Series Features

NL
・The shut-off valve built into the socket opens when the plug is inserted
and closes when the plug is removed. Therefore, it is not necessary to
operate the main vaIve when inserting or removing the plug.
・Both the socket and plug are available with male screw connection,
female screw connection, or hose connection. Such connections can
be combined as desired.
・The fitting sections of models NL-21 to NL-24 are identical in size and
interchangeable. Those of models NL-44 to NL-48 are also
For low pressure, wide applications interchangeable with one another.
Single valve type ・The main body is made of steel, brass or stainIess steel. When made
of steel, the main body is hardened to ensure high durability and a
Valve Valve packing high resistance to abrasion.
Socket body Sleeve ・A variety of models are available. You can select the best model to
Valve spring Sleeve spring
Adapter Steel ball
suit your specific operating conditions and applications. For example,
Stop ring Plug various pipe and hose connections are available for oil pressure and
pneumatic machinery.

When disconnecting
When the sleeve of the socket is moved to the socket
side, the steel ball can move freely in the outer
circumferentioal direction. The plug is pushed out by the
reaction force of the valve spring. As a result, the valve
closes automatically to stop fluid from flowing.
Specification
Model NL-21 NL-22 NL-23 NL-24 NL-44 NL-46 NL-48
Nominal diameter 1/8" 1/4" 3/8" 1/2" 1/2" 3/4" 1"
Material of socket/plug body Steel SC(Chrome plated) / Brass C3604(BsBM) / Stainless steel SUS304
Socket
Connection method Female thread(F) / Male thread(M) / Hose nipple(H) / Urethane hose (B)
Plug

Working pressure Steel 1.5

（2.0） When connecting
MPa Brass 1.0
（1.5）
(Max.working pressure) When the plug is inserted while the sleeve remains on
Stainless steel 1.5
（2.0）
the socket side, the valve opens and fluid flows. The
Valve packing material: Standard Nitrile rubber(NBR) : −20°C∼ ＋80°C
Sleeve returns to its former position by the force of the
Working temperature range Optional Viton(FMP) : −20°C∼ ＋180°C
spring and the steel ball locks in place to ensure
Steel Air / Oil
connection. The valve packing completely prevents fluid
Applicable fluid Brass Air / Water
leakage.
Stainless steel Air / Water
Use Pneumatic tool, pneumatic piping, pneumatic machinery, water piping, etc.

Notes
・Fluid must flow from the socket to the pIug because of the
NL Series Socket (S) NL Series Plug (P) single valve design.
・When connecting this coupling to vibration tools or
machinery, install a 30cm long rubber hose between the tool
Dmax.

Dmax.
T

and the coupling.

d

T
d

Model SM Model PM L
(Male thread) L
(Male thread)

Model
Thread
size
T L
Dimensions(mm)

Dmax. d
Mass(g)

Steel Brass Stainless

Model
Thread
size
T L
Dimensions(mm)
Dmax. d
Mass(g)

Steel Brass Stainless

NL Nut coupling
(R) (φ) steel (R) (Hex) (φ) steel
Valve packing
NL-22SM 1/4" 55.5 φ26 7 95 104 95 NL-21PM 1/8" 38 14 5 23 25 24
Valve Sleeve
NL-23SM 3/8" 55.5 φ26 8 100 109 100 NL-22PM 1/4" 40 14 7.5 25 27 26
Valve spring Sleeve spring
NL-24SM 1/2" 59.5 φ26 9 110 117 111 NL-23PM 3/8" 40 17 7.5 40 45 41
Socket body
NL-44SM 1/2" 64 Hex. 32/37 13 220 240 218 NL-24PM 1/2" 46 21 7.5 65 70 66 Steel ball
NL-46SM 3/4" 65 Hex. 32/37 16 240 255 237 NL-44PM 1/2" 47.5 21 12.5 70 76 70 Adapter
Stop ring
NL-48SM 1" 67 Hex. 35/40.4 16 250 270 245 NL-46PM 3/4" 51 27 12.5 115 123 117 Nut
NL-48PM 1" 54 35 12.5 125 133 128
Dmax.

Dmax.
T

T
d

Model SF L
Model PF･PFF L Plug Nut
(Female thread) (Female thread)
Thread Dimensions(mm) Mass(g) Thread Dimensions(mm) Mass(g)
Model size Model
d size Dmax. d
T L Dmax. Steel Brass Stainless T L (φ) Steel Brass Stainless
(Rc) (φ) steel (Hex) steel
NL-22SF 1/4" 50.5 φ26 9 104 110 107 NL-22PFF 1/4"G 32 17 7.5 23 ― ― Model SB･PB
NL-23SF 3/8" 52.5 φ26 9 103 111 108 NL-22PF 1/4"Rc 36 17 7.5 30 32 30 (Urethane hose)
NL-24SF 1/2" 55.5 Hex. 29/33.5 9 122 131 123 NL-23PF 3/8"Rc 38 21 7.5 45 48 46 Model Hose size Model Hose size
NL-44SF 1/2" 59 Hex. 32/37 20 225 232 225 NL-24PF 1/2"Rc 41 29 7.5 65 70 65 Inner dia. Outer dia. Inner dia. Outer dia.
Socket(S) Plug(P)
NL-46SF 3/4" 62 Hex. 35/40.4 20 235 250 230 NL-44PF 1/2"Rc 41.5 29 12.5 70 77 71 (mm) (mm) (mm) (mm)
NL-48SF 1" 65 Hex. 41/47.3 20 260 286 263 NL-46PF 3/4"Rc 45 35 12.5 106 117 108 NL-22SB φ 6.5 φ 10 NL-22PB φ 6.5 φ 10
NL-48PF 1"Rc 54 41 12.5 120 128 118 NL-23SB φ8.5 φ 12.5 NL-23SB φ8.5 φ 12.5

NL Line connector
Dmax.

Dmax.
T

T
d

Model SH Model PH
(Hose nipple) L (Hose nipple) L Outlet

Hose Dimensions(mm) Mass(g) Hose Dimensions(mm) Mass(g)

Model size d Model size Dmax. d
T L Dmax. Steel Brass Stainless L Steel Brass Stainless
(φ) steel T (φ) (φ) steel
NL-22SH 1/4" 72.5 φ26 5 95 104 98 NL-22PH 1/4" 57 16 5 27 29 26
NL-23SH 3/8" 76.5 φ26 7.5 100 108 99 NL-23PH 3/8" 61 16 7.5 35 38 31 Inlet
NL-24SH 1/2" 78.5 φ26 9 110 117 112 NL-24PH 1/2" 63 18 7.5 50 55 48 Specification
NL-44SH 1/2" 83 Hex. 32/37 9 220 240 218 NL-44PH 1/2" 67.5 22 9 75 80 75 Connector couplings Dimensions(mm)
Model Mass(g)
NL-46SH 3/4" 92 Hex. 32/37 13 240 262 235 NL-46PH 3/4" 76.5 30 13 122 132 126 Inlet Outlet Connector body Overall length
NL-48SH 1" 102 Hex. 32/37 19 270 296 268 NL-48PH 1" 86.5 30 18.5 145 165 148 NL-P-2 NL-22PM NL-22SM×2 22×22×69 69 260

※Specifications are subjects to change without notice. YOSHIDA MFG. CO., LTD.
2009.2
 Series Features

YNL
・As well as NL series, the shut-off valve built into the socket
opens when the plug is inserted and closes when the plug is
removed. Therefore, it is not necessary to operate the main
valve when inserting or removing the plug.
・Just push the pIlug into the socket for simple and secure
connection. This reduces connection time and improves
efficiency.
Simple and secure push-to-connect type ・Use YNL series socket and NL series plug together.
For low pressure, wide applications ・Available only with steel body. Not suitable for water.
single valve type ・A variety of models are available. You can select the best
model to suit your specific operating conditions and
applications. For example, various pipe and hose connections
Valve spring are available for pneumatic machinery.
Socket body O ring
Valve collar Sleeve
Sleeve spring
O ring
O ring Steel ball When disconnecting
Stopper When the sleeve of the socket is moved to the socket side, the steel
O ring ball can move freely in the outer circumferentional direction. The plug
Stop ring is pushed out by the reaction force of the valve spring. As a result, the
Valve
Adapter Plug
valve closes automatically to stop fluid from flowing.

When connecting
Without moving the sleeve, When the plug is inserted, the valve is
opens and fluid flows.
The sleeve returns to its former position by the force of the spring
and the steel ball locks in place to ensure connection. The O ring
completely prevents fluid leakage.
Specification
Model YNL-22 YNL-23 YNL-24
Nominal diameter 1/4" 3/8" 1/2" Notes
Steel SC(Chromate plated)
・Fluid must flow from the socket to the plug because of the single valve
Material of socket / plug body
design.
Connection method Socket Female screw(F)･Male screw(M)･Hose Nipple(H)･Urethane hose(B)
・When connecting this coupling to vibration tooIs of machinery, install a
Working pressure MPa 30cm long rubber hose between the tool and the coupling.
(Max.working pressure) Steel 1.5(2.0)

O ring material: Standard Nitrile rubber(NBR) : −20°C∼＋80°C

Working temperature range Option Viton(FMP) : −20°C∼＋180°C
Applicable fluid Steel Air
Use Pneumatic tool, Pneumatic piping, Pneumatic machinery

YNL Series Socket (S)

Dmax.

Dmax.
H
H

T
d

Model SM L
Model SF L
(Male thread) (Female thread)
Thread size Dimensions(mm) Thread size Dimensions(mm)
Model T Mass(g) Model T Mass(g)
（R） L Dmax.（φ） d（φ） H（Hex） （Rc） L Dmax.（φ） H（Hex）

YNL-22SM 1/4” 55 25 7 19 95 YNL-22SF 1/4” 51 25 19 95

YNL-23SM 3/8” 56 25 8 19 100 YNL-23SF 3/8” 53 25 21 105

YNL-24SM 1/2” 59 25 9 21 120 YNL-24SF 1/2” 55 25 29 132

Dmax.
Dmax.

H1
H
H

d
d

Model SH L
Model SB L
(Hose nipple) (Urethane Hose)
Dimensions(mm) Hose size Dimensions(mm)
Model Hose size Mass(g) Model Mass(g)
Inner Dia. Outer Dia.
T L Dmax.（φ） d（φ） H（Hex） (mm) (mm) L Dmax.（φ） d（φ） H（Hex） H1
（Hex）

YNL-22SH 1/4” 72 25 5 19 95 YNL-22SB φ6.5 φ10 59 25 5.5 19 17 110

YNL-23SH 3/8” 76 25 7.5 19 95 YNL-23SB φ8.5 φ12.5 61 25 7.5 19 19 115

YNL-24SH 1/2” 78 25 9 19 110

※Specifications are subjects to change without notice. YOSHIDA MFG. CO., LTD.
2009.2
 Series Features

TS
・This vaIveIess model has no valve mechanism in the socket and
none in the plug. It is ideal if there is no need to shut the pipe when
For middle & low pres- disconnecting the socket and plug.
・The internal construction features a low flow resistance toreduce
sure, wide applications pressure Ioss. This series is thus well-suited to high-viscosity fluids,
Valveless type steam and pulverulent bodies.
・Both the socket and plug are available with male screw connoction,
Sleeve Sleeve spring female screw connection and hose connection. Such connections
O ring Steel ball can be combined as desired.
Socket body Stop ring
Plug
・Numerous models are available varying in nominal diameter, body
material, O ring material and connection method. You can select
precisely the best model for your appIication and operating
conditions.

When disconnecting
When the sleeve of the socket is moved to the socket
side, the steel ball can move freely in the outer
circumferential direction and the plug can be removed.
Since both the socket and plug have no valve
mechanism, the fluid flows outward.

Specification
Model TS-1 TS-2 TS-3 TS-4 TS-6 TS-8 TS-10 TS-12 TS-16
Nominal diameter 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
Material of socket / plug body Brass C3604(BsBM) / Stainless steel SUS304
Socket
Connection method Female thread(F) / Male thread(M) / Hose nipple(H)
Plug When connecting
Working pressure Brass 5.0 (7.5) 3.0 (4.5) 2.0 (3.0) 1.5 (2.3) If the plug is inserted while the sleeve remains on the
MPa
(Max.working pressure) Stainless steel 7.5 (10.0) 4.5 (6.5) 3.0 (4.0) 2.0 (3.0) socket side, the sleeve is returned to its former position
Standard Viton(FMP) : −20°C∼＋180°C by the force of the sleeve spring. The steel ball locks in
O ring material:
Working temperature place to ensure connection. The O ring completely
Nitrile rubber(NBR) : −20°C∼＋80°C
range Optional prevents fluid leakage.
Neoprene(CR) : −20°C∼＋80°C
Brass Gasoline, Heavy oil, Kerosene, Water, Steam
Applicable fluid Notes
Stainless steel Acidic fluide, Alkaline fluid, Brine
・Note that sockets can be connected to plugs only when their
Hydraulic machine, Hydraulic piping, Water piping, Steam piping, nominaI diameters are the same.
Use
Sea-water piping, Chemical plant, Chemicals, High pressure gas piping ・Sockets and plugs with large nominal diameters have a
lowresistance to pressure. Bear this in mind when using large
sockets and plugs.
・Please specify the O ring material in accordance with the
TS Series Socket (S) type of fluid to be piped.
Dmax.

Dmax.

Dmax.
H

H
T

T
d

Model SM Model SF Model SH

(Male thread) L (Female thread) L (Hose nipple) L

Thread Dimensions(mm) Mass(g) Thread Dimensions(mm) Mass(g) Hose Dimensions(mm) Mass(g)

model size model size 型 式
T Dmax. d H Stainless T Dmax. d H Stainless size Dmax. d Stainless
L Brass L Brass T L Brass
(R) (φ) (φ) (Hex) steel (Rc) （φ） （φ） （Hex） steel （φ） （φ） steel
TS-1SM 1/8" 30 18 5 14 28 27 TS-1SF 1/8" 25 18 5 14 25 24 TS-1SH 1/8" 42 18 3 28 26
TS-2SM 1/4" 42 24 7 19 70 65 TS-2SF 1/4" 32 24 7 19 55 50 TS-2SH 1/4" 57 24 5 67 63
TS-3SM 3/8" 45 28 10 23 100 93 TS-3SF 3/8" 35 28 12 23 90 83 TS-3SH 3/8" 62 28 7 105 97
TS-4SM 1/2" 54 35 13 29 180 166 TS-4SF 1/2" 42 35 13 29 160 148 TS-4SH 1/2" 71 35 10 175 162
TS-6SM 3/4" 64 45 17 35 360 335 TS-6SF 3/4" 50 45 19 35 320 300 TS-6SH 3/4" 84 45 15 337 315
TS-8SM 1" 74 58 24 46 680 628 TS-8SF 1" 59 58 26 46 525 490 TS-8SH 1" 99 58 19 640 600
Face width Face width
TS-10SM 1-1/4" 86 69 32 54 1030 960 TS-10SF 1-1/4" 64 69 36 54 900 825 TS-10SH 1-1/4" 119 69 26 1000 950
Face width Face width
TS-12SM 1-1/2" 95 75 38 58 1250 1180 TS-12SF 1-1/2" 71 75 42 58 1050 970 TS-12SH 1-1/2" 125 75 32 1245 1180
Face width Face width
TS-16SM 2" 108 98 50 77 2130 2020 TS-16SF 2" 80 98 54 77 2850 1660 TS-16SH 2" 141 98 40 2400 2190

TS Series Plug (P)

Dmax.

Dmax.

Dmax.
d

Model PM Model PF Model PH L

(Male thread) L (Female thread) L (Hose nipple)
Thread Dimensions(mm) Mass(g) Thread Dimensions(mm) Mass(g) Hose Dimensions(mm) Mass(g)
model size model size model
T Dmax. d Stainless T Dmax. d Stainless size Dmax. d Stainless
L Brass L Brass T L Brass
(R) （Hex） （φ） steel (Rc) （Hex） （φ） steel （φ） （φ） steel
TS-1PM 1/8" 32 11 5 25 24 TS-1PF 1/8" 25 14 5 13 13 TS-1PH 1/8" 42 12 3 12 12
TS-2PM 1/4" 38 17 7 32 30 TS-2PF 1/4" 32 17 7 17 16 TS-2PH 1/4" 53 14 5 25 33
TS-3PM 3/8" 43 19 10 45 42 TS-3PF 3/8" 38 21 10 45 42 TS-3PH 3/8" 60 18 7 40 37
TS-4PM 1/2" 52 23 13 84 78 TS-4PF 1/2" 44 26 13 85 78 TS-4PH 1/2" 69 22 10 75 69
TS-6PM 3/4" 59 29 17 150 138 TS-6PF 3/4" 50 35 17 177 161 TS-6PH 3/4" 80 28 15 132 124
TS-8PM 1" 74 38 24 320 300 TS-8PF 1" 59 41 26 265 240 TS-8PH 1" 96 40 19 340 315
TS-10PM 1-1/4" 83 48 32 530 505 TS-10PF 1-1/4" 64 53 32 610 580 TS-10PH 1-1/4" 120 48 26 560 520
TS-12PM 1-1/2" 93 54 38 710 675 TS-12PF 1-1/2" 75 58 38 750 635 TS-12PH 1-1/2" 132 55 32 700 650
TS-16PM 2" 102 Face width 75/φ80 48 1430 1320 TS-16PF 2" 83 Face width 77/φ82 50 1350 1180 TS-16PH 2" 142 70 40 1450 1350

※Specifications are subjects to change without notice. YOSHIDA MFG. CO., LTD.
2009.2
 Series Features

KS
・Both the socket and plug of this twin-valve
coupling incorporate a shutoff valve. The moment
the socket and plug are disconnected, the socket
and plug sides of the coupling are completely
sealed.
・Because the coupling has been made with great
precision by fully utilizng the newest machining
For middle & low pressure, technoIogy, a superior sealing performance is
Twin valve type ensured even as the socket and plug are
connected or disconnected.
・The passage opens the moment the socket or plug
O ring is connected and closes the moment the socket or
Valve packing Sleeve spring plug is disconnected. This virtually eliminates fluid
Valve Sleeve loss and air entry.
Valve spring Steel ball
・Numerous models are available varying in nominal
Valve holder Stop ring
diameter, body material, O ring material and valve
Snap ring Plug
Socket body packing material. Select the model that is best
suited to your application and operating conditions.

When disconnecting
When the sleeve of the socket is moved to the socket
side, the steel ball can move freely in the outer
circumferential direction. The plug is disconnected from
the socket by the reaction forces of the socket and plug
vaIve springs. The moment the plug is disconnected,
the valves on both the socket and plug sides contact
the mating seat sections to stop the fluid from flowing.

Specification
Model KS-1 KS-2 KS-3 KS-4 KS-6 KS-8 KS-10 KS-12 KS-16 When connecting
Nominal diameter 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" If the plug is inserted while the sleeve remains on the
Material of socket / plug body Brass C3604(BsBM) / Stainless steel SUS304
socket side, the sleeve is returned to its former position
by the force of the sleeve spring and the steel ball locks
Connection method (type) Only female thread(both socket and plug)
in place to ensure connection. At this time, the valve on
Working pressure Brass 5.0 (7.5) 3.0 (4.5) 2.0 (3.0) 1.5 (2.3)
MPa the socket side and that on the plug side push against
(Max.working pressure) Stainless steel 7.5 (10.0) 4.5 (6.5) 3.0 (4.5) 2.0 (3.0) each other to open the passage and allow fluid to
O ring, Valve packing Standard Viton(FMP) : −20°C∼＋180°C flow.The O ring completely prevents fluid leakage.
material : Working Nitrile rubber(NBR) : −20°C∼＋80°C
temperature range Optional
Neoprene(CR) : −20°C∼＋80°C
Notes
Brass Gasoline, Heavy oil, Kerosene, Water, Air ・The chemical resistance varies depending on the O ring and
Applicable fluid
Stainless steel Acidic fluide, Alkaline fluid, Brine valve packing material. Select the material that is best for the
Water piping, Sea-water piping, Oxygen piping, Acetylene piping, fluid to be piped.
Use ・Note that sockets can be connected to plugs only when their
Air piping, Chemicals, Chemical plant, High pressure gas piping
nominal diameters are the same.
・If the connection side is equipped with a hose nipple or a
female screw, use a commercially available joint.

Lt Lp
Hp
T2
Hs

T1
D

C
Model KS Ls
(Female thread)
Thread Socket(S) Thread Plug(P)
size size Assemblig Min, sectional
Model Dimensions(mm) Mass(g) Model 寸 法（mm） Mass(g) length area of
T1 T2
（Rc） Ls Hs（φ/Face width） D（φ） C Brass Stainless steel （Rc） Lp Hp（Hex） Brass Stainless steel Lt.(mm) passage(cm２)

KS-1S 1/8" 48 18 / 14 24 16.5 90 73 KS-1P 1/8" 29 14 20 18 60 0.15

KS-2S 1/4" 58 22 / 17 28 17.5 150 130 KS-2P 1/4" 36 17 38 33 71 0.2
KS-3S 3/8" 65 25 / 21 35 20 220 195 KS-3P 3/8" 40 21 65 55 80 0.5
KS-4S 1/2" 72 35 / 29 45 25 470 435 KS-4P 1/2" 44 29 135 125 89 1
KS-6S 3/4" 88 41 / 35 55 32 775 710 KS-6P 3/4" 52 35 230 210 105 1.9
KS-8S 1" 102 48 / 41 65 32.5 1090 1000 KS-8P 1" 62 41 380 315 125 2.9
KS-10S 1-1/4" 115 59 / 54 77.5 34 1730 1600 KS-10P 1-1/4" 70 54 650 600 141 4.5
KS-12S 1-1/2" 124 69 / 63 87.5 39 2550 2340 KS-12P 1-1/2" 75 65 965 890 151 7.7
KS-16S 2" 132 86 / 77 109 39 3950 3660 KS-16P 2" 80 77(F/W) 1630 1510 160 12.3

※Specifications are subjects to change without notice. YOSHIDA MFG. CO., LTD.
2009.2
 Series Features

HP
・Both the socket and plug of this twin valve
coupling incorporate a shutoff valve. The moment
the socket and plug are disconnected, the valves
on the socket and plug sides contact the mating
seat sections to completely seal the socket and
plug sides.
・The body is made of S45C steel and hardened to
For high pressure, ensure high durability and a high resistance to
Twin valve type abrasion.
・This series has been designed for use under high
pressure and is highly resistant to vibration and
impact. It is ideal for pressurized gas pipes and
machinery that uses high oil pressure.
O ring
・Due to low pressure loss, this series is ideally
Back-up spring
Valve packing Sleeve spring
suited for highly pressurized oil and gas pipes.
Valve Sleeve
Valve spring Steel ball
Valve holder Stop ring When disconnecting
Snap ring When the sleeve of the socket is moved to the socket
Socket body Plug side, the steel ball can move freeIy in the outer
circumferential direction. The plug is disconnected from
the socket by the reaction forces of the socket and plug
valve springs. The moment the plug is disconnected,
the valves on the socket and plug sides contact the
mating seat sections to stop the fluid from flowing.

When connecting
When the plugs is inserted while the sleeve remains on
the socket side, the sleeve is returned to its former
position by the force of the sleeve spring. The steel ball
locks in place to ensure connection. At this time, the
valve on the socket side and that on the plug side push
against each other to open the passage and to allow
Specification fluid to flow. The O ring and back-up ring completely
Model HP-2 HP-3 HP-4 HP-6 HP-8 prevent fluid Ieakage.
Nominal diameter 1/4" 3/8" 1/2" 3/4" 1"

Material of socket / plug body Steel / S45C(Zinc plated)

Notes
Connection method (type) Only female thread(both socket and plug)
・Note that sockets can be connected to plugs only when their
Working pressure MPa 21.0 nominaI diameters are the same.
(Max.working pressure) （31.5） ・A female thread is used for connection. Do not over-tighten
the mating male thread.
O ring, Valve packing material : ・Foreingn matter, if allowed to adhere or enter, may cause
Viton(FMP) : −20°C∼＋180°C
Working temperature range
leakage. Do not allow any pieces of the seal tape to enter the
Applicable fluid Hydraulic oil, High pressure gas coupling.
Use Hydraulic machine, High pressure gas piping

Lt
Lp
Hs

Hp
D

Model HP Ls

(Female thread)
Thread Socket(S) Plug(P)
Assemblig
Model size Dimensions(mm) Model Dimensions(mm) length
T Mass(g) Mass(g) Lt.(mm)
（Rc） Ls Hs(φ/Face width) D(φ) C Lp Hp(Face width)
HP-2S 1/4" 49 24/19 28 15.5 135 HP-2P 33 19 45 68

HP-3S 3/8" 60 28.5/23 33.5 17 220 HP-3P 38 23 70 80

HP-4S 1/2" 72 38.5/35 43 23 480 HP-4P 45 29 140 93

HP-6S 3/4" 72 38.5/35 43 23 450 HP-6P 48 35 145 100

HP-8S 1" 93 52/46 58 26 1050 HP-8P 61 41 330 120

※Specifications are subjects to change without notice. YOSHIDA MFG. CO., LTD.
2009.2
 Series Features

KC
・ Space saving design for molds with closely spaced
for low pressure parts.
・ Long Sleeve socket facilitates
for quick replacement for connection/disconnection with plug embedded in mold.
・ Various size and end cofiguration to suit a wide
Die and Mold variety of mold application.

Socket
Sleeve
O ring
Valve packing Sleeve spring

Valve spring Ball

Stop ring
Adaptor
Plug

●Specification
Model KC-01 KC-02 KC-03
Thread size 1/8 1/4 3/8
Material of socket/ plug body Brass(C3604)
Working pressure(MPa) 1.0
Pressure resistance(MPa) 1.5
Seal material Viton(FMP)
Working temperature range -20℃～＋180℃
Applicable fluid Water

KC 　Series Socket
Ｈ
T Ｈ Ｈ
Ｔ
Ｄ2

Ｄ1
Ｄ1

Ｄ
ｄ
Ｄ
ｄ
Ｄ1

Ｄ
ｄ

Ｌ2
Ｌ2 Ｌ3 Ｌ2
Ｌ1
Ｌ1 Ｌ1

Ｌ Ｌ Ｌ

●Socket（model SM） ●Socket（model SF） ●Socket（model SH）

（ Male thread）
thread） （ Female thread)
thread) (Hose Nipple)
Thread Dimentions(mm) Mass Thread Dimentions(mm) Mass Hose Dimentions(mm) Mass
Model Model Model
Ｈ Ｈ Ｈ
Size Ｄ φＤ
φＤ Ｄ 1 φｄ
ｄ Ｌ Ｌ1 Ｌ2 Ｔ ）
(g） Size Ｄ φＤ
φＤ Ｄ 1 φｄ
ｄ Ｌ Ｌ1 Ｌ2 Ｔ ）
(g） Size Ｄ φＤ
φＤ Ｄ 1 φＤ
Ｄ 2 φｄ
ｄ Ｌ Ｌ1 Ｌ2 Ｌ3 ）
(g）
HEX HEX HEX
KC-02SM Rc1/4 21 18 6 51 29.5 18 17 R1/4 65 Ｆ
KC-02SＦ R1/4 21 18 6 51 29.5 18 17 Rc1/4 70 KC-02SH 1/4” 21 18 8 5 61 30 18 21 17 60

KC-03SM Rc3/8 21 18 6 53 29.5 18 17 R3/8 75 KC-03SH 3/8” 21 18 12 7 61 30 18 21 17 65

KC 　Series Plug
Ｈ Ｔ
Ｈ T
Ｄ1
Ｄ

ｄ
ｄ

Ｌ1 Ｌ1 Ｌ1 Ｌ2
Ｌ
Ｌ Ｌ
T
●Plug（model PM） ●Plug（model PF） ●Plug（model PH）
（ Male thread）
thread） （ Female thread)
thread) (Hose Nipple)
Thread Dimentions(mm) Mass Thread Dimentions(mm) Mass Hose Dimentions(mm) Mass
Model Ｈ Model Ｈ Model
Size ｄ
φｄ Ｌ Ｌ1 Ｔ ）
(g） Size ｄ
φｄ Ｌ Ｌ1 Ｔ ）
(g） Size ｄ ΦD φＤ
φｄ Ｄ１ Ｌ Ｌ1 Ｌ2 ）
(g）
HEX HEX
KC-01PM Rc1/8 5.5 31 15 12 R1/8 14 KC-01PF R1/8 6 28 15 14 Rc1/8 16 KC-02PH 1/4” 5 12 8 42 15 21 15

KC-02PM Rc1/4 6 34 15 14 R1/4 20 KC-02PF R1/4 6 31 15 17 Rc1/4 20 KC-03PH 3/8” 6 15 12 42 15 21 19

KC-03PM Rc3/8 6 35 15 17 R3/8 35 KC-03PF R3/8 6 32 15 21 Rc3/8 35

※ Specifications are subjects to change without notice. YOSHIDA MFG.CO.,LTD.

2010.10