Scribd
Upload
2K views1 page

Sample Flood Control Plan (From DPWH) - Layout1

This document provides details of a dike cross section, including dimensions and reinforcement details. The cross section shows a dike crest at an elevation of 15.73m topped with boulder fill between 125mm to 250mm in diameter. Below is a capping beam at an elevation of 10.12m that is reinforced with rebar. Further details include reinforcement sizes, spacing, lengths and estimated quantities for the steel sheet pile walls.

Uploaded by

Alfie Angelo Reyes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Sample Flood Control Plan (From DPWH) - Layout1

This document provides details of a dike cross section, including dimensions and reinforcement details. The cross section shows a dike crest at an elevation of 15.73m topped with boulder fill between 125mm to 250mm in diameter. Below is a capping beam at an elevation of 10.12m that is reinforced with rebar. Further details include reinforcement sizes, spacing, lengths and estimated quantities for the steel sheet pile walls.

Uploaded by

Alfie Angelo Reyes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DIKE CREST (ELEV.=15.

73m)
2
1

1
1

BOULDER FILL
125mm DIA. TO 250mm DIA.

2
1

TOP OF CAPPING BEAM (ELEV.=10.12m)

Ø12@250 B
1 TYPICAL CROSS SECTION DETAIL 3

12 SCALE: 1:50
4 - Ø10 B
4

6 - Ø16 B
1

Ø10@250 B
2

TYPE II, SHEET PILE(6.00L.M.) 3 CAPPING BEAM DETAIL


12 SCALE: 1:15

t REINFORCEMENT SCHEDULE & ESTIMATED QUANTITIES


height
REINFORCEMENT
CONCRETE
BAR DIMENSIONS (mm) TOTAL UNIT VOLUME
SPACING TOTAL
width width MARK
SIZE
QUANTITY SHAPE LENGTH WEIGHT
WEIGHT
3
(m )
(mm) (mm) b c HOOKS (m) (kg/m)
a (kg)

2 CROSS SECTION OF STEEL SHEET PILE B 16 6 AS SHOWN A 1000 - - - 6.00 1.579 9.474
DRAWN NOT TO SCALE 1
12
B 10 4 250 C 300 500 - 4.01 2.47
2 102 0.616
0.54
B 4 250 B 300 - 6.00 5.34
3 12 1000 102 0.890

PROPERTIES OF STEEL SHEET PILES B


4
10 4 AS SHOWN A 1000 - - - 4.00 0.616 2.46

GRAND TOTAL 19.748 0.54


BAR BENDING DIAGRAM
a
SECTION WIDTH HEIGHT THICKNESS SECTION AREA WEIGHT WEIGHT MOMENT OF INERTIA SECTION MODULUS
mm mm mm cm/m kg/m kg/m2 cm /m cm /m b b
a b
a a
A
11 400 100 10.5 61.2 48 120 8740 874 B C

You might also like