Scribd Logo
Upload

Welcome to Scribd!

  • 46 views

    Technical Data Sheet ITEM: Marking Tape/ Hot Foil Marking Tape/ Sequential Marking Tape Structural Configuration

    Uploaded by

    Kuzhali
    Hot foil marking tapes are used for printing and embossing on pipes, cables, and other materials. They consist of an untreated polyester film carrying layer with a release coating, pigment or paint layer, and a heat seal layer. The material transfers the pigment to the surface when hot embossed. Different heat seal layers can be used depending on the surface. The tapes are available in various widths and lengths on plastic or paper cores for marking pipes, tubing, wire, and cable in various colors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Technical Data Sheet ITEM: Marking Tape/ Hot Foil Marking Tape/ Sequential Marking Tape Structural Configuration

    Uploaded by

    Kuzhali
    46 views1 page
    Hot foil marking tapes are used for printing and embossing on pipes, cables, and other materials. They consist of an untreated polyester film carrying layer with a release coating, pigment or paint layer, and a heat seal layer. The material transfers the pigment to the surface when hot embossed. Different heat seal layers can be used depending on the surface. The tapes are available in various widths and lengths on plastic or paper cores for marking pipes, tubing, wire, and cable in various colors.

    Original Description:

    Marking-tape-en

    Original Title

    Marking-tape-en

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Hot foil marking tapes are used for printing and embossing on pipes, cables, and other materials. They consist of an untreated polyester film carrying layer with a release coating, pigment or paint layer, and a heat seal layer. The material transfers the pigment to the surface when hot embossed. Different heat seal layers can be used depending on the surface. The tapes are available in various widths and lengths on plastic or paper cores for marking pipes, tubing, wire, and cable in various colors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    46 views1 page

    Technical Data Sheet ITEM: Marking Tape/ Hot Foil Marking Tape/ Sequential Marking Tape Structural Configuration

    Uploaded by

    Kuzhali
    Hot foil marking tapes are used for printing and embossing on pipes, cables, and other materials. They consist of an untreated polyester film carrying layer with a release coating, pigment or paint layer, and a heat seal layer. The material transfers the pigment to the surface when hot embossed. Different heat seal layers can be used depending on the surface. The tapes are available in various widths and lengths on plastic or paper cores for marking pipes, tubing, wire, and cable in various colors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    TECHNICAL DATA SHEET

    ITEM: marking tape/ hot foil marking tape/ sequential marking tape

    Structural configuration:

    Carrying layer Untreated 12 mic/15 mic BOPET film


    Primary layer Release coating
    Secondary layer Pigment/paint
    Tertiary layer Heat seal layer

    Application:

    Hot foil marking tapes are mainly used as embossing/printing material on cables/pipes. Material may vary from PVC,
    PP, HDPE, LDPE etc.

    Description:

    Hot foil marking tapes are used as ptinting embossing material for in depth marking of pipes and cables. The material
    is used by hot embossing the film on the uncoated side whereby the pigment is transferred on the cable/pipe. Colours
    can be arranged as per the requirement. The heat seal layer coating can be changed as per the requirement of the
    transferee surface.

    TECHNICAL DATA

    Item Pancake rolls Bobbins (traverse 150 mm)


    Standard tape width 6 mm, 9 mm, 10 mm, 25 mm 6 mm 9 mm, 10 mm
    Standard tape length 1 000 m 10 000 m 10 000 m
    Core inside diameter 25,4 mm 76 mm
    Core material Plastic Paper tube
    Barrel Outside diameter 95 mm
    Barrel material Fiber
    Arbor hole inside 10 mm
    diameter
    Traverse 150 mm
    Flange outside diameter 140 mm
    Flange material Plastic
    Marking application Pipe, tubing wire, cable Colors
    Ink Non-toxic, heavy metal free, matte
    finish, wax/resin base
    Carrier Polyester (mylar)
    Thickness 48 gauge (0.50 mil)
    Tensile 18 000 psi minimum Packaging
    Melt point 4460F (2300C)

    You might also like