Scribd
Upload
17 views6 pages

Non-Ideal Capacitors (10 Points) : Experiment

The document describes an experiment measuring the capacitance of two non-ideal capacitors at different voltages and temperatures. It includes connecting the capacitors to a voltage source, measuring the capacitance at various voltages and temperatures, calibrating a thermistor, and identifying possible sources of measurement error.

Uploaded by

vrajakisoriDasi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views6 pages

Non-Ideal Capacitors (10 Points) : Experiment

The document describes an experiment measuring the capacitance of two non-ideal capacitors at different voltages and temperatures. It includes connecting the capacitors to a voltage source, measuring the capacitance at various voltages and temperatures, calibrating a thermistor, and identifying possible sources of measurement error.

Uploaded by

vrajakisoriDasi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Experiment

A1-1
English (Official)

Non-ideal capacitors (10 points)

Part A. Capacitors at room temperature (4.0 points)

A.1 ( 2.3 pt)


Graph 𝐶1 (𝑈) and 𝐶2 (𝑈) on the millimeter paper:

Fill the table with the corresponding values:

𝑈 𝐶1 𝐶2
0𝑉
3𝑉
6𝑉

𝐶(𝑈) =

Experiment conditions:

Board ID =

𝑇room =
Experiment

A1-2
English (Official)

A.2 ( 0.5 pt)

𝑈max change =

At capacitor (check): □ C1 □ C2

A.3 ( 1.2 pt)

𝑞1 =

𝑞2 =

Part B. Calibrating NTC thermistor (1.0 point)

B.1 ( 1.0 pt)


Formula:

𝑅0 =

Value:
𝑅0 = Ω
Experiment

A1-3
English (Official)

Part C. Capacitors at different temperatures (3.0 points)

C.1 ( 1.3 pt)


Graph 𝐶1 (𝑈) and 𝐶2 (𝑈) on the millimeter paper:
Experiment

A1-4
English (Official)

C.2 ( 0.5 pt)


Graph 𝐶1 (𝑇 ) and 𝐶2 (𝑇 ) on the millimeter paper:

C.3 ( 1.2 pt)


𝐶1 ( 85◦ C)/𝐶1 ( 40◦ C)| 0 V =

𝐶1 ( 85◦ C)/𝐶1 ( 40◦ C)| 6 V =

𝐶2 ( 85◦ C)/𝐶2 ( 40◦ C)| 0 V =

𝐶2 ( 85◦ C)/𝐶2 ( 40◦ C)| 6 V =


Experiment

A1-5 English (Official)

Part D. Sources of measurement errors (2.0 points)

D.1 ( 1.0 pt)


Possible S1 positions: C1, C2
Possible IN connection: +9V, -9V, GND, Free
Initial settings:

S1 position IN connection

Process:

Step number S1 position IN connection Duration, s Measured variable

Verification:

Main source of error (check):


□ Leakage current
□ Polarization properties of the capacitor’s dielectric media
Experiment

A1-6 English (Official)

D.2 ( 1.0 pt)


Possible S1 positions: C1, C2
Possible IN connection: +9V, -9V, GND, Free
Initial settings:

S1 position IN connection

Process:

Step number S1 position IN connection Duration, s Measured variable

Verification:

Main source of error (check):


□ Leakage current
□ Polarization properties of the capacitor’s dielectric media

You might also like