MultiVOIP ®

Voice/Fax over IP Gateways

The MultiVOIP® gateway provides toll-free voice and fax

communications over the Internet or Intranet. By integrating NOTE: 2, 4 and 8 port
voice and fax into your existing data network, you can realize gateways have been
substantial savings on inter-office long distance toll charges.
discontinued
The MultiVOIP analog gateways are available in 1, 2, 4 and
8 port models. All MultiVOIP
gateways connect directly
to phones, fax machines, key
systems, PSTN lines, or a PBX
to provide real-time, toll-quality
voice connections to any office on
your VOIP network.

Features
· 1, 2, 4 or 8 analog ports for communication
over an existing IP network or the Internet
· Ethernet connectivity and full IP compatibility with
existing routers and WAN infrastructure
· FXS/FXO/DID and E&M connectors on each channel for direct
analog connection to phones, key telephones, PBX extensions, PSTN lines or
PBX trunks
Benefits
· Supports H.323, SIP or SPP for sending voice over the Internet
• Toll bypass voice/fax
· Single Port Protocol (SPP) allows the use of dynamic IP addresses
communications
· PSTN fail-over automatically routes calls over the PSTN network if the IP network
• PSTN voice quality
is down
• Connects directly to phones,
· Supports H.450 supplementary services to provide for call transfer, call
fax or PBX
forwarding, call hold, call waiting and name identification
• Turnkey solution
· Emergency transfer (power-out fail-over)
· Voice compression to 5.3K bps
per call with support for multiple
algorithms, including ITU G.723 and
G.729
Branch - Los Angeles
· QoS via DiffServ or 802.1p
Router MultiVOIP
· T.38 real-time fax relay for
interoperability among other VOIP PSTN
equipment Corporate - Minneapolis
· VAD and CNG support
Internet / VPN
/ Intranet
· Configuration and management using  Frame Relay  ISDN
 T1/Frac T1  DSL/Cable
a Web browser or Windows®  Wireless  Satellite

· Built-in modem for installation and MultiVOIP Router Branch - London

maintenance on select models
PSTN
· Two-year warranty PSTN

Router MultiVOIP
 Highlights
Specifications
MultiVOIP Gateway Applications
Analog Models
The MultiVOIP gateway is specifically targeted at
businesses looking to reduce toll charges between
frequently called sites. It integrates seamlessly
into your data network and operates alongside
existing PBXs, or other phone equipment to simply
extend voice capabilities to remote locations. The
MultiVOIP gateway is designed to help you maximize
investments you’ve already made in your data and
voice network infrastructure.

Toll Bypass Long Distance Calling

For multi-location businesses, inter-office calling
typically represents 25-40% of a company’s total
long distance bill. To bypass these charges, each
office installs and configures a MultiVOIP gateway
on their network and connects it to their existing
LAN Port
phone equipment to place calls, send faxes, or make
modem connections to the other offices on the VOIP
network.
Command Port
Off-net Calling
Telecommuters or customers off the IP network can
make free long distance calls by dialing into a local
MultiVOIP gateway and placing toll-free calls to any
Protocols location on the VOIP network. You can even have a
MultiVOIP gateway at a remote site dial a local phone
number for a free person-to-person long distance
call.
Bandwidth Management
Off-premise Voice Extensions
The MultiVOIP gateway extends the reach of a
Voice Quality company’s PBX into remote office/SOHO locations
without installing another PBX. Now, anyone can
place calls to the remote office by simply dialing
an extension number. With support for H.450
Management
supplementary services, the MultiVOIP gateway
provides for call transfer, call forwarding, call hold,
call waiting and name identification. And, with the
Power low-cost, MultiVOIP MVP130-FXS single-port analog
adapter, you have the ability to inexpensively connect
a single analog phone in a SOHO location.

IP-enable Fax Machines

The MultiVOIP MVP130-FXS single-port analog
Dimensions adapter also inexpensively turns a fax machine
into an IP network capable device. With T.38 fax
compatibility it promises to keep your “legacy”
fax equipment productive for as long as you need
it. Ideal for IP-enabling fax machines in both large
enterprise networks or small branch office/SOHO
locations.
Certification Wireless Voice Extensions
To extend a PBX to a building across the street, or
to a location with difficult access, utilize a wireless or
satellite bridge to connect the two networks. Now,
you have voice and data connectivity without having
to lay cables or pay monthly charges for dedicated
lines.
Replace Expensive Tie Lines Advanced Speech Technologies
A corporation that utilizes Tie lines to connect branch The MultiVOIP gateway supports both DiffServ and
office PBXs to the corporate PBX can now use the 802.1p Quality of Service (QoS) protocols which
company’s IP-based Wide Area Network to complete set priorities for voice and fax traffic and allow for
the call. transparent delivery. The QoS protocols move time-
sensitive voice traffic across even low-bandwidth
Easy Integration WAN connections, like 56K and ISDN, with the
With the MultiVOIP gateway, you avoid the hassle priority and quality required by voice. Other features
and expense of replacing your existing routers, WAN such as adaptive echo cancellation, forward error
connections or phone system required by other VOIP correction, bad frame interpolation and dynamic jitter
solutions. The MultiVOIP gateway simply plugs into buffers, further enhance voice quality.
your Ethernet network. Neither your phone service
or network is placed at risk. Minimum requirements: Complete Support for Multiple Telephony
Ethernet network, WAN connection, IP addresses. Interfaces
For maximum investment protection, the MultiVOIP
Save Thousands of Dollars Each Month gateway two-, four- and eight-port models
The MultiVOIP gateway can save your company accommodate changing communication needs
substantial amounts in long distance charges. Even by providing a programmable FXS/FXO/DID
if your company uses one of the most inexpensive and an E&M interface for each port. This allows
calling plans, a voice over IP network can quickly the MultiVOIP gateway to connect directly to a
return your investment and begin paying you back. phone, fax machine, key phone system or PBX. It
automatically detects whether the incoming call is a
Interoperability voice or fax call. The single-port MultiVOIP gateway
The MultiVOIP gateway utilizes the H.323 and SIP supports FXS, FXO and DID interfaces.
protocols to provide complete interoperability with
other Internet telephony solutions. The inbound Bandwidth Management
IP call protocol is automatically detected and the Bandwidth is used only when someone is speaking.
voice channel is dynamically configured to match. The silence suppression/Voice Activity Detection
The outbound IP call protocol is configured with (VAD) feature is an option that frees unused call
the phone number allowing you the flexibility to call bandwidth for data traffic. This is significant, since
H.323 or SIP devices from the same port. In addition, callers are usually silent for 60 percent of the call.
Multi-Tech has developed it’s own proprietary When using silence suppression, the MultiVOIP
Single Port Protocol (SPP) to interoperate with other gateway also offers Comfort Noise Generation (CNG)
MultiVOIP gateways The advantage of using SPP is at the receiving end so the user knows the line has
that it requires only one static IP address allowing all not dropped. In addition, the MultiVOIP gateway
other IP addresses to be dynamic. It is also easier to supports voice compression standards like G.729
install behind a firewall as it only requires one open (8:1) and G.723 (10:1). These standards help minimize
port. The MultiVOIP gateway also supports T.38 real- the bandwidth required for voice. G.723, for instance,
time fax relay for interoperability among other VOIP is the maximum compression rate and requires only
equipment 5.3K bps (plus an added 7-8K bps for IP overhead).
Even at maximum compression, your VOIP solution
PSTN Fail-over will still provide toll-quality voice.
PSTN fail-over allows the MultiVOIP gateway to
automatically route calls over the PSTN network when Management
the IP network is congested or completely down. The MultiVOIP gateway is easily managed locally
This feature heightens reliability and augments QoS using a windows-based software application or
when conditions threaten to undermine voice quality. remotely by the central office with a web browser
Utilizing user definable controls, the MultiVOIP or SNMP. Multi-Tech also includes its own SNMP
gateway continually checks if the LAN/WAN is management software called MultiVOIPManager
threatened by packet loss or latency, or to see if the which provides central site configuration,
network is completely down. If it detects a problem, management and call monitoring for all MultiVOIP
the MultiVOIP gateway switches to “survivability gateways on the network. It utilizes a Windows
mode” transparently routing all calls over PSTN lines interface that makes it easy to view events like usage
connected to the MultiVOIP gateway. The MultiVOIP tracking, live use reporting, call history, and voice
gateway continues to monitor the connection and quality statistics. In addition, MultiVOIPManager
automatically switches back to the LAN/WAN once eases administration by automatically e-mailing
the conditions improve. call logs based on volume or time. The MultiVOIP
gateway four- and eight-port models also include a
modem for remote diagnostics, monitoring, control
and configuration.
 No User Training Supplementary Services Services & Warranty
The MultiVOIP gateway provides single The MultiVOIP gateway supports H.450 Multi-Tech’s comprehensive Support
Services programs offer a full array of
stage dialing by utilizing a Uniform supplementary services to provide for
options to suit your specific needs. These
Dialing Plan that is consistent with the call transfer, call forwarding, call hold, services are aimed at protecting your
E.164 (PSTN) standard numbering plan. call waiting, and name identification. investment, extending the life of your
This includes automatic appending and It also supports Q.SIG, an inter-PBX solution or product, and reducing total
stripping of digits to dialed numbers signaling protocol, for networking PBX cost of ownership. Our seasoned technical
to ensure that users will not require supplementary services in a multi- or experts, with an average tenure of more
additional training to make VOIP calls. uni-vendor environment. In addition, than 10 years, can walk you through smooth
installations, troubleshoot issues and help
In fact, placing calls with the MultiVOIP the MultiVOIP gateway supports SIP
you with configurations. Products include a
gateway is like using your existing extensions providing call forward and 2-year warranty that can be extended up to
phone system. call transfer capabilities. 5 years via Multi-Tech’s Extended Warranty
program, which offers the convenience of
Overnight Service* for optimal uptime.
Ordering Information Extended Warranty & Overnight
Product Description Region Services
MVP130-FXS 1-Port VOIP Gateway (FXS) w/US Accessory Kit US/Can To give you peace-of-mind and protect your
MVP130-FXS-EU 1-Port VOIP Gateway (FXS) w/EU Accessory Kit Europe investment, our Extended Warranty Service
Plans ensure your Multi-Tech products are
MVP130-FXS-GB/IE 1-Port VOIP Gateway (FXS) w/UK Accessory Kit GB/Ireland
covered for 1, 2, or 3 years beyond the
MVP130 1-Port VOIP Gateway (FXS/FXO/DID) w/US Accessory Kit US/Can
manufacturer’s warranty with an optional
MVP130-EU 1-Port VOIP Gateway (FXS/FXO/DID) w/EU Accessory Kit Europe Overnight Service plan*.
MVP130-GB/IE 1-Port VOIP Gateway (FXS/FXO/DID) w/UK Accessory Kit GB/Ireland
Installation Support
MVP210 2-Port VOIP Gateway (FXS/FXO/E&M/DID) w/US Accessory Kit US/Can
Multi-Tech’s Installation Support Service
MVP210-EU 2-Port VOIP Gateway (FXS/FXO/E&M/DID) w/EU Accessory Kit Europe
delivers priority service with the ability to
MVP210-GB/IE 2-Port VOIP Gateway (FXS/FXO/E&M/DID) w/UK Accessory Kit GB/Ireland work one-on-one with an experienced
MVP410 4-Port VOIP Gateway (FXS/FXO/E&M/DID) w/US Accessory Kit US/Can Multi-Tech technical support engineer, to
MVP410-EU 4-Port VOIP Gateway (FXS/FXO/E&M/DID) w/EU Accessory Kit Europe guide you through the installation process
MVP410-GB/IE 4-Port VOIP Gateway (FXS/FXO/E&M/DID) w/UK Accessory Kit GB/Ireland for our products.
MVP810 8-Port VOIP Gateway (FXS/FXO/E&M/DID) w/US Accessory Kit US/Can Technical Support Services
MVP810-EU 8-Port VOIP Gateway (FXS/FXO/E&M/DID) w/EU Accessory Kit Europe At Multi-Tech, we’re committed to
MVP810-GB/IE 8-Port VOIP Gateway (FXS/FXO/E&M/DID) w/UK Accessory Kit GB/Ireland providing you personalized attention and
MVP428 4-Port Expansion Card for MVP410 Global quality service while providing you a quick
response to your product support needs.
We have several options of support for you
to choose from.
For additional information on Support
Services as well as other service
offerings, please contact your Multi-Tech
representative or visit
www.multitech.com/support.go.
* Overnight replacement service is currently
available for U.S. customers.

World Headquarters
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, MN 55112 U.S.A.
Tel: 763-785-3500
Toll-Free: 800-328-9717
Email: [email protected]
www.multitech.com

EMEA Headquarters
Multi-Tech Systems (EMEA)
Unit 1, Thames Court
2 Richfield Avenue
Reading, Berkshire RG1 8EQ
United Kingdom
Tel: +(44) 118 959 7774
Email: [email protected]

12/17 • 86002027 • © 2017 by Multi-Tech Systems, Inc. All rights reserved.