Scribd
Upload
188 views2 pages

Modbus Controller (2080 Serialisol)

Uploaded by

Piyush Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
188 views2 pages

Modbus Controller (2080 Serialisol)

Uploaded by

Piyush Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

52 Micro800 Programmable Controller Family Selection Guide

Micro800 Plug-in Modules and Accessories – Features and Compatibility


Plug-in / Accessory Supported by Supported by Supported by Feature
Micro810 Micro820 Micro830/Micro850
1.5" LCD and Keypad Yes No No • backup module for Micro810 controllers
2080-LCD
• configure Smart Relay Function Blocks
Micro810 USB Adapter Yes No No USB programming access
2080-USBADAPTER
External Power Supply Yes Yes Yes optional controller power supply
2080-PS120-240VAC
RS232/485 Isolated Serial Port No Yes Yes • adds additional serial communications with
2080-SERIALISOL Modbus RTU and ASCII protocols
• isolated for increased noise immunity
Digital Input, Output, Relay, and No Yes Yes • 4-channel inputs/outputs or combination
Combination Modules modules
2080-IQ4, 2080-IQ4OB4, 2080-IQ4OV4,
2080-OB4, 2080-OV4, 2080-OW4I • configurable as voltage and current inputs
• sink or source output
• 4-channel relay outputs
High Speed Counter No Yes Yes • Up to a minimum of 250 KHz differential line
2080-MOT-HSC driver for improved noise immunity and
additional dedicated I/O
• One Quadrature (ABZ) differential inputs
alternately configurable for pulse internal, pulse
with external direction, A-up and B-down input
configurations, and quadrature mode
• User-configurable minimum and maximum
values, preset, and Z operation
DeviceNet Scanner No Yes Yes • Scanner mode – scan devices such as
2080-DNET20 CompactBlock™ LDX, PowerFlex® drives,
overloads and sensors
Remote LCD No Yes No • Operator interface for configuring such settings
2080-REMLCD as IP address on Micro820 controller
• With RS232 and USB ports
Non-isolated Unipolar Analog No Yes Yes • adds up to 20 embedded analog I/O with 12-bit
Input/Output resolution (with 48-point controllers)
2080-IF2, 2080-IF4, 2080-OF2
• 2 channels for 2080-IF2, 2080-OF2
• 4 channels for 2080-IF4
Non-isolated Thermocouple No Yes Yes • for temperature control, when used with PID
2080-TC2
• 2 channels for 2080-TC2 and 2080-RTD2
Non-isolated RTD No Yes Yes
2080-RTD2
Memory Module with RTC No No Yes • backup project data and application code
2080-MEMBAK-RTC
• high accuracy real-time clock
6-Channel Trim Potentiometer No Yes Yes adds six analog presets for speed, position and
Analog Input temperature control
2080-TRIMPOT6

Publication 2080-SG001D-EN-P - December 2013


Micro800 Programmable Controller Family Selection Guide 57

Memory Backup and High Accuracy RTC Plug-In (2080-MEMBAK-RTC)

Specifications (2080-MEMBAK-RTC)
Mounting Terminal Operating Non-operating Surrounding North
torque screw torque temperature temperature air, max American
temp code
0.2 Nm 0.22....0.25 Nm -20...65 °C -40...85 °C 65 °C T4
(1.48 lb-in) (1.95…2.21 (-4…149 °F) (-40…185 °F) (149 °F)
lb-in.) using a 2.5
mm (0.10 in.)
flat-blade
screwdriver

RS232/485 Serial Port Plug-in (2080-SERIALISOL)

Specifications (2080-SERIALISOL)
Mounting Terminal screw torque Wire size Isolation
torque voltage
0.2 Nm 0.22…0.25 Nm Solid: 500V AC
(1.48 lb-in) (1.95…2.21 lb-in) 0.14…1.5 mm2 (26…16 AWG)
using a 2.5 mm Stranded:
(0.10 in.) flat-blade 0.14…1.0 mm2 (26…18 AWG)
screwdriver rated @ 90 °C (194 °F ) insulation max

Operating temperature Non-operating Surrounding air, max North American


temperature temp code
-20...65 °C (-4…149 °F) -40...85 °C 65 °C (149 °F) T4
(-40…185 °F)

Publication 2080-SG001D-EN-P - December 2013

You might also like