Philips Tbs461 2Xtl5-35W HFP Ac-Mlo /: Luminaire Data Sheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 48

Project 1

29.10.2018

Operator
Telephone
Fax
e-Mail

PHILIPS TBS461 2xTL5-35W HFP AC-MLO / Luminaire Data Sheet

Luminous emittance 1:

Luminaire classification according to CIE: 100 Luminous emittance 1:


CIE flux code: 67 93 98 100 58
SmartForm – the new standard for office lighting with modular recessed
luminaires. Reflecting Philips’ drive for simplicity and sustainability,
SmartForm recessed is a complete family of highly versatile modular and
semi-modular luminaires. These luminaires are available with a choice of
LED or MASTER TL5 light sources in square and rectangular versions.
Designed to fit in a wide range of ceiling types, SmartForm can fulfill the
majority of project requirements in most applications.
Energy efficiency
As well as incorporating energy-efficient light sources and electronic ballasts,
the SmartForm recessed family can be equipped with lighting controls.
These include solutions for presence detection and daylight regulation
(ActiLume) or daylight regulation only (Luxsense), thereby further reducing
energy consumption (W/m² is very low). In this way, this Green Flagship
range lowers overall cost of ownership as well as CO2 levels, making
SmartForm an environmentally friendly choice.
SmartForm recessed TBS461/471 – a real ‘light surface’
SmartForm recessed TBS461/471 ‘light surface’ luminaires are equipped
with a micro-lens optic (MLO) to create a homogeneous edge-to-edge
lighting appearance with a comfortable brightness impression. The housing
of these luminaires has a build-in height of 95 mm. The TBS471 version also
offers Dynamic Lighting.

DIALux 4.13 by DIAL GmbH Page 1


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

PHILIPS TBS411 2xTL5-13W HFP C6 / Luminaire Data Sheet

Luminous emittance 1:

Luminaire classification according to CIE: 100 Luminous emittance 1:


CIE flux code: 74 99 100 100 75
SmartForm – the new standard for office lighting with slender recessed
luminaires Reflecting Philips’ drive for simplicity and sustainability,
SmartForm recessed is a complete family of highly versatile modular and
semi-modular luminaires. These luminaires are available with a choice of
LED or MASTER TL5 light sources in very small, slender versions. Designed
to fit in a wide range of ceiling types, this complete family can fulfill the
majority of project requirements in most applications.
Energy efficiency
As well as incorporating energy-efficient light sources and electronic ballasts,
the SmartForm recessed family can be equipped with lighting controls.
These include solutions for presence detection and daylight regulation
(ActiLume) or daylight regulation only (Luxsense), thereby further reducing
energy consumption (W/m² is very low). In this way, this Green Flagship
range lowers overall cost of ownership as well as CO2 levels, making
SmartForm an environmentally friendly choice.
SmartForm recessed TBS411 – ‘light beam’ semi-modular – 600 mm module
These slender SmartForm recessed luminaires are designed for integration
in variety of linear ceiling systems: exposed and concealed T-bar, plaster
and the extended versions for bandraster ceilings.
‘Light beam’ TBS411 1-lamp
Micro-optics and covers (MLO-PC and Opal) in smallest concept, width 90
mm. Modular length 600, 900, 1200 and 1500 mm. To extend till 2400 mm.
‘Light beam’ TBS411 1-lamp with AIR
Micro-optics and covers in smallest concept with AIR function, width 100
mm. Modular length 600, 900, 1200 and 1500 mm. To extend till 2400 mm.
‘Light beam’ TBS411 2-lamps
Mini-optics, 2-lamps, width 115 mm. Modular length 600, 900, 1200 and
1500 mm. To extend till 2400 mm.

DIALux 4.13 by DIAL GmbH Page 2


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

PHILIPS TBS463 2xTL5-35W HFP AC-MLO / Luminaire Data Sheet

Luminous emittance 1:

Luminaire classification according to CIE: 100 Luminous emittance 1:


CIE flux code: 67 93 98 100 58
SmartForm – the new standard for office lighting with modular recessed
luminaires. Reflecting Philips’ drive for simplicity and sustainability,
SmartForm recessed is a complete family of highly versatile modular and
semi-modular luminaires. These luminaires are available with a choice of
LED or MASTER TL5 light sources in square and rectangular versions.
Designed to fit in a wide range of ceiling types, SmartForm can fulfill the
majority of project requirements in most applications.
Energy efficiency
As well as incorporating energy-efficient light sources and electronic ballasts,
the SmartForm recessed family can be equipped with lighting controls.
These include solutions for presence detection and daylight regulation
(ActiLume) or daylight regulation only (Luxsense), thereby further reducing
energy consumption (W/m² is very low). In this way, this Green Flagship
range lowers overall cost of ownership as well as CO2 levels, making
SmartForm an environmentally friendly choice.
SmartForm recessed TBS463/473 – a real ‘light surface’
SmartForm recessed TBS463/473 ‘light surface’ luminaires are equipped
with a micro-lens optic (MLO) to create a homogeneous edge-to-edge
lighting appearance with a comfortable brightness impression. The housing
of these luminaires has a build-in height of 95 mm. The TBS473 version also
offers Dynamic Lighting.

DIALux 4.13 by DIAL GmbH Page 3


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

PHILIPS TBS415 2xTL5-35W HFP C6 / Luminaire Data Sheet

Luminous emittance 1:

Luminaire classification according to CIE: 100 Luminous emittance 1:


CIE flux code: 74 99 100 100 72
SmartForm – the new standard for office lighting with slender recessed
luminaires Reflecting Philips’ drive for simplicity and sustainability,
SmartForm recessed is a complete family of highly versatile modular and
semi-modular luminaires. These luminaires are available with a choice of
LED or MASTER TL5 light sources in very small, slender versions. Designed
to fit in a wide range of ceiling types, this complete family can fulfill the
majority of project requirements in most applications.
Energy efficiency
As well as incorporating energy-efficient light sources and electronic ballasts,
the SmartForm recessed family can be equipped with lighting controls.
These include solutions for presence detection and daylight regulation
(ActiLume) or daylight regulation only (Luxsense), thereby further reducing
energy consumption (W/m² is very low). In this way, this Green Flagship
range lowers overall cost of ownership as well as CO2 levels, making
SmartForm an environmentally friendly choice.
SmartForm recessed TBS415 – ‘light beam’ semi-modular – 600 mm module
SmartForm recessed luminaires are designed for integration in linear ceiling
systems with a width of 148 mm (half module 300 mm) for exposed and
concealed T-bar and the extended versions for bandraster ceilings.
‘Light surface’ TBS415 1-lamp
MLO and asymmetrical optic in 1/2 modular concept, width 148 mm. Modular
length 600, 900, 1200 and 1500 mm. To extend till 2400 mm. ‘Light beam’
TBS415 1-lamp: micro-optics in 1/2 modular concept with AIR function, width
148 mm. Modular length 600, 900, 1200 and 1500 mm. To extend till 2400
mm.
'Light beam’ TBS415 2-lamps
Mini-optics, 2-lamps in 1/2 modular concept with AIR function, width 148
mm. Modular length 600, 900, 1200 and 1500 mm. To extend till 2400 mm.

DIALux 4.13 by DIAL GmbH Page 4


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

PHILIPS TCS460 H3L 2xTL5-13W HFP AC-MLO / Luminaire Data Sheet

Luminous emittance 1:

Luminaire classification according to CIE: 100 Luminous emittance 1:


CIE flux code: 71 95 99 100 74
SmartForm – top-class lighting in a fresh, appealing design We all feel and
perform better in a pleasant, comfortable working environment. Designed for
use in offices, shops and schools, the SmartForm family of surface-mounted
luminaires combines best-in-class lighting with a clean, distinctive design.
These ultra-flat luminaires are available with a choice of MASTER TL5, TL5
ECO or LED light sources in rectangular and square versions with
direct/indirect lighting combinations. They can also be used to form light-
lines and structures.
With its wide choice of very efficient and comfortable micro-optics and
covers, SmartForm surface-mounted provides the ideal solution for every
situation. Lighting controls can be added for further energy saving.

DIALux 4.13 by DIAL GmbH Page 5


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

PHILIPS TCS460 2xTL5-13W HFP C8 / Luminaire Data Sheet

Luminous emittance 1:

Luminaire classification according to CIE: 100 Luminous emittance 1:


CIE flux code: 75 99 100 100 79
SmartForm – top-class lighting in a fresh, appealing design We all feel and
perform better in a pleasant, comfortable working environment. Designed for
use in offices, shops and schools, the SmartForm family of surface-mounted
luminaires combines best-in-class lighting with a clean, distinctive design.
These ultra-flat luminaires are available with a choice of MASTER TL5, TL5
ECO or LED light sources in rectangular and square versions with
direct/indirect lighting combinations. They can also be used to form light-
lines and structures.
With its wide choice of very efficient and comfortable micro-optics and
covers, SmartForm surface-mounted provides the ideal solution for every
situation. Lighting controls can be added for further energy saving.

DIALux 4.13 by DIAL GmbH Page 6


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

PHILIPS FBS261 1xPL-C/4P18W HFP C / Luminaire Data Sheet

Luminous emittance 1:

Luminaire classification according to CIE: 100 Luminous emittance 1:


CIE flux code: 73 98 100 100 61
Fugato – performance in a new light. The Fugato range of fixed downlights
for general lighting consists of Fugato Compact (cut-out 175 mm), Fugato
Performance (cut-out 225 mm), Fugato Power (cut-out 275 mm) and Fugato
Full Metal (both 175 and 225 mm), which have all been designed for
optimum performance – both optical and thermal – with compact fluorescent
lamps.
Optical variation is provided by Fugato’s ‘dual optic’ concept. The top optic is
made of high-gloss aluminum. The lower polymer optic can be ordered in a
high-gloss, matt-satin or white finish. The high-gloss (C) version complies
with the UGR<sub>r</sub>19 norm (in accordance with EN12464-1,
L<sub>m</sub> <lt/> 1000 cd/m<sup>2</sup> at ? <gt/> 65º) when used
with the innovative round louver. A wide range of accessories is available for
the CFL versions of both Fugato and Fugato Full Metal.

DIALux 4.13 by DIAL GmbH Page 7


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

PHILIPS TBS412 2xTL5-35W HFP C6 / Luminaire Data Sheet

Luminous emittance 1:

Luminaire classification according to CIE: 100 Luminous emittance 1:


CIE flux code: 74 99 100 100 72
SmartForm – the new standard for office lighting with slender recessed
luminaires. Reflecting Philips’ drive for simplicity and sustainability,
SmartForm recessed is a complete family of highly versatile modular and
semi-modular luminaires. These luminaires are available with a choice of
LED or MASTER TL5 light sources in very small, slender versions. Designed
to fit in a wide range of ceiling types, this complete family can fulfill the
majority of project requirements in most applications.
Energy efficiency
As well as incorporating energy-efficient light sources and electronic ballasts,
the SmartForm recessed family can be equipped with lighting controls.
These include solutions for presence detection and daylight regulation
(ActiLume) or daylight regulation only (Luxsense), thereby further reducing
energy consumption (W/m² is very low). In this way, this Green Flagship
range lowers overall cost of ownership as well as CO2 levels, making
SmartForm an environmentally friendly choice.
SmartForm recessed TBS412 – ‘light beam’ semi-modular – 625 mm module
These slender SmartForm recessed luminaires are designed for integration
in variety of linear ceiling systems: exposed and concealed T-bar and the
extended versions for bandraster ceilings.
‘Light beam’ TBS412 1-lamp
Micro-optics and covers (MLO-PC and Opal) in smallest concept, width 90
mm. Modular length 625, 938, 1250 and 1563 mm. To extend till 2400 mm.
‘Light beam’ TBS412 2-lamps
Mini-optics, 2-lamps, width 115 mm. Modular length 625, 938, 1250 and
1563 mm. To extend till 2400 mm.

DIALux 4.13 by DIAL GmbH Page 8


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

PHILIPS FBS270 1xPL-C/2P18W C +GBS271 RL / Luminaire Data Sheet

Luminous emittance 1:

Luminaire classification according to CIE: 100 Luminous emittance 1:


CIE flux code: 90 100 100 100 34
Fugato – performance in a new light. The Fugato range of fixed downlights
for general lighting consists of Fugato Compact (cut-out 175 mm), Fugato
Performance (cut-out 225 mm), Fugato Power (cut-out 275 mm) and Fugato
Full Metal (both 175 and 225 mm), which have all been designed for
optimum performance – both optical and thermal – with compact fluorescent
lamps.
Optical variation is provided by Fugato’s ‘dual optic’ concept. The top optic is
made of high-gloss aluminum. The lower polymer optic can be ordered in a
high-gloss, matt-satin or white finish. The high-gloss (C) version complies
with the UGR<sub>r</sub>19 norm (in accordance with EN12464-1,
L<sub>m</sub> <lt/> 1000 cd/m<sup>2</sup> at ? <gt/> 65º) when used
with the innovative round louver. A wide range of accessories is available for
the CFL versions of both Fugato and Fugato Full Metal.

DIALux 4.13 by DIAL GmbH Page 9


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang tunggu pendaftaran / Summary

Height of Room: 3.000 m, Mounting Height: 3.000 m, Maintenance factor: Values in Lux, Scale 1:84
0.67

Surface  [%] Eav [lx] Emin [lx] Emax [lx] u0


Workplane / 34 13 52 0.380
Floor 20 31 14 40 0.457
Ceiling 70 5.66 3.86 6.47 0.682
Walls (4) 50 9.57 3.71 18 /

Workplane: UGR Lengthways- Across to luminaire axis


Height: 0.750 m Left Wall / /
Grid: 128 x 64 Points Lower Wall / /
Boundary Zone: 0.000 m (CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.255, Ceiling / Working Plane: 0.165.
Luminaire Parts List

No. Pieces Designation (Correction Factor)  (Luminaire) [lm]  (Lamps) [lm] P [W]
PHILIPS FBS270 1xPL-C/2P18W C
1 8 294 864 18.0
+GBS271 RL (Type 1)* (1.000)
*Modified Technical Specifications Total: 2350 Total: 6912 144.0

Specific connected load: 3.16 W/m² = 9.20 W/m²/100 lx (Ground area: 45.63 m²)

DIALux 4.13 by DIAL GmbH Page 10


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang tunggu pendaftaran / Luminaire parts list

8 Pieces PHILIPS FBS270 1xPL-C/2P18W C +GBS271


RL (Type 1)
Article No.:
Luminous flux (Luminaire): 294 lm
Luminous flux (Lamps): 864 lm
Luminaire Wattage: 18.0 W
Luminaire classification according to CIE: 100
CIE flux code: 90 100 100 100 34
Fitting: 1 x User defined (Correction Factor
1.000).

DIALux 4.13 by DIAL GmbH Page 11


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang tunggu pendaftaran / Photometric Results

Total Luminous Flux: 2350 lm


Total Load: 144.0 W
Maintenance factor: 0.67
Boundary Zone: 0.000 m

Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 29 4.91 34 / /
Floor 26 5.26 31 20 2.00
Ceiling 0.00 5.66 5.66 70 1.26
Wall 1 4.42 5.43 9.85 50 1.57
Wall 2 3.51 5.22 8.72 50 1.39
Wall 3 4.42 5.42 9.84 50 1.57
Wall 4 3.51 5.24 8.74 50 1.39

Uniformity on the working plane UGR Lengthways- Across to luminaire axis


u0: 0.380 (1:3) Left Wall / /
Emin / Emax: 0.250 (1:4) Lower Wall / /
(CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.255, Ceiling / Working Plane: 0.165.

Specific connected load: 3.16 W/m² = 9.20 W/m²/100 lx (Ground area: 45.63 m²)

DIALux 4.13 by DIAL GmbH Page 12


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang baur STNK / Summary

Height of Room: 3.000 m, Mounting Height: 3.000 m, Maintenance factor: Values in Lux, Scale 1:56
0.67
Surface  [%] Eav [lx] Emin [lx] Emax [lx] u0
Workplane / 17 1.99 60 0.116
Floor 20 15 4.52 35 0.294
Ceiling 70 2.02 1.64 2.35 0.812
Walls (4) 50 2.99 1.47 7.15 /

Workplane: UGR Lengthways- Across to luminaire axis


Height: 0.750 m Left Wall / /
Grid: 64 x 64 Points Lower Wall / /
Boundary Zone: 0.000 m (CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.134, Ceiling / Working Plane: 0.118.
Luminaire Parts List

No. Pieces Designation (Correction Factor)  (Luminaire) [lm]  (Lamps) [lm] P [W]
PHILIPS FBS270 1xPL-C/2P18W C
1 1 408 1200 36.0
+GBS271 RL (Type 1)* (1.000)
*Modified Technical Specifications Total: 408 Total: 1200 36.0

Specific connected load: 2.15 W/m² = 12.53 W/m²/100 lx (Ground area: 16.77 m²)

DIALux 4.13 by DIAL GmbH Page 13


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang baur STNK / Luminaire parts list

1 Pieces PHILIPS FBS270 1xPL-C/2P18W C +GBS271


RL (Type 1)
Article No.:
Luminous flux (Luminaire): 408 lm
Luminous flux (Lamps): 1200 lm
Luminaire Wattage: 36.0 W
Luminaire classification according to CIE: 100
CIE flux code: 90 100 100 100 34
Fitting: 1 x User defined (Correction Factor
1.000).

DIALux 4.13 by DIAL GmbH Page 14


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang baur STNK / Photometric Results

Total Luminous Flux: 408 lm


Total Load: 36.0 W
Maintenance factor: 0.67
Boundary Zone: 0.000 m

Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 16 1.51 17 / /
Floor 13 1.88 15 20 0.98
Ceiling 0.00 2.02 2.02 70 0.45
Wall 1 0.99 1.97 2.96 50 0.47
Wall 2 1.04 1.98 3.02 50 0.48
Wall 3 0.99 1.96 2.95 50 0.47
Wall 4 1.04 1.98 3.02 50 0.48

Uniformity on the working plane UGR Lengthways- Across to luminaire axis


u0: 0.116 (1:9) Left Wall / /
Emin / Emax: 0.033 (1:30) Lower Wall / /
(CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.134, Ceiling / Working Plane: 0.118.

Specific connected load: 2.15 W/m² = 12.53 W/m²/100 lx (Ground area: 16.77 m²)

DIALux 4.13 by DIAL GmbH Page 15


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang lobby / Summary

Height of Room: 3.000 m, Mounting Height: 3.090 m, Maintenance factor: Values in Lux, Scale 1:415
0.67
Surface  [%] Eav [lx] Emin [lx] Emax [lx] u0
Workplane / 10 0.96 35 0.094
Floor 20 10.00 1.10 27 0.110
Ceiling 70 2.01 1.10 2.92 0.549
Walls (4) 50 2.90 1.03 16 /

Workplane:
Height: 0.750 m
Grid: 128 x 128 Points
Boundary Zone: 0.000 m
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.278, Ceiling / Working Plane: 0.199.

Luminaire Parts List

No. Pieces Designation (Correction Factor)  (Luminaire) [lm]  (Lamps) [lm] P [W]
PHILIPS TBS412 2xTL5-35W HFP C6 (Type
1 45 338 470 10.0
1)* (1.000)
*Modified Technical Specifications Total: 15228 Total: 21150 450.0

Specific connected load: 0.39 W/m² = 3.85 W/m²/100 lx (Ground area: 1148.40 m²)

DIALux 4.13 by DIAL GmbH Page 16


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang lobby / Luminaire parts list

45 Pieces PHILIPS TBS412 2xTL5-35W HFP C6 (Type 1)


Article No.:
Luminous flux (Luminaire): 338 lm
Luminous flux (Lamps): 470 lm
Luminaire Wattage: 10.0 W
Luminaire classification according to CIE: 100
CIE flux code: 74 99 100 100 72
Fitting: 1 x User defined (Correction Factor
1.000).

DIALux 4.13 by DIAL GmbH Page 17


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang lobby / Photometric Results

Total Luminous Flux: 15228 lm


Total Load: 450.0 W
Maintenance factor: 0.67
Boundary Zone: 0.000 m

Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 8.61 1.58 10 / /
Floor 8.40 1.59 10.00 20 0.64
Ceiling 0.00 2.01 2.01 70 0.45
Wall 1 1.72 1.67 3.39 50 0.54
Wall 2 0.01 1.53 1.54 50 0.25
Wall 3 1.72 1.66 3.38 50 0.54
Wall 4 0.01 1.45 1.46 50 0.23

Uniformity on the working plane


u0: 0.094 (1:11)
Emin / Emax: 0.028 (1:36)

Illuminance Quotient (according to LG7): Walls / Working Plane: 0.278, Ceiling / Working Plane: 0.199.
Specific connected load: 0.39 W/m² = 3.85 W/m²/100 lx (Ground area: 1148.40 m²)

DIALux 4.13 by DIAL GmbH Page 18


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

loket pembayaran / Summary

Height of Room: 3.100 m, Maintenance factor: 0.67 Values in Lux, Scale 1:151
Surface  [%] Eav [lx] Emin [lx] Emax [lx] u0
Workplane / 32 4.09 106 0.128
Floor 20 29 7.56 71 0.261
Ceiling 70 5.10 2.57 7.81 0.504
Walls (4) 50 10 2.74 44 /

Workplane:
Height: 0.750 m
Grid: 128 x 64 Points
Boundary Zone: 0.000 m
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.310, Ceiling / Working Plane: 0.160.

Luminaire Parts List

No. Pieces Designation (Correction Factor)  (Luminaire) [lm]  (Lamps) [lm] P [W]
PHILIPS TBS412 2xTL5-35W HFP C6 (Type
1 6 622 864 18.0
1)* (1.000)
PHILIPS TBS412 2xTL5-35W HFP C6 (Type
2 1 622 864 10.0
2)* (1.000)
*Modified Technical Specifications Total: 4355 Total: 6048 118.0

Specific connected load: 1.40 W/m² = 4.40 W/m²/100 lx (Ground area: 84.00 m²)

DIALux 4.13 by DIAL GmbH Page 19


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

loket pembayaran / Luminaire parts list

6 Pieces PHILIPS TBS412 2xTL5-35W HFP C6 (Type 1)


Article No.:
Luminous flux (Luminaire): 622 lm
Luminous flux (Lamps): 864 lm
Luminaire Wattage: 18.0 W
Luminaire classification according to CIE: 100
CIE flux code: 74 99 100 100 72
Fitting: 1 x User defined (Correction Factor
1.000).

1 Pieces PHILIPS TBS412 2xTL5-35W HFP C6 (Type 2)


Article No.:
Luminous flux (Luminaire): 622 lm
Luminous flux (Lamps): 864 lm
Luminaire Wattage: 10.0 W
Luminaire classification according to CIE: 100
CIE flux code: 74 99 100 100 72
Fitting: 1 x User defined (Correction Factor
1.000).

DIALux 4.13 by DIAL GmbH Page 20


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

loket pembayaran / Photometric Results

Total Luminous Flux: 4355 lm


Total Load: 118.0 W
Maintenance factor: 0.67
Boundary Zone: 0.000 m

Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 28 4.43 32 / /
Floor 24 4.82 29 20 1.84
Ceiling 0.00 5.10 5.10 70 1.14
Wall 1 6.58 4.86 11 50 1.82
Wall 2 1.15 3.76 4.92 50 0.78
Wall 3 6.58 4.85 11 50 1.82
Wall 4 1.15 3.76 4.91 50 0.78

Uniformity on the working plane


u0: 0.128 (1:8)
Emin / Emax: 0.039 (1:26)

Illuminance Quotient (according to LG7): Walls / Working Plane: 0.310, Ceiling / Working Plane: 0.160.
Specific connected load: 1.40 W/m² = 4.40 W/m²/100 lx (Ground area: 84.00 m²)

DIALux 4.13 by DIAL GmbH Page 21


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang admin 1 / Summary

Height of Room: 3.000 m, Mounting Height: 3.000 m, Maintenance factor: Values in Lux, Scale 1:206
0.67

Surface  [%] Eav [lx] Emin [lx] Emax [lx] u0


Workplane / 31 3.16 89 0.102
Floor 20 30 4.96 64 0.168
Ceiling 70 5.38 2.79 7.43 0.518
Walls (4) 50 8.61 2.96 52 /

Workplane: UGR Lengthways- Across to luminaire axis


Height: 0.750 m Left Wall 15 15
Grid: 128 x 128 Points Lower Wall 15 15
Boundary Zone: 0.000 m (CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.269, Ceiling / Working Plane: 0.174.

Luminaire Parts List

No. Pieces Designation (Correction Factor)  (Luminaire) [lm]  (Lamps) [lm] P [W]
PHILIPS FBS261 1xPL-C/4P18W HFP C
1 8 732 1200 18.0
(1.000)
Total: 5856 Total: 9600 144.0

Specific connected load: 1.11 W/m² = 3.58 W/m²/100 lx (Ground area: 129.60 m²)

DIALux 4.13 by DIAL GmbH Page 22


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang admin 1 / Luminaire parts list

8 Pieces PHILIPS FBS261 1xPL-C/4P18W HFP C


Article No.:
Luminous flux (Luminaire): 732 lm
Luminous flux (Lamps): 1200 lm
Luminaire Wattage: 18.0 W
Luminaire classification according to CIE: 100
CIE flux code: 73 98 100 100 61
Fitting: 1 x PL-C/4P18W/840 (Correction Factor
1.000).

DIALux 4.13 by DIAL GmbH Page 23


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang admin 1 / Photometric Results

Total Luminous Flux: 5856 lm


Total Load: 144.0 W
Maintenance factor: 0.67
Boundary Zone: 0.000 m

Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 27 4.04 31 / /
Floor 25 4.16 30 20 1.88
Ceiling 0.00 5.38 5.38 70 1.20
Wall 1 0.83 4.01 4.83 50 0.77
Wall 2 6.05 4.45 11 50 1.67
Wall 3 0.83 4.01 4.84 50 0.77
Wall 4 6.05 4.48 11 50 1.68

Uniformity on the working plane UGR Lengthways- Across to luminaire axis


u0: 0.102 (1:10) Left Wall 15 15
Emin / Emax: 0.036 (1:28) Lower Wall 15 15
(CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.269, Ceiling / Working Plane: 0.174.

Specific connected load: 1.11 W/m² = 3.58 W/m²/100 lx (Ground area: 129.60 m²)

DIALux 4.13 by DIAL GmbH Page 24


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang server jaringan / Summary

Height of Room: 3.100 m, Mounting Height: 3.100 m, Maintenance factor: Values in Lux, Scale 1:58
0.67
Surface  [%] Eav [lx] Emin [lx] Emax [lx] u0
Workplane / 39 2.48 128 0.064
Floor 20 34 5.58 76 0.162
Ceiling 70 4.80 2.74 6.68 0.571
Walls (4) 50 7.73 2.67 38 /

Workplane: UGR Lengthways- Across to luminaire axis


Height: 0.750 m Left Wall <10 12
Grid: 128 x 64 Points Lower Wall <10 12
Boundary Zone: 0.000 m (CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.150, Ceiling / Working Plane: 0.124.
Luminaire Parts List

No. Pieces Designation (Correction Factor)  (Luminaire) [lm]  (Lamps) [lm] P [W]
PHILIPS TCS460 2xTL5-13W HFP C8 (Type
1 1 1817 2300 10.0
1)* (1.000)
*Modified Technical Specifications Total: 1817 Total: 2300 10.0

Specific connected load: 0.31 W/m² = 0.81 W/m²/100 lx (Ground area: 32.00 m²)

DIALux 4.13 by DIAL GmbH Page 25


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang server jaringan / Luminaire parts list

1 Pieces PHILIPS TCS460 2xTL5-13W HFP C8 (Type 1)


Article No.:
Luminous flux (Luminaire): 1817 lm
Luminous flux (Lamps): 2300 lm
Luminaire Wattage: 10.0 W
Luminaire classification according to CIE: 100
CIE flux code: 75 99 100 100 79
Fitting: 1 x User defined (Correction Factor
1.000).

DIALux 4.13 by DIAL GmbH Page 26


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang server jaringan / Photometric Results

Total Luminous Flux: 1817 lm


Total Load: 10.0 W
Maintenance factor: 0.67
Boundary Zone: 0.000 m

Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 35 3.34 39 / /
Floor 30 4.32 34 20 2.19
Ceiling 0.00 4.80 4.80 70 1.07
Wall 1 4.87 4.52 9.39 50 1.49
Wall 2 0.68 3.73 4.41 50 0.70
Wall 3 4.87 4.52 9.39 50 1.49
Wall 4 0.68 3.73 4.41 50 0.70

Uniformity on the working plane UGR Lengthways- Across to luminaire axis


u0: 0.064 (1:16) Left Wall <10 12
Emin / Emax: 0.019 (1:52) Lower Wall <10 12
(CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.150, Ceiling / Working Plane: 0.124.

Specific connected load: 0.31 W/m² = 0.81 W/m²/100 lx (Ground area: 32.00 m²)

DIALux 4.13 by DIAL GmbH Page 27


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

R. Arsip / Summary

Height of Room: 3.100 m, Mounting Height: 3.100 m, Maintenance factor: Values in Lux, Scale 1:131
0.67
Surface  [%] Eav [lx] Emin [lx] Emax [lx] u0
Workplane / 92 17 206 0.182
Floor 20 83 28 137 0.341
Ceiling 70 15 8.62 19 0.577
Walls (4) 50 30 8.91 135 /

Workplane: UGR Lengthways- Across to luminaire axis


Height: 0.750 m Left Wall <10 12
Grid: 128 x 64 Points Lower Wall <10 12
Boundary Zone: 0.000 m (CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.317, Ceiling / Working Plane: 0.163.
Luminaire Parts List

No. Pieces Designation (Correction Factor)  (Luminaire) [lm]  (Lamps) [lm] P [W]
PHILIPS TCS460 2xTL5-13W HFP C8
1 6 1817 2300 31.0
(1.000)
Total: 10902 Total: 13800 186.0

Specific connected load: 2.54 W/m² = 2.76 W/m²/100 lx (Ground area: 73.20 m²)

DIALux 4.13 by DIAL GmbH Page 28


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

R. Arsip / Luminaire parts list

6 Pieces PHILIPS TCS460 2xTL5-13W HFP C8


Article No.:
Luminous flux (Luminaire): 1817 lm
Luminous flux (Lamps): 2300 lm
Luminaire Wattage: 31.0 W
Luminaire classification according to CIE: 100
CIE flux code: 75 99 100 100 79
Fitting: 2 x TL5-13W/840 (Correction Factor
1.000).

DIALux 4.13 by DIAL GmbH Page 29


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

R. Arsip / Photometric Results

Total Luminous Flux: 10902 lm


Total Load: 186.0 W
Maintenance factor: 0.67
Boundary Zone: 0.000 m

Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 79 13 92 / /
Floor 69 14 83 20 5.30
Ceiling 0.00 15 15 70 3.33
Wall 1 19 14 33 50 5.22
Wall 2 5.56 13 18 50 2.89
Wall 3 19 14 33 50 5.20
Wall 4 5.56 13 18 50 2.89

Uniformity on the working plane UGR Lengthways- Across to luminaire axis


u0: 0.182 (1:6) Left Wall <10 12
Emin / Emax: 0.081 (1:12) Lower Wall <10 12
(CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.317, Ceiling / Working Plane: 0.163.

Specific connected load: 2.54 W/m² = 2.76 W/m²/100 lx (Ground area: 73.20 m²)

DIALux 4.13 by DIAL GmbH Page 30


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

loket balik nama / Summary

Height of Room: 3.100 m, Mounting Height: 3.100 m, Maintenance factor: Values in Lux, Scale 1:110
0.67
Surface  [%] Eav [lx] Emin [lx] Emax [lx] u0
Workplane / 26 3.29 63 0.125
Floor 20 24 6.88 43 0.282
Ceiling 70 3.77 2.35 4.63 0.622
Walls (4) 50 6.41 2.39 21 /

Workplane: UGR Lengthways- Across to luminaire axis


Height: 0.750 m Left Wall / /
Grid: 128 x 64 Points Lower Wall / /
Boundary Zone: 0.000 m (CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.222, Ceiling / Working Plane: 0.143.

Luminaire Parts List

No. Pieces Designation (Correction Factor)  (Luminaire) [lm]  (Lamps) [lm] P [W]
PHILIPS FBS270 1xPL-C/2P18W C
1 6 408 1200 18.0
+GBS271 RL (Type 1)* (1.000)
*Modified Technical Specifications Total: 2448 Total: 7200 108.0

Specific connected load: 1.76 W/m² = 6.69 W/m²/100 lx (Ground area: 61.20 m²)

DIALux 4.13 by DIAL GmbH Page 31


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

loket balik nama / Luminaire parts list

6 Pieces PHILIPS FBS270 1xPL-C/2P18W C +GBS271


RL (Type 1)
Article No.:
Luminous flux (Luminaire): 408 lm
Luminous flux (Lamps): 1200 lm
Luminaire Wattage: 18.0 W
Luminaire classification according to CIE: 100
CIE flux code: 90 100 100 100 34
Fitting: 1 x User defined (Correction Factor
1.000).

DIALux 4.13 by DIAL GmbH Page 32


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

loket balik nama / Photometric Results

Total Luminous Flux: 2448 lm


Total Load: 108.0 W
Maintenance factor: 0.67
Boundary Zone: 0.000 m

Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 23 2.91 26 / /
Floor 21 3.19 24 20 1.55
Ceiling 0.00 3.77 3.77 70 0.84
Wall 1 3.52 3.49 7.01 50 1.12
Wall 2 0.92 3.19 4.10 50 0.65
Wall 3 3.52 3.49 7.01 50 1.12
Wall 4 0.91 3.19 4.10 50 0.65

Uniformity on the working plane UGR Lengthways- Across to luminaire axis


u0: 0.125 (1:8) Left Wall / /
Emin / Emax: 0.052 (1:19) Lower Wall / /
(CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.222, Ceiling / Working Plane: 0.143.

Specific connected load: 1.76 W/m² = 6.69 W/m²/100 lx (Ground area: 61.20 m²)

DIALux 4.13 by DIAL GmbH Page 33


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

lobby 2 / Summary

Height of Room: 2.800 m, Mounting Height: 2.800 m, Maintenance factor: Values in Lux, Scale 1:124
0.67

Surface  [%] Eav [lx] Emin [lx] Emax [lx] u0


Workplane / 150 35 277 0.233
Floor 20 140 49 209 0.349
Ceiling 70 25 15 29 0.585
Walls (4) 50 46 16 170 /

Workplane: UGR Lengthways- Across to luminaire axis


Height: 0.750 m Left Wall 13 13
Grid: 128 x 128 Points Lower Wall 13 13
Boundary Zone: 0.000 m (CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.286, Ceiling / Working Plane: 0.168.

Luminaire Parts List

No. Pieces Designation (Correction Factor)  (Luminaire) [lm]  (Lamps) [lm] P [W]
PHILIPS TCS460 H3L 2xTL5-13W HFP AC-
1 12 1702 2300 10.0
MLO (Type 1)* (1.000)
*Modified Technical Specifications Total: 20424 Total: 27600 120.0

Specific connected load: 1.30 W/m² = 0.87 W/m²/100 lx (Ground area: 92.16 m²)

DIALux 4.13 by DIAL GmbH Page 34


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

lobby 2 / Luminaire parts list

12 Pieces PHILIPS TCS460 H3L 2xTL5-13W HFP AC-MLO


(Type 1)
Article No.:
Luminous flux (Luminaire): 1702 lm
Luminous flux (Lamps): 2300 lm
Luminaire Wattage: 10.0 W
Luminaire classification according to CIE: 100
CIE flux code: 71 95 99 100 74
Fitting: 1 x User defined (Correction Factor
1.000).

DIALux 4.13 by DIAL GmbH Page 35


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

lobby 2 / Photometric Results

Total Luminous Flux: 20424 lm


Total Load: 120.0 W
Maintenance factor: 0.67
Boundary Zone: 0.000 m

Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 130 19 150 / /
Floor 120 20 140 20 8.93
Ceiling 0.00 25 25 70 5.60
Wall 1 16 22 38 50 6.11
Wall 2 32 21 53 50 8.50
Wall 3 16 22 38 50 6.10
Wall 4 32 21 53 50 8.49

Uniformity on the working plane UGR Lengthways- Across to luminaire axis


u0: 0.233 (1:4) Left Wall 13 13
Emin / Emax: 0.126 (1:8) Lower Wall 13 13
(CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.286, Ceiling / Working Plane: 0.168.

Specific connected load: 1.30 W/m² = 0.87 W/m²/100 lx (Ground area: 92.16 m²)

DIALux 4.13 by DIAL GmbH Page 36


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

kasi pendaftaran / Summary

Height of Room: 3.100 m, Mounting Height: 3.190 m, Maintenance factor: Values in Lux, Scale 1:45
0.67

Surface  [%] Eav [lx] Emin [lx] Emax [lx] u0


Workplane / 193 68 333 0.352
Floor 20 155 84 212 0.540
Ceiling 70 24 16 30 0.677
Walls (4) 50 58 16 115 /

Workplane:
Height: 0.750 m
Grid: 64 x 64 Points
Boundary Zone: 0.000 m
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.260, Ceiling / Working Plane: 0.127.

Luminaire Parts List

No. Pieces Designation (Correction Factor)  (Luminaire) [lm]  (Lamps) [lm] P [W]
PHILIPS TBS415 2xTL5-35W HFP C6 (Type
1 1 4788 6650 36.0
1)* (1.000)
*Modified Technical Specifications Total: 4788 Total: 6650 36.0

Specific connected load: 2.57 W/m² = 1.33 W/m²/100 lx (Ground area: 14.00 m²)

DIALux 4.13 by DIAL GmbH Page 37


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

kasi pendaftaran / Luminaire parts list

1 Pieces PHILIPS TBS415 2xTL5-35W HFP C6 (Type 1)


Article No.:
Luminous flux (Luminaire): 4788 lm
Luminous flux (Lamps): 6650 lm
Luminaire Wattage: 36.0 W
Luminaire classification according to CIE: 100
CIE flux code: 74 99 100 100 72
Fitting: 1 x User defined (Correction Factor
1.000).

DIALux 4.13 by DIAL GmbH Page 38


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

kasi pendaftaran / Photometric Results

Total Luminous Flux: 4788 lm


Total Load: 36.0 W
Maintenance factor: 0.67
Boundary Zone: 0.000 m

Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 167 26 193 / /
Floor 124 31 155 20 9.85
Ceiling 0.00 24 24 70 5.43
Wall 1 31 27 58 50 9.16
Wall 2 32 26 59 50 9.32
Wall 3 31 27 58 50 9.16
Wall 4 32 26 58 50 9.29

Uniformity on the working plane


u0: 0.352 (1:3)
Emin / Emax: 0.204 (1:5)

Illuminance Quotient (according to LG7): Walls / Working Plane: 0.260, Ceiling / Working Plane: 0.127.
Specific connected load: 2.57 W/m² = 1.33 W/m²/100 lx (Ground area: 14.00 m²)

DIALux 4.13 by DIAL GmbH Page 39


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang kanit regident / Summary

Height of Room: 3.100 m, Mounting Height: 3.195 m, Maintenance factor: Values in Lux, Scale 1:45
0.67

Surface  [%] Eav [lx] Emin [lx] Emax [lx] u0


Workplane / 144 54 243 0.376
Floor 20 114 65 156 0.571
Ceiling 70 21 12 26 0.588
Walls (4) 50 51 15 98 /

Workplane:
Height: 0.750 m
Grid: 64 x 64 Points
Boundary Zone: 0.000 m
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.330, Ceiling / Working Plane: 0.146.

Luminaire Parts List

No. Pieces Designation (Correction Factor)  (Luminaire) [lm]  (Lamps) [lm] P [W]
PHILIPS TBS463 2xTL5-35W HFP AC-MLO
1 1 3857 6650 36.0
(Type 1)* (1.000)
*Modified Technical Specifications Total: 3857 Total: 6650 36.0

Specific connected load: 2.57 W/m² = 1.79 W/m²/100 lx (Ground area: 14.00 m²)

DIALux 4.13 by DIAL GmbH Page 40


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang kanit regident / Luminaire parts list

1 Pieces PHILIPS TBS463 2xTL5-35W HFP AC-MLO


(Type 1)
Article No.:
Luminous flux (Luminaire): 3857 lm
Luminous flux (Lamps): 6650 lm
Luminaire Wattage: 36.0 W
Luminaire classification according to CIE: 100
CIE flux code: 67 93 98 100 58
Fitting: 1 x User defined (Correction Factor
1.000).

DIALux 4.13 by DIAL GmbH Page 41


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang kanit regident / Photometric Results

Total Luminous Flux: 3857 lm


Total Load: 36.0 W
Maintenance factor: 0.67
Boundary Zone: 0.000 m

Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 121 23 144 / /
Floor 89 26 114 20 7.29
Ceiling 0.01 21 21 70 4.68
Wall 1 30 22 52 50 8.27
Wall 2 28 22 50 50 7.97
Wall 3 30 22 52 50 8.27
Wall 4 28 22 50 50 7.95

Uniformity on the working plane


u0: 0.376 (1:3)
Emin / Emax: 0.223 (1:4)

Illuminance Quotient (according to LG7): Walls / Working Plane: 0.330, Ceiling / Working Plane: 0.146.
Specific connected load: 2.57 W/m² = 1.79 W/m²/100 lx (Ground area: 14.00 m²)

DIALux 4.13 by DIAL GmbH Page 42


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang kesehatan / Summary

Height of Room: 3.100 m, Mounting Height: 3.190 m, Maintenance factor: Values in Lux, Scale 1:49
0.67

Surface  [%] Eav [lx] Emin [lx] Emax [lx] u0


Workplane / 72 24 127 0.334
Floor 20 57 31 79 0.550
Ceiling 70 9.05 6.03 11 0.666
Walls (4) 50 21 5.95 45 /

Workplane: UGR Lengthways- Across to luminaire axis


Height: 0.750 m Left Wall 10 13
Grid: 64 x 64 Points Lower Wall 10 13
Boundary Zone: 0.000 m (CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.254, Ceiling / Working Plane: 0.127.

Luminaire Parts List

No. Pieces Designation (Correction Factor)  (Luminaire) [lm]  (Lamps) [lm] P [W]
PHILIPS TBS411 2xTL5-13W HFP C6 (Type
1 1 1725 2300 10.0
1)* (1.000)
*Modified Technical Specifications Total: 1725 Total: 2300 10.0

Specific connected load: 0.73 W/m² = 1.02 W/m²/100 lx (Ground area: 13.68 m²)

DIALux 4.13 by DIAL GmbH Page 43


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang kesehatan / Luminaire parts list

1 Pieces PHILIPS TBS411 2xTL5-13W HFP C6 (Type 1)


Article No.:
Luminous flux (Luminaire): 1725 lm
Luminous flux (Lamps): 2300 lm
Luminaire Wattage: 10.0 W
Luminaire classification according to CIE: 100
CIE flux code: 74 99 100 100 75
Fitting: 1 x User defined (Correction Factor
1.000).

DIALux 4.13 by DIAL GmbH Page 44


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang kesehatan / Photometric Results

Total Luminous Flux: 1725 lm


Total Load: 10.0 W
Maintenance factor: 0.67
Boundary Zone: 0.000 m

Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 62 9.40 72 / /
Floor 46 11 57 20 3.64
Ceiling 0.00 9.05 9.05 70 2.02
Wall 1 12 9.67 22 50 3.44
Wall 2 11 9.75 21 50 3.32
Wall 3 12 9.60 22 50 3.43
Wall 4 11 9.74 21 50 3.32

Uniformity on the working plane UGR Lengthways- Across to luminaire axis


u0: 0.334 (1:3) Left Wall 10 13
Emin / Emax: 0.188 (1:5) Lower Wall 10 13
(CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.254, Ceiling / Working Plane: 0.127.

Specific connected load: 0.73 W/m² = 1.02 W/m²/100 lx (Ground area: 13.68 m²)

DIALux 4.13 by DIAL GmbH Page 45


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang drive THRU / Summary

Height of Room: 3.100 m, Mounting Height: 3.100 m, Maintenance factor: Values in Lux, Scale 1:56
0.67

Surface  [%] Eav [lx] Emin [lx] Emax [lx] u0


Workplane / 105 24 233 0.226
Floor 20 89 36 145 0.402
Ceiling 70 15 9.38 19 0.621
Walls (4) 50 31 10 67 /

Workplane: UGR Lengthways- Across to luminaire axis


Height: 0.750 m Left Wall 12 12
Grid: 64 x 64 Points Lower Wall 11 11
Boundary Zone: 0.000 m (CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.254, Ceiling / Working Plane: 0.143.

Luminaire Parts List

No. Pieces Designation (Correction Factor)  (Luminaire) [lm]  (Lamps) [lm] P [W]
PHILIPS TBS461 2xTL5-35W HFP AC-MLO
1 1 3857 6650 36.0
(Type 1)* (1.000)
*Modified Technical Specifications Total: 3857 Total: 6650 36.0

Specific connected load: 1.63 W/m² = 1.55 W/m²/100 lx (Ground area: 22.03 m²)

DIALux 4.13 by DIAL GmbH Page 46


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang drive THRU / Luminaire parts list

1 Pieces PHILIPS TBS461 2xTL5-35W HFP AC-MLO


(Type 1)
Article No.:
Luminous flux (Luminaire): 3857 lm
Luminous flux (Lamps): 6650 lm
Luminaire Wattage: 36.0 W
Luminaire classification according to CIE: 100
CIE flux code: 67 93 98 100 58
Fitting: 1 x User defined (Correction Factor
1.000).

DIALux 4.13 by DIAL GmbH Page 47


Project 1
29.10.2018

Operator
Telephone
Fax
e-Mail

ruang drive THRU / Photometric Results

Total Luminous Flux: 3857 lm


Total Load: 36.0 W
Maintenance factor: 0.67
Boundary Zone: 0.000 m

Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 92 13 105 / /
Floor 74 16 89 20 5.68
Ceiling 0.01 15 15 70 3.36
Wall 1 18 14 32 50 5.13
Wall 2 15 14 29 50 4.66
Wall 3 18 14 32 50 5.12
Wall 4 15 14 29 50 4.65

Uniformity on the working plane UGR Lengthways- Across to luminaire axis


u0: 0.226 (1:4) Left Wall 12 12
Emin / Emax: 0.102 (1:10) Lower Wall 11 11
(CIE, SHR = 1.00.)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.254, Ceiling / Working Plane: 0.143.

Specific connected load: 1.63 W/m² = 1.55 W/m²/100 lx (Ground area: 22.03 m²)

DIALux 4.13 by DIAL GmbH Page 48

You might also like