and filling
joints of Nahani trap and any outlet by properly) etc. complete.
Water 41.08 BDJ Removing the tar or coba and disposing of the material as As directed by Square NA NA
Proofing directed etc. complete. Engineer in Meter
charge.
per unit) unit)
Water 41.09 BDJ Providing and applying water proofing treatment using acrylic As directed by Square NA NA
Proofing polymer modified cement based water proofing coating with Engineer in Meter
fibre glass mesh mixing at the rate of powder to liquid (2:1) by charge
weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or
alike of chemicals for masonry and concrete surface by brush
covering 7 years guarantee on Stamp Papers etc. complete.
Water 41.01 BDJ Providing and laying jointless Polydee-LM, a highly flexible As directed by Square NA NA
Proofing elastometric coating for RCC / cementitious surface for terrace Engineer in Meter
waterproofing on B.B. Coba / R.C.C, after application of TP-42 charge
Primer on perfectly clean surface (free from loose dust and
foreign matter) application of 1st coat of Polydee-LM @ 700
gms/sqm and applying 2nd coat of Polydee-LM @ 700 gms/sqm
and finishing the same with sprinkling the AG-10 granules on
the wet coating. (After finishing covering the treatment with
25mm cement plaster for protection with fibrillated 6mm
Plyplast fibre @ 125 gms/sqm to be paid in separate item.)
covering 7 years guarantee on Court Fee Stamp Paper of Rs.
100/- etc. complete.
Water 41.11 BDJ Providing and applying a base coat comprising of 1 Kg Polydee- As directed by Square NA NA
Proofing MC and 1 Kg fresh cement after wetting the surface followed by Engineer in Meter
drying the surface for 2 days, apply primer coat of TP-40 and charge
after drying, applying Polydee-11 two component (mixing ratio
2 A : 1 B) ) Antibacterial food grade coating inside drinking
water tank in two coats with time interval of minimum 8 hrs.
covering 7 years guarantee on Court Fee Stamp Paper of Rs.
100/- etc. complete.
Water 41.12 BDJ Providing and fixing 20 to 25 mm thick rough shahabad box Bd.J.2 Page Square 797.00 160.00
Proofing type waterproofing for basement or underground floor on a base No. 355 Meter
of Cement concrete 1:3:6, including sub base of 2.50 centimeter
thick Cement mortar 1:3 with conceal, secrete (RMW), Algae
proof or other alike waterproofing liquids, raking of joints upto
35 mm depth, filling the joints with 6 mm size crushed metal,
hand grouting with cement slurry, curing and cleaning, with 7
years guarantee on court fee stamp of Rs. 100/- with ponding
test etc complete. (excluding Cement concrete 1:3:6 base
concrete )
Water 41.13 BDJ Providing and fixing 20 to 25 mm thick rough shahabad box Bd.J.2 Page Square 718.00 151.00
Proofing type waterproofing treatment to vertical outside faces of No. 355 Meter
Reinforced Cement concrete walls of basement or underground
floor including filling the gap of 25 mm between rough
shahabad and R.C.C. walls with cement grout mixed with water
proofing liquid Algae proof or other alike with one tile lift
method, brushing the joints horizontally with cement slurry
mixed with water proofing liquid for width 30 to 35 mm and
sloping coping over topmost tile with cement mortar 1:3, butting
the bottom most with Cement concrete 1:2:4 mixed with water
proofing liquid, curing, with 7 years guarantee on court fee
stamp of Rs.100/- with ponding test etc complete. (excluding
Cement concrete 1:3:6 base concrete )
Water 41.14 BDJ Providing and laying perforated PVC 160 mm dia pipe in proper As directed by Running 835.00 255.00
Proofing line,level& slope including necessary material fitting etc. Engineer in Meter
complete. charge
Water 41.15 BDJ Providing and applying required coats of a water based UV As directed by Square 295.00 58.00
Proofing resistant Evercrete Top Seal sealant to protect natural stone, Engineer in Meter
bricks, concrete and wooden structures from water intrusion and charge.
staining due to water penetration and algue formation etc
complete
per unit) unit)
Water 41.16 BDJ Providing and applying required coats of a water based As directed by Square 485.00 63.00
Proofing Evercrete Deep Penetrating Sealer (DPS) on cement concrete Engineer in Meter
surface like roads, beams, and columns, plastered walls, charge.
basements, roofs, potable water tanks etc to react with cement
and to penetrate concrete structure thereby making it resistant to
chemicals / chlorides water to make it dust proof and to act as a
water resistant at the same time which Strengthens the treated
surface and reduce the curing period etc complete. - Note -- for
item no. 7 to 4 prior approval of Superintending Engineer will be
necessary
Water 41.17 Providing and laying 3 course water proofing treatment on As directed by Square NA NA
Proofing terrace slab with tar felt as per I.S.I. code of practice. Engineer in Meter
charge
Water 41.18 Providing and admixing bipolar, migratory, integral, concrete As directed by Cum. NA NA
Proofing penetrating corrosion inhibiting admixture POLYALK CP 293 ? Engineer in
Sunanda make or equivalent at a dose of 3 Kg per cum of charge.
concrete. Inhibitor should be non-nitrite based and have the
ability to provide corrosion protection to both anodic and
cathodic sites on the steel surface. Inhibitor should form
polydentate complexes with the steel surface to promote proper
film formation. Inhibitor must not have any adverse effect on
concrete compressive strength. This may be established through
laboratory test results from independent laboratory. Inhibitor
shall have test reports from accredited laboratory indicating
significant reduction in corrosion after accelerated corrosion test
based on JIS Z 1535. Further inhibitor must have undergone
long term performance tests as per ASTM G1 and ASTM G3
indicating rebar weight loss of less than 5 mpy for both tests.
Inhibitor should demonstrate a corrosion rate of zero columbs as
per ASTM G-109-2005 (For all types of RCC Works)
Water 41.19 Removing loose rust from the reinforcement bars by wire As directed by Square NA NA
Proofing brushing, light hammering etc. and applying sulphate and Engineer in Meter
chloride free inorganic single component rust remover charge.
(RUSTICIDE - SUNANDA MAKE or equivalent) conforming
to IS 9077. The rusted surface shall become blackish non rusted
colour. After 24 hours of application of rust remover, loose
particles shall be removed by brush. Applying bonding coat
slurry of high performance acrylic polymer (POLYALK EP @
0.25 kgs per sqm - SUNANDA MAKE or equivalent) . Mix 1
kg of Polyalk EP with 0.5Kg of cement and finish wet on wet
with ready to use repair polymer modified mortar (SUNMIX -
SUNANDA MAKE or equivalent). by adding 13- 16% water by
weight of SUNMIX for treatment to the damaged RCC
members.After mixing SUNMIX can be sprayed or trowel
applied. When applying by hand SUNMIX must be forced
tightly into the substrate to ensure complete contact with the
substrate.--Upto average 40mm thickness
per unit) unit)
Water 41.20 Removing loose rust from the reinforcement bars by wire As directed by Square NA NA
Proofing brushing, light hammering etc. and applying sulphate and Engineer in Meter
chloride free inorganic single component rust remover charge
(RUSTICIDE - SUNANDA MAKE or equivalent) conforming
to IS 9077. The rusted surface shall become blackish non rusted
colour. After 24 hours of application of rust remover, loose
particles shall be removed by brush. Applying bonding coat
slurry of high performance acrylic polymer (POLYALK EP @
0.25 kgs per sqm - SUNANDA MAKE or equivalent) . Mix 1
kg of Polyalk EP with 0.5Kg of cement and finish wet on wet
with ready to use repair polymer modified mortar (SUNMIX -
SUNANDA MAKE or equivalent). by adding 13- 16% water by
weight of SUNMIX for treatment to the damaged RCC
members.After mixing SUNMIX can be sprayed or trowel
applied. When applying by hand SUNMIX must be forced
tightly into the substrate to ensure complete contact with the
substrate. Upto average 20mm thickness
Water 41.21 Providing and installing zinc based galvanic disk type anodes As directed by Square NA NA
Proofing (SUNANODE - SUNANDA MAKE or equivalent) to the Engineer in Meter
reinforcement at 1m c/c or as directed by EIC. The anode shall charge.
be connected to the reinforcement steel by connectors provided
with the anode. Sunanodes should pass 500 hours salt spray test
as per ASTM-B117
Water 41.22 Check the existing waterproofing treatment for ascertaining As directed by Square NA NA
Proofing damaged portion. Break open the damaged portion to expose the Engineer in Meter
bare slab and fill the same with screed in proportion 1:2:4 with charge.
10 mm down aggregates and adding shrinkage compensating
admixture (SUNPLEX - SUNANDA MAKE or equivalent) and
finish it properly to match with the surface around the patch.
Open and fill the cracks with Flexiroof PU. Clean the entire
surface thoroughly and over this prepared surface, apply primer
+ two coats of single component elastomeric waterproof coating
(SUNKOTE @ 1.2 kgs per sqm - SUNANDA MAKE or
equivalent). SUNKOTE shall conform to Flexibility and
adhesion as per IS 101 and DIN 1048 for water impermeability.
Over this waterproofing treatment, provide average 40 mm thick
IPS as a protecting layer and finish it properly. When IPS is still
wet lines shall be marked to get 300 X 300 mm pattern, to avoid
shrinkage cracks. (For flat roof only)
Water 41.23 Check the existing waterproofing treatment for ascertaining As directed by Square NA NA
Proofing damaged portion. Break open the damaged portion to expose the Engineer in Meter
bare slab and fill the same with screed in proportion 1:2:4 with charge
10 mm down aggregates and adding shrinkage compensating
admixture (SUNPLEX - SUNANDA MAKE or equivalent) and
finish it properly to match with the surface around the patch.
Open and fill the cracks with Flexiroof PU. Clean the entire
surface thoroughly and over this prepared surface, apply primer
+ two coats of single component elastomeric waterproof coating
(SUNKOTE @ 1.2 kgs per sqm - SUNANDA MAKE or
equivalent). SUNKOTE shall conform to Flexibility and
Over this waterproofing treatment, provide average 15 mm thick
plaster as a protecting layer and finish it properly. (For Sloping
roof only)
per unit) unit)
Water 41.24 Providing and applying a coat of anti fungal treatment As directed by Square NA NA
Proofing (SUNANTIFUNGAL SP - SUNANDA MAKE or equivalent) to Engineer in Meter
entire surface of wall. Applying one coat of polymeric water charge.
proofing coating (POLYALK WP @ 0.2 kgs per sqm -
SUNANDA MAKE or equivalent) having a breathable non toxic
acrylic polymer liquid and white cement mix in proportion 1:1
by weight with coat interval as 24 hours. Air curing shall be
done for 24 hours.Polyalk WP shall conform to Flexibility and
Before giving this treatment the entire surface of wall shall be
thoroughly clean to remove existing paint, dust, dirt, etc. The
cracks, if any, shall be filled with acrylic polymeric non shrink
crack filler putty ? POLYFILL AR, before giving waterproofing
treatment to the external surfaces. Applying Waterproof, anti
carbonation, anti fading, mould resistant, heat insulating, and
100% acrylic breathable decorative external coating (SUNEXT
8 @ 0.4 ltrs @ sqm - SUNANDA MAKE or equivalent) Mix 1
L of with 400ml of water, stir well and apply by brush for two
coats. Applying two coats at an interval of 4-6 hours between
each coat
Water 41.25 Providing and applying primer + two coats of 100% acrylic As directed by Square NA NA
Proofing breathable, waterproof, heat insulating, anti-carbonation Engineer in Meter
decorative external paint (SUNEXT 8 @ 0.6 ltrs per sqm- charge.
SUNANDA MAKE or equivalent. )Before giving this treatment
the entire surface of wall shall be thoroughly clean to remove
existing paint, dust, dirt, oil etc. The cracks, if any, shall be
filled with acrylic polymeric non shrink auto suction crack filler
putty (POLYFILL AR- SUNANDA MAKE or equivalent)
conforming to the specifications given in this tender document,
before giving painting treatment to the external surfaces.On such
prepared surface, apply primer+ two coats of 100% acrylic
breathable, waterproof, heat insulating, anti-carbonation
decorative external paint (SUNEXT 8 - SUNANDA MAKE
orequivalent). Acrylic paint shall conform to the following
properties.
1. Carbon dioxide diffusion equivalent air layer thickness (DIN
EN 1062-6) > 100 m
2. Carbon dioxide diffusion resistance co-efficient (DIN EN
1062-6) more than 105
3. Chloride Ion Diffusion(ASTM C 1202) = Zero Penetration
4. Adhesion (ASTM D 4541) > 2 N/mm2
5. Solar Reflectance Index (ASTM E 1980-11, EN 673:2011,
EN 410:2011) > 100
Report Name: e DSR
per unit) unit)
Plastering 42.01 BDL 1 Providing internal cement plaster 6 mm thick in a single coat in Bd.L.1 Page Square 74.00 35.00
and Pointing cement mortar 1:4 without neeru finish to concrete surface in all No. 367 Meter
positions including scaffolding and curing etc. complete.
Plastering 42.02 BDL 1 Providing internal cement plaster 6 mm thick in a single coat in Bd.L.1 Page Square 115.00 35.00
and Pointing cement mortar 1:3 without neeru finish to concrete surface in all No. 367 Meter
positions including scaffolding and curing etc. complete.
Plastering 42.03 BDL 2 Providing internal cement plaster 12mm thick in single coat in Bd. L.2 Page Square 110.00 48.00
and Pointing cement mortar 1:5 without neeru finish to concrete or brick No. 368 Meter
surfaces, in all positions including scaffolding and curing etc.
complete.
Plastering 42.04 BDL 2A Providing internal cement plaster 12mm thick in single coat in Bd. L.2 Page Square 130.00 53.00
complete.
Plastering 42.05 BDL 2B Providing internal cement plaster 12mm thick in single coat in Bd.L.2 Page Square 130.00 53.00
surfaces, in all position including scaffolding and curing etc.
complete.
Plastering 42.06 BDL 4 Providing internal cement plaster 20mm thick in two coats in Bd.L.4 Page Square 245.00 68.00
and Pointing cement mortar 1:5 without neeru finish, to concrete, brick No. 368 Meter
surface, in all positions including scaffolding and curing etc.
complete
Plastering 42.07 BDL 4A Providing internal cement plaster 20mm thick in two coats in Bd.L.4 Page Square 260.00 68.00
surface, in all positions including scaffolding and curing
etc.complete.
Plastering 42.08 BDL 4B Providing internal cement plaster 20mm. thick in two coats in Bd.L.4 Page Square 270.00 68.00
surface, in all positions including scaffolding and curing etc.
complete.
Plastering 42.09 BDL 5 Providing internal cement plaster 25mm thick in two coats in Bd.L.5 Page Square 310.00 71.00
and Pointing cement mortar 1:4 without neeru finish, to concrete, brick or No. 368 Meter
stone surfaces, in all positions including scaffolding and curing
etc.complete.
Plastering 42.01 BDL 3 Providing internal cement plaster 20mm thick in single coat in 0 Square NA NA
and Pointing cement mortar 1:3 without neeru finish to stone masonry Meter
complete.
Plastering 42.11 BDL 7 Providing sand faced plaster externally in cement mortar using Bd.L.7 Page Square 400.00 100.00
and Pointing approved screened sand, in all positions including base coat of No. 369 Meter
15 mm thick in cement mortar 1:4 using waterproofing
compound at 1 kg per cement bag curing the same for not less
than 2 days and keeping the surface of the base coat rough to
receive the sand faced treatment 6 to 8 mm thick in cement
mortar 1:4 finishing the surface by taking out grains and curing
for fourteen days scaffolding etc.complete.
Plastering 42.12 BDL 8 Providing rough cast cement plaster externally in two coats to Bd.L.8 Page Square 340.00 88.00
and Pointing concrete, brick or stone masonry surfaces in all positions with No. 370 Meter
base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast
treatment 12mm thick in proportion 1:1 1/2:3 including
scaffolding and fourteen days curing complete.
Plastering 42.13 BDL 9 Providing rough cast cement plaster externally in two coats with Bd.L.9, Page Square 350.00 114.00
and Pointing coloured cement finish to concrete/ brick/ stone masonry No.370 Meter
surfaces in all positions with base coat 12 to 15 mm. thick in
C.M. 1:4 using gray cement and rough cast treatment 12 mm
thick in proportion of 1:1 1/2:3 using colour pigment including
scaffolding and fourteen days curing etc. complete.
per unit) unit)
Plastering 42.14 BDL Providing and applying Texture plaster with finishing with Spec.No.: As Square 505.00 200.00
and Pointing Purlina/ Rustic texture material (with texture material of Asian/ directed by Meter
Renava/ Nitco/ Engineer- in-
Temtex or equivalant company make) in 3 to 4 milimeter charge.
thickness on previously finished plastered surface including
plaster Groove 6mm
thick or Tape Grooves 35 to 45 mm thickness or as required in
all postion including preparing the surface scaffolding etc.
complete. ( Excluding
texture Paint and Texture Paint Finishing) (Prior permission of
S.E. is required before inclusion of this item in the estimate)
Plastering 42.15 BDL 10 Providing neeru finish to plastered surfaces in all positions Bd. L.10, Page Square 25.00 12.00
and Pointing including scaffolding and curing etc. complete. No.370 Meter
Plastering 42.16 BDL 15A Providing flush grooved pointing with cement mortar 1:3 for Bd. L.15 Page Square 70.00 25.00
and Pointing brick work including scaffolding and curing etc. complete. No. 372 Meter
Plastering 42.17 BDL 15B Providing flush grooved pointing with cement mortar 1:3 for Bd. L.15 Page Square 90.00 28.00
and Pointing stone masonry work including scaffolding and curing etc. No. 372 Meter
complete.
Plastering 42.18 BDL 16 Providing tuck pointing with cement mortar 1:3 for stone/Brick Bd. L. 16 Page Square 120.00 33.00
and Pointing masonry including scaffolding and curing etc. complete. No. 373 Meter
Plastering 42.19 BDL 17 Providing weathered pointing with cement mortar 1:3 for stone/ Bd. L. 17 Page Square 120.00 36.00
and Pointing Brick masonary including scaffolding and curing etc. complete. No. 373 Meter
Plastering 42.20 BDL 18 Providing vee pointing with cement mortar 1:3 for stone / Brick Bd. L. 18 Page Square 80.00 30.00
and Pointing masonry including scaffolding and curing etc. complete No. 373 Meter
Plastering 42.21 BDL Providing fine cement finish 1.5 mm thick over green plaster As directed by Square 55.00 18.00
and Pointing surface including scaffolding curing etc. complete. Engineer in Meter
charge.
Plastering 42.22 BDL Labour charges for providing groove in external plaster having As directed by Running 25.00 20.00
and Pointing width and spaced as directed by engineer incharge etc. complete. Engineer in Meter
charge.
Plastering 42.23 BDL Providing patti/ band 75mm wide on plastered surface 12 mm to As directed by Running 20.00 15.00
and Pointing 15 mm thick in C.M. 1:3 line and level including neat finishing Engineer in Meter
scaffolding curing etc. complete. charge.
Plastering 42.24 BDL Providing patti/ band 100mm wide on plastered surface 12 mm As directed by Running 25.00 19.00
and Pointing to 15 mm thick in C.M. 1:3 line and level including neat Engineer in Meter
finishing scaffolding curing etc. complete. charge.
Plastering 42.25 BDL Providing patti/ band 150mm wide on plastered surface 12 mm As directed by Running 40.00 19.00
and Pointing to 15 mm thick in C.M. 1:3 line and level including neat Engineer in Meter
finishing scaffolding curing etc. complete. charge.
Plastering 42.26 BDL Providing and fixing chicken mesh of 22 gauge, with about 30 As directed by Square 90.00 27.00
and Pointing cm. width at the junction of R.C.C members and brick work, of Engineer in Meter
approved quality including fixing mesh in position by necessary Charge:
drilling in concrete /B.B.masonry and or tying by binding wire
etc. complete.
Plastering 42.27 BDL Providing and applying plaster with plaster of paris in 6mm As directed by Square 85.00 41.00
and Pointing thickness to previously plaster surface in all position including Engineer in Meter
preparing the surface scaffolding etc. complete. Charge.
Plastering 42.28 BDL Providing and applying spray plaster made with finely graded As directed by Square 175.00 33.00
and Pointing marble and quartz in 2 mm thickness in two coats using putty Engineer in Meter
knife or trowel to newly plaster fairly even surface after Charge.
minimum 30 days gap in all position including finishing the
surface using zero number sand paper or fine emry paper gently
level the area by moving paper in round circles removing the
dust and clean the surface with dry cloth and scaffolding
including all materials and labour etc. complete.
per unit) unit)
Plastering 42.29 BDL Providing and applying laying Aggregate plaster in granite / As directed by Square 850.00 370.00
and Pointing marble stones, as decorative finish to give granite / marble like Engineer in Meter
appearance to concrete, brick or block surfaces in all position Charge.
including preparation of surface smoothly, evenly by racking of
joints in case of Brick or block work including backing layer of
12 mm thick with cement mortar 1:3 with 2% integral cement
water proofing compound, roughening for wall keying hardening
and drying the surface for a minimum five days gaps including
second coat of cement lime mortar into a proportion 1:4
preparing the surface for three coat of marble finish plaster
giving a thin coat of white cement and two parts of course
calcite powder, applying the mortar with steel float on the
surface in proper evenness applying at coat of white cement and
lime to set a smooth finish then applying a thin coat of slurry
made of white cement and black oxide colour in required
proportion by the steel float to get black streaks on the surface
and curing the surface for two days including all materials and
labour etc. complete.
Plastering 42.30 BDL Providing and applying plaster / wall punning with plaster of As directed by Square 340.00 222.00
and Pointing paris ( with plaster of paris material of Ambuja / Mor Chap or Engineer in Meter
equivalent make ) in 10 to 13 millimeter thickness to previously charge.
plastered surface / or on newly brick surface ( Excluding rough
cast plaster ) in all position including preparing and Finishing
the surface scaffolding etc.complete.
Plastering 42.31 BDL Providing and applying gypsum plaster ( with Gypsum material As directed by Square NA NA
and Pointing of Gypsum India / Mega Sign or equivalent make ) with Engineer in Meter
finishing with gypsum material in 10 to 13 millimeter thickness charge.
to previously plastered surface / or on newly brick surface (
Excluding rough cast plaster ) in all position including preparing
and Finishing the surface scaffolding etc.complete.
Plastering 42.32 BDL Providing and applying Texture plaster with finishing with As directed by Square 505.00 200.00
and Pointing Purlina / Rustic texture material ( with texture material of Asian Engineer in Meter
/ Renava / Nitco/Temtex or equivalent company make ) in 3 to 4 charge.
millimeter thickness on previously finished plastered surface
,including Plaster Groove 6mm thickness or Tape Grooves 35 to
45 mm thickness or as required, in all position including
preparing the surface scaffolding etc.complete.
Plastering 42.33 BDL Removing the existing cement plaster of any thickness without As directed by Square NA NA
and Pointing causing dust nuisance and stacking the debris upto a distance of Engineer in Meter
50 metres or spreading in the compound and cleaning the site charge.
etc. complete.
Note : Following items to be executed after prior approval of
Plastering 42.34 BDL Providing and applying Two coats of wall care Putty of 2mm As directed by Square NA NA
and Pointing thickness for plastered surface and 5-6mm thickness finished Engineer in Meter
concrete surface to Ceiling and Walls to prepare surface even charge.
and smooth of Brands
BIRLA WHITE, BERGER, BISION, J.K., make, etc complete.
a) For plastered walls/ceiling 2mm
Plastering 42.35 BDL Providing and applying Two coats of wall care Putty of 2mm As directed by Square NA NA
and Pointing thickness for plastered surface and 5-6mm thickness finished Engineer in Meter
concrete surface to Ceiling and Walls to prepare surface even charge.
and smooth of Brands
BIRLA WHITE, BERGER, BISION, J.K., make, etc complete.
b) For finished concrete walls/ceiling 5 to 6mm
Plastering 42.36 BDL Providing cement patta / band of 2.50 cm width on either side of As directed by Square NA NA
and Pointing edges of plaster for doors & windows including scaffolding Engineer in Meter
,finishing, curing etc. complete. charge.
Plastering 42.37 BDL Providing groove to required size at specified location as As directed by Square NA NA
and Pointing directed by Engineer, at junction of brick masonry wall and Engineer in Meter
R.C.C beams or Column, at junction of composite masonry, charge.
including scaffolding, finishing, curing etc. complete.
Report Name: e DSR
per unit) unit)
Paving 43.01 BDM 1 Providing and laying Rough Shahabad Stone Flooring 25mm to Bd.M.1 Page Square 475.00 55.00
Flooring and 30mm thick and of required width in plain/ diamond pattern on a No. 379 Meter
dado bed of 1:6 C.M. including cement float, striking joints, pointing
in cement mortar 1:3 curing and cleaning etc. complete.
Paving 43.02 BDM 1A Providing and laying Rough Shahabad Stone Flooring 40mm.to Bd.M.1 Page Square 530.00 70.00
Flooring and 45 mm. thick & of required width in plain/ diamond pattern on a No. 379 Meter
in cement mortar 1:3 curing and cleaning etc. etc. complete
Paving 43.03 BDM 1B Providing and laying Rough Shahabad Stone Flooring 50mm to Bd.M.1 Page Square 595.00 89.00
Flooring and 60mm thick and of required width in plain/ diamond pattern on a No. 379 Meter
in cement mortar 1:3 curing and cleaning etc. etc. complete.
Paving 43.04 BDM 3 Providing and laying Polished Shahabad Stone flooring 25mm Bd.M.3 Page Square 600.00 92.00
Flooring and to 30mm thick and required width wide in plain/ diamond No. 380 Meter
dado pattern on a bed of 1:6 C.M. including cement float, filling
joints, with neat cement slurry, curing, polishing and cleaning
etc. complete.
Paving 43.05 BDM 3A Providing and laying Polished Tandur Stone flooring 25mm to Bd.M.3 Page Square 700.00 76.00
Flooring and 30mm thick required width in plain/ diamond pattern on a bed of No. 380 Meter
dado 1:6 C.M. including cement float, filling joints with neat cement
slurry, curing, polishing and cleaning etc. complete.
Paving 43.06 BDM 3B Providing and laying machine cut machine Polished Kota stone Bd.M.3 Page Square 890.00 115.00
Flooring and flooring 25mm to 30mm thick and required width in plain/ No. 380 Meter
dado diamond pattern on bed of 1:6 C. M. including cement float,
filling joints with neat cement slurry, curing, polishing and
cleaning etc. complete.
Paving 43.07 BDM Providing and laying handcut polished Kotah Stone flooring Bd.M.3 Page 0 NA NA
Flooring and 25mm to 30mm thick and 30cm wide in plain/diamond pattern No.380
dado on a bed of 1:6 C.M. including cement float, filling joints with
neat cement slurry, curing, polishing and cleaning etc. complete.
Paving 43.08 BDM Providing and laying polished hand cut Kotah Stone flooring Bd.M.3 Page 0 NA NA
Flooring and 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond No.380
dado pattern on
a bed of 1:6 C.M. including cement float, filling joints with neat
cement slurry, curing, polishing and cleaning complete.
Paving 43.09 BDM 7 Providing and laying cement concrete flooring 40 mm thick with Bd.M.7 Page Square 300.00 70.00
Flooring and M15 cement concrete laid to proper level and slope in alternate No. 383 Meter
dado bays including compaction, filling joints, marking lines to give
the appearance of tiles of 30 cm x 30 cm or other size laid
diagonally /square etc finishing smooth (with extra cement) in
any colour as directed and curing etc. complete. With Natural
Sand
Paving 43.01 BDM 7 Providing and laying cement concrete flooring 40 mm thick with Bd.M.7 Page Square NA NA
the appearance of tiles of 30 cm x 30 cm or other size laid
diagonally/ square etc finishing smooth (with extra cement) in
any colour as directed and curing etc. complete. With Crushed
Sand.
Paving 43.11 BDM 6 Providing and laying cement concrete flooring 40mm thick with Bd.M.6 Page Square NA NA
dado bays, including compaction, filling joints, marking lines to give
appearance of tiles of 30cm x 30cm or other size laid
diagonally/square etc. finishing smooth (with extra cement) in
any colour as directed and Curing etc. complete. With Natural
Sand
per unit) unit)
Paving 43.12 BDM 6 Providing and laying cement concrete flooring 40mm thick with Bd.M.6 Page Square NA NA
dado bays, including compaction, filling joints, marking lines to give
appearance of tiles of 30cm x 30cm or other size laid
diagonally/square etc. finishing smooth (with extra cement) in
any colour as directed and Curing etc. complete. With Crushed
Sand
Paving 43.13 BDM 7A Providing and laying cement concrete flooring 50 mm thick with Bd.M.7 Page Square 335.00 78.00
dado bays including compaction filling joints, marking lines to give
the appearance of tiles of 30cm x 30cm or other size laid
diagonally/ square etc finishing smooth (with extra cement) in
Sand
Paving 43.14 BDM 7A Providing and laying cement concrete flooring 50 mm thick with Bd.M.7 Page Square 330.00 78.00
dado bays including compaction filling joints, marking lines to give
diagonally/square etc finishing smooth (with extra cement) in
Sand.
Paving 43.15 BDM 6A Providing and laying cement concrete flooring 50mm thick with Bd.M.6 Page Square 350.00 78.00
Flooring and M20 cement concrete laid to proper level & slope in alternate No. 381 Meter
diagonally/ square etc. finishing smooth (with extra cement) in
Sand
Paving 43.16 BDM 6A Providing and laying cement concrete flooring 50mm thick with Bd.M.6 Page Square 365.00 78.00
Flooring and M20 cement concrete laid to proper level & slope in alternate No. 381 Meter
diagonally/ square etc. finishing smooth (with extra cement) in
Sand.
Paving 43.17 BDM 22 Providing and laying machine cut machine polished shahabad Bd.M.22 Page Square 695.00 278.00
Flooring and Stone slabs 20 to 25mm thick for treads and risers of steps and No. 390 Meter
dado staircases, with rounded nosing for the treads on a bed of 1:4
cement mortar including cement float, filling joints with neat
cement slurry, curing, polishing and cleaning etc. complete.
Paving 43.18 BDM 22B Providing and laying machine cut machine polished machine cut Bd.M.22 Page Square 950.00 278.00
Flooring and Kota stone slabs 20 to 25 mm thick for treads and risers of steps No. 390 Meter
dado and staircases, with rounded nosing for the treads on a bed of
1:4 cement mortar including cement float, filling joints with neat
cement slurry, curing, polishing and cleaning etc. complete.
Paving 43.19 BDM 29B Providing sills of polished Kota stone 25 mm to 30mm thick, on Bd.M.29 Page Square 870.00 182.00
Flooring and a bed of 1:4 cement mortar including cement float, filling joints No. 391 Meter
dado with slurry, curing polishing and cleaning etc. complete.
Paving 43.20 BDM 29C Providing sills of polished Kadappa stone 25mm to 30mm thick, Bd.M.29 Page Square 710.00 182.00
Flooring and on a bed of 1:4 cement mortar including cement float, filling No. 391 Meter
dado joints with slurry, curing polishing and cleaning etc. complete.
Paving 43.21 0 Providing sills of required material 20mm to 25mm thick, on a Spec.No.: Square NA NA
Flooring and bed of cement mortar 1:4 including cement float, filling joints Bd.M.31/Page Meter
dado with neat cement slurry, curing, polishing, rounding edges, No.392
cleaning complete.
a) Marble other than white makrana
Paving 43.22 0 Providing sills of required material 20mm to 25mm thick, on a Spec.No.: Square NA NA
Flooring and bed of cement mortar 1:4 including cement float, filling joints Bd.M.31/Page Meter
dado with neat cement slurry, curing, polishing, rounding edges, No.393
cleaning complete.
b) Granite
per unit) unit)
Paving 43.23 BDM 15 Providing and fixing black kadappa stone shelves 25mm. thick Bd.M.29 Page Square 710.00 182.00
Flooring and machine polished, extending the polish upto 20 cm width on No. 391 Meter
dado lowerside, rounding corners, laying in position jointing with
bedding cement mortar 1:4 proportion curing etc etc. complete.
Paving 43.24 BDM 12 Providing and laying ceramic tiles of RAK/ Kajaria/ Nitco/ Bd.M.12 Page Square 870.00 300.00
Flooring and Asian or equivalent make having size 30 cm x 30 cm confirming No. 385. Meter
dado I.S.15622/2006 (group D II-A)and 7 to 8 mm thick for flooring
in required position laid on a bed of 1:4 cement mortar including
cement float, filling joint with white/colour cement slurry
cleaning curing etc. complete.
Paving 43.25 BDM 13 Providing and laying ceramic tiles of RAK/Kajaria / Nitco Bd.M.13 Page Square 940.00 300.00
Flooring and /Asian or equivalent make having size 30 cm. x 30 cm. for dado No. 386. Meter
dado and skirting in required position with readymade adhesive
mortar of approved quality on plaster of 1:2 cement mortar
including joint filling with white/ colour cement slurry cleaning
curing etc. complete.
Paving 43.26 BDM 13 Providing and laying ceramic tiles of RAK/ Kajaria / Nitco Bd.M.13 Page Square 1030.00 350.00
Paving 43.27 BDM 13 Providing and laying ceramic tiles of RAK/ Kajaria / Nitco Bd.M.13 Page Square 1075.00 550.00
Paving 43.28 BDM Providing Mirror polishing to Kota Stone including using all As directed by Square 225.00 83.00
Flooring and necessary stones and equipments cleaning, washing etc. Engineer in Meter
dado complete. For Flooring charge.
Paving 43.29 BDM Providing Mirror polishing to Kota Stone including using all As directed by Running 50.00 18.00
Flooring and necessary stones and equipments cleaning, washing etc. Engineer in Meter
dado complete. For Skirting charge.
Paving 43.30 BDM Providing and laying in situ cement concrete M20 with tremix As directed by Square 585.00 90.00
Flooring and treatment for 100 mm thickness for flooring with groove cutting Engineer in Meter
dado of 4mm wide and 20mm deep with necessary refilling with charge
bitumen etc. complete.
Paving 43.31 BDM Providing and laying in situ cement concrete M30 with tremix As directed by Square 1200.00 150.00
Flooring and treatment for 200 mm thickness for flooring with groove cutting Engineer in Meter
dado of 4mm wide and 20mm deep with necessary refilling with charge
bitumen etc. complete.
Paving 43.32 BDM 35 Providing 25 mm to 30 mm thick partition of polished black Bd.M.35 B/P Square 905.00 160.00
Flooring and kadappa stone slab of approved quality including giving No.393 Meter
dado required size and shape etc. Fixing in cement mortar 1:3 curing
and cement etc. complete. a) One side polish
Paving 43.33 BDM 35 Providing 25 mm to 30 mm thick partition of polished black Bd.M.35 B/P Square 1100.00 125.00
Flooring and kadappa stone slab of approved quality including giving No.393 Meter
dado required size and shape etc. Fixing in cement mortar 1:3 curing
and cement etc. complete. b) Both side polish
Paving 43.34 BDM 3 Providing and laying in position flooring of telephone black / Bd.M. 3 Square 3300.00 213.00
Flooring and Amba White / Cat bary brown / Ruby red / Ocean Brown B/Page No. Meter
dado granite stone of approved shade and size 18 mm to 20 mm thick 380
on bed 1:6 cement mortar including cement floats striking joints,
pointing in C.M. 1:3 curing and cleaning etc. complete.
Paving 43.35 BDM 22 Providing and fixing machine cut machine polished 18 mm to 20 Bd. M.22 Square 3245.00 295.00
Flooring and mm thick telephone black / Amba White / Cat bary brown / RBI B/Page No. Meter
dado red / Ocean Brown granite stone for treads and risers of steps 390
and staircases of approved colour and shade with rounded
moulding and three grooved line for the treads on bed of 1:4
Cement mortar including float filling joints with neat cement
slurry curing polishing and cleaning etc. complete.
per unit) unit)
Paving 43.36 BDM 35 Providing and fixing machine cut mirror polished 18 mm to 20 Bd.M.35 Square 3345.00 290.00
Flooring and mm thick telephone black granite / Amba White / Cat bary B/Page No.393 Meter
dado brown / RBI red / Ocean Brown granite stone partition with
rounding the edges etc. complete . Both side polish
Paving 43.37 BDM 35 Providing and fixing machine cut mirror polished 18 mm to 20 Bd.M.35 Square 3100.00 160.00
Flooring and mm thick telephone black / Amba White / Cat bary brown / RBI B/Page No.393 Meter
dado red / Ocean Brown granite stone partition with rounding the
edges etc. complete. One side polish
Paving 43.38 BDM 35 Providing and preparing kitchen otta made up from 30 mm thick Bd.M.35C / Square 2508.00 910.00
Flooring and and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm Page No. 393 Meter
dado thick both side polished kadappa middle shelf and bottom of 20
mm thick one side polished kadappa with facia patti of 20 x 50
mm kadappa including all material labour cutting fixing with
cement mortar and araldite curing polished and cleaning etc.
complete.
Paving 43.39 BDM 35 Providing and fixing 1.5 mm thick polyvenyl venyl chloride Bd.M.35C / Square 477.00 12.00
Flooring and flooring including leveling the base with white cement including Page No. 393 Meter
dado pasting with appropriate material cleaning the surface etc.
complete
Paving 43.40 BDM 12 Providing and laying vitrified mirror / glossy finish tiles Bd.M. 12 Page Square 850.00 124.00
Flooring and decorative type RAK/ Kajaria/ Nitco/ Asian or equivalent make No.385 Meter
dado having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10
mm thickness and confirming to IS. 15622-2006 ( group Bla) of
approved make, shade and pattern for flooring in required
position laid on a bed of 1:4 cement mortar including neat
cement float, filling joints, curing and clearing etc. complete. a)
Flooring
Paving 43.41 BDM 12 Providing and laying vitrified mirror / glossy finish tiles of Bd.M. 12 Page Square 1190.00 122.00
Flooring and RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 No.385 Meter
dado mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness
and confirming to IS. 15622-2006 ( group Bla) of approved
make, shade and pattern for flooring in required position laid on
a bed of 1:4 cement mortar including neat cement float, filling
joints, curing and clearing etc. complete.b) Skirting
Paving 43.42 BDM 12 Providing and laying vitrified matt fininsh tiles of RAK/ Bd.M.12 Page Square 1240.00 209.00
Flooring and Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to No. 385 Meter
dado 605 mm x to 605 mm of 8 to 10 mm thickness and confirming
IS. 15622-2006 (Group Bla) of approved make, shade and
pattern for flooring in required position laid on a bed of 1:4
cement morar including neat cement float, filling joints, curing
and cleaning etc. complete. a) Flooring
Paving 43.43 BDM 12 Providing and laying vitrified matt finish tiles of RAK/ Kajaria/ Bd.M.12 Page Square 1400.00 125.00
Flooring and Nitco/ Asian or equivalent make having size 590 mm to 605 mm No. 385 Meter
dado x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-
2006 (Group Bla) of approved make, shade and pattern for
flooring in required position laid on a bed of 1:4 cement mortar
including neat cement float, filling joints, curing and cleaning
etc. complete. b) Skirting
Paving 43.44 BDM 12 Providing and laying vitrified rustic matt stone finish tiles of Bd.M.12 Page Square 1500.00 190.00
Flooring and RAK/Kajaria/ Nitco/ Asian or equivalent make having size 590 No. 385 Meter
dado mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness
and confirming to IS. 15622-2006 (Group Bla) of approved
make, shade and pattern for flooring in required position laid
?on a bed of 1:4 cement mortar including neat cement float,
filling joints, curing and cleaning etc. complete. a) Flooring
Paving 43.45 BDM 12 Providing and laying vitrified rustic matt stone finish tiles of Bd.M.12 Page Square 1650.00 125.00
Flooring and RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 No. 385 Meter
dado mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness
and confirming to IS. 15622-2006 (Group Bla) of approved
make, shade and pattern for flooring in required position laid
?on a bed of 1:4 cement mortar including neat cement float,
filling joints, curing and cleaning. etc. complete. b) Skirting
per unit) unit)
Paving 43.46 BDM 12 Providing and laying vitrified stone effect finish tiles of Bd.M. 12 Page Square 1750.00 207.00
Flooring and RAK/Kajaria/ Nitco/ Asian or equivalent make having size 590 No. 385 Meter
dado to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and
confirming to IS. 15622-2006 (Group Bla) of approved make,
shade and pattern for flooring in required position laid on a bed
of 1:4 cement mortar including required position laid on a bed of
1:4 cement mortar including neat cement float, filling joints,
curing and cleaning etc. complete a) Flooring
Paving 43.47 BDM 12 Providing and laying vitrified stone effect finish tiles of RAK/ Bd.M. 12 Page Square NA NA
Flooring and Kajaria/ Nitco/ Asian or equivalent make having size 590 to 605 No. 385 Meter
dado mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to
IS. 15622-2006 (Group Bla) of approved make, shade and
pattern for flooring in required position laid on a bed of 1:4
cement mortar including required position laid on a bed of 1:4
cement mortarincluding neat cement float, filling joints, curign
and cleaning etc. complete. b) Skirting
Paving 43.48 BDM 12 Providing and fixing green marble of 18 to 20 mm thick for door Bd. M. 12 Square 1570.00 510.00
Flooring and frame/ dado/ window boxing etc. On C.M. 1:6 including filling Meter
dado joints with polymer base filler nosing the sharp edges wherever
necessary, curing, etc. complete.
Paving 43.49 BDM Providing and fixing heavy duty inter locking concrete Gray A directed by Square NA NA
Flooring and paving blocks of 60 mm thickness of having a strength of 300 Engineer in Meter
dado kg/Sq.cm. of approved quality and shape on a bed of crushed charge
sand of 25 to 30 mm thick including skirting joints and cleaning
etc. complete.
Paving 43.50 BDM Providing and fixing heavy duty inter locking concrete Gray A directed by Square NA NA
etc. complete.
Paving 43.51 BDM Providing and fixing heavy duty inter locking concrete Coloured A directed by Square NA NA
etc. complete
Paving 43.52 BDM Providing and fixing heavy duty inter locking concrete Coloured As directed by Square NA NA
etc. complete
Paving 43.53 BDM 12 Providing and fixing heavy duty inter locking concrete Bd. M-12 page Square NA NA
Flooring and RUBBER MOULD GLOSSY PAVING BLOCKS of 60 No. 385 Meter
dado millimeter thickness of having a strength of 400 Kg/sq.m of
approved quality and shape on a bed of crushed sand of 25 to 30
millimeter thick including striking joints and cleaning etc.
complete. (using 100% crushed sand)
Paving 43.54 BDM Providing and fixing heavy duty inter locking concrete Rubber Bd. M. Square NA NA
Flooring and mould glossy paving blocks of 80 mm thickness of having a Meter
dado strength of 400 kg/Sq.cm. of approved quality and shape on a
bed of crushed sand of 25 to 30 mm thick including skirting
joints and cleaning etc. complete. (using 100% crushed sand)
Paving 43.55 BDM Providing and fixing heavy duty inter locking concrete Coloured As directed by Square NA NA
etc. complete.
Paving 43.56 BDM Providing leather finished polishing to Granite Stone slab by As directed by Square 430.00 100.00
Flooring and continuous grinding in 4 coats of different bits to receive rough Engineer in Meter
dado and matt finish including buffing process before laying and charge
fixing of stone as per drawing and design, including cleaning,
washing and finishing etc. complete.
per unit) unit)
Paving 43.57 BDM Providing leather finished polishing to Kota / Marble / Shahabad As directed by Square 380.00 94.00
Flooring and / Kadappa Stone slab by continuous grinding in 4 coats of Engineer in Meter
dado different bits to receive rough and matty finish including buffing charge
process before laying and fixing of stone as per drawing and
design, including cleaning, washing and finishing etc. complete.
Paving 43.58 BDM 12 Providing and laying Vitrified mirror/glossy finish RAK/ Bd. M-12 page Square 960.00 119.00
Flooring and Kajaria /Nitco / Aisan / Coral Or equivalent make having No. 385 Meter
dado decorative type of size 590 millimeter to 605 millimeter x 590
millimeter to 605 millimeter of 8 to 10 millimeter thickness (on a
existing flooring) with bonding chemical and confirming to IS
15622-2006 (Group Bla) of approved make shade and pattern
for flooring in required position laid on a bed of bonding
chemical filling joints curing and cleaning etc . complete.
Paving 43.59 0 Providing and laying Vitrified MATT finish RAK/ Kajaria Bd. M-12 page Square NA NA
Flooring and /Nitco / Aisan / Coral Or equivalent make having decorative No. 386 Meter
dado type of size 600 millimeter x 600 millimeter of 8 to 10
millimeter thickness (on a existing flooring) with bonding
chemical and confirming to IS 15622-2006 (Group Bla) of
approved make shade and pattern for flooring in required
position laid on a bed of bonding chemical filling joints curing
and cleaning etc .complete.
Paving 43.62 0 Providing and laying Vitrified RUSTIC MATT STONE finish Bd. M-12 page Square NA NA
Flooring and RAK/ Kajaria /Nitco / Aisan / Coral Or equivalent make having No. 386 Meter
dado decorative type tiles of size 600 millimeter x 600 millimeter of
8 to 10 millimeter thickness (on a existing flooring) with
bonding chemical and confirming to IS 15622-2006 (Group Bla)
of approved make shade and pattern for flooring in required
and cleaning etc. complete.
dado decorative type tiles of size900 millimeter x 900 millimeter of
dado decorative type tiles of size1000 millimeter x 1000 millimeter of
per unit) unit)
Paving 43.65 BDM 12 Providing and laying Vitrified STONE EFFECT FINISH RAK/ Bd. M-12 page Square 960.00 112.00
Flooring and Kajaria /Nitco / Aisan / Coral Or equivalent make having No. 385 Meter
dado decorative type tiles of size 590 millimeter to 605 millimeter x
590 millimeter to 605 millimeter of 8 to 10 millimeter thickness
(on a existing flooring) with bonding chemical and confirming
to IS 15622-2006 (Group Bla) of approved make shade and
pattern for flooring in required position laid on a bed of bonding
chemical filling joints curing and cleaning etc. complete.
Paving 43.66 BDM Providing and laying chequered tiles of approved quality of Bd. M-12 page Square 835.00 590.00
Flooring and company RAK / Kajaria / Nitco / Asian or equivalent make of No. 385 Meter
dado size 30 cm x 30 cm for flooring in required position laid on a
bed of 1:4 cement mortar including cement float, filling joint
with cement slurry cleaning curing etc. complete.
Paving 43.67 BDM Providing and laying Antiskid Ceramic tiles of approved quality Bd. M-12 page Square 970.00 510.00
Flooring and of company RAK / Kajaria / Nitco / Asian or equivalent make of No. 385 Meter
dado size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B
IIA) for antiskid flooring in required position laid on a bed of
1:4 cement mortar including cement float, filling joint with
cement slurry cleaning curing etc. complete.
Paving 43.68 BDM Providing and laying telephone black / Amba White / As directed by Square NA NA
Flooring and Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to Engineer-In- Meter
dado 20 mm thick for door frame/ dado/ window boxing etc. On C.M. Charge
1:6 including filling joints with polymer base filler nosing the
sharp edges wherever necessary, curing, etc. complete.
Paving 43.69 BDM Providing Half-round Moulding ( Full Moulding ) to 18 mm to As directed by Running 122.00 45.00
Flooring and 20 mm thick granite stone including fine polishing and cleaning Engineer-In- Meter
dado etc. complete Charge
Paving 43.70 BDM Providing Full-round Moulding ( Full Moulding ) to 18 mm to As directed by Running 103.00 100.00
Flooring and 20 mm thick Marble / Kota stone including fine polishing and Engineer-In- Meter
dado cleaning etc. complete. Charge
Paving 43.71 BDM Providing Quarter-round Moulding ( Half Moulding ) to 18 mm As directed by Running 99.00 45.00
Flooring and to 20 mm thick granite stone including fine polishing and Engineer-In- Meter
Paving 43.72 BDM Providing Quarter-round Moulding ( Half Moulding ) to 18 mm As directed by Running 79.00 45.00
Flooring and to 20 mm thick Marble / Kota stone including fine polishing and Engineer-In- Meter
Paving 43.73 BDM Providing Chamfer Of Required size to granite stone including As directed by Running 100.00 45.00
Flooring and fine polishing and cleaning etc. complete. Engineer-In- Meter
dado Charge
Paving 43.74 BDM Providing Chamfer of Required size to 18 mm to 20 mm thick As directed by Running 41.00 37.00
Flooring and Marble / Kota stone including fine polishing and cleaning etc. Engineer-In- Meter
dado complete Charge
Paving 43.75 BDM Providing and laying Polished Kota stone flooring With Hand- Bd. M-3 page Square 975.00 91.00
Flooring and Cut Polished Kota Stones 25mm to 30mm thick and required No. 380 Meter
dado width in plain/diamond pattern on bed of 1:6 Cement mortar
including cement float, filling joints with neat cement slurry,
curing, cleaning and Mirror Polishing etc. complete Note- Water
absorption for item No,19 should not exceed 0.05%.( Item to be
Paving 43.76 BDM Providing, laying & fixing exterior grade fibrilling fibre As directed by Square 1100.00 175.00
Flooring and reinforcement heavy duty designer cement concrete tiles for Engineer-In- Meter
dado Flooring of approved colour and design 22 +/ -2 mm thick bayer Char
colour pigmented as per IS ..1237 - 1980 having compressive
strength more than 500 kg/sq.cm reaffirmed in 2006 ,having
wert transvrse strenghth of 3.5 / mm 2, water absorption less
than 10 % abrasion / wear resistance less than 2 mm ,skid
resistance more than 25.0 (ASTM:E303) and no fading as per
DIN - 51094 like ultra tiles 300 x 300 or equivalent ,in plan /
designed pattern on a bed of 1:4 cement mortar including cement
float ,filling joints with neat cement slurry ,curing, polishing and
cleaning etc. complete. For flooring.
per unit) unit)
Paving 43.77 BDM Providing, laying & fixing exterior grade fibrilling fibre As directed by Square 1400.00 180.00
Flooring and reinforcement heavy duty designer cement concrete tiles for Engineer-In- Meter
dado steps and dado of approved colour and design 22 +/ -2 mm thick Char
bayer colour pigmented as per IS ..1237 - 1980 reaffirmed in
2006 ,having wert transvrse strenghth of 3.5 / mm 2, water
absorption less than 10 % abrasion / wear resistance less than 2
mm ,skid resistance more than 25.0 (ASTM:E303) and no
fading as per DIN - 51094 like ultra tiles or equivalent ,in plan /
designed pattern on a bed of 1:4 cement mortar including cement
float ,filling joints with neat cement slurry ,curing,polished and
cleaning etc. complete. For steps, and dado
Paving 43.78 BDM Machine polishing to cement/marble mosaic tiled flooring or any As directed by Square NA NA
Flooring and other type of flooring including cleaning, washing, etc. Engineer in Meter
dado complete. Charge
Paving 43.79 BDM Hand polishing to dado, skirting including cleaning, washing As directed by Square NA NA
Flooring and etc. complete. Engineer in Meter
dado Charge
Paving 43.80 BDM Providing wax polishing to floors and dado, preparing the As directed by Square NA NA
Flooring and surface, scaffolding etc. complete. Engineer in Meter
dado Charge
Report Name: e DSR
per unit) unit)
Wood Finish 44.01 BDN 1.1 Providing and applying boiled linseed oil in one coat, to the new Bd. N. 1. 1 Square 12.00 8.00
wood work, including knotting, preparing the surface, Page No. 399 Meter
scaffolding etc. complete as directed.
Wood Finish 44.02 BDN 1.1 Providing and applying boiled linseed oil in two coats to the new Bd.N.1.1 Page Square 21.00 9.00
wood work, including knotting, preparing the surface, No. 399 Meter
Wood Finish 44.03 BDN 1.2 Providing and applying Wax polish to the new wood work Bd.N.1.2 Page Square 25.00 13.00
including knotting, preparing the surface, scaffolding etc. No. 399 Meter
complete as directed.
Wood Finish 44.04 BDN 1.2 Providing and applying Wax polish to the old wood work Bd. N. 1.2 Square 20.00 11.00
including knotting, preparing the surface, scaffolding etc. Page No. 399 Meter
complete as directed.
Wood Finish 44.05 BDN 1.3 Providing and applying French polish for required finish on Bd.N.1.3 Page Square 55.00 18.00
previously polished wood including knotting, preparing the No. 399 Meter
surfaces, scaffolding etc. complete as directed
Wood Finish 44.06 BDN 1.3 Providing & applying french polish to new wood work, for Bd.N.1.3 Page Square 100.00 20.00
required finishing including. knotting, preparing the surfaces, No. 399 Meter
Wood Finish 44.07 BDN 1.4 Providing and applying varnish in one coat on previously Bd.N.1.4 Page Square 17.00 7.00
varnished wood work including knotting, preparing the surface, No. 400 Meter
scrapping, scaffolding, etc. complete.
Wood Finish 44.08 BDN 1.4 Providing and applying Varnish in two coats on new wood work Bd.N.1.4 Page Square 27.00 11.00
including knotting, preparing the surface, scaffolding etc. No. 400 Meter
Complete.
Wood Finish 44.09 BDN Providing and applying melamine polish of required finish to the As directed by Square 655.00 237.00
wood work by spray machine including knotting and preparing Engineer-in Meter
the even surface by scraping, applying French polish , charge.
scaffolding if required etc. complete.
Note:The work to be executed on prior approval of
Superintending Engineer will be necessary.
Wood Finish 44.01 BDN Providing and applying coal tar in one coat on previously coal As directed by Square NA NA
tarred wood including preparing the surface, scaffolding etc. Engineer-in Meter
complete. charge.
Wood Finish 44.11 BDN Providing and applying coal tar in two coats on new wood work As directed by Square NA NA
including preparing the surface, scaffolding etc. complete. (coal Engineer-in Meter
tar shall be minimum 500 grams per Sqm.) charge.
Report Name: e DSR
per unit) unit)
Oil Painting 45.01 BDO 1 Providing and applying two coats of lead/zinc base oil paint/ Bd.O. 1 Page Square 50.00 11.00
bituminous paint of approved colour and shade to new wood No. 403 Meter
work and fiber boards including preparing the surface, knotting,
scaffolding if necessary, excluding primer coat etc. complete.
Oil Painting 45.02 BDO 2 Providing and applying one coat of lead/zinc base oil paint/ Bd.0.2 Page Square 30.00 7.00
bituminous paint of approved colour and shade to old wood No. 404 Meter
work previously painted and fiber boards including if necessary
scaffolding, preparing surface excluding primer coat etc.
complete.
Oil Painting 45.03 BDO 2A Providing and applying two coats of lead/zinc base oil Bd.0.2 Page Square 40.00 10.00
paint/bituminious paint of approved colour and shade to old No. 404 Meter
wood work and fiber boards previously painted including if
necessary scaffolding, preparing the surface excluding priming
coat etc. complete.
Oil Painting 45.04 BDO 3 Providing & applying two coats of lead/zinc base oil paint/ Bd.0.3 Page Square 50.00 11.00
bituminious paint of approved colour to new structural steel No. 404 Meter
work and iron work in buildings including scaffolding if
necessary, cleaning and preparing the surface etc. complete.
(excluding primer coat).
Oil Painting 45.05 BDO 4 Providing and applying one coat of aluminium paint of approved Bd.O.4 Page Square 40.00 9.00
make to new structural steel work in building and workshop No. 405 Meter
including scaffolding if necessary, cleaning and preparing
surface (excluding primer coat) etc. complete.
Oil Painting 45.06 BDO 4A Providing and applying 2 coats of alluminium paint of approved Bd.0.4 Page Square 50.00 11.00
make to new structural steel work in buildings and workshops No. 405 Meter
including scaffolding if necessary, cleaning and preparing the
surface (excluding primer coat)etc. complete.
Oil Painting 45.07 BDO 5 Providing and applying two coats of synthetic enamel paint of Bd.O.5 Page Square 50.00 11.00
approved colour to new /old structural steel work and wood No. 405 Meter
work in buildings, including scaffolding if necessary, cleaning
and preparing the surface (excluding primer coat) etc. complete.
Oil Painting 45.08 BDO 6 Providing and applying one coat of flat oil paint of approved Bd.0.6 Page Square 35.00 9.00
colour to the old structural steel work and iron work previously No. 406 Meter
painted in building including scaffolding, if necessary, cleaning
and preparing surface (excluding primer coat) etc. complete.
Oil Painting 45.09 BDO 6A Providing and applying two coats of flat oil paint of approved Bd.0.6 Page Square 50.00 11.00
colour to the old structural steel work and iron work previously No. 406 Meter
painted in building including scaffolding, if necessary, cleaning
and preparing the surface (excluding primer coat) etc. complete.
Oil Painting 45.01 BDO 7 Providing and applying one coat of flat oil paint of approved Bd.0.7 Page Square 35.00 9.00
colour and shade to internal / external plastered surfaces No. 406 Meter
Oil Painting 45.11 0 Providing and applying two coats (exterior quality) of flat oil 0 Square NA NA
paint of approved colour and shade to the plastered surface in Meter
buildings and workshops including scaffolding if necessary,
cleaning the surface and preparing surface etc. complete.
(excluding primer coat)
Oil Painting 45.12 BDO 7A Providing and applying two coats of flat oil paint of approved Bd.O.7 Page Square 50.00 11.00
colour and shade to internal / external plastered surfaces No. 406 Meter
Oil Painting 45.13 BDO 8 Providing and applying two coats of water proof cement paint of Bd.0.8 Page Square 40.00 11.00
approved manufacture and of approved colour to the plastered No. 406 Meter
surfaces including scaffolding if necessary, cleaning and
preparing the surface, watering for two days etc. complete.
per unit) unit)
Oil Painting 45.14 0 Providing and applying two coats of water proof cement paint of As directed by Square NA NA
approved manufacture and of approved colour to old plastered Engineer- in- Meter
surfaces including scaffolding if necessary, cleaning and charge.
preparing the surface, watering for two days etc. complete.
Oil Painting 45.15 0 Providing and applying three coats of water proof cement paint Spec.No.: Square NA NA
of approved manufacture and of approved colour to new Bd.O.8/Page Meter
plastered surfaces including scaffolding if necessary, cleaning No.406
and preparing the surface, watering for two days etc. complete.
Oil Painting 45.16 0 Providing and applying three coats of water proof cement paint Spec.No.: Square NA NA
of approved manufacture and of approved colour to old Bd.O.8/Page Meter
plastered surfaces including scaffolding if necessary, cleaning No.406
and preparing the surface, watering for two days etc. complete.
Oil Painting 45.17 0 0 0 0 NA NA

Oil Painting 45.18 BDO 8B Removing old paint from steel and other metal surfaces and As directed by Square 8.00 8.00
making the surfaces even with hand scrapping, scaffolding etc. Engineer in Meter
complete. charge.
Oil Painting 45.19 BDO 8C Providing and applying priming coat over new wood and wood As directed by Square 20.00 6.00
based surfaces, including preparing the surface by thoroughly Engineer in Meter
cleaning oil, grease, dirt and other foreign matter, sand papering charge.
and knotting, scaffolding etc. complete.
Oil Painting 45.20 BDO 8D Providing and applying priming coat over new/old steel and As directed by Square 15.00 6.00
other metal surfaces including preparing the surface by En-gineer in Meter
thoroughly cleaning oil, grease, dirt and other foreign matter and charge.
scoured with wire brushes, fine steel wool, scrappers and sand
paper, scaffolding etc. complete.
Oil Painting 45.21 BDO 8E Providing and applying priming coat on concrete/ masonary/ As directed by Square 18.00 7.00
Asbestos Cement plastered surfaces including scaffolding if Engineer in Meter
necessary, preparing the surface by thoroughly cleaning oil, charge.
grease, dirt and other foreign matter and sand papering as
required etc. complete.
Oil Painting 45.22 BDO 8F Providing and applying one coat of seal cement primer of As directed by Square 12.00 6.00
approved manufacture and shed including scaffolding preparing Engineer in Meter
the surface by cleaning dirt and other foreign matters, scrapping charge.
if necessary including scaffolding etc. complete.
Oil Painting 45.23 BDO Providing and applying pearl/ luster finish paint of approved As directed by Square 210.00 40.00
colour and shade to the existing plaster surface including Engineer in Meter
scaffolding, preparing the surface, applying the acrylic wall putti charge.
etc. complete.
Oil Painting 45.24 BDO Providing and applying two coats of textured synthetic paint of As directed by Square 120.00 26.00
approved shade and quality and one coat of primer before Engineer in Meter
applying textured paint including scaffolding if necessary charge.
preparing surface by thoroughly cleaning oil, grease, dirt and
other materials as required, etc. complete.
Oil Painting 45.25 BDO Providing and applying two coats of appex Appex Ace white As directed by Square 160.00 41.00
exterior paint of approved manufacture and of approved colour Engineer in Meter
to the plastered surfaces including cleaning ,preparing the charge.
plaster surface ,applying primer coat ,scaffolding if necessary ,
and watering the surface for two days etc complete.
Oil Painting 45.26 BDO Providing and applying two coats of exterior white weather As directed by Square 145.00 60.00
shield paint of approved manufacture and of approved colour to Engineer in Meter
the plastered surfaces including cleaning ,preparing the plaster charge.
surface ,applying primer coat ,scaffolding if necessary , and
watering the surface for two days etc complete.
NOTE: For Item No. 15 to 18 prior approval of Superintending
Engineer will be necessary
Oil Painting 45.27 BDO Removing old paint from steel and other metal surface with As directed by Square NA NA
flame, cleaning and making the surface even and scaffolding etc. Engineer in Meter
complete. charge.
Oil Painting 45.28 BDO Removing old paint from steel and other metal surface with hand As directed by Square 8.00 8.00
scrapping, cleaning and making the surface even and scaffolding Engineer in Meter
etc. complete. charge.
Report Name: e DSR
per unit) unit)
Colouring 46.01 1 BDP 7D Providing and applying primer coat for wall surface to receive As directed Square NA NA
oil bound distemper treatment etc. complete. by Engineer- Meter
in-charge.
Colouring 46.02 BDP 1 Providing and applying white-wash in one coat on old / new Bd.P.1 Page Square 4.00 2.00
plastered or masonry surfaces and asbestos cement sheets No. 411 Meter
including scaffolding and preparing the surface by brushing &
brooming down etc. complete.
Colouring 46.03 BDP 1A Providing and applying white-wash in two coats on old / new Bd. P. I Page Square 6.00 3.00
plastered or masonry surfaces and asbestos cement sheets No. 411 Meter
including scaffolding and preparing the surface by brushing &
brooming down etc. complete.
Colouring 46.04 BDP 2 Providing and applying colour-wash of approved colour and Bd. P.2 Page Square 7.00 7.00
shade in one coat to new surface including scaffolding, brushing No. 412 Meter
and brooming down (excluding base coats of white wash) etc.
complete.
Colouring 46.05 BDP 2A Providing and applying colour-wash of approved colour and Bd.P.2 Page Bd.P.2 12.00 4.00
shade in two coats to new surface including scaffolding, No. 412 Page No.
brushing and brooming down (excluding base coat of white- 412
wash) etc. complete.
Colouring 46.06 BDP 3 Providing and applying colour-wash of approved colour and Bd.P.3 Page Square 11.00 2.50
shade in one coat to old surfaces which are to be recoloured No. 412 Meter
including scaffolding, brushing and brooming down. (excluding
base coat of white wash) etc. complete.
Colouring 46.07 BDP 3A Providing and applying colour-wash of approved colour and Bd.P.3 Page Square 12.00 5.00
shade in two coats to old surfaces which are to be recoloured No. 412 Meter
including scaffolding, brushing and brooming down. (excluding
base coat of white-wash) etc. complete.
Colouring 46.08 BDP 4 Providing and applying washable powder distemper of approved Bd.P.4 Page Square 13.00 5.00
colour and shade to old & new surfaces in one coat including No. 413 Meter
scaffolding, preparing the surfaces (excluding the priming
coat)etc. complete.
Colouring 46.09 BDP 4A Providing and applying washable powder distemper of approved Bd. P.4 Page Square 18.00 5.00
colour and shade to old and new surfaces in two coats including No. 413 Meter
scaffolding, preparing the surfaces. (excluding the primer coat)
etc .complete.
Colouring 46.01 BDP 5 Providing & applying washable oil-bound distemper of Bd. P.5 Page Square 25.00 9.00
approved colour and shade to old & new surfaces in one coat No. 413 Meter
including scaffolding, preparing the surfaces. (excluding the
primer coat.)etc. complete.
Colouring 46.11 BDP 5A Providing & applying washable oil-bound distemper of Bd.P.5 Page Square 35.00 11.00
approved colour and shade to old & new surfaces in two coats No. 413 Meter
including scaffolding, preparing the surfaces. (excluding the
primer coat.) etc. complete.
Colouring 46.12 BDP 6 Providing and applying plastic emulsion paint of approved Bd.P.6 Page Square 62.00 18.00
quality, colour and shade to old & new surfaces in two coats No. 414 Meter
including scaffolding, preparing the surface. (excluding the
primer coat)etc. complete.
Colouring 46.13 BDP 6A Providing and applying plastic emulsion paint of approved Bd.P.6 Page Square 70.00 18.00
quality, colour and shade to old surface in three coats including No. 414 & Pre- Meter
scaffolding, preparing the surface. (excluding primer coat) etc. approval of
complete. Superintendin
g Engineer
Colouring 46.14 BDP 6A Providing and applying plastic emulsion paint of approved Bd.P.6 Page Square NA NA
quality, colour and shade to new surface in three coats including No. 414 & Pre- Meter
scaffolding, preparing the surface. (excluding primer coat) etc. approval of
complete. Superintendin
g Engineer
Colouring 46.15 BDP Washing and cleaning of decorated wall surfaces with soap, As directed by Square NA NA
soda and water etc. complete. Engineer in Meter
charge.
Colouring 46.16 BDW Labour charges for applying two coats of alluminium paint for As directed by Number NA NA
flag-post including preparing the surface and primer coat etc. Engineer in
complete. charge.
per unit) unit)
Colouring 46.17 Providing and applying putty to old plastered surfaces in two As directed by Square NA NA
coats to receive approved paint in all positions including all Engineer in Meter
materials,labour scaffolding and curing etc. complete. charge.
Colouring 46.18 Providing and applying putty to new plastered surfaces in two As directed by Square NA NA
coats to receive approved paint in all positions including all Engineer in Meter
materials,labour scaffolding and curing etc. complete. charge.
Report Name: e DSR
per unit) unit)
Wood Work 47.01 BDQ 1 Providing and fixing Ghana teak wood planking 25 mm thick Bd.Q. 1 Page Square 1980.00 97.00
for flooring plained on both sides, tongued and grooved No. 419 Meter
including scaffolding, if necessary, and one coat of primer etc.
complete.
Wood Work 47.02 BDQ 1A Providing and fixing Ghana teak wood planking 50 mm thick Bd.Q.1 Page Square 4080.00 96.00
for flooring plained on both sides, tongued and grooved No. 419 Meter
including scaffolding, if necessary, and one coat of primer etc.
complete.
Wood Work 47.03 BDQ 2 Providing and fixing Ghana teak wood joists and girders in Bd.Q.2 Page Cubic 96500.00 2782.00
timber floors of single, double or framed type including No. 420 Meter
scaffolding if necessary, and one coat of primer etc. complete.
Wood Work 47.04 BDQ 2A Providing and fixing Jungle (hard) wood of approved species Bd.Q.2 Page Cubic 37500.00 3883.00
joists and girders in timber floor of single, double or framed type No. 420 Meter
including scaffolding if necessary and one primer coat etc.
complete.
Wood Work 47.05 BDQ 3 Providing and fixing Ghana teak wood plank ceiling 20 mm Bd.Q.3 Page Square 1960.00 141.00
thick plain underside tongued and grooved including iron No. 421 Meter
screws, scaffolding, if necessary, including one primer coat on
under side and one coat of coal tar on upper side etc. complete.
Wood Work 47.06 BDQ 4 Providing and fixing Ghana teak wood framed collar beam / Bd.Q.4, Page Cubic 92320.00 7157.00
king post / queen post truss, with all Iron work including No. 422 Meter
scaffolding, if necessary, and one coat of primer etc. complete.
Wood Work 47.07 BDQ 4A Providing and fixing in jungle wood framed collar beam / king Bd.Q.4, Page Cubic 48584.00 4194.00
post / queen post truss, with all iron work including scaffolding, No. 422 Meter
if necessary and primer coat etc. complete.
Wood Work 47.08 BDQ 5 Providing and fixing Ghana teak wood common rafters, purlins Bd.Q.5, Page Cubic 86680.00 6533.00
and purlin cleats, hip rafters, jack rafters, ridges, wall plates, No. 423 Meter
post plates and posts for roofing etc. including scaffolding, if
necessary, all iron work and one coat of primer etc. complete.
Wood Work 47.09 BDQ 5A Providing and fixing jungle wood common rafters, purlins and Bd.Q.5, Page Cubic 42969.00 4872.00
purlin cleats, hip rafters, jack rafters, ridges, wall plates, post No. 423 Meter
plates & posts for roofing, etc. including scaffolding, if
necessary all iron work and one coat of primer etc. complete.
Wood Work 47.01 BDQ 8 Providing and fixing Ghana teak wood hand rail of 60 mm x 75 Bd.Q.8, Page Running 720.00 304.00
mm as per detailed drawings or as directed by the Engineer, No. 425 Meter
including french polishing, etc. complete.
(Note : The work to be executed on preapproval of
Superintending Engineer).
Wood Work 47.11 0 Providing and fixing country teak wood two way trellis work Bd/Q-6 Square NA NA
with battens or laths 2.5 cm x 1.2 cm and 5 cm x 5 cm openings P-424 Meter
including frame of 8 cm x 5 cm vertical and horizontal
scantlings and coat of primer etc. complete.
Wood Work 47.12 0 Providing and fixing hard wood of approved species two way Bd/Q-6 Square NA NA
trellis work with battens or laths 2.5 cm x 1.2 cm and 5 cm x 5 P-425 Meter
cm openings including frame of 8 cm x 5 cm vertical and
horizontal scantlings and coat of primer etc. complete.
Wood Work 47.13 BDQ 18 Providing and fixing decorative teak plywood veneer lining 4 Bd.Q. 18 Page Square 926.00 169.00
mm thick with backing of Ghana teak wood frame work of No. 431 Meter
battens 12 mm X 25 mm at 30 cm center to center fixed to walls
and pillars without skirting and cornice as per drawings
including necessary iron work and finishing the exposed wood
work with french polish etc. complete.
Wood Work 47.14 0 Providing and fixing 20 mm thick superior veneer board pelmet As directed by Square NA NA
box 150 to 200 mm wide to doors or window frames including Engineer- in- Meter
20mm dia. Aluminium curtain rod with sockets and finishing charge.
with french polishing (without top)etc. complete.
per unit) unit)
Wood Work 47.15 0 Providing and fixing 20 mm thick Laminated sheet board pelmet As directed by Square NA NA
box 150 to 200mm wide to doors or window frames including Engineer- in- Meter
20 mm dia. Aluminium curtain rod with sockets and finishing charge.
with french polishing (without top) etc.complete.
Wood Work 47.16 BDQ 19 Providing and fixing Ghana teak wood eaves boards 15 cm wide Bd.Q. 19 Page Running 433.00 49.00
and 25 mm thick plain decorative type including scaffolding and No. 432 Meter
painting with two coats etc. complete.
Wood Work 47.17 BDQ 19A Providing and fixing seasoned and treated jungle wood of Bd.Q. 19 Page Running 205.00 98.00
approved species eaves board 15 cm wide and 25 mm thick No. 432 Meter
plain decorative type including scaffolding and painting with
two coats etc. complete.
Wood Work 47.18 BDQ 20 Providing and fixing Ghana Teak wood eaves plate of size 10cm Bd.Q.20 Page Running 231.00 49.00
wide and 20 mm thick including scaffolding and painting in two No. 432 Meter
coats etc. complete.
Wood Work 47.19 BDQ 21 Providing and fixing country teak wood barge board 22 cm wide Bd.Q.21 Page Running 448.00 71.00
and 20mm thick plain type including scaffolding and painting in No. 433 Meter
two coats etc. complete.
Wood Work 47.20 BDQ 21A Providing and fixing seasoned and treated jungle wood of Bd.Q.21 Page Running 240.00 132.00
approved species barge board 22 cm wide and 20 mm thick No. 433 Meter
plain type including scaffolding and painting in two coats etc.
complete.
Wood Work 47.21 BDQ Providing and fixing shutter to wall cupboard made from 19 mm As directed by Square 1808.00 274.00
thick Teak particle board with approved coloured laminated face Engineer in Meter
1.5 mm thick bonded with phenol formaldehyde synthetic resin charge.
B.W.P. grade including lipping beading iron oxidised fixtures
and fastening and oil primer coat etc. complete. (Excluding
cupboard frame).
Wood Work 47.22 BDQ Providing and fixing Shutter to wall Cupboard consisting of As directed by Square 2067.00 468.00
Ghana Teak Wood styles and Rails 25 mm thick and 75 mm Engineer in Meter
wide with panel insert of 12 mm thick particle Board with one charge.
approved coloured Laminated Face on one side 1.5 mm thick,
bonded with Phenol Formaldehyde Synthetic Resin including
Lipping Beading. Iron oxidised fixtures and fastening and oil
primer coat etc. complete. (Excluding cupboard frame).
Wood Work 47.23 BDQ 22 Providing and fixing jungle wood ballies of approved species Bd.Q.22/Page Rmt. NA NA
85 mm average dia. for common rafters, purlins, ridges, hip and No.434
valley
rafters, jack rafters, wall plates, post plates, posts etc. including
all iron work scaffolding if necessary and oiling in one coat etc.
complete.
Wood Work 47.24 BDQ 23 Providing and fixing 100 mm dia. Country teak wood ballies Bd.Q.22/Page Rmt. NA NA
for post truss of 6.00 m. span as per drawing or as directed by No.434
Engineerin-charge including all iron work, scaffolding if
necessary and oiling etc. complete.
Wood Work 47.25 3 Providing and applying Wax polishing to the old wood work Bd.N.1.2/Page Sq.M. NA NA
BDN including knotting, preparing the surface, scaffolding etc. No.399
12 B complete as directed.
Report Name: e DSR
per unit) unit)
Roofing and 48.01 BDR 1 Providing and fixing Mangalore tiled roofing with class ' AA' Bd.R.1, Page Square 458.00 56.00
Ceiling tiles including securing the last course of tiles near the eaves No. 449 Meter
with steel flat 40 mm x 3 mm and 1.22 mm wire fixing 50 mm x
25 mm horizontal teak wood battens and iron works and oiling
the battens etc. complete. (Excluding ridge and hip tiles).
Roofing and 48.02 BDR 2 Providing and fixing Mangalore tiled roofing with class 'AA' Bd.R.2, Page Square 667.00 60.00
Ceiling tiles including securing the last course of tiles near the eaves No. 450 Meter
with steel flat 40 mm x 3 mm and 1.22 mm wire fixing country
teak wood sloping battens of 25 x 12 mm teak wood horizontal
battens of 50mm x 25mm over the slopping battens, all iron
work and coal tarring the battens etc. complete (Excluding ridge
& hip tiles).
Roofing and 48.03 BDR 3 Providing and fixing Mangalore tile ridge and hip tiles of class Bd.R.3, Page Running 125.00 24.00
Ceiling 'AA' including scaffolding if necessary, pointing with coloured No. 450 Meter
cement mortar and curing etc. complete.
Roofing and 48.04 BDR 5 Providing and fixing corrugated galvanised iron sheets of Bd.R.5, Page Square 674.00 42.00
Ceiling 0.63mm thick (24 B.W.G.) for roofing without wind tiles No. 453 Meter
including fastening with galvanised iron screws & bolts, lead &
bitumen washers as per drawing etc. complete.(Weight of 5.5
kg/sq.m.).
Roofing and 48.05 BDR 5 Providing and fixing plain zinc sheeting of 0.80 mm thick (22 Bd.R.5, Page Square 760.00 101.00
Ceiling B.W.G.) over the ridge hip or valley to galvanized iron sheet No. 453 Meter
roofing including all fastening and bolt galvanised iron screws
and bolts, lead and bitumen washers etc. complete.(Weight of
6.8 kg/sq.m.).
Roofing and 48.06 BDR 7 Providing and fixing 6.00 mm thick ISI mark Asbestos Cement Bd. R.7, Page Square 367.00 54.00
Ceiling Corrugated sheet roofing including galvanised iron 'J' or 'L' hook No. 453 Meter
bolts galvanised iron band bituminous G.I. washers, galvanised
iron clamps, bolts, nuts and scaffolding etc. complete.
Roofing and 48.07 BDR 9 Providing and fixing 6 mm thick ISI mark Asbestos Cement Bd.R.9, Page Running 310.00 37.00
Ceiling ridge capping for roofing including galvanised iron hooks, bolts, No. 455 Meter
galvanised iron and bituminous washers, galvanised iron clamps,
bolts, nuts including scaffolding etc. complete.
Roofing and 48.08 BDR 10 Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain Bd. R. 10, Page Running 1750.00 129.00
Ceiling galvanised iron sheets 120 cm wide with teak wood planking 20 No. 455 Meter
mm thick including two coats of coal-tarring the upper surface
of plank etc. complete. (excluding painting to underside of
plank).
Roofing and 48.09 BDR 10A Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain Bd. R. 10, Page Running 1350.00 150.00
Ceiling galvanised iron sheets 90 cm wide with teak wood planking 20 No. 455 Meter
mm thick including two coats of coal-tarring the upper surface
of plank etc. complete. (excluding painting to underside of
plank).
Roofing and 48.01 BDR 10B Providing and fixing valley gutter of 24 B.W.G. (0.63 mm) thick Bd. R. 10, Page Running 1450.00 130.00
Ceiling G.I. sheet 120 cm wide with 20 mm thick teak wood planking No. 455 Meter
underneath coal tarring etc. complete.
Roofing and 48.11 BDR 11 Providing and fixing glass tiles of Mangalore type at required Bd. R. 11, Page Number 332.00 18.00
Ceiling places in Mangalore tile roof including scaffolding if necessary No. 456
etc. complete.
Roofing and 48.12 BDR 13 Providing and fixing Mangalore pattern cowl ventilator tiles in Bd. R. 13, Page Number 92.00 15.00
Ceiling the required places in a Mangalore tiled roof including No. 459
scaffolding if necessary etc. complete.
Roofing and 48.13 BDR 16 Providing and fixing false ceiling of plain asbestos cement Bd.R.16, Page Square 928.00 110.00
Ceiling sheets 4 mm thick with teak wood beadings 45 x 12 mm with No. 460 Meter
frame work of teak wood battens of size 70 x 60 mm at 1.00 M
center to center including scaffolding, if necessary, all iron work
and painting (visible surfaces) to A.C. sheet and beading in two
coats etc. complete. (excluding T.W. runner to be paid
separately).
per unit) unit)
Roofing and 48.14 BDR Providing and fixing frame work of anodised aluminium As directed by Square 809.00 440.00
Ceiling sections for suspended false ceiling consisting of aluminium T Engineer in Meter
50 mm x 40 mm weighing 0.39 kg/m. at 60 cms c/c & fixed with charge.
( 15 x 15 mm) flanges weighing 0.119 kg/m suspended on 6 mm
dia. mild steel rod weighing 0.22 kg/m fixed on wall and beams
including rounding of the edges with aluminium T of 50 mm x
40 mm weighing 0.39 kg/m etc. including all labour etc.
complete.
Roofing and 48.15 BDR Providing and fixing frame work of galvanised iron for As directed by Square 625.00 402.00
Ceiling suspended false ceiling which includes galvanised iron perimeter Engineer in Meter
channels of size 27 mm & 0.5 mm thick having one flange of 20 charge.
mm and another of 30 mm along with perimeter of the ceiling,
fixing in brick wall / partition with the help of rawal plugs and
screws, suspending galvenised iron intermediate channels of size
45 mm and 0.9 mm thick with two flanges of 15 mm each from
the soffit at 1200 mm centers with steel galvanised iron hanger
of width 25 mm x 0.5 mm fasteners, ceiling section of 0.5 mm
thickness having curved wedge of 51.5 mm and two flanges of
26 mm each with lips of 10.5 mm fixed to the intermediate
channel with the help of connecting clips and in direction
perpendicular to the intermediate channel at 450 mm centers,
12.5 mm dry walls screws at 230 mm centers; fixing screws
mechanically either with screw driver or drilling machine with
suitable attachment etc. complete.
Roofing and 48.16 BDR 17 Providing and fixing false ceiling of teak wood particle board Bd. R. 17 Page Square 725.00 110.00
Ceiling half perforated sheet 12 mm thick including scaffolding, if No. 461 Meter
necessary, all iron work and two coats of oil painting to boards
and beading i.e. visible surface etc. complete. (excluding frame
work and runners)
Roofing and 48.17 BDR Providing and fixing false ceiling of 10 to 12 mm thick As directed by Square 730.00 114.00
Ceiling decorative boards of fibrous plaster of paris including Engineer in Meter
scaffolding if necessary all architectural work like mouldings, charge.
cornices, coves, domes, cups as per detailed drawings and three
coats of spray painting to boards etc. complete. (excluding frame
work, runners and mild steel suspenders).
Roofing and 48.18 BDR 19 Providing and fixing false ceiling of 12mm thick tubular Bd. R. 19 Page Square 1449.00 415.00
Ceiling Acoustic Armstrong/ Everest/ AMS boards of approved make, No. 462 Meter
shape and sizes as per drawings including powder coated G.I.
wall angle of 20mm x 20mm size, G.I. grid runners of size
20mm x 38mm at 600mm center to center both ways and
suspended using G.I. 3mm wire including fixing using butterfly
clips and fasteners including transporting, scaffolding all
necessary labour and machinery, finishing etc. complete.
Roofing and 48.19 BDR Providing and fixing false ceiling of 15mm thick Acoustic As directed by Square 1541.00 395.00
Ceiling tubular Armstrong/ Everest/ AMS (0.60 x 0.60 m.) boards of Engineer in Meter
approved make, shape and sizes as per drawings including charge.
powder coated G.I. wall angle of 20 mm x 20 mm x 0.60 mm
size, G.I. grid runners of size 15 mm x 38 mm at 600 mm center
to center both ways and suspended using G.I. 3 mm wire
including fixing using butterfly clips and fasteners including
transporting, scaffolding all necessary labour and machinery,
finishing etc. complete.
Roofing and 48.20 BDR 17 Providing and fixing false ceiling of T.W. partical board half Bd. R. 17, Page Square 1113.00 110.00
Ceiling perforated sheets 12 mm thick with frame work of M.S. angle 40 No. 461 Meter
x 40 x 5 mm and T of size 40 x 40 x 6 mm at 60 cm center to
center including 12 mm dia. hangers, T.W. battens 50 x 25 mm
and beading 25 x 15 mm thick scaffolding, if necessary, all iron
work and two coats of painting to boards and beading i.e. visible
surface etc. complete.
per unit) unit)
Roofing and 48.21 BDR 17 Providing and fixing False ceiling of 12 mm thick Laminated Bd. R. 17, Page Square 1831.00 330.00
Ceiling board with frame of M.S. angle 40 x 40 x 5 mm and Tee of size No. 461 Meter
40 x 40 x 6mm at 60 cm c/c including 12 mm dia. hangers, T.W.
battens 50 x 25 mm and beading 25 x 15 mm thick scaffolding if
necessary, all Iron work etc. complete.
Roofing and 48.22 BDR Providing and applying two coats of bitumen to roof on new As directed by Square 53.00 18.00
Ceiling dungaree cloth one coat on each side etc. complete as directed. Engineer in Meter
charge.
Roofing and 48.23 BDR Providing and applying one coat of bitumen to roof (without As directed by Square 25.00 15.00
Ceiling cloth) including scaffolding etc. complete as directed. Engineer in Meter
charge.
Roofing and 48.24 BDR Removing and resetting Mangalore tiles from roof including As directed by Square 30.00 20.00
Ceiling refixing loose battens etc. complete. Engineer in Meter
charge.
Roofing and 48.25 BDR Removing the tiles, battens and dungry cloth purlins, rafters and As directed by Square 17.00 17.00
Ceiling ridges etc. from roof, sorting out the serviceable and Engineer in Meter
unserviceable materials and stacking the same as and where charge
directed in the compound, scaffolding etc. complete.
Roofing and 48.26 BDR Removing G.I. or A.C. sheet roofing including purlins, principal As directed by Square 41.00 41.00
Ceiling rafters etc. including sorting serviceable and unserviceable Engineer in Meter
materials, stacking the same as and where directed in the charge.
compound including scaffolding etc. complete.
Roofing and 48.27 BDR Removing and lowering the roof truss carefully without As directed by Square 123.00 123.00
Ceiling damaging the members and stacking as and where directed in Engineer in Meter
the compound including scaffolding etc. complete. charge.
Roofing and 48.28 BDR Removing R.S. girders of any size and span lowering the same As directed by Metric 1083.00 1140.00
Ceiling and stacking neatly wherever directed in the compound Engineer in Tonne
scaffolding etc. complete. charge.
Roofing and 48.29 BDR Providing fixing teak wood battens 50 mm x 25 mm for As directed by Running 65.00 7.00
Ceiling Mangalore tile roof work with all iron work scaffolding and Engineer in Meter
oiling the battens etc. complete. charge.
Roofing and 48.30 BDR Providing fixing teak wood battens 25 mm x 12 mm for As directed by Running 41.00 9.00
Ceiling Mangalore tile roof work with iron work scaffolding and oiling Engineer in Meter
the battens etc. complete. charge.
Roofing and 48.31 BDR Providing and fixing sky light in R.C.C. roof including frame As directed by Square 1000.00 65.00
Ceiling made of M.S. angle 50 x 50 x 6 mm with hold fast, sheet glass 5 Engineer in Meter
mm thick, Chicken mesh 24 gauge with all accessories and charge.
required fixtures and fastening fitting including painting etc.
complete.
Roofing and 48.32 BDR Providing and fixing 12 mm dia. mild steel bar upto 0.5 M. As directed by Number 60.00 25.00
Ceiling length for anchor rods with necessary threading nuts and bolts Engineer in
etc. complete. charge.
Roofing and 48.33 BDR 3 Providing fixing Mangalore tile roofing with class AA tiles in Bd. R. 3A., Square 571.00 94.00
Ceiling cement mortar 1:4 on sloping slab including necessary Page No. 449 Meter
scaffolding, curing, finishing, etc. complete.
per unit) unit)
Roofing and 48.34 BDR Providing and fixing colour coated Zincalume ( R ) AZ150 ( min As directed by Square 820.00 58.00
Ceiling 150 gms/sq.mt. total on each side ) profiled sheets for roofing. Engineer in Meter
The feed material is manufactured out of nominal 0.45 mm Base charge.
Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with
min.550 MPa yield strength, metallic hot dip coated with
Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6%
silicon) with COLORBOND ( R ) steel quality super durable
polyester paint coat ( with inorganic pigment). The paint shall
have a total coating thickness of nominal 35 um, comprising of
nominal 25 um exterior coat on top surface and nominal 10 um
reverse coat on back surface. Profile sheet shall have nom. 950-
1050 mm effective cover width and nominal 25-30 mm deep
ribs with subtle square fluting in the five pan at nominal 180-
250 mm center-to-center. The end rib shall be designed for anti-
capillary groove. & return leg. The feed material should have
coil manufacturers product details marked a regular interval.
Including fasteners with min. fastened with min. 25 um Zinc-Tin
alloy coated, Hex head, self-drilling screw etc. complete.
(weight of profile 4.52 kg/sqm)
Roofing and 48.35 BDR Providing and fixing of colour coated Zincaluminium( R ) As directed by Running 935.00 58.00
Ceiling AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets Engineer in Meter
for roofing. The feed material is manufactured out of nominal charge.
0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-
strength steel with min.550 MPa yield strength, metallic hot dip
coated withAluminium-Zinc alloy (55% aluminiumm 43.4%
zinc 1.6% silicon) with COLORBOND ( R ) steel quality super
durable polyster paint coat ( with inorganic pigment). The paint
shall have a total coating thickness of nominal 35 mm,
comprising of nominal 25mmexterior coat on top surface and
nominal 10 um reverse coat on back surface. Profile sheet shall
have nom. 950-1050 mm effective cover width and nominal 25-
30 mm deep ribs with sublet square fluting in the five pan at
nominal 180-250 mmcenter-to-center. The end rib shall be
designed for anti-capacity groove. & return leg. The feed
material should have coil manufacturers product details marked
a regular interval. including fasteners with min. fastened with
min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw
etc. complete. (weight of profile 4.52 kg/sqm) 301 mm to 600
mm girth (Surface Width).
Roofing and 48.36 BDR Providing and fixing of colour coated Zinc aluminium ( R ) As directed by Running 1135.00 58.00
Ceiling AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets Engineer in Meter
for roofing. The feed material is manufactured out of nominal charge.
0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-
strength steel with min.550 MPa yield strength, metallic hot dip
coated with Aluminium-Zinc alloy (55% aluminiumm 43.4%
zinc 1.6% silicon) with COLORBOND ( R ) steel quality super
durable polyster paint coat ( with inorganic pigment). The paint
shall have a total coating thickness of nominal 35 um,
comprising of nominal 25um exterior coat on top surface and
nominal 10 um reverse coat on back surface. Profile sheet shall
have nom. 950-1050 mm effective cover width and nominal 25-
30 mm deep ribs with subtle square fluting in the five pan at
nominal 180-250 mm center-to-center. The end rib shall be
designed for anti-capacity groove. & return leg. The feed
material should have coil manufacturers product details marked
a regular interval. including fasteners with min. fastened with
min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw
etc. complete. (weight of profile 4.52 kg/sqm) 601 mm to 900
mm girth (Surface Width).
Roofing and 48.37 BDR Providing and fixing UPVC Roof made up of 3 layers roofing As directed by Square 1015.00 65.00
Ceiling material of thickness 2mm having width of 1130 mm and of Engineer in Meter
required Length having Tensile strength not less than 330 charge.
kg/cm2, including fastening with self drilling screw having
washers made of stainless steel etc. complete.
per unit) unit)
Roofing and 48.38 BDR Providing and fixing PVC coloured Ridge tiles over UPVC As directed by Square 557.00 40.00
Ceiling roofing where required having size 113cm x 41cm and height Engineer in Meter
9.5 cm for ridge including fastening with self drilling screw charge.
having washers made of stainless steel etc. complete.
Roofing and 48.39 BDR Providing and fixing 15 mm thick eco-friendly densified edge As directed by Square 1805.00 225.00
Ceiling calcium silicate false ceiling (like aeroltie) of approved texture Engineer in Meter
spintone/cosmos/hexa or equivalent of size 595mm x 595mm in charge.
true horizontal level, suspended on interlocking metal grid of hot
dipped galvanized steel sections (galvanising at @12 gm/sq.m
including both sides)consisting of main T runner suitably spaced
at joints to get required length and size 24X38mm. made from
0.33mm thick(minimum ) sheet, spaced 1200mm center to
center and cross T of size 24X28mm made of 0.33mm
thick(minimum ) sheet to be interlocked at the middle of the
1200x600 mm panel to form the grid of size 600x600mm resting
on periphery walls/partitions on a perimeter wall angle precoated
steel of size 24x24x3000 made of 0.4 mm thick (minimum)
sheet with the help of all plugs at 450mm and laying 15 mm
thick densified edges calcium silicate ceiling tiles of approved
texture (spintone/cosmos/hexa) in the grid, including light
fittings , fixtures , smoke detectors etc., wherever required. Main
T runners suspended from ceiling with using G.I. slotted cleats
of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And
50mm long dash fasteners, 4mm G.I. adjustable rods with
galvanized steel levels clips of size 85x30x0.8mm, spaced at
Roofing and 48.40 BDR Providing and fixing false ceiling with eco-friendly light-weight As directed by Square 2010.00 225.00
Ceiling calcium silicate tiles of spintone surface texture aerolite make or Engineer in Meter
equivalent of size 595mm x 595mm having 15mm thick charge.
densified micro look edge and 100% humidity resistance
incombustible as per BS 46part IV and thermal conductivity
0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level
suspended grid of size 600x600mm made from hot dipped G.I.
steel sections ion silhouette profile, rotary stitched double
webbed white with 6mm reveal profile (white/black), wherein,
main T runner of size 42mmx14mm between main tee 600mm
center-tocenter and secondary cross T of size 33x14x0.43mm
thick of length 600mm long spaced inter-locked at middle of the
first crossed T in each panel to form grid of 1200mmx600mm
resting on periphery wall Profile wall section 19mm (7+7) x
19mmx0.40thicknesses and laying false ceiling for services like
diffusers grills including cutting, making opening for light
fittings, fixtures, , smoke detectors etc., wherever required. Main
T runners suspended from ceiling with using G.I. soffit cleats of
size 25x35x1.6 mm of required length fixed to the ceiling with
6mm dia and 50mm long dash fastener, 4mm dia G.I. adjustable
rods with powder-coated/good quality G.I. level adjustment clips
Roofing and 48.41 BDR Providing and fixing self supporting steel roofing system As directed by Square 1709.00 2.00
Ceiling (Proflex) for a Godown or alike made up of structural grade Engineer in Meter
steel sheet of 912 millimeter width ( tolerance +/- 2 millimeter ), charge.
moulded at site using mechanical press dies to the desired curve
and shape to form 605 millimeter wide interlocking panels . The
interlocking panels shall be pressed to close the seam forming
water tight joints for a span of 15.30 meter having arch rise as
3.06 meter, arch length 17.75 meter. The base material made up
of imported galvalume steel complying to ASTM A792 having
base metal thickness of 0.80 millimeter ( tolerace + / - 0.02
millimeter ) with alloy coating AZ 150 and paint coating of
regular modified polyster , top coat 25 micron and bottom coat
12 micron as per approved colour , including fixing hangers ,
clamps etc.as may be necessary of Proflex standard, including
fixing sky light of 2 millimeter thick polycarbonate sheet of size
2' x 7' and turbo ventilator of 24'' diameter to be installed at
every 30 feet along the length of roof including finishing, testing
per unit) unit)
steel sheet of 912 millimeter width ( tolerance + / - 2 millimeter charge.
), moulded at site using mechanical press dies to the desired
curve and shape to form 605 millimeter wide interlocking panels
. The interlocking panels shall be pressed to close the seam
forming water tight joints for a span of 21.30 meter having arch
rise as 4.26 meter, arch length 25.13 meter. The base material
made up of imported galvalume steel complying to ASTM A792
having base metal thickness of 1.00 millimeter ( tolerace + / -
0.02 millimeter ) with alloy coating AZ 150 and paint coating of
every 30 feet along the length of roof including finishing ,
testing and cleaning etc. complete.
rise as 5.00 meter, arch length 29.00 meter The base material
rise as 5.75 meter, arch length 33.92 meter. The base material
12 micron as perapproved colour , including fixing hangers ,
per unit) unit)
Roofing and 48.45 BDR Providing & Fixing of Armstrong or equivalent Mineral Fibre As directed by Square 2297.00 145.00
Ceiling Acoustical Suspended Ceiling System with ultima (Bevelled Engineer in Meter
Tegular) Edge Tiles With Armstrong or equivalent 15mm charge.
Exposed GRID. The tiles should have Humidity Resistance
(RH) of 99%, NRC 0.7, Light Reflectance 85%, Thermal
Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire
Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module
size of 600 x 600 x 20mm , suitable for Green Building
application, with Recycled content of 32%. The tile shall be laid
on precoated G.I.channel on XL2 Clip having a web height of
32 mm with 15 mm wide T - section flanges colour white
having rotary stitching on all T sections i.e. the Main Runner,
1200 mm & 600 mm Cross Tees with a web height of 32 mm
and a load carrying capacity of 7.7 Kgs/M2 & minimum pull out
strength of 100 Kgs.. The T Sections have a Galvanizing of 90
grams per M2 and need to be installed with Suspension system
of Armstrong or equivalent make. . The Tile & Grid system used
together should carry a 10 year warranty. products approved as
per GRIHA and BS 476 etc. complete.
Roofing and 48.46 BDR Providing & Fixing of Armstrong or equivalent Mineral Fibre As directed by Square 1596.00 148.00
Ceiling Suspended Ceiling System with Bioguard (Bevelled Tegular) Engineer in Meter
EDGE TILES WITH ARMSTRONG or Equivalent 15mm charge.
Exposed GRID. The tiles should have Humidity Resistance
(RH) of 99%, Light Reflectance 90%, Thermal Conductivity k =
0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class
0/Class 1 (BS 476 Part 6 & 7), in module size of 600x600 x
16mm with Anti Microbial coating on the face of the tile,
suitable for Green Building application, with Recycled content
of 34%. The tile shall be laid on precoated G.I. channel on XL2
Clip having a web height of 32 mm 32 with 15 mm wide T -
section flanges colour white having rotary stitching on all T
sections i.e. the Main Runner & 1200 mm Cross Tees with a
web height of 32 mm and a load carrying capacity of 7.7
Kgs/M2 & pull out strength of 100Kgs. . The T Sections have a
Galvanizing of 90 grams per M2 and need to be installed with
Suspension system of Armstrong or equivalent make. The Tile &
Grid system used together should carry a 10 year warranty.
products approved at GRIHA and BS 476 etc. complete.
Roofing and 48.47 BDR Providing & Fixing of Armstrong or Equivalent Soft Fibre As directed by Square 2149.00 148.00
Ceiling Acoustical Suspended Ceiling System with Optra (Bevelled Engineer in Meter
Exposed Grid. The tiles should have Humidity Resistance (RH)
of 95%, NRC 0.9 - 1.0, Light Reflectance ?85%, Colour White,
Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in
module size of 600 x 600 x 15mm , suitable for Green Building
application, with Recycled content of 66% GW & 74% RW. The
tile shall be laid on precoated G.I channel 32 with 15 mm wide T
- section flanges colour white having rotary stitching on all T
sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees
with a web height of 32 mm and a load carrying capacity of 7
Kgs/M2 with a minimum pull out strength of 100 kgs. The T
Sections have a Galvanizing of 90 grams per M2 and need to be
installed with Suspension system The Tile & Grid system used
together should carry a 10 year warranty. products approved as
per GRIHA and BS 476 etc. complete.
per unit) unit)
Roofing and 48.48 BDR Providing & Fixing of Armstrong OR equivalent GI Lay in Plain As directed by Square 1646.00 148.00
Ceiling metal ceiling consisting of 600x600mm Lay in tiles of pre Engineer in Meter
coated galvanized steel in 0.5 mm thickness in Global white charge.
color tile to be laid on Armstrong or equivalent grid systems
with 15mm wide T - section flanges color white having rotary
stitching on the Main Runner, 1200 mm & 600 mm Cross
Tees.Providing & Fixing of GI Lay in Plain metal ceiling
consisting of 600x600mm Lay in tiles of pre coated galvanized
steel in 0.5 mm thickness in Global white color tile to be laid on
grid systems with 15mm wide T - section flanges color white
having rotary stitching on the Main Runner, 1200 mm & 600
mm Cross Tees.products approved as per GRIHA and BS 476
etc. complete.
Roofing and 48.49 BDR Providing & Fixing of Armstrong OR equivalent Mineral Fibre As directed by Square 1453.00 148.00
Ceiling Acoustical Suspended Ceiling System with Dune (Bevelled Engineer in Meter
Exposed Grid. The tiles should have Humidity Resistance (RH)
of 99%,NRC 0.5, Light Reflectance 85%, Thermal Conductivity
k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK
Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600
x 16mm , with Recycled content of 35 %. The tile shall be laid
on precoated G.I.channel height 32 with 15 mm wide T - section
flanges colour white having rotary stitching and XL2 CLIP on
all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross
Tees with a web height of 32mm and a load carrying capacity of
7.57 Kgs/M2 & pull out stength of minimum 100 Kgs.. The T
Sections have a Galvanizing of 90 grams per M2 and need to be
installed with Suspension system of Armstrong OR equivalent
make. The Tile & Grid system used together should carry a 10
year warranty.approved as per GRIHA and BS 476 etc.
complete.
Roofing and 48.50 BDR Providing & Fixing of Armstrong OR equivalent Mineral Fibre As directed by Square 1264.00 148.00
Ceiling Acoustical Suspended Ceiling System with Fine Fissured Engineer in Meter
(Bevelled Tegular) Edge Tiles With Armstrong or equivalent charge.
15mm Exposed Grid. The tiles should have Humidity Resistance
(RH) of 99%,NRC 0.6, Light Reflectance 85%, Thermal
Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire
Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module
size of 600 x 600 x 16mm , with Recycled content of 31 %. The
tile shall be laid on precoated G.I channel height of 32 with 15
mm wide T - section flanges colour white having rotary stitching
and XL2 CLIP on all T sections i.e. the Main Runner, 1200 mm
& 600 mm Cross Tees with a web height of 32mm and a load
carrying capacity of 7.57 Kgs/M2 & pull out stength of
minimum 100 Kgs.. The T Sections have a Galvanizing of 90
grams per M2 and need to be installed with Suspension system
of Armstrong OR equivalent make. The Tile & Grid system used
together should carry a 10 year warranty. product approved in
GRIHA and BS 476 etc. complete.
Report Name: e DSR
per unit) unit)
Doors and 49.01 BDT Providing and fixing frame with / without ventilator of size as As directed by Cubic 105610.00 18000.00
Windows specified with Country cut teak wood for doors and windows Engineer in Meter
including chamfering, rounding, rebating, iron holdfast of size charge.
300mm x 40mm x 5mm with oil painting, etc. complete
Doors and 49.02 BDT Providing and fixing frame with / without ventilator of size as As directed by Cubic 44968.00 22604.00
Windows specified with Country non teak wood for doors and windows Engineer in Meter
including chamfering, rounding, rebating, iron holdfast of size charge.
300mm x 40mm x 5mm with oil painting, etc. complete.
Doors and 49.03 BDT 4 Providing and fixing the Country cut teak wood second class Bd-T-4 Page Square 2676.00 800.00
Windows fully glazed openable fanlight rectangular in shape as per No. 479 Meter
detailed drawing excluding the frame,stainless steel fixtures and
fastenings and finishing the wood work with 3 coats of oil
painting.
Doors and 49.04 BDT 7 & 8 Providing and fixing Country cut teak wood double or single Bd-T-7 & 8 Square 5400.00 1689.00
Windows leaf second class fully panelled door shutter with 35mm thick Page No. 481- Meter
style and rail with 25 mm thick panels with openable fan light as 82
per detailed drawings. Excluding the door frame 60mm x
100mm stainless steel fixtures and fastening and finishing the
wood work with oil painting 3 coats.
Doors and 49.05 BDT 11 Providing and fixing Country cut teak wood single leaf panelled As directed by Square 3033.00 956.00
Windows door shutter without fanlight and 25mm thick as per drawing Engineer in Meter
consisting of Ghana T.W. top rail size 100mm x 25mm and charge.
bottom lock rail 200mm x 25mm insert pannel 12 mm thick
commercial ply faced T.W. particle board with phenol
formaldehyde synthetic resin (Generally confirming to ISI 3097)
excluding frame, including stainless steel fixture and fastening
and T.W. beading to junctions of panelled inserts and as
instructed by the Engineer in charge including 3 coats of oil
painting etc. complete.
Doors and 49.06 BDT 11 Providing and fixing single leaf panelled door shutter without As directed by Square 4561.00 1553.00
Windows fanlight and shutter 35 mm thick as per drawing consisting of Engineer in Meter
Ghana T.W. top rail size 100mm x 35 mm and bottom and lock charge.
rail 200mm x 35mm insert panel 12 mm thick commercial ply
faced T.W. particle board with phenol formaldehyde synthetic
resin (Generally confirming to ISI 3097) excluding frame,
including stainless steel fixtures fastening and T.W. beading at
junction of panels inserts and as instructed by the Engineer in
charge including 3 coats of oil painting etc. complete.
Doors and 49.07 BDT 11 Providing and fixing single or double leaf panelled door shutter As directed by Square 3327.00 831.00
Windows excluding frame with glazed openable fanlight shutter 35 mm Engineer in Meter
thick as per detailed drawing consistingpanelled vertical styles charge.
100 mm x 35 mm and lock and bottom rail 200 mm x 35 mm
and panels 12 mm thick both side commercial ply faced particle
board including stainless steel fixtures and fastening and T.W.
beading at junctions of panel inserts and as instructed by the
Engineer in charge including 3 coats of oil painting etc.
complete.
Doors and 49.08 BDT 12 Providing and fixing Country cut teak wood double or single Bd-T-11 & 12, Square 4530.00 1670.00
Windows leaf panelled shutters, 35 mm thick style and rail and 25 mm Page No. 482- Meter
thick panels without ventilator as per detailed drawing excluding 483
the door frame, stainless steel fixtures and fastening and
finishing the wood work with oil painting 3 coats complete
per unit) unit)
Doors and 49.09 BDT 34 Providing and fixing solid core flush door shutter in single leaf Bd-T-34, Page Square 2333.00 246.00
Windows 32 mm thick decorative type of exterior grade as per detailed No. 499 Meter
drawings approved face veneers 3 mm thick on both faces or as
directed, all necessary beads, mouldings and lipping, wrought
iron hold fasts, chromium plated fixtures and fastenings, with
brass mortise lock, chromium plated handles on both sides, and
finishing with French Polish etc. complete.
Doors and 49.01 BDT 36 Providing and fixing solid core flush door shutter commercial in Bd-T-36, Page Square 1612.00 423.00
Windows single leaf 32 mm thick without ventilator commercial type of No. 500 Meter
exterior grade as per detailed drawings with wrought iron hold
fast, stainless steel fixtures and fastenings and handles on both
sides and finishing with oil painting 3 coats complete.
Doors and 49.11 BDT Providing and fixing solid core flush door commercial type on As directed by Square 1948.00 442.00
Windows single leaf 16 mm thick Bison Panel cement bonded particle Engineer in Meter
Board including Teak wood lipping beading on all four edges charge.
without ventilator commercial type of exterior grade as per
detailed drawings with wrought iron hold fast,stainless steel
fixtures and fastenings and handles on both sides and finishing
with oil painting three coats complete.
Doors and 49.12 BDT 39 Providing and fixing Country cut teak wood single leaf door Bd-T-39, Page Square 2972.00 398.00
Windows shutter with teak wood style and rail of 25 mm thick including No. 500 Meter
fixing 50 mm x 25 mm size welded mesh of 10 gauge as per
detailed drawing or as directed with stainless steel fixture and
fastening finishing with 3 coats of oil painting etc. complete.
Doors and 49.13 BDT Providing and fixing factory made panelled door shutter in As directed by Square 1552.00 274.00
Windows single leaf 35 mm thick style and rail without ventilator with Engineer in Meter
CCTW panels 12 mm thick including wrought iron hold fast and charge.
stainless steel fixtures with oil painting 3 coats etc. complete.
Doors and 49.14 BDT Providing and fixing Country cut teak wood single leaf panelled As directed by Square 2735.00 578.00
Windows door shutters 35 mm thick style and rail and 19 mm thick Ghana Engineer in Meter
T.W. panels as per detailed drawing including wrought iron hold charge.
fast stainless steel fixtures and fastening and three coats of oil
painting etc. complete.
Doors and 49.15 BDT 42 Providing and fixing fully glazed double leaf window shutter Bd-T-42, Page Square 2390.00 813.00
Windows with openable fanlight including Country cut teak wood 25 mm No. 503 Meter
thick style and rails with plain / obscured glass panels as per
drawing or as directed by the Engineer in charge with stainless
steel fixtures and fastening and finishing the wood work with oil
painting three coats etc. complete.
Doors and 49.16 BDT 42 Providing and fixing Country cut teak wood window with Bd-T-42, Page Square 2771.00 731.00
Windows double leaf half glazed and half panelled shutter with ventilator No. 503 Meter
including wrought iron hold fast, stainless steel fixtures and
fastenings and finishing the wood work with oil painting 3 coats
etc. complete.
Doors and 49.17 BDT 43 Providing and fixing Country cut teak wood windows with Bd-T-43, Page Square 3441.00 553.00
Windows double leaf 25 mm thick planked shutters without ventilators as No. 503 Meter
per detailed drawings including stainless steel fixtures and
fastenings and finishing the wood work with oil painting 3 coats
etc. complete
Doors and 49.18 BDT 43 Providing and fixing Country cut teak wood windows / Bd-T-43, Page Square 3945.00 646.00
Windows ventilators with double leaf panelled shutters 25 mm thick No. 503 Meter
without ventilators as per detailed drawing including stainless
steel fixtures and fastenings and finishing the wood work with
oil painting 3 coats etc. complete.
Doors and 49.19 BDT 53 Providing and fixing steel window of various sizes as per Bd-T-53, Page Square 2475.00 225.00
Windows detailed drawing without hot dip zinc coating, without No. 509 Meter
ventilators, including fabricating / glazing with plain / obscured
glass panels of approved type and quality, iron oxidised fixtures
and fastenings, oil painting two coats complete.
per unit) unit)
Doors and 49.20 BDT 53 Providing and fixing steel window of various sizes as per Bd-T-53, Page Square 2893.00 385.00
Windows detailed drawing without hot dip zinc coating, without No. 509 Meter
ventilators, including fabricating / glazing with plain / obscured
glass panels of approved type and quality, iron oxidised fixtures
and fastenings, finishing with oil painting two coats complete
(with guard bars 12 mm square at 10 cm c/c.)
Doors and 49.21 BDT Providing and fixing steel window C.R.C. sheet as per I.S. 1513 As directed by Square 2278.00 530.00
Windows : 1986. gauge sect. 65 x 40 x 25 mm shutter single sheet of 24 Engineer in Meter
gauge single leaf joined by fusion welding at appropriate points charge.
with vertical grooves of 15 mm wide and 15 mm deep at a
distance of 45 mm. The first and last rib should be 60 mm away
from vertical edge of the shutter. the shutter shall be welded,
with angle to from the periphery of the shutter. At the center of
the frame there shall be angle welded to bifurcate the frame into
segments with two leaf shutter square 12 mm square guard bars
at 120 mm center with all accessories
Doors and 49.22 BDT Providing and fixing in position factory made box type steel As directed by Square NA NA
Windows window with glazed fanlight including steel windows of cold Engineer in Meter
rolled section of 105mm x 60mm x 1.25mm thick frame section charge
filled with cement concrete (1:2:4) and metal pressed steel
shutters of 20 gauge (1mm) as per detailed drawing and design
or as directed including providing horizontal mild steel 12mm
square bars at 10cm center to center, required F-7B section,
section 7-6, section 20mm x 5mm mild steel flat for shutter and
F4B section for frame, 3mm thick glass of approved quality for
fanlight necessary fixtures and fastening etc. complete finishing
with one coat of anti-corrosive paint etc.complete
Doors and 49.23 BDT Providing and fixing in position factory made box type fully As directed by Square NA NA
Windows glazed window consisting of cold rolled section of 105mm x Engineer in Meter
60mm x 1.25mm thick frame section filled with cement concrete charge
(1:2:4) and steel section F4B as per detailed drawing and design
including mild steel 12mm square bars at 10cm center to center,
required F-7B section, section T-6, section for shutter frame
(Louvered clips in case of Louvered window portion) and 3mm
thick glass of approved quality of necessary fixtures and
fastening, finishing with one coat of anti-corrosive paint etc.
complete .
Doors and 49.24 BDT 55 Providing and fixing rolling shutter fabricated from steel laths of Bd.T.55, Page Square 2350.00 225.00
Windows minimum thickness 0.9 mm with lock plate of 3.15 mm No. 510 Meter
thickness reinforced with 35 x 35 x 5 mm angle section fitted
with sliding bolts and handles for both sides, deep M.S. channel
section of depth and thickness not less than 65 mm and 3.15 mm
respectively with hold fast arrangements, M.S. Bracket plate 300
x 300 x 3.15 mm minimum size and shape with square bar,
suspension shaft of minimum 32 mm diameter, hood cover of
M.S. sheet not less than 0.9 mm thickness and of any size at top
and safety devices including mechanical gear operation
arrangement consisting of worm gear wheels and worms of high
grade cast iron or mild steel and one coat of red lead primer etc.
complete. (I.S. 6248-1979) (Without mechanical gear)
per unit) unit)
Doors and 49.25 BDT 55 Providing and fixing rolling shutter fabricated from steel laths of Bd.T.55, Page Square 2600.00 250.00
Windows minimum thickness 0.9 mm with lock plate of 3.15 mm No. 510 Meter
thickness reinforced with 35 x 35 x 5 mm angle section fitted
with sliding bolts and handles for both sides, deep M.S. channel
section of depth and thickness not less than 65 mm and 3.15 mm
respectively with hold fast arrangements, M.S. Bracket plate 300
x 300 x 3.15 mm minimum size and shape with square bar,
suspension shaft of minimum 32 mm diameter, hood cover of
M.S. sheet not less than 0.9 mm thickness and of any size at top
and safety devices including mechanical gear operation
arrangement consisting of worm gear wheels and worms of high
grade cast iron or mild steel and one coat of red lead primer etc.
complete. (I.S. 6248-1979) (With mechanical gear)
Doors and 49.26 BDT 57 Providing and fixing collapsible steel gate in one / two leaves Bd.T.57, Page Square 2923.00 600.00
Windows with hot rolled vertical channels of 18 x 9 x 3 mm minimum No. 511 Meter
size, crossings of M.S. flats of size 18 x 5 mm T or E section for
runner of minimum 40 x 6 mm size for flange, M.S. flat for top
runner of minimum size 40 x 12 mm with roller wheels
confirming to grade F.G. 150 fitted with snap headed rivets of
minimum size 6 mm max. spacing of vertical channels be 100
mm enclosed gate position and clear space of 150 mm between
two sets of crossings with hold fasts, stoppers, spaces, handles,
locking arrangement and one coat of red lead primer & oil
painting etc. complete. (I.S. 10521-1983).
Doors and 49.27 BDT 67 Providing and fixing partition of welded mesh of 3 mm dia. Bd-T-67, Page Square 1521.00 550.00
Windows wires 50 mm x 25 mm size mesh including integrated non teak No. 515 Meter
seasoned wood frame 80 x 50 mm of vertical and horizontal
scantling and finishing with oil painting 3 coats etc. complete
Doors and 49.28 BDS Providing and fixing sheet glass of 24 oz. for all size including Bd.S . Page Square 583.00 76.00
Windows putty etc. complete No. 465 to 467 Meter
Doors and 49.29 BDT 53 Providing and fixing steel ventilator fully glazed partly fixed as Bd. T. 53, Square 2105.00 378.00
Windows per detailed drawing without hot dip zinc coating including Page No. 509 Meter
fabricating glazing with plain / obscured glass panes and & As directed
approved type and quality and iron oxidized fixtures and by Engineer in
fastening oil paint 2 coats etc. complete. charge.
Doors and 49.30 BDT 53 Providing and fixing steel ventilator fully glazed partly fixed as Bd. T. 53, Square 2914.00 583.00
Windows per detailed drawing with hot dip zinc coating including Page No. 509 Meter
fabricating glazing with plain / obscured glass pans and and As
approved type quality and iron oxidized fixtures and fastening directed by
with guard square bars 12 mm 10 cm c/c and oil painting 2 Engineer in
coats etc. complete. charge.
Doors and 49.31 BDT Providing and fixing M.S. grill door 24 kg/sqm of various size As directed by Square 2120.00 300.00
Windows as per detailed drawings without hot dip coating, iron fixtures Engineer in Meter
and fastenings and 3 coats of oil painting etc charge.
Doors and 49.32 BDT Providing and fixing CCTW beading of size 40 mm x 20 mm to As directed by Running 111.00 36.00
Windows the door frame of size 60 mm x 100 mm / 110 mm including Engineer in Meter
chamfering finishing with 3 coats of oil painting etc. complete charge.
Doors and 49.33 BDT Providing and fixing steel frame of angle 50 x 50 x 6 mm size As directed by Square 1714.00 357.00
Windows for window with 16 mm with mild steel bars horizontally at 10 Engineer in Meter
cm c/c for ventilator portion and at 15 cm c/c for remaining charge.
portion with M.S. flat of size 40 x 6 mm vertical at center
including iron hold fast boxes for fixing 40 x 6 mm vertical at
center including iron hold fast boxes for fixing 40 x 6 mm
vertical at center including iron hold fast boxes for fixing
shutters including welding finishing painting etc. complete.
per unit) unit)
Doors and 49.34 BDT Providing and fixing steel frame of angle 40 x 40 x 5 mm size As directed by Square 1320.00 308.00
Windows for windows with 16 mm dia. mild steel bars horizontally at 10 Engineer in Meter
cm c/c for ventilator portion and 15 cm c/c for remaining portion charge
with M.S. flat of size 40 x 6 mm vertical at center including iron
hold fast boxes for fixing 40 x 6 mm vertical at center including
iron hold fast boxes for fixing shutters including welding
finishing painting etc. complete.
Doors and 49.35 BDT Providing and fixing steel frame door of angle 50 x 50 x 6 mm As directed by Square 910.00 200.00
Windows with mild steel bars 16 mm dia. horizontally at 10mm c/c for Engineer in Meter
ventilator portion including iron hold fast boxes for fixing charge.
shutters including welding, finishing, painting etc. complete.
Doors and 49.36 BDT Providing and fixing steel frame door of angle 40 x 40 x 5 mm As directed by Square 831.00 284.00
Windows with 16 mm dia. mild steel bars horizontally at 10cm c/c for Engineer in Meter
ventilator portion including iron hold fast for the fixing shutters charge.
including welding, painting, finishing etc. complete.
Doors and 49.37 BDT Providing and fixing in position. (as per I.S.1868 / 1982) As directed by Square 4211.00 770.00
Windows Aluminium sliding window of two tracks with rectangular pipe Engineer-in- Meter
having overall dimension 63.50 x 38.10 x 1.02 mm at weight charge.
0.547 kg/Rmt. and window frame bottom track section 61.85 x
31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track
section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The
shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight
0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight
0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight
0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight
0.417 kg/Rmt. As per detailed drawings and as directed by
Engineer in charge with all necessary Aluminium sections
fixtures and fastenings such as roller bearing in nylon casting
and self locking catch fitted in vertical section of shutter
including 5 mm thick plain glass with all required screws and
nuts etc, complete. With colour Anodising with
box.
Windows Aluminium sliding window of two tracks with rectangular pipe engineer-in- Meter
nuts etc, complete. With colour Anodising without
box
per unit) unit)
nuts etc, complete. With powder coating with box
having overall dimension ?63.50 x 38.10 x 1.02 mm at weight charge.
nuts etc, complete. With powder coating without box
Doors and 49.41 BDT Providing and fixing in position (as per 1868 / 1982) As directed by Square 3970.00 800.00
Windows Alluminium sliding window of three tracks with rectangular engineer-in- Meter
pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with charge.
window frame bottom track section 92 x 31.75 x 1.30 mm at
weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x
1.30 mm at weight 0.933 kg/Rmt. The shutter should be of
bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter
locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and
handle and top section 40 x 18 x 1.25 mm at weight o.417
kg/Rmt. As per detailed drawings and as directed by Engineer-in-
charge with all necessary Aluminium sections fixtures and
fastenings such as roller bearing in nylon casting and self
locking catch fitted in vertical section of shutter including 5 mm
thick plain glass and aluminium mosquito net shutter with
stainless steel jail with all required screws and nuts etc,
complete.
With colour Anodising with box
per unit) unit)
Doors and 49.42 BDT Providing and fixing in position (as per 1868 / 1982) Aluminium As directed by Square 3515.00 1530.00
Windows sliding window of three tracks with rectangular pipe 95 x 38.10 engineer-in- Meter
x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom charge.
track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt..
Top and side track section 92 x 31.75 x 1.30 mm at weight
0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18
x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18
x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section
40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed
drawings and as directed by Engineer-in-charge with all
necessary Aluminium sections fixtures and fastenings such as
roller bearing in nylon casting and self locking catch fitted in
vertical section of shutter including 5 mm thick plain glass and
aluminium mosquito net shutter with stainless steel jail with all
required screws and nuts etc, complete.
With colour Anodising without box
With powder coating with box
With powder coating without box
Doors and 49.45 0 Supplying and fixing in position Aluminium extruded section As Directed by Square NA NA
Windows Four track sliding windows upto 1.2 metre height, outer frame Engneer- Meter
made from section of over all size 80 mm x 45 mm, bottom In_Charge
section with or without drain section, track weighing 0.90 kg per
metre and top and side section weighing 0.838 kg per running
metre with shutter or sections made of 19 mm x 40 mm size
having average weight of 0.6 kg per running metre(or as
required size) with change in proportionate weight,with 5.00
mm selected quality plain sheet glass fixed with new neoprene
gasket shutters to be provided with nylon encased stainless
rollers, necessary locks and handles complete. (As per
Architect's drawing no.Job No. T- MISC/5000 Drg.No.22 dated
3.2.1992).
per unit) unit)
Doors and 49.46 0 Providing & fixing of approved make PVC Louvered /fixed As directed Square NA NA
Windows Glazed window / ventilator frame fabricated out of rigid PVC by Engineer-in- Meter
hollow section of size 48mm x 40 mm with concealed solid charge.
polymeric reinforcement shall have mitre cut and fixed with the
help of 100mm long full threaded metal screws in PVC roll
plugs inserted in wall as hold fast. The snap fit glazing bid of
size 19mm x 19.5mm shall be fixed alongwith outer frame for
fixing the 5mm thick clear vision glass panel or louvered.
Necessary hardware such as rubber gasket, louvered glass
holding clip shall be fixied at required junction etc. complete.
Doors and 49.47 BDT Providing and Fixing 30 MM thick '' FACTORY MADE BOTH As directed by Square 3387.00 170.00
Windows SIDE PRELAMINATED SOLID PANEL PVC DOOR Engineer in Meter
SHUTTER manufactured by M/S RAJSHRI equivalent charge.
consisting of frame made out of M.S tubes of 19 guage
thickness and, size 19 x 19 mm for styles and 15 x15 mm for the
top and bottom rails,M.S frame shall have a coat of metel primer
of approved make and manufacture .M.S frame shall be covered
with heat mouled PVC ' C ' channel made from 5 mm (+/- 0.25)
thick prelaminated sheet of density 600 kg/cbm ,of size 30mm
thickness 70mm width out of which 50mm shall be flat and
20mm shall be tapered in 45? angle on either side forming stiles
; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm
shall be falt and 20 mm shall be tapered in 45? on the inner side
to form top and bottom rail and 115 mm wide PVC sheet out of
which 75 mm shall be falt and 20 mm shall be tapered on both
sides to form lock rail.Top,bottom and lock rail shall be
provided either side of the panel. An additional 5 mm (+/- 0.25)
thick PVC strip of 20 mm width is to be stuck on the bottom
side of the ' c ' channel prelaminated paneling of 5 mm (+/- 0.25)
thick PVC sheet to be fitted inside the M.S. frame welded/
sealed to the styles and rails with 5 mm (+/- 0.25) x 30 mm
Doors and 49.48 BDT Providing and fixing Rajshri brand or equivalent factory made As directed by Square 4960.00 725.00
Windows 34 mm thick moulded door shutter consisting of solid core single Engineer in Meter
leaf flush door of 30 mm thickness lipped with 15 mm ( 5mm x charge.
3) thick x 30 mm width on one style and top rail and 10 mm
(5mm x 2) thick x 30 mm width on other style and bottom rails.
The inner panels laminated with 2 mm thick termite proof, water
proof and fire resistant moulded PVC sheet with 2,4,6 design in
different plain and /or prelim colours on one side after routing
the moulded design on flush doors and 2 mm plain and /or pre
lam PVC on other side using rubber adhesive on flush door and
solvent cement adhesive on the PVC lipping etc. as per direction
of Engineer in charge and manufacturers specification and
Doors and 49.49 BDT Providing and fixing cold rolled steel hollow door frame 105mm As directed by Number 849.00 204.00
Windows x 60mm for anysizes including hold fast hinges, tie members Engineer in
with red oxide and gray paint etc. complete as per I.S.I. charge.
specifications and code of practice prescribed including
anticorrosive treatment as directed by the engineer.
Doors and 49.50 BDT Providing and fixing in position aluminium openable window of As directed by Square 4227.00 520.00
Windows any size as per detailed drawing and as directed by Engineer in Engineer in Meter
charge with all necessary aluminum sections including necessary charge.
fixtures and fastening with 5 mm thick clear float glass etc.
complete.
a) Without powder coating
Note - While arriving at the rate of item of item weight at 6.90
kg/Sqm is considered.
Doors and 49.51 BDT Providing and fixing in position aluminium openable window of As directed by Square 4759.00 518.00
Windows any size as per detailed drawing and as directed by Engineer-in- Engineer in Meter
charge with all necessary alluminium sections including charge.
necessary fixtures and fastening with 5 mm thick clear float
glass etc. complete.
b) With powder coating
per unit) unit)
Doors and 49.52 BDT Providing and fixing in position aluminium fixed window fully As directed by Square 3213.00 556.00
Windows glazed of any size as per detailed drawing and as directed by Engineer in Meter
Engineer-in-charge with all necessary alluminium sections charge.
including necessary fixtures and fastening such as 5 mm thick
clear float glass etc. complete.
a) Without powder coating.
Doors and 49.53 BDT Providing and fixing in position aluminium fixed window fully As directed by Square 3590.00 551.00
Windows glazed of any size as per detailed drawing and as directed by Engineer in Meter
Engineer-in-charge with all necessary alluminium sections charge.
including necessary fixtures and fastening such as 5 mm thick
clear float glass etc. complete.
Doors and 49.54 BDT Providing and fixing in position aluminium partly openable and As directed by Square 3979.00 578.00
Windows partly fixed window of any size as per detailed drawing and as Engineer in Meter
directed by Engineer-in-charge with all necessary alluminium charge.
sections including necessary fixtures and fastening with 5 mm
thick float glass etc. complete.
a) Without powder coating
Doors and 49.55 BDT Providing and fixing in position aluminium partly openable and As directed by Square 4177.00 575.00
Windows partly fixed window of any size as per detailed drawing and as Engineer in Meter
directed by Engineer-in-charge with all necessary alluminium charge.
sections including necessary fixtures and fastening with 5 mm
thick float glass etc. complete.
Doors and 49.56 BDT Providing and fixing M-40 grade thick vibrated pull cast or As directed by Running 658.00 100.00
Windows similar type concrete frame with chamfer conforming to I.S. engineer-in- Meter
6524-1983 having 6 mm dia. bars 3 Nos. And stirrups @250 charge.
mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia
bars 500 mm long including primer and oil painting etc,
complete) frame size 60 mm x 100 mm .
Doors and 49.57 BDT Providing and fixing M-40 grade thick vibrated pull cast or As directed by Running 692.00 208.00
Windows similar type concrete frame with chamfer conforming to I.S. engineer-in- Meter
6524-1983 having 6 mm dia bars 3 Nos. And strips @250 mm charge.
c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars
500 mm long including primer and oil painting etc, complete)
frame size 60 mm x 125 mm
Doors and 49.58 BDT Providing and fixing fiber glass reinforced polyster door shutter As directed by Square 3111.00 298.00
Windows 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without engineer-in- Meter
ventilator including chromium plated fixtures and fastening with charge.
chromium plated handles on both sides, etc complete.
Doors and 49.59 BDT Providing and fixing fiber glass reinforced polyster door shutter As directed by Square 4114.00 298.00
Windows 35 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without engineer-in- Meter
ventilator including chromium plated fixtures and fastening with charge.
chromium plated handles on both sides, etc complete.
Doors and 49.60 BDT Providing and fixing acrylic plastic sheet panels of approved As directed by Square NA NA
Windows quality in required thickness plain clear or any colour or engineer-in- Meter
obscured linings in lieu of glass pans to doors/windows charge.
including providing and fixing clips, putty etc. complete. (a)
2.00 mm thick.
Doors and 49.61 BDT Providing and fixing acrylic plastic sheet panels of approved As directed by Square NA NA
Windows quality in required thickness plain clear or any colour or engineer-in- Meter
obscured linings in lieu of glass pans to doors/windows charge.
including providing and fixing clips, putty etc. complete. (b)
3.00 mm thick.
per unit) unit)
Doors and 49.62 BDT Providing and fixing 24 gauge plain aluminium sheet on the face As directed by Square 535.00 100.00
Windows of door shutter including cutting to required size and fixing the Engineer in Meter
screws including making good the damages if any to existing charge.
door shutter and frame etc. complete as directed or as per
detailed drawing
Doors and 49.63 BDT Providing and fixing in position, Double shuttered aluminium As directed by Square 15460.00 550.00
Windows extruded powder coated openable door of specified size with Engineer in Meter
aluminium door frame of powder coated section 101.60 x charge.
44.75mm , 3.18 mm thick and shutter comprising of powder
coated section having bottom and lock rail of size 150 mm x
44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm
thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for
shutter plain glass panes 5 mm thick for top panels and 12mm
thick both side laminated phenol bonded particle board panels
for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor
spring of 150 kg capacity , having heavy duty concealed lock,
necessary beading, glazing clips, PVC gaskets, 250mm length
aluminium tower bolts, 150mm dia. pad handle, etc. as per
detailed design and drawing or as directed by engineer in charge
including all materials , labours, and equipment etc.complete
Doors and 49.64 BDT Providing and fixing in position, Single shuttered aluminium As directed by Square 12160.00 500.00
Windows extruded powder coated openable door of overall size 0.90 m x Engineer in Meter
2.40 m with aluminium door frame of powder coated section charge.
101.60 x 44.75mm , 3.18 mm thick and shutter comprising of
powder coated section having bottom and lock rail of size 150
mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x
3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick
and for shutter plain glass panes 5 mm thick for top panels and
12mm thick both side laminated phenol bonded particle board
panels for bottom panels etc. , I.S.I. mark , heavy duty,
Hydraulic floor spring of 150 kg capacity , having heavy duty
concealed lock, necessary beading, glazing clips, PVC gaskets,
250mm length tower bolts, 150mm diam. pad handle, etc. as per
detailed design and drawing or as directed by engineer in charge
including all materials , labours, and equipment etc.Complete
Doors and 49.65 BDT Providing and fixing in position, Single shuttered aluminium As directed by Square 10150.00 1870.00
Windows extruded powder coated openable door of overall size 0.90 m x Engineer in Meter
2.40 m with aluminium door frame of powder coated section charge.
101.60 x 44.75mm , 3.18 mm thick and shutter comprising of
powder coated section having bottom and lock rail of size 150
mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x
3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick
and for shutter plain glass panes 5 mm thick for top panels and
12mm thick both side laminated phenol bonded particle board
panels for bottom panels etc. , I.S.I. mark , with bijagiri having
heavy duty concealed lock, necessary beading, glazing clips,
PVC gaskets, 250mm length tower bolts, 150mm diam. pad
handle, etc. as per detailed design and drawing or as directed by
engineer in charge including all materials , labours, and
equipment etc.Complete
Doors and 49.66 BDT Providing and fixing 50 mm x 50 mm Mild Steel square pipe As directed by Square 2470.00 250.00
Windows framed steel windows of various sizes as per details with welded Engineer in Meter
square bars 12 mm at 10 cm center to center without hot dip zinc charge.
coating without / with ventilator including fabrication, glazing
with plain / obscured glass panes of approved type and quality,
all fixtures and fastenings and finishing with one coat of primer
complete.
Doors and 49.67 0 Providing and fixing decorative grill of various sizes as per As directed by Square NA NA
Windows detail drawing and specification etc. complete.(Prior permission Engineer in Meter
to be obtained from S.E. before execution of this item) charge.
(b) Stainless Steel (Weight @ 15 Kg/Sqm.)
per unit) unit)
Doors and 49.68 BDT Providing and fixing in position powder coated aluminium As directed by Square 2757.00 220.00
Windows louvered windows / ventilator of various sizes with powder Engineer in Meter
coating as per detailed drawing and specifications including charge.
aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick
sheet glass louvers, of approved quality etc. complete.
Doors and 49.69 BDT Providing and fixing partitions made up of CCTW frame of size As directed by Square 4211.00 390.00
Windows 75 mm x 50 mm at 60 cm c/c with 9 mm thick commercial ply Engineer in Meter
and 4mm thick veneer on both sides with French polish etc. charge.
complete.
Doors and 49.70 BDT Providing and fixing Country cut teak wood partly veneered As directed by Square 2340.00 420.00
Windows and partly glazed partition with 75 mm x 50 mm frame at 60 cm Engineer in Meter
center and 9 mm thick commercial ply on both sides, decorative charge.
veneer of 4 mm thick and plain glass 5 mm thick, including
French polishing etc. complete
Doors and 49.71 BDT Providing and fixing welded mesh of 50 mm x 25 mm and (11 As directed by Square 1157.00 48.00
Windows gauge) to Country cut teak wood frame work as per detailed Engineer in Meter
drawing or as directed, iron fastening with one coat of primer, charge.
scaffolding, including TW frame work of 70 mm x 75 mm and
covering CCTW battens of 45 mm x 10 mm etc. complete.
Doors and 49.72 BDT Providng and fixing in position anodised extruded aluminum As directed by Square 2591.00 460.00
Windows partitions, partly glazed and partly laminated having frame made Engineer in Meter
out of extruded tubular section of size 40 mm x 60 mm with 12 charge.
mm thick three layered flat pressed teak wood particle board
bonded with BWP type exterior grade phenol formaldehyde
synthetic resin conforming to IS 12823-1990, laminated on both
sides,Novateakor equivalent and 5 mm thick selected quality
plain/ float glass panels fixed with aluminum glass clips 12 mm
x 12 mm and rubber cushioning beading to glass partitions as
per approved drawing etc. compete
Doors and 49.73 BDT Providing and fixing in position extruded aluminium partitions As directed by Square 2775.00 500.00
Windows having frame made out of extruded tubular section of size 65 Engineer in Meter
mm x 40 mm with 12 mm thick three layered flat pressed teak charge.
wood particle board bonded with BWP type exterior grade
phenol formaldehyde synthetic resin conforming to IS 12923-
1990, laminated on both sides, Novateak or equivalent with
aluminium glazing clips of size 12 mm x 12 mm (conical) as per
Doors and 49.74 BDT Providing and fixing fly proof mesh shutter to ventilator/window As directed by Square 2230.00 315.00
Windows using CCTW members of size 45 x 22 mm for frame work and Engineer in Meter
35 x 22 mm for middle support and fixing fly proof mesh on it charge.
and covering Ghana TW battens of size 20 x 10 mm including
priming and two coats of oil painting to the new wood and steel
work and all labour charges including all fixture and fastenings
etc. complete
Doors and 49.75 BDT Providing coloured anodising treatment to aluminium sections of As directed by Square 965.00 65.00
Windows the doors , windows, and ventilators including all the Engineer in Meter
intermediate supports , side supports, screws and all the charge.
necessary fixtures with all leads, lifts, fixing charges etc.
complete ( Complete measurement on actual square meter basis
of opening area shall be paid.)
Doors and 49.76 BDT Providing and fixing aluminium grill diamond mesh type DG- As directed by Square 3764.00 915.00
Windows 202 of 7.5 mm thick including fixing in position anodised Engineer in Meter
aluminium frame section of 80 x 38 mm x 1.22 mm size box, charge.
cutting to the required size with all wastage , labour, lead lift etc.
complete.
Doors and 49.77 BDT Providing and fixing in position Mild steel fixed staggered As directed by Square 1925.00 400.00
Windows ( Z Type ) Ventilator as per detailed drawing with hot deep zink Engineer Meter
coating including fabricating with Mild steel 'Z 'Section of size Incharge
20mm x 25 mm and 3 mm thick at weight 1.42 Kg/Rmt,with
stainless steel mosquito net of 304 Grade,4 mm thick float glass
?as directed by Engineer In charge including necessary welding
,grinding, two coats of oil paint etc.complete
per unit) unit)
Doors and 49.78 BDT Providing and fixing in position anodised (as per IS 1868/1982) As directed by Square 2992.00 300.00
Windows Aluminium fixed staggered ( Z Type )Ventilator with aluminium Engineer Meter
rectangular pipe 63 mm x 38.10 mm x 1.22 mm at weight 0.650 Incharge
Kg/Rmt, Aluminium angle of size 15 mm x 15 mm x 1
mm,aluminium channel of 9 mm sizes, S.S.mosquito net of 304
Grade,4 mm thick float glass per detailed drawing & as directed
by Engineer in charge etc.complete.
Doors and 49.79 BDT Providing and fixing welded mesh of 11 gauge wires having As directed by Square 1550.00 528.00
Windows mesh size 50 mm x 25 mm including M.S Angle frame of size Engineer Meter
35 mm x 35 mm x5 mm in position with oil painting 3 coats etc. Incharge
complete
Doors and 49.80 BDT Providing & Fixing 32 mm thick One piece single moulded puff As directed by Square 2682.00 1061.00
Windows ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for Engineer Meter
internal use including toilets made up of outer ABS sheet of 1.2 Incharge
mm thick having puff insulation of 35 to 40 Kg/Cum.density
and 10 mm dia.for steel bars 2 Nos., wooden block to receive
fixtures, having M.S. hinges 100 mm length, M.S. handles 150
mm length and 10 mm dia sliding door bolt etc. complete
Doors and 49.81 Bd-T Providing and fixing 30mm thick RAJSHRI or equivalent As Directed Square 4863.00 585.00
Windows BRAND FACTORY MADE SOLID PANEL PVC INTERNAL By Engineer Meter
DOOR SHUTTER consisting of frame made out of M.S. tubes Incharge
of 19 gauge thickness and size of 40mm x 20mm for stiles ,top,
lock & bottom rails. M.S. frame shall have a coat of steel
primers of approved make and manufacture. M.S. frame shall be
covered with 5mm thick heat molded Rajshri PVC C channel of
size 30 x 100mm forming stiles, and 5mm thick, 125mm wide
PVC sheets for top rail, lock rail & bottom rail on either side,
and 15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap
insert for top rail & bottom rail. Paneling of 10 mm thick prelam
PVC sheet to be fitted in the M.S. frame welded / sealed to the
stiles & rails with 30mm wide x 5mm thick PVC sheet beading
on either side, and joined together with solvent cement adhesive
etc. An additional 5mm thick PVC strip of 20mm width is to be
stuck on the interior side of the C Channel using PVC solvent
cement adhesive. including stainless steel fixtures and fastening
Complete as per direction of Engineer-in-charge, manufacturer's
specification & drawing.
Doors and 49.82 Bd-T Providing and fixing 30mm thick RAJSHRI or equivalent As Directed by Square 4760.00 585.00
Windows BRAND FACTORY MADE PVC FLUSH L DOOR SHUTTER Engineer-in- Meter
consisting of panel of hollow PVC profile of 20 mm thickness charge
consisting frame made out of M.S. tubes of 19 gauge thickness
and size of 19mm x 19mminserted inside the hollow section of
stiles rails top ?and bottom rails and two 19x 19 mm MS tubes
inserted horizontally inside the hollow profile section using 4/5
mm sheet using screws hollow profile shall be lipped with 10
mm ( 5mm x2) thick x 20 mm width on stiles and rails using
solvent cement. The inner panel shall be laminated with 5mm
thick termite proof waterproof plain /prelam PVC sheet using
solvent cement on the both sides of the panel including stainless
steel fixtures and fastening etc. Complete as per direction of
Engineer-in-charge, manufacturers specification & drawing.
Doors and 49.83 BDT Providing and fixing partition 4 mm thick Indian teak Veneer on As directed by Square NA NA
Windows one side and 4mm commercial type plywood on the other side Engineer Meter
including C.T.W. frame of 70 x 35 mm at 60 cm C/C on both Incharge
ways, including finishing with French polishing to Veneer face
and oil painting / french polishing to other face
etc.complete.(without skirting)
per unit) unit)
Doors and 49.84 BDT Providing and fixing partitions with 12 mm thick three layered Bd.T. 63/Page Square NA NA
Windows flat pressed teakwood particle board both faces commercial No.514 Meter
bonded with phenol formal dehyde synthetic resin including
CTW vertical 70 x 70 mm and top and bottom rail of 70 x 35
mm and covering batten of 20 x 10 mm at 1.00 metre apart on
both ways or as directed including finishing with one coat of
primer complete.
Doors and 49.85 BDT Providing and fixing partitions with 12 mm thick three layerd Bd.T. 63/Page Square NA NA
Windows flat pressed teakwood commercial board compressed one face No.518 Meter
and other teak veneer bonded with phenol formaldehyde
synthetic resin including CTW vertical 70 x 70 mm and top and
bottom rail of 70 x 35 mm and covering batten of 20 x 10 mm at
1.00 metre apart on both ways or as directed including finishing
with one coat of primer complete.
Doors and 49.86 BDT Providing and fixing partition with 12mm thick three layered Bd.T. 68/Page Square NA NA
Windows flat pressed veneer teak wood partical board with both faces No.520 Meter
teak veneer bonded with phenol formaldehyde synthetic resin
including C.T.W. vertical 70 x 70 mm and top and bottom rail of
70 x 35 mm and covering battern of 20 x 10 mm at 1.00 metre
apart on both ways or as directed including finishing with one
coat of primer complete.
Doors and 49.87 BDT Providing and fixing in position C.C.T.W. brackets for weather As directed by Cum NA NA
Windows sheds of section 70 x 45 mm with mortise and tenon joinery at Engineer
1.2 to 1.5 metre center to center or as directed and teak wood Incharge
battens of required section, including fixing three numbers of
iron nut and bolts to each bracket, necessary scaffolding and two
coats of painting to wood work etc. complete.
Doors and 49.88 BDT Providing and fixing 22 B.W.G. plain galvanised iron sheets on As directed by Square NA NA
Windows top of weather shed, including scaffolding, fixing by means of Engineer Meter
nut and bolts or as directed etc. complete. (Brackets of 70 x 45 Incharge
mm to be paid separately)
Doors and 49.89 BDT Providing and fixing 22 B.W.G. plain FRP sheets on top of As directed by Square NA NA
Windows weather shed, including scaffolding, fixing by means of nut and Engineer Meter
bolts or as directed etc. complete. (Brackets of 70 x 45 mm to be Incharge
paid separately)
Doors and 49.90 BDT Providing and fixing 4 mm thick plain A.C. sheets (of IS std.) on As directed by Square NA NA
Windows top of the weather shed including scaffolding, fixing by means Engineer Meter
of nuts and bolts or as directed etc. complete as per detailed Incharge
drawing (Brackets of 70 x 45 mm to be paid separately).
Doors and 49.91 BDT Providing and fixing UV proof plastic sheet panels of approved As directed by Square NA NA
Windows quality in required thickness of 3 mm plain, clear or any colour Engineer Meter
or obscured (lining) in lieu of glass panels to doors/windows Incharge
including providing and fixing clips, putty etc. complete.
(Sample to be got approved from Ex.Engineer before use)
Doors and 49.92 BDT Providing and fixing country teak wood runner size 150 x 75 As directed by Rmt NA NA
Windows mm over partition, including rounding, fixing in the masonry Engineer
where necessary beading on sides etc. complete. Incharge
Doors and 49.93 BDT Providing and fixing teak wood cover moulding 45 x 20 mm As directed by Rmt NA NA
Windows over doors and windows in the required shape & size as per Engineer
drawing, including all mouldings and finishing with french Incharge
polishing etc. complete.
Doors and 49.94 BDT Providing and fixing aluminium grill`(5.13 Kg/Sqm) decorative As directed by Square NA NA
Windows of various sizes as per detail drawing and specification etc. Engineer Meter
complete. (Prior permission to be obtained from S.E. before Incharge
execution of this item) ( 5.13 Kg/Sqm)
Report Name: e DSR
per unit) unit)
Iron Work 50.01 BDU 1 Providing and fixing mild steel grill work for windows, Bd.U.1 Page Square 1315.00 100.00
ventilators etc. 20 kg/sqm as per drawing including fixtures, No. 537 Meter
necessary welding & painting with one coats of anticorrosive
paint & two coats of oil painting complete.
Iron Work 50.02 BDU 1A Providing and fixing mild steel grill work for windows, Bd.U.1 Page Square 1039.00 102.00
ventilators, etc. 15 kg/sqm as per drawing including fixtures No. 537 Meter
necessary welding and painting with one coat of anticorrosive
paint and two coats of oil painting complete.
Iron Work 50.03 BDU 2 Providing and fixing mild steel grill railing 20 kg/sq.m with Bd.U.2 Page Square 1995.00 160.00
Ghana teak wood hand rail of size 75mm x 60 mm.and sill of No. 537 Meter
75mm.x 25 mm.and newel posts for staircases, including
fabricating, fix-tures, erecting, painting the grill work with one
coat of anti-corrosive paint and two coats of oil painting with
approved colour and polishing the sill, hand rail and the newel
post with french polish.
Iron Work 50.04 BDU 2A Providing and fixing mild steel grill railing 15 kg/sq.m with Bd.U.2 Page Square 1765.00 165.00
Ghanateak wood hand rail of size 75mm x 60 mm and sill of No. 537 Meter
75mm.x 25mm and newel posts for staircases, including
fabricating, fixtures, erecting, painting the grill work with one
coat of anticorrosive paint and two coats of oil painting with
approved colours and polishing the sill, hand rail and the newel
post with french polish.
Iron Work 50.05 BDW Providing and erecting Y type barbed wire fencing with seven As directed by Running 745.00 80.00
rows of wire with 2.45 mm dia G.I. pipe ( Rezan/ concentina ire Engineer in Meter
0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing charge.
supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c
including fixing and fastening with wire, painting M.S. angles
with one coat of red lead primer and two coat of oil paint etc.
complete.
Iron Work 50.06 BDW Providing and fixing 40mm diameter and 1.5mm thick Stainless As directed by Running 1890.00 521.00
steel hand railing in S.S.304 Grade including fabricating Engineer Meter
,fixtures, errecting , necessary welding , grinding , finishing, Incharge
buffing to stainless steel pipe etc. complete
Iron Work 50.07 BDW Providing and fixing 900mm high S.S.304 Grade Stainless steel As directed by Running 4010.00 1208.00
railing with 40mm diameter and 1.5mm thick at top,40mm Engineer Meter
diameter and 1.5mm thick vertical supports spaced at 1.5m Incharge
center to center and 8mm thick toughened glass including
fabricating ,fixtures, errecting , necessary welding , grinding ,
finishing, buffing to stainless steel pipe etc. complete
Iron Work 50.08 BDW Providing and fixing 900mm high S.S.304 Grade Stainless steel As directed by Running 3868.00 1201.00
railing with 40mm diameter and 1.5mm thick at top,40mm Engineer Meter
diameter and 1.5mm thick vertical supports spaced at 3.3m Incharge
center to center and two pipes of 12mm diameter fixed
horizontally including fabricating ,fixtures, errecting , necessary
welding , grinding , finishing, buffing to stainless steel pipe etc.
complete.Note For item no. 58 to 60 prior approval of
Superintending Engineer will be required
Iron Work 50.09 BDW Providing and fixing mild steel grill railing weighing 15 kg / As directed by Square 1765.00 165.00
sqm. with teak wood hand rail of size 75mm.x 60mm. and sill Engineer Meter
75mm.x 25mm.and posts for verandah including fabricating, Incharge
fixtures, erecting and painting the grill work with one coat of
anticorrosive paint and two coats of oil paint and polishing the
grill, hand rail with French polish. Spec. No. : Bd.U.3
per unit) unit)
Iron Work 50.01 BDW Providing and fixing mild steel grill railing weighing 15 kg / As directed by Square NA NA
sqm. with PVC handrail cover and newel post for staircases, Engineer Meter
including fabricating, fixtures, drilling holes in concrete / other Incharge
surface, erecting the grill work, necessary welding, fixing by
nuts and bolts, fixing PVC handrail cover, with one coat of
anticorrosive paint and two coats of oil painting with approved
colour and shade, remaking the damaged surface, cleaning, etc.
complete.
Spec. No. : As directed by Engineer in charge.
Iron Work 50.11 BDW Providing and fixing mild steel grill railing weighing 20 kg / As directed by Square NA NA
sqm. with PVC handrail cover and newel post for staircases, Engineer Meter
including fabricating, fixtures, drilling holes in concrete / other Incharge
surface, erecting the grill work, necessary welding, fixing by
nuts and bolts, fixing PVC handrail cover, with one coat of
anticorrosive paint and two coats of oil painting with approved
colour and shade, remaking the damaged surface, cleaning, etc.
complete.
Spec. No. : As directed by Engineer in charge.
Report Name: e DSR
per unit) unit)
Water 51.01 BDV 1 Providing and laying cast iron pipes of B class of 80mm Bd.V.1 Page Running 852.00 54.00
Supply and diameter with sockets and spigot ends/ flanges and cast No. 547 Meter
Sanitary centrifugally/ vertically including specials, laying pipes and back
Fitting filling the trench complete including excavation.
Water 51.02 BDV 1A Providing and laying cast iron pipes of B class of 100mm Bd.V.1 Page Running 1118.00 54.00
Supply and diameter with sockets and spigot ends/ flanges and cast No. 547 Meter
Sanitary centrifugally/vertically including specials, laying pipes and back
Water 51.03 BDV 1B Providing and laying cast iron pipes of B class of 150mm Bd.V.1 Page Running 1528.00 104.00
Supply and diameter with sockets and spiget ends/ flanges and cast No. 547 Meter
Sanitary centrifugally/ vertically including specials, laying pipes and back
Water 51.04 BDV 2 Providing and making lead joints for 80mm diameter cast iron Bd.V.2 Page Number 267.00 28.00
Supply and pipe line including lead and testing. No. 549
Sanitary
Fitting
Water 51.05 BDV 2A Providing and making lead joints for 100mm diameter cast iron Bd.V.2 Page Number 323.00 28.00
Supply and pipes line including lead and testing. No. 549
Sanitary
Fitting
Water 51.06 BDV 2B Providing and making lead joints for 150mm diameter cast iron Bd.V.2 Page Number 476.00 28.00
Supply and pipe line including lead and testing No. 549
Sanitary
Fitting
Water 51.07 BDV 3 Providing and making flanged connection for the 80mm Bd.V.3 Page Number 91.00 17.00
Supply and diameter cast iron pipe line including painting rubber insertion, No. 550
Sanitary nuts and bolts etc. complete.
Fitting
Water 51.08 BDV 3A Providing and making flanged connection for the 100mm Bd.V.3 Page Number 96.00 17.00
Fitting
Water 51.09 BDV 3B Providing and making flanged connection for the 150mm Bd.V.3 Page Number 133.00 17.00
Fitting
Water 51.01 BDV 5 Providing & fixing on walls/ ceiling/ floors, 15 mm dia. heavy Bd.V.5 Page Running 175.00 46.00
Supply and grade having embossed as ISI Mark galvanised iron pipes No. 551 Meter
Sanitary weight of 1.48 Kg/metre with necessary fittings. remaking good
Fitting the demolished portion and applying primer of anti-corrosive oil
paint 2 coats complete.
Water 51.11 BDV 5 Providing and fixing on walls/ ceiling/ floors 20 mm dia. heavy Bd.V.5 Page Running 211.00 51.00
Supply and grade having embossed as ISI Mark galvanised iron pipes of No. 551c Meter
Sanitary 1.93 kg/meter with necessary fitting remaking good the
Fitting demolished portion and applying primer of anti-corrosive oil
paint, 2 coats complete.
Sanitary weight of 3.01 Kg/meter with necessary fittings . remaking good
paint 2 coats complete.
Sanitary weight of 3.89 Kg/meter with necessary fittings . remaking good
paint 2 coats etc. complete.
Sanitary weight of 4.49 Kg/meter with necessary fittings & remaking
Fitting good the demolished portion and applying primer of anti-
corrosive oil paint 2 coats etc. complete.
per unit) unit)
Water 51.15 BDV 5 Providing & fixing on walls/ ceiling/ floors, 50 mm dia heavy Bd.V.5Page Running 343.00 43.00
Sanitary weight of 6.33 Kg/meter with necessary fittings.& remaking
Fitting good the demolished portion and primer of anti corrossive oil
paint 2 coats etc. complete.
Water 51.16 BDV 5 Providing & fixing on walls/ ceiling/ floors, 80 mm dia.heavy Bd.V.5 Page Running 810.00 46.00
Sanitary weight of 10.15 Kg/meter with necessary fittings. & remaking
Water 51.17 BDV 5 Providing & fixing on walls/ ceiling/ floors, 100 mm dia.heavy Bd.V.5 Page Running 995.00 46.00
Sanitary weight of 14.74 Kg/meter with necessary fittings. & remaking
Water 51.18 BDV 5 Providing and laying in trenches 15 mm dia. medium grade Bd.V.5 Page Running 197.00 33.00
Supply and having embossed as ISI Mark galvanised iron pipes of 1.25 No. 551 Meter
Sanitary kg/meter necessary fitting remaking good the demolished
Fitting portion with filling trenches and with primer of anti-corrosive oil
paint , 2 coats complete.
Supply and having embossed as ISI Mark galvanised iron pipes ?of 1.63 No. 551 Meter
Sanitary kg/meter necessary fitting remaking good the ?demolished
Water 51.21 BDV 5 Providing and laying in trenches 32 mm dia.medium grade Bd.V.5 Page Running 320.00 34.00
Water 51.26 BDV 7 Providing and fixing 15mm diameter water meter with non- Bd.V.7 Page Number 1938.00 102.00
Supply and return valve including strainer, sockets/ union nut including No. 554
Sanitary water meter box making locking arrangement and lock. [Without
Fitting chamber].
Supply and return valve including strainer, sockets/ union nut including No. 554
Sanitary water meter box making locking arrangement and lock. (without
Fitting chamber).
per unit) unit)
Supply and return valve including strainer, sockets/ union nut and including No. 554
Fitting chamber].
Sanitary water meter box making locking arrangements and lock.
Fitting [Withoutchamber].
Sanitary water meter box making locking arrangement and lock. [without
Fitting chamber]
Fitting chamber].
Sanitary water meter box making locking arrangements and lock.
Fitting [Without chamber].
Water 51.33 BDV Providing and fixing 15 mm diameter water meter with non Bd V 6 Page Number NA NA
Supply and return valve with water meter chamber 100 cm. x 50 cm. size of 553.
Sanitary brick work in cement mortar 1:6, 23 cm thick on the bed of
Fitting cement concrete 1:4:8, 15 cm thick with necessary excavation in
all strata, 20 mm cement plaster 1:3 proportion, cast iron frame
and cover and locking arrangement with M.S. flat and locking
including three coats of oil paint of approved quality to cast iron
frame and cover and strainer, testing etc. complete.
per unit) unit)
Water 51.39 BDV Providing and fixing 100mm diameter water meter with non Bd V 6 Page Number NA NA
Water 51.40 BDV 8 Providing and fixing 15 mm dia. screw down bib/ stop tap of Bd.V.8 Page Number 201.00 18.00
Supply and brass including necessary socket union nut complete. No. 554
Sanitary
Fitting
Sanitary
Fitting
Sanitary
Fitting
Water 51.43 BDV 9 Providing and fixing screw down 15 mm dia. wheeled stop tap Bd.V.9 Page Number 220.00 15.00
Supply and of brass including necessary sockets/union nut complete No. 555
Sanitary
Fitting
Water 51.44 BDV 9 Providing and fixing screw down for 20 mm dia. wheeled stop Bd.V.9 Page Number 260.00 14.00
Supply and tap of brass including necessary sockets/union nut complete. No. 555
Sanitary
Fitting
Sanitary
Fitting
Sanitary
Fitting
Sanitary
Fitting
Supply and tap of brass including necessary sockets/ union nut complete. No. 555
Sanitary
Fitting
per unit) unit)
Sanitary
Fitting
Water 51.50 BDV 9 Providing & fixing screw down for 80 mm. dia. wheeled stop Bd.V.9 Page Number 925.00 35.00
Sanitary
Fitting
Water 51.51 BDV 12 Providing and fixing 100 mm dia. chromium plated brass Bd.V. 12 Page Number 205.00 50.00
Supply and showers rose to 15mm dia. supply pipe including necessary bend No. 556
Sanitary and socket complete.
Fitting
Water 51.52 BDV 14 Providing and fixing 15mm diameter concussion push button Bd.V.14 Page Number 230.00 24.00
Supply and type brass/gun metal self-closing tap including necessary socket No. 557
Sanitary complete.
Fitting
Water 51.53 BDV 14 Providing and fixing 25mm diameter concussion push button Bd.V. 14 Page Number 256.00 30.00
Supply and type brass/gun metal self-closing tap including necessary socket No. 557
Sanitary complete
Fitting
Water 51.54 BDV Providing and fixing push cock (Self closing tap) symet type of As directed by 0 NA NA
Supply and 15 mm dia. including necessary socket, testing etc. complete. Engineer- in-
Sanitary (Prior approval of sample and brand by Ex.Engineer is charge.
Fitting necessary before use.)
Water 51.55 BDV Providing and fixing push cock (Self closing tap) symet type of As directed by 0 NA NA
Supply and 20 mm dia. including necessary socket, testing etc. complete. Engineer- in-
Sanitary (Prior approval of sample and brand by Ex.Engineer is charge.
Fitting necessary before use.)
Water 51.56 BDV 19 Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 Bd. V. 19 Page Running 634.00 154.00
Supply and mm mild steel flat stringers and steps of 18 mm dia. mild steel No. 559 Meter
Sanitary bar for water tank including fixing it in (1:2:4) M-15 cement
Fitting concrete block 60cm x 30cm x 30cm & painting the ladder
complete.(Anti Corossive Paint)
Water 51.57 BDV 23 Providing and fixing White Glazed Earthenware full stall type Bd.V.23 Page Number 4700.00 850.00
Supply and Urinal with P.V.C. flushing cistern of 5 liters capacity with No. 562
Sanitary fitting, inlet pipes and stop tap, brackets for fixing the cistern,
Fitting 32 mm dia. P.V.C flush pipe with fittings and flushing
arrangement including lead soil pipe, lead trap, soil pipe
connectionup to the outside face of the wall
Water 51.58 BDV 23 Providing and fixing White Glazed Earthenware Squatting plate Bd.V.23 Page Number 2300.00 750.00
Supply and (Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity No. 562
Sanitary with fitting, inlet pipes and stop tap, brackets for fixing the
Fitting cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing
arrangement including lead soil pipe, lead trap, soil pipe
connectionup to the outside face of the wall
Water 51.59 BDV 23 Providing and fixing coloured glazed earthenware full stall type Bd.V.23 Page Number 6753.00 820.00
Supply and Urinal with P.V.C. flushing cistern of 5 liters capacity with No. 562
Sanitary fitting, inlet pipes and stop tap brackets for fixing the cistern
Fitting 32mm dia. P.V.C. flush pipe with fittings and flushing
arrangement including lead soil pipe, lead trap soil pipe
connection up to the outside face of the wall.
Water 51.60 BDV 26 Providing and fixing white glazed earthenware lipped flat Bd.V.26 Page Number 2200.00 750.00
Supply and back/corner type Urinal with PVC 5 liters flushing cistern with No. 564
Sanitary fittings, inlet pipe with stop tap, brackets for fixing the cistern,
Fitting 32 mm diameter P.V.C. flush pipe with fitting including lead
soil pipe, lead trap & soil pipe connection up to the outside face
of wall.
Water 51.61 BDV 27 Providing and fixing coloured glazed earthenware lipped flat Bd.V.27 Page Number 3242.00 555.00
Supply and back/corner type urinal with PVC 5 liters flushing cistern with No. 564
Sanitary fittings,capacity with fittings, inlet pipe and stop tap, brackets
Fitting for fixing the cistern, P.V.C. flush pipe with fittings including
lead soil pipe, lead trap and soil pipe connection up to the
outside face of the wall.
per unit) unit)
Water 51.62 BDV 29 Providing and laying 100 mm dia. half round white glazed Bd.V.29 Page Running 37.00 30.00
Supply and earthenware pipes in 1:5:10 cement concrete bedding including No. 565 Meter
Sanitary bends, etc. complete.
Fitting
Water 51.63 BDV 30 Providing and fixing white glazed earthenware Wash Hand Bd.V.30 Page Number 2153.00 208.00
Supply and Basin of 55cm. x 40 cm. size including cold water pillar tap/cold No. 565
Sanitary and hot water pillar tap brackets, rubber plugs and brass chain,
Fitting stop tap and necessary pipe connections including P.V.C. waste
pipe and trap up to the outside face of the wall.
Supply and Basin of 45cm x 30cm size including cold water pillar tap/cold No. 565
Fitting stop tap and necessary pipe connection including P.V.C. waste
Supply and Basin of 63cm x 45cm size including cold water pillar tap/cold No. 565
Water 51.66 BDV 30 Providing and fixing coloured glazed earthenware Wash Hand Bd.V.30 Page Number 2649.00 349.00
Supply and Basin of 55cm x 40 cm size including cold water pillar tap/cold No. 565
Supply and Basin of 45 cm x 30 cm size including cold water pillar tap/cold No. 565
Water 51.68 BDV Providing and fixing White glazed with bottle trap earthenware BDV.-30 Page Number NA NA
Supply and Wash Hand Basin of 45x30 cm size including cold water piller No.616
Sanitary taps, brackets, rubber plugs and brass chain, stop tap, chromium
Fitting plate bottle trap and necessary pipe connections including
UPAC waste pipe and trap upto the outside face of the wall,
making good the damaged surface, testing etc. complete.
(BRAND - HINDWARE/ JOHNSON/PARRYWARE/ VIENA/
AMERICAN STANDARD)
Water 51.69 BDV Providing and fixing White glazed with bottle trap earthenware BDV.-30 Page Number NA NA
Supply and Wash Hand Basin of 55x40 cm size including cold water piller No.616
Sanitary taps, brackets, rubber plugs and brass chain, stop tap, chromium
Fitting plate bottle trap and necessary pipe connections including
UPAC waste pipe and trap upto the outside face of the wall,
making good the damaged surface, testing etc. complete.
AMERICAN STANDARiv)
Water 51.70 BDV Providing and fixing White glazed with bottle trap BDV.-30 Page Number NA NA
Supply and earthenware Wash Hand Basin of 63x45 cm size including cold No.616
Sanitary water piller taps, brackets, rubber plugs and brass chain, stop
Fitting tap, chromium plate bottle trap and necessary pipe connections
including UPAC waste pipe and trap upto the outside face of the
wall, making good the damaged surface, testing etc. complete.
AMERICAN STANDARiv)
.
per unit) unit)
Water 51.71 BDV Providing and fixing Coloured glazed with bottle trap BDV.-30 Page Number NA NA
Supply and earthenware Wash Hand Basin of 45x30 cm. size including cold No.616
AMERICAN STANDARiv)
AMERICAN STANDARiv)
AMERICAN STANDARiv)
Supply and Basin of 63 cm x 45 cm size including cold water pillar tap/cold No. 565
Water 51.75 BDV 31 Providing and fixing white glazed earthenware sink 600mm x Bd.V.31 Page Number 2666.00 380.00
Supply and 200mm x 450mm including all connection of the G.I. supply and No.566
Sanitary P.V.C. waste pipes up to the outside face of the wall, cold water
Fitting chromium plated screw down bib tap, rolled steel or C.I.
brackets, rubber plug with chain and stop tap complete.
Water 51.76 BDV 31 Providing and fixing white glazed earthenware sink 450mm x Bd.V.31 Page Number 2100.00 200.00
Supply and 200mm x 300mm including all connection of the G.I. supply and No.566
Sanitary lead waste pipes up to the outside face of the wall, cold water
Fitting chromium plated screw down bib tap, rolled steel or C.I.
brackets, rubber plug with chain and stop tap complete.
Water 51.77 BDV Providing and fixing Autoclosing pillar cock of pressmatic tap As directed by Number NA NA
Supply and of Jaguar make or equivalent including all fixtures, fittings etc. Engineer in
Sanitary complete. charge.
Fitting
Water 51.78 BDV Providing and constructing granite kitchen platform with fixing As directed by Square NA NA
Supply and of stainless steel sink 600 mm x 450 mm size as per detailed Engineer in Meter
Sanitary drawing including vertical both side polished kadappah stone 25 charge.
Fitting to 30 mm thick supports with kadappah top 35 to 40 mm thick
and polished granite 16 to 20 mm top with side strips of granite
at front and both sides of platform raised with two vertical
granite supports 15 cm height and top granite of 75 x 40 cm
including cutting, opening for sink of required size in kadappah
as well as granite etc. complete.
Water 51.79 BDV 32 Providing and fixing 8cm C.I. Nahani Trap including C.I. Bd.V.32 Page Number 572.00 100.00
Supply and grating bend and piece of C.I. pipe upto the outside face of the No.567
Sanitary wall complete.
Fitting
Water 51.80 BDV 32 Providing and fixing 10cm C.I. Nahani Trap including C.I. Bd.V.32 Page Number 572.00 100.00
Supply and grating bend and piece of C.I. pipe upto the outside face of the No.567
Sanitary wall complete.
Fitting
Report Name: e DSR
per unit) unit)
Water 52.01 BDV 37 Providing and laying 100mm diameter half round salt glazed Bd.V.37, Page Running 220.00 32.00
Supply and stoneware pipes in brick masonry including fittings such as No. 571 Meter
Sanitary bends, tees, single junction, necessary excavation and jointing
Fitting complete.
Water 52.02 BDV 38 Providing and fixing 15cm x 10cm salt glazed stoneware gully Bd.V.38, Page Number 775.00 135.00
Supply and trap in cement concrete 1:4:8 outside the building including cast No. 572
Sanitary iron grating in the sink, connecting glazed stoneware pipe, brick
Fitting masonry chamber with cast iron lid and cast iron grating for the
gully trap.
Water 52.03 BDV 39 Providing and laying 100 mm dia salt glazed stoneware pipe Bd.V.39, Page Running 190.00 39.00
Supply and including fittings such as bends, tees, single junction, double No. 573 Meter
Sanitary junctions laying, jointing (including excavation and refilling the
Fitting trenches) complete.
Water 52.04 BDV 39 Providing and laying for 150 mm dia salt glazed stoneware pipe Bd.V.39, Page Running 275.00 56.00
Supply and including fittings Such as bends, tees, single junction, double No. 573 Meter
Sanitary junctions laying, jointing (including excavation and refilling the
Fitting trenches) complete.
Water 52.05 BDV 39 Providing & laying for 225mm dia. salt glazed S.W. Pipe Bd.V.39, Page Running 352.00 95.00
Supply and including fitting such as bends, tees, single junction, double No. 573 Meter
Sanitary junctions laying, jointing (including excavation & refilling the
Fitting trenches) complete
Water 52.06 BDV 41 Providing and laying concrete pipes of I.S.NP. class of 100mm Bd.V.41, Page Running 472.00 88.00
Supply and diameter in proper line, level and slope including necessary No. 573 Meter
Sanitary collars, excavation, laying, fixing with collars in cement mortar
Fitting 1:1 and refilling the trench complete.
Water 52.01 BDV 43 Providing & constructing Brick Masonry Inspection Chamber Bd.V.43, Page Number 2935.00 420.00
Supply and 60cm x 45cm x 90cm including 1:4:8 cement concrete No. 574
Sanitary foundation 1:2:4 cement concrete channels half round G.S.W.
Fitting pipes, Brick Masonry, plastering from inside and airtight C. I.
lid 65 kg with frame fixed in cement concrete etc. complete.
Water 52.11 BDV 43 Providing & constructing Brick Masonry Inspection Chamber Bd.V.43 Page Number 3154.00 461.00
Sanitary foundation 1:2:4 cement concrete channels half round
Fitting G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid
cover 75 kg with frame fixed in cement concrete.
Sanitary foundation 1:2:4 cement concrete channels half round G.S.W.
Fitting pipes, Brick Masonry, plastering from inside and with frame
fixed in cement concrete etc. complete with R.C.C. Cover.
Sanitary foundation 1:2:4 cement concrete channels half round
Fitting G.S.W.pipes, Brick Masonry, plastering from inside and with
frame fixed in cement concrete with R.C.C. Cover. ?
per unit) unit)
Water 52.14 BDV 44 Providing and constructing Brick Masonry inspection Chamber Bd.V.44, Page Number 7422.00 1358.00
Supply and 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 No. 575
Sanitary C.C.channels/half round glazed stoneware pipe channel, salt
Fitting glazed stone-ware intercepting trap with rodding pipe set in
1:4:8 cement concrete block, brick masonry plastering inside
and Outside, with C.I. lead cover with frame fixed in cement
concrete.
Water 52.15 BDV 44 Providing and constructing Brick Masonry inspection trap Bd.V.44, Page Number 4060.00 425.00
Supply and Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 No. 575
Sanitary C.C.channels/half round glazed stoneware pipe channel, salt
Fitting glazed stone-ware intercepting trap with rodding pipe set in
1:4:8 cement concrete block, brick masonry plastering inside
and Outside, fixed in cement concrete with R.C.C. Cover.
Water 52.16 BDV Providing & constructing Brick Masonry Inspection Chamber Bd.V.43 Page Number NA NA
Supply and 60cm x 45cm With R.C.C. raft in B.C. soil area including cost No. 574
Sanitary of reinforcement, 1:2:4 cement concrete channels half round
Fitting G.S.W. pipes, Brick Masonry, plastering from inside and airtight
75 mm thick R.C.C. cover etc. complete.
Water 52.17 BDV Providing & constructing Brick Masonry Inspection Chamber Bd.V.43 Page Number NA NA
Supply and 90cm x 45cm With R.C.C. raft in B.C. soil area including cost No. 574
Sanitary of reinforcement, 1:2:4 cement concrete channels half round
Fitting G.S.W. pipes, Brick Masonry, plastering from inside and airtight
with 75 mm thick R.C.C. cover etc. complete.
Water 52.18 BDV 45 Providing and fixing hume pipe septic tank 900mm diameter Bd.V.45, Page Number 6985.00 493.00
Supply and with vent pipe and cap including necessary (including No. 575
Sanitary excavation and laying)
Fitting
Water 52.19 BDV 46 Providing soak pit of size 120cm x 120cm x 120cm including Bd.V.46, Page Number 591.00 151.00
Supply and excavating and filling with brick-bats. No. 576
Sanitary
Fitting
Water 52.20 BDV Providing and fixing 450mm x 550mm size superior type As directed by Number 400.00 36.00
Supply and Belgium mirror with 16mm dia. nickel plated towel rod etc. Engineer in
Sanitary complete. charge.
Fitting
Water 52.21 BDV 60 Providing, laying & fixing P.V.C. pipe of 15mm dia. with As directed by Running 27.00 8.00
Supply and fittings such as bends, tees, reducers, clamps, etc. including Engineer in Meter
Sanitary necessary excavation, trench filling etc. complete. charge.
Fitting
Sanitary necessary excavation, trench filling etc. complete charge.
Fitting
Fitting
Fitting
Fitting
Fitting
Fitting
per unit) unit)
Water 52.28 BDV 60 Providing, laying & fixing P.V.C. pipe of 110 mm. dia. with As directed by Running 300.00 24.00
Sanitary necessary excavation, trench filling etc. complete charge.
Fitting
Water 52.29 BDV Providing and fixing partition with kadappa stone of all sizes As directed by Square 760.00 90.00
Supply and and 25 mm thick polished on both side and edges to original Engineer in Meter
Sanitary including fixing in position in cement mortor 1:4 curing polish- charge.
Fitting ing, cleaning etc complete.
Water 52.30 BDV Providing and fixing Orissa type white glazed earthenware 575 As directed by Number 2582.00 600.00
Supply and mm water closet pan including S trap with earthenware foot Engineer in
Sanitary rests, cast iron soil and vent pipe upto outside face of the wall charge.
Fitting 1:2:4 brick bat lime concrete bedding without flushing tank and
its accessories etc. complete.
Water 52.31 BDV Providing and fixing chromium plated towel rod 16 mm dia and As directed by Number 120.00 10.00
Supply and 75 cm. in length including all accessories complete. Engineer in
Sanitary charge.
Fitting
Water 52.32 BDV Providing and Fixing half turn 25 mm dia gun metal flushing As directed by Number 340.00 35.00
Supply and cock including all accessories etc. complete. Engineer in
Sanitary charge.
Fitting
Water 52.33 BDV Providing and fixing 1st class white glazed earthenware Orissa As directed by Number 5750.00 1085.00
Supply and Type W.C. Pan 580 mm dia including P or S trap cast iron soil Engineer in
Sanitary and vent pipe upto the outside face of the wall (1:5:1 0) cement charge.
Fitting concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern
with all necessary pipe connection etc. complete.
Water 52.34 BDV Providing and fixing European type white glazed earthenware As directed by Number 4362.00 540.00
Supply and coupled closet symphonic trap with symphonic low level white Engineer in
Sanitary glazed 10 litres cistern with black backlite seat with all charge.
Fitting necessary pipe connection etc. complete.
Water 52.35 BDV Providing & fixing orissa type colour glazed earthenware 625 x As directed by Number 6158.00 1035.00
Supply and 450 mm. w.c. pan including trap, C.I. soil & vent pipe upto the Engineer in
Sanitary out side face of wall including 100 mm. dia. C.I. plug, bend, charge.
Fitting 15mm. thick 10 litre PVC flushing cistern with all necessary
pipe connection etc. complete.
Water 52.36 BDV Providing and fixing 40 mm. dia Ball cock medium type with As directed by Number 573.00 40.00
Supply and PVC float including sockets & necessary fittings and tested as Engineer in
Sanitary per municipal requirements etc. complete. charge.
Fitting
Water 52.37 BDV Providing and fixing 15 mm. dia Ball cock medium type with As directed by Number 200.00 40.00
Supply and PVC float including sockets & necessary fittings and tested as Engineer in
Sanitary per municipal requirement etc. complete. charge.
Fitting
Water 52.38 BDV Cleaning elevated water storage Reservoir within a given period, As directed by Number 287.70 179.00
Supply and by using bleaching powder at the rate of 14 gm/sq.m .washing Engineer in
Sanitary thrice potassium permanganate at the rate of 2.50 gm/sq.m. charge.
Fitting finally, cleaning washing by using nylon brush, coir string and
duster, bailing out water etc. complete. i)Tank capacity
up to 2,000 litre.
duster, bailing out water etc. complete. ii) Tank
capacity up to 2,001 to 5000 litre.
duster, bailing out water etc. complete. iii) Tank
per unit) unit)
duster, bailing out water etc. complete. iv) Tank
duster, bailing out water etc. complete. v) Tank
capacity upto 10,001 to 15,000 litre.
duster, bailing out water etc. complete. vi) Tank
duster, bailing out water etc. complete. vii) Tank
duster, bailing out water etc. complete. viii) Tank
capacity upto 30,001 to 40,000 litre
duster, bailing out water etc. complete. ix) Tank
Water 52.47 BDV Cleaning elevated water storage Reservoir within a given period, As directed by 1000 Litre 33.60 32.00
duster, bailing out water etc. complete. x) capacity
50,001 litre to one lakh.
duster, bailing out water etc. complete. xi) Capacity
above one lakh upto 4.00 lakh
duster, bailing out water etc. complete. xii) Capacity
above 4.00 lakh upto 7.00 lakh .
per unit) unit)
duster, bailing out water etc. complete. xiii)
Capacity above 7.00 lakh upto 12.00 lakh.
Water 52.51 BDV Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil As directed by Running 285.00 60.00
Supply and vent/waste pipe and with necessary fixtures and fitting such as Engineer in Meter
Sanitary bends, tees, single junctions, slotted vent, clamps etc. complete charge.
Fitting
Water 52.52 BDV Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil As directed by Running 400.00 60.00
Supply and vent/waste pipe and with necessary fixtures and fitting such as Engineer in Meter
Sanitary bends, tees, single junctions, slotted vent, clamps etc. complete. charge.
Fitting
Water 52.53 BDV Providing and fixing H.D.P container Syntex or alike one piece As directed by Litre 7.10 0.75
Supply and moulded water tank made out of high density polythyler and engineer-in-
Sanitary built corrugated inclusive of delivery up to destination hoisting charge.
Fitting and fixing of accessories such as inlet,outlet overflow pipe
inclusive of all tanks capacity between 200 to 1000 liters
Water 52.54 BDV Providing and fixing H.D.P container Syntex or alike one piece As directed by Litre 7.10 0.75
Supply and moulded water tank made out of low density polythyler and built engineer-in-
Sanitary corrugation including of delivery up to destination hoisting and charge.
Fitting fixing of accessories such as inlet, outlet overflow of all tanks
capacity above 1000 to 20,000 litres
Water 52.55 BDV Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC BD.V 5 page Running 168.00 23.00
Supply and pipe with necessary fittings, remaking good the demolished 551 and as Meter
Sanitary portion etc. complete. directed by
Fitting Engineer in
charge
Water 52.56 BDV 5 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC BD.V 5 page Running 195.00 23.00
Fitting Engineer in
charge
Water 52.57 BDV 5 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC BD.V 5 page Running 237.00 25.00
Fitting Engineer in
charge
Fitting Engineer in
charge
Water 52.59 BDV 5 Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC BD.V 5 page Running 359.00 33.00
Fitting Engineer in
charge
Fitting Engineer in
charge
Water 52.61 BDV 5 Providing and laying in trenches 15 mm dai. CPVC pipe BD.V 5 page Running 167.00 30.00
Supply and including necessary excavation, fittings. Refilling trenches etc. 551 and as Meter
Sanitary complete directed by
Fitting Engineer in
charge
Sanitary complete. directed by
Fitting Engineer in
charge
per unit) unit)
Fitting Engineer in
charge
Fitting Engineer in
charge
Water 52.65 BDV 5 Providing and laying in trenches 40mm dai. CPVC pipe BD.V 5 page Running 378.00 29.00
Fitting Engineer in
charge
Water 52.66 BDV 5 Providing and laying in trenches 50mm dai. CPVC pipe BD.V 5 page Running 565.00 36.00
Fitting Engineer in
charge
Water 52.67 BDV 32 Providing and fixing 10 cm PVC nahani trap with grating etc. BD.V 32 A Number 316.00 87.00
Supply and complete. page 551 and
Sanitary as directed by
Fitting Engineer in
charge
Water 52.68 BDV Providing and fixing reinforced cement concrete cover of size As directed by Number 2513.00 178.00
Supply and 90 cm x 45 cm with frame over inspection chamber etc. Engineer in
Sanitary complete. Heavy duty (225 kg) charge.
Fitting
Sanitary complete. Medium duty (140 kg) charge.
Fitting
Sanitary complete. Heavy duty (160 kg) charge.
Fitting
Sanitary complete.Medium duty (100 kg) charge.
Fitting
Water 52.72 BDV 4 Providing and making ISI Mark ferrule connection of 15 mm Bd.V. 4 page Number 493.00 70.00
Supply and dia. to water main including ferrule coupling cast iron bell 551
Sanitary mouth cover, built in non return valve and fixing including
Fitting excavation and reinstatement complete.
Water 52.74 BDV 4 Providing and making ISI Mark ferrule connection of 25mm Bd.V. 4 page Number 493.00 70.00
Supply and dia.to water main including ferrule coupling cast iron bell mouth 551
Sanitary cover, built in non return valve and fixing including excavation
Fitting and reinstatement complete.
Water 52.76 BDV 4 Providing and making ISI Mark ferrule connection of 40mm dia. Bd.V. 4 page Number 493.00 70.00
Supply and to water main including ferrule coupling cast iron bell mouth 551
Sanitary cover, built in non return valve and fixing including excavation
Fitting and reinstatement complete.
per unit) unit)
Water 52.78 BDV 4 Providing and fixing stainless steel sink of size 600 x 510 x 200 As directed by Number 2800.00 250.00
Supply and mm of Nirali or equivalent make incluidng coupling, outlet pipe, Engineer in
Sanitary elbow and other necessary fitting, finishing etc. complete. charge
Fitting
Water 52.79 BDV Providing and fixing C.P. Angular stop clock with wall flange As directed by Number 945.00 125.00
Supply and Jaquar make or equivalent continental (CAT.NO. CON-059) Engineer in
Sanitary including necessary sockets/union nut etc. complete. charge
Fitting
Water 52.80 BDV Providing and fixing C.P.Two way BIB cock jaquar make or As directed by Number 1070.00 125.00
Supply and equivalent continental (CAT.NO. CON-041) including Engineer in
Sanitary necessary sockets/union nut etc. complete. charge
Fitting
Water 52.81 BDV Providing and fixing C.P. wall mixer with provision for As directed by Number 3696.00 245.00
Supply and overhead shower with 115mm long bend pipe & wall flange Engineer in
Sanitary jaquar or equivalent ?make continental (CAT.NO. CON-273 charge
Fitting UPR) including necessary sockets/union nut etc. complete.
Water 52.82 BDV Providing and fixing C.P. pillar cock long neck with aerator As directed by Number 1122.00 160.00
Supply and jaquar or equivalent make continental (CAT.NO. CON -021) Engineer in
Sanitary including necessary sockets/union nut etc. complete. charge
Fitting
Water 52.83 BDV Providing and fixing C.P. BIB cock with wall flange jaquar or As directed by Number 866.00 148.00
Supply and equivalent make continental (CAT.NO. CON-047) including Engineer in
Sanitary necessary sockets/ union nut etc. complete. charge
Fitting
Water 52.84 BDV Providing and fixing C.P. sink cock with raised J" shaped As directed by Number 1598.00 125.00
Supply and swinging casted spout jaquar or equivalent make continental Engineer in
Sanitary (CAT.NO. CON -359) including necessary sockets/ union nut charge
Fitting etc. complete."
Water 52.85 BDV Providing and fixing P.V.C. Rain water pipes of 160mm outer As directed by Running 432.00 60.00
Supply and diameter and having wall thickness of 2.2 to 2.7 mm confirming Engineer Meter
Sanitary to I.S. 13592-1992 including proper rainwater receiving recess Incharge
Fitting with P.V.C. plug, bend, necessary fittings, such as, offsets,
shoes, inluding fixing the pipe on wall using approved wooden
cleats projecting 25mm to 40mm from face of wall a fixing with
clips of approved quality and number ,filing the joint using
rubber gasket with solvent cement and properly resting the shoe
of pipes on C.C. or masonry blocks, including necessary
scaffolding and maintenance for 3 yrs for any leakages or
dislocations of pipes. All the P.V.C. fittings and additional 2
piece socket clips shall be got approved from engineer in charge
etc. complete. (The contractor shall give 3 yrs guarantee bond
for payment)
Water 52.86 BDV Providing and fixing European type wall-hung white water As directed by Number 7460.00 1940.00
Supply and closet of Paryware / Hindware with push valve concealed type Engineer
Sanitary with cover plate 32mm size of JAQUAR MAKE SERIES FLV- Incharge
Fitting 1095 including soil pipe ,vent pipe up to outside face of wall
,100mm dia. G.I. plug bend inlet pipe all fittings, cutting&
making good walls, floors etc. complete.
Water 52.87 BDV Providing and Fixing 110 mm diameter PVC Rain Water pipe As directed by Running 350.00 60.00
Supply and with necessary fittings such as bends, tees, single junctions, Engineer Meter
Sanitary slotted vent, clamps etc complete. Incharge
Fitting
Water 52.88 BDV providing and fixing oval type under counter wash hand basin of As directed by Number 9000.00 1550.00
Supply and 16 inch x 22 inch size and of special colour shade having Engineer in
Sanitary telephonic black / coloured granite of 180 mm thick stone black charge
Fitting kadappa framework including chromium plated coupling bottle -
Trap using CERA company or equivalent oval typa wash basin
model no 3448 as per detailed drawing or as directed by engg
incharge etc complete.
Report Name: e DSR
per unit) unit)
Water 53.01 BDV 5 Providing and laying in walls/ceilings/floors 15 mm dia. medium Bd.V.5 Page Running 175.00 23.00
Supply and grade having embossed as ISI Mark galvanised iron pipes of No. 551 Meter
Sanitary 1.25 kg/metre necessary fitting remaking good the demolished
Water 53.08 BDV 5 Providing and laying in walls/ceilings/floors 100 mm dia. Bd.V.5 Page Running 975.00 46.00
Supply and medium grade having embossed as ISI Mark galvanised iron No. 551 Meter
Sanitary pipes of 12.43 kg/metre necessary fitting remaking good the
Fitting demolished portion with filling trenches and with primer of anti-
corrosive oil paint , 2 coats complete.
Water 53.09 BDV 5 Providing and laying in trenches 15 mm dia.heavy grade having Bd.V.5 Page Running 185.00 28.00
Supply and embossed as ISI Mark galvanised iron pipes of 1.48 kg/metre No. 551 Meter
Sanitary necessary fitting remaking good the demolished portion with
Fitting filling trenches and with primer of anti-corrosive oil paint , 2
coats complete.
Water 53.10 BDV 5 Providing and laying in trenches 20 mm dia. heavy grade having Bd.V.5 Page Running 215.00 46.00
coats complete.
coats complete.
coats complete.
per unit) unit)
coats complete.
coats complete.
coats complete.
Water 53.16 BDV 5 Providing and laying in trenches 100 mm dia. heavy grade Bd.V.5 Page Running 496.00 43.00
Supply and having embossed as ISI Mark galvanised iron pipes of 14.74 No. 551 Meter
Sanitary kg/metre necessary fitting remaking good the demolished
Water 53.17 BDV 23 Providing and fixing 8 cm rigid PVC Nahani trap including Specfications Number 270.00 70.00
Supply and PVC grating ,bend, connecting piece of UPVC pipe up to the
Sanitary outside face of wall ,making the good damaged surface and
Fitting testing etc. complete ( Prior approval of sample and brand by
Ex. Engr. is necessary before use)
Water 53.18 BDV 24 Providing and fixing 15 cm rigid PVC Nahani trap including Specfications Number 355.00 175.00
Supply and PVC grating ,bend,connectingpiece of UPVC pipe up to the
Sanitary outside face of wall ,making the good damaged surface and
Fitting testing etc. complete ( Prior approval of sample and brand by
Ex. Engr. is necessary before use)
Water 53.19 BDV 21 Providing and fixing European type white glazed earthenware Specfications Number 3149.00 400.00
Supply and water closet pan with UPVC seat and lid with chromium plated
Sanitary brass hinges and rubber buffers including UPVC and vent pipe
Fitting up to the outside face of wall 10 litre enameled low level
flushing cistern with fittings pipe stop tap brackets for fixing
cistern 32 mm dia. UPVC flush pipe with fittings and clamps
,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I.
chain and pulley,with water Jet and fitting including cutting and
making good to the walls and floors testing etc. complete.(prior
approval of sample and brand by Ex. Engineer is necessary
before use)
Water 53.20 BDV 21 Providing and fixing European type white glazed earthenware Specfications Number 2477.00 390.00
Fitting up to the outside face of wall without flushing cistern with flush
cock and with water Jet and necessary fittings including cutting
and making good to the walls and floors testing etc. complete.(
prior approval of sample and brand by Ex. Engineer is necessary
before use)
Water 53.21 BDV 22 Providing and fixing European type Colour glazed earthenware Specfications Number 3512.00 390.00
Fitting up to the outside face of wall 10 liter enameled low level
flushing cistern with fittings pipe stop tap brackets for fixing
cistern 32 mm dia. UPVC flush pipe with fittings and clamps
,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I.
chain and pulley,with water Jet and fitting including cutting and
making good to the walls and floors testing etc. complete.( prior
approval of sample and brand by Ex. Engineer is necessary
before use)
per unit) unit)
Water 53.22 BDV 23 Providing and fixing European type Colour glazed earthenware Specfications Number 2991.00 390.00
Fitting up to the outside face of wall without flushing cistern with flush
cock and with water Jet and necessary fittings including cutting
and making good to the walls and floors testing etc. complete.(
prior approval of sample and brand by Ex. Engineer is necessary
before use)
Water 53.23 BDV 20 Providing and fixing Anglo Indian type white glazed Specfications Number 3922.00 480.00
Supply and earthenware water closet pan with trap with UPVC seat and lid
Sanitary with chromium plated brass hinges and rubber buffers including
Fitting UPVC and vent pipe up to the outside face of wall with flushing
cistern and necessary fittings including cutting and making good
to the walls and floors testing etc. complete.( prior approval of
sample and brand by Ex. Engineer is necessary before use)
Water 53.24 BDV 22 Providing and fixing high level 10 liter capacity with fittings Specfications Number 1204.00 210.00
Supply and inlet PVC pipe with stop tap ,brackets for fixing the cistern,32
Sanitary mm dia. PVC flush pipe with fitting and clamps 20 mm dia.
Fitting PVC overflow pipe with mosquito proof couplings, galvanised
iron chain and pulley painting if ordered to cistern pipe etc. and
cutting and making good the damaged wall and testing etc.
complete ( Prior approval of sample and brand by Ex. Engr. is
necessary before use)
Water 53.25 BDV 23 Providing and fixing in position UPVC ultra violet stabilized Specfications Number 45.00 4.50
Supply and 110 mm outer diameter cowl dome confirming to I.S.-4985
Sanitary including making joints with solvent cement etc. complete
Fitting
Water 53.26 BDV 23 Providing and fixing Glass self 125 mm wide and 600 mm long Specfications Number 111.00 30.00
Supply and with necessary chromium plated brackets providingT.W.gutties
Sanitary etc. complete
Fitting
Water 53.27 BDV 23 Providing , constructing & fixing Supreme make or equivalent Specfications Number 3119.00 340.00
Supply and make Ultra 250 mm dia. Inspection chamber made up of UPVC
Sanitary material of thickness 3.5 mm & height of 259 mm with inlet &
Fitting outlet of 110 mm dia. with 75 mm dia. U Trap, Ultra shaft pipe
of Upvc material having height of 470 mm and fixing Ultra 250
mm dia. UPVC cover & frame in 150 mm thick in c.c.1:2:4,
having crushed sand bed of 100 mm thick of size 550 mm dia.
Including excavation & refilling the sides of chamber by crushed
sand cushioning 150 mm thickness, connecting all required
UPVC fittings with rubber lubricant etc. complete.
Water 53.28 Bd-V Providing , constructing & fixing Supreme make or equivalent As Directected Number 8254.00 421.00
Supply and make Ultra 450 mm dia. Inspection chamber made up of By Engineer
Sanitary Polypropylene/polyethylene material of thickness 3.5 mm & Incharge
Fitting height of 388 mm with 160 or 200 mm main inlet (s) outlet &
110 & / or 160 mm branch inlets, with 450 mm dia. Ultra shaft
pipe of HDPE material having height of 460 mm, having R.C.C.
cover & frame fixing in 150 mm thick in c.c.1:2:4, having
crushed sand bed of 150 mm thick of size 750 mm dia.
Including excavation & refilling the sides of chamber by sand
crushed cushioning 150 mm thickness, connecting all required
UPVC fittings with rubber lubricant etc. complete.
per unit) unit)
Water 53.29 Bd-V Providing , constructing & fixing Supreme make or equivalent As Directected Number 19646.00 410.00
Supply and make Ultra 600 mm dia. Inspection chamber made up of By Engineer
Sanitary Polypropylene/polyethylene material Having 315 mm diameter Incharge
Fitting inlet(s)/outlets & with eccentric reducers as per requirement to
connect 160 mm & 200 mm pipes having thickness of 5 mm &
600 mm in height, with inbuilt shaft achieve the invert depth as
per site condition of wall thickness of 5 mm having R.C.C.
cover & frame fixing in 150 mm thick in c.c.1:2:4, having
crushed sand bed of 150 mm thick of size 750 mm dia.
Including excavation & refilling the sides of chamber by ?sand
crushed cushioning 150 mm thickness, connecting all required
UPVC fittings with rubber lubricant etc.complete.
Water 53.30 Bd-V Providing , laying & fixing ,jointing Supreme Eco- drain 110 As Directected Running 311.00 25.00
Supply and mm SN 8 Nu- Drain Upvc pipes or of equivalent make, By Engineer Meter
Sanitary manufacture as per EN 13476 or equivalent as per I.S.15328 Incharge
Fitting with fittings such a bends, tees, coupler, etc, jointing with rubber
lubricant including necessary excavation, trench refilling with
selective excavated material etc. complete.
Fitting with fittings such a bends, tees , coupler, etc, jointing with
rubber lubricant including necessary excavation, trench refilling
with selective excavated materialetc. complete.
Fitting with fittings such a bends, tees tees, coupler etc, jointing with
rubber lubricant including necessary excavation, trench refilling
with selective excavated materialetc. complete.
Water 53.33 BDV Providing and fixing 15 mm diameter PVC Aqua kraft type As Directected Number 240.00 56.00
Supply and Supreme make or equivalent make super bib tap with flange By Engineer
Sanitary including all accessories etc complete Incharge
Fitting
Supply and Supreme make or equivalent make super Two Way bib tap with By Engineer
Sanitary flange and extender including all accessories etc complete Incharge
Fitting
Supply and Supreme make or equivalent make super push button type cock / By Engineer
Sanitary tap with flange including all accessories etc complete Incharge
Fitting
Supply and Supreme make or equivalent make super wall sink type tap with By Engineer
Sanitary flange including all accessories etc complete Incharge
Fitting
Supply and Supreme make or equivalent make super jet spray with flange 2 By Engineer
Sanitary in 1 faucet 1.50 metre long including all accessories etc Incharge
Fitting complete
Supply and Supreme make or equivalent make super right angle stop tap By Engineer
Sanitary with flange including all accessories etc complete Incharge
Fitting
Supply and Supreme make or equivalent make super Pillar tap with flange By Engineer
Sanitary including all accessories etc complete Incharge
Fitting
Report Name: e DSR
per unit) unit)
Building 54.01 BDW 2 Guniting by dry mix process as per IS 9012 (1978) to ceiling Bd.W.2 Page Square 192.00 115.00
Miscellaneo sofit etc. in C.M. 1:3, 20 mm thick under pressure of 2.1 kg to No. 582 Meter
us items 2.8 kg per sq.cm including forms, scaffolding, floating the
surface, curing for 14 days etc. complete. (Excluding
reinforcement).
Building 54.02 BDW 2A Guniting by dry mix process as per IS 9012 (1978) to ceiling Bd.W.2 Page Square 324.00 57.00
Miscellaneo sofit etc. in C.M. 1:3, 25mm thick under pressure of 2.1 kg to No. 582 Meter
us items 2.8 kg per sq.cm. including forms, scaffolding, floating the
reinforcement).
Building 54.03 BDW 2B Guniting by dry mix process as per IS 9012 (1978) to ceiling, Bd.W.2 Page Square 357.00 80.00
Miscellaneo sofit etc. in c.m. 1:3, 40mm thick under pressure of 2.1 Kg. to No. 582 Meter
us items 2.8 Kg. per sq.m. including forms, scaffolding, floating the
reinforcement)
Building 54.04 BDW 2C Guniting by dry mix process as per IS 9012(1978) to ceiling, Bd.W.2 Page Square 588.00 94.00
Miscellaneo sofit etc. in C.M. 1:3, 50mm thick under pressure of 2.1 kg to No. 582 Meter
us items 2.8 kg per sq.cm. including forms, scaffolding, floating the
reinforcement).
Building 54.05 BDW 2D Guniting by dry mix process as per IS 9012 (1978) to beams in Bd.W.2 Page Square 327.00 94.00
Miscellaneo C.M. 1:3, 20 mm thick under pressure of 2.1 kg to 2.8 kg sq.cm. No. 582 Meter
us items including forms, scaffolding, floating the surface, curing for 14
days etc. complete. (Excluding reinforcement).
Building 54.06 BDW 2E Guniting by dry mix process as per IS 9012 (1978) to beams in Bd.W.2 Page Square 339.00 93.00
Miscellaneo C.M. 1:3, 25mm thick under pressure of 2.1 kg to 2.8 kg per No. 582 Meter
us items sq.cm. including forms, scaffolding, floating the surface, curing
for 14 days etc. complete. (Excluding reinforcement).
Building 54.07 BDW 2K Guniting by dry mix process as per I.S. 9012 (1978) to the Bd.W.2 Page Square 350.00 120.00
Miscellaneo vertical surface (other than column) in C.M. 1:3, 20 mm thick No. 582 Meter
us items under pressure of 2.1 Kg. to 2.8 Kg per sq.cm. including forms,
scaffolding, floating, the surface curing for 14 days etc.
complete. (excluding reinforcement).
Building 54.08 BDW 2L Guniting by dry mix process as per IS 9012 (1978) to vertical Bd.W.2 Page Square 370.00 119.00
Miscellaneo surface (other than column) in C.M. 1:3, 25 mm thick under pres- No. 582 Meter
us items sure of 2.1 Kg. to 2.8 Kg. per sq.cm. including forms, scaffold-
ing, floating the surface, curing for 14 days etc. complete
(excluding reinforcement).
Building 54.09 BDW 3 Providing and erecting 1.5 metre high wire fencing with seven Bd.W.3 Page Running 445.00 53.00
Miscellaneo rows of barbed wire supported on M.S.Angles (50 mm x 50 mm No. 583 Meter
us items x 6mm) at 2.5 Metres, center to center including excavating pits
for foundation, fixing post in cement concrete 1:4:8 of size 45 x
45 x 45 cm . fastening the wire and painting the M.S.Angles
with one coat of red lead primer and two coats of painting etc.
complete.
Building 54.10 BDW 6 Providing and fixing mild steel grill gate with angle iron frame Bd.W.6 Page Square 1789.00 200.00
Miscellaneo 65 mm x 65 mm x 10 mm with iron bars at 150mm.C/C and No. 585 Meter
us items diagonal flats as per the detailed drawing including hinges, pivot
blocks locking arrangement, welding riveting and oil painting of
three coats of approved shade. Weight of gate 35 Kg/smt.
Building 54.11 BDW 7 Providing and fixing 90 cm. x 60 cm. Marble plate engraving Bd.W.7 Page Number 7302.00 215.00
Miscellaneo 10cm. height letter, figures including painting the lefters/figures No. 586
us items with approved colour and shade complete.
Building 54.12 BDW 7 Providing and fixing 90 cm. x 60 cm. Granite plate engraving Bd.W.7 Page Number 809500.00 214.00
Miscellaneo 10cm. height letter, figures including painting the lefters/figures No. 586
us items with approved colour and shade complete.
per unit) unit)
Building 54.13 BDW Providing and erecting 1.2 meter high wire fencing with five Bd. W. 3, Page Running 435.00 60.00
Miscellaneo rows of barbed Wire supported on mild steel angle(50x50x6mm) No. 583 Meter
us items post at 2.5 m c/c including excavation of pits of foundation
concrete fixing the posts in (1:4:8) cement concrete block of
45x45x45 cm and fastening the Wires and painting the angles
with one coat with red lead primer and two coats of oil painting
etc. complete.
Building 54.14 BDW Providing and fixing rain tattis with bamboos and karve grass As directed by Square 20.00 9.00
Miscellaneo with 75 mm thick grass and removing the same after rain is over Engineer in Meter
us items (size of bamboos 50mm to 75mm. dia and 3 M to 3.5 M. long. charge.
Building 54.15 BDW Providing and fixing grass chhapper (roof) with necessary As directed by Square 24.00 9.00
Miscellaneo bamboos and karve frame with 75 mm. thick grass etc, removing Engineer in Meter
us items the same after rain is over (size of bamboos 50 mm to 75 mm charge.
dia and 3 M to 3.5 M. long.)
Building 54.16 BDW Providing and fixing grass chhapper (roof) with necessary As directed by Square 24.00 9.00
Miscellaneo bamboos and karve frame with 75 mm. thick grass etc, removing Engineer in Meter
us items the same after rain is over (size of bamboos 25 mm dia and 3 M. charge.
to 3.5 M. long
Building 54.17 BDW Providing and fixing Bamboo Matting screen for partition with As directed by Square 112.00 75.00
Miscellaneo bamboo sticks. Engineer in Meter
us items charge.
Building 54.18 BDW Providing and fixing lightening conductor system comprising of BDW 1 Page Number 15141.00 2498.00
Miscellaneo erecting Air-Termination consisting of tubular copper rod of 581
us items 25mm dia. 1.2mm thick with multiple points head 1.2mt. long
(Heavy Duty) welded or clamped to G.I. pipe pole B Grade
50mm dia. of required length with M.S. round base plate 25cm.
diam. and 10mm thick at bottom embeded in cement concrete
1:3:6 foundation of size 45cm diam. x 45cm Height and
providing earthing with copper earth plate of size 60 x 60 x
0.3cms with cadmium plated nut bolts to fix earthing strip
burried in specially prepared earth pit 1.5 metre below ground
level with 40 Kg charcoal and salt with alternate layers of
charcoal and salt and G.I. pipe 40mm dia. 2 metrer length
burried in earth upto earthling plate remaining portion above
ground level for watering and refilling complete. Note - Copper
strip from lightening conductor is not considered in this item.
Building 54.19 BDW Providing and fixing copper strip 25 mm wide and 3 mm thick BDW 1 Page Running 168.00 112.00
Miscellaneo for lightening conductor including fixing with screws required 581 as directed Meter
us items scaffolding etc. complete. Note - Lightening conductor and Enginner in
earthing pit is not considered in this item. charge
Building 54.20 BDW Providing and fixing in position alluminium strips of size 50 As directed by Running 177.00 70.00
Miscellaneo mm. x 3 mm. for nosing the steps including fixing with screws Engineer in Meter
us items and raval plugs, bending and cutting to the required shape and charge.
size, finishing with paint, necessary mortar bedding of 1:3
cement mortar to get exact line and level including watering and
Building 54.21 BDW Providing and fixing crimped wire G.I. mesh of size 20mm x As directed by Square 680.00 180.00
Miscellaneo 20mm 10 guage to iron angle frame including welding crimp Engineer in Meter
us items mesh to angle frame and steel flat, fixing the frame in its original charge.
position and oil painting etc. complete. (excluding cost of
structural steel)
Building 54.22 BDW Providing general pest control service to big size inspection As directed by Number NA NA
Miscellaneo chamber to control nuisance of the cockroaches, etc. complete Engineer in
us items during years with monthly check up. charge.
Building 54.23 BDW Providing and fixing welded mesh fabric for guniting of mesh As directed by Square NA NA
Miscellaneo size 75mm x 75mm and 10 gauge thick including scaffolding Engineer in Meter
us items etc. complete. charge.
Building 54.24 BDW Providing and fixing welded mesh fabric for guniting of mesh As directed by Square NA NA
Miscellaneo size 150mm x 150mm and 10 gauge I.e. 3.25mm thick including Engineer in Meter
us items scaffolding etc. complete. charge.
Report Name: e DSR
per unit) unit)
Fire Safety 55.01 FIRE Providing 1 kg Fire Extinguisher Mono Ammonium Phosphate As Directed Each
Powder 50, Stored Pressure Type, Pressure Gauge Gross Weight By The
2.3 kg, Empty Weight 1.3 kg, Can Height 295 MM, Diameter 87 Engineer In-
MM, Discharge Time less than 8 Secs, Controllable discharge Charge
mechanism, Range minimum 4 meters, applicable on Class ABC
and electrically started Fire, A Rating 5A, B Rating 13B Can
Construction: Deep drawn & Co. Mig welded valve construction
Forging and Machining, internal Coating of Can: Epoxy powder
coating, External Coating of Can: Epoxy Polyster powder
Coating, Sheet metal THickness: 1.60 MM, with 5 Years
Warranty etc.complete.
3.6 kg, Empty Weight 1.6 kg, Can Height 341 MM, Diameter Engineer In-
108 MM, Discharge Time less than 8 Secs, Controllable Charge
discharge mechanism, Range minimum 4 meters, applicable on
Class ABC and electrically started Fire, A Rating 5A, B Rating
21B Can construction: Deep drawn & Co. Mig welded, Valve
construction : Forging and Machining, Internal Coating of Can :
Epoxy powder coating, External Coating of Can: Epoxy Polyster
powder Coating, Sheet metal Thickness: 1.60 MM, with 5 Years
6.9 kg, Empty Weight 2.9 kg, Can Height : 435 MM, Diameter Engineer In-
140 MM, Discharge Time : less than 9 Secs, Controllable Charge
powder Coating, Sheet metal Thickness: 1.60 MM, ISI and EN
Approved with 5 Years Warranty etc.complete.
per unit) unit)
3.6 kg, Empty Weight 1.6 kg, Can Height 108 MM, Diameter Engineer In-
71 kg, Empty Weight 46 kg, Can Height : 1190 MM, Diameter Engineer In-
Class ABC and electrically started Fire, Can construction: Deep
drawn & Co. Mig welded, Valve construction : Forging and
Machining, Internal Coating of Can : Epoxy powder coating,
External Coating of Can: Epoxy Polyster powder Coating, Sheet
metal Thickness: 4 MM, with one Years Warranty etc.complete.
per unit) unit)
125 kg, Empty Weight 75 kg, Can Height : 1190 MM, Diameter Engineer In-
metal Thickness: 5 MM, with one Years Warranty etc.complete.
161.5 kg, Empty Weight 86.5 kg, Can Height : 1190 MM, Engineer In-
Diameter 400 MM, Discharge Time : less than 60 Secs, Charge
Controllable discharge mechanism, Range minimum 10 meters,
applicable on Class ABC and electrically started Fire, Can
construction: Deep drawn & Co. Mig welded, Valve
powder Coating, Sheet metal Thickness: 5 MM,with one Years
Fire Safety 55.13 FIRE Providing 5 kg Ceiling Mounted Fire Extinguisher Mono As Directed Each
Ammonium Phosphate Powder 90, Stored Pressure Type, By The
Pressure Gauge Gross Weight 7.7 kg, Empty Weight 2.7 kg, Can Engineer In-
Height : 267 MM, Diameter 230 MM, Discharge Time : less Charge
than 8 Secs, , Range minimum 10 meters, applicable on Class
ABC and electrically started Fire, A Rating 21A, B Rating 89B
Can construction: Deep drawn & Co. Mig welded, Valve
Fire Safety 55.14 FIRE Providing 10 kg Ceiling Mounted Fire Extinguisher Mono As Directed Each
Ammonium Phosphate Powder 90, Stored Pressure Type, By The
Pressure Gauge Gross Weight 14.8 kg, Empty Weight 4.8 kg, Engineer In-
Can Height : 316 MM, Diameter 300 MM, Discharge Time : Charge
less than 10 Secs , Range minimum 10 meters, applicable on
Fire Safety 55.15 FIRE Providing 1 kg Ceiling Mountd Fire Extinguisher Monnex As Directed Each
Powder, Stored Pressure Type, Pressure Gauge Gross Weight By The
108 MM, Discharge Time : less than 9 Secs , Range minimum 4 Charge
meters, applicable on Class A,B and electrically started Fire, B
Rating 89B, Can construction: Deep drawn & Co. Mig welded,
Valve construction : Forging and Machining, Internal Coating of
Can : Epoxy powder coating, External Coating of Can: Epoxy
Polyster powder Coating, Sheet metal Thickness: 1.60 MM, with
5 Years Warranty etc.complete.
per unit) unit)
Class A,B and electrically started Fire, Very effective on Class
B fire,B Rating 144B, Can construction: Deep drawn & Co. Mig
welded, Valve construction : Forging and Machining, Internal
Coating of Can : Epoxy powder coating, External Coating of
Can: Epoxy Polyster powder Coating, Sheet metal Thickness:
1.60 MM, with 5 Years Warranty etc.complete.
Class A,B and electrically started Fire, Very effective on Class
B fire, Can construction: Deep drawn & Co. Mig welded, Valve
Fire Safety 55.18 FIRE Providing 4 kg Fire Extinguisher for Live Metal fires, SPM-TEC As Directed Each
powder Based Stored Pressure Type, Melting point at 600-650 By The
degree C, Applicable on Class D metal Fires in Magnesium, Engineer In-
Aluminium, Zinc, Sodium, Potassium, Francium, Lithium, Charge
Cesium, Pressure Gauge Gross Weight 6.9 kg, Empty Weight
2.9 kg, Can Height : 435 MM, Diameter 140 MM, Discharge
Time : less than 15 Secs, Controllable discharge mechanism,
Range minimum 4 meters, Can construction: Deep drawn & Co.
Mig welded, Valve construction : Forging and Machining,
Internal Coating of Can : Epoxy powder coating, External
Coating of Can: Epoxy Polyster powder Coating, Sheet metal
Thickness: 1.60 MM, EN Approved with 5 Years Warranty
etc.complete.
etc.complete.
etc.complete.
per unit) unit)
Fire Safety 55.21 FIRE Providing 4 kg Fire Extinguisher for Heavy Metal fires, SPM- As Directed Each
TEC powder Based Stored Pressure Type, Melting point at 1200 By The
degree C, Applicable on Class D metal Fires in Plutonium, Engineer In-
Titanium, lead, Coper, Tungsten, Cobalt and Manganese, Charge
Pressure Gauge Gross Weight 6.9 kg, Empty Weight 2.9 kg, Can
Height : 435 MM, Diameter 140 MM, Discharge Time : less
than 15 Secs, Controllable discharge mechanism, Range
minimum 4 meters, Can construction: Deep drawn & Co. Mig
1.60 MM, EN Approved with 5 Years Warranty etc.complete.
Pressure Gauge Gross Weight 9.5 kg, Empty Weight 3.5 kg,
Can Height : 486 MM, Diameter 160 MM, Discharge Time :
less than 16 Secs, Controllable discharge mechanism, Range
Pressure Gauge Gross Weight 13.8 kg, Empty Weight 4.8 kg,
Can Height : 611 MM, Diameter 175 MM, Discharge Time :
less than 18 Secs, Controllable discharge mechanism, Range
Fire Safety 55.24 FIRE Providing 2 kg Fire Extinguisher Clean Agent HCFC-123, As Directed Each
Stored Pressure Type, Pressure Gauge Gross Weight 3.6 kg, By The
Empty Weight 1.6 kg, Can Height 341 MM, Diameter 108 MM, Engineer In-
Discharge Time less than 6 Secs, Controllable discharge Charge
and electrically started Fire, B Rating 21B Can construction:
Deep drawn & Co. Mig welded, Valve construction : Forging
and Machining, Internal Coating of Can : Epoxy powder
coating, External Coating of Can: Epoxy Polyster powder
Coating, Sheet metal Thickness: 2.00 MM, EN Approved with
5 Years Warranty etc.complete.
Stored Pressure Type, Pressure Gauge Gross Weight : 6.9 kg, By The
Empty Weight: 2.9 kg, Can Height 435 MM, Diameter 140 MM, Engineer In-
powder Coating, Sheet metal Thickness: 1.60 MM, EN
per unit) unit)
Stored Pressure Type, Pressure Gauge Gross Weight : 9.5 kg, By The
Empty Weight: 3.5 kg, Can Height 486 MM, Diameter 160 MM, Engineer In-
Stored Pressure Type, Pressure Gauge Gross Weight :7.7 kg, By The
Empty Weight 2.7 kg, Can Height :267 MM, Diameter 230 MM, Engineer In-
Discharge Time less than 8 Secs, Auto discharge mechanism, on Charge
temperature rise, applicable on Class ABC and electrically
started Fire, Can construction: Deep drawn & Co. Mig welded,
Can : Epoxy powder coating, External Coating of Can: Epoxy
Polyster powder Coating, Sheet metal Thickness: 1.60 MM, EN
Stored Pressure Type, Pressure Gauge Gross Weight :14.8 kg, By The
Empty Weight : 4.8 kg, Can Height :316 MM, Diameter : 300 Engineer In-
MM, Discharge Time less than 10 Secs, Auto discharge Charge
mechanism, on temperature rise, applicable on Class ABC and
electrically started Fire, Can construction: Deep drawn & Co.
etc.complete.
Fire Safety 55.29 FIRE Providing 2 kg Fire Extinguisher Clean Agent HFC 236, Zero As Directed Each
ODP, Stored Pressure Type, Pressure Gauge Gross Weight :3.6 By The
kg, Empty Weight : 1.6 kg, Can Height :341 MM, Diameter : Engineer In-
discharge mechanism, Range Minimum 2 meters, applicable on
Class ABC and electrically started Fire B Rating 21B, Can
ODP, Stored Pressure Type, Pressure Gauge Gross Weight :6.9 By The
Class ABC and electrically started Fire A Rating 5A, B Rating
34B, Can construction: Deep drawn & Co. Mig welded, Valve
per unit) unit)
ODP, Stored Pressure Type, Pressure Gauge Gross Weight : 9.5 By The
Class ABC and electrically started Fire A Rating 5A, B Rating
34B, Can construction: Deep drawn & Co. Mig welded, Valve
ODP, Stored Pressure Type, Pressure Gauge Gross Weight : By The
13.8 kg, Empty Weight : 4.8 kg, Can Height : 611 MM, Engineer In-
Diameter : 175 MM, Discharge Time Minimum 12 Secs, Charge
Controllable discharge mechanism, Range Minimum 4 meters,
Fire Safety 55.33 FIRE Providing 5 kg Ceiling Mounted Fire Extinguisher Clean Agent As Directed Each
HFC 236, Zero ODP, Stored Pressure Type, Pressure Gauge By The
Gross Weight : 7.7 kg, Empty Weight : 2.7 kg, Can Height : 267 Engineer In-
MM, Diameter : 230 MM, Discharge Time Minimum 8 Secs, Charge
Auto discharge mechanism, On temperature rise, applicable on
metal Thickness: 1.60 MM, EN Approved with 5 Years
Fire Safety 55.34 FIRE Providing 10 kg Ceiling Mounted Fire Extinguisher Clean Agent As Directed Each
HFC 236, Zero ODP, Stored Pressure Type, Pressure Gauge By The
Gross Weight : 14.8 kg, Empty Weight : 4.8 kg, Can Height : Engineer In-
316 MM, Diameter : 300 MM, Discharge Time Minimum 8 Charge
Secs, Auto discharge mechanism, On temperature rise,
Fire Safety 55.35 FIRE Providing 2 kg CO2 Gas Type Fire Extinguisher, Use Unused As Directed Each
Mechanism Squeeze Grip, Gross Weight : 9.1 kg, Empty Weight By The
: 7.1 kg, Can Height : 600 MM, Diameter 108 MM, Discharge Engineer In-
Time : less than 8 Secs, Controllable discharge mechanism, , Charge
applicable on Class B&C fire , B Rating 13B Can construction:
Hot Spinning, Valve construction : Forging and Machining,
Internal Coating of Can : Not Applicable, External Coating of
Can: Spray Painting,, Sheet metal Thickness: 4.0 MM, ISI
Approved with 1 Year Warranty etc.complete.
per unit) unit)
Fire Safety 55.36 FIRE Providing 4.5 kg CO2 Gas Type Fire Extinguisher, Trolley As Directed Each
Mounted, Easy Weight Management Use Unused Mechanism By The
Squeeze Grip, Gross Weight : 19.1 kg, Empty Weight : 14.6 kg, Engineer In-
less than 10 Secs, Controllable discharge mechanism, ,
Squeeze Grip, Gross Weight : 30.5 kg, Empty Weight : 24 kg, Engineer In-
applicable on Class B&C fire , B Rating 34 B Can construction:
Mounted, Squeeze Grip, Gross Weight : 93.5 kg, Empty Weight By The
: 71 kg, Can Height : 1333 MM, Diameter 232 MM, Discharge Engineer In-
Time : less than 20 Secs, Controllable discharge mechanism, Charge
,applicable on Class B&C fire , Can construction: Hot Spinning,
Can : Not Applicable, External Coating of Can: Spray Painting,,
Sheet metal Thickness: 4.5 MM, ISI Approved with 1 Year
Fire Safety 55.40 FIRE Providing 2 kg CO2 Gas Type Fire Extinguisher, Use Unused As Directed Each
Mechanism Squeeze Grip, Gross Weight : 5.16 kg, Empty By The
Weight : 3.16 kg, Can Height : 372 MM, Diameter 232 MM, Engineer In-
Discharge Time : less than 8 Secs, Controllable discharge Charge
mechanism, , applicable on Class B&C fire, B Rating 13B, Can
construction: Cold Impact Extrusion, Valve construction :
Forging and Machining, Internal Coating of Can : Not
Applicable, External Coating of Can: Spray Painting,
Aluminium metal ISO & PESO Approved with 1 Year Warranty
etc.complete.
Mounted Easy Weight Management, Use Unused Mechanism By The
less than 10 Secs, Controllable discharge mechanism,
applicable on Class B&C fire, B Rating 21B, Can construction:
Cold Impact Extrusion,Valve construction : Forging and
Machining, Internal Coating of Can : Not Applicable, External
Coating of Can: Spray Painting,, Aluminium metal ISO & PESO
per unit) unit)
Fire Safety 55.42 FIRE Providing 9 Liters Fire Extinguisher,AFFF Foam Type, Stroed As Directed Each
Pressure Type Pressure Gauge,Gross Weight : 14.6 kg, Empty By The
mechanism, , Range minimum 6 meters, Applicable on Class A
& B fire, A Rating 13A, B Rating 55B, Can construction: Deep
drawn & co.,Mig Welded, Valve construction : Forging and
Machining, Internal Coating of Can : Epoxy Powder Coating,
External Coating of Can: Epoxy Polyster Powder coating Sheet
Metal Thickness: 2.0 MM ISI and EN Approved, with 1 Year
Fire Safety 55.43 FIRE Providing 50 Liters Fire Extinguisher,AFFF Foam Type,External As Directed Each
Cartridge Type Pressure Gauge Gross Weight : 102 kg, Empty By The
Weight : 52 kg, Can Height : 1192 MM, Diameter 300 MM, Engineer In-
& B fire, Can construction: Deep drawn & Co2.,Mig Welded,
Can : Epoxy Powder Coating, External Coating of Can: Epoxy
Polyster Powder coating Sheet Metal Thickness: 4.0 MM with 1
Year Warranty etc.complete.
Fire Safety 55.44 FIRE Providing 9 Liters Fire Extinguisher,Water Type, Stroed As Directed Each
Pressure Type Pressure Gauge Gross Weight : 14.6 kg, Empty By The
fire, A Rating 13A, Can construction: Deep drawn & co.,Mig
Welded, Valve construction : Forging and Machining, Internal
Coating of Can : Epoxy Powder Coating, External Coating of
Can: Epoxy Polyster Powder coating Sheet Metal Thickness: 2.0
MM ISI and EN Approved, with 1 Year Warranty etc.complete.
Fire Safety 55.45 FIRE Providing 50 Liters Fire Extinguisher,Water Type,External As Directed Each
Cartridge Type Pressure Gauge,Gross Weight : 102 kg, Empty By The
Weight : 52 kg, Can Height : 1192 MM, Diameter 300 MM, Engineer In-
mechanism, Range minimum 10 meters, Applicable on Class A
& B fire, Can construction: Deep drawn & Co2.,Mig Welded,
Can : Epoxy Powder Coating, External Coating of Can: Epoxy
Polyster Powder coating Sheet Metal Thickness: 4.0 MM with 1
Year Warranty etc.complete.
Fire Safety 55.46 FIRE Providing Water Mist 9 liters Fire Extinguisher Gross As Directed Each
Weight:23.9 kg Weight of the Empty fire fighting system By The
without compressed air bottle and bottle value 13.7 kg. Can Engineer In-
Hight: 611 MM, Diameter: 175 MM, Weight of the Gun: 1.0 kg, Charge
Nominal charg 9 liter recoil-approx. 10 N extinguishing Media
Flow-0.23/ sec, Water Discharge Hose-13 MM, Compressed air
to Gun-10MM, applicable on Class A,B & electrically started
Fire, A Rating 55A, B Rating 233B, Compressed Air Bottle
(volume/*pressure)2L/300 bar, Operating Range Approx 12.0 M
,Opreation Time approx 40 Sec. Extinguishing ehnancement
agent-foam additive, EN and ERDA approved Sheet Metal
Thickness ( SS 316 Ti)-1.5 MM with 1 year Warranty
etc.complete.
per unit) unit)
Fire Safety 55.47 FIRE Providing Water Mist 50 liters Fire Extinguisher Gross As Directed Each
Weight:92 kg Weight of the Empty fire fighting system without By The
compressed air bottle and bottle value 42 kg. Can Hight: 1192 Engineer In-
MM, Diameter: 300 MM, Weight of the Gun: 1.0 kg, Nominal Charge
charg 50 liter recoil-approx. 10 N extinguishing Media Flow-
0.31/ sec, Water Discharge Hose-13 MM, Compressed air to
Gun-10MM, applicable on Class A,B & electrically started Fire,
A Rating 55A, B Rating 233B, Compressed Air Bottle
(volume/*pressure)6L/300 bar, Operating pressure (dynamic)-
approx, 5.0 bar ,Opreation Time approx 160 Sec. Extinguishing
ehnancement agent-foam additive, EN and ERDA approved
Sheet Metal Thickness ( SS 316 Ti)-2 MM with 1 year Warranty
etc.complete.
Fire Safety 55.48 FIRE Providing Carbon Composite Cylinder 2 kg (For 9 liters Water As Directed Each
Mist Extinguisher) Without Gas Filling etc.complete. By The
Engineer In-
Charge
Fire Safety 55.49 FIRE Providing Mild Steel Cylinder 6 kg (For 50 ltrs Water Mist As Directed Each
Extinguisher) Without Gas Filling etc.complete. By The
Engineer In-
Charge
Fire Safety 55.50 FIRE Providing QRS:2 Kg- Direct Low Pressure System-Gross As Directed Each
Weight 3.98 kg Empty Weight :1.98 Can Height : 333 MM, By The
Diameter 108 MM, Can construction: Deep drawn , Valve Engineer In-
construction : Forging and Machining,External Construction: Charge
Epoxy powder Coating, Sheet Metal Thickness: 1.60 MM 1 year
Warranty Valve : Nickel Plated, With Integrated Ball Valve,
Integrated Position Control for ball valve open close,
Extinguishing Clean Agent NAF S 125, zero ODP, Stored
Pressure Fitted With pressure Gauge, Control Panel having
Monitoring LED's for AC Power System On , Discharged, valve
Closed, Valve Open, Pressure Healthy LED Red . Strobe Amber
for Fire , OLED Graphic Display 95 X 16, Battery Backup, 3
Outpus Using Potential Free Relaycontact,Audio Output using
Piezo buzzer, 4 meter Sensor tube UV Resistance with
Pressurization of Tube easing Nitrogen Gas, End of Line Plug 1
Pc, End of Line adapter i Pc, T Connection/Elbow/Straight
Connection 1 Pc. Pressure Switch M 10X1, Switchpoint 15 Bar-
1Pc Tube Attachment 6 Pc etc.complete.
Weight 7 kg Empty Weight :3 Kg Can Height : 413 MM, By The
Closed, Valve Open, Pressure Healthy Strobe Red Strobe
Amber, OLED Graphic Display 95 X 16, Battery Backup, 3
1Pc Tube Attachment 8 Pc etc.complete.
per unit) unit)
Weight 9.42 kg Empty Weight :3.42 Kg Can Height : 460 MM, By The
1Pc Tube Attachemnt 10 Pc etc.complete.
Fire Safety 55.53 FIRE Providing QRS: 9 Kg- Direct Low Pressure System-Gross As Directed Each
Weight:14.53 kg Empty Weight :5.53 Kg Can Height : 590 MM, By The
Extinguishing Clean Agent HCFC-123, Stored Pressure Fitted
With pressure Gauge, Control Panel having Monitoring LED's
for AC Power System On , Discharged, valve Closed, Valve
Open, Pressure Healthy Strobe Red Strobe Amber, OLED
Graphic Display 95 X 16, Battery Backup, 3 Outpus Using
Potential Free Relaycontact,Audio Output using Piezo buzzer, 3
meter Sensor tube UV Resistance with Pressurization of Tube
easing Nitrogen Gas, End of Line Plug 1 Pc, End of Line adapter
i Pc, T Connection/Elbow/Straight Connection 1 Pc. Pressure
Switch M 10X1, Switchpoint 15 Bar-1Pc Tube Attachemnt 6 Pc
etc.complete.
per unit) unit)
Weight 7 kg Empty Weight :3 Kg Can Height : 413 MM, By The
etc.complete.
Weight 9.42 kg Empty Weight :3.42 Kg Can Height : 460 MM, By The
Switch M 10X1, Switchpoint 15 Bar-1Pc Tube Attachemnt 10
Pc etc.complete.
Fire Safety 55.57 FIRE Providing QRS: 9 Kg- Direct Low Pressure System-Gross As Directed Each
Weight:14.53 kg Empty Weight :5.53 Kg Can Height : 590 MM, By The
Switch M 10X1, Switchpoint 15 Bar-1Pc Tube Attachemnt 12
Pc etc.complete.
per unit) unit)
Diameter 108 MM, Can construction: Hot Spinning/Heat Engineer In-
Treatment, Valve construction : Forging and Machining,External Charge
Construction: Epoxy powder Coating, Sheet Metal Thickness:
4.2 MM 1 year Warranty Valve : Brass,Cylinder thread: 25 E
Dip thread M10X1, OutLet Thread: W21 X 8X1/14'' Bursting
Disc: 250 bar , Integrated Position Control for valve open close,
Extinguishing Agent Co2 Controle Panel having,Monitoring
LED's for AC Power System On , Discharged, valve Closed,
Valve Open, Pressure Healthy Strobe Red Strobe Amber, OLED
1 Pc, T Connection/Elbow/Straight Connection 1 Pc. Pressure
etc.complete.
Fire Safety 55.59 FIRE Providing QRS:4.5 Kg- Direct Low Pressure System-Gross As Directed Each
Weight 14.73 kg Empty Weight : 13.23 Can Height : 735 MM, By The
3.5 MM 1 year Warranty Valve : Brass,Cylinder thread: 25E
Dip Tube Threading M10 X1, OutLet Thread: W21 X 8X1/14''
Bursting Disc: 250 bar , Integrated Position Control for valve
open close, Extinguishing Agent Co2 Controle Panel having,
Pc, End of Line adapter 1 Pc, T Connection/Elbow/Straight
Diameter 139.7 MM, Can construction: Hot Spinning/Heat Engineer In-
per unit) unit)
Fire Safety 55.62 FIRE Providing Escape Singage: Photoluminescent rigid plastic, 2 As Directed Each
MM thickness, printed on high quality glass paint with UV By The
resistance, 5 years warranty material Used-Non Radiocactive, Engineer In-
non-phosphorous, non toxic and lead free available in different Charge
types & sizes, time after removing the light source (in minutes):
60 minutes, Luminescent Intensity (Milicandelas*per square
meter-mcd/sqm):30 mcd/sqm. luminescent intensity greater than
0.32 mcd/sqm, period of Light Decay*(in Minutes):3100
etc.complete.
Fire Safety 55.63 FIRE Providing Escape Gear, Mild Steel Box size 425MM X 360 MM As Directed Each
X 140 MM, Epoxy powder coated to protect it from weathering, By The
smoke hood Tested to European Standard UN 403:1993-S Engineer In-
Known to reduce Carbon monoxide, propenal (acrolein) Charge
hydrogen choloride, hydrogen cyanide and solid & liquid toxic
particles to manageable level for at least 15 minutes, shall
withstand temperatures upto 80 Dug, Single use only, Fire
Blanket: Size 1.2 M X 1.8 M, used to cover any vessel
containing the fire completely, Used to extinuish a clothing fire
wrap blanket around victim etc.complete.
Report Name: e DSR
per unit) unit)
Building 56.01 BDW 8-2 Removing double country tiled roof with ridge and with battens Bd.W.8 Page Square 41.00 41.00
maintenance and stacking the materials as directed with all leads and lifts, No. 587 Meter
complete including removing wood work below etc. complete.
Building 56.02 BDW 8-4 Removing planking from roof or ceiling and stacking them as Bd.W.8 Page Square 21.00 20.00
maintenance directed with all leads and lifts etc. complete. No. 587 Meter
Building 56.03 BDW 8-5A Removing Queen Post truss from roof and stacking the materials Bd.W.8 Page Number 245.00 245.00
maintenance as directed with all leads and lifts etc. complete. No. 587
Building 56.04 BDW 8-5B Removing King Post truss from roof and stacking the materials Bd.W.8 Page Number 272.00 272.00
maintenance as directed with all leads and lifts etc. complete. No. 587
Building 56.05 BDW 8-5C Removing Other type truss below 5 metres span from roof and Bd.W.8 Page Number 200.00 200.00
maintenance stacking the materials as directed with all leads and lifts etc. No. 587
complete.
Building 56.06 BDW 8-8 Dismantling flat wooden or A.C. sheet ceiling with frame work Bd.W.8 Page Square 23.00 23.00
maintenance including stacking the materials as directed with all leads, lifts No. 587 Meter
etc. complete.
Building 56.07 BDW 8-9 Removing cloth ceiling including frame work and stacking the As directed Square 12.00 12.00
maintenance materials as directed with all leads, lifts etc. complete. by Engineer Meter
in charge.
Building 56.08 BDW 8 Dismantling brick masonry in Mud and stacking the materials as As directed Cubic 117.00 117.00
maintenance directed with all leads lifts etc. complete. by Engineer Meter
in charge.
Building 56.09 BDW 8 Dismantling brick masonry in lime or cement mortar and As directed Cubic 129.00 129.00
maintenance stacking the materials as directed with all leads, lifts etc. by Engineer Meter
complete. in charge.
Building 56.10 BDW 8 Dismantling stone masonry in mud including stacking the As directed Cubic 117.00 90.00
in charge.
Building 56.11 BDW 8 Dismantling stone masonry in lime or cement mortar including As directed Cubic 162.00 162.00
Building 56.12 BDW 8 Removing lime or lean cement concrete including stacking the As directed Cubic 297.00 199.00
maintenance spoils as directed with all leads, lifts etc. complete. by Engineer Meter
in charge.
Building 56.13 BDW 8 Removing rich mix cement concrete including stacking the As directed Cubic 415.00 406.00
in charge
Building 56.14 BDW 8 Removing brick bat coba including stacking the spoils as As directed Cubic 121.00 118.00
maintenance directed with all leads, lifts etc. complete. by Engineer Meter
in charge.
Building 56.15 BDW 8 Removing doors and windows with frames and stacking the As directed Number 61.00 59.00
maintenance materials as directed with all leads, lifts etc. complete. by Engineer
in charge.
Building 56.16 BDW 8 Removing ventilators and small windows with frame and As directed Number 61.00 59.00
maintenance stacking the materials with all leads lifts etc. complete. by Engineer
in charge.
Building 56.17 BDW 8 Removing wooden or A.C. partition including frame work and As directed Square 14.00 14.00
maintenance stack-ing the materials as with all leads, lifts etc. complete. by Engineer Meter
in charge.
Building 56.18 BDW 8 Removing teak wood trellies work with frame including As directed Square 12.00 12.00
Building 56.19 BDW 8 Removing cement tiles, or marble or polished shahabad floor or As directed Square 22.00 22.00
maintenance dado without bed concrete including stacking the materials as by Engineer Meter
directed with all leads, lifts etc. complete. in charge
Building 56.20 BDW 8 Removing Shahabad or Tabdur stones from floor without bed As directed Square 22.00 22.00
maintenance concrete including stacking the materials as directed with all by Engineer Meter
leads, lifts etc. complete. in charge.
Building 56.21 BDW 8 Dismantling wooden floor including beams and joists, stacking As directed Square 19.00 13.00
maintenance the materials as directed with all leads, lifts etc. complete. by Engineer Meter
in charge.
per unit) unit)
Building 56.22 BDW 8 Removing cement or lime plaster including disposing of the As directed Square 12.00 13.00
in charge.
Building 56.23 BDW 8 Removing mud plaster including disposing of the spoils as direct- As directed Square 6.00 6.00
maintenance ed with all leads, lifts etc. complete. by Engineer Meter
in charge.
Building 56.24 BDW 8 Removing wire fencing with wooden post and stacking the As directed Running 8.00 8.00
maintenance material with all leads, lifts etc. complete. by Engineer Meter
in charge.
Building 56.25 BDW 8 Removing wire fencing with iron/C.C. fencing posts and As directed Running 10.00 10.00
Building 56.26 BDW 8 Removing iron pipe railing having wooden R.C.C. or C.C. or As directed Running 10.00 10.00
maintenance iron posts and stacking the materials as directed etc. complete. by Engineer Meter
in charge.
Building 56.27 BDW 8 Removing earthen, stoneware pipes and stacking them as As directed Running 9.00 9.00
maintenance directed with all leads, lifts etc. complete. by Engineer Meter
in charge.
Building 56.28 BDW 8 Removing cast iron or wrought iron or A.C. pipe and stacking As directed Running 9.00 9.00
maintenance them as directed with all leads, lifts etc. complete. by Engineer Meter
in charge.
Building 56.29 BDW 8 Dismantling the R.C.C. work 1:2:4 and sorting out the materials As directed Cubic 615.00 615.00
maintenance such as steel etc. as directed and stacking them within the by Engineer Meter
specified lead as directed etc. complete. in charge.
Building 56.30 BDW 8 Removing Np-2 and Np-3 class pipes including stacking at road As directed Running 150.00 70.00
maintenance side as directed by the Engineer in charge. Upto 900mm dia. etc. by Engineer Meter
Building 56.31 BDW 8 Removing Np-2 and Np-3 class pipes including stacking at road As directed Running 175.00 100.00
maintenance side as directed by the Engineer in charge. 900mm dia. and by Engineer Meter
above. etc. complete. in charge.
Building 56.32 BDW 8 Removing single country tiled roof with battens and stacking the As directed Square 34.00 33.00
maintenance materials as directed with all leads and lifts etc. complete. by Engineer Meter
in charge.
Building 56.33 BDW 8 Removing battens from roof and stacking them as directed with As directed Running 4.00 4.00
maintenance all leads and lifts etc. complete. by Engineer Meter
in charge.
Building 56.34 BDW 8 Removing matting from roof and stacking as directed with all As directed Square 3.00 3.00
maintenance leads and lifts etc. complete. by Engineer Meter
in charge.
Building 56.35 BDW 8 Removing purlins from roof including stacking as directed with As directed Running 6.00 6.00
maintenance all leads, lifts, etc. complete. by Engineer Meter
in charge.
Building 56.36 BDW 8 Removing rafters from roof including the materials as directed As directed Running 5.00 5.00
maintenance with all leads, lifts, etc. complete. by Engineer Meter
in charge.
Building 56.37 BDW 8 Removing cloth partition with frame work and stacking the As directed Square 2.50 2.50
in charge.
Building 56.38 BDW Providing and fixing Jute Kanthan (Tarat) screen to the scaffold- As directed Square 4.80 25.00
maintenance ing for external guniting as directed including removing the by Engineer Meter
same after the work is over etc. complete. in charge
Building 56.39 BDW Providing and erecting chain link fencing 1.6 M. height with As directed Running 1740.00 124.00
maintenance G.I. chain link of size 50 x 50 mm 8 guage thick and fixed 75 by Engineer Meter
mm above Ground level on vertical M.S Angle of 40 x 40 x 6 in charge.
mm size including excavating pits for foundation and embedded
in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75
M.c/c with iron bar 16 mm dia as hold fast including welding
link with angle frame at 30 cm c/c with nuts and bolts and
horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size
and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal
including cross support of 40 x 40 x 6 mm Angles both sides at
every corner or bends embedded in concrete blocks of 1:4:8 of
size 450 x 450 x 670 mm including 3 coats of oil painting etc.
complete.
per unit) unit)
Building 56.40 BDW Removing Urinal Pans or Wash hand basin with frame including As directed Number 50.00 48.00
maintenance disconnecting the sanitary and water supply connections. by Engineer
removing the same carefully and stacking the serviceable in charge.
materials as and where directed including throwing the
unserviceable materials out side etc. complete.
Building 56.41 BDW Removing W.C. Pan including disconnecting the sanitary and As directed Number 105.00 104.00
maintenance water supply connections, removing and breaking flooring and by En-gineer
bed con-crete around pan removing the same carefully and in charge.
stacking the service-able materials as and where directed
including throwing the unserviceable materials out side etc.
complete.
Building 56.42 BDW Dismantling existing brick bat coba in the W/C and toilets As directed Number 975.00 975.00
maintenance including removing the dismantelled stuff outside the rooms, by Engineer
including stacking and cleaning surface etc. complete. in charge.
Building 56.43 BDW Removing Manglore tiled roof and ridge tiles with battens, ridge As directed Square NA NA
maintenance and barge boards, eaves 8 A boards etc. and stacking the by Engineer Meter
materials as directed with all leads and lifts complete. Including in charge.
removing wood work below etc. complete.
Building 56.44 BDW Providing and erecting 1.5 metre high wire fencing with seven Bd.W.3 Page Running 445.00 53.00
maintenance rows of barbed wire supported on M.S. Angles (50 mm x 50 mm No. 583 Meter
x 6mm) at 2.5 Metres, centre to centre including excavating pits
for foundation, fixing post in cement concrete of size 45 x 45 x
45 cm., fastening the wire and painting the M.S. Angles with
one coat of red lead primer and two coats of painting etc.
complete.
Building 56.45 BDW Providing and Erecting 1.5 Metre high wire fencing with seven Bd.W.4 Page Running 435.00 60.00
maintenance rows of barbed wire supported on precast poles of specified size No. 583 Meter
at 2.5 M. C / C including excavating pits for foundation, fixing
posts in cement concrete 1:4:8 block of concrete of size 45 x 45
x 45 cm. fastening the wire and
coal tarring wooden post in two coats etc. complete.

DSR 2017-18-1

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

DSR 2017-18-1

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

DSR 2017-18-1

Uploaded by

Copyright:

Available Formats

Report Name: e DSR

Date Of Printing: 05-05-2017

Reinforced 36.45 BDF 19 Item of red book is to be taken 0 0 NA NA

Oil Painting 45.17 0 0 0 0 NA NA

You might also like