IEC 61850 Description IEC61850 is an important new international standard for substation automation that will have a very

significant impact on how electric power systems are designed and built for many years to come. IEC61850 is a part of the International Electrotechnical Commissions (IEC) Technical Committee 57 (TC57) architecture for electric power systems. The model-driven approach of the TC57 standards, including IEC61850, is an innovative approach that requires a new way of thinking about substation automation that will result in very significant improvements in both costs and performance of electric power systems. SISCOs IEC61850 Tutorial takes a practical approach to helping utility engineers understand how IEC61850 can be used to benefit their organization. The tutorial begins by explaining why these standards are important, how they differ from legacy technology, and how these differences will benefit users. The student is then guided through the IEC61850 standard itself to illustrate how IEC68150 delivers these benefits via standardized device, object, and service models. Definitions and overviews of the most important concepts will be presented with detailed examples that relate to actual power systems. The tutorial is concluded with a hands-on session in which the attendees will install and configure an actual IEC61850 application and network analysis software on their own laptop computers and communicate over an Ethernet network with an IEC61850 server. Detailed Outline 1. Day 1 1.1. Agenda Review 1.2. What is IEC61850? 1.3. Why Standards are Needed 1.3.1. Interoperability and Integration 1.3.2. How Systems Evolved 1.3.3. Protocol Standards 1.3.3.1.Overview 1.3.3.2.Limitations of Legacy Protocols 1.3.3.3.New Approach of IEC61850 1.3.4. Application Programming Interface (API) Standards 1.3.4.1.Overview 1.3.4.2.Limitations of Legacy API Standards SISCO IEC61850 Tutorial Description and Detailed Outline Page 2 1.3.5. Data Modelling Standards 1.3.5.1.The Common Information Model (CIM) 1.3.5.1.1. Brief Review of IEC619780/IEC61968 1.3.5.2.The Generic Interface Definition 1.3.6. The IEC TC57 Model Driven Architecture for Electric Utility Integration 1.3.6.1.Applicability to Other Industries 1.3.6.2.Benefits 1.4. Comparison of DNP3 (IEC60870-5) and IEC61850 1.4.1. Comparison of the Origins 1.4.2. Comparison of Standard Structure 1.4.3. Comparison of Profiles 1.4.4. Comparison of Services 1.4.5. Conclusion

1.5. BREAK 1.6. Benefits of IEC61850 1.6.1. Keys to Justification 1.6.2. Substation Benefits 1.6.3. Substation to Control Center Benefits 1.6.4. Relay to Relay Interfacing Benefits 1.6.5. Transducer Wiring Benefits 1.6.6. Conclusion 1.7. IEC61850 Standard 1.7.1. How to Read 1.8. IEC61850 Technical Parts 1.8.1. Virtual versus Abstract 1.9. IEC61850 Server Object 1.10. IEC61850 Logical Devices 1.10.1. Application 1.11. LUNCH 1.12. Logical Nodes (LN) 1.12.1. Definition and Structure 1.12.2. Listing of Logical Nodes Defined in IEC61850 -2SISCO IEC61850 Tutorial Description and Detailed Outline Page 3 1.12.3. Logical Node Naming 1.13. Common Data Classes (CDC) 1.13.1. Base Types 1.13.2. Listing of Common Data Classes Defined in IEC61850 1.13.3. Functional Constraints 1.13.4. Detailed Review of CDCs: 1.13.4.1. Single Point Status (SPS) 1.13.4.1.1. Trigger Options 1.13.4.1.2. Mandatory/Optional Parameters 1.13.4.2. Double Point Status (DPS) 1.13.4.3. Integer Status (INS) 1.13.4.4. Controllable Double Point (DPC) 1.13.4.5. Controllable Integer (INC) 1.13.4.6. Protection Activation (ACT) 1.13.4.7. Measured Value (MV) 1.13.4.8. Device Name Plate (DPL) 1.13.4.9. Logical Node Name Plate (LPL) 1.14. BREAK 1.15. Logical Node Descriptions and Example Object Names 1.15.1. Physical Device LN (LPHD) 1.15.2. Common Logical Node (LLN0) 1.15.3. Circuit Breaker (XCBR) 1.15.3.1. Local/Remote Operation Status Object Name 1.15.3.2. Breaker Position Object Name 1.15.3.3. Mapping to IEC61850-8-1 (MMS) Names 1.15.4. Switch Controller (CSWI) 1.15.5. Measurements (MMXU) 1.15.5.1. Complex Measured Values (CMV) 2. Day 2 2.1. Abstract Communications Service Interface (ACSI)

2.1.1. ACSI Service Model 2.1.2. ACSI Objects and Mapping to MMS per IEC61805 -8-1 2.1.3. ACSI Services -3SISCO IEC61850 Tutorial Description and Detailed Outline Page 4 2.1.4. ACSI Server Object 2.1.4.1.Application Communication Model 2.1.5. Logical Device Object and Services 2.1.6. Logical Node Object and Services 2.1.7. Data Object and Services 2.1.8. ACSI Service Mapping 2.1.9. Data Set Object and Services 2.1.10. Reporting Model 2.1.10.1. Unbuffered Reports 2.1.10.2. Buffered Reports 2.1.11. Control Model 2.1.11.1. Direct Control 2.1.11.2. SBO Control 2.1.11.3. Control with Enhanced Security 2.1.11.4. IEC61850-9-1 Mapping of Controls to MMS 2.1.11.5. Examples 2.1.11.5.1. Select Before Operate 2.1.11.5.2. Select with Value 2.2. BREAK 2.3. IED to IED Data Exhange 2.3.1. Multi-cast Messaging Model 2.3.2. Generic Substation Status Event (GSSE) 2.3.3. Generic Object Oriented Substation Event (GOOSE) 2.3.4. Reliable Multicast 2.4. Substation Configuration Language (SCL) 2.4.1. Overview and Application 2.4.2. File Types 2.4.3. Sample SCL File 2.4.4. SCL Future 2.5. IEC61850-9-2 Process Bus 2.5.1. Sampled Measured Values (SMV) Objects and Services 2.5.2. Application 2.6. IEC61850 Profiles 2.7. UCA2.0 to IEC61850 Migration -4SISCO IEC61850 Tutorial Description and Detailed Outline Page 5 2.7.1. Comparison of the Documents and Terminology 2.7.2. Migration Issues 2.7.2.1.Object Models 2.7.2.2.Reporting 2.7.2.3.Client Report Handling 2.7.2.4.Object Name Changes 2.8. UCA International Users Group 2.8.1. Organization 2.8.2. Process 2.8.3. Benefits

2.9. LUNCH 2.10. Hands-On: Using IEC61850 2.10.1. SISCO IEC61850 Products 2.10.1.1. MMS-EASE Lite For Embedded Systems 2.10.1.2. AX-S4 MMS IEC61850 Client/Server for Windows 2.10.1.2.1. Architecture 2.10.1.2.2. Application 2.10.1.2.3. Future 2.10.2. Installing and Configuring AX-S4 MMS 2.10.2.1. Hands-On 2.10.3. Ethernet Network Analysis using Etherreal 2.10.3.1. Hands-On 2.11. Conclusion Duration: 2 days

rotocol Converter/Gateway
Protocol converter/gateway supporting a lot of protocols and custom defined protocols. Providing embedded protocol converter module and independent device. Supporting network and RS232/RS485 . The protocols that are currently available include:
y y y y y y y y y y y y

IEC 61850 / UCA2.0 IEC 60870-5-101 IEC 60870-5-102 IEC 60870-5-103 IEC 60870-5-104 DNP3,DNP/TCP ICCP / TASE.2 (IEC 60870-6) MMS (ISO 9506) Modbus/RTU,Modbus/TCP N4F CDT SC1801 Ethernet Port Flash SRAM Backup Battery 10Base-T 256K 128K Connection for user-supplied battery (to support RTC and SRAM)

26 parallel I/O include: 16 configurable I/O General Purpose I/O 7 fixed inputs 3 fixed outputs Additional Inputs Additional Outputs Memory I/O embedded protocol converter module 2 Startup Mode, Reset Status, Reset 4 address, 8 data, plus I/O ReadWrite Four 5 V CMOS-compatible, 2 configurable as clocked ports (1 clocked line available only on programming header) Max. burst rate = CLK/32 Max. sustained rate = burst/2 Two 2 x 13, 2 mm IDC headers Slave port permits use as master or as intelligent peripheral with other master controller Yes

Serial Ports

Serial Rate Connectors Slave Interface Real-Time Clock

Timers

Five 8-bit timers (four cascadable from the first) and one 10-bit timer with 2 match registers 4.75-5.25 V DC, 134 mA -40 to +70C 5-95%, non-condensing 2.3" x 1.6" x 0.86" (59 x 41 x 22 mm) IEC 60870-5-101 IEC 60870-5-102 IEC 60870-5-103 IEC 60870-5-104 DNP3,DNP/TCP Modbus/RTU,Modbus/TCP N4F CDT SC1801 1 module + 2 protocols 1-99Set $180 100-499Set 10%OFF 500-999Set 20%OFF 1000-4999 30%OFF 5000+ 40%OFF

Watchdog/Supervisor Yes Power Operating Temp. Humidity Board Size

Supportting Protocols

Price and discouts