7.

Level 2 Repair

7-1. Components on the Rear Case

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-2. Pre-requisite

Tweezers / Disass'y Stick / Screw Driver Anti-static Gloves

Anti-static Mat AOD

Ethyl Alcohol Cotton Swab

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-3. Parts which must be changed after repair

BOM description & part code Image Remarks

TAPE WP BACKCOVER Replace for

[GH02-22419A] Back Cover repair

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-4. Disassembly

1 Put the device in the chamber as following 2

below heating condition. Detach the Back Glass.
- SOC 68%↓: 70℃/10~20 minute Detach the left side of Back glass.
- SOC 68%↑: 70℃/10~20 minute
※ Please confirm the heating condition
released lastly, and follow it.

※ Caution ※ Caution
Be care of scratch Be care of scratch

4 Disassemble Upper Rear.

3 Unscrew 16 Point and disassemble SIM Tray (Use disassemble hole, left side of Rear to
from device detach it)

Rear Top disassemble hole.

※ Caution
※ Caution
1) Be care of scratch.
Be care of Rear damage.
2) Be care of Rear and connector damage.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

5 Finally Disassemble Rear of bottom side.

(Use disassemble hole, right side of Rear to 6 Unscrew Main PBA 1point.
detach it)

Rear Top disassemble hole.

※ Caution
1) Be care not to damage Battery. ※ Caution
2) Be care not to damage Rear, Connectors, PBA. Be careful not to damage the Main PBA and components.
3) Be careful of scratch.

7 Disassemble 2 point connectors and 2 point 8 Unscrew Sub PBA 1 point

cables of PBA and detach PBA

Main PBA disassemble hole (blue area)

※ Caution
※ Caution
1) Be care of scratch.
Be careful not to damage the Sub PBA and components.
2) Be care of connector damage.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

9 Disassemble 3 point connectors and 2 point 10 Detach other components.

cables of Sub PBA and detach Sub PBA.

- Detach Finger senor module

- Detach Sub PBA

※ Caution ※ Caution
Be care of Ear jack connector. Be care of SUB PBA damage.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

7-5. Assembly

1 Attach components on Front. Attach SUB PBA and Finger sensor module on
(RCV module, Motor, Battery) 2 Front.

Attach OCTA conn, Finger sensor conn, Main

Fpcb conn, and Cables.

※ Caution
※ Caution
1) Be care of FPCB damage and tilt.
Be care of FPCB and PBA damage.
2) Be care of press power/time.

Screw 1 point on Sub PBA. 4 Attach Main Cam on PBA.

3 (* Torque Value : 1.1kgf±7%)

※ Caution ※ Caution
Be care of chip damage nearby screw point. Be care of press power/time.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

5 1. Assemble PBA to Front case, and screw 1

point on PBA (* Torque Value : 1.1kgf±7%)

2. Attach and assemble 2 coaxial cables on the

right side of front
6 Assemble the Bottom REAR in sequence of
3. Attach VT cam and connect connectors and bottom part first and top part last.
cables. (Battery conn, MAIN FPCB conn, 2
coaxial cables)

※ Caution
※ Caution
1) Be care of scratch.
1) Assemble bottom hook of Rear Bottom first, and then side
2) Assemble White cable first and blue cable later.
hooks later.
3) Be care of coaxial cables damage.
2) Be care of scratch and Sub PBA damage.
4) Be care of PBA and Fpcb damage.

Screw insertion 16 Point.

7 ` 8
Assemble the TOP REAR Assy * Torque Value
- 10 points on Rear Top : 1.3kgf±7%
- 6 points on Rear Btm : 1.2kgf±7%

※ Caution
1) Assemble top hooks of Rear Top first, and then right side ※ Caution
hook and left side hooks later.
Be care of Rear damage.
2) Be care of scratch and Main PBA damage.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
7. Level 2 Repair

9 Attach the back cover outside tape on the back

cover by hands.

Gently press all adhesive parts of tape using

disassembly stick or hands. 10 Attach “Tape Cam Deco” on the back cover
by hands and then attach Cam deco assy,
if Cam deco is disassembled.

If Cam deco was not disassembled, this

step is unnecessary.

※ Caution ※ Caution
Fit the tapes precisely to the inner area of back cover. Be care of scratch and tilt.
Don’t touch the attach side of tape for waterproof. Don’t touch the attach side of tape for waterproof.

12 Press Back Glass.

11 Attach the back glass on the back of Front case. - Pressing force : 1 N
- Pressing time : 60 Sec.
SIM Tray must be seperated before
pressing the backglass or the OCTA

※ Caution ※ Caution
Be care of scratch and tilt. Be care of scratch.

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.