SCM20X

ANALOG INPUT MODULE

RS485, ETHERNET, TMAX

8 CHANNELS, COMMUNICATION PORT:

EACH WITH UNIVERSAL INPUT RS485 OR ETHERNET

COST-EFFECTIVE
SIZE : 75 x 100 x 110
REMOTE I/O FOR PLCS

POWERFUL, FLEXIBLE
Tmax VERSION WITH 4~20 mA
SCADA SOFTWARE

WITH TMAX WITH ETHERNET

› 8 universal analog inputs

› 8 thermocouples, Pt100, 0~50 mV, 0/4~20 mA, digital input
› Isolated RS485/MODBUS RTU, Upto 19200 Baud rate
› MODBUS / TCP & Telnet multidrop communication for PLC, SCADA, etc.
› 85~265 VAC or 15~60 V DC supply
› 3 key, 3 level programming
› Powerful, flexible SCADA software available
› 4~20 mA output option
› Standard & High Performance Version

SCM20X
www.radix.co.in
SCM20X
ANALOG INPUT MODULE
RS485, ETHERNET, TMAX

SPECIFICATIONS All specifications at ambient of 25 °C, unless specified otherwise

INPUTS COMMUNICATION
Maximum no. of channels 8 SCM201
Input types Port RS485, isolated
Thermocouple B, E, J, K, N, R, S, T Protocol MODBUS RTU
RTD Pt100, 3-wire Baud rate 4800/9600/19200 bps
Linear input 0~50 mV, 0~20 mA, 4~20 mA Slave ID User programmable, 1~247
(each input independently scaleable Minimum polling interval 250 milliseconds
and without any DIP reconfiguration) Data types Float, swapped float, integer,
Digital input Potential free integer x10
Channel scan rate < 0.8 seconds for 8 channels SCM203
Channel-to-channel isolation Suitable for low (leakage) voltages less System
than 3V AC CPU 32 bit MCU
Input protection Communication interface
Thermocouple, mV, RTD inputs ± 10 V DC max Ethernet 10/100 base TX , RJ-45
Current inputs Current limit < 30 mA, 28 V DC max Protocol Modbus/TCP & Telnet
Range limits See Table 1 Com port format
Accuracy See Table 1 Data bit 8
ADC resolution 16 bit Parity None
Cold junction compensation Automatic Stop bit 1
Sensor break protection User programmable Baud rate 9600 bps
Slave ID User programmable, 1~247
ANALOG OUTPUT Minimum polling interval 250 milliseconds
Current 0~20 mA, 4~20 mA, 20~0 mA, 20~4 mA Data types Float, swapped float, integer,
Load for current output 0~500W integer x10
Voltage 0~2 VDC, 0~5 VDC, 0~10 VDC /
user specified INDICATION
Load for voltage output > 10 kohms Display type 2x16 character LCD display

ADJUSTMENTS OTHER
Unit User selectable Keypad Tactile, 3 keys
Resolution User selectable Memory for programmed Non-volatile, indefinite duration
0.0001,0.001,0.01, 0.1or 1 for parameters
linear input, 0.1 or 1 for temperature Supply voltage a) 85~265 V AC, 50/60 hz
b) 15~60 V DC
OTHER MA JOR PARAMETERS Power consumption 3 watts
Password
Level lock TEMPERATURE, HUMIDITY
Display scan rate 1~99 seconds/channel Ambient, storage -22~+85°C
SKIP channel Enable/disable Ambient, operation 0~50°C
Input bias -99.9 ~ 99.9 Relative humidity 0~95%
Power ON output 0.0 ~ 99.9 sec
activation delay ENCLOSURE
Material ABS plastic
CALIBRATION Dimensions (in mm) 100(W) x 75(H) x 110(D)
Zero & span Through front panel keys & display Protection IP20
User calibration Sensor span and sensor zero Mounting Snap on for 35mm DIN rail to
CJC calibration Room temperature DIN 46277

TABLE 1
RANGE LIMITS RANGE IN WHICH
SENSOR / INPUT TYPICAL ACCURACY WORST CASE
(°C / EU) ACCURACY IS SPECIFIED
AT 30 °C ACCURACY
LOW SCALE HIGH SCALE LOW SCALE HIGH SCALE (°C / EU) (°C / EU)

Pt - 6% Rh / Pt - 30% RH (B) 400 1820 400 1820 ±3 ±5

Chromel / Constantan (E) -200 1000 0 1000 ±1 ±3

Iron / Constantan (J) -210 760 0 760 ±1 ±3

Chromel / Alumel (K) -200 1372 -50 1200 ±1 ±3

Nicrosil / Nisil (N) -200 1300 -50 1200 ±1 ±3

Pt / Pt - 13% Rh (R) 0 1760 0 1760 ±2 ±5

Pt / Pt - 10% Rh (S) 0 1760 0 1760 ±2 ±5

Copper / Constantan (T) -200 400 -200 400 ±1 ±3

Pt100, 3-wire -200 850 -200 850 ± 0.5 ± 2.0

Linear (0~50 mV, 0~20 mA, 4~20 mA) -19999 19999 -19999 19999 ± 5 EU ± 20 EU

SCM20X
www.radix.co.in
SCM20X
ANALOG INPUT MODULE
RS485, ETHERNET, TMAX

APPLICATION

Thermocouple

Flow Totaliser
FLOTO

RH+T Transmitter
SC805

Pressure
Transmitter
SC504

Isolated Transmitter
SC601

SCM201/SCM203 0~10 V DC
3-Port Isolator
SCC401
Temperature
Transmitter
TX1HM

RTD

TYPICAL CONFIGURATION

SCM203-01 SCM203-02 SCM203-23

24 Port
Ethernet switch

LAN
192.168.1.1 192.168.1.2 192.168.1.23
8 Port
Ethernet switch
SCM203-24 SCM203-25 SCM203-46

LAN
192.168.1.24 192.168.1.25 192.168.1.46

Server with 21 CFR SCM203-47 SCM203-48 SCM203-69

SCADA Systems

LAN
192.168.1.47 192.168.1.48 192.168.1.69

SCM20X
www.radix.co.in
SCM20X
ANALOG INPUT MODULE
RS485, ETHERNET, TMAX

CURRENT OUTPUT MODES

There are 3 current output modes :

Mode No. Mode Name Current output 1

1 T max T max
2 TA T of assigned channel A

Mode 1 : T Max
Current output (I) corresponds to highest temperature (Tmax) from all channels.

Mode 2 : TA
I corresponds to temperature (T) of any assigned channel A.

SCADA SCREENS

SCM203

SCM203

SCM20X
www.radix.co.in
SCM20X
ANALOG INPUT MODULE
RS485, ETHERNET, TMAX

ORDERING INFORMATION

Model : SCM201

Standard Options
SCM201, standard version, will be supplied with the
following specifications :

No. of channels 8
Output RS485/MODBUS RTU

Example 2310 01 2310 01

Product code 2310
Supply voltage 01 85~265 VAC
02 15~60 VDC

Model : SCM201 Tmax

Standard Options Non-standard Options

SCM201, standard version, will be supplied with the The following ordering options are available on request.
following specifications : Minimum order quantity and/or minimum order value may apply.

Input type Universal Option Details

Output 4~20 mA for Tmax
1. Analog output 0~10 V DC
Supply 85~265 V AC

Example 2432 01 01 2432 01 01

Product code 2432
No. of channels 01 4
02 8
Supply voltage 01 85~265 VAC
02 15~60 VDC

Model : SCM203
Standard Options Non-standard Options
SCM203, standard version, will be supplied with the The following ordering options are available on request.
following specifications : Minimum order quantity and/or minimum order value may apply.

No. of channels 8 Option Details

Output ETHERNET MODBUS TCP 1. No. of channels 4
All channels with a
Example 2548 01 2548 01 2. Specify input type
given input type
Product code 2548
Supply voltage 01 85~265 VAC
02 15~60 VDC

CAT#672R0/A

ENQUIRIES
RADIX ELECTROSYSTEMS PVT LTD
Instruments: [email protected] B-14, 2nd Floor, Ghanshyam Indl Estate
Sensors: [email protected]
Veera Desai Road, Andheri (West)
Gauges: [email protected]
Mumbai - 400 053, India
Automation: [email protected]
Level: [email protected] + 91 22 42537707 l [email protected]
www.radix.co.in