Shenzhen Legevo Technology Co., Ltd.
LEGEVO_TLT-2H_ 101
User_Guide
BRAND: VSUN
MODEL: TLT-2H
USE: GPS Tracker para radiolocalización vehicular
MAIN FUNCTION : Radiomodem para transmision de datos (GSM/GPRS) con GPS (rastreo
vehicular)
MANUFACTURER'S NAME: SHENZHEN LEGEVO TECHNOLOGY CO., LIMITED
MANUFACTURER'S ADDRESS: unit 811-815, building 523 , Bagua Ling Industrial
Zone, Futian Dist,Shen Zhen, China ZIP code :518029
COUNTRY: CHINA
frequency band: 850MHz/900MHz/1800MHz/1900MHz
Network: GSM, GPRS
Operating temperature: -20°C to +70°C
GPS sensitivity : -159dBm (GPS)
Feature: With built-in GPS
NOTE :The equipment incorporates a GSM module SIMCom brand, model SIM800C , with
FCC ID Code UDV-SIM800C
Shenzhen Legevo Technology Co.,Ltd.
Table of Contents
Preface...............................................................................................................2
Attention........................................................................................................... 2
◆Main functions........................................................................................... 3
◆Set up..........................................................................................................3
◆Hardware Installation................................................................................ 8
1.Installation diagram of The Tracker........................................................ 8
2.GPS Vehicle Tracker Installation............................................................10
3. Install relay............................................................................................11
4. Install SOS Button................................................................................. 11
5. LED Indications......................................................................................11
◆Application............................................................................................... 12
◆Specs.........................................................................................................12
◆Command Set...........................................................................................13
Product and accessories.......................................................................12/13
FAQ.......................................................................14/15/16/17
1
Shenzhen Legevo Technology Co.,Ltd.
Preface
Thank you for purchasing our products. This deliberately edited manual is to
introduce the tracker with the complete technical data and the instructions showing
how to operate the device smoothly and correctly. Make sure to read this manual
carefully before using this product. Most problems could be solved through the
explanations and the troubleshooting tips. Once you finish reading it, keep it handy for
necessary reference. Please note that specification and information are subject to
changes without prior notice in this manual. Any change will be integrated in the latest
release. The manufacturer assumes no responsibility for any errors or omissions in this
document.
Attention
1. Make sure to read this manual carefully before using this product.
2. Please insert the SIM card before installing, and make sure the SIM card has no
password, otherwise the tracker will not work normally.
3. Please make sure that all the cables of the tracker has been connected rightly, and
then connect the tracker to host power. Must not install or take down the tracker
when it is power on. If you found any troubles or omissions about the connections of
cables, please cut off power first, otherwise you will easily damage the tracker.
4. The tracker works in wireless communications, so please cut off the host power
before your vehicles entering fuel depot and dangerous material place.
5. The tracker’s work voltage is 9V-75V. Please use the tracker in the scope of work
voltage.
6. The host of GPS tracker is a low-power wireless transmitter and receiver. It receives
and sends radio frequency signal when it is working.
7. To avoid electromagnetic interference or uncompatible configuration, please stop
using your tracker in the noticed place.
2
Shenzhen Legevo Technology Co.,Ltd.
◆Main functions
1. Positioning and Tracking: Through the on-line Positioning Platform or the cell phone to
locates at times, and get the working status. You can choose the Positioning Platform by
yourself.
2. Triggering Emergency Alarm: When there is an emergency happened on the vehicle,
you can press the SOS button and the installed device will send alarm SMS to the
authorized numbers.
3. Remote controlling oil and circuit: you can control the car oil and circuit via the unit by
SMS in anywhere and anytime.
4. Vibrate Alert: Send SMS to the unit to start vibrate alert function. When the vehicle is
vibrated, the unit will send vibrate alert SMS to all authorized numbers.
5. Overspeed Alert: Send SMS to the unit to start over speed alert function. When the
vehicle is overspeed, the unit will send the overspeed alert to all authorized numbers.
6. Geo-fence: Set up a geo-fence for the unit to restrict its movements within a district.
The unit will send the message to all authorized numbers when it breaches the district.
7. Auto Track: You can set up auto track by SMS or on-line positioning platform.
8. Mileage statistics; ACC checking; cutting off power and alarm; Air-conditioning check.
9. Support analog voltage input, can use for oil measure.
◆Set up
1．Initialization
Send “begin + password” in SMS to the unit, it will reply “begin ok” and initialize all the
settings. (Default password: 123456)
2. Add authorized number
Send SMS “admin123456 13612345678”. "admin" as instruction, "123456" as password,
"13612345678" as authorized number. It will reply “admin ok!”.
3. Delete authorized number
Send SMS “noadmin123456 13612345678”. "noadmin" as instruction, "123456" as
password, "13612345678" as deleted number. It will reply “noadmin ok!”.
3
Shenzhen Legevo Technology Co.,Ltd.
4. Change the Password
Send SMS: “password + old password + space + new password” to change the password.
For example: Send SMS “Password123456 138138”. "password" as instruction,
"123456"as old password, "138138" as new password. Password must be six digits.
Tracker’s initial password is 123456.
5. Control Circuit
Send SMS “stopelec+password” to control circuit. For example send SMS:
“stopelec123456”.
"stopoil" as instructions, "123456" as the password.
To supply the circuit again, send SMS “supplyelec+password” to the unit. For example,
send SMS “Supplyelec123456” to the tracker. "Supplyelec" as instruction, "123456" as
password.
6. Vibrate alert
Set up: The user can send SMS “Vibrate + 1 or 0” to the unit, then the unit will reply
“Change Vibrate Alert OK!” .In case of such a car vibrated, it will send SMS “Vibrate
alert” along with a Geo-info to the number.
For example, send SMS “vibrate 1” to the unit.
Cancel: Send SMS “vibrate 0” to deactivate the vibrate alert.
7. Overspeed alert
Set up: Send SMS “speed+password+space+080” to the unit (support the speed is
80km/h).
For example, send SMS “speed123456 080”. "speed" as instruction, "80" as limit speed,
“123456”as password.
Cancel: Send SMS “nospeed+password” to deactivate the overspeed alert.
8. Geo-fence
Set up a geo-fence for the unit to restrict its movements within a district. The unit will
send the message to the authorized numbers when it breaches the district.
Set up: The user can Send SMS “stockade + password + space + MinLatitude,
MinLongitude; MaxLatitude, MaxLongitude” to unit to set the restricted district. In case
of breach, it will send SMS “stockade! + geo-info” to the authorized numbers.
4
Shenzhen Legevo Technology Co.,Ltd.
For example send SMS “stockade123456 22.548123, 114.081234; 22.549123,
114.082234” to the unit.
Remark: The first latitude & longitude is coordinate of min of the Geo-fence, while the
second latitude & longitude is the coordinate of the max. It will alarm one time in each
setting.
Cancel: Send SMS “nostockade + password” to deactivate this function.
This function will be out of effect after the unit moves outside the district.
9 . Restart the tracker.
Send SMS “reboot+password” to the tracker. For example“reboot123456”.The tracker
will be restarted. It will reply “system will reboot...”.
10. Enquiry Positioning
Send SMS “position” to the unit, then the unit will send SMS with real-time longitude
and latitude to the cell phone.
11. Auto track
Send SMS “at30sum5” to the unit, it will reply “Auto track set ok.” and report a Geo-info
at 30 seconds intervals for 5 times: The max intervals is 65535 seconds. You can send
“at30sum0” for heaps of times.
Send“noat123456” to the tracker, it will reply “Cancel auto track ok.”. And the tracker will
stop send messages.
12. Modes switch between “telephone” and “web”
Set up: Send SMS “web + password” to device. For example, the password is 123456.
Send SMS “web123456” to the device, the device will reply SMS “set web ok”. After this,
the tracker will report the GPS data to IP address.
If you want to send GPS data to telephone, you can send SMS “telephone + password” to
device, the device will reply “set telephone ok”. And then, the device will send GPS data
to your telephone by SMS. (The default is sending the GPS data to the telephone)
13. Modify IP address and port
The IP address and port of the tracker can be modified and transferred data to other
platform. Send SMS “ IP + ip address + PORT + port value” to the unit. If the platform’s IP
address and port is 123.67.87.9 and 344, send SMS “ip 123.67.87.9port344” to the
5
Shenzhen Legevo Technology Co.,Ltd.
tracker. It will reply “set IP address and PORT ok.”. After this, device will send GPS data to
this IP and Port.
14. Set Device ID number
This command uses only for GPRS communication. Default device ID is the same. In order
to identify device for platform, must set device ID for every device. Send SMS “number +
tracker ID number” to the tracker. For example “number13612345678”.
15. Set APN
In order to send GPS data to IP address, you still must set mobile network Access Point
Name (APN). If you don’t know the APN, you can consult local network service supplier.
The format of set APN is “APN + password +space + apn value”. For example you send
SMS “apn123456 cmnet” to the device. The device will reply SMS “Set APN ok.” .
16. Set GPRS user name and password
Some country must be set GPRS user name and password for GPRS communication. The
format of set GPRS user name and password is “user + space + GPRS user name + space
+ GPRS password”. For example, “user name 123456”, “user” is command, “name” is
GPRS user name, “123456” is GPRS password. After send SMS, tracker will reply “Set
GPRS User and Password ok . ” .
17. Set country time zone
In the default, tracker reply position SMS time is UTC time. After you can set zone time,
tracker will reply the time of your country. The format is “zone + password + space +
time zone value”. For example, “zone123456 8” is set east 8 time zone. Time zone value
ranges from -12 to 12. One time zone stands for one hour. “zone123456 -8” is set west 8
time zone. After send SMS, tracker will reply “Set Time Zone OK.”.
18. Set ACC open and close send data interval
You can set the interval of send data when ACC open and close. The format of set ACC
open interval is “accon + time interval”. For example “accon 30” stand for when ACC
open send data for every 30 seconds. The format of set ACC close interval is “accoff +
time interval”. For example “accoff 60” stand for when ACC close send data for every
60 seconds.
6
Shenzhen Legevo Technology Co.,Ltd.
19. Set ACC open and close send SMS notify
You can set the SMS notify of when ACC on and off. The format of set is “accnotify + 1
or 0”. For example “accnotify 1” stand for when ACC on and off send SMS to authorized
numbers. “accnotify 0” stand for close send SMS notify. In order to use this function, you
must set authorized numbers.
20. Get GPS Info with Google Format
You can get latitude and longitude with Google website format. So you can open map
directly by mobile. The format of SMS is “google”. After you send SMS, tracker will
reply GPS info with google website format.
21. Set call reply SMS format
You can set reply SMS format after you call tracker. The format of SMS is “geosms +
value”. The SMS of “geosms 1” set reply SMS format as “position”. The SMS of “geosms
2” set reply SMS format as “google”.
7
Shenzhen Legevo Technology Co.,Ltd.
◆Hardware Installation
1 Installation diagram of The Tracker
The standard I/O cable is an 7-pin cable, including the power, analog input, and
negative/positive input and output interfaces.
7 6 5 4
Output 2 Digital input 2 Output 1 GND (-)
3 2 1
AD input Digital input 1 Power (+)
7 Pin details:
Pin Number Color Description
Positive electrode of the power input, connected to the positive
1 Power (+) Red electrode of the vehicle battery. Input voltage: 9–75 V. 12 V or 24V is
recommended.
2 Digital input 1 Green Connect to the vehicle ACC cable by default to detect the vehicle ACC status.
valid voltage of 0–5 V.
3 AD input Brown
Connect to an external sensor, such as the fuel level sensor
8
Shenzhen Legevo Technology Co.,Ltd.
Ground wire,
4 GND (-) Black connected to the negative electrode of the vehicle battery or to the
negative terminal.
Valid: low level (0 V)
Invalid: open drain
Maximum voltage for output open drain (invalid): 45 V
5 Output 1 Yellow
Maximum current for output low voltage (valid): 500 mA
Connect to an external relay to remotely cut off the vehicle fuel cable or
engine power supply.
6 Digital input 2 Blue Digital input 1, negative trigger (SOS button by default)
Valid: low level (0 V)
Invalid: open drain
Maximum voltage for output open drain (invalid): 45 V
7 Output 2 White
Maximum current for output low voltage (valid): 500 mA
Connect to an external relay to remotely cut off the vehicle fuel cable or
engine power supply.
①Installing the SIM Card
Insert the SIM card into the card slot (card chip facing down).
9
Shenzhen Legevo Technology Co.,Ltd.
Note:
◎Power off the device before installing the SIM card.
◎Ensure that the SIM card has sufficient balance.
◎Ensure that the phone card PIN lock has been closed properly.
◎Ensure that the SIM card in the device has subscribed the caller ID service if you want
to use your authorized phone number to call the device.
② Power button
Switch Button to left side , device on
Switch Button to right side , device off
③ USB port
Configure parameters
2.GPS Vehicle Tracker Installation
GPS tracker should be installed by technical professional of local service centre.
Without permission, the user cann’t repair and move the tracker randomly. If users do,
any unfortunated damage should be compensated by himself.
Installation steps (caution: the following installation should under no power, otherwise
will be dangerous)
1.Power supply line: The red wire connects 12V“+”;Black wire connects to 12V“-”
2. Wire for cutting off circuit of the tracker
White wire connects the relay pin 85; 86 pin connect to power positive, 87a pin and 30
pin in series power supply circuits. Caution: Wrong connection of yellow wire will
damage the tracker.
10
Shenzhen Legevo Technology Co.,Ltd.
3. Install relay
4. Install SOS Button
5. LED Indications
①Put the SIM card in place and installed the tracker in the car
②Make sure the power button ON
Put the SIM card in place and installed the tracker in the car, the green indicator is on.
The red indicator will on when the batter is charging.
11
Shenzhen Legevo Technology Co.,Ltd.
GSM LED (Green)
On Device booting.
Flashing every 0.1 second Sending messages or data.
Flashing every 1 second Searching GSM signals.
Flashing every 2 second Has connected to the GSM network.
GPS LED (Blue)
Off Searching GPS signals.
On Has been located.
Flashing every 2 second GPS module is standby.
◆Application
1. Vehicle Rental/Special Tracking System
2. Finance and Insurance Business Tracking System
3. Car Commanding and Dispatching System
4. Heavy Construction Vehicles Tracking Device
5. Shipping Cargoes Tracking
◆Specs.
Content Specs
Dim. 87.6* 50.8 * 19.6(mm)
Weight 350g
Green indicator showing the GSM signal
LED indicator
Blue indicator showing the GPS signal
Button/Switch 1 power button
Memory 1M Flash memory (store 10000 way points)
Network SMS, GPRS (CMNET)
GSM Band 850MHz/900MHz/1800MHz/1900MHz
GPS chip Queclink LK26 chip
12
Shenzhen Legevo Technology Co.,Ltd.
GSM/GPRS Module Simcom SIM800C
GPS sensitivity -159dBm
GPS accuracy 3-30 m
Location Query Mobile phone or platform
Work Voltage DC 9V－75V
Battery Chargeable changeable 3.7V / 250mAh Li-ion battery
Standby work current < 50mA
Storage Temp. -40°C to +85°C
Operation Temp. -20°C to +70°C
Humidity 5%--95% non-condensing
◆Command Set
No. Function SMS Reply
1 Initialization Begin123456 Begin ok
2 Add Number Admin123456 13612345678 Admin ok
3 Delete Number Noadmin123456 Noadmin ok
13612345678
4 Change Password123456 138138 Change password ok
password
Stopelec123456 Stop electricity ok
13
Shenzhen Legevo Technology Co.,Ltd.
5 Control circuit Supplyelec123456 Supply electricity ok
Vibrate 1 Change Vibrate Alert
6 Vibrate alert OK
Vibrate 0 Change Vibrate Alert
OK
Speed123456 080 Speed ok
7 Overspeed alert
Nospeed123456 Cancel speed ok
Stockade123456 coordinate;
8 Geo fence alert coordinate Set stockade ok
Nostockade123456 Cancel stockade ok
9 Restart tracker Reboot123456 System will reboot
10 Enquiry position position GPS info
At30sum5 Auto track set ok
11 Auto track
Noat123456 Cancel auto track ok
Set auto track Telephone123456 Set telephone ok
12 mode
Web123456 Set web ok
13 Change IP and Ip112.33.44.211port2332 set IP address and
PORT PORT ok
14 Set device id Number13612345678 set number ok
15 Set APN Apn123456 cmnet Set apn ok
Set GPRS user User name pass Set GPRS user name
16 name and and password ok
password
17 Set time zone Zone123456 8 Set time zone ok
Set ACC open Accon 30 Set ACC ON Interval
18 and close OK.
interval Accoff 60 Set ACC OFF Interval
OK.
Set ACC open Accnotify 1 Set ACC Notify OK.
19 and close SMS
notify Accnotify 0 Set ACC Notify OK.
Get Google GPS info with Google
20 format GPS info Google website format
21 Set reply SMS Geosms 1 Set Geo SMS Format
format OK
14
Shenzhen Legevo Technology Co.,Ltd.
22 Read APN info info M:(mileage)A:C(apn
name)U:AC:(Upload
data in preset
time)G:0001
23 Read All TCP
Parameters
24 TCP / UDP protocol123456 UDP Switch to UDP mode.
Switch
25 UDP/ TCP Switch protocol123456 tcp switch back to TCP
mode, this is the
default mode.
26 Clear meter clearmeter
27 Check password getpassword
28 Delete requestdeleteadmin
authorized
number
◆Product and accessories:
No. Picture Name Remark
1 Main unit with Standard
battery
2 I/O cable
3 Adhensive tape
4 Manual
5 SOS Optional accessories
6 Relay
15
Shenzhen Legevo Technology Co.,Ltd.
◆FAQ:
Part I: how to Activate the GPS Device?
1 By Legevo (recommend , convenient)
2 By yourself (by Mobile Phone SMS Commands ,email us for the SMS commands file )
3 By yourself ( by Legevo Tool Configuring Device Parameters ,complicated)
◆Contact information:
Shenzhen Legevo Technology Co.,Ltd.
Tel:+8613265573535
Email:[email protected]
Add: unit 811-815, building 523 , Bagua Ling Industrial Zone, Futian Dist,Shen Zhen,
China ZIP code :518029
16
