60

E3
1.1 Physical Quantity
A quantity which can be measured and expressed in form of laws is called
a physical quantity. Physical quantity (Q) = Magnitude × Unit = n × u
Where, n represents the numerical value and u represents the unit. as
the unit(u) changes, the magnitude (n) will also change but product ‘nu’
will remain same. ID
i.e. n u = constant, or n1u1 = n2u2 = constant;
1.2 Fundamental and Derived Units
U
Any unit of mass, length and time in mechanics is called a fundamental,
absolute or base unit. Other units which can be expressed in terms of
fundamental units, are called derived units
YG

System of units : A complete set of units, both fundamental and derived

for all kinds of physical quantities is called system of units.
(1) CGS system, (2) MKS system, (3) FPS system.
(4) S.I. system : It is known as International system of units. There are
seven fundamental quantities in this system. These quantities and their
D

units are given in the following table.

Quantity Name of Units Symbol
U

Length Metre m
Mass Kilogram kg
ST

Time Second s
Electric Current Ampere A
Temperature Kelvin K
Amount of Substance Mole Mol
Luminous Intensity Candela Cd

Dimensions And Measurement 1

 Besides the above seven fundamental units two supplementary units are
also defined - Radian (rad) for plane angle and Steradian (sr) for solid
angle.

1.3 Dimensions of a Physical Quantity

When a derived quantity is expressed in terms of fundamental quantities,
it is written as a product of different powers of the fundamental quantities.

60
The powers to which fundamental quantities must be raised in order to
express the given physical quantity are called its dimensions.

1.4 Important Dimensions of Complete Physics

E3
Mechanics
S.N. Quantity Unit Dimension
(1) Velocity or speed (v) m/s [M0L1T–1]
(2) Acceleration (a) m/s2 [M0LT–2]
(3) Momentum (P)
(4) Impulse (I)
ID kg.m/s
Newton/sec or
[M1L1T–1]
[M1L1T–1]
U
kg. m/s

(5) Force (F) Newton [M1L1T–2]
YG

(6) Pressure (P) Pascal [M1L–1T–2]

(7) Kinetic energy (Ek) Joule [M1L2T–2]
(8) Power (P) Watt or Joule/s [M1L2T–3]
(9) Density (d) kg/m3 [M1L–3T0]
D

(10) Angular displacement (θ) Radian (rad.) [M0L0T0]

(11) Angular velocity (ω) Radian/sec [M0L0T–1]
U

(12) Angular Acceleration (α) Radian/sec2 [M0L0T–2]

(13) Moment of inertia (I) kg.m2 [ML2T0]
ST

(14) Torque (τ) Newton-meter [ML2T-2]

(15) Angular momentum (L) Joule sec [ML2T–1]
(16) Force constant or spring constant (k) Newton/m [M1L0T–2]
(17) Gravitational constant (G) N–m2/kg2 [M–1L3T–2]

2 Physics Class XI
 (18) Intensity of gravitational field (Eg) N/kg [M0L1T–2]
(19) Gravitational potential (Vg) Joule/kg [M0L2T–2]
(20) Surface tension (T) N/m or Joule/m2 [M1L0T–2]
(21) Velocity gradient (Vg) Second–1 [M0L0T–1]
(22) Coefficient of viscosity (η) kg/m s [M1L–1T–1]

60
(23) Stress N/m2 [M1L–1T–2]
(24) Strain No unit [M0L0T0]
(25) Modulus of elasticity (E) N/m2 [M0L–1T–2]

E3
(26) Poisson Ratio (σ) No unit [M0L0T0]
(27) Time period (T) Second [M0L0T1]
(28) Frequency (n) Hz [M0L0T–1]

Heat
S.N. Quantity
ID Unit Dimension
U
(1) Temperature (T) Kelvin M0L0T0K1]
(2) Heat (Q) Joule [ML2T–2]
YG

(3) Specific Heat (c) Joule/Kg–K [M0L2T–2K–1]

(4) Thermal capacity Joule/K [M1L2T–2K–1]
(5) Latent heat (L) Joule/kg [M0L2T–2]
(6) Gas constant (R) Joule/mol-K [M1L2T–2mol–1K–1]
D

(7) Boltzmann constant (k) Joule/K [M1L2T–2K–1]

(8) Coefficient of thermal Joule/M-s-K [M1L1T–3K–1]
U

conductivity (K)
(9) Stefan’s constant (σ) Watt/m2–K4 [M1L0T–3K–4]
ST

(10) Wien’s constant (b) Meter K [M0L1T0K1]

(11) Planck’s constant (h) Joule s [M1L2T–1]
(12) Coefficient of Linear Kelvin–1 [M0L0T0K–1]
Expansion

Dimensions And Measurement 3

 (13) Mechanical eq. of Heat (J) Joule/Calorie [M0L0T0]
(14) Vander wall’s constant (a) Newton m4 [M1L5T–2]
(15) Vander wall’s consatnt (b) m3 [M0L3T0]

1.5 Quantities Having Same Dimensions

60
S.N. Dimension Quantity
(1) [M0L0T–1] Frequency, angular frequency, angular velocity, velocity
gradient and decay constant
(2) [M1L2T–2] Work, internal energy, potential energy, kinetic energy,

E3
torque, moment of force
(3) [M1L–1T–2] Pressure, stress, Young’s modulus, bulk modulus, modulus
of rigidity, energy density
(4) [M1L1T–1] Momentum, impulse
(5) [M0L1T–2]
(6) [M1L1T–2]
ID
Acceleration due to gravity, gravitational field intensity
Thrust, force, weight, energy gradient
U
(7) [M1L2T–1] Angular momentum and Planck’s constant
(8) [M1L0T–2] Surface tension, Surface energy (energy per unit area)
YG

(9) [M0L0T0] Strain, refractive index, relative density, angle, solid

angle, distance gradient, relative permittivity (dielectric
constant), relative permeability etc.
(10) [M0L2T–2] Latent heat and gravitational potential
(11) [M0L0T–2K–1] Thermal capacity, gas constant, Boltzmann constant and
D

entropy
(12) [M0L0T1]
U

g = acceleration due to gravity, m = mass, k = spring

constant
ST

(13) [M0L0T1] L/R RC where L = inductance, R = resistance,

C = capacitance

(14) [ML2T–2] I2Rt, Vlt, qV, Ll2, CV2 where I = current,

t = time q = charge, L = inductance, C = capacitance,
R = resistance

4 Physics Class XI
 1.6 Application of Dimensional Analysis.
(1) To find the unit of a physical quantity in a given system of units.
(2) To find dimensions of physical constant or coefficients.
(3) To convert a physical quantity from one system to the other.
(4) To check the dimensional correctness of a given physical relation: This is
based on the ‘principle of homogeneity’. According to this principle the

60
dimensions of each term on both sides of an equation must be the same.
(5) To derive new relations.

1.7 Limitations of Dimensional Analysis.

E3
(1) If dimensions are given, physical quantity may not be unique.
(2) Numerical constant having no dimensions cannot be deduced by the methods
of dimensions.
(3) The method of dimensions can not be used to derive relations other than

ID
product of power functions. For example,
s = u t + (1/2) at2 or y = a sin ω t
(4) The method of dimensions cannot be applied to derive formula consist of
U
more than 3 physical quantities.
1.8 Significant Figures
YG

Significant figures in the measured value of a physical quantity tell the

number of digits in which we have confidence. Larger the number of
significant figures obtained in a measurement, greater is the accuracy of
the measurement. The reverse is also true.
The following rules are observed in counting the number of significant
D

figures in a given measured quantity.

(1) All non-zero digits are significant.
U

(2) A zero becomes significant figure if it appears between two non-zero digits.
(3) Leading zeros or the zeros placed to the left of the number are never
significant.
ST

Example : 0.543 has three significant figures.

0.006 has one significant figures.
(4) Trailing zeros or the zeros placed to the right of the number are significant.
Example : 4.330 has four significant figures.
343.000 has six significant figures.

Dimensions And Measurement 5

 (5) In exponential notation, the numerical portion gives the number of significant
figures.

Example : 1.32 × 10–2 has three significant figures.

1.9 Rounding Off

(1) If the digit to be dropped is less than 5, then the preceding digit is left

60
unchanged.

Example : x = 7.82 is rounded off to 7.8, again x = 3.94 rounded off to
3.9.
(2) If the digit to be dropped is more than 5, then the preceding digit is raised

E3
by one.

Example : x = 6.87 is rounded off to 6.9, again x = 12.78 is rounded off
to 12.8.
(3) If the digit to be dropped is 5 followed by digits other than zero, then the

ID
preceding digit is raised by one.
Example : x = 16.351 is rounded off to 16.4, again x = 6.758 is rounded
off to 6.8.
U
(4) If digit to be dropped is 5 or 5 followed by zeros, then preceding digit is
left unchanged, if it is even.

Example : x = 3.250 becomes 3.2 on rounding off, again x = 12.650
YG

becomes 12.6 on rounding off.

(5) If digit to be dropped is 5 or 5 followed by zeros, then the preceding digit
is raised by one, if it is odd.

Example : x = 3.750 is rounded off to 3.8, again x = 16.150 is rounded
off to 16.2.
D

1.10 Significant Figures in Calculation

U

The following two rules should be followed to obtain the proper number
of significant figures in any calculation.
ST

(1) The result of an addition or subtraction in the number having different

precisions should be reported to the same number of decimal places as
are present in the number having the least number of decimal places.
(2) The answer to a multiplication or division is rounded off to the same
number of significant figures as is possessed by the least precise term used
in the calculation.

6 Physics Class XI
 1.11 Order of Magnitude
Order of magnitude of quantity is the power of 10 required to represent the
quantity. For determining this power, the value of the quantity has to be
rounded off. While rounding off, we ignore the last digit which is less than 5. If the
last digit is 5 or more than five, the preceding digit is increased by one.
For example,

60
(1) Speed of light in vacuum = 3 × 108 ms–1 ≈ 108 m/s (ignoring 3 < 5)
(2) Mass of electron = 9.1 × 10–31 kg 10–30 kg (as 9.1 > 5).

1.12 Errors of Measurement.

E3
The measured value of a quantity is always somewhat different from its
actual value, or true value. This difference in the true value of a quantity
is called error of measurement.
(1) Absolute error—Absolute error in the measurement of a physical quantity
is the magnitude of the difference between the true value and the measured
value of the quantity.
ID
Let a physical quantity be measured n times. Let the measured value be
a1, a2, a3, . . . an. The arithmetic mean of these value is
U
Usually, am is taken as the true value of the quantity, if the same is unknown
otherwise.
YG

By definition, absolute errors in the measured values of the quantity are

∆a1 = am – a1

∆a2 = am – a1

...........
D

∆an = am – a2
The
absolute errors may be positive in certain cases and negative in certain
other cases.
U

(2) Mean absolute error—It is the arithmetic mean of the magnitudes of

absolute errors in all the measurements of the quantity. It is represented
ST

by ∆a. Thus

Hence the final result of measurement may be written as a =
This implies that any measurement of the quantity is likely to lie between

Dimensions And Measurement 7

 (am – ) and (am + ).
(3) Relative error or Fractional error—Relative error or Fractional error

= .

(4) Percentage error : Percentage error

60
1.13 Propagation of Errors
(1) Error in sum of tie quantities : Suppose x = a + b
Let ∆a = absolute error in measurement of a

E3
∆b = absolute error in measurement of b

∆x = absolute error in calculation of x i.e. sum of a and b.
The maximum absolute error in x is ∆x = ± (∆a + ∆b)

ID
(2) Error in difference of the quantities—Suppose x = a – b
The maximum absolute error in x is ∆x = ± (∆a + ∆b)

(3) Error in product of quantities—Suppose x = a × b
U
The maximum fractional error in x is

YG

(4) Error in division of quantities—Suppose x =

The maximum fractional error in x is

(5) Error in quantity raised to some power—Suppose x =

D

The maximum fractional error in x is

U

• The quantity which have maximum power must be measured carefully
because it’s contribution to error is maximum.
ST

UNIT I – UNITS & MEASUREMENT

1. A new unit of length is chosen such that the speed of light in vacuum is
unity. What is the distance between the sun and the earth in terms of the
new unit if light takes 8 min and 20 s to cover this distance.

8 Physics Class XI
 2. If x = a + bt + ct2, where x is in metre and t in seconds, what is the unit
of c ?
3. What is the difference between mN, Nm and nm ?
4. The radius of atom is of the order of 1Aº & radius of Nucleus is of the
order of fermi. How many magnitudes higher is the volume of the atom
as compared to the volume of nucleus ?

60
5. How many kg make 1 unified atomic mass unit ?
6. Name same physical quantities that have same dimension.
7. Name the physical quantities that have dimensional formula [ML–1T–2].
8. Give two examples of dimension less variables.

E3
9. State the number of significant figures in
(i) 0.007 m2 (ii) 2.64 × 1024 kg
(iii) 0.2370 g cm–3 (iv) 0.2300m
(v) 86400
ID (vi) 86400 m
10. Given relative error in the measurement of length is .02, what is the
percentage error ?
U
11. A physical quantity P is related to four observables a, b, c and d as
follows :
a3b2
P =
YG

d c
The percentage errors of measurement in a, b, c and d are 1%, 3%, 4%
and 2% respectively. What is the percentage error in the quantity P?
12. A boy recalls the relation for relativistic mass (m) in terms of rest mass
(m0) velocity of particle V, but forgets to put the constant c (velocity
D

of light). He writes m = correct the equation by putting the

missing ‘c’.
U

13. Name the technique used in locating.

(a) an under water obstacle
ST

(b) position of an aeroplane in space.

14. Deduce dimensional formulae of—
(i) Boltzmann’s constant
(ii) mechanical equivalent of heat.

Dimensions And Measurement 9

 15. Give examples of dimensional constants and dimensionless constants.
SHORT ANSWER QUESTIONS (2 MARKS)
16. The vernier scale of a travelling microscope has 50 divisions which
coincide with 49 main scale divisions. If each main scale division is 0.5
mm. Calculate the minimum inaccuracy in the measurement of distance.
17. If the unit of force is 100N, unit of length is 10m and unit of time is 100s.

60
What is the unit of Mass in this system of units ?
18. Describe the principle and use of SONAR and RADAR.
19. State the principle of homogeneity. Test the dimensional homogeneity of
equations—

E3
(i) s = ut + at2

(ii) S =u+
n

20. In Vander Wall’s gas equation

dimensions of a and b.
ID V2
(V–b) = RT. Determine the
21. Using dimensions convert (a) 1 newton into dynes (b) 1 erg into joules.
U
22. Magnitude of force experienced by an object moving with speed v is given
by F = kv2. Find dimensions of k.
YG

23. A book with printing error contains four different formulae for displacement.
Choose the correct formula/formulae

(a) y = a sin (b) y = a sin vt

(c) y =
D

(d) y =
U

24. Give limitations of dimensional analysis.

ST

25. For determination of ‘g’ using simple pendulum, measurements of length

and time period are required. Error in the measurement of which quantity
will have larger effect on the value of ‘g’ thus obtained. What is done to
minimise this error?
SHORT ANSWER QUESTIONS (3 MARKS)
26. Give the name of six Indian Scientists and their discoveries.

10 Physics Class XI
 27. Name the discoveries made by the following scientists :
(a) Faraday (b) Chadwick
(c) Hubble (d) Maxwell
(e) Newton (f) Bohr.
28. Name the scientific principle on which the following technology is

60
based.
(i) Steam engine (ii)  Laser
(iii) Aeroplane (iv) Rocket propulsion
(v) Radio and T.V.

E3
(vi) Production of Ultra high magnetic field.
29. Describe a method for measuring the molecular size of Oleic acid.
[3 MARKS]

nearby star from the earth. ID

30. Describe the Parallox Method for the determination of the distance of a

31. Deduce the dimensional formula for the following quantities

U
(i) Gravitational constant (ii) Young’s modulus
(iii) Coefficient of viscosity.
YG

32. Define the following units :

(i) Light year (ii) Parsec
(iii) Astronomical unit (AU)
LONG ANSWER QUESTIONS (5 MARKS)
D

33. Name the four basic forces in nature. Write a brief note of each. Hence
compare their strengths and ranges.
34. Distinguish between the terms precision and accuracy of a measurement.
U

35. Explain
(i) absolute error (ii) mean absolute error
ST

(iii) relative error (iv) percentage error

(v) random error
NUMERICALS
36. Determine the number of light years in one metre.

Dimensions And Measurement 11

 37. The sides of a rectangle are (10..5 ± 0.2) cm and (5.2 ± 0.1) cm. Calculate
its perimeter with error limits.
38. The mass of a box measured by a grocer’s balance is 2.3 kg. Two gold
pieces 20.15 g and 20.17 g are added to the box.
(i) What is the total mass of the box ?
(ii) The difference in masses of the pieces to correct significant figures.

60
39. 5.74 g of a substance occupies 1.2 cm3. Express its density to correct
significant figures.
40. If displacement of a body s = (200 ± 5) m and time taken by it t = (20 +
0.2) s, then find the percentage error in the calculation of velocity.

E3
41. If the error in measurement of mass of a body be 3% and in the measurement
of velocity be 2%. What will be maximum possible error in calculation of
kinetic energy.
42. The length of a rod as measured in an experiment was found to be 2.48m,

ID
2.46m, 2.49m, 2.50m and 2.48m. Find the average length, absolute error
and percentage error. Express the result with error limit.
43. A physical quantity is measured as Q = (2.1 ± 0.5) units. Calculate the
percentage error in (1) Q2 (2) 2Q.
U
44. When the planet Jupiter is at a distance of 824.7 million km from the earth,
its angular diameter is measured to be 35.72′′ of arc. Calculate diameter
YG

of Jupiter.
45. A laser light beamed at the moon takes 2.56s and to return after reflection
at the moon’s surface. What will be the radius of lunar orbit.
46. Convert
(i) 3 ms–2 to km h–2
D

(ii) G = 6.67 × 10–11 N m2 kg–2 to cm3 g–1 s–2
47. A calorie is a unit of heat or energy and it equals 4.2 J where 1J = 1 kg
U

m2s–2. Suppose we employ a system of units in which unit of mass is α kg,

unit of length is β m, unit of time γs. What will be magnitude of calorie
in terms of this new system.
ST

48. The escape velocity v of a body depends on–

(i) the acceleration due to gravity ‘g’ of the planet,
(ii) the radius R of the planet. Establish dimensionally the relation for
the escape velocity.
49. The frequency of vibration of a string depends of on, (i) tension in the

12 Physics Class XI
 string (ii) mass per unit length of string, (iii) vibrating length of the string.
Establish dimensionally the relation for frequency.
50. One mole of an ideal gas at STP occupies 22.4 L. What is the ratio of
molar volume to atomic volume of a mole of hydrogen? Why is the ratio
so large. Take radius of hydrogen molecule to be 1ºA.
51. Derive an expression for the centripetal force F acting on a particle of
mass m moving with velocity v in a circle of radius r.

60
52. The error in the measurement of radius of a sphere is 2%. What would be
the error in :
(a) Volume of sphere

E3
(b) Surface area of sphere.
SOLUTIONS
1. Speed of light in vacuum, c = 1 new unit of length s–1

t = 8 min. 20 sec, = 500 s

x = 500 new unit of length
ID
x = ct = 1 new unit of length s–1 × 500s

2. The unit of left hand side is metre so the units of ct2 should also be metre.
U
Since t2 has unit of s2, so the unit of c is m/s2.
3. mN means milli newton, 1 mN = 10–3 N, Nm means Newton meter, nm
YG

means nano meter.

4.

5. 1u = 1.66 × 10–27 kg
6. Work, energy and torque.
D

7. Stress, pressure, modulus of elasticity.

8. Strain, refractive index.
U

9. (i)1, (ii) 3, (iii) 4, (iv) 4, (v) 3, (vi) 5 since it comes from a measurement
the last two zeros become significant.
ST

10. 2%.
11. Relative error in P is given by

So, percentage error

Dimensions And Measurement 13

  ∆a   ∆b  1  ∆c  ∆d
  == 3  ×100  + 2  ×100  +  ×100  + ×100
 a   b  2 c  d

= (3 × 1%) + (2 × 3%) + + (1 × 2%)

= 13%
Rounded off value of P = 3.8.

60
12. Since quantities of similar nature can only be added or subtracted, v2 cannot
be subtracted from 1 but v2/c2 can be subtracted from 1.

m=

E3
13. (a) SONAR → Sound Navigation and Ranging.
(b) RADAR → Radio Detection and Ranging.
14. (i) Boltzmann Constant :

(ii)
k=

[J] =
ID = [M0L0T0]
= [M1L2T–2K–1]
U
15. Dimensional Constants : Gravitational constant, plank’s constant.
YG

Dimensionless Constants : π, e.
16. Minimum inaccuracy = Vernier constant
= 1 MSD – 1 VS.D

= 1 MSD – MSD
D

= (0.5 mm) = 0.01 mm

17. [F] = [MLT–2]
U

[M] = = 105kg.
ST

19. (i) Dimension of L.H.S. = [s] = [M0L1T0]

Dimension of R.H.S. = [ut] + [at2]
= [LT–1.T] + [M0L1T–2.T2] = [M0L1T0]
as Dimensions of L.H.S. = Dimensions of R.H.S.
The equation to dimensionally homogeneous.

14 Physics Class XI
 (ii) Sn = Distance travelled in nth sec that is (Sn – Sn–1)

Sn = u × 1 +
[LT–1] = [LT–1] + [LT–2][T]
[LT–1] = [LT–1]
L.H.S. = R.H.S.

60
Hence this is dimensionally correct.
20. Since dimensionally similar quantities can only be added

[P] =

E3
[b] = [V] = [L3].

22. [K] =

the probable correct formula. Since

(a) y = a sin
ID
23. The argument of sine and cosine function must be dimensionless so (a) is

= [T0] is dimensionless.
U
(b) y = a sin vt, [vt] = [L] is dimensional so this equation is incorrect.
YG

(c) y = is dimensional so this is incorrect.

(d) y = : Though dimensionless does not

have dimensions of displacement so this is also incorrect.

D

(NUMERICAL)
36. 1 Iy = 9.46 × 1015 m
U

1m=
= 1.057 × 10–16 Iy
37. P = 2 (l + b) ± 2 (∆l + ∆b)
ST

= 2(10.5 + 5.2) ± 2(0.2 + 0.1)

= (31.4 ± 0.6) cm.
38. (i) Mass of box = 2.3 kg
Mass of gold pieces = 20.15 + 20.17 = 40.32 g = 0.04032 kg.
Total mass = 2.3 + 0.04032 = 2.34032 kg

Dimensions And Measurement 15

 In correct significant figure mass = 2.3 kg (as least decimal)
(ii) Difference in mass of gold pieces = 0.02 g
In correct significant figure (2 significant fig. minimum decimal) will
be 0.02 g.

39. Density = = 4.783g/cm3

60
Here least significant figure is 2, so density = 4.8 g/cm3.

40. Percentage error in measurement of displacement =

E3
Percentage error in measurement of time =
Maximum permissible error = 2.5 + 1 = 3.5%

41. K.E. =

ID
U
Percentage error in K.E. = 3% + 2 × 2% = 7%
42. Average length
YG

= = 2.48m
Mean absolute error

= = 0.013m
D

Percentage error = × 100% = 0.04 × 100%

U

= 0.40%
Correct length = (2.48 ± 0.01)m
ST

Correct length = (2.48m ± 0.40%)

43. P = Q2

16 Physics Class XI
 × 100% = 47.6% = 48%
R = 2Q

= 0.238

60
× 100% = 24%

44. θ = 35.72′′
1′′ = 4.85 × 10–6 radian ⇒ 35.72′′ = 35.72 × 4.85 ×10–6 rad.

E3
d = DQ = 824.7 × 35.72 × 4.85 × 10–6
= 1.4287 × 105 km
45. t = 2.56 s

ID
t = time taken by laser beam to go to the moon =
distance between earth and moon
U
= d = c ×
YG

= 3 × 108 ×
= 3.84 × 108 m.

46. (i) 3m s–2 =

D

= = 3.8880 × 104 km h–2 = 3.9 × 104 km h–2

U

(ii) G = 6.67 × 10–11 N m2 kg–2
= 6.67 × 10–11 (kg m s–2) (m2 kg–2)
ST

= 6.67 × 10–11 kg–1 m3 s–2

= 6.67 × 10–11 (1000 g)–1 (100 cm)3 (s–2)

= 6.67 × 10–11 × × 100 × 100 × 100 g–1 cm3 s–2

= 6.67 × 10–8 g–1 cm3 s–2.

Dimensions And Measurement 17

 47. n2 = n1

= 4.2

n2 = 4.2 α–1 β–2 γ2

60
48. v α ga Rb ⇒ v = k ga Rb, K → dimensionless proportionality constant
[v] = [g]a [R]b
[M0L1T–1] = [M0L1T–2]a [M0 L1 T0]b

E3
equating powers
1 = a + b

– 1 = – 2a ⇒ a =

b=1–a=1–
v=k
n ∝ Ia Tb mc, [I] = M0L1T0
49.
ID
U
[T] = M1 L1 T–2 (force)
[M] = M1 L–1 T0
YG

[M0 L0 T–1] = [M0 L1 T0]a [M1 L1 T–2]b [M1 L–1 T0]c

b + c = 0
a + b – c = 0
D

–2b = – 1 ⇒ b =

c = – a=1
U

n ∝ .
ST

50. 1 A0 = 10–10 m
Atomic volume of 1 mole of hydrogen

= Avagadros number × volume of hydrogen molecule

= 6.023 × 1023 × × π × (10–10 m)3

= 25.2 × 10–7 m3

18 Physics Class XI
 Molar volume = 22.4 L = 22.4 × 10–3 m3

= 0.89 × 104 ≈ 104

This ratio is large because actual size of gas molecule is negligible in

comparison to the inter molecular separation.

60
51. F ∝ ma
∝ vb


rc
F = k mavbrc

E3
[MLT–2] = [M]a [LT–1]b [L]c
[M] [L] [T–2] = [M]a [L]b+c [T]–b
Comparing powers of m, L and T
a = 1


b+c = 1
b = –1
mv 2
ID
–2 = –b
b=2
U
F=k
r

YG

4
52. (a) v = π R 3
3
∆V ∆R ∆V
=3 ⇒ % =×
3 2% =6%
V R V
D

(b) A = 4π R 2
U

∆A ∆R ∆A
=2 ⇒ % =×
2 2% =4%
A R A
ST

Dimensions And Measurement 19

 (M.C.Q.) PHYSICAL WORLD & MEASUREMENT
1. Which of the following is not the unit of distance?
(a) Light year (b) Astronomical Unit
(c) Parsec (d) Millisecond
2. The dimensional formula for ω in the relation y = A Sin ωt is
[M° L° T–1]

60
(a) [M° L° T] (b)
(c) [ML° T°] (d) [M° L–1 T–1]
3. Dimensional formula for curie is
(a) [M° L T–1] (b) [M° L–1 T°]

E3
(c) [M° L° T–1] (d) [M–1 L° T°]
4. Which of the following pairs of physical quantities does not have same
dimensional formula.
(a) Work and torque



(b)
(c)
(d)
ID
Angular momentum and Planck's constant
Tension and surface tension
Impulse and linear momentum
U
5. If momentum (p), Area (A) and time (T) are takes as fundamental quantities,
then energy has the dimensional formula :
YG

(a) [ p A½ T–1 ] (b) [ p A–½ T1 ]

(c) [ p2 A T ] (d) [ p A–1 T ]
6. Out of 4.0 and 4.00, which is more accurate?
(a) 4.0 (b) 4.00
D

(c) Both are equally accurate (d) Nothing can be said

7. The speed (v) of sound in a gas is given by v = k Px ρ y
Where K is dimensionless constant, P is pressure, and ρ is the density,
U

then
(a) x = ½, y = ½ (b) x = –½, y = –½
ST

(c) x = ½, y = –½ (d) x = –½, y = ½

8. If percentage errors in the measurement of mass and volume of an object
are 2% and 3% respectively, then the percentage error in the measurement
of the density of the object is :
(a) 1% (b) 0.66%
(c) 5% (d) 6%

20 Physics Class XI
 9. Given that
dx x-a
∫ 2ax-x 2
= a n sin -1
a

Where a is a constant. Using dimensional analysis the value of n is
(a) 1 (b) –1

60
(c) 0 (d) None of the above
a
10. In the standard equation Snth = u + (2n-1) what dimensions do you
2
view for Snth

E3
(a) [ M° L1 T°] (b) [ M° L–1 T]
(c) [ M° L T–1 ] (d) [ M° L° T1 ]
α
11. Given force = what are dimensions of α, β ?
density + β3
(a) ML–2 T–2 , ML–1/3 (b) M2 L4 T–2, M1/3 L–1
(c) M2 L–2 T–2, M1/3 L–1
12. The dimensions of intensity are
(a) [ L° M T–3 ]
ID (d) M2 L–2 T–2, M L–3

(b) [ L1 M2 T–2 ]
U
(c) [ L2 M T–2 ] (d) [ L2 M2 T–3 ]
13. The dimensions of light year is
YG

(a) T (b) L T–1

(c) L (d) T–1
14. The time dependence of a physical quantity P is given by P = Po exp.(–αt2),
where α is a constant and t is time, The constant α is
D

(a) dimensionless (b) has dimensions T–2

(c) has dimensions of P (d) has dimensions T2
U

15. Two quantities A and B have different dimensions. Which mathematical

operation may be physically meaningful.
(a) A/B (b) A+B
ST

(c) A–B (d) A=B

16. Which one of the following pair of quantities has the same dimension?
(a) force and work done (b) momentum and impulse
(c) pressure and force (d) surface tension an force

Dimensions And Measurement 21

 17. A cube has a side of length 1.2×10–2 m. Calculate its volume.
(a) 1.7 ×10–6 m3 (b) 1.73 ×10–6 m3
(c) 1.0 ×10–6 m3 (d) 1.732 ×10–6 m3
 a 
18. The equation of state for a real gas is given by  P + 2  (v – b) = RT
v 
the dimensions of constant a are

60
(a) [ M L5 T–2 ] (b) [ M–1 L5 T2 ]
(c) [ M L–5 T–1 ] (d) [ M L5 T–1 ]
19. The number of significant figures in 30.00 m are

E3
(a) 1 (b) 2
(c) 3 (d) 4
20. Which of the following measurements is most precise?


(a)
(c)
5.00 m
5.00 cm
ID (b)
(d)
5.00 km
5.00 mm
U
Answer Key :
1. (d) 2. (b) 3. (c) 4. (c) 5. (a) 6. (b)
YG

7. (c) 8. (c) 9. (c) 10. (c) 11. (c) 12. (a)

13. (c) 14. (b) 15. (a) 16. (b) 17. (a) 18. (a)
19. (d) 20. (d)
D

HINTS AND EXPLANATIONS :

2. ωt = Angle = dimensionless
U

1
so dimension of ω = = [ M° L° T–1 ]
t
3. curie = unit of radioactivity
ST

dN Number
= =
dt time
= [ T–1] or [M° L° T–1 ]

22 Physics Class XI
 4. Surface tension and Tension have different dimension
Tension = Force = [MLT–2]
Force
Surface tension = = [M T –2 ]
length
5. Energy = Force × Length

60
change in momentum
= × area [p A½ A –1 ]
time

7. v = k Px ρ y

E3
[M° L T–1] = [M L–1 T–2]x [M L–3]y
0 = x + y , 1 = –x –3y , –1 = –2x
y = –x x=½

8.
=–½
∆ρ
ρ
× 100 =
∆m
m
× 100 +
∆ν
ν
ID
× 100 = 2% + 3% = 5%
U
L n
9.  L  = a

No dimension 1 = an Possible for n = 0

YG

11. Dimension of β 3 = dimension of density

Solve, β = [ M 1/3 L−1 ]
α
Force =
density
D

=α Force × density
= [M L T −2 M L−3 ]
U

= [M 2 L−2 T −2 ]
ST

energy
12. Intensity =
area × time

 M L2 T −2  −3
=  2
=  [M T= ] [M L°T −3 ]
 L T 

Dimensions And Measurement 23

 13. Light year = distance = L
1
14. α t2 = constant α
= = [T −2 ]
2
t

16. Momentum and Impulse have some dimension = [M L T–1]

60
−2 3 −6 −6 3
17. Volume = (side)3 =(1.2 ×10 ) =1.728 ×10 =1.7 ×10 m
2
of a = PV [M
18. dimension = = L−1 T −2 L6 ] [M L5 T −2 ]

E3
20. 5.00 mm is most precise becasuse it have least least count.

*****

ID
U
YG
D
U
ST

24 Physics Class XI