Scribd
Upload
468 views

Dog FreePattern2

The document provides instructions for making a Tilda Friends Dog toy out of fabric. It lists the materials needed which include fabric, embroidery yarn, fiberfill stuffing. It also recommends a sewing machine and supplies. The instructions then describe how to cut out and sew the body, legs, arms, ears patterns. It details how to turn the pieces right side out and stuff them. Finally, it explains how to attach the limbs, ears, nose and add eyes and cheeks to complete the dog. Patterns are provided at the end.

Uploaded by

L Reginato
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
468 views

Dog FreePattern2

The document provides instructions for making a Tilda Friends Dog toy out of fabric. It lists the materials needed which include fabric, embroidery yarn, fiberfill stuffing. It also recommends a sewing machine and supplies. The instructions then describe how to cut out and sew the body, legs, arms, ears patterns. It details how to turn the pieces right side out and stuff them. Finally, it explains how to attach the limbs, ears, nose and add eyes and cheeks to complete the dog. Patterns are provided at the end.

Uploaded by

L Reginato
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

1

Tilda Friends Dog


Height: 47cm (18½in)

The Dog can be made in any Tilda Doll Fabric colour, for example Caramel (140002).

You will need


• Tilda doll fabric 55cm x 50cm (21¾in x 19¾in) for the body
• Embroidery yarn in similar colour to skin fabric, for sewing on arms and legs (optional)
• Embroidery yarn for the snout in a grey-brown or brown colour
• Fiberfill approx. 170g

We also recommend using the following:


• Sewing machine
• Matching thread and a sewing needle for hand sewing
• Larger needle for embroidery yarn
• Flower stick or chopstick for turning and stuffing
• Thick paper for copying patterns
• Black hobby paint and a small metal-headed pin for eyes
• Soft pink lipstick, rouge or stamp pad, and a dry brush for rosy cheeks

Making the Dog


1 Refer to the bullet points below on making the project and read all the project
instructions through before you start.
• We suggest copying or gluing all the pattern pieces onto thick paper and then cutting
out the shapes.
• When sewing the seams, reduce your stitch length to 1.5mm–1.6mm.
• Unless otherwise instructed, sew on the outer line of the pattern. Generally, no seam
allowances are included in the patterns, except for areas marked with ES (extra seam
allowance).
• Cut out the shapes after sewing, cutting ⅛in–¼in (3mm–6mm) outside the sewn line.
• To get a good shape, cut snips in the seam allowance where seams curve tightly inwards.
• Stuff well, using a stick to fill small areas.
• Sew up openings with matching thread and small slipstitches.

2 Fold the piece of doll fabric right sides together, so it’s about 11in x 19¾in (27.5cm x
50cm), and press. Using the patterns, draw one body, two legs, two arms and two ears. Mark
the openings and then sew around the pieces. Note that the opening in the head and at the
bottom of the body should be open, except for two small seams on each side at the bottom,
which are only there to keep the fabric together. Sew all the way around the ears. (see Fig A).

3 Cut out the pieces with an approximate ⅛in (4mm) seam allowance, but add extra seam
allowances by the openings (see Fig B). Cut notches where seams curve inwards.
Place the ears, mirrored, on the table and cut through one of the fabric layers in each ear.
2

Fig A Fig B

4 Fold the fabric on each side of the opening at the bottom of the body, placing the seams
over and under each other, as shown by the arrows in Fig C, and then sew together, as shown
in Fig D.

Fig C Fig D

5 Fold up the opening on the top of the head, placing the seams on top of each other, and then
sew up the opening, as shown in Fig E.
3

Fig E

6 Turn all of the parts through to the right side, fold in the seam allowance by the openings,
and then press. The opening in the ears will be hidden against the head.
When turning thin arms and legs it is helpful to separate the two fabric layers by using your
thumb and forefinger and then place the blunt end of a flower stick or similar tool against the
end of the foot/hand (see Fig F). Use the stick to push the fabric through the leg/arm and up
through and out of the turning opening (Fig G). Now pull the rest through the opening and
use the stick to push through the top part.

Fig F Fig G
4

7 Stuff the body, arms and legs and sew up the openings. To sew on the limbs, use a large
needle and a doubled sewing thread (or embroidery yarn) to sew from one arm, right through
the body, through the second arm and then back again. Repeat this, two or three times, to
secure the arms tightly to the body (Fig H). This will enable them to move easily. Sew on the
legs the same way.

Fig H

8 Attach the ears with pins before sewing them in place with a few stitches along the top (Fig
I). Sew the nose with satin stitch and embroidery yarn. Stamp eyes onto the face using a metal
pin with a small head, dipped in black hobby paint. When the eyes are dry, create rosy cheeks
using lipstick or rouge and a dry brush.

Fig I
Patterns
Add a seam allowance to all pattern
pieces. The edges of the patterns
mark the seams.
Dotted lines indicate openings and
folded edges. ES stands for Extra
Seam allowance and appears by
openings where it is important to
continue the seam to the very end
of the seam allowance. This ES is
included in the pattern, and where it
appears there is no need to add the
normal allowance too.
Please check this ruler to ensure that you are printing in 100%. Pages are made in A4.

0 inches 1 2 3 4 5 6

0 mm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

You might also like