Component Locations

Description
Cooler Gp Cover Gp - Inlet Cover Gp - Outlet Cover Gp - Steer Priority Valve Cylinder Gp - Boom Cylinder Gp - Bucket, Std Cylinder Gp - (ST) Lift 416D BKG BKJ BFP 424D BGP BKR 416D B2D BGJ BFP 1-Up 1-1049 5178-Up 397-Up 418-Up 1-Up 1050-1140 12900-Up 206-3549

RENR3586-03 January 2005

Schematic Location
C-14 C-9
VARIABILITY PUMP or MOTOR FLUID CONDITIONER SPRING

FLUID POWER SYMBOLS

BASIC COMPONENT SYMBOLS
MAIN AUX.

Part Number
154-3799 200-0161 6E-4158 191-4010 206-3628 206-0514

Machine Location
1 43 2 3 5 6

CONTROL VALVES

RESTRICTION

LINE RESTRICTION (FIXED)

2-SECTION PUMP

PUMP: VARIABLE and PRESSURE COMPENSATED

C-2 H-10 D-8 D-5

ONE POSITION

SPRING (ADJUSTABLE)

LINE RESTRICTION (VARIABLE)

PRESSURE COMPENSATION

HYDRAULIC PNEUMATIC ENERGY TRIANGLES

LINE RESTRICTION
VARIABLE and PRESSURE COMPENSATED

ATTACHMENT

VALVES
VALVE ENVELOPES VALVE PORTS

TWO POSITION

THREE POSITION

TWO-WAY

THREE-WAY

FOUR-WAY

CONTROL VALVES
AB AB

CHECK VALVES

206-3549 206-3549 206-3549 206-3549 230-0979 230-0979 230-0979 228-3499 228-3500 167-4235 235-9829 228-3506 228-3506 206-3553 210-6243 186-3629 238-8550 7 8 9 10 11 12 13 14 19 15 16 I-5 I-3 F-14 D-4 D-7 D-7 F-12 H-15 E-14, C-8 F-15 B-12 B-13 C-6 C-7 C-5 E-10 E-7 H-6, H-3 D-11 D-11 C-4 C-7 F-10 G-8 F-7 C-8 C-8 C-5 C-5 C-4 C-4 C-7 H-10
SPRING LOADED GAS CHARGED PRESSURE TEMPERATURE FLOW UNIDIRECTIONAL BIDIRECTIONAL P T NORMAL POSITION P T SHIFTED POSITION INFINITE POSITION BASIC SYMBOL SPRING LOADED SHUTTLE PILOT CONTROLLED

E-12

MEASUREMENT

ROTATING SHAFTS

FLUID STORAGE RESERVOIRS

Cylinder Gp - Stabilizer, LS Cylinder Gp - Stabilizer, RS Cylinder Gp - Steer Cylinder Gp - Stick Cylinder Gp - Swing Cylinder Gp - Swing Cylinder Gp - Tilt, ST Filter Gp Manifold - Return Pump Gp - Metering, HMU Pump Gp - Piston 416D 424D Tank Gp - Hydraulic Valve Gp - Control, Backhoe

AA

BB

416D and 424D Backhoe Loader Hydraulic System

416D: BKG1-UP BFP1-UP B2D1-UP BGJ1-UP 424D: BGP1-UP BKR1-UP

VENTED

PRESSURIZED

RETURN ABOVE FLUID LEVEL

RETURN BELOW FLUID LEVEL

COMBINATION CONTROLS

42 16

SOLENOID

SOLENOID or MANUAL

SOLENOID and PILOT

SOLENOID and PILOT or MANUAL

SERVO

THERMAL

DETENT

MANUAL CONTROL SYMBOLS

PUSH-PULL LEVER

MANUAL SHUTOFF

GENERAL MANUAL

PUSH BUTTON

PEDAL

SPRING

245-8998 235-4108 240-9721 180-8592 17 53 21 22 23 42 39 24 25 26 27 28 37 41 31 35 33 30 29 32 34 36

PILOT CONTROL SYMBOLS

Valve Group - Stabilizer, 2 Bank (42), Pilot Oil Pressure Test Port (AA)

Hydraulic Pump (16), Signal Pressure Test Port (BB)

RELEASED PRESSURE

REMOTE SUPPLY PRESSURE

EXTERNAL RETURN

INTERNAL RETURN

SIMPLIFIED

COMPLETE

4 Bank Valve Gp - Control, Boom Valve Gp - Control, Bucket Valve Gp - Control, Lift Valve Gp - Control, Relief 185-5898 Stabilizer, 2 Bank Valve Gp - Control, Stabilizer Valve Gp - Control, Steer Priority Valve Gp - Control, Steer Priority 185-5906 2 Bank Loader Valve Gp - Control, Stick Valve Gp - Control, Swing Valve Gp - Control, Tilt Valve Gp - Pilot, 2 Bank Valve Gp - Reducing, Stabilizer Valve Gp - Relief, Boom Valve Gp - Relief, Boom Valve Gp - Relief, Bucket Valve Gp - Relief, Bucket Valve Gp - Relief, Stick Valve Gp - Relief, Stick Valve Gp - Relief, Swing Valve Gp - Relief, Tilt 190-3402 166-7950 168-0361 185-5902 239-2226 6E-6284 6E-6285 187-0524 187-0527 6E-6281 9T-0704 137-9466 9T-0704 Attachments Cylinder Gp - E Stick Cylinder Gp - E Stick Bucket Cylinder Gp - MP Bucket Valve Gp - Control, Aux Valve Gp - Control, Aux Valve Gp - Control, Backhoe 203-5489 4 Bank With TUV Valve Gp - Control, Backhoe 203-5490 5 Bank With TUV Valve Gp - Control, Backhoe 203-5533 6 Bank With TUV Valve Gp - Control, E Stick Valve Gp - Control, Side Shift 180-8593 5 Bank Valve Gp - Control, Side Shift 180-8594 6 Bank Valve Gp - Control, Steer Priority 185-5907 3 Bank Loader Valve Gp - Pilot, 2 Bank Valve Gp - Relief 185-5901 9T-0704 All Wheel Steer Cylinder Gp - AWD Steer 214-5097 Ride Control Accumulator Gp - Ride Control Switch As - Pressure Valve Gp - Mounting 416D 424D 162-3960 131-9203 243-2266 62 222-1684 E-13 60 61 F-13 D-12 59 F-14 38 58 G-8 F-11, H-11 56 D-11 55 C-6 54 C-6 190-3450 51 C-2 50 C-6 49 C-6 20 C-6 191-7725 206-0518 185-1839 124-8818 190-3450 44 45 46 48 52 D-3 D-5 H-12 G-10 C-9
BIDIRECTIONAL BIDIRECTIONAL
FLOW IN ONE DIRECTION PARALLEL FLOW

INTERNAL SUPPLY PRESSURE

190-3397 190-3400 130-6520

ACCUMULATORS

CROSSING AND JOINING LINES

HYDRAULIC AND PNEUMATIC CYLINDERS

LINES CROSSING

LINES JOINING

SINGLE ACTING

DOUBLE ACTING

HYDRAULIC PUMPS
FIXED DISPLACEMENT VARIABLE DISPLACEMENT NON-COMPENSATED

HYDRAULIC MOTORS
FIXED DISPLACEMENT VARIABLE DISPLACEMENT NON-COMPENSATED

INTERNAL PASSAGEWAYS
INFINITE POSITIONING THREE POSITION TWO POSITION

192-0827 188-7471

UNIDIRECTIONAL

UNIDIRECTIONAL
CROSS FLOW

FLOW ALLOWED IN EITHER DIRECTION

Volume 1: Single Tilt Loader with Center Pivot Backhoe

2005 Caterpillar All Rights Reserved

Printed in U.S.A.

37 38

Electrical Symbols Table

17 15 10
Hydraulic Symbols (Electrical)

Transducer (Fluid)

Transducer (Gas / Air)

Generator

Electric Motor

13 5 1
Pressure Switch Pressure Switch (Adjustable) Temperature Switch Electrical Wire

RENR3586-03 VOL 1

6 45

Electrical Symbols (Electrical)

44
T

CC
16

Pressure Symbol

Temperature Symbol

Level Symbol

Flow Symbol

Wire Number Identification Codes Electrical Schematic Example Hydraulic Schematic Example
Current Standard
Wire Circuit Number Identification Wire Color

Hydraulic Pump (16), Pump Pressure Test Port (CC)

Current Standard
Harness identification code This example indicates wire 135 in harness "AG".

2 20 21 22 26 27 29 30 31 32 33 34 35 43 49 50 51 53 54 55 11 12 39 40 41 42 14 16 3 23 24 25 28 36 48 52 56
Wire

325-AG135 PK-14 325-PK

Circuit Identification Number Wire Color Wire Gauge

19

60 61 62

9 59

46

Tap Locations Pressure, Sampling, and Sensor

Tap Number
AA BB CC

58

Previous Standard
Wire Color

Description
Pilot Pressure Test Port Signal Pressure Test Port Pump Pressure Test Port

Schematic Location
H-7 C-11 A-11

325-PK-14
B
Circuit Number Identification Wire Gauge
(EXAMPLE VALVE)

Machine Component Locations

20 Page, RBM

15

14

13

12

11

10

CYLINDER GP- STABILIZER 228-3500 VALVE GP- RELIEF 9T-0704 STEER PRIORITY OUTLET COVER 191-4010 CYLINDER GP- STABILIZER 228-3499 VALVE GP- CONTROL STABILIZER 192-0827

VALVE GP- CONTROL STABILIZER 192-0827

FILTER GP 210-6243

AA
H

AUX CONTROL VALVE 124-8818

CYLINDER GP- MP BUCKET 185-1839

DOWN

UP

DOWN

UP

T1 CYLINDER GP- STEER 167-4235 CYLINDER GP- STEER, AWD 214-5097 TILT CONTROL VALVE 168-0361

VALVE GP- PILOT, 2 BANK 185-5901, LEVER - SWITCH 185-5902, LEVER - STABILIZER MANIFOLD GP- RETURN 186-3629 VALVE GP- REDUCING PRESSURE, STABILIZER 239-2226 VALVE GP- CONTROL STABILIZER 185-5898, 2 BANK
F

PUMP GP- METERING HMU 238-8550

VALVE GP- MOUNTING (416D) - 243-2266 (424D) - 222-1684 ACCUMULATOR GPCYLINDER GP- TILT RIDE CONTROL 206-3553 162-3960

VALVE GP- P RELIEF A 9T-0704

LIFT CONTROL VALVE 130-6520

ACC

H S

R CYLINDER GP- (ST) LIFT 206-3549 230-0979 SWITCH AS- PRESSURE 131-9203 SWING CYLINDER 228-3506 BOOM CYLINDER 206-3628 STICK CYLINDER 235-9829 E STICK CYLINDER 191-7725

PS

CYLINDER 206-0514, STD BUCKET 206-0518, E STICK BUCKET

D

OUTLET COVER 6E-4158 RELIEF VALVE 187-0524 RELIEF VALVE 9T-0704

D

INLET COVER 200-0161 S1 VALVE GP- CONTROL STEER PRIORITY 188-7471 185-5906, 2 BANK LOADER 185-5907, 3 BANK LOADER

RENR3586-03 VOL 1

RELIEF VALVE 6E-6285

RELIEF VALVE 137-9466

20 Page, Color 2, RBM

PUMP GP- PISTON (416D) - 245-8998 (424D) - 235-4108

C

COOLER GP154-3799 TANK GP- HYDRAULIC 240-9721

BB

AUX CONTROL VALVE 190-3450 T

VALVE RELIEF 6E-6284

BOOM CONTROL VALVE 190-3397 VALVE GP- CONTROL SWING 166-7950 VALVE GPBACK HOE 180-8592, 180-8593, 180-8594, 203-5489, 203-5490, 203-5533, CONTROL 4 5 6 4 5 6

RELIEF VALVE 187-0527 BUCKET CONTROL VALVE 190-3400

RELIEF VALVE 6E-6281 STICK CONTROL VALVE 190-3402 E STICK CONTROL VALVE 190-3450
HYDRAULIC CIRCUIT COLOR DESCRIPTIONS
Main Pump Output Load Sense Circuit Supply Line Drain / Return Line Hand Metering Unit Control Circuit Lift Cylinder Control Circuit Auxiliary Control Circuit Tilt Cylinder Control Circuit Bucket Cylinder Control Circuit Boom Cylinder Control Circuit Swing Cylinder Control Circuit Bucket / E-Stick Control Circuit
Stabilizer Cylinder Control Circuit

LINE PATTERNS
Pressure Line Pilot / Load Sensing Pressure Drain / Return Lines Component Group Attachment Air Line

CC

BANK BANK BANK BANK WITH TUV BANK WITH TUV BANK WITH TUV

CALLOUTS
YY

E-Stick Cylinder Control Circuit

Taps (Pressure, Sampling,Sensor) by letter Components by number

52

THIS SCHEMATIC IS FOR THE 416D and 424D

SINGLE TILT LOADER WITH CENTER PIVOT BACKHOE (VOLUME 1) Part #: 201-6837

Components are shown installed on a fully operable machine with the key and engine off and transmission shifter in neutral.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

Component Locations
Description
Cooler Gp Cover Gp - Inlet, TUV Cover Gp - Outlet Cover Gp - Steer Priority Valve Cylinder Gp - Boom Cylinder Gp - Bucket, Std Cylinder Gp - (ST) Lift 416D BKG BKJ BFP 424D 416D BGP BKR B2D BGJ BFP Cylinder Gp - Steer Cylinder Gp - Stick Cylinder Gp - Swing Cylinder Gp - Swing Cylinder Gp - Tilt, ST Filter Gp Pump Gp - Metering, HMU Pump Gp - Piston Tank Gp - Hydraulic Valve Gp - Control, Backhoe 4 Bank Valve Gp - Control, Boom Valve Gp - Control, Bucket Valve Gp - Control, Lift Valve Gp - Control, Relief Stabilizer, 2 Bank Valve Gp - Control, Steer Priority Valve Gp - Control, Stabilizer Valve Gp - Control, Steer Priority 2 Bank Loader Valve Gp - Control, Stick Valve Gp - Control, Swing Valve Gp - Control, Tilt Valve Gp - Reducing, Stabilizer Valve Gp - Relief Valve Gp - Relief, Boom Valve Gp - Relief, Boom Valve Gp - Relief, Bucket Valve Gp - Relief, Bucket Valve Gp - Relief, Stick Valve Gp - Relief, Stick Valve Gp - Relief, Swing Valve Gp - Relief, Tilt Valve Gp - Solenoid, Clamp - Side Shift Valve Gp - Solenoid, TUV Cover Gp - Inlet, BH Valves Without TUV Cylinder Gp - E Stick Cylinder Gp - E Stick Bucket Cylinder Gp - MP Bucket Valve Gp - Control, Aux Valve Gp - Control, Aux Valve Gp - Control, Backhoe 4 Bank Without TUV Valve Gp - Control, Backhoe 5 Bank With TUV Valve Gp - Control, Backhoe 6 Bank With TUV Valve Gp - Control, E Stick Valve Gp - Control, Side Shift 5 Bank Without TUV Valve Gp - Control, Side Shift 6 Bank Without TUV Valve Gp - Control, Steer Priority 3 Bank Loader Valve Gp - Relief, Cushion Cylinder Gp - AWD Steer Accumulator Gp - Ride Control Switch As - Pressure Valve Gp - Mounting 416D 424D 416D 424D 1-Up 1-1049 5178-Up 397-Up 418-Up 1-Up 1050-1140 12900-Up 206-3549

RENR3586-03 January 2005

PUMP or MOTOR FLUID CONDITIONER SPRING

FLUID POWER SYMBOLS

BASIC COMPONENT SYMBOLS
MAIN AUX.

Part Number
154-3799 202-2236 193-9189 191-4010 206-3628 206-0514

Machine Schematic Location Location

1 43 2 3 5 6 C-14 C-9

CONTROL VALVES

RESTRICTION

LINE RESTRICTION (FIXED)

2-SECTION PUMP

PUMP: VARIABLE and PRESSURE COMPENSATED

VARIABILITY

C-1 H-10 D-7 D-5

ONE POSITION

SPRING (ADJUSTABLE)

LINE RESTRICTION (VARIABLE)

PRESSURE COMPENSATION

HYDRAULIC PNEUMATIC ENERGY TRIANGLES

LINE RESTRICTION
VARIABLE and PRESSURE COMPENSATED

ATTACHMENT

VALVES
VALVE ENVELOPES VALVE PORTS

TWO POSITION

THREE POSITION

TWO-WAY

THREE-WAY

FOUR-WAY

CONTROL VALVES
AB AB

CHECK VALVES

206-3549 206-3549 206-3549 206-3549 230-0979 230-0979 230-0979 173-4565 167-4235 235-9831 228-3506 228-3507 206-3553 210-6243 238-8550 245-8998 235-4108 240-9721 203-5483 190-3431 190-3428 130-6520 185-5898 188-7471 222-0364 185-5906 190-3430 166-7950 168-0361 239-2226 9T-0704 6E-6284 6E-6285 187-0524 187-0527 6E-6281 9T-0704 137-9466 9T-0704 3E-8622 179-5593 Attachments 200-0161 191-7725 206-0518 185-1839 124-8818 190-3450 185-5903 203-5484 203-5485 190-3450 185-5904 185-5905 185-5907 206-3685 46 48 52 20 49 50 51 54 55 56 7 59 60 61 62 37 44 C-9 D-2 D-5 H-12 H-11 C-8 C-5 C-5 C-5 C-2 C-5 C-5 D-11 D-5 F-14 F-13 D-12 F-13
42
T
PRESSURE TEMPERATURE FLOW UNIDIRECTIONAL BIDIRECTIONAL

E-12

P T NORMAL POSITION

P T SHIFTED POSITION

INFINITE POSITION

BASIC SYMBOL

SPRING LOADED

SHUTTLE

PILOT CONTROLLED

MEASUREMENT

ROTATING SHAFTS

Cylinder Gp - Stabilizer

8 9 10 11 12 13 14 15 16 17 53 21 22 23 42 24 39 25 26 27 28 41 58 31 35 33 30 29 32 34 36 38 19

I-4 & I-6 F-14 D-4 D-7 D-6 & E-6 G-12 H-15 F-14 B-12 B-14 C-5 C-7 C-4 E-10 F-8 D-11 H-4 & H-7 D-11 C-3 C-6 F-10 G-8 G-10 C-7 C-7 C-5 C-5 C-4 C-4 & H-11 C-6 G-11 C-1 C-9
BIDIRECTIONAL

FLUID STORAGE RESERVOIRS

416D and 424D Backhoe Loader Hydraulic System

BB

VENTED

PRESSURIZED

RETURN ABOVE FLUID LEVEL

RETURN BELOW FLUID LEVEL

COMBINATION CONTROLS

CC
16

416D: BKG1-UP BFP1-UP B2D1-UP BGJ1-UP

424D: BGP1-UP BKR1-UP

SOLENOID

SOLENOID or MANUAL

SOLENOID and PILOT

SOLENOID and PILOT or MANUAL

SERVO

THERMAL

DETENT

MANUAL CONTROL SYMBOLS

PUSH-PULL LEVER

MANUAL SHUTOFF

GENERAL MANUAL

PUSH BUTTON

PEDAL

SPRING

PILOT CONTROL SYMBOLS

RELEASED PRESSURE REMOTE SUPPLY PRESSURE

16

EXTERNAL RETURN

INTERNAL RETURN

SIMPLIFIED

COMPLETE

INTERNAL SUPPLY PRESSURE

Hydraulic Pump (16), Pump Pressure Test Port (CC)

Hydraulic Pump (16), Signal Pressure Test Port (BB)

ACCUMULATORS

CROSSING AND JOINING LINES

HYDRAULIC AND PNEUMATIC CYLINDERS

SPRING LOADED

GAS CHARGED

LINES CROSSING

LINES JOINING

SINGLE ACTING

DOUBLE ACTING

HYDRAULIC PUMPS
FIXED DISPLACEMENT VARIABLE DISPLACEMENT NON-COMPENSATED

HYDRAULIC MOTORS
FIXED DISPLACEMENT VARIABLE DISPLACEMENT NON-COMPENSATED

INTERNAL PASSAGEWAYS
INFINITE POSITIONING THREE POSITION TWO POSITION

UNIDIRECTIONAL

UNIDIRECTIONAL
CROSS FLOW

BIDIRECTIONAL

FLOW IN ONE DIRECTION

PARALLEL FLOW

FLOW ALLOWED IN EITHER DIRECTION

Volume 2: Single Tilt Loader with Side Shift Backhoe

2005 Caterpillar All Rights Reserved

Printed in U.S.A.

Electrical Symbols Table

Hydraulic Symbols (Electrical)

17 15 10 6 45
Transducer (Fluid) Transducer (Gas / Air)

G
Generator

13 5 1
Pressure Switch Pressure Switch (Adjustable) Temperature Switch Electrical Wire

44

AA

Pressure Symbol

Temperature Symbol

Level Symbol

Flow Symbol

All Wheel Steer 214-5097 Ride Control 162-3960 131-9203 243-2266 222-1684

Wire Number Identification Codes Electrical Schematic Example

Current Standard

Hydraulic Schematic Example

Current Standard

8 2 19 20 21 22 26 27 29 30 31 32 33 34 35 37 38 43 49 50 51 53 54 55 58 11 12 39 41 42 60 61 62 14 16 3 17 23 24 25 28 36 48 52 56 4 9 59 46

Harness identification code This example indicates wire 135 in harness "AG".

Wire Circuit Number Identification Wire Color

Valve Group - Stabilizer, 2 Bank (42), Pilot Oil Pressure Test Port (AA)
Circuit Identification Number

325-AG135 PK-14 325-PK

Wire Color Wire Gauge

Tap Locations Pressure, Sampling, and Sensor

Tap Number
AA BB CC

Previous Standard
Wire Wire Color

Description
Pilot Pressure Test Port Signal Pressure Test Port Pump Pressure Test Port

Schematic Location
H-8 C-12 A-12

325-PK-14
B A

Machine Component Locations

Circuit Number Identification

Wire Gauge
(EXAMPLE VALVE)

20 Page, RBM

Electrical Symbols (Electrical)

RENR3586-03 VOL 2

Electric Motor

15

14

13

12

11

10

CYLINDER GP- STABILIZER 173-4565

I

CYLINDER GP- STABILIZER 173-4565

I

VALVE GP- RELIEF 9T-0704

COVER GP- OUTLET STEER PRIORITY 191-4010

VALVE GP- CONTROL STABILIZER 222-0364

VALVE GP- CONTROL STABILIZER 222-0364

FILTER GP 210-6243

VALVE GP- CONTROL AUX 124-8818

AA
CYLINDER GP- MP BUCKET 185-1839 VALVE GP- P RELIEF A 9T-0704

CYLINDER GP- TILT 206-3553 CYLINDER GP- STEER 167-4235 PUMP GP- METERING HMU 238-8550 CYLINDER GP- STEER, AWD 214-5097 VALVE GP- CONTROL TILT 168-0361 T1

VALVE GP- MOUNTING (416D) - 243-2266 (424D) - 222-1684 ACCUMULATOR GPRIDE CONTROL 162-3960 CYLINDER GP- (ST) LIFT 206-3549 230-0979 H ACC

VALVE GP- REDUCING PRESSURE, STABILIZER 239-2226 VALVE GP- CONTROL STABILIZER 185-5898, 2 BANK

VALVE GP- CONTROL LIFT 130-6520

S T R CYLINDER GP- SWING 228-3506 PS SWITCH AS- PRESSURE 131-9203 COVER GP200-0161, INLET 202-2236, INLET, WITH TUV VALVE GP- SOLENOID 179-5593 S1 COOLER GP154-3799 VALVE GP- CONTROL STEER PRIORITY 188-7471 185-5906, 2 BANK LOADER 185-5907, 3 BANK LOADER VALVE GPRELIEF 6E-6285 VALVE GP- RELIEF 137-9466 CYLINDER GP- BOOM 206-3628 CYLINDER GP- SWING 228-3507 VALVE GP- CUSHION CROSSOVER RELIEF 206-3685 CYLINDER GP206-0514, BUCKET STD 206-0518, E STICK BUCKET CYLINDER GP- STICK 235-9831 CYLINDER GP- E STICK 191-7725

RENR3586-03 VOL 2

VALVE GP- P RELIEF A 187-0524

VALVE GP- P RELIEF 9T-0704

VALVE GPSOLENOID 3E-8622

20 Page, Color 2, RBM

PUMP GP- PISTON (416D) - 245-8998 (424D) - 235-4108

BB

TANK GP- HYDRAULIC 240-9721

VALVE GP- P RELIEF A 6E-6284 T VALVE GP- CONTROL AUX 190-3450 VALVE GP- CONTROL BOOM 190-3431 VALVE GP- CONTROL SWING 166-7950 VALVE GPBACK HOE 185-5903, 185-5904, 185-5905, 203-5483, 203-5484, 203-5485, CONTROL 4 5 6 4 5 6

VALVE GP- P RELIEF A 187-0527

VALVE GP- CONTROL BUCKET 190-3428

VALVE GP- P RELIEF A 6E-6281

VALVE GP- CONTROL STICK 190-3430

VALVE GP- CONTROL E STICK 190-3450

COVER GP- OUTLET 193-9189

LINE PATTERNS
Pressure Line Pilot / Load Sensing Pressure

CC

Drain / Return Lines Component Group Attachment Air Line

BANK WITHOUT TUV BANK WITHOUT TUV BANK WITHOUT TUV BANK BANK BANK

HYDRAULIC CIRCUIT COLOR DESCRIPTIONS

Main Pump Output Load Sense Circuit Supply Line Drain / Return Line Hand Metering Unit Control Circuit Lift Cylinder Control Circuit Auxiliary Control Circuit Tilt Cylinder Control Circuit Bucket Cylinder Control Circuit Boom Cylinder Control Circuit Swing Cylinder Control Circuit Bucket / E-Stick Control Circuit
Stick Cylinder Control Circuit Stabilizer Cylinder Control Circuit Stabilizer Cylinder Control Circuit

CALLOUTS
YY

THIS SCHEMATIC IS FOR THE 416D and 424D

SINGLE TILT LOADER WITH SIDE SHIFT BACKHOE (VOLUME 2)

Taps (Pressure, Sampling,Sensor) by letter Components by number

Part #: 201-6837
Components are shown installed on a fully operable machine with the key and engine off and transmission shifter in neutral.
2 1

52

E-Stick Cylinder Control Circuit

15

14

13

12

11

10