Scribd
Upload
262 views1 page

Product Data Sheet E'GRID SX2020: Bi-Axial Geogrid

This document provides product data for E'GRID SX2020 bi-axial geogrid. It lists properties such as aperture shape and size, rib dimensions and spacing, mechanical strengths, durability, and chemical resistance. Testing was done according to various ASTM standards. E'GRID SX2020 geogrid is made of high density polyethylene with rectangular rib shapes and has an ultimate tensile strength of 20 kN/m in both machine and cross directions.

Uploaded by

Robert Gomez Flor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
262 views1 page

Product Data Sheet E'GRID SX2020: Bi-Axial Geogrid

This document provides product data for E'GRID SX2020 bi-axial geogrid. It lists properties such as aperture shape and size, rib dimensions and spacing, mechanical strengths, durability, and chemical resistance. Testing was done according to various ASTM standards. E'GRID SX2020 geogrid is made of high density polyethylene with rectangular rib shapes and has an ultimate tensile strength of 20 kN/m in both machine and cross directions.

Uploaded by

Robert Gomez Flor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Bi-Axial Geogrid www.bostd.

com

PRODUCT DATA SHEET

E’GRID SX2020

U.S. Standard Metric


PROPERTY PROCEDURE MD XMD MD XMD
Geometric1
Aperture Shape Observed Square
Aperture Open Area Measured 78%
Rib Spacing(pitch) Measured 1.6inch 1.6inch 40mm 40mm
Rib Depth(height or thickness) Measured 0.06inch 0.03inch 1.5mm 0.7mm
Rib Width Measured 0.09inch 0.12inch 2.3mm 3.1mm
Rib Length(c to c of nodes) Measured 1.6inch 1.6inch 40mm 40mm
Rib Shape(cross section) Measured Rectangular
Mechanical2,3
Tensile Strength-Ultimate 1,370lbs/ft 1,370lbs/ft 20kN/m 20kN/m
ASTM D6637-09
Tensile Load @2% Strain 479lbf/ft 479lbf/ft 7kN/m 7kN/m
Procedure B
Tensile Load @5% Strain 959lbf/ft 959lbf/ft 14kN/m 14kN/m
Junction Efficiency4 GRI-GG2-05 95%
Flexural Rigidity ASTM D1388 mod 700,000mg-cm
Aperture Stability5 US COE 3.3 cm-kg/deg = 0.32 m-N/deg
Durability
ASTM
UV Degradation Resistance1,6,8 100%
D4355/D6637
Carbon Black Content3 ASTM D1603 0.5%
Chemical Damage
EPA 9090A 100%
Resistance1,7,8

Note:
1. Nominal Value(s)
2. All mechanical properties are based on the manufacturer’s laboratory test results at 21±1⁰C
3. Unless indicated otherwise, values shown are minimum average roll values determinate in accordance with
ASTM D4759-02
4. Expressed as a comparison of GRI-GG2 strength to GRI-GG1 strength of the same sample
5. Resistance to in-plane rotational moment of 20 kg-cm
6. 500 hour exposure
7. 120 day emersion testing
8. Expressed as a percentage of Ultimate Tensile Strength

E’GRID is a Registered Trade Mark


BOSTD Geosynthetics Qingdao Ltd. Declares that all information is correct at the time of printing but reserves the right to make changes at any time.

BOSTD Geosynthetics Qingdao Ltd.


Address: Qingda Industrial Zone, Chengyang District,
Qingdao, Shandong, 266111, China
Tel: +86 10 82842590,91,92 Fax: +86 10 8284 2578
Email: [email protected] Website: www.bostd.com

You might also like