7.

Level 2 Repair

7-1. Components on the Rear Case

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-2. Pre-requisite

Tweezers / Disass'y Stick / Screw Driver Anti-static Gloves

Anti-static Mat Hot Plate

A OCTA Disassembly Holder OCTA Disassembly Upper

Ethyl Alcohol Cotton Swab

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-3. Parts which must be changed after repair

BOM description & part code KIT CODE Image Remarks

A/S-SVC BACKGLASS
OUTSIDE TAPE

(Normal)
[GH81-16501A]

(Ceramic)
[GH81-16592A]

(Normal)
[GH82-18801A] Replace for

(Ceramic) Back Glass

[GH82-18802A]
A/S-SVC CAM SEALING
TAPE (Common)

[GH02-17605A]

Mic sealing tape

[GH02-07406A]

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-4. Disassembly

2 Detach the Back Glass. And Finger sensor

1 Put the device in the chamber as following 1) Detach the left side of Back glass
below heating condition 2) Detach the Finger sensor connector
- SOC 68%↓: 70℃/10~20 minute
- SOC 68%↑: 60℃/10~20 minute
※ Please confirm the heating condition
released lastly, and follow it.

※ Caution ※ Caution
Be care of scratch. Be care of scratch.

3 Unscrew 16 Point and disassemble SIM Tray 4 Disassemble Upper Rear.

from device. (Use disassemble hole left/right side of Rear to
detach it)

Rear Top disassemble hole.

※ Caution
※ Caution 1) Be care of scratch.
Be care of Rear damage. 2) Be care of Rear and connector damage.
3) Be care of NFC ANT damage.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

5 Finally Disassemble Rear of bottom side.

(Use disassemble hole right side of Rear to
detach it) 6 Unscrew PBA 3points.

※ Caution
1) Be care of scratch. ※ Caution
2) Be care of Rear and connector damage. Be careful not to damage the PBA.
3) Be careful not to damage the PBA.

7 Detach Battery connect and the other 8 Detach Front cam.

connectors. (4 Point)

※ Caution
※ Caution
1) Be care of scratch.
Be care of Front CAM / connector damage.
2) Be care of connector damage.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

9 Detach Ear JACK 10 Detach SUB PBA.

(Use disassemble point)

※ Caution ※ Caution
Be care of Ear jack connector. Be care of SUB PBA damage.

11 Detach Main CAM. 12 Detach RCV and Motor.

※ Caution ※ Caution
Be careful not to damage the Main CAM. Be careful not to damage the RCV/Motor.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-5. Assembly

1 Attach RVC,motor on Front.

2 attach Main CAM.

※ Caution ※ Caution
Be careful not to damage RVC,motor and Ear jack. Be careful not to damage the Main CAM.

3 Attach PBA. 4 Attach SUB cam.

Assemble connector.
Cam module.

3-2
3-1

4-1 4-2

※ Caution
※ Caution
1) Be care of assemble USB.
Be care of connector damage.
2) Be care of PBA damage.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

5 Attach Ear Jack. 6 Attach batt, UB,Ear Jack

(3 Point)

※ Caution ※ Caution
Be care of PBA/Ear jack damage. Be care of connector damage.

7 Screw PBA 3points. 8 Assemble the Bottom REAR in sequence.

8-2

8-1

8-3

※ Caution ※ Caution
Be careful not to damage the PBA. Be care of scratch and REAR damage.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

9 Assemble the TOP+MID REAR Assy in 10 Screw 16 Point and disassemble SIM Tray
sequence. from device.

9-1 9-2

※ Caution ※ Caution
Be care of scratch and REAR damage. Be care of Rear damage.

11 Attach the backglass 12 Press Back Glass.

Pressing force : 6.0kgf/cm2±3%
Pressing time : 8±0.3초

※ Caution ※ Caution
Be care of scratch and tilt. Be care of scratch.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.