Navi Station: Total Station With Integrated GNSS

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

SPECIFICATIONS

Distance Measurement Range *¹ 5000m


with Reflector Accuracy ±(2+2ppmxD)mm
Measure Interval Fine: 0.3s, Tracking: 0.1s
Distance Measurement Range *² 800/1500/2000m Optional
without Reflector Accuracy ±(3+2ppmxD)mm
Measure Interval 0.3-3s
Angle Measurement Accuracy
Measure Method (HZ/V)
Diameter of Encoder Disk
2”
Absolute Continuous, Diametrical
79mm
Navi Station
Display Resolution
Compensation
0.1”
Liquid, Dual Axis Compensation
Total Station with Integrated GNSS
Compensator Setting Accuracy 1”
Compensator Range ±4'
Telescope Image Erect
Tube Length 154mm
Effective Aperture 45mm (EDM:50mm)
Magnification 30x
Resolving Power 3”
Field of View 1°30"
Focusing Range 1.2m
Reticle Illuminated, 4 Brightness Level
Vial Plate Vial 30"/2mm
Circular Vial 8'/2mm
Laser Plummet Type Laser Class 2/IEC60825-1; 4 Brightness Level
Accuracy ±1.5mm at 1.5M Instrument Height
System Config Operating System Android 6.0
Processor MT6753
Internal Memory RAM: 3GB; ROM: 32GB
Satellite Signals Satellite Tracking 574 Channels
Signal Tracking BDS-2: B1, B2, B3
GPS: L1, L2C, L2P, L5
GLONASS: L1, L2
GALILEO: E1, E5a, E5b
SBAS
Performance Specification Time to First Fix Cold Start <50s, Warm Start <45s
Signal Re-acquisition <3s
RTK Initiation Time <15s
RTK Initiation Reliability >99.9%
Positioning Precision Single Point Positioning Single: H≤3m, V≤5m (1σ, PDOP≤4)
RTD Surveying H: ±0.5m, V: ±1.0m
Static Surveying H: ±(2.5mm+1ppm x D), V: ±(5mm+1ppm x D)
Real-time Kinematic Surveying H: ±(10mm+1ppm x D), V: ±(20mm+1ppm x D)
Communication Interfaces - Serial Port (6-Pin)
- Micro SIM
- USB Type C (OTG)
- TF Card
Network 2G 900/1800
3G 2100/900 CDMA BC0 TDSCDMA A/F
4G LTE band1/3/7/38/39/40/41
Bluetooth Bluetooth 4.0
WLAN Dual-Band Single Stream 802.11 a/b/g/n RF for Data Link
Microphone / Speaker Available
Others Display TFT LCD Screen, Graphics, 720*1280
Battery Lithium-Ion, 7.4V, Operating 8-10 Hours
Dimension 200mm*170mm*350mm, 5.7kgs
Protection IP55
Temperature Range (Operation) -20°C--+50°C • Fully Integrated GNSS
• Simply Setup the Station Wherever You Want
* 1: Good conditions (good visibility approx.40km, overcast, twilight)
* 2: White objects with high reflectivity (KGC 90%)
• Without the Limitation of Known Points
• Up to 2000m Reflectorless EDM
Note: all information above is subject to change without any prior notice.
• Cable-free Connection by Bluetooth
• Intelligent Workflow under Android 6.0
SOUTH SURVEYING & MAPPING TECHNOLOGY CO., LTD.
Add: South Geo-information Industrial Park, No.39 Si Cheng Rd, Guangzhou, China Version: Navi Station 1.0
http://www.southinstrument.com
FREELY POSITION SUPERIOR CONVENIENCE
Simply Setup the Station
tion Wherever
er You
Y Want
Want Without the Limitation of Known Points

With Navi Station, it's not necessary to worry about the unknown control points, traverse or the influence of
obstacle on the ground. No matter how many difficulties you have met, Navi Station helps you define the
position and orientation freely with superior convenience and maximum flexibility.

Case Study ▶▶▶


Total Station with Integrated GNSS Topographic Measurement Stake Out in Construction Site
Features Android O.S, Navi Station provides an intelligent
ent solution
tion. Simply setup and
that integrates GNSS receiver on Total Station.
eceiver to
determine the position of occupied point by GNSS receiver
centimetre accuracy, among the range of 40 km from om a reference
fectively
station. Navi Station allows you to work quickly and effectively
right from the beginning.

Dual Laser EDM Stable Measurement


ement
• 2000m Non-prism • Accuracy: 2+2ppm
• Stronger return signal due to Its • Extremely fastt (0.3s) speed
under fine mode
Mission: Plan to measure an area with large amount Mission: Plan to stake-out the position of buildings,
dual laser technology
of elements like houses, trees, vegetations on the facilities or roads on the site. Due to the limitation
ground. There are no control points nearby but a of working environment and the obstacle, most of
GNSS reference station 20km away from this area. them are unable to set a RTK rover stably,

• By Traditional Method: • By Traditional Method:


Measure and record several points by GNSS Before stake-out, it is necessary to have the data of
receiver. Total station will setup and orient by two of control points. However, in the construction site,
USB OTG, TF Card & Bluetooth 5.0 Inch Color & Touch
ouch Screen those known points. It's necessary to use two sets those points are often covered by equipment or
• Flexible transfer of data • Built-in high resolution
esolution display of equipment on the field and the surveyor will feel materials. Under such kind of situation, it takes time
via PC or PDA Numerical Keypad inconvenient when they need to measure the and effort for total station to move the station and
WLAN & 4G Module • Faster
er and easier input of data occupied points twice by GNSS receiver and total do the traverse measurement when the sight of
• Quick access to Internet
station separately. view is not good enough.

• By Navi Station: • By Navi Station:


Set up the Navi Station wherever it's convenient. With Navi Station you don't need to worry about
Define the coordinate of occupied point P1 by its control points, traverses or sight of view. Navi
integrated GNSS receiver. Then aim at an unknown Station will help you define the position of occupied
point P2 as backsight. Measure the data of this area point and backsight quickly by the integrated GNSS
Intelligent O.S All Constellations after orientation. Move the station to the unknown receiver. Benefit from its easy-to-understand
• Android 6.0 O.S • Enable the satellitee tracking point P2 and use the first station P1 as backsight. graphical guidance and fast navigation inside the
• User friendliness ONASS and
from BDS, GPS, GLONASS Based on the defined coordinate, our Navi Station software, stake-out the points by Navi Station will be
• Free SDK package for developer Galileo with 574 channels will re-calculate the position of points which easier and simpler with minimum requirements and
• Horizontal: 10+1ppm Vertical: 20+1ppm measured at the first station. maximum flexibility.

You might also like