Cement & Sand Coefficient Calculation

Cement : Sand
Plastering in 1 : 4 , 20 mm Thickness

Consider 100 SQm of Surface area

Volume of Cement Mortar 2.000 Cum

Volume of Wet Mortar reqd 2.600 Cum

(Take 30% reduction in Vol)

Volume of Dry Mix Mortar reqd 3.250 Cum

(Take 25% reduction in Vol)
Say
3.250 Cum

Cement Required 1 Part 0.650 Cum for 100 SQm of Surface Area
ie., 936 Kgs
ie., 18.72 Bags

Sand Required 4 Part 2.600 Cum for 100 SQm of Surface Area

COEFFICIENT PER UNIT,

Cement 0.187 Bags

Sand 0.026 Cum
mm Thickness

SQm of Surface Area

SQm of Surface Area

 Theoretical Requirement Of Cement
S.No Description Cement Per

1 RR Masonry with CM 1:4 2.510 Cum

2 RR Masonry with CM 1:5 2.050 Cum
3 RR Masonry with CM 1:6 1.650 Cum
4 CR Masonry with CM 1:6 1.500 Cum
5 Brick Work in CM 1:4 1.900 Cum
6 Brick Work in CM 1:5 1.550 Cum
7 Brick Work in CM 1:6 1.350 Cum
8 Brick Work in CM 1:8 0.940 Cum
9 Half Brick Work in CM 1:3 0.286 Sqm
10 Half Brick Work in CM 1:4 0.212 Sqm
11 Half Brick Work in CM 1:5 0.156 Sqm
0 Half Brick Work in CM 1:6 0.138 Sqm

1 75mm thick Brick Work in CM 1:4 0.130 Sqm

2 75mm thick Brick Work in CM 1:3 0.162 Sqm
Projected Brick bands drip course etc.in CM 1:6 finished with 12 mm thick Cement Plaster 1:6
3 0.033 Rm
4 Half Brick Work honey combed in CM 1:3 0.172 Sqm
5 Half Brick Work honey combed in CM 1:4 0.128 Sqm

6 CC 1:5:10 2.600 Cum

7 CC 1:4:8 3.400 Cum
8 CC 1:3:6 4.460 Cum
9 CC 1:2:4 6.360 Cum
10 CC 1:1.5:3 8.000 Cum
11 CC 1:1:2 12.200 Cum

M15 Concrete 5.600 Cum

M20 Concrete 6.400 Cum
M25 Concrete 7.200 Cum
M30 Concrete 8.000 Cum

12 6 mm thick C.P 1:4 0.056 Sqm

13 6 mm thick C.P 1:3 0.074 Sqm
14 10 mm Thick C.P 1:5 0.074 Sqm
15 10 mm Thick C.P 1:4 0.086 Sqm
16 10 mm Thick C.P 1:3 0.114 Sqm
17 10 mm Thick C.P 1:6 0.060 Sqm
18 12 mm Thick C.P 1:3 0.147 Sqm
19 12 mm Thick C.P 1:4 0.109 Sqm
20 12 mm Thick C.P 1:6 0.072 Sqm
21 12 mm Thick C.P 1:5 0.089 Sqm
22 15 mm Thick C.P 1:3 0.175 Sqm
23 15 mm Thick C.P 1:4 0.131 Sqm
24 15 mm Thick C.P 1:5 0.107 Sqm
25 15 mm Thick C.P 1:6 0.088 Sqm
26 19 mm Thick C.P 1:4 0.156 Sqm
27 19 mm Thick C.P 1:6 0.112 Sqm
28 19 mm Thick C.P 1:8 0.086 Sqm
29 20 mm Thick C.P 1:3 0.228 Sqm
30 20 mm Thick C.P 1:4 0.170 Sqm
20 mm Thick C.P 1:5 0.140 Sqm
31 20 mm Thick C.P 1:6 0.112 Sqm
32 25 mm Thick C.P 1:6 0.146 Sqm
33 12 mm thick bearing plaster in CM 1:4 with neat cement finish 0.118 Sqm
34 Neat Cement Punning 0.040 Sqm
35 Flush or Ruled cut on Brick work with CM 1:3 0.031 Sqm
36 Flush or Ruled cut on Brick work with CM 1:2 0.040 Sqm
37 Raised and Cut Pointing on Brick work with CM 1:3 0.047 Sqm
38 Flush or ruled Pointing on Brick Flooring with CM 1:2 0.027 Sqm
39 Flush or ruled Pointing on Brick Flooring with CM 1:4 0.015 Sqm
40 Flush or ruled Pointing on Brick Flooring with CM 1:6 0.010 Sqm
41 Brick On Edge Flooring in CM 1:4 0.220 Sqm
42 Brick On Edge Flooring in CM 1:6 0.160 Sqm
43 25 mm thick IPS flooring in CC 1:2:4 with 12 mm chips finished with a floating coat of
cement 0.204 Sqm
44 40 mm thick IPS flooring in CC 1:2:4 with 20 mm metal finished with a floating coat of
cement 0.300 Sqm
45 25 mm thick IPS flooring with base coat 19 mm thick 1:2:4 with 10 mm metal and 6 mm
topping coat 1:1 with a floating coat of cement 0.274 Sqm
46 40 mm thick IPS flooring with base coat 30mm thick 1:2:4 with 10 mm metal and 10mm
topping coat 1:1 with a floating coat of cement 0.464 Sqm
47 30 mm thick IPS flooring with base coat 20mm thick 1:2:4 with 10 mm metal and 10mm
topping coat 1:1 with a floating coat of cement 0.371 Sqm
48 25 mm thick cast-in-situ grey terrazzo flooring, under layer 19mm thick cement concrete
1:2:4 with 10mm nominal size chips and 6mm thick topping laid in Cement marble powder
mix 3:1 by weight in proportion of 4:7 by volume 0.274 Sqm
49 40 mm thick cast-in-situ grey terrazzo flooring, under layer 30mm thick cement concrete
1:2:4 with 10mm nominal size chips and 10mm thick topping laid in Cement marble powder
mix 3:1 by weight in proportion of 4:7 by volume 0.315 Sqm
50 40 mm thick cast-in-situ grey terrazzo flooring, under layer 31mm thick cement concrete
1:2:4 with 10mm nominal size chips and 9mm thick topping laid in Cement marble powder
mix 3:1 by weight in proportion of 4:7 by volume
a) Dark or Light shade pigment with grey cement 0.317 Sqm
b) Light shade pigment or without any pigment with White Cement
Grey Cement 0.202 Sqm
White Cement 0.116 Sqm
51 40 mm thick cast-in-situ grey terrazzo flooring, under layer 28mm thick cement concrete
1:2:4 with 10mm nominal size chips and 12mm thick topping laid in Cement marble powder
mix 3:1 by weight in proportion of 2:3 by volume
a) Dark or Light shade pigment with grey cement 0.341 Sqm
b) Light shade pigment or without any pigment with White Cement
Grey Cement 0.179 Sqm
White Cement 0.162 Sqm
c) Medium shade pigment with 50% grey cement and 50% white cement
Grey Cement 0.260 Sqm
White Cement 0.081 Sqm
d) White Cement without any pigment
Grey Cement 0.179 Sqm
White Cement 0.162 Sqm
52 Terrazo Cast-In-Situ skirting and dado, top layer 6 mm thick marble chips laid in cement
marble powder mix 3:1 by weight in proportion of 4:7 by volume
A) 18mm thick with under layer 12 mm thickC.P 1:3
a) Dark or Light shade pigment with grey cement 0.298 Sqm
b) Light shade pigment or without any pigment with White Cement
Grey Cement 0.218 Sqm
White Cement 0.080 Sqm
c) Medium shade pigment with 50% grey cement and 50% white cement
Grey Cement 0.258 Sqm
White Cement 0.040 Sqm
B) 21mm thick with under layer 15 mm thickC.P 1:3
a) Dark or Light shade pigment with grey cement 0.328 Sqm
b) Light shade pigment or without any pigment with White Cement
Grey Cement 0.246 Sqm
White Cement 0.080 Sqm
c) Medium shade pigment with 50% grey cement and 50% white cement
Grey Cement 0.286 Sqm
White Cement 0.040 Sqm
53 Precast terrazo tiles 20mm thick with marble chipsof sizes upto 6mm in skirting or on walls,
laid on 12mm tk CP 1:3 jointed with neat cement slurry
a) Light shades using white cement
Grey Cement 0.235 Sqm
White Cement 0.044 Sqm
b) Medium shade pigment with 50% grey cement and 50% white cement
Grey Cement 0.257 Sqm
White Cement 0.022 Sqm
c) Dark or Light shade pigment with grey cement 0.279 Sqm
54 White glazed tile in flooring, skirting and dadoon 12 mm thick CP 1:3 in base and jointed with
white cement slurry etc.
Grey Cement 0.188 Sqm
White Cement 0.050 Sqm
55 Marble stone slab flooring over 20 mm thick base of lime mortar 1:1:1 and jointed with white
cement slurry etc. - White Cement 0.015 Sqm
56 Marble stone slab flooring over 20 mm thick base of Cement mortar 1:4 and jointed with
white cement slurry etc.
a) 20mm thick
Grey Cement 0.255 Sqm
White Cement 0.015 Sqm
b) 30mm thick
Grey Cement 0.258 Sqm
White Cement 0.015 Sqm
c) 40mm thick
Grey Cement 0.262 Sqm
White Cement 0.015 Sqm
57 Marble tiles 18 to 24 mm thick in risers of steps,skirting,dado,walls and pillars, laid on 12mm
thick cement mortar 1:3 and jointed with white cement slurry.
Grey Cement 0.232 Sqm
White Cement 0.015 Sqm
58 Extra for each additional thickness of 5 mm granolithic layer of 1:2:4 for flooring 0.003 Sqm
59 12 mm thick cement plaster skirting,dado,risers of steps and edges of ground sink with CM
1:3 finished with a floating coat of neat cement 0.160 Sqm
60 15 mm thick cement plaster skirting,dado,risers of steps and edges of ground sink with CM
1:3 finished with a floating coat of neat cement 0.199 Sqm
61 19 mm thick cement plaster skirting,dado with 12 mm thick backing with CM 1:3 and 7 mm
topping 1:1 with stone chips finished with a floating coat of neat cement 0.270 Sqm
62 25 mm thick cement plaster skirting,dado with 18 mm thick backing with CM 1:3 and 7 mm
topping 1:1 with stone chips finished with a floating coat of neat cement 0.370 Sqm
63 Marble work in steps, jambs, walls, pillars and other plain work in CM 1:4 including pointing
with White cement mortar 1:2
Grey Cement 0.140 Per Cum
White Cement 1.520 Per Cum
64 Marble work for all lining (Veneer work) 1.8 to 2.4 cm tk in CM 1:3 including pointing with
white cement mortar 1:2
Grey Cement 0.143 Sqm
White Cement 0.034 Sqm
65 Marble work for all lining (Veneer work) 4 cm tk in CM 1:3 including pointing with white
cement mortar 1:2
Grey Cement 0.204 Sqm
White Cement 0.034 Sqm
66 Grading roof for water proofing treatment
a) CC 1:2:4 6.400 Per Cum of conc.
b) CM 1:3 10.200 Per Cum of Mor
c) CM 1:4 7.600 Per Cum of Mor
67 Providing and fixing MS fan clamps of standard shape and fix in existing RC slab including
cutting chase and making good 0.032 Each
68 Making Plinth Protection 540mm tk of CC 1:3:6 over 75mm bed of dry brick ballast 40mm
nominal size, well rammed and consolidated and grouted with fine sand including finishing
the top smooth. 0.220 Sqm
69 Finishing edges of CC sunk floors, plastered with CM 1:2 incl. Rounding the same and
finished even and smooth with a floating coat of neat cement. 0.030 Sqm
70 Grouting with
CM 1:2 14.360 Cum
CM 1:3 10.800 Cum
71 DPC 25 tk in CC 1:2:4 0.162 Sqm
72 Making Plinth protection with bricks on edge in CM 1:6 over 7.5 cm bed of dry brick
aggregate 40 mm nominal size rammed, consolidated and grouted with fine sand and top of
bricks pointed with CM 1:2 0.172 Sqm
73 Providing and fixing 25mm dia GI Pipe outlet in CM 1:3. 0.010 Rm
74 Providing and fixing 40mm dia GI Pipe outlet in CM 1:3. 0.015 Rm
Providing chases 75mm wide 50mm deep in walls for conduit pipe, filling the same with CC
75 1:3:6 0.015 Rm
76 Fixing steel windows with 1:2:4 concrete blocks 0.080 Rm
77 Cement Sand Mortar
a) 1:1 20.400 Cum
b) 1:2 13.600 Cum
c) 1:3 10.200 Cum
d) 1:4 7.600 Cum
e) 1:5 6.200 Cum
f) 1:6 5.000 Cum

Drinage/Sanitary & Water Supply Installations

1 Fixing IWC with Cistern 0.250 Each
2 Fixing EWC 0.020 Each
3 Fixing Wash basin,Kitchen sink 0.050 Each
4 Fixing Urinal cistern incl.pipe 0.050 Each
5 Fixing Drain Board 0.020 Each
6 Fixing & Finishig floor trap 0.030 Each
7 Fixing GI Pipes of all dia (Concealed) 0.001 Rm
8 Jointing SW pipe with CM 1:1
a) 100 mm dia 0.434 Rm
b) 150 mm dia 0.646 Rm
c) 200 mm dia 0.866 Rm
d) 230 mm dia 0.974 Rm
e) 250 mm dia 1.080 Rm
f) 300 mm dia 1.294 Rm
g) 450 mm dia 1.954 Rm
9 Laying CC 1:5:10 alround SW pipe including bed conc.asper standard design
a) 100 mm dia 0.385 Rm
b) 150 mm dia 0.471 Rm
c) 200 mm dia 0.549 Rm
d) 230 mm dia 0.601 Rm
e) 250 mm dia 0.634 Rm
f) 300 mm dia 0.728 Rm
g) 350 mm dia 0.824 Rm
h) 400 mm dia 0.920 Rm
i) 450 mm dia 1.014 Rm
10 Gully Chamber 0.770 Each
11 Stop cock Chamber 0.370 Each
12 Inspection Chamber
a) 600 x 600 x 600mm deep 2.860 Each
b) 600 x 400 x 600mm deep 2.300 Each
c) 750 x 600 x 600mm deep 2.870 Each
d) 900 x 900 x 600mm deep 3.770 Each
e)1200 x 900 x 1200mm deep 7.000 Each
13 Extra Depth of Inspection Chambers
a) 600 x 600 1.610 Rm Of Depth
b) 750 x 600 2.590 Rm Of Depth
c) 900 x 900 2.920 Rm Of Depth
d)1200 x 900 3.670 Rm Of Depth
 339.024

as per CCCL
for design mix

0
Description unit Cement Sand Aggregates Bricks C. Blocks Boulder Bond StonSize Srones
40mm 20mm Holl / Soli
bags Cum Cum Cum Nos Nos Cum Nos Nos

Concrete Works

PCC 1:5:10 2.70 0.60 0.95

PCC 1:4:8 3.24 0.60 0.95
PCC 1:3:6 4.46 0.60 0.90
PCC 1:2:4 6.36 0.60 0.90
PCC 1:1,5:3 8.00 0.60 0.90
PCC 7.5 3.60 0.60 0.90
PCC M10 4.40 0.60 0.90
RCC M15 5.60 0.60 0.90
RCC M20 6.20 0.60 0.85
RCC M25 7.20 0.60 0.85
RCC M30 8.00 0.60 0.85
RCC M35 8.80 0.60 0.85
RCC M40 9.60 0.55 0.85
RCC M45 10.40 0.55 0.85

Note:
if the Min Cement content specified by Client is more than the aboven then Clients norms shall be adopted
Sand Consumtion are inclusive of bulkage
For Prestressed Concrete works, the Mac cement Content is limited to 10.6Bags per cum
For bored Cast insitu pile concrete, the following shall be adopted
RCC M20 400 Kgs
RCC M25 445 Kgs
RCC M30 495 Kgs
RCC M35 545 Kgs

MASONRY WORKS
BW CM 1:3 - Table Moulded Bricks Cum 2.34 0.300 450
BW CM 1:4 - Table Moulded Bricks Cum 1.74 0.300 450
BW CM 1:5 - Table Moulded Bricks Cum 1.42 0.300 450
Description unit Cement Sand Aggregates Bricks C. Blocks Boulder Bond StonSize Srones
40mm 20mm Holl / Soli
bags Cum Cum Cum Nos Nos Cum Nos Nos
BW CM 1:6 - Table Moulded Bricks Cum 1.25 0.280 450
Half BW CM 1:3 - Table Moulded Bric Sqm 0.27 0.035 52
Half BW CM 1:4 - Table Moulded Bric Sqm 0.21 0.035 52
200mm tk Block Masonry in CM 1:3 Sqm 0.25 0.030 12.5
200mm tk Block Masonry in CM 1:4 Sqm 0.20 0.030 12.5
200mm tk Block Masonry in CM 1:5 Sqm 0.15 0.030 12.5
150mm tk Block Masonry in CM 1:3 Sqm 0.20 0.022 12.5
150mm tk Block Masonry in CM 1:4 Sqm 0.14 0.022 12.5
150mm tk Block Masonry in CM 1:5 Sqm 0.12 0.022 12.5
100mm tk Block Masonry in CM 1:3 Sqm 0.13 0.015 12.5
100mm tk Block Masonry in CM 1:4 Sqm 0.10 0.015 12.5
RR Masonry in CM 1:6 Cum 1.65 0.350 1.3 9
SS Masonry in CM 1:6 Cum 1.50 0.320 15 90
SS Masonry in CM 1:5 Cum 1.98 0.350 15 90

PLASTERING WORKS
12mm tk CM 1:3 Sqm 0.15 0.015
12mm tk CM 1:3 Sqm 0.11 0.015
12mm tk CM 1:3 Sqm 0.09 0.015
12mm tk CM 1:3 Sqm 0.07 0.015
15mm tk CM 1:3 Sqm 0.18 0.018
15mm tk CM 1:4 Sqm 0.13 0.018
15mm tk CM 1:5 Sqm 0.11 0.018
15mm tk CM 1:6 Sqm 0.09 0.018
20mm tk CM 1:3 Sqm 0.23 0.03
20mm tk CM 1:4 Sqm 0.18 0.03
20mm tk CM 1:5 Sqm 0.14 0.03
20mm tk CM 1:6 Sqm 0.11 0.03
18mm tk in 2 coats (12mm tk in CM Sqm 0.13 0.03
1:5 & 6mm tk in CM 1:6)
18mm tk in 2 coats (12mm tk in CM
1:5 & 6mm tk in CM 1:3) Sqm 0.18 0.03
6mm tk Ceiling Plastering in CM 1:3 Sqm 0.07 0.01
Description unit Cement Sand Aggregates Bricks C. Blocks Boulder Bond StonSize Srones
40mm 20mm Holl / Soli
bags Cum Cum Cum Nos Nos Cum Nos Nos
6mm tk Ceiling Plastering in CM 1:4 Sqm 0.05 0.01
Where Plaster is to be finished with a floating coat of neat cement, take 2.2kg per sqm extra cement