Performance Data Sheet

FF5782
NanoNet™ Fuel Filter

Description Features
Cummins® FF5782 Fuel Filter's new NanoNet™ NanoNet™ Media – Consistent pore size
high-performance filtration media reduces the throughout this unique media retains captured
number of harmful particles reaching the engine's particles during engine vibration better than any
fuel injectors, resulting in reduction in equipment competitive product.
downtime and lower Total Cost of Ownership (TCO).
Fully Synthetic Media – NanoNet media contains
It has a twice the contaminant holding capacity of
no glass and is not subject to water saturation.
conventional filters and was designed to deliver fuel
that meets FIE manufacturers' suggested ISO 12/9/6
cleanliness level. Its unique design delivers maximum Benefits
engine life with best-in-class protection and longer
■■ 13X reduction in hard particle penetration fully
filter life, minimizing your operating costs.
protects the fuel injector against progressive
damage, leading to longer life
■■ 2X the contaminant holding capacity of
conventional filters
■■ Minimal operating costs with up to 60% savings
in Total Cost of Ownership (TCO)
■■ Exceeds 99.9% filtration efficiency by trapping
any contaminants larger than four microns
■■ Maximum engine life with best-in-class fuel
injector protection
■■ Maintains advanced performance throughout the
life of the filter and performance doesn't decline
with age

Experience
■■ Field Experience
»» Off-highway 29,850 hours
»» On-highway 2.2 million miles
(3.5 million kilometers)
■■ Test Cell Experience
»» 71,000 hours
FF5782 NanoNet™ Fuel Filter

Specifications Performance
100,000X
Capacity (SAE J905) 55 g (0.21 lb)
Liquid Capacity 0.21 gal (0.8 L) Competitor A
10,000X
Rated Flow (SAE J905) Outside In 1.2 gal/min (4.6 L/min)

Particles/mL > Indicated Size

Competitor B
Gasket Inside Diameter 2.89" (73.5 mm) 1,000X
13X Better
Gasket Outside Diameter 3.19" (80.94 mm) Competitor C
Overall Height 7.17" (182.11 mm) 100X

Largest Outside Diameter 4.01" (101.96 mm) FF5782

featuring NanoNet™
10X
Multipass Particle Size Specification
4 micron Vibration Vibration
(ISO 4572)
0
Particle Size at Beta 1000 (Multipass) 4 micron (c) Test Time (min)

Diesel Metering Valve (DMV) Seat

Fluid out

1 particle >5 microns

(downstream of filter)

Field Failure Dust in Fuel Dust in Fuel

After teardown Testing with Testing with
observation competitor media NanoNet media
(after 50 hours) (no failure
after 50 hours)

Fuel Flow Fluid in

Inner Outer
NanoNet NanoNet
Element Element 10 particles >5 microns
(upstream of filter)

Installation Tips
■■ Installation instructions are provided on the filter.
■■ Always pre-fill with clean fuel on the “dirty” side of the
filter with the pre-fill cap ON.
■■ Always clean and oil the gasket before installation. Do
NOT use grease.
■■ After installing a new filter, start the engine and wait for
a few minutes, then check for leaks.

Inlet Inlet
Outlet

For more detailed information, refer to the Fleetguard

Technical Information Catalog – LT32599 or
For more information, visit
visit Fleetschool at cumminsfiltration.com. To cumminsfiltration.com

find the nearest retailer of Fleetguard products, visit PD10015

©2012 Cummins Filtration Inc.
cumminsfiltration.com/wrl. Printed in USA on Recycled Paper