Owner : MC : Project : Contractor :

Title : Client Doc. No. : File Name :

DATA SHEET FOR ELECTRO-PNUEMATIC VALVE POSITIONERS Contr. Doc. No. : Sht. No. :
( E/P POSITIONER)
1  Tag Number XY‐TYPE1 17  Fail  Safe  Action AS needed
2  P & ID No. 18  Spring Range AS needed
3  Supply  Pressure 4~10 Kgr/cm2 19 Valve & Actuator   Valve Stroke Or Angle Degree AS needed
4  Input  Signal  4 ‐ 20 mA (HART) 20 Data  Valve  Characteristic AS needed
5  Electr.  Connection  M20 x 1.5 21  Actuator  Size VTS
6  Pneum. Connection  1/4"  NPT(F) 22  Actuator  Type AS needed
7  Maximum  Span  V.T.S 23  Position Switch Module  Required, Integrated Proximity Type, as an option
8  Output Signal Increase  Action AS needed 24  Feedback Position Module(4~20mA)  Required, as an option
General
9  Port  Type Single/Double Acting 25  Output  Gauge  Required, (Note 3)
10  Electrical Classification EExia IIC T4 26 Option /  Supply  Gauge  Required, (Note 3)
11  Mechanical  Protection IP 66 (As  Minimum) 27 Accessories  Air Set+Gauge+ Mounting Kit  Required, ( Note 2), (Note 3)
12  Housing  Material Stainless Steel 28  Mounting  Bracket  Required, (Material: s.s 304)
13  EMC  Approval  Required 29  Attachment Kit  Required, (Material: s.s 316)
14  Local User Interface   Required 30 Cable Gland & Shroud  Required, (Note 1)
15  Local LCD Display   Required 31 Purchasing  Model  No.   ‐
16 SIL SIL2 32 Data  Manufacturer   ‐
Technical  Data  of  Existing  Control  Valves
Positioner Action Actuator

Item Stroke
Tag No. P&ID  Valve Notes
No. Signal Supply  Spring  (mm) Fail Safe 
Manufacturer /  Mount.  Posi‐ Charac‐ Valve Type
Model No. Input Press. Port Type Port Actuator Signal Type Range Or Model Action
Model No. Position tioner teristic
Increase (Kg/cm2)  Angle
(Kg/cm2) (Kg/cm2) To  (Degree)

7
Notes : Abbrivation : Positioner Mounting Position
HT : Hitachi D.A : Direct Action S.P : Single Port L
1 - Cable Gland Shall Be Double Sealed Type ( Material : Nickle Plated Brass) . GU : Gulde R.A : Revers Action D.P : Double Port
2 - Air Set preferably Shall Be Supplied By Positioner's Manufacturer.(Body Material :Stainless Steel). TK : Toko EQ% : Equial Percentage V.T.S Vendor To Specify
3 - Gauge-Body Material Shall Be Stainless Steel . MY : Motoyama L: Linear Cylind, Cylinder
YEW : Yokogawa Diaph. : Diaphragm R

Page 14 of 25
OWNER : PROJECT : CONTRACTOR :

TITLE :
CLIENT DOC. NO.: FILE NAME :

Existing Valve Positioners

Vendor Drawing For Existing Valve Positioner

Page 15 of 25