Scribd
Upload
343 views3 pages

CAT320D Elec System Operationc Sys (Related Components)

Uploaded by

Aye Min
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
343 views3 pages

CAT320D Elec System Operationc Sys (Related Components)

Uploaded by

Aye Min
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

320D & 320D L Excavators CXY00001-UP (MACHINE) POWERED BY 3066 Engine(SEB...

Page 1 of 3

Shutdown SIS

Previous Screen

Product: EXCAVATOR
Model: 320D EXCAVATOR CXY
Configuration: 320D & 320D L Excavators CXY00001-UP (MACHINE)
POWERED BY 3066 Engine

Systems Operation
320D, 323D, 324D, 325D, 328D and 330D Excavators Machine Electronic Control System
Media Number -RENR9848-01 Publication Date -01/03/2006 Date Updated -08/03/2006

i02412816

Related Components
SMCS - 5050-EK

Data Links
Cat Data Link

The Cat Data Link is an input and an output of the Machine ECM. The Cat Data Link connects to the
Machine ECM at connector contact J1-33 and J1-43. The data link is designed to carry communications
between the controller and the monitor. The data link is not a visible component. The data link consists of
internal control circuits and a harness wiring. The data link is bidirectional. The controller can receive
information and the controller can send information through the data link. The controller sends information
about the fuel level, engine coolant temperature and many other signals to the monitor panel.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/med... 4/12/2007
320D & 320D L Excavators CXY00001-UP (MACHINE) POWERED BY 3066 Engine(SEB... Page 2 of 3

Illustration 1 g01217984
Schematic of the Cat Data Link

CAN Data Link

The CAN data link is used for communication between the following modules: Machine ECM, Switch
Panel and Monitor. Two 120 Ohm terminating resistors must be installed in the wiring harness in order for
the CAN data link to function properly.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/med... 4/12/2007
320D & 320D L Excavators CXY00001-UP (MACHINE) POWERED BY 3066 Engine(SEB... Page 3 of 3

Illustration 2 g01222613
Schematic of the CAN Data Link Circuit

Action Alarm
The action alarm SOUNDS in order to alert the operator when a high emergency condition is present. For
example, the engine oil pressure decreases below a set value.

Travel Alarm
The travel alarm SOUNDS in order to alert the area that the machine is moving.

Copyright 1993 - 2007 Caterpillar Inc. Thu Apr 12 16:33:40 UTC+0630 2007
All Rights Reserved.
Private Network For SIS Licensees.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/med... 4/12/2007

You might also like