K to 12 BASIC EDUCATION CURRICULUM

TECHNOLOGY LIVELIHOOD EDUCATION

INFORMATION AND COMMUNICATIONS TECHNOLOGY - COMPUTER HARDWARE SERVICING
GRADE 7/8 (Exploratory)
Course Description:
This is an exploratory and introductory course which leads to a Computer Hardware Servicing National Certificate Level II (NC II). It covers five common
competencies that a Grade7/Grade 8 Technology and Livelihood Education (TLE) student ought to possess: 1) use of tools; 2) maintaining tools, equipment and
paraphernalia; 3) performing mensuration and calculation; 4) interpreting technical drawing and plans; and 5) practicing Occupational Health and Safety (OHS) procedures.
The preliminaries of this exploratory course include the following: 1) discussion on the relevance of the course; 2) explanation of key concepts relative to the course;
and 3) exploration of career opportunities.

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES

Introduction The learner demonstrates The learner independently 1. Discuss the relevance of the
1. Relevance of the course understanding basic concepts demonstrates common course
2. Basic concepts in Computer and underlying theories of competencies in computer 2. Explain basic concepts in
Hardware Servicing computer hardware servicing. hardware servicing as computer hardware servicing
3. Career opportunities prescribed by TESDA Training 3. Explore opportunities in
Regulations. computer hardware servicing
as a career
LESSON 1: PERSONAL ENTREPRENEURIAL COMPETENCIES - PECs (PC)
1. Assessment of Personal The learner demonstrates The learner recognizes his/her LO 1. Recognize PECs needed TLE_PECS7/8-00-1
Entrepreneurial Competencies understanding of one’s PECs in PECs and prepares an activity in Computer Hardware
and Skills (PECs) vis-à-vis a relation to computer hardware plan that aligns with the PECs of Servicing
practicing entrepreneur/ servicing. a practitioner/entrepreneur’s in 1.1 Assess one’s PECs:
employee’s computer hardware servicing. characteristics, attributes,
1.1 Characteristics lifestyle, skills, traits
1.2 Attributes 1.2 Assess practitioner’s PECs:
1.3 Lifestyle characteristics, attributes,
1.4 Skills lifestyle, skills, traits
1.5 Traits 1.3 Compare one’s PECS with
that of a practitioner/
2. Analysis of PECs in relation to entrepreneur’s
a practitioner’s 1.4 Align one’s PECS with those
of a
practitioner/entrepreneur’s
LESSON 2: ENVIRONMENT AND MARKET (EM)
1. Key concepts of Environment The learner demonstrates The learner independently LO 1. Generate a business TLE_EM7/8-00-1
and Market understanding of the concepts generates a business idea based idea that relates with a career
2. Products and services of environment and market on the analysis of environment choice in Computer Hardware
available that relate with a career choice and market in computer Servicing
in the market in computer hardware hardware servicing. 1.1 Conduct SWOT analysis
3. Differentiation of products and servicing. 1.2 Identify the different
services products/services available in
4. Customers and their buying the market

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 1 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES
habits 1.3 Compare different
5. Competition in the market products/services in
6. SWOT Analysis computer hardware servicing
business
1.4 Determine the profile
potential customers
1.5 Determine the profile
potential competitors
1.5 Generate potential business
idea based on the SWOT
analysis
LESSON 3: USE OF HAND TOOLS AND EQUIPMENT (UT)
1. Hand tools in computer The learner demonstrates The learner independently uses LO 1. Prepare hand tools and TLE_ICTCS7/8UT-0a-1
hardware servicing understanding of the use of hand tools and equipment for equipment for computer
2. Equipment in computer hand tools and equipment for computer hardware servicing. hardware servicing
hardware servicing computer hardware servicing. 1.1 Prepare hand tools and
equipment according to
function and task
requirement
3. Procedure in accomplishing LO 2. Inspect hand tools and TLE_ICTCS7/8UT-0b-2
forms: equipment received
3.1 Job order slips 1.2 Check the list of tools and
3.2 Tools and materials equipment to be requested
requisition slips per job requirement
3.3 Borrower’s slip 2.2 Inspect the requested tools
4. Requisition procedures and equipment
2.3 Assess the condition of all
hand tools and equipment for
proper operation and safety
LESSON 4: MAINTAIN HANDTOOLS, EQUIPMENT AND PARAPHERNALIA (MT)
1. Safety procedures in using The learner demonstrates The learner independently LO 1. Use and maintain hand TLE_ICTCS7/8MT-0c-
hand tools and equipment understanding of concepts and maintains the tools, equipment tools, measuring instrument d-1
2. Procedures in cleaning, underlying principles in and paraphernalia for computer and equipment
tightening and simple repair maintaining the tools, hardware servicing. 1.1 Perform safety procedures in
of hand tools, equipment and equipment and paraphernalia using hand tools and
paraphernalia for computer hardware equipment
3. Common malfunction in hand servicing. 1.2 Follow procedures in
tools, equipment and cleaning, tightening and
paraphernalia simple repair of hand tools,
4. Reporting to property equipment and paraphernalia
custodian 1.3 Identify common malfunction

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 2 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES
(unplanned or unusual
events) when using tools,
equipment and paraphernalia
1.4 Follow procedures in
preparing a report to
property custodian
LESSON 5: PERFORM MENSURATION AND CALCULATION (MC)
1. Types of components and The learner demonstrates The learner independently LO 1. Perform basic TLE_ICTCS7/8MC-0e-1
objects to be measured: understanding of concepts and performs accurate mensuration
1.1 Memory underlying principles in measurements and calculations 1.1 Identify object/s to be
1.2 Data storage capacity performing measurements and based on a given tasks. measured
1.3 Processor calculations. 1.2 Use the correct
1.4 Video card specifications as specified in
2. Correct specifications of the the operating system
relevant sources
3. Conversion and calculation LO 2. Carryout mensuration TLE_ICTCS7/8MC-0f-2
3.1 Capacity and speed and calculation
3.2 Memory 2.1 Perform calculation needed to
3.3 Data storage complete task using the four
3.4 Processor mathematical fundamental
3.5 Video card operations (addition,
subtraction, multiplication and
division)
2.2 Employ different techniques in
checking accuracy of the
computation
LESSON 6: PREPARE AND INTERPRET TECHNICAL DRAWING (TD)
1. Basic symbols The learner demonstrates The learner independently LO 1. Identify different kinds TLE_ICTCS7/8TD-0g-1
2. Basic Elements understanding of concepts and prepares and interprets of technical drawings
2.1 Schematic diagram underlying principles in technical drawings and work 1.1 Identify basic symbols used in
2.2 Charts preparing and interpreting plans accurately. technical drawing
2.3 Block diagrams technical drawings and work 1.2 Select technical drawing in
2.4 Layout plans plans for computer hardware accordance with the job
2.5 Loop diagram servicing. requirement

3. Flowchart interpretation LO 2. Interpret technical TLE_ICTCS7/8TD-0h-2

3.1 Types of flowchart drawing
2.1 Identify the basic symbols
used in flow charting
2.2 Interpret the symbols used in
flow charting

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 3 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODES
2.3 Create a flowchart that depicts
a simple scenario
LESSON 7: PRACTICE OCCUPATIONAL HEALTH AND SAFETY PROCEDURES (OS)
1. Hazards and risks control The learner demonstrates The learner consistently LO 1. Identify hazards and TLE_ICTCS7/8OS-0i-1
1.1 safety regulations understanding of concepts and observes and practices risks
1.2 indicators of hazard and underlying principles of occupational health and safety 1.1 Explain hazards and risks in
risks Occupational Health and Safety procedures in the workplace. the workplace
1.3 contingency measures (OHS) procedures in relation to 1.2 Identify hazards and risks
hazards and risks in the indicators in the workplace
workplace. 1.3 Apply contingency measures
in accordance with the OHS
procedures
2. Evaluation of hazards and LO 2. Evaluate hazards and TLE_ICTCS7/8OS-0j-2
risks risks
2.1 Effects of hazards and 2.1 Determine the effects of
risks in the work place hazards and risks
2.2 Classify the types of hazards
and risks in the workplace
3. Hazards and risks control LO 3. Control hazards and TLE_ICTCS7/8OS-0j-3
3.1 Safety regulation risks
3.1 Follow OHS Procedures for
controlling hazards and risks
3.2 Use personal protective
equipment (PPE)
3.3 Follow and observe
organizational protocol when
providing emergency
assistance
4. Maintenance of OHS LO 4. Maintain occupational TLE_ICTCS7/8OS-0j-4
procedures awareness health and safety regulations
5. OHS procedures, practices 4.1 Participate in related drills and
and regulations training
4.2 Prepare OHS personal records
in accordance with workplace
requirements

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 4 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
INFORMATION AND COMMUNICATIONS TECHNOLOGY - COMPUTER HARDWARE SERVICING
Grade 9 (Specialization)
Course Description:
This is a specialization course which leads to a Computer Hardware Servicing National Certificate Level II (NC II). It covers two core competencies that a Grade
9 Technology and Livelihood Education (TLE) student ought to possess: 1) installing computer systems and networks; and 2) diagnosing and troubleshooting computer
systems.
The preliminaries of this specialization course include the following: 1) discussion on the relevance of the course; 2) explanation of key concepts relative to the
course and; 3) exploration of career opportunities.

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE

Introduction The learner demonstrates The learner independently 1. Discuss the relevance of the
1. Relevance of the course understanding of basic provides quality and marketable course
2. Basic concepts and core concepts, underlying theoriesservice in computer hardware 2. Explain basic concepts,
competencies in Computer and core competencies in servicing in terms of computer theories and core
Hardware Servicing computer systems and systems and networks competencies in computer
3. Career opportunities networks. installation, and diagnoses and hardware servicing
troubleshoots computer 3. Explore opportunities in
systems as prescribed by computer hardware
TESDA Training Regulations. servicing as a career
LESSON 1: PERSONAL ENTREPRENEURIAL COMPETENCIES - PECs (PC)
1. Assessment of Personal The learner demonstrates The learner recognizes his/her LO 1. Recognize PECs TLE_PECS9-I0-1
Competencies and Skills (PECs) understanding of one’s PECs in PECs and prepares an activity needed in Computer
vis-à-vis a practicing entrepreneur/ in computer hardware plan that aligns with the PECs Hardware Servicing
employee in locality servicing. of a practitioner/entrepreneur’s 1.1 Assess one’s PECs:
1.1 Characteristics in the computer hardware characteristics, attributes,
1.2 Attributes servicing business.. lifestyle, skills, traits
1.3 Lifestyle 1.2 Assess practitioner’s PECs:
1.4 Skills characteristics, attributes,
1.5 Traits lifestyle, skills, traits
2. Analysis of PECs in relation to 1.3 Compare one’s PECs with
a practitioner’s that of a practitioner
3. Align, strengthen and develop /entrepreneur’s
ones PECs based on the 1.4 Align one’s PECs with those
results of a
practitioner/entrepreneur’s
LESSON 2: ENVIRONMENT AND MARKET (EM)
1. Market (Town) The learner demonstrates The learner independently LO 1. Recognize and TLE_EM9-I0-1
2. Key concepts of Market understanding of environment creates a business vicinity map understand the market in
3. Players in the market and market in computer reflective of the potential computer hardware
(Competitors) hardware servicing in one’s computer hardware servicing servicing
4. Products and services available locality. market within the locality. 1.1 Identify the players/
in the market competitors within the town

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 5 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
1.2 Identify the different
products/services available
in the market
5. Market (Customer) LO 2. Recognize the TLE_EM9-I0-2
6. Key concepts of identifying potential customer/market
and understanding the in computer hardware
consumer servicing
7. Consumer Analysis through: 2.1 Identify the profile of
7.1 Observation potential customers
7.2 Interviews 2.2 Identify the customer’s
7.3 Focus Group Discussion needs and wants through
7.4 Survey consumer analysis
2.3 Conduct consumer/market
analysis
LESSON 3: INSTALLING COMPUTER SYSTEMS AND NETWORKS (CN)
1. OHS policies and procedures The learner demonstrates The learner independently LO 1.Plan and prepare for TLE_ICTCS9CN-Ia-1
2. Occupational Health and understanding of planning, demonstrates the correct installation
Safety laws installing and testing computer planning, installing and testing 1.1 Observe OHS policies and
3. Personal safety systems and networks. of computer systems and procedures in planning for
4. Workplace hazards networks. installation activity in
5. Environment laws accordance with
6. Computer Peripherals/ Devices requirements
/Systems 1.2 Familiarize oneself with
7. Personal computer computer peripheral/
systems and devices devices/systems in
8. Peripherals accordance with established
9. Networking devices procedures correct
10. Tools, equipment and operation and safety
testing devices 1.3 Consult appropriate/
technical personnel to
ensure that work is
coordinated with others
who are involved in the
activity
1.4 Determine the location of
the devices/systems to be
used
1.5 Obtain materials necessary
to complete the work in
accordance with established
procedures

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 6 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
1.6 Check the materials
received against job
requirements
11. Requirements for the job LO 2. Install equipment/ TLE_ICTCS9CN-If-j-2
12. Job orders devices and systems
13. Request forms 2.1 Follow OHS procedures in
14. Report sheets installing devices, systems,
15. Safety procedures networking devices, and
16. System’s specifications peripherals
17. Installation of equipment/ 2.2 Comply with the
devices, peripherals and requirements in installing
networking devices devices,/systems,
18. Install computer systems networking devices, and
19. Basic computer configuration set peripherals TLE_ICTCS9CN-IIa-g-
up 2.3 Install computer systems, 2
networking devices and
peripherals in accordance
with job requirements
2.4 Perform variations in
installing devices and
systems in accordance with
customer/client’s
requirements
2.5 Obtain approval from
appropriate personnel
before implementing
contingency procedures
2.6 Respond to unplanned
events or conditions in
accordance to established
procedures
2.7 Check the quality of the
work undertaken in
accordance with the
established procedures
20. Safety procedures LO 3. Conduct test on the TLE_ICTCS9CN-IIh-j-3
21. Burning or testing installed installed computer system
equipment/devices 3.1 Follow OHS policies and
22. Computer network systems procedures in conducting
connectivity tests
23. Reporting and documentation 3.2 Check circuits and systems

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 7 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
procedures being isolated using
specified testing procedures
3.3 Test devices, systems
and/or installation to
determine its conformity
with the requirements
3.4 Undertake final inspections
on the installed devices,
systems to ensure
conformity with the
requirement
3.5 Accomplish technical
reports on the tests
conducted
3.6 Follow procedures in
forwarding documentation
to appropriate personnel
and/or authority on the test
conducted
LESSON 4: DIAGNOSING AND TROUBLESHOOTING COMPUTER SYSTEMS (DT)
1. Safety precautions The learner demonstrates The learner independently LO 1. Plan and prepare for TLE_ICTCS9DT-IIIa-g-
2. Types of computer systems errors understanding of the diagnoses and troubleshoots diagnosis of computer 1
3. Diagnosing computer systems underlying concepts and computer systems as prescribed systems errors
4. Manual diagnosis principles of diagnosing and by TESDA Training Regulations. 1.1 Follow OHS procedures in
5. Software diagnosis troubleshooting computer planning and preparing
systems. diagnosis of computer
systems errors
1.2 Determine the computer
systems errors using
manual and software
diagnosis
6. Safety precautions LO 2. Diagnose and TLE_ICTCS9DT-IIIf-j-
7. Basic concepts of Electricity configure computer systems 2
8. Techniques for diagnosing and networks
computer systems 2.1 Follow OHS procedures in
9. Diagnosing tools: planning and preparing
9.1 Manual diagnosis of computer
9.2 Software systems and network errors
10. Computer systems and network 2.2 Identify the diagnosed
configurations computer systems and

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 8 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
network errors based on
the job requirements
2.3 Configure computer
systems and networks
11. Safety precautions LO 3. Inspect and test the TLE_ICTCS9DT-IVa-g-
12. Determining defective configured computer 3
components systems and networks
13. Repairing/replacing different 3.1 Follow OHS procedures in
components inspecting and testing
13.1 Wiring techniques configured computer
13.2 Power supplies systems and networks
14. Basic networking errors 3.2 Inspect configured computer
systems and networks
3.3 Replace defective
components
3.4 Reinstall defective computer
systems
3.5 Identify network errors
3.6 Repair network errors based
on standard procedures
3.7 Test the configured
computer systems and
networks

15. Safety precautions LO 4. Test Systems and TLE_ICTCS9DT-IVh-j-

16. Guidelines for testing computer Networks 3
systems and networks 4.1 Follow OHS procedures in
testing systems and
networks
4.2 Test computer systems and
networks in accordance with
the job requirements
4.3 Accomplish technical reports
on the tests conducted

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 9 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
INFORMATION AND COMMUNICATIONS TECHNOLOGY - COMPUTER HARDWARE SERVICING
Grade 10 (Specialization)
Prerequisite: Grade 9 Computer Hardware Servicing
Course Description:
This is a specialization course which leads to a Computer Hardware Servicing National Certificate Level II (NC II). It covers two core competencies that a Grade
10 Technology and Livelihood Education (TLE) student ought to possess: 1) configuring computer systems and networks; and 2) maintaining computer systems and
networks.
The preliminaries of this specialization course include the following: 1) discussion on the relevance of the course; 2) explanation of key concepts relative to the
course and; 3) exploration of career opportunities.

CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE

Introduction The learner demonstrates The learner independently 1. Discuss the relevance of the
1. Relevance of the understanding of basic concepts demonstrates competencies in course
course and underlying theories in configuring and maintaining 2. Explore opportunities in
2. Basic concepts in configuring and maintaining computer systems and networks computer hardware
Computer Hardware computer systems and networks. as prescribed by TESDA Training servicing as a career
Servicing Regulations. 3. Explain basic concepts in
3. Career opportunities computer hardware
servicing
LESSON 1: PERSONAL ENTREPRENEURIAL COMPETENCIES - PECs (PC)
1. Assessment of Personal The learner demonstrates The learner independently LO 1. Develop and strengthen TLE_PECS10-I0-1
Competencies and Skills understanding of one’s PECs in creates a plan of action that PECs needed in Computer
(PECs) vis-à-vis those of a computer hardware servicing. strengthens/ further develops Hardware Servicing
practicing one’s PECs in computer 1.1 Identify areas for
entrepreneur/employee in a hardware servicing. improvement, development
province. and growth
1.1 Characteristics 1.2 Align one’s PECs according
1.2 Attributes to his/her business/career
1.3 Lifestyle choice
1.4 Skills 1.3 Create a plan of action that
1.5 Traits ensures success of his/her
2. Analysis of PECs in relation to business/career choice
a practitioner
3. Application of PECs to the
chosen business/career
LESSON 2: ENVIRONMENT AND MARKET (EM)
1. Product Development The learner demonstrates The learner independently LO 1. Develop a TLE_EM10-I0-1
2. Key concepts of developing a understanding of environment and creates a business vicinity map product/service in computer
product market in computer hardware reflective of the potential hardware servicing
3. Finding Value servicing in one’s computer hardware servicing 4.1 Identify what is of “value” to
4. Innovation town/municipality. market in one’s the customer
4.1 Unique Selling town/municipality. 4.2 Identify the customer to sell
Proposition (USP) to

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 10 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
4.3 Explain what makes a
product unique and
competitive
4.4 Apply creativity and
innovative techniques to
develop marketable product
4.5 Employ a Unique Selling
Proposition (USP) to the
product/service
5. Selecting a Business Idea LO 2. Select a business idea TLE_EM10-I0-2
6. Key concepts in selecting based on the criteria and
a business Idea techniques set
6.1 Criteria 2.1 Enumerate various criteria
6.2 Techniques and steps in selecting a
business idea
2.2 Apply the criteria/steps in
selecting a viable business
idea
2.3 Determine a business idea
based on the
criteria/techniques set
7. Branding LO 3. Develop a brand for the TLE_EM10-I0-3
product
3.1 Identify the benefits of
having a good brand
3.2 Enumerate recognizable
brands in the town/province
3.3 Enumerate the criteria for
developing a brand
3.4 Generate a clear appealing
product brand
LESSON 3: CONFIGURING COMPUTER SYSTEMS AND NETWORKS (CC)
1. Safety procedures The learner demonstrates The learner independently LO 1. Plan and prepare for TLE_ICTCS10CC-Ia-
2. Inspecting work instructions understanding of the underlying demonstrates skills in configuration c-1
according to job requirements concepts and principles in configuring computer systems 1.1 Follow OHS in planning and
3. Planning and preparing of configuring computer systems and and networks as prescribed by preparing for configuration
standard operating procedures networks. TESDA Training Regulations. of computer systems and
4. Procedures in using the tools networks
and equipment 1.2 Prepare computer systems,
tools, devices, equipment
and materials

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 11 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
1.3 Check computer systems
and networks configuration
against specified
requirements
1.4 Identify the procedures in
using the tools and
equipment
5. Safety precautions LO 2. Configure computer TLE_ICTCS10CC-IId-
6. Networking devices, media . systems and networks f-2
and connectors 2.1 Follow OHS procedures in
7. Internet Protocols (IP) configuring computer
8. Network Security systems and networks
9. File and Printer Sharing 2.2 Inspect networking devices,
media and connectors
2.3 Create cross-over and
straight-through cables
2.4 Assign IP address to clients
and servers TLE_ICTCS10CC-IIg-
2.5 Configure the assigned IP 2
address to clients and
servers
2.6 Enable network security to
the computer systems
2.7 Configure file and printer
sharing

10. Safety precautions LO 3. Inspect and test TLE_ICTCS10CC-IIh-

11. Guidelines for testing configured computer j-3
computer systems and Systems and networks
networks 1.1 Follow OHS procedures in
testing systems and networks
1.2 Test computer systems and
networks in accordance with
the job requirements
1.3 Accomplish technical reports
on the tests conducted

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 12 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
LESSON 4: MAINTAINING COMPUTER AND NETWORK SYSTEMS (MN)
1. Safety procedures The learner demonstrates The learner independently LO 1.Plan and prepare for the TLE_ICTCS10MN-
2. Procedures in planning and understanding of the underlying demonstrates skills in computer maintenance of computer IIIa-e-1
conducting maintenance concepts and principles in and network systems as systems and networks
3. Identification and diagnoses of maintaining computer and prescribed by TESDA Training 1.1 Follow OHS procedures in
faulty computer and networks networks systems. Regulations. maintaining computer
systems systems and networks
4. Tools and tests equipment 1.2 Plan on how to maintain
5. PC specifications computer and networks
6. Network functions and systems
specifications 1.3 Identify faulty computer
and networks systems
1.4 Identify tools in maintaining
computer and network
systems
1.5 Inspect testing
equipment/devices
1.6 Check PC specifications
1.7 Verify network functions and
specifications
7. Safety procedures LO 2. Maintain computer TLE_ICTCS10MN-
8. Diagnosis and identification of systems IIIf-j-2
faulty systems 2.1 Follow OHS procedures in
9. Diagnostics software maintaining computer
10. Repair or replace faulty system systems
11. Maintenance of computer 2.2 Identify faulty computer
systems systems
11.1 Procedures in cleaning 2.3 Test normal functions of
hardware components computer systems
11.2 Defragment 2.4 Perform repair and
11.3 Scandisk replacement of faulty
11.4 Delete temporary files computer systems
11.5 Uninstall unused 2.5 Adhere to the recommended
Programs schedule and techniques in
maintaining and cleaning
computer systems
2.6 Respond to sudden
breakdowns of computer
systems in accordance with
established procedures

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 13 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
12. Safety procedures LO 3. Maintain network TLE_ICTCS10MN-
13. Procedures in maintaining systems IVa-e-3
network systems 3.1 Follow OHS procedures in
14. Diagnostics software maintaining network
15. Repair or replace faulty systems systems
and cables 3.2 Identify procedures in
16. Burn-in test computer system maintaining network
systems
3.3 Check or run the diagnostic
software
3.4 Adhere to the
recommended schedule
and techniques in
maintaining and cleaning
network systems
3.5 Respond to sudden
breakdowns of network
systems in accordance with
established procedures
3.6 Run the burn-in test on
computer systems
17. Safety procedures LO 4. Inspect and test TLE_ICTCS10MN-
18. Maintenance of computer configured/repaired computer IVf-j-4
systems and networks systems and networks
19. Computer communications 4.1 Follow OHS procedures in
20. Internet connectivity maintaining network
21. Burn-in test repaired computer systems
systems and networks 4.2 Maintain the computer
22. Documentation of tasks systems and networks to
ensure safe operations
4.3 Run or conduct computer
to computer
communications
4.4 Connect computer systems
to the internet
4.5 Check computer systems
and network to ensure safe
operation
4.6 Run the burn-in test on
computer systems
4.7 Conduct final inspection on

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 14 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE
the tests undertaken
4.8 Prepare technical reports
that comply with job requirements

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 15 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER HARDWARE SERVICING
GLOSSARY

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 16 of 17
 K to 12 BASIC EDUCATION CURRICULUM
TECHNOLOGY LIVELIHOOD EDUCATION
INFORMATION AND COMMUNICATIONS TECHNOLOGY – COMPUTER HARDWARE SERVICING

Code Book Legend

Sample: TLE_HETL12MT-IVj-16
DOMAIN/ COMPONENT CODE
LEGEND SAMPLE
Technology and Personal Entrepreneurial Competencies PECS
Livelihood Education_
Learning Area and Information and
Strand/ Subject or Communications Environment and Market EM
Specialization Technology TLE_ICT
Computer Hardware CS
First Entry Use of Hand Tools and Equipment UT
Servicing 10

Maintain Hand Tools, Equipment, and

MT
Grade Level Grade 12 Paraphernalia

Perform Mensuration and Calculation MC

Maintaining
Domain/Content/
Uppercase Letter/s Computer Networks MN
Component/ Topic Prepare and Interpret Technical Drawing ID
and Systems

-
Practice Occupational Health and Safety Procedures OS
Roman Numeral
*Zero if no specific Quarter Fourth Quarter IV
quarter Installing Computer Systems and Networks CN
Lowercase Letter/s
*Put a hyphen (-) in
Diagnosing and Troubleshooting Computer Systems DT
between letters to Week Week Six to Ten f-j
indicate more than a
specific week CC
Configuring Computer Systems and Networks
-
Inspect and test MN
Maintaining Computer and Network Systems
configured/repaired
Arabic Number Competency 4
computer systems
and networks

K to 12 TLE Information and Communications Technology – Computer Hardware Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 17 of 17