Scribd
Upload
251 views12 pages

Manual For P2P IP CAMERA Android APP: Mouse Over The Icon Will Be Prompted

This document provides instructions for using the P2PIPCamNew5.2pp Android app. There are three main ways to add IP cameras: 1) search for cameras on the same local network, 2) scan the QR code on the camera, or 3) manually enter the camera's device ID. The app allows viewing live video streams, taking photos and videos, adjusting camera settings like resolution and infrared lights, and receiving alarm notifications by email.

Uploaded by

jrobs.santos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
251 views12 pages

Manual For P2P IP CAMERA Android APP: Mouse Over The Icon Will Be Prompted

This document provides instructions for using the P2PIPCamNew5.2pp Android app. There are three main ways to add IP cameras: 1) search for cameras on the same local network, 2) scan the QR code on the camera, or 3) manually enter the camera's device ID. The app allows viewing live video streams, taking photos and videos, adjusting camera settings like resolution and infrared lights, and receiving alarm notifications by email.

Uploaded by

jrobs.santos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Manual for P2P IP CAMERA Android APP

Mouse over the icon will be prompted

Note : Make sure that the phone is able to connect to the Internet before use the Android
APP..

• Download ways:

 Find the “P2PIPCamNew5.2pp.apk”file in the CD.Install it at Android mobile phones.Pls


be patient until the Android APP installed and displayed on the screen.

 Users can download Google stores, search the keyword "COOLCAMOP"


find “COOLCAM” to install it

1. Initial interface
Choose to install the software

Complete the installation

Run the APP

2. Add cameras

How to add cameras,pls check as below.


1. Click here to add a camera

2. Click here to search the camera IN


LAN

3. Click Search to camera ID number


4. Click Finish

Pls name the camera’s name

The default user name＞admin

The default password is blank

5. Click here to see the video

Three ways to add cameras.

One: Click Search LAN, user can search and add cameras in one LAN,if the cameras and
phones are not in one LAN,then cameras won’t be searched.

Two: Click " Scan ID” Scan the QR Code on the housing of IP camera. It
will find and add the ID automatically,Then click to finish.
Three: Input the UID on the “Device ID” of the Android APP. The default username is:
admin.No password.Note:the “Device ID”is on the bottom of the ip cameras.

3. Viewing interface

Click Back to exit monitoring interface


Click here to see the video

Click on the menu operation interface


ºCamera operator interface :

Switch to fullscreen

ºCamera full-screen mode :

4. The interface button function Description

Editcamera:
PTZ will move along the direction of the finger sliding

Click button to edit the camera


Click the button to delete or edit
the cameras.

Alarm events, camera pictures and videos:


View alarm events View to taking pictures Open the video file

PT control :

Description (from left to right) :

1. Exit video views

2. About image flip

3. Image upside down

4. Police closed

5. Report to the police to open

Toolbar:

Description (from left to right) :


1. On / off full screen

2. On / off voice monitoring

3. Photo

4. Video

5. Watch mode,speed is preferr,Queality first,speed quality center

6. Resolution switching

7. preset bit set

8. Power frequency setting

9. infrared light switch

10. Saturation

11. Contrast

12. Video parameters reset

(In the mobile network or the network used by the camera , the poor circumstances , can
adjust the resolution and to reduce the number of contracting )

5. Camera settings

The circular arrows corresponding to the right of the selected equipment Click
equipment , to enter the camera settings interface , as shown below:
Parameter Settings

5.1 .WIFI Setting : click WIFI settings enter WIFI setting interface , the search near WIFI
hotspot , choose a wireless router to enter the password , click OK , reboot your machine
connected to WIFI , as shown below

5.2 . User Settings：Can set user name and password of the administrator and operator
5.3 . Alarm settings: You can set the alarm parameters

5.4 Mail Settings: You must fill in the correct sender and receiver mailbox and mail server
parameters

You might also like