Scribd Logo
Upload

Welcome to Scribd!

  • 234 views

    Water Guard Epdm Membrane

    Uploaded by

    fairmatechemical
    This document provides information on Waterguard EPDM Membrane, an ethylene propylene diene terpolymer elastomeric synthetic rubber membrane used for waterproofing. It has high elasticity, durability, tensile and tear resistance. The membrane resists UV radiation, thermal shock, and cyclic fatigue. It can withstand high temperatures while remaining intact. Waterguard EPDM Membrane is a single ply unreinforced rubber sheet available in black color.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Water Guard Epdm Membrane

    Uploaded by

    fairmatechemical
    234 views4 pages
    This document provides information on Waterguard EPDM Membrane, an ethylene propylene diene terpolymer elastomeric synthetic rubber membrane used for waterproofing. It has high elasticity, durability, tensile and tear resistance. The membrane resists UV radiation, thermal shock, and cyclic fatigue. It can withstand high temperatures while remaining intact. Waterguard EPDM Membrane is a single ply unreinforced rubber sheet available in black color.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on Waterguard EPDM Membrane, an ethylene propylene diene terpolymer elastomeric synthetic rubber membrane used for waterproofing. It has high elasticity, durability, tensile and tear resistance. The membrane resists UV radiation, thermal shock, and cyclic fatigue. It can withstand high temperatures while remaining intact. Waterguard EPDM Membrane is a single ply unreinforced rubber sheet available in black color.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    234 views4 pages

    Water Guard Epdm Membrane

    Uploaded by

    fairmatechemical
    This document provides information on Waterguard EPDM Membrane, an ethylene propylene diene terpolymer elastomeric synthetic rubber membrane used for waterproofing. It has high elasticity, durability, tensile and tear resistance. The membrane resists UV radiation, thermal shock, and cyclic fatigue. It can withstand high temperatures while remaining intact. Waterguard EPDM Membrane is a single ply unreinforced rubber sheet available in black color.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    WATERGUARD EPDM MEMBRANE

    Ethylene Propylene Diene Terpolymer Elastomeric Synthetic Rubber Membrane With High Elasticity, Durability, Tensile & Tear Resistance

    In Technical Collaboration with M/s. RBP Ltd. U. K.

    WATERGUARD EPDM MEMBRANE Waterproofing System


    DESCRIPTION
    FAIRMATE is an Indian Multi-national construction chemicals manufacturing company having offices and operations in various parts of the world. We have our Corporate office in Baroda, India and our branch offices are spread across country. FAIRMATE is serving Construction Industry for more than three decades. Apart from our existing manufacturing facilities in India, Dubai and Far-East, FAIRMATE has widened its presence to few more countries like Nepal, Pakistan, Sri Lanka, South Korea, Turkey, Lebanon and Qatar etc. FAIRMATE manufactures complete range of construction chemicals and is also providing total cost-effective solutions and World Class Services to Speciality Construction Chemical Industry by using our expertise and strategic alliances with leading partners. We have a primary technical collaboration with M/s Resin Building Products Ltd., UK and M/s Morton Chemicals, USA. Our continuous research and efforts in developing new products have resulted in introducing more than 350 products in the Civil Engineering Industry. Our products are broadly classified as Concrete Admixture, Waterproofing System, Engineering Grouts, Industrial Flooring System, Surface Treatment, Concrete Repairs, Pre-packed Concrete and Mortar, Protective Coating, Sealants, Highway Repairs and Fire Protection systems. QUALITY FOCUS FAIRMATE has set-up its plant and state-of-art R&D centres in various parts of the globe. Quality has always been an integral part of Management Philosophy. Ensuring international standard products to our esteemed customers, we have been accredited by ISO 9001 and ISO (EMS) 14001, which emphasize the quality system of each and every step of processing and 'zero' defect operations. We have gone further and have implemented ISO (OHSAS) 18001, which relates to total operational Health and Safety. To ensure Total Customer Satisfaction FAIRMATE is now marching towards SIX SIGMA. We are proud to share with you that FAIRMATE has now become the member of IGBC - Indian Green Building Council, Hyderabad. We are now part of Green Building movement.

    BENEFITS
    < < < < < < < Resistance to ultra violet (UV) radiation Resistance to thermal shock Resistance to cyclic fatigue High tensile and tear resistance Higher flexibility Remain in elastic condition for longer period during its life WATERGUARD EPDM MEMBRANE can withstand high temperatures while remaining intact.

    WATERGUARD EPDM MEMBRANE (Ethylene Propylene Diene Terpolymer) membrane is a 100% cured unreinforced single ply elastomeric compound (synthetic rubber membrane) manufactured from ethylene, propylene and a small amount of diene monomer. WATERGUARD EPDM MEMBRANE is available in black colour. The EPDM membrane is a vulcanized / thermo set membrane that has been fully cured in the manufacturing process. EPDM membrane has stable physical properties, which makes repairs easier in the unlikely event of cuts or tears.

    VALUES The values that drive us underscore our commitment to: Customer Delight : consistently surpass customer expectations. FAIRMATE also ensures application of the products through authorized trained applicators. FAIRMATE caters to a large group of customers ranging from multinational companies to individual domestic customers. We have a wide network in India as well as internationally.

    USES
    WATERGUARD EPDM MEMBRANE is used in < Roof waterproofing system < Flat concrete roofs < Terrace It can be used for seals, adhesives and moulded flexible parts.
    BENGALURU FACTORY BHUBANESWAR FACTORY

    < < < < < < < < < <

    Africa Bangladesh Bhutan Nepal Qatar Singapore Srilanka Thailand U.A.E Vietnam

    TYPICAL PROPERTIES
    < < < < < < < < < < < Colour Thickness of the sheet Specific Weight Tensile Strength(ASTM D 412) Tear Strength(ASTM D 624) Elongation(ASTM D 412) UV Resistance at 45C(ASTM D 1149) Brittleness Temperature (ASTM D 746) Resistance to water absorption(ASTM D 471) Polymer (EPDM) Content (ASTM D 297) Water Vapor Permeability(ASTM E 96) : : : : : : : : : : : Black 1.5 mm. 1.71 kg/m 9 Mpa 26.4 KN/m 310% No cracks -45C +8, -2 % 100% 0.10

    APPLICATION OF WATERGUARD EPDM MEMBRANE


    INSTALLATION OF MEMBRANE
    The water proofing EPDM sheets are bonded to the roof surface which is clean and free from oil, grease and other contaminants. In this method, the main area of covering is bonded to its substrate with bonding adhesive.The surface undulations shall be made up with screed concrete before applying the covering. First the roof sheet is placed in its proper position, and adhesive is applied with the brush or roller. The rubber sheet is then unrolled over the fresh adhesive layer and roller worked until it is flat and free from wrinkles. Alternatively, sheets can be laid loose, with rounded pebbles at the top, which is called ballasted system. Sufficient counter weight is required to be provided on the surface to prevent uplift due to wind pressure.

    SEAMING
    All side and end laps to be joined with a 100 mm wide, adhesive bonded splice. Roll seams with a 50 mm wide silicone rubber roller, both across the seam and along its' entire length. On small surfaces, seams can also be executed with contact adhesives instead of self-adhesive tapes.

    PREPARATION OF THE SUBSTRATE


    Concrete surface shall be structurally sound and dry to the touch. The waterproofing sheet shall be applied on the roof surface after completion of curing period. Roof slope should be a minimum of 2% to allow for adequate drainage of the roof. All debris and non-adherent areas of the existing bitumen roof finish shall be removed. Blisters and buckles will be cut open and sealed; defects shall be repaired by gentle warming and redressing. All outlets must be protected to prevent debris entering and causing blockage of down pipes. The roof surface will be made clean, dry, smooth and free of contaminants such as grease, animal fats, coal tar and oil based products. All sharp edges, fins and rough surfaces that could damage the membrane shall be removed or if they can't be removed, isolated from the membrane with a leveling layer. If the surface is rough or uneven, a finishing cement mortar grade 1:3 shall be provided over the surface. Ponding of water must be removed from the work surface prior to installing the system.

    EXPANSION JOINTS
    Following procedure shall be followed to treating the expansion joints of roof and walls. The expansion joints shall be thoroughly cleaned including chipping of existing mortar, thermocol / shalitex board etc. up to a depth of 200 mm. The expansion joint shall be filled with polysulphide sealant (gun grade) with polysterene board (thermocol sheet) of 50 mm thick and 50 mm wide as a backing material. Polysulphide sealant (gun grade) shall be applied over the thermocol sheet to have a watertight surface. The expansion joint is covered with a sheet of WATERGUARD EPDM MEMBRANE, membrane glued to either side of the expansion joint using an appropriate fastening system. EPDM roof waterproofing shall be carried out over this treatment.

    PACKING
    Materials delivered at site shall be clearly marked with legible and intact labels. The products (adhesives etc.) shall be in original, unopened containers. Materials shall be stored in areas where temperatures conform with manufacturer's recommendations and instructions.

    HEALTH & SAFETY


    There are no direct health hazards associated with WATERGUARD EPDM MEMBRANE. Normal precautions for hot and volatile substances should be observed during application.

    SPECIFICATION
    WATERGUARD EPDM MEMBRANE is a synthetic rubber membrane used in roof waterproofing system, used strictly in accordance with the instruction of FAIRMATE.

    Our related range of products :


    WATERGUARD MEMBRANE APP & SBS
    Is a high quality, APP (Attactic PolyPropylene) & SBS (Styrene Butadiene Styrene) modified bituminous torch-on membrane used for tanking and waterproofing of substructure and superstructure areas in buildings and civil engineering projects, implemented in big industrial structures, in commercial centres and also in big residentials, requires high quality waterproofing system. Available in rolls of 10m (length) x 1m (width).

    WATERGUARD MEMBRANE PVC


    Is a high polymer underground waterproofing membrane available at 1.5mm thickness and is not compatible with bitumen. It requires no adhesives or primers for installation and is resistant to high temperature fluctuations. Also, it is highly flexible throughout its life span and requires no fire requirement for application. It is used in roofing / reroofing systems, tanking of underground structures, lining of drinking water tanks and swimming pools, etc.

    WATERGUARD LIQUID MEMBRANE


    Is a single component high performance waterproofing membrane and has high build properties, ensures rapid application, High elasticity, Excellent adhesion, Outstanding resistance to oxidation, highly elastic tough waterproofing system. Coverage : 4.5m/ltr. at 1mm WET depending upon the substrate condition.

    INDIA
    BARODA : 8/1, "SAI SUDHA", Arunoday Society, Alkapuri, Baroda-390 007. Tel. : (0265) 2358173-74, 2331193, 2331399 Fax : (0265) 2338733 Email : [email protected] AHMEDABAD : 3, Ramkrupa Appartment, B/h Center Point, Panchvati 1st Lane, Ambawadi, Ahmedabad-380 006. Tel. : (079) 26465219 Tel./Fax : 26465577 BENGALURU : Tel. (080) 23639852 Tel./Fax : (080) 23639851 Email : [email protected] DELHI : Tel./Fax : (011) 27306224/82 Mobile 9810032422 Email : [email protected] KOLKATA : Tel. : (033) 24404932 MUMBAI : Tel. : (022) 28794045, 28794044 Mobile 9820291610 Email : [email protected] UDAIPUR : Mobile 09829699943 JAIPUR : Mobile 09829688843 LUCKNOW : Mobile 9415022470 SANGLI : Mobile 09850817020 PANIPAT : Mobile 09813972551 KOCHI : Mobile 09847169473 AGRA : Mobile 09719402888 JALANDHAR : Mobile 09815039539

    DUBAI
    Hamriyah Free Zone, P.O. BOX No. : 42023, Sharjah, UAE. Tel. : +9716 5261052, Fax : +9716 5261053 Mobile : +971 50 4355048 email : [email protected] AFRICA NEPAL OMAN PAKISTAN QATAR SAUDI ARABIA SINGAPORE SRI LANKA

    For more details visit us at: www.fairmate.com | www.waterproofing4u.com

    FM/10/10/A

    The information given in this data sheet is based on both the current development work and many years of field experience. Whilst every effort is made to ensure that the information is reliable, we cannot accept the responsibility for any work carried out with our materials as we have no control over methods of application, site conditions etc. In view of the continuing research and development being undertaken in our laboratories we advise customers in their own interest to ensure that this data sheet has not been supersede by a more up-to-date publication. All products are sold subjected to our standard conditions of sale which are available on request. Field services, where provided, does not constitute supervisory responsibility. For additional information, please contact our local FAIRMATE representative.

    You might also like