Powerkey Pro Pkp-2400-Si: Flexible - Smart - Rugged

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

AUTOMOTIVE - MARINE

POWERKEY PRO PKP-2400–SI

DESIGN YOUR OWN


PROTOTYPE ONLINE

CANopen
J1939

FLEXIBLE - SMART - RUGGED

PKP-2400-SI is a compact keypad based on CAN protocol. It comes equipped with eight keys with interchangeable 15 mm inserts. The
keypad is water and dust resistant, and can be installed both inside and outside the cockpit. RGB led lights and the ease with which icons
can be switched in and out make it possible for the user to customize each key in a wide range of variations.

SOFTWARE FEATURES CANopen Communications Protocol – Fully compliant with


CAN and RS485 Keypad Addresses – Assign any valid CAN and Device Profile 401d.
RS485 address to the keypad. Communicate on either BUS simulta-
neously. HARDWARE FEATURES
IP67/IP69K waterproof rating – Guaranteed to be dust tight
J1939 Address Claim Transmission – Keypads no longer have to and sealed against water immersion to a depth of 1 meter for up
be pre-programmed to a specific address. This enables customers to 1 hour. The IP69K rating provides protection against high
that work in applications in the field without access to a GUI to use pressure water at high temperature spray downs.
any replacement keypad on-hand. The keypad can be configured to
automatically announce its address and accept a new address UV Protected – UVB 400 hours: Keypad is highly resistant to
assignment as appropriate. deterioration caused by exposure to sunlight.

Event Status Transmission – The keypad can send messages to Customizable inserts – The replacement system for individual
the BUS indicating a button press or a button release event has inserts makes modifying the keypad layout simpler and more
occurred. This confirmation allows digital systems to have the economical. Hundreds of different stock inserts can be viewed at
same input acknowledgements as that of the latching position of a blinkmarine.com, and it is possible to order customized ones.
mechanical switch.
A membrane compensation valve which self compensate the
Periodic Status Transmission – The keypad sends a continuous internal pressure within the keypad, alleviating mechanical stresses
broadcast of messages indicating the press or release status of that can be produced by shifts in external temperatures.
each button at that instance. The frequency of these messages
can be adjusted in a wide range. The keypad’s symmetrical design and spacing between keys
makes it easier to install multiple keypads alongside one another.
Online Set-up – An online set-up system makes it possible to select and
design your own prototype, then order it directly on blinkmarine.com.

Periodic Heartbeat – The keypad sends a continuous broadcast of


messages indicating it is functioning correctly. The frequency of
these messages can be adjusted in a wide range.

Icons shown on this keypad are for visual demonstration only.


123.50 mm
STANDARD FEATURES 4.86’’

• Reconfigurable keys • Multicolor indicator rings


• Relegendable buttons • Laser etched icons
• LED state & status configurable • ON/OFF, momentary,
• Vertical or horizontal mount toggle & scroll
• Flush or front mount • Hundreds of stock icons to

70.00 mm
• LED backlit icons choose from

2.75’’
SOFTWARE FEATURES
• Change CAN or RS485 keypad • LED acknowledgement
addresses independently • Address claim transmission
• Periodic status transmission • RS485, CANopen and J1939
• Heartbeat
• Event status transmission

GREEN= TxRx-(RS485) ORANGE= TxRx+(RS485)


OTHER BENEFITS BLACK=GROUND WHITE=CAN HIGH
RED=POWER BLUE=CAN LOW
• Programmer’s manual
available to help support
plug-and-play reconfigurability

4 3 2 1

SPECIFICATIONS FOR STANDARD


KEYPADS
ELECTRICAL 8 7 6 5
Supply Voltage 12-24Vdc Nominal (8-32VDC)
Standby Current <50 mA
Communication BUS RS485, CANopen, J1939
MTBF 238506 hours (in accordance with
MIL-HDBK-217 – operating environment
Ground Mobile)
16.30 mm
0.64’’

MECHANICAL
Connector Deutsch DT04-4P
Switch Life 3 million operations
Mounting Studs #10-32 CDA-510 phosphor bronze,
electroplated bright tin
Keypad Silicone rubber with polyurethane hardcoat
PC Board 1,6mm thick, Nema Grade FR-4, double
clad with 1oz copper
Operating Temperature -40°C to +70°C #10 - 32 STUDS
Storage Temperature -40°C to +85°C
(X2)16.30 mm

Thermal Shock -40°C to +85°C According to table 2 of


78.00
ISO16750-4
3.07’’
UV Protection UVB 400 hours
Salt Spray Per ASTMB117
0.64’’

Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol, MOUNTING NOTES:


Nuts thread: #10-32
Suntan Lotion, Multi-Purpose Cleaner,
Orange Citrus Cleaner, Muriatic Acid ≈ Maximum torque: 0,8Nm
Ingress protection Rating IP67/IP69K
Weight 170 gr (Inserts excluded) NOTE: ALL CONNECTION WIRES
165.00 mm

ARE THE SAME LENGTH


6.49’’

Blink S.r.l.
Via Montefeltro, 6 - 20156 Milano - Italy
Tel. +39 02 3088583 - Fax +39 02 33406697
www.blinkmarine.com - [email protected]
!WARNING! IMPROPER SELECTION, IMPROPER USE AND/OR FAILURE OF THE BLINK SYSTEMS PRODUCTS
DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Blink, provide product and/or system options for further
investigation by users having technical expertise. It is important to analyze all aspects of the application,
including consequences of any failure. Due to the variety of operating conditions and applications for these
product(s), the manufacturer of the application is solely responsible for marking the final selection of the
product(s) and assuring that all performance, safety and warning requirements of the application are met. The
products described herein, including without limitation, product features, specifications, designs, availability and
pricing, are subject to change by Blink at any time without notice.

You might also like