Chapter NoPracticals Time

3 Showing a coaxial cable by cutting the sheath 15 mins done

Showing a UTP cable by cutting with the help of wire stripper 15 mins done
show BNC and BNC T connector 5 mins done check how to connect BNC connector
show various types of UTP cable 15 mins done
Show RJ45 connector 5 mins done
show fiber optic cable (MM) 5 mins done
4 show a 10BaseT network by using a hub and show collision 25 mins done
5 show a 100BaseT network by using a switch 20 mins done try
configure a NIC to operate in full duplex mode 10 mins done
6 Show fiber optic NIC 5 mins done
7 show various lights on NIC and switch and hub 20 mins done try to purchase
show various types of NICs (10BaseT, 10 BaseT with BNC connector, 100 Base 20 mins search for old NIC
show how to check the MAC address from command prompt 10 mins done
NIC configuration 10 mins done
troubleshooting NIC by the help of ping command (self ping and ping to other co 10 mins done
discuss about various network related problems and troubleshoot at the client en 10 mins
8 show LMHOSTS file 10 mins done
Install NetBIOS/NetBEUI 10 mins done
Show arp entries from command prompt 10 mins done
Configure IPX/SPX 10 mins done
9 Show how to configure an IP address 10 mins done
determine the type of IP address 10 mins done
show how to calculate a subnet mask 15 mins done
show tracert and pathping command 10 mins done
exercise on VLSM 15 mins
10 show how to cascade switches and use one switch and multiple hubs to expand 20 mins done try arrange the devices
show how to use the netstat and route print to see the routing table 10 mins done
show how to configure gateway 10 mins done
discuss troubleshooting 10 mins done
11 show how to pull a CAT5 cable 15 done
installing a DB connector 10 done
to connect a 210 patch plug 10 done
show varoius tools 20 done
to crimp a CAT5 cable 20 done
punching on the modular outlet 30
 connecting to the I/O 10 done
connecting to the jack panel 30 done
creating a straight through and cross over cable 20 done
to create a shielded patch cable and test 20 done
how to measuer E to N voltage 10 done
installation of racks 30 done Arrange and see
managing and labeling the cables 20 done

12 Show wireless components (AP, antenna, and adapter) 20 mins

how to configure adhoc mode 15 mins
How to configure infrastructure mode 20 mins
troubleshooting 10 mins
13 configure DNS, DHCP at client end 15 mins
configure WINS on a client PC 10 mins
troubleshoot DNS related problem by the help of ipconfig/flushdns command 10 mins
use of nbtstat command to troubleshoot WINS 10 mins
14 show ftp command from command prompt 10 mins
configure NNTP in outlook express 10 mins done
install SNMP and configure SNMP service 15 mins done see for a network monitor s/w who asks for S
show telnet command 10 mins
install mozilla firefox 10 mins not done
15 Install winproxy 10 mins not done
configure a proxy server at client computer 10 mins done
show how to configure TCP/IP 10 mins done
show netsh command 10 mins done
IE configuration 20 mins done
create an email account in MS Outlook and configure exsiting account 15 mins done
create an email account in Outlook express and configure exsiting account 15 mins done
Configure NetBIOS 10 mins done
Use of Ipconfig/release and renew comand 10 mins done
troubleshooting DNS using nslookup 10 mins done
use repair option from LAN properties tab 10 mins done
16 No practicals
17 IR communication by the help of 2 laptops 15 mins Arrange
how to configure VPN at client PC 10 mins setup
create a dial up network 10 mins done
 configure ICS and troubleshoot 20 mins setup
troubleshoot remote access 10 mins
18 spybot installation 10 mins done
Zone Alarm Pro Installation 10 mins done
enable firewall in winxp 10 mins done
configure firewall exceptions 10 mins done
19 show how to perform a loopback test 10 mins done
show network monitor 10 mins done
show hardware troubleshooting tools 10 mins done
how to verify packet filtering in winxp 10 mins done
discuss network workstation troubleshooting process 10 mins
discuss network connectivity problem 10 mins
how to add DNS entry from TCP/IP properties 10 mins done
show netstat, ipconfig, arp -a, nbtstat and route command 10 mins done
troubleshoot TCP/IP 10 mins
troubleshoot TCP/IP from help and support 10 mins done

1095 45%
Total Lecture 22*110=2420
w to connect BNC connector

e the devices
network monitor s/w who asks for SNMP installation