Tac/Com II™ Control Heads Custom Configuration Chart

Control Head Part Number Sequence:

A control head can have as many radio interfaces as defined in the physical type (2, 3, or 4). Specify the order in which they
appear (from top to bottom). In the part number, the first line of display at the top of the control is the first letter in the radio
definition portion of the part number. This is repeated for the second display line with the second letter designation and continues
for the number of available interfaces. NAT will pre-program the control head at the time of order for no charge. See page 7-5
for available options. The control head part number defines 4 key parameters:

Series Control Head Type Filter and Lights Radio Interfaces

TH 250 to 460 1 to 14 A to Z
For example TH 350 2 NJN
3 radio controller polarized filter, NT30B, NTX138-100,
28 VDC lighting NT450

TH250 (Master) TH260 (Slave)

TH450A (Master)

OR

TH350 (Master) TH360 (Slave)

TH450B (Master)

OR

TH450 (Master) TH460 (Slave) TH460B (Slave)

Control Head Type: ................................................................ Lighting Voltage: .....................................................................

(TH250, 350, 450, 450A, 450B) (5 or 28 VDC)
Radio - Position #1: ....................................... w/Guard Y / N Lighting Color: ........................................................................
(White, Blue/White, NVG)
Radio - Position #2: ....................................... w/Guard Y / N
(Indicate “Blank” if future expansion expected) Display Filter: ..........................................................................
(Polarized scratch resistant plastic, Circular polarized glass)
Radio - Position #3:: ...................................... w/Guard Y / N
�������������������������������������� (Indicate “Blank” if future expansion expected) Slave Control Required?: . .....................................................

Radio - Position #4: : ..................................... w/Guard Y / N DP12, DTE12, or TE12 Required?: ......................................
�������������������������������������� (Indicate “Blank” if future expansion expected) (Indicate if for Master, Slave or both)

Tac/Com II™ Control Heads
Part Number Specifications
I. Type Control Features I. Type Control Features
250 Master Two Radio, 3.0” 260 Slave Two Radio, 3.0”
350 Master Three Radio, 3.0” 360 Slave Three Radio, 3.0”
450 Master Four Radio, 4.875” 460 Slave Four Radio, 4.875”
450A Master, Slim Line Four Radio, 3.75” 460B Slave, Slim Line Four Radio, 3.375”
450B Master, Slim Line Four Radio, 3.375”
II. Filter & Lights Display Filter Type Lighting
-1 High contrast, scratch resistant, polarized 28 Vdc NVG Friendly Green
-2 High contrast, scratch resistant, polarized 28 Vdc Natural
-4 High contrast, scratch resistant, polarized 5 Vdc Natural
-5 High contrast, scratch resistant, polarized 5 Vdc NVG Friendly Green
-6 High contrast, scratch resistant, polarized 28 Vdc Blue/White
-7 Daylight, circular polarized glass filter 28 Vdc Natural
-8 Daylight, circular polarized glass filter 5 Vdc Blue/White
-9 Deep Red filter (Red LED display) 28 Vdc Natural
-11 Daylight, circular polarized glass filter 5 Vdc NVG Friendly Green
-12 Daylight, circular polarized glass filter 28 Vdc NVG Friendly Green
-13 Daylight, circular polarized glass filter 5 Vdc Natural
-14 High contrast, scratch resistant, polarized 5 Vdc Blue/White
-15 Daylight, circular polarized glass filter 28 Vdc Blue/White
-16 Daylight, circular polarized glass filter 28 Vdc, NVIS Green B
-17 Daylight, circular polarized glass filter 5 Vdc NVIS Green B
III. Interface Radio Type Control Functions Control Groups Connectors
A ARINC 2x5 VHF AM Comm (Note 1) F,T,V One One
B BLANK Blank/No Controls One None
C FLITEFONE 40 F,R,T,V One One
D Motorola Astro/XTL™5000 Series F,R,S,T,V One One
D1 Motorola Astro/XTL™5000 w/zone F,R,S,T,V,Z Two One
E NT-Slot, Controls Only, No Card F,R,S,T,V One One (Empty)
F FLEXCOMM F,R,T,V One One
G FLEX Slot, Controls Only, No Card F,R,T,V One One (Empty)
H NTX - Series with Guard Receiver F,G,R,S,T,V Two One
J NAT Tac/Com NTX - Series F,R,S,T,V One One
J1 Chelton 805-1, 905-2, 915-1 (Note 4) F,R,T,V Two One
K MIDLAND SYNTECH XTR (Note 2,3) F,R,S,T,V One One
L Motorola Spectra F,R,S,T,V One One
L1 Motorola Spectra with Zone Function F,R,S,T,V,Z Two One
N NAT Tac/Com NT-Series F,R,S,T,V One One
P RT9600/7200 Single Connector F,R,T,V One One
Q RT9600/7200 W/Tones, No Guard Ctls C,F,R,T,V One Two
R RT9600/7200 Plug Compatible F,R,T,V One Two
S MOTOROLA URC-200 (Note 4) E,F,R,S,T,V Two One
T TRANSCRYPT NT-Series E,F,R,S,T,V Two One
U RT9600/7200 with Guard Receiver C,F,G,R,T,V Two Two
V NT Series with Guard Receiver F,G,R,S,T,V Two One
Y Serial I/O Expansion Port (Note 5) None None One

(Note 1): Not recommended for use as a primary IFR comm (Control not TSO’d).
(Note 2): Requires external MI34 adaptor for proper operation.
(Note 3): Not for Syntech II.
(Note 4): Contact NAT.
(Note 5): “Y” card required when using a remote slave and DP12/DTE12 from the same controller.

Functions: C = Internal CTCSS Tone Generation G = Individual Guard Volume T = TX LED (Green)
E = Encryption R = RX LED (Amber) V = Vol., ON/OFF Switch
F = Function Switch S = Scanning Z = Zone Switch