Scribd
Upload
222 views

Show-Tech Server-C Via GUI and CLI

This document provides instructions for gathering technical support information when contacting Cisco about issues with Cisco servers. It describes how to use the Cisco Integrated Management Controller (CIMC) GUI or CLI to collect logs, sensor readings, and a show-tech details file containing configuration information and diagnostic data. This make it easier for Cisco Technical Assistance Center (TAC) engineers to troubleshoot and resolve technical issues.

Uploaded by

Mirko puglini
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
222 views

Show-Tech Server-C Via GUI and CLI

This document provides instructions for gathering technical support information when contacting Cisco about issues with Cisco servers. It describes how to use the Cisco Integrated Management Controller (CIMC) GUI or CLI to collect logs, sensor readings, and a show-tech details file containing configuration information and diagnostic data. This make it easier for Cisco Technical Assistance Center (TAC) engineers to troubleshoot and resolve technical issues.

Uploaded by

Mirko puglini
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Se n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a ck @ c i s c o .

c o m

CH A P T E R 3
Contacting Technical Support

This chapter describes the steps to take when contacting Cisco Technical Support.
This chapter includes the following sections:
• Gathering Information Before Calling Support, page 3-1
• Using Cisco CIMC GUI to Collect show-tech Details, page 3-2
• Using Cisco CIMC GUI to Display System Event Log Events, page 3-2
• Using Cisco CIMC GUI to Display Sensor Readings, page 3-2
• Using Cisco CIMC GUI to Display CIMC Log, page 3-2
• Using Command Line Interface (CLI) to Collect show-tech Details, page 3-3

Note If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you
purchased support directly from Cisco, contact Cisco Technical Support at this URL:
http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html

Gathering Information Before Calling Support


If you cannot isolate the issue to a particular component, please consider the following questions as they
may be helpful when contacting the Cisco Technical Assistance Center (TAC).
• Was the server working before the problem occurred?
• Was this a newly installed server?
• Was this server assembled on-site or did it arrive assembled from Cisco?
• Has the memory been re-seated?
• Was the server powered off or moved from one site to another?
• Have there been any recent upgrades? If so, list all of them.
When contacting Cisco TAC for issues it is always important to capture the tech-support output from the
server. This can be done from the Cisco Integrated Management Controller (CIMC) GUI.

Cisco C-Series Servers Troubleshooting Guide


OL-24469-02 3-1
Chapter 3 Contacting Technical Support
Using Cisco CIMC GUI to Collect show-tech Details

Se n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a ck @ c i s c o . c o m

Using Cisco CIMC GUI to Collect show-tech Details


A summary report containing configuration information, logs, and diagnostic data can be generated from
the Cisco CIMC GUid. The details will help Cisco TAC in troubleshooting and resolving a technical
issue. Use this procedure when requested.
1. In the Navigation pane, click the Admin tab.
2. On the Admin tab, click Utilities.
3. In the Actions area of the Utilities pane, click Export Technical Support Data.
4. In the Export Technical Support Data dialog box, complete these fields:
– TFTP Server IP Address field—The IP address of the TFTP server on which the support data
file should be stored.
– Path and Filename field—The file name in which the support data should be stored on the
server. When you enter this name, include the relative path for the file from the top of the TFTP
tree to the desired location.
5.Click Export.

Using Cisco CIMC GUI to Display System Event Log Events


On the Cisco CIMC GUI, complete these steps to display the System Event Log (SEL) events:
1. In the Navigation pane, click the Server tab.
2. On the Server tab, click System Event Log.
3. To review the following information for each system event in the log, navigate the log using these
options:
– From the Entries Per Page drop-down list, select the number of system events to display on
each page.
– Click <Newer and Older> to move backward and forward through the pages of system events,
or click <<Newest to move to the top of the list. By default, the newest system events are
displayed at the top if the list.

Using Cisco CIMC GUI to Display Sensor Readings


On the Cisco CIMC GUI, complete these steps to display the sensor readings:
1. In the Navigation pane, click the Server tab.
2. On the Server tab, click Sensors.
3. View various sensors by clicking on the desired sensor.

Using Cisco CIMC GUI to Display CIMC Log


On the Cisco CIMC GUI, complete these steps in order to display the CIMC log:
1. In the Navigation pane, click the Admin tab.

Cisco C-Series Servers Troubleshooting Guide


3-2 OL-24469-02
Chapter 3 Contacting Technical Support
Using Command Line Interface (CLI) to Collect show-tech Details

Se n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a ck @ c i s c o . c o m

2. On the Admin tab, click CIMC Log.


3. On the Entries Per Page drop-down list, select the number of CIMC events to display on each page.

Using Command Line Interface (CLI) to Collect show-tech


Details
On the CLI, enter:
~ # scope cimc
~ /cimc # scope
firmware
log
network
tech-support
~ /cimc # scope tech-support
~ /cimc/tech-support # set tftp-ip 192.168.1.1
~ /cimc/tech-support *# set path \techsupport\showtech
~ /cimc/tech-support *# commit
~ /cimc/tech-support *# start

These are descriptions of some of the key fields within the show-tech command:
• var/—Contains detailed logs, and status of all monitored services. It also contains services
information files such as the configuration of SOL and IPMI sensor alarms.
• var/log—Contains the rolling volatile log messages.
• obfl/—Contains the rolling non-volatile log messages.
• met/—Non-volatile configuration and SEL.
• tmp/—The show tech-support text files, along with BIOS tech-support text files. The text files
contain all process, network, system, mezzanine, and BIOS state information.
• mctool—Gets basic information on the state of the CIMC.
• network—Gets current network configuration and socket information.
• obfl—Gets live obfl
• messages—Gets live /var/log/messages file
• alarms—Lists sensors in alarm states.
• sensors—Current sensor readings from IPMI.
• power—Current power state of the x86.

Cisco C-Series Servers Troubleshooting Guide


OL-24469-02 3-3
Chapter 3 Contacting Technical Support
Using Command Line Interface (CLI) to Collect show-tech Details

Se n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a ck @ c i s c o . c o m

Cisco C-Series Servers Troubleshooting Guide


3-4 OL-24469-02

You might also like