Scribd
Upload
1K views4 pages

Flexbox - Born To Be Flexible: Flexbox Programming Tool For The Automotive Sector

This document provides instructions for using the FLEXBox programming tool with the FLX2.14 cable for the automotive sector. It describes how to setup the FLEXBox by plugging in the FLX2.14 cable, connecting the power supply, and interfacing with the programmer and unit. It then outlines 4 functions: 1) identifying pin locations, 2) power supply connection, 3) automatic ignition control, and 4) loop mode for switching ignition on/off.

Uploaded by

alex booty
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views4 pages

Flexbox - Born To Be Flexible: Flexbox Programming Tool For The Automotive Sector

This document provides instructions for using the FLEXBox programming tool with the FLX2.14 cable for the automotive sector. It describes how to setup the FLEXBox by plugging in the FLX2.14 cable, connecting the power supply, and interfacing with the programmer and unit. It then outlines 4 functions: 1) identifying pin locations, 2) power supply connection, 3) automatic ignition control, and 4) loop mode for switching ignition on/off.

Uploaded by

alex booty
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

FLEXBOX PROGRAMMING TOOL FOR THE

AUTOMOTIVE SECTOR

USER
FLEXBOX - BORN TO BE FLEXIBLE
FLX2.14

SKU: FLX1.9

This manual contains information on the features and operation of FLEXBox when used
with the FLX2.14 FLEXBox OBD Female cable.

The manual illustrates the basic instructions for proper operation and describes the
functions that are enabled when connecting with the FLX2.14 cable.
SETUP PHASE

PLUG THE 2.14 FLEX CABLE INTO THE FLEXBOX DB44 SOCKET

CONNECT THE FLEXBOX TO THE POWER SUPPLY

FLEXBOX INTERFACE VIA 2.14 FLEX CABLE WITH THE PROGRAMMER

FLEXBOX INTERFACE VIA COLORED SILICON CABLES WITH THE UNIT

THE LINES WILL LIGHT UP AS SHOWN

WAIT FOR THE BUTT TO LIGHT UP AND TAP

FIRST FUNCTION
CAN-H

K-LINE

1 2 3 4 5 6 7 8 FLX2.14

9 10 11 12 13 14 15 16

CAN-L +14V

L-LINE

FLX2.14 PIN OUT

st
TAP

CAN-HI

CAN-LO
K-LINE

L-LINE

SLOW BLINKING LED 0 Volt (~ mA)

FAST BLINKING LED 3,3 Volt (~ mA) +5 Volt (~ mA)


SHORTCUT
SECOND FUNCTION
CAN-H

K-LINE

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16
FLX2.14

CAN-L +14V

L-LINE

FLX2.14 PIN OUT

+14 Volt POWER SUPPLY

nd
TAP

CAN-HI
CAN-LO
K-LINE

L-LINE

SLOW BLINKING LED 0 Volt (~ mA)

FAST BLINKING LED 3,3 Volt (~ mA) +5 Volt (~ mA)


SHORTCUT

THIRD FUNCTION

CAN-H

K-LINE

1 2 3 4 5 6 7 8
FLX2.14

9 10 11 12 13 14 15 16

CAN-L +14V
AUT IGN
L-LINE ON

FLX2.14 PIN OUT


+14 Volt
+14 Volt

IGNITION
AUTOMATICALLY
CONTROLLED BY
rd
TAP
K-LINE

CAN-HI

CAN-LO
K-LINE

L-LINE

SLOW BLINKING LED 0 Volt (~ mA)

FAST BLINKING LED 3,3 Volt (~ mA) +5 Volt (~ mA)


SHORTCUT
FOURTH FUNCTION
CAN-H

K-LINE

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16
FLX2.14

CAN-L +14V

L-LINE

FLX2.14 PIN OUT

+14 Volt P.S.


A4
+14 V / 0 Volt

th
TAP
IGN MANAGED
BY THE USER
CAN-HI
LOOP MODE
CAN-LO
EACH PUSH
K-LINE IGN ON/OFF
LOOP MODE
L-LINE
PRESS 3 SEC
SLOW BLINKING LED 0 Volt (~ mA)
TO RESET

FAST BLINKING LED 3,3 Volt (~ mA) +5 Volt (~ mA)


SHORTCUT

IN LOOP MODE IT IS POSSIBLE TO SWITCH BETWEEN 0V AND 14V (referred to A4):

TAP K-LINE ING


st

0V 0V
nd

14 V 14 V

KEEP PRESSED 3 SECONDS TO EXIT THE LOOPMODE AND RETURN TO THE FIRST FUNCTION.

You might also like