Scribd Logo
Upload

Welcome to Scribd!

  • 50 views

    BITBUS Controller M-Module

    Uploaded by

    RENZHI LI
    The M304 BITBUS Controller M-module features an Intel i8044 microprocessor that provides functions to implement BITBUS master or slave nodes. It includes firmware with extensive remote access and control commands to perform functions on remote nodes. The BITBUS allows up to 250 nodes to be interconnected over distributed distances ranging from 30 to thousands of meters for a wide range of applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    BITBUS Controller M-Module

    Uploaded by

    RENZHI LI
    50 views2 pages
    The M304 BITBUS Controller M-module features an Intel i8044 microprocessor that provides functions to implement BITBUS master or slave nodes. It includes firmware with extensive remote access and control commands to perform functions on remote nodes. The BITBUS allows up to 250 nodes to be interconnected over distributed distances ranging from 30 to thousands of meters for a wide range of applications.

    Original Description:

    BITBUS Controller M-module

    Original Title

    BITBUS Controller M-module

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The M304 BITBUS Controller M-module features an Intel i8044 microprocessor that provides functions to implement BITBUS master or slave nodes. It includes firmware with extensive remote access and control commands to perform functions on remote nodes. The BITBUS allows up to 250 nodes to be interconnected over distributed distances ranging from 30 to thousands of meters for a wide range of applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    50 views2 pages

    BITBUS Controller M-Module

    Uploaded by

    RENZHI LI
    The M304 BITBUS Controller M-module features an Intel i8044 microprocessor that provides functions to implement BITBUS master or slave nodes. It includes firmware with extensive remote access and control commands to perform functions on remote nodes. The BITBUS allows up to 250 nodes to be interconnected over distributed distances ranging from 30 to thousands of meters for a wide range of applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    M304 BITBUS Controller M-module

    By AcQ Inducom

    The M304 BITBUS Controller M-module, featuring the i8044 BITBUS enhanced
    microprocessor provides all necessary functions to implement a BITBUS master or slave node.
    The resident firmware includes an extensive Remote Access and Control (RAC) command set,
    to allow specific functions to be performed on the remote nodes.
    The BITBUS allows up to 250 nodes to be easily interconnected over a physically distributed
    domain. Distribution capability ranges from 30 to thousands of meters.
    The different modes of operation are optimized for a wide range of applications covering the
    spectrum from high speed servo motor control in robotics, to long distance environmental
    control.

    Features:
    > Intel i8044 BEM (Bitbus Enhanced Microprocessor)
    > Command and status registers mapped
    > Synchronous BITBUS interconnect at 3 bitrates of up to 2.4 Mbps
    > Optical isolation according to VDE884
    > Optional isolated supply (+12VDC) supplied by the network
    > 10 pole flatcable connector at module front
    > Identification EEPROM
    M-module Compliancy Controller Network Configuration
    * A08/D16 (8-bit address and 16-bit * Intel i8044 BEM ( BITBUS Enhanced * Up to 250 nodes can be easily
    data) Microprocessor) interconnected over a physically
    * INTA (software end-of-interrupt) * 256 bytes deep transmit and receive distributed domain
    * IDENT (identification EEPROM) FIFOs * RS485 transceivers
    * 10 pole flatcable connector at module
    front

    m304_v4

    Media Interfacing Ordering Information


    * Supports RS485 optical isolation * M304/T01 M-module
    according to VDE884 * M304/SW APIS bases software
    * M304/MAN manual on paper

    Visit address
    Rijnstraat 20
    5347 KN Oss

    Postal address
    P.O. Box 627
    5340 AP Oss

    The Netherlands
    Phone +31 (0)412 64 19 22
    Fax +31 (0)412 62 26 40
    Internet www.acq.nl
    Email [email protected]

    m304_v4

    You might also like