6-DZM-20 12V 20Ah(2hr) VRLA GEL BATTERY

Chilwee DZM Series VRLA Gel Battery is specially designed for motive power
applications, i.e. electric bikes/scooters, electric tricycles, electric motocycles and other
device require DC power source. The DZM Series adopts international leading
technologies to ensure the batteries with features of long cycle life, large current discharge
capability, high reliability and safety, and environmental-friendly.

FEATURES & BENEFITS

Non-Cadmium Design, Environment-friendly: Chilwee Battery has adopted internationally leading technology - Non-Cadmium container formation Production
Process technology, which is in the leading position in the industry. It helps to save energy 28.5%, save water 90%, and non-discharge of waste water.

Super Long Mileage: Special active additives have been added in the positive plate to improve the consistency of the formated active material after formation.
This has been obviously improved the battery's charge/discharge efficiency, and more power can be released during discharging. The mileage of each discharge
is improved significantly.

Strong Motive Power: Super thin plate design is adopted to increase the area of electrochemical reaction, which enables the battery has excellent large current
discharge ability. Adopting cast-welding process to reduce the battery's internal resistance, so the battery's charge/discharge efficiency is improved to enable
battery with large power discharge capability.

Long Service Life: The Chilwee battery has excellent cycle life which can reach 600 cycles @ 80% DOD. The batteries are well grouped to improve the battery
bank's consistency in order to improve the battery bank's service life.

Non-Spillable and High Safety: The battery container and lid are made of Enhanced ABS material and they are sealed by epoxy resin, so the battery is well
sealed without any acid leakage issue. High accuracy safety valve has been applied to prevent battery bulging, and safety valve and acid filter are used for
preventing sparks splashed into battery to ensure the safety use of battery.

High Reliability: Improved negative material prescription and increased micropoles structure at negative helps to improve a lot on charge/discharge
performance at extreme temperature condition. Low water loss rate, high temperature resistance, and battery deformation resistance.

SPECIFICATION
Nominal Voltage (V) 12V
Open Circuit Voltage (V/Block) 13.1V - 13.45V
Number of Cells (Per Block) 6 Cells
2h rate (to 1.75V/Cell) 20Ah
3h rate (to 1.75V/Cell) 22Ah
Rated Capacity
℃
(Ah, 25 )
5h rate (to 1.80V/Cell)
10h rate (to 1.80V/Cell)
24Ah
26Ah
20h rate (to 1.85V/Cell) 28Ah
Nominal Weight (Kgs) Approx. 7.0 Kgs
Dimension (L X W X H, Total Height. mm) (181mm±2) X (77mm±2) X (170mm±2), (170mm±2)
Container Material Enhanced ABS
Float (V/Block) 13.50V - 13.80V
Charge Voltage
Cycle (V/Block) 14.60V - 14.80V
Maximum Discharge Current (A) 150A (5s)
Maximum Charge Current (A) 2.7A

℃ Operation (maximum): -20℃ to 50℃

20℃ to 30℃
Working Temperature( )
Operation (recommended):
Storage Temperature(℃) -20℃ to 50℃

Copyright Chaowei Power Co., Ltd., all rights reserved. Version 2015
6-DZM-20 12V 20Ah(2hr) VRLA GEL BATTERY
Discharge Curves at Different Discharge Rate (25 ) ℃ Charge Curve for 6-DZM-20 (4 Blocks/String)
Voltage (V)

Phase 1: The Max. charge current is 2.7A, and the charge voltage is gradually
risen up to 57.6V;
Phase 2: The charge voltage is gradually risen up to 58.8V+ 0.2V.When the
charge current has dropped to 0.55A-0.6A,shifting to float charge.
Discharge Time (minutes) Phase 3: The constant float charge voltage is 55.0V+ 0.2V.

Capacity (%) Effect of Temperature on Capacity Capacity (%) Capacity Retention Characteristics
110% 110%

100%
100%
90%
90%
80%

80% 70%

℃
60%
70%

60%
50%
40 ℃ 30 ℃ 25
40%

-20 -10 0 10 20 30 40 50 30%

℃
3 6 9 12 15
Temperature Storage Time (Months)

Cycle Life (Cycles) Cycle Life vs. Depth of Discharge Capacity (%) Number of Cycles vs. Capacity
1600 120%

1200 100%

800 80%

400
60%

0
40% 50% 60% 70% 80% 90% 100%
0 100 200 300
Depth of Discharge (DOD, %)
Number of Cycles (Cycles)

RECOMMENDED SETTING PARAMETERS

Item 48V Battery Bank 60V Battery Bank 72V Battery Bank
Max. Charge Voltage (V) 58.6V-59V 73.3V-73.7V 88.0V-88.4V
Float Charge Voltage (V) 54.8V-55.2V 68.6V-69.0V 82.3V-82.7V

Charger Parameters Max. Charge Current (A) 2.3A-2.7A 2.3A-2.7A 2.3A-2.7A

Shifting Current (A) 0.55A-0.6A 0.55A-0.6A 0.55A-0.6A
Temperature Compensation
℃ ）
Coefficient (mV/ /Cell
～ ℃
2.5 4.0 mV/ /Cell ～ ℃
2.5 4.0mV/ /Cell ～
2.5 4.0mV/ /Cell℃
Low-voltage Protection (V) 42V±0.5V 52.5V±0.5V 63V±0.5V
Controller Parameters Limited Current (A) ≤25A ≤25A ≤25A
Turn-on Lock Current (A) ≤0.15A ≤0.15A ≤0.15A
Average Current (A) ≤10A ≤10A ≤10A
Electric Motor Setting
Electric Motor Power (W) ≤450W ≤600W ≤650W
* All the data and technical curves are for customer's reference only. This information is subject to change without any prior notice.

For More Information, please contact:

CHAOWEI POWER CO., LTD.
No. 12 Zhizhou Ave., Zhicheng New Industrial Park, Changxing County, Zhejiang Province, China. 313100
Tel: +86 572 6200283 Fax: +86 572 6054410
Web: www.cnchaowei.com Email: [email protected]

Copyright Chaowei Power Co., Ltd., all rights reserved. Version 2015