BOP Plate Load Test Cert. DILJITH 1 NOV-20

ALMANSOORI INSPECTION SERVICES
LIFTING EQUIPMENT THOROUGH EXAMINATION REPORT

This report complies with the requirements of the Lifting Operations and Lifting Equipment Regulations 1998
Report Number: 5020006338-001 Date of Report: 01-Nov-2020

Job Allocation No: 5020006338 Type of Inspection: Proof Load test & MPI
Name and Address of Owner Place of Inspection Sub location
Cameron MIS Yard MIS Yard
Due Date of Next Date of Last Proof Due Date of Date of Last
Date of Inspection
Inspection Load Test Next Proof Load Test Inspection
01-Nov-2020 31-Oct-2021 01-Nov-2020 31-Oct-2023 Unknown
Safe Working Proof Load
Owner ID Description of Lifting Equipment Qty. Load Applied
(Specify Units) (Specify Units)
RGR 4802544-18A
(4511286142-10-002) BOP Lifting Plates 50 t 62.5 t
Each Plate Each Plate
RGR 4802544-18B 1
(4511286142-10-010) Pair Manufacture Year of
Size: 13-5/8” 10K Name Manufacturing
P/N: 2372942-22-80-11 Cameron Unknown
Rev.03
Applicable Reference Standards : API RP 7L
Applicable Reference Regulations: SWIM
Colour Code: Orange till the end of March, then Blue
NDT Details (if Any): Pre & Post Load test MPI Acceptable (5020006338-MPI-001)
Test Equipment Details: ACY-0096
Is this the first examination after installation or assembly at a new site or location? : Yes ☐ No ☒
If the answer to the above question is YES has the equipment been installed correctly? Yes☐ No☐ N/A ☒
Was the examination carried out Within an interval of 6 months? Yes☒ No☐
Was the examination carried out Within an interval of 12 months? Yes☐ No☒
Was the examination carried out In accordance with an examination scheme? Yes☒ No☐
Was the examination carried out After the occurrence of exceptional circumstances? Yes☐ No☒
Identification and description of defect ,if any of any part found to have a defect which is or
None
could become a danger to persons : (If none, state NONE)
Is the above an existing or imminent danger to persons? Note-This is a reportable defect Yes☐ No☒
Is the above a defect which is not yet but could become a danger to persons? Yes☐ No☒
(If YES State the day by) Date:
Particulars of any repair, renewal or alteration required to remedy the defect identified above:
Particulars of any tests carried out as part of the examination(If none state NONE) Proof Load test & MPI
IS THIS EQUIPMENT SAFE TO USE? Yes☒ No☐
Remarks (if Any) :
Inspected By Stamp QA/QC Stamp
Name: DILJITH DINESH
Qualification: NDT Level II
Signature:
Name and address of employer of persons making and authenticating this report:
AlMansoori Inspection Services ,P.O.Box: 109442 ,Abu Dhabi,UAE, Email:[email protected], Web: www.almansoori.biz
This certificate is granted subject to the condition that is understood and agreed that nothing herein contained shall be deemed to relieve any designer, manufacturer,
seller, repairer or operator of any warranty, expressed or implied and AlMansoori liability shall be limited to the wilful negligence or deliberate omissions of its
employees. Under no circumstances whatsoever, shall AlMansoori be liable for any injury or damage to any person occurring by reason of negligent operation or
any defect in materials, machinery, equipment or other items other than those defects ascertainable by normally accepted testing standards and only those items
actually inspected by AlMansoori and which are covered by this certificate.
F. 836
Rev. 03
28.11.2018
ALMANSOORI INSPECTION SERVICES
LIFTING EQUIPMENT THOROUGH EXAMINATION REPORT
This report complies with the requirements of the Lifting Operations and Lifting Equipment Regulations 1998
Report Number: 5020006338-002 Date of Report: 01-Nov-2020

Job Allocation No: 5020006338 Type of Inspection: Proof Load test & MPI
Name and Address of Owner Place of Inspection Sub location
Cameron MIS Yard MIS Yard
Due Date of Next Date of Last Proof Due Date of Date of Last
Date of Inspection
Inspection Load Test Next Proof Load Test Inspection
01-Nov-2020 31-Oct-2021 01-Nov-2020 31-Oct-2023 Unknown
Safe Working Proof Load
Owner ID Description of Lifting Equipment Qty. Load Applied
(Specify Units) (Specify Units)
RGR 4789127-1A
(4504146448-4-2) BOP Lifting Plates 50 t 62.5 t
Each Plate Each Plate
RGR 4789127-1B 1
(4504252479-01-01) Pair Manufacture Year of
Size: 13-5/8” 15K Name Manufacturing
P/N: 2246436-22-80-11 Cameron Unknown
Rev.01
Applicable Reference Standards : API RP 7L
Applicable Reference Regulations: SWIM
Colour Code: Orange till the end of March, then Blue
NDT Details (if Any): Pre & Post Load test MPI Acceptable (5020006338-MPI-002)
Test Equipment Details: ACY-0096
Is this the first examination after installation or assembly at a new site or location? : Yes ☐ No ☒
If the answer to the above question is YES has the equipment been installed correctly? Yes☐ No☐ N/A ☒
Was the examination carried out Within an interval of 6 months? Yes☒ No☐
Was the examination carried out Within an interval of 12 months? Yes☐ No☒
Was the examination carried out In accordance with an examination scheme? Yes☒ No☐
Was the examination carried out After the occurrence of exceptional circumstances? Yes☐ No☒
Identification and description of defect ,if any of any part found to have a defect which is or
None
could become a danger to persons : (If none, state NONE)
Is the above an existing or imminent danger to persons? Note-This is a reportable defect Yes☐ No☒
Is the above a defect which is not yet but could become a danger to persons? Yes☐ No☒
(If YES State the day by) Date:
Particulars of any repair, renewal or alteration required to remedy the defect identified above:
Particulars of any tests carried out as part of the examination(If none state NONE) Proof Load test & MPI
IS THIS EQUIPMENT SAFE TO USE? Yes☒ No☐
Remarks (if Any) :
Inspected By Stamp QA/QC Stamp
Name: DILJITH DINESH
Qualification: NDT Level II
Signature:
Name and address of employer of persons making and authenticating this report:
AlMansoori Inspection Services ,P.O.Box: 109442 ,Abu Dhabi,UAE, Email:[email protected], Web: www.almansoori.biz
This certificate is granted subject to the condition that is understood and agreed that nothing herein contained shall be deemed to relieve any designer, manufacturer,
seller, repairer or operator of any warranty, expressed or implied and AlMansoori liability shall be limited to the wilful negligence or deliberate omissions of its
employees. Under no circumstances whatsoever, shall AlMansoori be liable for any injury or damage to any person occurring by reason of negligent operation or
any defect in materials, machinery, equipment or other items other than those defects ascertainable by normally accepted testing standards and only those items
actually inspected by AlMansoori and which are covered by this certificate.
F. 836
Rev. 03
28.11.2018

BOP Plate Load Test Cert. DILJITH 1 NOV-20

Uploaded by

Copyright:

Available Formats

BOP Plate Load Test Cert. DILJITH 1 NOV-20

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BOP Plate Load Test Cert. DILJITH 1 NOV-20

Uploaded by

Copyright:

Available Formats

ALMANSOORI INSPECTION SERVICES

LIFTING EQUIPMENT THOROUGH EXAMINATION REPORT

Report Number: 5020006338-001 Date of Report: 01-Nov-2020

Report Number: 5020006338-002 Date of Report: 01-Nov-2020

You might also like