Poultry Housing

*(This is not in your syllabus, but important from the examination point of view and practical field life)*

Need for poultry house

 To protect birds from adverse climatic conditions

 To ensure easy and economic operation
 To ensure scientific feeding in a controlled manner
 To facilitate proper micro-climatic conditions in a near vicinity of bird
 For effective disease control measures
 To ensure proper supervision
Selection of location

 Poultry house should be located away from residential and industrial area.
 It should have proper road facilities.
 It should have the basic need like water and electricity.
 Availability of farm labourers at relatively cheaper wages.
 Poultry house should be located in an elevated area and there should not be any water-logging.
 It should have proper ventilation.

Layout of poultry farm

A small size poultry farm doesn’t require any special layout as it involves construction of only one
house. The medium and large size farms require special considerations for placement of building in the
farm premises. The basic principles to be observed for layout are:

 Layout should not allow visitors or outside vehicles near the birds.
 The sheds should be so located that the fresh air first passes through the brooder shed, followed
by grower and layer sheds. This prevents the spread of diseases from layer houses to brooder
house.
 There should be a minimum distance of 50-100 feet between chick and grower shed and the
distance between grower and layer sheds should be of minimum 100 metre.
 The egg store room, office room and the feed store room should be located near entrance to
minimize the movement of people around the poultry sheds.
 The disposal pit and sick room should be constructed only at the extreme end of the site.

Different types of poultry houses

 Brooder / chick house-It is used to brood and rear egg-type chicks from 0 to 8 weeks of age.
 Grower house-It is used to grow egg-type birds from 9 to 18 weeks of age.
 Brooders cum grower house-Here, the birds are reared from 0 to 18 weeks of age (entire
brooding and growing period of egg-type chicken).
 Layer house-In which birds over 18 weeks of age are reared, usually up to 72 weeks of age.
 Broiler house-In which broilers are reared up to 6 weeks of age.
 Breeder house-In which both male and female breeders are maintained at appropriate sex ratio.
 Environmentally controlled (EC) house- In which; entire environment is manipulated in such a
way that is optimum for the birds growth.
Optimal environmental conditions for rearing broilers
Temperature - 22-30⁰ C (70-85⁰ F)
Relative Humidity - 30-60 %
Ammonia level - Less than 25 ppm
Litter moisture - 15-25%
Air flow - 10-30 metres/minute

House Orientation (Direction)

The poultry house should be located in such a way that long axis is in east-west direction. This will
prevent the direct sunshine over the birds.

Size
Each broiler require one square foot of floor space while a layer requires two square feet of floor space
under deep-litter system of rearing. So the size of the house depends on the number of birds to be
reared.

Length
The length of the house can be of any extent. The number of birds reared and availability of the land
determines the length of poultry house.

Width
The open sided poultry houses in tropical countries should have a width not more than 22 to 25 feet in
order to allow ample ventilation and aeration at the mid-portion. Sheds wider than this will not provide
adequate ventilation during the hot weather. If the width of the shed is more than 25 feet, ridge
ventilation at the middle line of the roof top with proper overhang is a must. Hot air and obnoxious
gases which are lighter than air move upward and escape through ridge ventilation. In environmentally
controlled poultry houses, the width of the house may be even 40 feet or more since the ventilation is
controlled with the help of different type's fans.

Height
The height of the sides from foundation to the roof line should be 6 to 7 feet (eaves height) and at the
center 10 to 12 feet. In case of cage houses, the height is decided by the type of cage arrangements (3
tiers or 4 tiers).

Foundation
Good foundation is essential to prevent seepage of water into the poultry sheds. The foundation of the
house should of concrete with 1 to 1.5 feet below the surface and 1 to 1.5 feet above the ground level.

Floor
The floor should be made of concrete with rat proof device and free from dampness. The floor of the
house should be extended 1.5 feet outside the wall on all sides to prevent rat and snake problems.

Doors
The door must be open outside in case of deep-litter poultry houses. The size of door is preferably 6 x
2.5 feet. At the entry, a foot bath should be constructed to fill with a disinfectant.
Side walls
The side wall should be of 1-1.5 feet height, and generally at the level of bird’s back height. This side
wall protects the bird during rainy days or chill climate and also provides sufficient ventilation. In case
of cage houses, no side wall is needed.

Roof
The roof of the poultry house may be thatched, tiled, asbestos or concrete one depending upon the cost
involvement. Different types of roofs are Shed, Gable, half-monitor, full-monitor (Monitor), Flat
concrete, Gambrel, Gothic etc. Gable type is mostly preferred in tropical countries like India.

Overhang
The overhang of the roof should not be less than 3.5 feet in order to prevent the entry of rain water into
the shed.

Lighting
Light should be provided at 7-8 feet above the ground level and must be hanged from ceiling. If
incandescent bulbs are used, the interval between two bulbs is 10 feet. In case of fluorescent lights
(tube lights) the interval is 15 feet.

Systems of Poultry Housing

Poultry can be housed under different systems based on following factors,

1. Availability of land
2. Cost of land
3. Type of farming activity
4. Climatic condition
5. Labour availability
Broadly, poultry housing systems are classified into three systems:

1. Free range or extensive system

2. Semi-intensive system
3. Intensive system
1. Deep-litter system
2. Slatted floor system
3. Slat cum litter system
4. Cage system
1) Free range system
This system is adopted only when adequate land is available to ensure desired stocking density by
avoiding overcrowding. We can rear about 250 adult birds per hectare. A range provides shelter,
greens, feed, water and shade. Foraging is the major source of feeding for birds. Shelter is usually
provided by temporary roofing supported by ordinary poles. The fields are generally used on
rotational basis after harvesting of crops by moving of birds from one field to another depending on
cropping programme. All categories of birds can be reared in this system. This system is most
preferred for organic egg production.
Advantages

 Less capital investment

 Cost of housing is least.
 Feed requirements are less since birds can consume fairly good amount of feed from grass land.
 Fertility of soil can be maintained.

Disadvantages

 The scientific management practices cannot be adopted.

 Eggs are lost when laid inside the dense grasses unless special nests are provided.
 Losses due to predatory animals are more.
 Wild birds may bring diseases unless proper care is taken.

2) Semi-intensive system
As the name indicates birds are half-way reared in houses and half-way on ground or range, i.e. birds
are confined to houses in night or as per need and they are also given access to runs. The houses are
with solid floors while runs are fields only. The success of rearing depends on maintenance of
condition of runs to reduce the contamination. Runs can also be used on turn basis. The stocking
density rate on an average for adult birds is 750 per hectare. This system is usually adopted for duck
rearing. The feeding and watering facilities are provided in the pen.

Advantages

 More economical use of land compared to free range system

 Protection of birds from extreme climatic conditions
 Control over scientific operation is some extent possible
Disadvantages

 High cost for fencing.

 Need for routine cleaning and removal of litter material from the pen.

3) Intensive system
Birds are totally confined to houses either on ground / floor or on wire-netting floor in cages or on
slats. It is the most efficient, convenient and economical system for modern poultry production with
huge numbers.

Advantages

 Minimum land is required for farming.

 Farms can be located near market area.
 Day-to-day management is easier.
 The production performance is higher as more energy is saved due to restricted movements.
 Scientific management practices like breeding, feeding, medication, culling etc. can be applied
easily and accurately.
 The sick birds can be detected, isolated and treated easily.
Disadvantages

 Birds’ welfare is affected. They cannot perform the natural behaviour like roosting, spreading
wings, scratching the floor with legs etc.
 Since they are not exposed to outside sunlight and feed sources, all the nutrients should be
provided in balanced manner to avoid nutritionally deficient diseases.
 Chances for spreading of diseases are more.

Deep Litter System

In this system the birds are kept inside the house all the time. Arrangement for feed, water and nest are
made inside the house. The birds are kept on suitable litter material of about 3” to 5” depth. The word
litter is used for fresh litter material spread on the floor. Usually paddy husk, saw dust, ground nut hulls,
chopped paddy straw or wood shavings are used as litter materials. This arrangement saves labour
involved in frequent cleaning of faecal matter (droppings), however it needs periodical stirring. The litter
is spread on the floor in layers of 2” height every fortnightly till the required is achieved.

Advantages

 Vit B2 and Vit B12 are made available to birds from the litter material by the bacterial action.
 The welfare of birds is maintained to some extend
 The deep litter manure is a useful fertilizer.
 Lesser nuisance from flies when compared to cage system.

Disadvantages

 Because of the direct contact between bird and litter, bacterial and parasitic disease may be a
problem.
 Respiratory problems may emerge due to dust from the litter.
 The cost of litter is an additional expenditure on production cost.
 Faults in ventilation can have more serious consequences than in the cage system
The built up litter
Deep litter or built up litter is accumulation and decomposition of litter material and excreta until it
reaches a depth of 8” to 12”, after an original start of 3” to 5” depth. Bacterial action decomposes litter
and excreta into crumble form and heat is produced during decomposition which keeps litter dry and
warm. If the amount of droppings exceeds the litter, fresh litter will be added to lower the amount of
droppings. Periodical stirring of the litter should be carried out for an effective functioning of built-up
litter. After one year, the litter is changed and the decomposed litter is used as good quality
manure. The best built-up litter should be dry, friable and free from obnoxious odour.

Slatted (Slotted) Floor System

In a slatted floor, iron rods or wood reapers are used as floor, usually 2-3 feet above the ground level to
facilitate fall of droppings through slats. Wooden reapers or iron rods of 2” diameter can be used on
lengthwise of the house with interspaces of 1” between rods.

Advantages

 Less floor space per bird is needed when compared to solid floor system.
 Bedding is eliminated
 Manure handling is avoided
 Increased sanitation
 Saving in labour
 Soil borne infection is controlled

Disadvantages

 Higher initial cost than conventional solid floors

 Less flexibility in the use of the building
 Any spilled feed is lost through the slots
 More fly problem.

Slat (Slot) Cum Litter System

This system is commonly practiced for rearing birds for hatching eggs production, particularly meat-type
breeders. Here, a part of the floor area is covered with slats. Usually, 60% of the floor area is covered
with slats and rest with litter. Feeders and waters are arranged in both slat and litter area. In case of
breeder flock, nest boxes are usually kept on litter area.

Advantages

 More eggs can be produced per unit of floor space than all solid floors.
 Fertility is better with the slat cum litter house than with the all-slat house.

Disadvantages

 Housing investment is higher with the slat cum litter house than with the all-litter house.
 The separation of birds from the manure beneath the slats commonly results in fly
problems.
Cage System
This system involves rearing of poultry on raised wire netting floor in smaller compartments, called
cages, either fitted with stands on floor of house or hanged from the roof. It has been proved very
efficient for laying operations, right from day-old to till disposal. At present, 75% of commercial layers
in the world are kept in cages. Feeders and waterers are attached to cages from outside except nipple
waterers, for which pipeline is installed through or above cages. Auto-operated feeding trolleys and egg
collection belts can also be used in this rearing system. The droppings are either collected in trays
underneath cages or on belts or on the floor or deep pit under cages, depending on type of cages.

Advantages

 Minimum floor space is needed

 More number of eggs per hen can be received
 Less feed wastage
 Better feed efficiency
 Protection from internal parasites and soil borne illnesses
 Sick and unproductive birds can be easily identified and eliminated.
 Clean eggs production
 Vices like egg eating, pecking is minimal.
 Broodiness is minimal
 No need of litter material
 Artificial Insemination (AI) can be adopted.

Disadvantages

 High initial investment cost.

 Handling of manure may be problem. Generally, flies become a greater nuisance.
 The incidence of blood spots in egg is more
 Problem of cage layer fatigue. (It is a condition, in which laying birds in cages develop
lameness. It may be due to Ca and P deficiency but the exact reason is not known)
 In case of broilers, incidence of breast blisters is more, especially when the broilers weight is
more than 1.5 kg.
Types of cages
Based on the number of birds in a cage, it is classified as
 Single or individual bird cage (Only one bird in a cage)
 Multiple bird cage (From 2 to 10 birds, usually 3 or 4 birds per cage)
 Colony cages (Holding birds more than 11 per cage)
Based on the number of rows
 Single-deck
 Double-deck
 Triple-deck
 Four-deck
 Flat-deck

Based on arrangement of cages

1) Stair-step cages

a) M-type cages
b) L-type cages
2) Battery cages (Vertical cages)

Based on the type of bird reared

1. Brooder / chick cages

2. Grower cages
3. Layer cages
4. Breeder cages
Broiler cages
1) Brooder cage / chick cage

Brooder cage

Specifications: Front feeding length : 60 inch

Front & Back height : 12 inch
Depth : 36 inch
No. of chicks (0-8 weeks) accommodated per box : 60

Chick cages are arranged either as single deck or double deck system. The feeders and waterers are
arranged on outside. Now-a-days nipple drinker system is followed from day-old itself. Newspaper
may be spread over the cage floor for first 7 or 10 days. Feed is usually provided inside the cage during
the first week of age.
2) Grower cage

Grower cage Grower cage

Specifications: Front feeding length : 30 inch

Front & Back height : 15 inch
Depth : 18 inch
No. of growers (9 to 18 weeks) accommodated per box : 10

3) Layer cage
Two types of stair-step layer cages are commonly used in open-sided poultry houses

1. Conventional cages
2. Reverse cages (Californian cages)
a) Conventional cage

Specifications for each box: Front feeding length : 15 inch

Front height : 18 inch
Back height : 15 inch
Depth : 18 inch
b).Reverse cages
Specifications for each box: Front feeding length : 18 inch
Front height : 18 inch
Back height : 15 inch
Depth : 15 inch
These cages can hold 3 to 4 birds. They are arranged either in 2-tier or 3-tier. A slope of 1/6 is provided
in Conventional cages, where as in reverse cages the slope is 1/5.

Advantages of reverse cages over conventional cages

1. More feeding space is available in reverse cages. So, all 4 birds can take feed at a time, where as
in conventional cages, 3 birds can take feed and the other one is waiting at the back.
2. Number of cracked eggs is less due to lesser rolling distance.
3. Better ventilation in reverse cages than conventional cages.

Elevated cage layer house

The height of the shed is raised by 6-7 feet using concrete pillars. The distance between two pillars is 10
feet. Two feet wide concrete platforms are made over the pillars. When 3 ‘M’ type cages are arranged 4
platforms are needed. In case of 2 ‘M’ and 2 ‘L’ type cages are arranged 3 platforms are needed. When
constructing platforms projecting angles or iron rods to be provided to fix the cages. The inter-platform
distance is 6-7 feet depending upon the type of the cages used. The total height of the house is 20-25
feet and the width is 30-33 feet. This type of houses provides sufficient ventilation in tropical countries.

Floor space requirements

Type Age (in weeks) Deep-litter (sq. ft.) Cages (sq. ft.)
0-8 0.60 0.20
Egg-type chicken 9-18 1.25 0.30
>18 1.50 0.50
0-4 0.30 -
Meat-type chicken
4-8 0.75 -