Scribd
Upload
176 views2 pages

Load Analysis Transverse

The document calculates the dead loads on beams in a building over 3 floors. The dead loads include the self-weight of the beams, ceiling loads, slab weights, tile and plaster weights. For one-way slabs, the load is calculated as 0.5 * load * span. For triangle slabs, the load is 0.33 * load * span. The total load is then calculated for each beam by adding the self-weight of the beam to the calculated floor load over the beam span. Loads increase with each higher floor due to additional finishes like tiles and concrete block walls.

Uploaded by

Shōya Ishida
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
176 views2 pages

Load Analysis Transverse

The document calculates the dead loads on beams in a building over 3 floors. The dead loads include the self-weight of the beams, ceiling loads, slab weights, tile and plaster weights. For one-way slabs, the load is calculated as 0.5 * load * span. For triangle slabs, the load is 0.33 * load * span. The total load is then calculated for each beam by adding the self-weight of the beam to the calculated floor load over the beam span. Loads increase with each higher floor due to additional finishes like tiles and concrete block walls.

Uploaded by

Shōya Ishida
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Dead Load

Transverse

A. Roof
Beam AB, BC, CD, DE
SELF-WEIGHT
 Weight of Beam (W30x447) 2.6037 KN/m
Load
 Ceiling 0.48 KPa
For one-way slab For triangle slab
W =0.48(3 /2) W =0.48(3 /3)
W =0.72 KN / m W =0.48 KN /m

Beam AB
W =0.72(2)+ Self weight of beam
W =0.72(2)+ 2.6037
W =4.0437 KN /m

Beam BC
W =0.48+2.6037
W =3.0 8 37

Beam CD∧DE
W =0.72+Self weight of beam
W =0.72+2.6037
W =3.3237 KN /m

3rd floor
Beam AB, BC, CD, DE
SELF-WEIGHT
 Weight of Beam (W30x447) 2.6037 KN/m
Load
 Ceiling 0.48 KPa
 Slab (0.15) 24(0.15)
 Tiles 0.77 KPa
 Plaster on tiles 0.24 KPa
5.09 KPa
For one-way slab For triangle slab
W =5.09(3/2) W =5.09(3/3)
W =7.635 KN /m W =5.09 KN /m

Beam FG
W =7.635(2)+ Self weight of beam
W =7.635(2)+ 2.6037
W =17.8737 KN /m

Beam GH
W =5.09+2.6037
W =7.6937 KN /m

Beam HI∧IJ
W =7.635+Self weight of beam
W =7.635+2.6037
W =10.2387 KN /m

2nd floor
Beam AB, BC, CD, DE
SELF-WEIGHT
 Weight of Beam (W30x447) 2.6037 KN/m
Load
 Ceiling 0.48 KPa
 Slab (0.15) 24(0.15)
 Tiles 0.77 KPa
 Plaster on tiles 0.24 KPa
 CHB ( 4 inch-thick) 2.73 KPa
7.82KPa
For one-way slab For triangle slab
W =7.82(3/2) W =7.82(3/3)
W =11.73 KN /m W =7.82 KN / m

Beam KL
W =11.73(2)+ Self weight of beam
W =11.73(2)+ 2.6037
W =26.0637 KN /m

Beam LM
W =7.82+ 2.6037
W =10.4237 KN /m

Beam MN∧NO
W =11.73+Self weight of beam
W =7.635+2.6037
W =14.3337 KN /m

You might also like