ENGINEERED BY AR-2

208 Mid power and high directivity,

2 - way, Line array unit
SPIRATECH TM
Series

Description :

The AR-208 enclosure is part of a Series of systems,

which allows the assembly of different Line Arrays.
As with all the other components in this Series, it has
been conceived to offer very high sonic performance, out-
standing presence and extreme clarity, while meeting each
and every one of the parameters that define the Line Array
Technology.
The various elements found in the enclosure make use
of sophisticated loudspeaker coupling techniques in order to
implement the appropriate shading, thus permitting total
control of the horizontal dispersion and avoiding the cancel-
lations inherent to conventional P.A. Systems.
Furthermore, the use of complex wave-guides, permits
an absolute control over the vertical coverage, an utmost
necessity when directing our sonic energy to specific areas.
The end result is a clear message without bouncing or
Specifications and characteristics
reflected specific frequencies.
The necessary Vertical Coverage is obtained via the Frequency Response (Hz) ±3 dB (1 x AR208) 125Hz - 18kHz
system’s enclosures separation and angle setting between ±3 dB (6 x AR208) 80Hz - 18kHz
the same. Horizontal coverage angle (-6dB) 110 deg. nominal (250Hz - 18kHz)
The full Line Array system will produce a coherent wave Vertical coverage angle (-6dB) Variable, configuration dependant
front which provides the interesting peculiarity of only loos-
Typical with 6 cabinets (0º Splay) 30 deg. nominal
ing 3dB every time we double the distance from the sound
source. Conventional systems loose 6 dB in the same cir- Sensitivity 1 x AR208 (dB/2,83V@1m) 100 dB
cumstances. This Line Array inherent advantage permits Sensitivity 6 x AR208 (dB/2,83V@1m) 116 dB
large SPL at long distances while offering bearable levels in SPL Max / Peak (dB SPL@1m) 1 x AR208 131 dB
the near field. 6 x AR208 147 dB
Another noticeable point is the easy set up procedure, Impedance 16 Ohm
thanks to our rugged and reliable flying assembly that per-
mits a precise yet rapid installation. Recommended signal processor RAM Audio LMS 244 Digital Processor

Constructive elements
Applications :
Mid frequency 2 x 200 mm (8”) transducers
This powerful and highly modular system offers great
directivity and flexibility. Therefore it can be used to sound with 50 mm (2”) coil
small events up from one thousand listeners to large con- 300W AES(150W AES per unit)
certs in open spaces. It meets the standards of the SLAS, High frequency 1 x Compresion driver 50 mm, (2”) coil,
(Scalable Line Array System), which adapts easily and can 25 mm (1”) throat
be used successfully in the most diverse tasks.
100W AES
Although the system has been designed to cover short
distances, (Short Throw), it can, just by adding medium to
long distance units from the same series, (AR-210), become Enclosure & suspension Hardware
a full coverage P.A. for medium to large events.
The minimum configuration consists of six AR-208, the Enclosure Horizontal parallelepiped construction
full advantage of a Line Array rig is reached with nine units.
15mm Baltic cross ply, tongue and groove
The SpiraTech enclosures, conceived as fully opera-
tional Line Array devices, offer a series of specific charac- assembly and outer frame. Bi-component
teristics: epoxy finish
-Continuous and coherent wave front Protection grill 1.5mm laminated steel with textured epoxy
-Pattern Control finish
-Uniform SPL Enclosure protections Skids on all resting surfaces
-High resolution sound reproduction
-Configurable and predictable coverage Connectors Two Neutrik NL8 connectors on steel back
-Minimal signal process and settings plate
Dimensions (H x W x D) 504 x 240 x 409 mm (19.8 x 9.5 x 16.1
The recommended applications include: inches)
-Auditoria Net weight 18.8 Kg (41 Pounds) including inserted
-Stadia
rigging system
-Concert Halls
-Convention Centres Rigging system Self-contained, integrated Rigging system
-Theatres with no protruding or loose parts for ease
-Open-air concerts and general events of transport and assembly.
-Large Ballrooms Designed to rig and fly up to 24 enclosures
with a 1:5 design factor.

1/3
AR-2
208 Mid power and high directivity, 2-way, line array unit

Global normalized response (Single cabinet) Vertical coverage (Single cabinet)

Horizontal coverage (Typical array) Vertical coverage (Two cabinets @ 10º)

Acoustic response measuring system

The Acoustic Measures of this Line Array Unit have been made taking
into account its use context, this is as an individual cabinet to be part of a
Line Array Assembly.
The measure of Frequency Response is that of a single AR-208 enclo-
sure with our recommended, and in the case of our RAM Audio LMS 244,
preset, controller settings for crossover, levels and EQ as defined in our
accompanying software.
The Vertical Coverage shown in the graphs, from one to eight AR-208,
corresponds to a given system with a Splay angle of 10 degrees between
adjacent enclosures, except for the one specified at 0 degree which corre- Vertical coverage (Four cabinets @ 10º)
sponds to a Vertical Line Array with 0 degree Splay angle.
All measures have been taken according to the Gathered Technique with
a calibrated microphone centred on the enclosure or Array axis. The polar
pattern data are taken symmetrically with respect to the reference axis, at 5
degree intervals, from 0 to 355º, using an LMS digital measuring system.

Vertical coverage (Six cabinets @ 10º)

Dimensions: 504mm(W) x 409mm(D) x 240mm(H)

Vertical coverage (Six cabinets @ 0º)

2/3
AR-2
208 Mid power and high directivity, 2-way, line array unit
SPIRATECHTM ARRAYS
The configurable Arrays obtained with the AR-208 are scalable systems, (SLAS), easily and rapidly
adapted to any particular need. They follow the theory of the spiral Line Arrays. The enclosures have to
be flown vertically and oriented according to the coverage required and always as a multi-enclosure
system.
The 110º Horizontal coverage is constantly maintained, regardless of the Splay between the units
and their amount, directly proportional to the Vertical Coverage required.
The Vertical Coverage needed, as well as the SPL, are obtained through preset Splay angulations,
while the array is assembled on the ground and depend on the number of AR-208 enclosures used.
Our very user friendly flying fixtures permit choosing the Splay angles between 0 and 10 degrees
according to the simulation program and avoids the disagreeable chore of having to do so simultane-
ously to lifting the cabinets.
Up to twenty AR-208 can be flown from the supporting frame TF-208.The Interface Frame IF-208
permits as well to fly under the main system AR-210 smaller Line Array units, (AR-208), much more
efficient and predictable than any ground stacked front-fill. These enclosures have a greater Horizontal
Coverage of 110º to achieve a perfect near field presence.

TF-208 Assembly Top Frame

Designed to support up to twenty AR-208, the frame is made of laser cut steel, with an epoxy finish.
It lifts the suspended Line Array from one or two anchoring points.

IF-208 Assembly Interface Frame

Built from laser cut steel, this frame serves the purpose of assembling the Mid size high directivity
3-way AR-210 to build a medium-large Spiratech Line Array with the AR-210 for long throw and the AR-
208 for short throw.

FC-208 Transport Flight-case

This convenient flight-case safely transport six cabinets interconnected with their corresponding rig-
ging pins. It serves as well as rigging platform, one the covers removed, the whole assembly rolling
towards the liftings support .

FC-Tf208 Assembly Frames, Transport Flight-case

This rigid, ergonomic and practical transport flight-case accepts two double sets of top frames.It has
also a compartment for cabling. All inner surfaces are lined with high-density polyurethane foam and
divided so that every element is individually protected.

C.E. STUDIO 2 S.L.

P.I. La Lloma, c/ Sierra Perenchiza 28
46960 Aldaya - Valencia - Spain
Phone: +34 96 1273054
Fax: +34 96 1273056
http://www.spaceequipmentaudio.com
e-mail: [email protected]

3/3