Scribd
Upload
119 views1 page

Liftmaster 374ut Mini Universal Remote: Comparison Programming Chart

Programación

Uploaded by

Fem Espinoza Alvarado
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views1 page

Liftmaster 374ut Mini Universal Remote: Comparison Programming Chart

Programación

Uploaded by

Fem Espinoza Alvarado
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

L I F T M A S T E R® 3 7 4 U T M I N I U N I V E R S A L R E M O T E

C O M PA R I S O N P R O G R A M M I N G C H A RT
Garage Door Opener Type/Learn Frequency Opener Model Programming
Manufacture Year Button Code Numbers*

8365W-267 1. Press and release the garage door openers Learn Button
Security+ 2.0 8550W, 8587W,
8557W, 8360W, 2. Press and hold the button on the remote that you would like to program
Chamberlain®/LiftMaster®: 310 MHz
8355W, 8365-267, 3. Opener lights will flash
2011- Current 315 MHz 8160, 8165, 8155,
4. Programming is complete
390 MHz 8065, 8550, 8587,
8557, 8360, 8355 *If the above steps do not work, follow steps below as if your unit has a purple program button

Security+ 2.0
Chamberlain®/LiftMaster®: 310 MHz
2013- Current
LEARN 8500 Please note: Learning a remote is done in the wall control panel (888LM). Please see 8500 owners manual
315 MHz
390 MHz

1. Start with garage door closed


1345/1355, 1356,
3220, 3255, 3240, 2. Press and hold the bottom button in the remote until the blue LED stays solid then release the button
Chamberlain/LiftMaster: Security+
3265, 3270, 3280, 3. Press and release the Program/Learn button on the garage door button
2005 - 2011 315 MHz 3800, 3500, 3850,
4. On the remote, press and release the button you would like to program twice then wait for the door to move
3585, 3595
5. Once the door moves, press either button to exit program mode. Programming is complete

1. Start with garage door closed


1245R/1255R,
1265R, 2220, 2. Press and hold the bottom button in the remote until the blue LED stays solid then release the button
Chamberlain/LiftMaster: Security+
2245/2255, 2265, 3. Press and release the Program/Learn button on the garage door button
1997 - 2004 390 MHz 2280, 2500, 2575,
4. On the remote, press and release the button you would like to program twice then wait for the door to move
2585, 2595
5. Once the door moves, press either button to exit program mode. Programming is complete

1. Start with garage door closed


2. Press and hold the bottom button in the remote until the blue LED stays solid then release the button
Chamberlain/LiftMaster: Billion Code 1245/1255
3. Press and release the Program/Learn button on the garage door button
1993 - 1997 390 MHz 1270/1280
4. On the remote, press and release the button you would like to program twice then wait for the door to move
5. Once the door moves, press either button to exit program mode. Programming is complete

1. Start with garage door closed


2. Press and hold the bottom button in the remote until the blue LED stays solid then release the button
3. Press and release the Program/Learn button on the garage door button
4. On the remote, press and release the button you would like to program twice then wait for the door to move
Genie: Intellicode II 5. Once the door moves, press either button to exit program mode. Programming is complete
Intellicode II 315, 390 MHz
2005 - Current compatible models
6. Using the Genie Intellicode 2 remote, press and release the button that is already programmed to the opener
and both LED’s will flash purple
7. On the mini remote, press and release the button that you would like to program 3 times. The blue LED will
blink for up to 60 seconds
8. The garage door will open and programming is completed

Linear: Mega-Code
1997 - Current Mega-Code 318 MHz compatible models 1. Start with garage door closed
Genie: Intellicode 2. Press and hold the bottom button in the remote until the blue LED stays solid then release the button
1995 - Current Intellicode 390 MHz compatible models
3. Press and release the Program/Learn button on the garage door button
Stanley: Secure Code
1998 Secure Code 310 MHz compatible models 4. On the remote, press and release the button you would like to program twice then wait for the door to move

Wayne Dalton: Rolling Code 5. Once the door moves, press either button to exit program mode. Programming is complete
1999 Rolling Code 372.5 MHz compatible models

*Not all available model numbers are listed.

© 2017 LiftMaster All Rights Reserved


300 Windsor Dr, Oak Brook, IL 60523
LiftMaster.com
LMACENCT374UT

You might also like