data sheet

DGT TRANSMITTER/ INDICATOR

Multipurpose weight transmiiter for panel mounting on DIN bar.
Ideal as 4-channel digital junction box, permitting the direct reading and diagnostics of each connected load cell. The wide
range of available interfaces, makes it easy to integrate the weighing with any automation system. CE-M approval is under way.

FEATURES I/O SELECTION

• Easy to use 5-key waterproof keyboard.
• RS232/C bidirectional port configurable
• Highly efficient red LED display with 6 9-mm digits and 6
for connection with external units.
LEDs for showing active functions.
• RS485 bi-directional port configurable for PC, PLC.
• Case for mounting on DIN bar or on the wall.
• Two 0.5A 48 Vac relay outputs (NO or NC) which may
• 106 x 90 mm size, 58 mm height
be configured as programmable weight thresholds or
• Calibration, Set-Up parameters, configurable from keyboard
as over/under check.
or from PC with DINI TOOLS V.3.1
• 2 configurable optoisolated inputs.
• Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/d for
• MODBUS serial protocol (DGT4, DGT4AN)
CE-M approved legal for trade use (not yet available)
• With PROFIBUS serial protocol (DGT4PB).
• Up to displayable 300.000e for internal factory use.
• With 16-bit analogue output 4-20mA / 0-5Vdc /
• Up to 3 signal linearisation points
0-10Vdc at choice (DGT4AN)
• Internal resolution up to 3.000.000 points
• A/D 24-bit sigma-delta conversion,
up to 200 conv./sec. autoselect keypad selectable
• Manages a scale with 4 channels or a system functions functions
with up to 24 cells with digital equalisation • Zeroing • 2 programmable
(6 DGT’s in network). • Automatic tare weight thresholds
• Connectable with up to 8 analogue load cells with 350 Ohm • Presettable tare • Weight accumulation
input resistance. • Printing and/or data • Formula weighing
• From 12 Vdc to 24 Vdc power supply. transmission • Counting
• Function command • Hold
• on/off • Peak
models available:
DGT4: Standard model with 2 inputs, 2 outputs, 1 RS232
bidirectional port and 1 RS485 bidirectional port 62
45
DGT4AN: Standard model with 2 inputs, 2 outputs, 1 RS232
bidirectional port and 1 RS485 bidirectional port and
analogue output 4-20Ma / 0-5 Vdc / 0-10 Vdc
58

DGT4PB: Standard model with 2 inputs, 2 outputs, 1 RS232

bidirectional port and PROFIBUS
90 106

Scandinavia’s largest webshop for scales

Box 79, Industrivagen 3
760 40 Vaddo, Sweden
Tel. +46 (0)176-208920
Fax +46 (0)176-208929
Web www.vetek.com
Email [email protected]
REVISED
03.2010 1