Slurry Pumps

Engineered to perfection...

4DRR Series

SLURRY
 4DRR Series : Features & Dimensions
Features Cross Sectional View
Ÿ Impeller - Abrasive resistant Semi open type
impeller with hydraulically balanced axial thrust.
Ÿ Shaft - Fully covered heavy duty shaft not
exposed to pumpage liquid.
Ÿ Motor - Highly efficient slow speed motors with
built-in protection against temperature rise.
Ÿ Wearplate - Abrasive resistant adjustable wear
plate to restore clearances for optimum
efficiency.
Ÿ Mechanical Seals - Dual mechanical seals fitted
in independent chamber devoid of discharge
pressure ensuring better seal life. Additionally
fitted with seal sensors to detect any kind of
water ingress.
Ÿ Agitator - Abrasive resistant agitator comes in as
a built-in arrangement.
Ÿ Jetting - Inbuilt provision for water jet
arrangement for desettling of slurries.
Ÿ Replaceable Wear Parts - All wear parts are
independently replaceable which brings down
running/maintenance cost drastically.

Denominations Nomenclature
Product Code 4DRR+ 4DRR05G/80+
Installation Vertical / Portable Dry Motor
Soild Handling
Impeller Characteristic Radial Volute Type
Motor HP
Discharge Connection 65/80/100/150 mm Product Code
No. of Poles

Dimensions * without cable

PUMP MODEL HP/KW RPM OUTLET/DN SIZE MIN. SUB. SOLID PASSAGE WIDTH (Approx.) HEIGHT (Approx.) NET WT. (kg)*

4DRR-05F/16+ 5.0/3.7 1450 65 740 16 445 895 150

4DRR-05G/25+ 5.0/3.7 1450 100 830 25 415 985 155
4DRR-05H/16+ 5.0/3.7 1450 80 800 16 470 950 155
4DRR-07F/16+ 7.5/5.5 1450 65 725 16 445 925 205
4DRR-07G/25+ 7.5/5.5 1450 100 825 25 415 1020 205
4DRR-07H/16+ 7.5/5.5 1450 80 780 16 465 985 205
4DRR-10F/16+ 10/7.5 1450 65 725 16 445 925 215
4DRR-10H/20+ 10/7.5 1450 80 780 20 465 985 215
4DRR-10I/25+ 10/7.5 1450 100 830 25 475 1030 230
4DRR-15H/16+ 15/11 1450 80 850 16 465 1055 290
4DRR-15I/25+ 15/11 1450 100 890 25 475 1095 300
4DRR-20J/16+ 20/15 1450 100 935 16 650 1140 370
4DRR-20M/25+ 20/15 1450 150 965 25 600 1175 370
4DRR-25J/20+ 25/18.5 1450 100 935 20 650 1145 380
4DRR-25M/25+ 25/18.5 1450 150 965 25 600 1175 380
4DRR-30J/20+ 30/22 1450 100 1020 20 650 1230 400
4DRR-30M/25+ 30/22 1450 150 1050 25 600 1260 400
4DRR-40J/20+ 40/30 1450 100 1050 20 650 1255 420
4DRR-40M/25+ 40/30 1450 150 1065 25 600 1270 420
4DRR-50J/20+ 50/37 1450 100 1170 20 650 1170 680
4DRR-50N/25+ 50/37 1450 200 1220 25 670 1610 680
4DRR-100'MM'/25+ 100/75 1450 150 1290 25 755 1705 900
4DRR-100'O'/25+ 100/75 1450 200 1430 25 800 1850 776
Note: All dimensions are in millimeter (mm).
 4DRR Series : Technical Specifications & Performance
Performance (Range)* Tech. Specifications*
(Upto 200 HP / 100M Head / 20000LPM Flow) Rating : Up to 200HP
132 RPM : 1450 (nominal)
Frequency : 50Hz
120
Supply : Three Phase - 415 V
108 Starting : DOL / STARDELTA
Motor : Dry Type / Wet type
96

84 Process Data
HEAD IN METERS

Liquid Temperature Max 40°C

72
Liquid Density 2.8 gm/cc
60
Solid Passage Up to 32 mm
48 Solid Concentration 65% by weight

36
Materials*
24
Impeller : High Chrome, Ni-Hard, Hardned SS
12 Shaft : SS

0
Casing : Ni-Ci, High Chrome, Ni-Hard
0 2400 4800 7200 9600 12000 14400 16800 19200 21600 24000 26400
Flow in LPM
Wear Plate : High Chrome, Ni-Hard
Agitator : High Chrome, Ni-Hard
0 2.40 4.80 7.20 9.60 12.00 14.40 16.80 19.20 21.60 24.00 26.40
Flow in m3/min Mech. Seal : Sic v/s Sic, Tc v/s Tc
* We offer fully customised pumps for your
specific needs and applications * Option of complete pump in special MoC is also available

Performance for Pump in DN-65mm Performance for Pump in DN-80mm Performance for Pump in DN-100mm
33 33 55

30 30 50 4DRR-5
0J/20+
50HP

27 27 45
4DRR-40
J/20+ 40H
P
24 24 4DRR 40
4DRR-10 -10H/2
F/16+ 0+ 10 4DRR-3
10HP HP
4DRR 0J/20+
-07F/1 30HP
21 6+ 7.5H 21 35
P
HEAD IN METERS

4DRR
HEAD IN METERS

4DRR -10H/2
HEAD IN METERS

-05F 0+ 10 4DRR-2
/16+ HP 30 5J/20+
18 5.0H 18 25HP
P
4D
25 RR
15 15 4D -2
4DRR-05 RR 0J
H/16+ -0 /1
5.0HP 7H 6+
/1
6+ 4DRR-1 20
12 12 7. 20 5I/25+ HP
5H 15HP
P
4DRR-10
I/25+ 10
9 15 HP
9 4DRR-0
7G/25+
7.5HP

6 6 10 4DRR-05G/25+
5.0HP

3 3 5

0 0 0 0
0 60 120 180 240 300 360 420 480 540 600 660 0 100 200 300 400 500 600 700 800 900 1000 1100 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750
Flow in LPM Flow in LPM Flow in LPM

0 0.06 0.12 0.18 0.24 0.30 0.36 0.42 0.48 0.54 0.60 0.66 0 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.0 1.1 0 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75
Flow in m3/min Flow in m3/min Flow in m3/min

Performance for Pump in DN-150mm Performance for Pump in DN-150mm Performance for Pump in DN-200mm
33 110 33
4DRR-100'O'/
25+ 100HP
30 100 30

4DRR-4 4DRR-10
27 0M/25+ 90 0MM/25+ 27
40HP 100HP
4DR
R-50
N/2
5+ 5
24 80 24 0HP
4DRR-3
0M/25+
30HP
21 4DRR-25M/2 70 21
5+ 25HP
HEAD IN METERS

HEAD IN METERS

HEAD IN METERS

18 60 18

15 50 15
4DRR-20M/25+ 20HP

12 40 12

9 30 9

6 20 6

3 10 3

0 0 0
0 400 800 1200 1600 2000 2400 2800 3200 3600 4000 4400 0 300 600 900 1200 1500 1800 2100 2400 2700 3000 3300 0 1200 2400 3600 4800 6000 7200 8400 9600 10800 12000 13200
Flow in LPM Flow in LPM Flow in LPM

0 0.40 0.80 1.20 1.60 2.00 2.40 2.80 3.20 3.60 4.00 4.40 0 0.30 0.60 0.90 1.20 1.50 1.80 2.10 2.40 2.70 3.00 3.30 0 1.20 2.40 3.60 4.80 6.00 7.20 8.40 9.60 10.80 12.00 13.20
Flow in m3/min 3
Flow in m /min 3
Flow in m /min

For pumps above 100HP please consult our application engineer.

 User Industries and Applications
Options
Ÿ We offer complete Slurry pumping
solution for all kind of slurries.
Ÿ All slurry pumps are customised
to cater specific needs of users.
Ÿ Specialised range of slurry pumps
for pumping deep sea slurries.
Ÿ Can be offered for pumping high
temp. slurries upto 90°C.
Ÿ Option of pontoon mounted slurry
pumps also available.
Ÿ Option of twin volute casing.
Steel Sector Power Sector Ÿ Customisable jetting arrangement
• Beneficiation area • Sintering Plants • Intake water supply based on weight and concetration
• RHMS • Slag slurry in Blast Furnace • Zero discharge of slurry.
• Captive Power Plants • Ash handling Ÿ Customisable pump stand for
• Wagon Tripler area - CHP • Coal handling maximum slurry pumping.
• Jetty area • Cooling Water Ponds cleaning Ÿ Pumps can be offered in 60Hz on
• Hot water in Blast Furnace • Cooling towers request.
• Coke Oven • HSM • Casters • Utilities slurry pumping
Recommendations
Ÿ Always flush the pump with clean
water after use.
Ÿ In case of maintenance always
use Genuine Spares.
Ÿ Use slurry specific slurry hoses for
effective slurry handling.
Ÿ Ensure use of proper control
panel for proper safety & running
of Slurry pumps.
Ÿ Always ensure that pump is
properly earth.

Mines Docks & Marines

• Ore extraction • Dry dock cleaning
• Pumping of mines slurry • Cleaning of Ports and Jetties
• Pumping of corrossive & abrassive • Desalination projects
liquids • River cleaning projects
• Pumping of highly concentrated • Pumping Highly contaminated
liquids marine water with muck &
• Stone processing units sediments